| /****************************************************************************** |
| * |
| * Copyright(c) 2009-2010 Realtek Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * wlanfae <wlanfae@realtek.com> |
| * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, |
| * Hsinchu 300, Taiwan. |
| * |
| * Larry Finger <Larry.Finger@lwfinger.net> |
| * |
| *****************************************************************************/ |
| |
| #include "../wifi.h" |
| #include "../pci.h" |
| #include "../ps.h" |
| #include "reg.h" |
| #include "def.h" |
| #include "phy.h" |
| #include "rf.h" |
| #include "dm.h" |
| #include "fw.h" |
| #include "hw.h" |
| #include "table.h" |
| |
| static u32 _rtl92s_phy_calculate_bit_shift(u32 bitmask) |
| { |
| u32 i; |
| |
| for (i = 0; i <= 31; i++) { |
| if (((bitmask >> i) & 0x1) == 1) |
| break; |
| } |
| |
| return i; |
| } |
| |
| u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u32 returnvalue = 0, originalvalue, bitshift; |
| |
| RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)\n", |
| regaddr, bitmask)); |
| |
| originalvalue = rtl_read_dword(rtlpriv, regaddr); |
| bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); |
| returnvalue = (originalvalue & bitmask) >> bitshift; |
| |
| RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, |
| ("BBR MASK=0x%x Addr[0x%x]=0x%x\n", |
| bitmask, regaddr, originalvalue)); |
| |
| return returnvalue; |
| |
| } |
| |
| void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask, |
| u32 data) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u32 originalvalue, bitshift; |
| |
| RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)," |
| " data(%#x)\n", regaddr, bitmask, data)); |
| |
| if (bitmask != MASKDWORD) { |
| originalvalue = rtl_read_dword(rtlpriv, regaddr); |
| bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); |
| data = ((originalvalue & (~bitmask)) | (data << bitshift)); |
| } |
| |
| rtl_write_dword(rtlpriv, regaddr, data); |
| |
| RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)," |
| " data(%#x)\n", regaddr, bitmask, data)); |
| |
| } |
| |
| static u32 _rtl92s_phy_rf_serial_read(struct ieee80211_hw *hw, |
| enum radio_path rfpath, u32 offset) |
| { |
| |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath]; |
| u32 newoffset; |
| u32 tmplong, tmplong2; |
| u8 rfpi_enable = 0; |
| u32 retvalue = 0; |
| |
| offset &= 0x3f; |
| newoffset = offset; |
| |
| tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD); |
| |
| if (rfpath == RF90_PATH_A) |
| tmplong2 = tmplong; |
| else |
| tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD); |
| |
| tmplong2 = (tmplong2 & (~BLSSI_READADDRESS)) | (newoffset << 23) | |
| BLSSI_READEDGE; |
| |
| rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD, |
| tmplong & (~BLSSI_READEDGE)); |
| |
| mdelay(1); |
| |
| rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2); |
| mdelay(1); |
| |
| rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD, tmplong | |
| BLSSI_READEDGE); |
| mdelay(1); |
| |
| if (rfpath == RF90_PATH_A) |
| rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER1, |
| BIT(8)); |
| else if (rfpath == RF90_PATH_B) |
| rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XB_HSSIPARAMETER1, |
| BIT(8)); |
| |
| if (rfpi_enable) |
| retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readbackpi, |
| BLSSI_READBACK_DATA); |
| else |
| retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback, |
| BLSSI_READBACK_DATA); |
| |
| retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback, |
