| /* |
| * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> |
| * Copyright 2008 Juergen Beisert, kernel@pengutronix.de |
| * |
| * Based on code from Freescale, |
| * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301, USA. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/gpio/driver.h> |
| /* FIXME: for gpio_get_value(), replace this by direct register read */ |
| #include <linux/gpio.h> |
| #include <linux/module.h> |
| |
| #define MXS_SET 0x4 |
| #define MXS_CLR 0x8 |
| |
| #define PINCTRL_DOUT(p) ((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10) |
| #define PINCTRL_DIN(p) ((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10) |
| #define PINCTRL_DOE(p) ((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10) |
| #define PINCTRL_PIN2IRQ(p) ((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10) |
| #define PINCTRL_IRQEN(p) ((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10) |
| #define PINCTRL_IRQLEV(p) ((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10) |
| #define PINCTRL_IRQPOL(p) ((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10) |
| #define PINCTRL_IRQSTAT(p) ((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10) |
| |
| #define GPIO_INT_FALL_EDGE 0x0 |
| #define GPIO_INT_LOW_LEV 0x1 |
| #define GPIO_INT_RISE_EDGE 0x2 |
| #define GPIO_INT_HIGH_LEV 0x3 |
| #define GPIO_INT_LEV_MASK (1 << 0) |
| #define GPIO_INT_POL_MASK (1 << 1) |
| |
| enum mxs_gpio_id { |
| IMX23_GPIO, |
| IMX28_GPIO, |
| }; |
| |
| struct mxs_gpio_port { |
| void __iomem *base; |
| int id; |
| int irq; |
| struct irq_domain *domain; |
| struct gpio_chip gc; |
| enum mxs_gpio_id devid; |
| u32 both_edges; |
| }; |
| |
| static inline int is_imx23_gpio(struct mxs_gpio_port *port) |
| { |
| return port->devid == IMX23_GPIO; |
| } |
| |
| static inline int is_imx28_gpio(struct mxs_gpio_port *port) |
| { |
| return port->devid == IMX28_GPIO; |
| } |
| |
| /* Note: This driver assumes 32 GPIOs are handled in one register */ |
| |
| static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) |
| { |
| u32 val; |
| u32 pin_mask = 1 << d->hwirq; |
| struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); |
| struct irq_chip_type *ct = irq_data_get_chip_type(d); |
| struct mxs_gpio_port *port = gc->private; |
| void __iomem *pin_addr; |
| int edge; |
| |
| if (!(ct->type & type)) |
| if (irq_setup_alt_chip(d, type)) |
| return -EINVAL; |
| |
| port->both_edges &= ~pin_mask; |
| switch (type) { |
| case IRQ_TYPE_EDGE_BOTH: |
| val = gpio_get_value(port->gc.base + d->hwirq); |
| if (val) |
| edge = GPIO_INT_FALL_EDGE; |
| else |
| edge = GPIO_INT_RISE_EDGE; |
| port->both_edges |= pin_mask; |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| edge = GPIO_INT_RISE_EDGE; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| edge = GPIO_INT_FALL_EDGE; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| edge = GPIO_INT_LOW_LEV; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| edge = GPIO_INT_HIGH_LEV; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* set level or edge */ |
| pin_addr = port->base + PINCTRL_IRQLEV(port); |
| if (edge & GPIO_INT_LEV_MASK) { |
| writel(pin_mask, pin_addr + MXS_SET); |
| writel(pin_mask, port->base + PINCTRL_IRQEN(port) + MXS_SET); |
| } else { |
| writel(pin_mask, pin_addr + MXS_CLR); |
| writel(pin_mask, port->base + PINCTRL_PIN2IRQ(port) + MXS_SET); |
| } |
| |
| /* set polarity */ |
| pin_addr = port->base + PINCTRL_IRQPOL(port); |
| if (edge & GPIO_INT_POL_MASK) |
| writel(pin_mask, pin_addr + MXS_SET); |
| else |
| writel(pin_mask, pin_addr + MXS_CLR); |
| |
| writel(pin_mask, |
| port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); |
