| /* |
| * Atmel ADC driver for SAMA5D2 devices and compatible. |
| * |
| * Copyright (C) 2015 Atmel, |
| * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/sched.h> |
| #include <linux/wait.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/regulator/consumer.h> |
| |
| /* Control Register */ |
| #define AT91_SAMA5D2_CR 0x00 |
| /* Software Reset */ |
| #define AT91_SAMA5D2_CR_SWRST BIT(0) |
| /* Start Conversion */ |
| #define AT91_SAMA5D2_CR_START BIT(1) |
| /* Touchscreen Calibration */ |
| #define AT91_SAMA5D2_CR_TSCALIB BIT(2) |
| /* Comparison Restart */ |
| #define AT91_SAMA5D2_CR_CMPRST BIT(4) |
| |
| /* Mode Register */ |
| #define AT91_SAMA5D2_MR 0x04 |
| /* Trigger Selection */ |
| #define AT91_SAMA5D2_MR_TRGSEL(v) ((v) << 1) |
| /* ADTRG */ |
| #define AT91_SAMA5D2_MR_TRGSEL_TRIG0 0 |
| /* TIOA0 */ |
| #define AT91_SAMA5D2_MR_TRGSEL_TRIG1 1 |
| /* TIOA1 */ |
| #define AT91_SAMA5D2_MR_TRGSEL_TRIG2 2 |
| /* TIOA2 */ |
| #define AT91_SAMA5D2_MR_TRGSEL_TRIG3 3 |
| /* PWM event line 0 */ |
| #define AT91_SAMA5D2_MR_TRGSEL_TRIG4 4 |
| /* PWM event line 1 */ |
| #define AT91_SAMA5D2_MR_TRGSEL_TRIG5 5 |
| /* TIOA3 */ |
| #define AT91_SAMA5D2_MR_TRGSEL_TRIG6 6 |
| /* RTCOUT0 */ |
| #define AT91_SAMA5D2_MR_TRGSEL_TRIG7 7 |
| /* Sleep Mode */ |
| #define AT91_SAMA5D2_MR_SLEEP BIT(5) |
| /* Fast Wake Up */ |
| #define AT91_SAMA5D2_MR_FWUP BIT(6) |
| /* Prescaler Rate Selection */ |
| #define AT91_SAMA5D2_MR_PRESCAL(v) ((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET) |
| #define AT91_SAMA5D2_MR_PRESCAL_OFFSET 8 |
| #define AT91_SAMA5D2_MR_PRESCAL_MAX 0xff |
| #define AT91_SAMA5D2_MR_PRESCAL_MASK GENMASK(15, 8) |
| /* Startup Time */ |
| #define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16) |
| #define AT91_SAMA5D2_MR_STARTUP_MASK GENMASK(19, 16) |
| /* Analog Change */ |
| #define AT91_SAMA5D2_MR_ANACH BIT(23) |
| /* Tracking Time */ |
| #define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24) |
| #define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff |
| /* Transfer Time */ |
| #define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28) |
| #define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3 |
| /* Use Sequence Enable */ |
| #define AT91_SAMA5D2_MR_USEQ BIT(31) |
| |
| /* Channel Sequence Register 1 */ |
| #define AT91_SAMA5D2_SEQR1 0x08 |
| /* Channel Sequence Register 2 */ |
| #define AT91_SAMA5D2_SEQR2 0x0c |
| /* Channel Enable Register */ |
| #define AT91_SAMA5D2_CHER 0x10 |
| /* Channel Disable Register */ |
| #define AT91_SAMA5D2_CHDR 0x14 |
| /* Channel Status Register */ |
| #define AT91_SAMA5D2_CHSR 0x18 |
| /* Last Converted Data Register */ |
| #define AT91_SAMA5D2_LCDR 0x20 |
| /* Interrupt Enable Register */ |
| #define AT91_SAMA5D2_IER 0x24 |
| /* Interrupt Disable Register */ |
| #define AT91_SAMA5D2_IDR 0x28 |
| /* Interrupt Mask Register */ |
| #define AT91_SAMA5D2_IMR 0x2c |
| /* Interrupt Status Register */ |
| #define AT91_SAMA5D2_ISR 0x30 |
| /* Last Channel Trigger Mode Register */ |
| #define AT91_SAMA5D2_LCTMR 0x34 |
| /* Last Channel Compare Window Register */ |
| #define AT91_SAMA5D2_LCCWR 0x38 |
| /* Overrun Status Register */ |
| #define AT91_SAMA5D2_OVER 0x3c |
| /* Extended Mode Register */ |
| #define AT91_SAMA5D2_EMR 0x40 |
| /* Compare Window Register */ |
| #define AT91_SAMA5D2_CWR 0x44 |
