blob: c8a48cbc2b7da2fee256632e1978d28fb2454f22 [file] [log] [blame]
/*
* Copyright © 2016-2017 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#include <linux/types.h>
#include "intel_huc.h"
#include "i915_drv.h"
/**
* DOC: HuC Firmware
*
* Motivation:
* GEN9 introduces a new dedicated firmware for usage in media HEVC (High
* Efficiency Video Coding) operations. Userspace can use the firmware
* capabilities by adding HuC specific commands to batch buffers.
*
* Implementation:
* The same firmware loader is used as the GuC. However, the actual
* loading to HW is deferred until GEM initialization is done.
*
* Note that HuC firmware loading must be done before GuC loading.
*/
#define BXT_HUC_FW_MAJOR 01
#define BXT_HUC_FW_MINOR 07
#define BXT_BLD_NUM 1398
#define SKL_HUC_FW_MAJOR 01
#define SKL_HUC_FW_MINOR 07
#define SKL_BLD_NUM 1398
#define KBL_HUC_FW_MAJOR 02
#define KBL_HUC_FW_MINOR 00
#define KBL_BLD_NUM 1810
#define GLK_HUC_FW_MAJOR 02
#define GLK_HUC_FW_MINOR 00
#define GLK_BLD_NUM 1748
#define HUC_FW_PATH(platform, major, minor, bld_num) \
"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
__stringify(minor) "_" __stringify(bld_num) ".bin"
#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_HUC_FW_MAJOR, \
SKL_HUC_FW_MINOR, SKL_BLD_NUM)
MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
#define I915_BXT_HUC_UCODE HUC_FW_PATH(bxt, BXT_HUC_FW_MAJOR, \
BXT_HUC_FW_MINOR, BXT_BLD_NUM)
MODULE_FIRMWARE(I915_BXT_HUC_UCODE);
#define I915_KBL_HUC_UCODE HUC_FW_PATH(kbl, KBL_HUC_FW_MAJOR, \
KBL_HUC_FW_MINOR, KBL_BLD_NUM)
MODULE_FIRMWARE(I915_KBL_HUC_UCODE);
#define I915_GLK_HUC_UCODE HUC_FW_PATH(glk, GLK_HUC_FW_MAJOR, \
GLK_HUC_FW_MINOR, GLK_BLD_NUM)
/**
* intel_huc_select_fw() - selects HuC firmware for loading
* @huc: intel_huc struct
*/
void intel_huc_select_fw(struct intel_huc *huc)
{
struct drm_i915_private *dev_priv = huc_to_i915(huc);
intel_uc_fw_init(&huc->fw, INTEL_UC_FW_TYPE_HUC);
if (i915_modparams.huc_firmware_path) {
huc->fw.path = i915_modparams.huc_firmware_path;
huc->fw.major_ver_wanted = 0;
huc->fw.minor_ver_wanted = 0;
} else if (IS_SKYLAKE(dev_priv)) {
huc->fw.path = I915_SKL_HUC_UCODE;
huc->fw.major_ver_wanted = SKL_HUC_FW_MAJOR;
huc->fw.minor_ver_wanted = SKL_HUC_FW_MINOR;
} else if (IS_BROXTON(dev_priv)) {
huc->fw.path = I915_BXT_HUC_UCODE;
huc->fw.major_ver_wanted = BXT_HUC_FW_MAJOR;
huc->fw.minor_ver_wanted = BXT_HUC_FW_MINOR;
} else if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) {
huc->fw.path = I915_KBL_HUC_UCODE;
huc->fw.major_ver_wanted = KBL_HUC_FW_MAJOR;
huc->fw.minor_ver_wanted = KBL_HUC_FW_MINOR;
} else if (IS_GEMINILAKE(dev_priv)) {
huc->fw.path = I915_GLK_HUC_UCODE;
huc->fw.major_ver_wanted = GLK_HUC_FW_MAJOR;
huc->fw.minor_ver_wanted = GLK_HUC_FW_MINOR;
} else {
DRM_ERROR("No HuC firmware known for platform with HuC!\n");
return;
}
}
/**
* huc_ucode_xfer() - DMA's the firmware
* @dev_priv: the drm_i915_private device
*
* Transfer the firmware image to RAM for execution by the microcontroller.
*
* Return: 0 on success, non-zero on failure
*/
static int huc_ucode_xfer(struct intel_uc_fw *huc_fw, struct i915_vma *vma)
{
struct intel_huc *huc = container_of(huc_fw, struct intel_huc, fw);
struct drm_i915_private *dev_priv = huc_to_i915(huc);
unsigned long offset = 0;
u32 size;
int ret;
GEM_BUG_ON(huc_fw->type != INTEL_UC_FW_TYPE_HUC);
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* Set the source address for the uCode */
offset = guc_ggtt_offset(vma) + huc_fw->header_offset;
I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
/* Hardware doesn't look at destination address for HuC. Set it to 0,
* but still program the correct address space.
*/
I915_WRITE(DMA_ADDR_1_LOW, 0);
I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
size = huc_fw->header_size + huc_fw->ucode_size;
I915_WRITE(DMA_COPY_SIZE, size);
/* Start the DMA */
I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
/* Wait for DMA to finish */
ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
/* Disable the bits once DMA is over */
I915_WRITE(DMA_CTRL, _MASKED_BIT_DISABLE(HUC_UKERNEL));
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
return ret;
}
/**
* intel_huc_init_hw() - load HuC uCode to device
* @huc: intel_huc structure
*
* Called from guc_setup() during driver loading and also after a GPU reset.
* Be note that HuC loading must be done before GuC loading.
*
* The firmware image should have already been fetched into memory by the
* earlier call to intel_huc_init(), so here we need only check that
* is succeeded, and then transfer the image to the h/w.
*
*/
void intel_huc_init_hw(struct intel_huc *huc)
{
intel_uc_fw_upload(&huc->fw, huc_ucode_xfer);
}
/**
* intel_huc_auth() - Authenticate HuC uCode
* @huc: intel_huc structure
*
* Called after HuC and GuC firmware loading during intel_uc_init_hw().
*
* This function pins HuC firmware image object into GGTT.
* Then it invokes GuC action to authenticate passing the offset to RSA
* signature through intel_guc_auth_huc(). It then waits for 50ms for
* firmware verification ACK and unpins the object.
*/
void intel_huc_auth(struct intel_huc *huc)
{
struct drm_i915_private *i915 = huc_to_i915(huc);
struct intel_guc *guc = &i915->guc;
struct i915_vma *vma;
int ret;
if (huc->fw.load_status != INTEL_UC_FIRMWARE_SUCCESS)
return;
vma = i915_gem_object_ggtt_pin(huc->fw.obj, NULL, 0, 0,
PIN_OFFSET_BIAS | GUC_WOPCM_TOP);
if (IS_ERR(vma)) {
DRM_ERROR("failed to pin huc fw object %d\n",
(int)PTR_ERR(vma));
return;
}
ret = intel_guc_auth_huc(guc,
guc_ggtt_offset(vma) + huc->fw.rsa_offset);
if (ret) {
DRM_ERROR("HuC: GuC did not ack Auth request %d\n", ret);
goto out;
}
/* Check authentication status, it should be done by now */
ret = intel_wait_for_register(i915,
HUC_STATUS2,
HUC_FW_VERIFIED,
HUC_FW_VERIFIED,
50);
if (ret) {
DRM_ERROR("HuC: Authentication failed %d\n", ret);
goto out;
}
out:
i915_vma_unpin(vma);
}