| BLSSI_READBACK_DATA); |
| |
| RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFR-%d Addr[0x%x]=0x%x\n", |
| rfpath, pphyreg->rflssi_readback, retvalue)); |
| |
| return retvalue; |
| |
| } |
| |
| static void _rtl92s_phy_rf_serial_write(struct ieee80211_hw *hw, |
| enum radio_path rfpath, u32 offset, |
| u32 data) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath]; |
| u32 data_and_addr = 0; |
| u32 newoffset; |
| |
| offset &= 0x3f; |
| newoffset = offset; |
| |
| data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff; |
| rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr); |
| |
| RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFW-%d Addr[0x%x]=0x%x\n", |
| rfpath, pphyreg->rf3wire_offset, data_and_addr)); |
| } |
| |
| |
| u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, |
| u32 regaddr, u32 bitmask) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u32 original_value, readback_value, bitshift; |
| unsigned long flags; |
| |
| RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), " |
| "bitmask(%#x)\n", regaddr, rfpath, bitmask)); |
| |
| spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags); |
| |
| original_value = _rtl92s_phy_rf_serial_read(hw, rfpath, regaddr); |
| |
| bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); |
| readback_value = (original_value & bitmask) >> bitshift; |
| |
| spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags); |
| |
| RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), " |
| "bitmask(%#x), original_value(%#x)\n", regaddr, rfpath, |
| bitmask, original_value)); |
| |
| return readback_value; |
| } |
| |
| void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, |
| u32 regaddr, u32 bitmask, u32 data) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| u32 original_value, bitshift; |
| unsigned long flags; |
| |
| if (!((rtlphy->rf_pathmap >> rfpath) & 0x1)) |
| return; |
| |
| RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)," |
| " data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath)); |
| |
| spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags); |
| |
| if (bitmask != RFREG_OFFSET_MASK) { |
| original_value = _rtl92s_phy_rf_serial_read(hw, rfpath, |
| regaddr); |
| bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); |
| data = ((original_value & (~bitmask)) | (data << bitshift)); |
| } |
| |
| _rtl92s_phy_rf_serial_write(hw, rfpath, regaddr, data); |
| |
| spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags); |
| |
| RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x), " |
| "data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath)); |
| |
| } |
| |
| void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw, |
| u8 operation) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| |
| if (!is_hal_stop(rtlhal)) { |
| switch (operation) { |
| case SCAN_OPT_BACKUP: |
| rtl92s_phy_set_fw_cmd(hw, FW_CMD_PAUSE_DM_BY_SCAN); |
| break; |
| case SCAN_OPT_RESTORE: |
| rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| ("Unknown operation.\n")); |
| break; |
| } |
| } |
| } |
| |
| void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw, |
| enum nl80211_channel_type ch_type) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| u8 reg_bw_opmode; |
| u8 reg_prsr_rsc; |
| |
| RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("Switch to %s bandwidth\n", |
| rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ? |
| "20MHz" : "40MHz")); |
| |
| if (rtlphy->set_bwmode_inprogress) |
| return; |
| if (is_hal_stop(rtlhal)) |
| return; |