| /* Channel Gain Register */ |
| #define AT91_SAMA5D2_CGR 0x48 |
| |
| /* Channel Offset Register */ |
| #define AT91_SAMA5D2_COR 0x4c |
| #define AT91_SAMA5D2_COR_DIFF_OFFSET 16 |
| |
| /* Channel Data Register 0 */ |
| #define AT91_SAMA5D2_CDR0 0x50 |
| /* Analog Control Register */ |
| #define AT91_SAMA5D2_ACR 0x94 |
| /* Touchscreen Mode Register */ |
| #define AT91_SAMA5D2_TSMR 0xb0 |
| /* Touchscreen X Position Register */ |
| #define AT91_SAMA5D2_XPOSR 0xb4 |
| /* Touchscreen Y Position Register */ |
| #define AT91_SAMA5D2_YPOSR 0xb8 |
| /* Touchscreen Pressure Register */ |
| #define AT91_SAMA5D2_PRESSR 0xbc |
| /* Trigger Register */ |
| #define AT91_SAMA5D2_TRGR 0xc0 |
| /* Mask for TRGMOD field of TRGR register */ |
| #define AT91_SAMA5D2_TRGR_TRGMOD_MASK GENMASK(2, 0) |
| /* No trigger, only software trigger can start conversions */ |
| #define AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER 0 |
| /* Trigger Mode external trigger rising edge */ |
| #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE 1 |
| /* Trigger Mode external trigger falling edge */ |
| #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL 2 |
| /* Trigger Mode external trigger any edge */ |
| #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY 3 |
| |
| /* Correction Select Register */ |
| #define AT91_SAMA5D2_COSR 0xd0 |
| /* Correction Value Register */ |
| #define AT91_SAMA5D2_CVR 0xd4 |
| /* Channel Error Correction Register */ |
| #define AT91_SAMA5D2_CECR 0xd8 |
| /* Write Protection Mode Register */ |
| #define AT91_SAMA5D2_WPMR 0xe4 |
| /* Write Protection Status Register */ |
| #define AT91_SAMA5D2_WPSR 0xe8 |
| /* Version Register */ |
| #define AT91_SAMA5D2_VERSION 0xfc |
| |
| #define AT91_SAMA5D2_HW_TRIG_CNT 3 |
| #define AT91_SAMA5D2_SINGLE_CHAN_CNT 12 |
| #define AT91_SAMA5D2_DIFF_CHAN_CNT 6 |
| |
| /* |
| * Maximum number of bytes to hold conversion from all channels |
| * plus the timestamp |
| */ |
| #define AT91_BUFFER_MAX_BYTES ((AT91_SAMA5D2_SINGLE_CHAN_CNT + \ |
| AT91_SAMA5D2_DIFF_CHAN_CNT) * 2 + 8) |
| |
| #define AT91_BUFFER_MAX_HWORDS (AT91_BUFFER_MAX_BYTES / 2) |
| |
| #define AT91_SAMA5D2_CHAN_SINGLE(num, addr) \ |
| { \ |
| .type = IIO_VOLTAGE, \ |
| .channel = num, \ |
| .address = addr, \ |
| .scan_index = num, \ |
| .scan_type = { \ |
| .sign = 'u', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| }, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ |
| .datasheet_name = "CH"#num, \ |
| .indexed = 1, \ |
| } |
| |
| #define AT91_SAMA5D2_CHAN_DIFF(num, num2, addr) \ |
| { \ |
| .type = IIO_VOLTAGE, \ |
| .differential = 1, \ |
| .channel = num, \ |
| .channel2 = num2, \ |
| .address = addr, \ |
| .scan_index = num + AT91_SAMA5D2_SINGLE_CHAN_CNT, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| }, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ |
| .datasheet_name = "CH"#num"-CH"#num2, \ |
| .indexed = 1, \ |
| } |
| |
| #define at91_adc_readl(st, reg) readl_relaxed(st->base + reg) |
| #define at91_adc_writel(st, reg, val) writel_relaxed(val, st->base + reg) |
| |
| struct at91_adc_soc_info { |
| unsigned startup_time; |
| unsigned min_sample_rate; |
| unsigned max_sample_rate; |
| }; |
| |
| struct at91_adc_trigger { |
| char *name; |
| unsigned int trgmod_value; |
| unsigned int edge_type; |
| }; |
| |
| struct at91_adc_state { |