| |
| return 0; |
| } |
| |
| static void mxs_flip_edge(struct mxs_gpio_port *port, u32 gpio) |
| { |
| u32 bit, val, edge; |
| void __iomem *pin_addr; |
| |
| bit = 1 << gpio; |
| |
| pin_addr = port->base + PINCTRL_IRQPOL(port); |
| val = readl(pin_addr); |
| edge = val & bit; |
| |
| if (edge) |
| writel(bit, pin_addr + MXS_CLR); |
| else |
| writel(bit, pin_addr + MXS_SET); |
| } |
| |
| /* MXS has one interrupt *per* gpio port */ |
| static void mxs_gpio_irq_handler(struct irq_desc *desc) |
| { |
| u32 irq_stat; |
| struct mxs_gpio_port *port = irq_desc_get_handler_data(desc); |
| |
| desc->irq_data.chip->irq_ack(&desc->irq_data); |
| |
| irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) & |
| readl(port->base + PINCTRL_IRQEN(port)); |
| |
| while (irq_stat != 0) { |
| int irqoffset = fls(irq_stat) - 1; |
| if (port->both_edges & (1 << irqoffset)) |
| mxs_flip_edge(port, irqoffset); |
| |
| generic_handle_irq(irq_find_mapping(port->domain, irqoffset)); |
| irq_stat &= ~(1 << irqoffset); |
| } |
| } |
| |
| /* |
| * Set interrupt number "irq" in the GPIO as a wake-up source. |
| * While system is running, all registered GPIO interrupts need to have |
| * wake-up enabled. When system is suspended, only selected GPIO interrupts |
| * need to have wake-up enabled. |
| * @param irq interrupt source number |
| * @param enable enable as wake-up if equal to non-zero |
| * @return This function returns 0 on success. |
| */ |
| static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) |
| { |
| struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); |
| struct mxs_gpio_port *port = gc->private; |
| |
| if (enable) |
| enable_irq_wake(port->irq); |
| else |
| disable_irq_wake(port->irq); |
| |
| return 0; |
| } |
| |
| static int mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base) |
| { |
| struct irq_chip_generic *gc; |
| struct irq_chip_type *ct; |
| |
| gc = irq_alloc_generic_chip("gpio-mxs", 2, irq_base, |
| port->base, handle_level_irq); |
| if (!gc) |
| return -ENOMEM; |
| |
| gc->private = port; |
| |
| ct = &gc->chip_types[0]; |
| ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; |
| ct->chip.irq_ack = irq_gc_ack_set_bit; |
| ct->chip.irq_mask = irq_gc_mask_disable_reg; |
| ct->chip.irq_unmask = irq_gc_unmask_enable_reg; |
| ct->chip.irq_set_type = mxs_gpio_set_irq_type; |
| ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; |
| ct->chip.flags = IRQCHIP_SET_TYPE_MASKED; |
| ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; |
| ct->regs.enable = PINCTRL_PIN2IRQ(port) + MXS_SET; |
| ct->regs.disable = PINCTRL_PIN2IRQ(port) + MXS_CLR; |
| |
| ct = &gc->chip_types[1]; |
| ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; |
| ct->chip.irq_ack = irq_gc_ack_set_bit; |
| ct->chip.irq_mask = irq_gc_mask_disable_reg; |
| ct->chip.irq_unmask = irq_gc_unmask_enable_reg; |
| ct->chip.irq_set_type = mxs_gpio_set_irq_type; |
| ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; |
| ct->chip.flags = IRQCHIP_SET_TYPE_MASKED; |
| ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; |
| ct->regs.enable = PINCTRL_IRQEN(port) + MXS_SET; |
| ct->regs.disable = PINCTRL_IRQEN(port) + MXS_CLR; |
| ct->handler = handle_level_irq; |
| |
| irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK, |
| IRQ_NOREQUEST, 0); |
| |
| return 0; |
| } |
| |
| static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset) |
| { |
| struct mxs_gpio_port *port = gpiochip_get_data(gc); |
| |
| return irq_find_mapping(port->domain, offset); |
| } |
| |
| static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned offset) |
| { |
| struct mxs_gpio_port *port = gpiochip_get_data(gc); |