| |
| rtlphy->set_bwmode_inprogress = true; |
| |
| reg_bw_opmode = rtl_read_byte(rtlpriv, BW_OPMODE); |
| reg_prsr_rsc = rtl_read_byte(rtlpriv, RRSR + 2); |
| |
| switch (rtlphy->current_chan_bw) { |
| case HT_CHANNEL_WIDTH_20: |
| reg_bw_opmode |= BW_OPMODE_20MHZ; |
| rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode); |
| break; |
| case HT_CHANNEL_WIDTH_20_40: |
| reg_bw_opmode &= ~BW_OPMODE_20MHZ; |
| rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| ("unknown bandwidth: %#X\n", |
| rtlphy->current_chan_bw)); |
| break; |
| } |
| |
| switch (rtlphy->current_chan_bw) { |
| case HT_CHANNEL_WIDTH_20: |
| rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0); |
| rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0); |
| |
| if (rtlhal->version >= VERSION_8192S_BCUT) |
| rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x58); |
| break; |
| case HT_CHANNEL_WIDTH_20_40: |
| rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1); |
| rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1); |
| |
| rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND, |
| (mac->cur_40_prime_sc >> 1)); |
| rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc); |
| |
| if (rtlhal->version >= VERSION_8192S_BCUT) |
| rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw)); |
| break; |
| } |
| |
| rtl92s_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw); |
| rtlphy->set_bwmode_inprogress = false; |
| RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n")); |
| } |
| |
| static bool _rtl92s_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable, |
| u32 cmdtableidx, u32 cmdtablesz, enum swchnlcmd_id cmdid, |
| u32 para1, u32 para2, u32 msdelay) |
| { |
| struct swchnlcmd *pcmd; |
| |
| if (cmdtable == NULL) { |
| RT_ASSERT(false, ("cmdtable cannot be NULL.\n")); |
| return false; |
| } |
| |
| if (cmdtableidx >= cmdtablesz) |
| return false; |
| |
| pcmd = cmdtable + cmdtableidx; |
| pcmd->cmdid = cmdid; |
| pcmd->para1 = para1; |
| pcmd->para2 = para2; |
| pcmd->msdelay = msdelay; |
| |
| return true; |
| } |
| |
| static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw, |
| u8 channel, u8 *stage, u8 *step, u32 *delay) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct swchnlcmd precommoncmd[MAX_PRECMD_CNT]; |
| u32 precommoncmdcnt; |
| struct swchnlcmd postcommoncmd[MAX_POSTCMD_CNT]; |
| u32 postcommoncmdcnt; |
| struct swchnlcmd rfdependcmd[MAX_RFDEPENDCMD_CNT]; |
| u32 rfdependcmdcnt; |
| struct swchnlcmd *currentcmd = NULL; |
| u8 rfpath; |
| u8 num_total_rfpath = rtlphy->num_total_rfpath; |
| |
| precommoncmdcnt = 0; |
| _rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++, |
| MAX_PRECMD_CNT, CMDID_SET_TXPOWEROWER_LEVEL, 0, 0, 0); |
| _rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++, |
| MAX_PRECMD_CNT, CMDID_END, 0, 0, 0); |
| |
| postcommoncmdcnt = 0; |
| |
| _rtl92s_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++, |
| MAX_POSTCMD_CNT, CMDID_END, 0, 0, 0); |
| |
| rfdependcmdcnt = 0; |
| |
| RT_ASSERT((channel >= 1 && channel <= 14), |
| ("illegal channel for Zebra: %d\n", channel)); |
| |
| _rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++, |
| MAX_RFDEPENDCMD_CNT, CMDID_RF_WRITEREG, |
| RF_CHNLBW, channel, 10); |
| |
| _rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++, |
| MAX_RFDEPENDCMD_CNT, CMDID_END, 0, 0, 0); |
| |
| do { |
| switch (*stage) { |
| case 0: |
| currentcmd = &precommoncmd[*step]; |
| break; |
| case 1: |
| currentcmd = &rfdependcmd[*step]; |
| break; |
| case 2: |
| currentcmd = &postcommoncmd[*step]; |