| void __iomem *base; |
| int irq; |
| struct clk *per_clk; |
| struct regulator *reg; |
| struct regulator *vref; |
| int vref_uv; |
| struct iio_trigger *trig; |
| const struct at91_adc_trigger *selected_trig; |
| const struct iio_chan_spec *chan; |
| bool conversion_done; |
| u32 conversion_value; |
| struct at91_adc_soc_info soc_info; |
| wait_queue_head_t wq_data_available; |
| u16 buffer[AT91_BUFFER_MAX_HWORDS]; |
| /* |
| * lock to prevent concurrent 'single conversion' requests through |
| * sysfs. |
| */ |
| struct mutex lock; |
| }; |
| |
| static const struct at91_adc_trigger at91_adc_trigger_list[] = { |
| { |
| .name = "external_rising", |
| .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE, |
| .edge_type = IRQ_TYPE_EDGE_RISING, |
| }, |
| { |
| .name = "external_falling", |
| .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL, |
| .edge_type = IRQ_TYPE_EDGE_FALLING, |
| }, |
| { |
| .name = "external_any", |
| .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY, |
| .edge_type = IRQ_TYPE_EDGE_BOTH, |
| }, |
| }; |
| |
| static const struct iio_chan_spec at91_adc_channels[] = { |
| AT91_SAMA5D2_CHAN_SINGLE(0, 0x50), |
| AT91_SAMA5D2_CHAN_SINGLE(1, 0x54), |
| AT91_SAMA5D2_CHAN_SINGLE(2, 0x58), |
| AT91_SAMA5D2_CHAN_SINGLE(3, 0x5c), |
| AT91_SAMA5D2_CHAN_SINGLE(4, 0x60), |
| AT91_SAMA5D2_CHAN_SINGLE(5, 0x64), |
| AT91_SAMA5D2_CHAN_SINGLE(6, 0x68), |
| AT91_SAMA5D2_CHAN_SINGLE(7, 0x6c), |
| AT91_SAMA5D2_CHAN_SINGLE(8, 0x70), |
| AT91_SAMA5D2_CHAN_SINGLE(9, 0x74), |
| AT91_SAMA5D2_CHAN_SINGLE(10, 0x78), |
| AT91_SAMA5D2_CHAN_SINGLE(11, 0x7c), |
| AT91_SAMA5D2_CHAN_DIFF(0, 1, 0x50), |
| AT91_SAMA5D2_CHAN_DIFF(2, 3, 0x58), |
| AT91_SAMA5D2_CHAN_DIFF(4, 5, 0x60), |
| AT91_SAMA5D2_CHAN_DIFF(6, 7, 0x68), |
| AT91_SAMA5D2_CHAN_DIFF(8, 9, 0x70), |
| AT91_SAMA5D2_CHAN_DIFF(10, 11, 0x78), |
| IIO_CHAN_SOFT_TIMESTAMP(AT91_SAMA5D2_SINGLE_CHAN_CNT |
| + AT91_SAMA5D2_DIFF_CHAN_CNT + 1), |
| }; |
| |
| static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) |
| { |
| struct iio_dev *indio = iio_trigger_get_drvdata(trig); |
| struct at91_adc_state *st = iio_priv(indio); |
| u32 status = at91_adc_readl(st, AT91_SAMA5D2_TRGR); |
| u8 bit; |
| |
| /* clear TRGMOD */ |
| status &= ~AT91_SAMA5D2_TRGR_TRGMOD_MASK; |
| |
| if (state) |
| status |= st->selected_trig->trgmod_value; |
| |
| /* set/unset hw trigger */ |
| at91_adc_writel(st, AT91_SAMA5D2_TRGR, status); |
| |
| for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) { |
| struct iio_chan_spec const *chan = indio->channels + bit; |
| |
| if (state) { |
| at91_adc_writel(st, AT91_SAMA5D2_CHER, |
| BIT(chan->channel)); |
| at91_adc_writel(st, AT91_SAMA5D2_IER, |
| BIT(chan->channel)); |
| } else { |
| at91_adc_writel(st, AT91_SAMA5D2_IDR, |
| BIT(chan->channel)); |
| at91_adc_writel(st, AT91_SAMA5D2_CHDR, |
| BIT(chan->channel)); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int at91_adc_reenable_trigger(struct iio_trigger *trig) |
| { |
| struct iio_dev *indio = iio_trigger_get_drvdata(trig); |
| struct at91_adc_state *st = iio_priv(indio); |
| |
| enable_irq(st->irq); |
| |
| /* Needed to ACK the DRDY interruption */ |
| at91_adc_readl(st, AT91_SAMA5D2_LCDR); |
| return 0; |
| } |
| |
| static const struct iio_trigger_ops at91_adc_trigger_ops = { |
| .owner = THIS_MODULE, |
| .set_trigger_state = &at91_adc_configure_trigger, |