| u32 mask = 1 << offset; |
| u32 dir; |
| |
| dir = readl(port->base + PINCTRL_DOE(port)); |
| return !(dir & mask); |
| } |
| |
| static const struct platform_device_id mxs_gpio_ids[] = { |
| { |
| .name = "imx23-gpio", |
| .driver_data = IMX23_GPIO, |
| }, { |
| .name = "imx28-gpio", |
| .driver_data = IMX28_GPIO, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(platform, mxs_gpio_ids); |
| |
| static const struct of_device_id mxs_gpio_dt_ids[] = { |
| { .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, }, |
| { .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids); |
| |
| static int mxs_gpio_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *of_id = |
| of_match_device(mxs_gpio_dt_ids, &pdev->dev); |
| struct device_node *np = pdev->dev.of_node; |
| struct device_node *parent; |
| static void __iomem *base; |
| struct mxs_gpio_port *port; |
| int irq_base; |
| int err; |
| |
| port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); |
| if (!port) |
| return -ENOMEM; |
| |
| port->id = of_alias_get_id(np, "gpio"); |
| if (port->id < 0) |
| return port->id; |
| port->devid = (enum mxs_gpio_id) of_id->data; |
| port->irq = platform_get_irq(pdev, 0); |
| if (port->irq < 0) |
| return port->irq; |
| |
| /* |
| * map memory region only once, as all the gpio ports |
| * share the same one |
| */ |
| if (!base) { |
| parent = of_get_parent(np); |
| base = of_iomap(parent, 0); |
| of_node_put(parent); |
| if (!base) |
| return -EADDRNOTAVAIL; |
| } |
| port->base = base; |
| |
| /* initially disable the interrupts */ |
| writel(0, port->base + PINCTRL_PIN2IRQ(port)); |
| writel(0, port->base + PINCTRL_IRQEN(port)); |
| |
| /* clear address has to be used to clear IRQSTAT bits */ |
| writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); |
| |
| irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id()); |
| if (irq_base < 0) { |
| err = irq_base; |
| goto out_iounmap; |
| } |
| |
| port->domain = irq_domain_add_legacy(np, 32, irq_base, 0, |
| &irq_domain_simple_ops, NULL); |
| if (!port->domain) { |
| err = -ENODEV; |
| goto out_irqdesc_free; |
| } |
| |
| /* gpio-mxs can be a generic irq chip */ |
| err = mxs_gpio_init_gc(port, irq_base); |
| if (err < 0) |
| goto out_irqdomain_remove; |
| |
| /* setup one handler for each entry */ |
| irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler, |
| port); |
| |
| err = bgpio_init(&port->gc, &pdev->dev, 4, |
| port->base + PINCTRL_DIN(port), |
| port->base + PINCTRL_DOUT(port) + MXS_SET, |
| port->base + PINCTRL_DOUT(port) + MXS_CLR, |
| port->base + PINCTRL_DOE(port), NULL, 0); |
| if (err) |
| goto out_irqdomain_remove; |
| |
| port->gc.to_irq = mxs_gpio_to_irq; |
| port->gc.get_direction = mxs_gpio_get_direction; |
| port->gc.base = port->id * 32; |
| |
| err = gpiochip_add_data(&port->gc, port); |
| if (err) |
| goto out_irqdomain_remove; |
| |
| return 0; |
| |
| out_irqdomain_remove: |
| irq_domain_remove(port->domain); |
| out_irqdesc_free: |
| irq_free_descs(irq_base, 32); |
| out_iounmap: |
| iounmap(port->base); |
| return err; |
| } |
| |
| static struct platform_driver mxs_gpio_driver = { |
| .driver = { |
| .name = "gpio-mxs", |
| .of_match_table = mxs_gpio_dt_ids, |
| }, |
| .probe = mxs_gpio_probe, |
| .id_table = mxs_gpio_ids, |
| }; |
| |
| static int __init mxs_gpio_init(void) |
| { |
| return platform_driver_register(&mxs_gpio_driver); |
| } |
| postcore_initcall(mxs_gpio_init); |
| |
| MODULE_AUTHOR("Freescale Semiconductor, " |
| "Daniel Mack <danielncaiaq.de>, " |
| "Juergen Beisert <kernel@pengutronix.de>"); |
| MODULE_DESCRIPTION("Freescale MXS GPIO"); |
| MODULE_LICENSE("GPL"); |