| break; |
| } |
| |
| if (currentcmd->cmdid == CMDID_END) { |
| if ((*stage) == 2) { |
| return true; |
| } else { |
| (*stage)++; |
| (*step) = 0; |
| continue; |
| } |
| } |
| |
| switch (currentcmd->cmdid) { |
| case CMDID_SET_TXPOWEROWER_LEVEL: |
| rtl92s_phy_set_txpower(hw, channel); |
| break; |
| case CMDID_WRITEPORT_ULONG: |
| rtl_write_dword(rtlpriv, currentcmd->para1, |
| currentcmd->para2); |
| break; |
| case CMDID_WRITEPORT_USHORT: |
| rtl_write_word(rtlpriv, currentcmd->para1, |
| (u16)currentcmd->para2); |
| break; |
| case CMDID_WRITEPORT_UCHAR: |
| rtl_write_byte(rtlpriv, currentcmd->para1, |
| (u8)currentcmd->para2); |
| break; |
| case CMDID_RF_WRITEREG: |
| for (rfpath = 0; rfpath < num_total_rfpath; rfpath++) { |
| rtlphy->rfreg_chnlval[rfpath] = |
| ((rtlphy->rfreg_chnlval[rfpath] & |
| 0xfffffc00) | currentcmd->para2); |
| rtl_set_rfreg(hw, (enum radio_path)rfpath, |
| currentcmd->para1, |
| RFREG_OFFSET_MASK, |
| rtlphy->rfreg_chnlval[rfpath]); |
| } |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| ("switch case not process\n")); |
| break; |
| } |
| |
| break; |
| } while (true); |
| |
| (*delay) = currentcmd->msdelay; |
| (*step)++; |
| return false; |
| } |
| |
| u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| u32 delay; |
| bool ret; |
| |
| RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, |
| ("switch to channel%d\n", |
| rtlphy->current_channel)); |
| |
| if (rtlphy->sw_chnl_inprogress) |
| return 0; |
| |
| if (rtlphy->set_bwmode_inprogress) |
| return 0; |
| |
| if (is_hal_stop(rtlhal)) |
| return 0; |
| |
| rtlphy->sw_chnl_inprogress = true; |
| rtlphy->sw_chnl_stage = 0; |
| rtlphy->sw_chnl_step = 0; |
| |
| do { |
| if (!rtlphy->sw_chnl_inprogress) |
| break; |
| |
| ret = _rtl92s_phy_sw_chnl_step_by_step(hw, |
| rtlphy->current_channel, |
| &rtlphy->sw_chnl_stage, |
| &rtlphy->sw_chnl_step, &delay); |
| if (!ret) { |
| if (delay > 0) |
| mdelay(delay); |
| else |
| continue; |
| } else { |
| rtlphy->sw_chnl_inprogress = false; |
| } |
| break; |
| } while (true); |
| |
| rtlphy->sw_chnl_inprogress = false; |
| |
| RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n")); |
| |
| return 1; |
| } |
| |
| static void _rtl92se_phy_set_rf_sleep(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u8 u1btmp; |
| |
| u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL); |
| u1btmp |= BIT(0); |
| |
| rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp); |
| rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0); |
| rtl_write_byte(rtlpriv, TXPAUSE, 0xFF); |
| rtl_write_word(rtlpriv, CMDR, 0x57FC); |
| udelay(100); |
| |
| rtl_write_word(rtlpriv, CMDR, 0x77FC); |
| rtl_write_byte(rtlpriv, PHY_CCA, 0x0); |
| udelay(10); |
| |
| rtl_write_word(rtlpriv, CMDR, 0x37FC); |
| udelay(10); |
| |
| rtl_write_word(rtlpriv, CMDR, 0x77FC); |
| udelay(10); |
| |
| rtl_write_word(rtlpriv, CMDR, 0x57FC); |
| |
| /* we should chnge GPIO to input mode |
| * this will drop away current about 25mA*/ |
| rtl8192se_gpiobit3_cfg_inputmode(hw); |
| } |
| |
| bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw, |
| enum rf_pwrstate rfpwr_state) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| bool bresult = true; |
| u8 i, queue_id; |
| struct rtl8192_tx_ring *ring = NULL; |
| |
| if (rfpwr_state == ppsc->rfpwr_state) |
| return false; |
| |
| ppsc->set_rfpowerstate_inprogress = true; |
| |
| switch (rfpwr_state) { |
| case ERFON:{ |
| if ((ppsc->rfpwr_state == ERFOFF) && |
| RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) { |