| .try_reenable = &at91_adc_reenable_trigger, |
| }; |
| |
| static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *indio, |
| char *trigger_name) |
| { |
| struct iio_trigger *trig; |
| int ret; |
| |
| trig = devm_iio_trigger_alloc(&indio->dev, "%s-dev%d-%s", indio->name, |
| indio->id, trigger_name); |
| if (!trig) |
| return NULL; |
| |
| trig->dev.parent = indio->dev.parent; |
| iio_trigger_set_drvdata(trig, indio); |
| trig->ops = &at91_adc_trigger_ops; |
| |
| ret = devm_iio_trigger_register(&indio->dev, trig); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| return trig; |
| } |
| |
| static int at91_adc_trigger_init(struct iio_dev *indio) |
| { |
| struct at91_adc_state *st = iio_priv(indio); |
| |
| st->trig = at91_adc_allocate_trigger(indio, st->selected_trig->name); |
| if (IS_ERR(st->trig)) { |
| dev_err(&indio->dev, |
| "could not allocate trigger\n"); |
| return PTR_ERR(st->trig); |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t at91_adc_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio = pf->indio_dev; |
| struct at91_adc_state *st = iio_priv(indio); |
| int i = 0; |
| u8 bit; |
| |
| for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) { |
| struct iio_chan_spec const *chan = indio->channels + bit; |
| |
| st->buffer[i] = at91_adc_readl(st, chan->address); |
| i++; |
| } |
| |
| iio_push_to_buffers_with_timestamp(indio, st->buffer, pf->timestamp); |
| |
| iio_trigger_notify_done(indio->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int at91_adc_buffer_init(struct iio_dev *indio) |
| { |
| return devm_iio_triggered_buffer_setup(&indio->dev, indio, |
| &iio_pollfunc_store_time, |
| &at91_adc_trigger_handler, NULL); |
| } |
| |
| static unsigned at91_adc_startup_time(unsigned startup_time_min, |
| unsigned adc_clk_khz) |
| { |
| static const unsigned int startup_lookup[] = { |
| 0, 8, 16, 24, |
| 64, 80, 96, 112, |
| 512, 576, 640, 704, |
| 768, 832, 896, 960 |
| }; |
| unsigned ticks_min, i; |
| |
| /* |
| * Since the adc frequency is checked before, there is no reason |
| * to not meet the startup time constraint. |
| */ |
| |
| ticks_min = startup_time_min * adc_clk_khz / 1000; |
| for (i = 0; i < ARRAY_SIZE(startup_lookup); i++) |
| if (startup_lookup[i] > ticks_min) |
| break; |
| |
| return i; |
| } |
| |
| static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq) |
| { |
| struct iio_dev *indio_dev = iio_priv_to_dev(st); |
| unsigned f_per, prescal, startup, mr; |
| |
| f_per = clk_get_rate(st->per_clk); |
| prescal = (f_per / (2 * freq)) - 1; |
| |
| startup = at91_adc_startup_time(st->soc_info.startup_time, |
| freq / 1000); |
| |
| mr = at91_adc_readl(st, AT91_SAMA5D2_MR); |
| mr &= ~(AT91_SAMA5D2_MR_STARTUP_MASK | AT91_SAMA5D2_MR_PRESCAL_MASK); |
| mr |= AT91_SAMA5D2_MR_STARTUP(startup); |
| mr |= AT91_SAMA5D2_MR_PRESCAL(prescal); |
| at91_adc_writel(st, AT91_SAMA5D2_MR, mr); |
| |
| dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n", |
| freq, startup, prescal); |
| } |
| |
| static unsigned at91_adc_get_sample_freq(struct at91_adc_state *st) |
| { |
| unsigned f_adc, f_per = clk_get_rate(st->per_clk); |
| unsigned mr, prescal; |
| |
| mr = at91_adc_readl(st, AT91_SAMA5D2_MR); |
| prescal = (mr >> AT91_SAMA5D2_MR_PRESCAL_OFFSET) |
| & AT91_SAMA5D2_MR_PRESCAL_MAX; |
| f_adc = f_per / (2 * (prescal + 1)); |
