| /* |
| Copyright (C) 2004 - 2008 rt2x00 SourceForge Project |
| <http://rt2x00.serialmonkey.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the |
| Free Software Foundation, Inc., |
| 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* |
| Module: rt2x00 |
| Abstract: rt2x00 generic register information. |
| */ |
| |
| #ifndef RT2X00REG_H |
| #define RT2X00REG_H |
| |
| /* |
| * Antenna values |
| */ |
| enum antenna { |
| ANTENNA_SW_DIVERSITY = 0, |
| ANTENNA_A = 1, |
| ANTENNA_B = 2, |
| ANTENNA_HW_DIVERSITY = 3, |
| }; |
| |
| /* |
| * Led mode values. |
| */ |
| enum led_mode { |
| LED_MODE_DEFAULT = 0, |
| LED_MODE_TXRX_ACTIVITY = 1, |
| LED_MODE_SIGNAL_STRENGTH = 2, |
| LED_MODE_ASUS = 3, |
| LED_MODE_ALPHA = 4, |
| }; |
| |
| /* |
| * TSF sync values |
| */ |
| enum tsf_sync { |
| TSF_SYNC_NONE = 0, |
| TSF_SYNC_INFRA = 1, |
| TSF_SYNC_BEACON = 2, |
| }; |
| |
| /* |
| * Device states |
| */ |
| enum dev_state { |
| STATE_DEEP_SLEEP = 0, |
| STATE_SLEEP = 1, |
| STATE_STANDBY = 2, |
| STATE_AWAKE = 3, |
| |
| /* |
| * Additional device states, these values are |
| * not strict since they are not directly passed |
| * into the device. |
| */ |
| STATE_RADIO_ON, |
| STATE_RADIO_OFF, |
| STATE_RADIO_RX_ON, |
| STATE_RADIO_RX_OFF, |
| STATE_RADIO_RX_ON_LINK, |
| STATE_RADIO_RX_OFF_LINK, |
| STATE_RADIO_IRQ_ON, |
| STATE_RADIO_IRQ_OFF, |
| }; |
| |
| /* |
| * IFS backoff values |
| */ |
| enum ifs { |
| IFS_BACKOFF = 0, |
| IFS_SIFS = 1, |
| IFS_NEW_BACKOFF = 2, |
| IFS_NONE = 3, |
| }; |
| |
| /* |
| * Cipher types for hardware encryption |
| */ |
| enum cipher { |
| CIPHER_NONE = 0, |
| CIPHER_WEP64 = 1, |
| CIPHER_WEP128 = 2, |
| CIPHER_TKIP = 3, |
| CIPHER_AES = 4, |
| /* |
| * The following fields were added by rt61pci and rt73usb. |
| */ |
| CIPHER_CKIP64 = 5, |
| CIPHER_CKIP128 = 6, |
| CIPHER_TKIP_NO_MIC = 7, |
| }; |
| |
| /* |
| * Register handlers. |
| * We store the position of a register field inside a field structure, |
| * This will simplify the process of setting and reading a certain field |
| * inside the register while making sure the process remains byte order safe. |
| */ |
| struct rt2x00_field8 { |
| u8 bit_offset; |
| u8 bit_mask; |
| }; |
| |
| struct rt2x00_field16 { |
| u16 bit_offset; |
| u16 bit_mask; |
| }; |
| |
| struct rt2x00_field32 { |
| u32 bit_offset; |
| u32 bit_mask; |
| }; |
| |
| /* |
| * Power of two check, this will check |
| * if the mask that has been given contains |
| * and contiguous set of bits. |
| */ |
| #define is_power_of_two(x) ( !((x) & ((x)-1)) ) |
| #define low_bit_mask(x) ( ((x)-1) & ~(x) ) |
| #define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x)) |
| |
| #define FIELD8(__mask) \ |
| ({ \ |
| BUILD_BUG_ON(!(__mask) || \ |
| !is_valid_mask(__mask) || \ |
| (__mask) != (u8)(__mask)); \ |
| (struct rt2x00_field8) { \ |
| __ffs(__mask), (__mask) \ |
| }; \ |
| }) |
| |
| #define FIELD16(__mask) \ |
| ({ \ |
| BUILD_BUG_ON(!(__mask) || \ |
| !is_valid_mask(__mask) || \ |
| (__mask) != (u16)(__mask));\ |
| (struct rt2x00_field16) { \ |
| __ffs(__mask), (__mask) \ |
| }; \ |
| }) |
| |
| #define FIELD32(__mask) \ |
| ({ \ |
| BUILD_BUG_ON(!(__mask) || \ |
| !is_valid_mask(__mask) || \ |
| (__mask) != (u32)(__mask));\ |
| (struct rt2x00_field32) { \ |
| __ffs(__mask), (__mask) \ |
| }; \ |
| }) |
| |
| static inline void rt2x00_set_field32(u32 *reg, |
| const struct rt2x00_field32 field, |
| const u32 value) |
| { |
| *reg &= ~(field.bit_mask); |
| *reg |= (value << field.bit_offset) & field.bit_mask; |
| } |
| |
| static inline u32 rt2x00_get_field32(const u32 reg, |
| const struct rt2x00_field32 field) |
| { |
| return (reg & field.bit_mask) >> field.bit_offset; |
| } |
| |
| static inline void rt2x00_set_field16(u16 *reg, |
| const struct rt2x00_field16 field, |
| const u16 value) |
| { |
| *reg &= ~(field.bit_mask); |
| *reg |= (value << field.bit_offset) & field.bit_mask; |
| } |
| |
| static inline u16 rt2x00_get_field16(const u16 reg, |
| const struct rt2x00_field16 field) |
| { |
| return (reg & field.bit_mask) >> field.bit_offset; |
| } |
| |
| static inline void rt2x00_set_field8(u8 *reg, |
| const struct rt2x00_field8 field, |
| const u8 value) |
| { |
| *reg &= ~(field.bit_mask); |
| *reg |= (value << field.bit_offset) & field.bit_mask; |
| } |
| |
| static inline u8 rt2x00_get_field8(const u8 reg, |
| const struct rt2x00_field8 field) |
| { |
| return (reg & field.bit_mask) >> field.bit_offset; |
| } |
| |
| #endif /* RT2X00REG_H */ |