| |
| bool rtstatus; |
| u32 InitializeCount = 0; |
| do { |
| InitializeCount++; |
| RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, |
| ("IPS Set eRf nic enable\n")); |
| rtstatus = rtl_ps_enable_nic(hw); |
| } while ((rtstatus != true) && |
| (InitializeCount < 10)); |
| |
| RT_CLEAR_PS_LEVEL(ppsc, |
| RT_RF_OFF_LEVL_HALT_NIC); |
| } else { |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, |
| ("awake, sleeped:%d ms " |
| "state_inap:%x\n", |
| jiffies_to_msecs(jiffies - |
| ppsc->last_sleep_jiffies), |
| rtlpriv->psc.state_inap)); |
| ppsc->last_awake_jiffies = jiffies; |
| rtl_write_word(rtlpriv, CMDR, 0x37FC); |
| rtl_write_byte(rtlpriv, TXPAUSE, 0x00); |
| rtl_write_byte(rtlpriv, PHY_CCA, 0x3); |
| } |
| |
| if (mac->link_state == MAC80211_LINKED) |
| rtlpriv->cfg->ops->led_control(hw, |
| LED_CTL_LINK); |
| else |
| rtlpriv->cfg->ops->led_control(hw, |
| LED_CTL_NO_LINK); |
| break; |
| } |
| case ERFOFF:{ |
| if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) { |
| RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, |
| ("IPS Set eRf nic disable\n")); |
| rtl_ps_disable_nic(hw); |
| RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); |
| } else { |
| if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS) |
| rtlpriv->cfg->ops->led_control(hw, |
| LED_CTL_NO_LINK); |
| else |
| rtlpriv->cfg->ops->led_control(hw, |
| LED_CTL_POWER_OFF); |
| } |
| break; |
| } |
| case ERFSLEEP: |
| if (ppsc->rfpwr_state == ERFOFF) |
| break; |
| |
| for (queue_id = 0, i = 0; |
| queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { |
| ring = &pcipriv->dev.tx_ring[queue_id]; |
| if (skb_queue_len(&ring->queue) == 0 || |
| queue_id == BEACON_QUEUE) { |
| queue_id++; |
| continue; |
| } else { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, |
| ("eRf Off/Sleep: " |
| "%d times TcbBusyQueue[%d] = " |
| "%d before doze!\n", |
| (i + 1), queue_id, |
| skb_queue_len(&ring->queue))); |
| |
| udelay(10); |
| i++; |
| } |
| |
| if (i >= MAX_DOZE_WAITING_TIMES_9x) { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, |
| ("\nERFOFF: %d times" |
| "TcbBusyQueue[%d] = %d !\n", |
| MAX_DOZE_WAITING_TIMES_9x, |
| queue_id, |
| skb_queue_len(&ring->queue))); |
| break; |
| } |
| } |
| |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, |
| ("Set ERFSLEEP awaked:%d ms\n", |
| jiffies_to_msecs(jiffies - |
| ppsc->last_awake_jiffies))); |
| |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, |
| ("sleep awaked:%d ms " |
| "state_inap:%x\n", jiffies_to_msecs(jiffies - |
| ppsc->last_awake_jiffies), |
| rtlpriv->psc.state_inap)); |
| ppsc->last_sleep_jiffies = jiffies; |
| _rtl92se_phy_set_rf_sleep(hw); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| ("switch case not process\n")); |
| bresult = false; |
| break; |
| } |
| |
| if (bresult) |
| ppsc->rfpwr_state = rfpwr_state; |
| |
| ppsc->set_rfpowerstate_inprogress = false; |
| |
| return bresult; |
| } |
| |
| static bool _rtl92s_phy_config_rfpa_bias_current(struct ieee80211_hw *hw, |
| enum radio_path rfpath) |
| { |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| bool rtstatus = true; |
| u32 tmpval = 0; |
| |
| /* If inferiority IC, we have to increase the PA bias current */ |
| if (rtlhal->ic_class != IC_INFERIORITY_A) { |
| tmpval = rtl92s_phy_query_rf_reg(hw, rfpath, RF_IPA, 0xf); |
| rtl92s_phy_set_rf_reg(hw, rfpath, RF_IPA, 0xf, tmpval + 1); |
| } |
| |
| return rtstatus; |
| } |
| |
| static void _rtl92s_store_pwrindex_diffrate_offset(struct ieee80211_hw *hw, |