| |
| return f_adc; |
| } |
| |
| static irqreturn_t at91_adc_interrupt(int irq, void *private) |
| { |
| struct iio_dev *indio = private; |
| struct at91_adc_state *st = iio_priv(indio); |
| u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR); |
| u32 imr = at91_adc_readl(st, AT91_SAMA5D2_IMR); |
| |
| if (!(status & imr)) |
| return IRQ_NONE; |
| |
| if (iio_buffer_enabled(indio)) { |
| disable_irq_nosync(irq); |
| iio_trigger_poll(indio->trig); |
| } else { |
| st->conversion_value = at91_adc_readl(st, st->chan->address); |
| st->conversion_done = true; |
| wake_up_interruptible(&st->wq_data_available); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static int at91_adc_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct at91_adc_state *st = iio_priv(indio_dev); |
| u32 cor = 0; |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| /* we cannot use software trigger if hw trigger enabled */ |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&st->lock); |
| |
| st->chan = chan; |
| |
| if (chan->differential) |
| cor = (BIT(chan->channel) | BIT(chan->channel2)) << |
| AT91_SAMA5D2_COR_DIFF_OFFSET; |
| |
| at91_adc_writel(st, AT91_SAMA5D2_COR, cor); |
| at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel)); |
| at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel)); |
| at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START); |
| |
| ret = wait_event_interruptible_timeout(st->wq_data_available, |
| st->conversion_done, |
| msecs_to_jiffies(1000)); |
| if (ret == 0) |
| ret = -ETIMEDOUT; |
| |
| if (ret > 0) { |
| *val = st->conversion_value; |
| if (chan->scan_type.sign == 's') |
| *val = sign_extend32(*val, 11); |
| ret = IIO_VAL_INT; |
| st->conversion_done = false; |
| } |
| |
| at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel)); |
| at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel)); |
| |
| mutex_unlock(&st->lock); |
| |
| iio_device_release_direct_mode(indio_dev); |
| return ret; |
| |
| case IIO_CHAN_INFO_SCALE: |
| *val = st->vref_uv / 1000; |
| if (chan->differential) |
| *val *= 2; |
| *val2 = chan->scan_type.realbits; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *val = at91_adc_get_sample_freq(st); |
| return IIO_VAL_INT; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int at91_adc_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct at91_adc_state *st = iio_priv(indio_dev); |
| |
| if (mask != IIO_CHAN_INFO_SAMP_FREQ) |
| return -EINVAL; |
| |
| if (val < st->soc_info.min_sample_rate || |
| val > st->soc_info.max_sample_rate) |
| return -EINVAL; |
| |
| at91_adc_setup_samp_freq(st, val); |
| |
| return 0; |
| } |
| |
| static const struct iio_info at91_adc_info = { |
| .read_raw = &at91_adc_read_raw, |
| .write_raw = &at91_adc_write_raw, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| static void at91_adc_hw_init(struct at91_adc_state *st) |
| { |
| at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST); |
| at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff); |
| /* |
| * Transfer field must be set to 2 according to the datasheet and |
| * allows different analog settings for each channel. |
| */ |
| at91_adc_writel(st, AT91_SAMA5D2_MR, |
| AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH); |
| |
| at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate); |
| } |
| |
| static int at91_adc_probe(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev; |
| struct at91_adc_state *st; |
| struct resource *res; |
| int ret, i; |
| u32 edge_type; |
| |
| indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| indio_dev->dev.parent = &pdev->dev; |
| indio_dev->name = dev_name(&pdev->dev); |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->info = &at91_adc_info; |
| indio_dev->channels = at91_adc_channels; |
| indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels); |
| |
| st = iio_priv(indio_dev); |
| |
| ret = of_property_read_u32(pdev->dev.of_node, |
| "atmel,min-sample-rate-hz", |
| &st->soc_info.min_sample_rate); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "invalid or missing value for atmel,min-sample-rate-hz\n"); |
| return ret; |
| } |
| |
| ret = of_property_read_u32(pdev->dev.of_node, |
| "atmel,max-sample-rate-hz", |
| &st->soc_info.max_sample_rate); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "invalid or missing value for atmel,max-sample-rate-hz\n"); |
| return ret; |
| } |
| |
| ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms", |
| &st->soc_info.startup_time); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "invalid or missing value for atmel,startup-time-ms\n"); |
| return ret; |
| } |
| |
| ret = of_property_read_u32(pdev->dev.of_node, |
| "atmel,trigger-edge-type", &edge_type); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "invalid or missing value for atmel,trigger-edge-type\n"); |
| return ret; |
| } |
| |
| st->selected_trig = NULL; |
| |
| for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT; i++) |
| if (at91_adc_trigger_list[i].edge_type == edge_type) { |
| st->selected_trig = &at91_adc_trigger_list[i]; |
| break; |
| } |
| |
| if (!st->selected_trig) { |
| dev_err(&pdev->dev, "invalid external trigger edge value\n"); |
| return -EINVAL; |
| } |
| |
| init_waitqueue_head(&st->wq_data_available); |
| mutex_init(&st->lock); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -EINVAL; |
| |
| st->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(st->base)) |
| return PTR_ERR(st->base); |
| |
| st->irq = platform_get_irq(pdev, 0); |
| if (st->irq <= 0) { |
| if (!st->irq) |
| st->irq = -ENXIO; |
| |
| return st->irq; |
| } |
| |
| st->per_clk = devm_clk_get(&pdev->dev, "adc_clk"); |
| if (IS_ERR(st->per_clk)) |
| return PTR_ERR(st->per_clk); |
| |
| st->reg = devm_regulator_get(&pdev->dev, "vddana"); |
| if (IS_ERR(st->reg)) |
| return PTR_ERR(st->reg); |
| |
| st->vref = devm_regulator_get(&pdev->dev, "vref"); |
| if (IS_ERR(st->vref)) |
| return PTR_ERR(st->vref); |
| |
| ret = devm_request_irq(&pdev->dev, st->irq, at91_adc_interrupt, 0, |
| pdev->dev.driver->name, indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = regulator_enable(st->reg); |
| if (ret) |
| return ret; |
| |
| ret = regulator_enable(st->vref); |
| if (ret) |
| goto reg_disable; |
| |
| st->vref_uv = regulator_get_voltage(st->vref); |
| if (st->vref_uv <= 0) { |
| ret = -EINVAL; |
| goto vref_disable; |
| } |
| |
| at91_adc_hw_init(st); |
| |
| ret = clk_prepare_enable(st->per_clk); |
| if (ret) |
| goto vref_disable; |
| |
| platform_set_drvdata(pdev, indio_dev); |
| |
| ret = at91_adc_buffer_init(indio_dev); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "couldn't initialize the buffer.\n"); |
| goto per_clk_disable_unprepare; |
| } |
| |
| ret = at91_adc_trigger_init(indio_dev); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "couldn't setup the triggers.\n"); |
| goto per_clk_disable_unprepare; |
| } |
| |
| ret = iio_device_register(indio_dev); |
| if (ret < 0) |
| goto per_clk_disable_unprepare; |
| |
| dev_info(&pdev->dev, "setting up trigger as %s\n", |
| st->selected_trig->name); |
| |
| dev_info(&pdev->dev, "version: %x\n", |
| readl_relaxed(st->base + AT91_SAMA5D2_VERSION)); |
| |
| return 0; |
| |
| per_clk_disable_unprepare: |
| clk_disable_unprepare(st->per_clk); |
| vref_disable: |
| regulator_disable(st->vref); |
| reg_disable: |
| regulator_disable(st->reg); |
| return ret; |
| } |
| |
| static int at91_adc_remove(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| struct at91_adc_state *st = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| |
| clk_disable_unprepare(st->per_clk); |
| |
| regulator_disable(st->vref); |
| regulator_disable(st->reg); |
| |
| return 0; |
| } |
| |
| static __maybe_unused int at91_adc_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = |
| platform_get_drvdata(to_platform_device(dev)); |
| struct at91_adc_state *st = iio_priv(indio_dev); |
| |
| /* |
| * Do a sofware reset of the ADC before we go to suspend. |
| * this will ensure that all pins are free from being muxed by the ADC |
| * and can be used by for other devices. |
| * Otherwise, ADC will hog them and we can't go to suspend mode. |
| */ |
| at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST); |
| |
| clk_disable_unprepare(st->per_clk); |
| regulator_disable(st->vref); |
| regulator_disable(st->reg); |
| |
| return pinctrl_pm_select_sleep_state(dev); |
| } |
| |
| static __maybe_unused int at91_adc_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = |
| platform_get_drvdata(to_platform_device(dev)); |
| struct at91_adc_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| ret = pinctrl_pm_select_default_state(dev); |
| if (ret) |
| goto resume_failed; |
| |
| ret = regulator_enable(st->reg); |
| if (ret) |
| goto resume_failed; |
| |
| ret = regulator_enable(st->vref); |
| if (ret) |
| goto reg_disable_resume; |
| |
| ret = clk_prepare_enable(st->per_clk); |
| if (ret) |
| goto vref_disable_resume; |
| |
| at91_adc_hw_init(st); |
| |
| /* reconfiguring trigger hardware state */ |
| if (iio_buffer_enabled(indio_dev)) |
| at91_adc_configure_trigger(st->trig, true); |
| |
| return 0; |
| |
| vref_disable_resume: |
| regulator_disable(st->vref); |
| reg_disable_resume: |
| regulator_disable(st->reg); |
| resume_failed: |
| dev_err(&indio_dev->dev, "failed to resume\n"); |
| return ret; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume); |
| |
| static const struct of_device_id at91_adc_dt_match[] = { |
| { |
| .compatible = "atmel,sama5d2-adc", |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(of, at91_adc_dt_match); |
| |
| static struct platform_driver at91_adc_driver = { |
| .probe = at91_adc_probe, |
| .remove = at91_adc_remove, |
| .driver = { |
| .name = "at91-sama5d2_adc", |
| .of_match_table = at91_adc_dt_match, |
| .pm = &at91_adc_pm_ops, |
| }, |
| }; |
| module_platform_driver(at91_adc_driver) |
| |
| MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>"); |
| MODULE_DESCRIPTION("Atmel AT91 SAMA5D2 ADC"); |
| MODULE_LICENSE("GPL v2"); |