| u32 reg_addr, u32 bitmask, u32 data) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| |
| if (reg_addr == RTXAGC_RATE18_06) |
| rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][0] = |
| data; |
| if (reg_addr == RTXAGC_RATE54_24) |
| rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][1] = |
| data; |
| if (reg_addr == RTXAGC_CCK_MCS32) |
| rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][6] = |
| data; |
| if (reg_addr == RTXAGC_MCS03_MCS00) |
| rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][2] = |
| data; |
| if (reg_addr == RTXAGC_MCS07_MCS04) |
| rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][3] = |
| data; |
| if (reg_addr == RTXAGC_MCS11_MCS08) |
| rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][4] = |
| data; |
| if (reg_addr == RTXAGC_MCS15_MCS12) { |
| rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][5] = |
| data; |
| rtlphy->pwrgroup_cnt++; |
| } |
| } |
| |
| static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| |
| /*RF Interface Sowrtware Control */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfintfs = RFPGA0_XAB_RFINTERFACESW; |
| rtlphy->phyreg_def[RF90_PATH_B].rfintfs = RFPGA0_XAB_RFINTERFACESW; |
| rtlphy->phyreg_def[RF90_PATH_C].rfintfs = RFPGA0_XCD_RFINTERFACESW; |
| rtlphy->phyreg_def[RF90_PATH_D].rfintfs = RFPGA0_XCD_RFINTERFACESW; |
| |
| /* RF Interface Readback Value */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfintfi = RFPGA0_XAB_RFINTERFACERB; |
| rtlphy->phyreg_def[RF90_PATH_B].rfintfi = RFPGA0_XAB_RFINTERFACERB; |
| rtlphy->phyreg_def[RF90_PATH_C].rfintfi = RFPGA0_XCD_RFINTERFACERB; |
| rtlphy->phyreg_def[RF90_PATH_D].rfintfi = RFPGA0_XCD_RFINTERFACERB; |
| |
| /* RF Interface Output (and Enable) */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfintfo = RFPGA0_XA_RFINTERFACEOE; |
| rtlphy->phyreg_def[RF90_PATH_B].rfintfo = RFPGA0_XB_RFINTERFACEOE; |
| rtlphy->phyreg_def[RF90_PATH_C].rfintfo = RFPGA0_XC_RFINTERFACEOE; |
| rtlphy->phyreg_def[RF90_PATH_D].rfintfo = RFPGA0_XD_RFINTERFACEOE; |
| |
| /* RF Interface (Output and) Enable */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfintfe = RFPGA0_XA_RFINTERFACEOE; |
| rtlphy->phyreg_def[RF90_PATH_B].rfintfe = RFPGA0_XB_RFINTERFACEOE; |
| rtlphy->phyreg_def[RF90_PATH_C].rfintfe = RFPGA0_XC_RFINTERFACEOE; |
| rtlphy->phyreg_def[RF90_PATH_D].rfintfe = RFPGA0_XD_RFINTERFACEOE; |
| |
| /* Addr of LSSI. Wirte RF register by driver */ |
| rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset = |
| RFPGA0_XA_LSSIPARAMETER; |
| rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset = |
| RFPGA0_XB_LSSIPARAMETER; |
| rtlphy->phyreg_def[RF90_PATH_C].rf3wire_offset = |
| RFPGA0_XC_LSSIPARAMETER; |
| rtlphy->phyreg_def[RF90_PATH_D].rf3wire_offset = |
| RFPGA0_XD_LSSIPARAMETER; |
| |
| /* RF parameter */ |
| rtlphy->phyreg_def[RF90_PATH_A].rflssi_select = RFPGA0_XAB_RFPARAMETER; |
| rtlphy->phyreg_def[RF90_PATH_B].rflssi_select = RFPGA0_XAB_RFPARAMETER; |
| rtlphy->phyreg_def[RF90_PATH_C].rflssi_select = RFPGA0_XCD_RFPARAMETER; |
| rtlphy->phyreg_def[RF90_PATH_D].rflssi_select = RFPGA0_XCD_RFPARAMETER; |
| |
| /* Tx AGC Gain Stage (same for all path. Should we remove this?) */ |
| rtlphy->phyreg_def[RF90_PATH_A].rftxgain_stage = RFPGA0_TXGAINSTAGE; |
| rtlphy->phyreg_def[RF90_PATH_B].rftxgain_stage = RFPGA0_TXGAINSTAGE; |
| rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE; |
| rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE; |
| |
| /* Tranceiver A~D HSSI Parameter-1 */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1; |
| rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1; |
| rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para1 = RFPGA0_XC_HSSIPARAMETER1; |
| rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para1 = RFPGA0_XD_HSSIPARAMETER1; |
| |
| /* Tranceiver A~D HSSI Parameter-2 */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2; |
| rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2; |
| rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para2 = RFPGA0_XC_HSSIPARAMETER2; |
| rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para2 = RFPGA0_XD_HSSIPARAMETER2; |
| |
| /* RF switch Control */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfswitch_control = |
| RFPGA0_XAB_SWITCHCONTROL; |
| rtlphy->phyreg_def[RF90_PATH_B].rfswitch_control = |
| RFPGA0_XAB_SWITCHCONTROL; |
| rtlphy->phyreg_def[RF90_PATH_C].rfswitch_control = |
| RFPGA0_XCD_SWITCHCONTROL; |
| rtlphy->phyreg_def[RF90_PATH_D].rfswitch_control = |
| RFPGA0_XCD_SWITCHCONTROL; |
| |
| /* AGC control 1 */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfagc_control1 = ROFDM0_XAAGCCORE1; |
| rtlphy->phyreg_def[RF90_PATH_B].rfagc_control1 = ROFDM0_XBAGCCORE1; |
| rtlphy->phyreg_def[RF90_PATH_C].rfagc_control1 = ROFDM0_XCAGCCORE1; |
| rtlphy->phyreg_def[RF90_PATH_D].rfagc_control1 = ROFDM0_XDAGCCORE1; |
| |
| /* AGC control 2 */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfagc_control2 = ROFDM0_XAAGCCORE2; |
| rtlphy->phyreg_def[RF90_PATH_B].rfagc_control2 = ROFDM0_XBAGCCORE2; |
| rtlphy->phyreg_def[RF90_PATH_C].rfagc_control2 = ROFDM0_XCAGCCORE2; |
| rtlphy->phyreg_def[RF90_PATH_D].rfagc_control2 = ROFDM0_XDAGCCORE2; |
| |
| /* RX AFE control 1 */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfrxiq_imbalance = |
| ROFDM0_XARXIQIMBALANCE; |
| rtlphy->phyreg_def[RF90_PATH_B].rfrxiq_imbalance = |
| ROFDM0_XBRXIQIMBALANCE; |
| rtlphy->phyreg_def[RF90_PATH_C].rfrxiq_imbalance = |
| ROFDM0_XCRXIQIMBALANCE; |
| rtlphy->phyreg_def[RF90_PATH_D].rfrxiq_imbalance = |
| ROFDM0_XDRXIQIMBALANCE; |
| |
| /* RX AFE control 1 */ |
| rtlphy->phyreg_def[RF90_PATH_A].rfrx_afe = ROFDM0_XARXAFE; |
| rtlphy->phyreg_def[RF90_PATH_B].rfrx_afe = ROFDM0_XBRXAFE; |
| rtlphy->phyreg_def[RF90_PATH_C].rfrx_afe = ROFDM0_XCRXAFE; |
| rtlphy->phyreg_def[RF90_PATH_D].rfrx_afe = ROFDM0_XDRXAFE; |
| |
| /* Tx AFE control 1 */ |
| rtlphy->phyreg_def[RF90_PATH_A].rftxiq_imbalance = |
| ROFDM0_XATXIQIMBALANCE; |
| rtlphy->phyreg_def[RF90_PATH_B].rftxiq_imbalance = |
| ROFDM0_XBTXIQIMBALANCE; |
| rtlphy->phyreg_def[RF90_PATH_C].rftxiq_imbalance = |
| ROFDM0_XCTXIQIMBALANCE; |
| rtlphy->phyreg_def[RF90_PATH_D].rftxiq_imbalance = |
| ROFDM0_XDTXIQIMBALANCE; |
| |
| /* Tx AFE control 2 */ |
| rtlphy->phyreg_def[RF90_PATH_A].rftx_afe = ROFDM0_XATXAFE; |
| rtlphy->phyreg_def[RF90_PATH_B].rftx_afe = ROFDM0_XBTXAFE; |
| rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE; |
| rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE; |
| |
| /* Tranceiver LSSI Readback */ |
| rtlphy->phyreg_def[RF90_PATH_A].rflssi_readback = |
| RFPGA0_XA_LSSIREADBACK; |
| rtlphy->phyreg_def[RF90_PATH_B].rflssi_readback = |
| RFPGA0_XB_LSSIREADBACK; |
| rtlphy->phyreg_def[RF90_PATH_C].rflssi_readback = |
| RFPGA0_XC_LSSIREADBACK; |
| rtlphy->phyreg_def[RF90_PATH_D].rflssi_readback = |
| RFPGA0_XD_LSSIREADBACK; |
| |
| /* Tranceiver LSSI Readback PI mode */ |
| rtlphy->phyreg_def[RF90_PATH_A].rflssi_readbackpi = |
| TRANSCEIVERA_HSPI_READBACK; |
| rtlphy->phyreg_def[RF90_PATH_B].rflssi_readbackpi = |
| TRANSCEIVERB_HSPI_READBACK; |
| } |
| |
| |
| static bool _rtl92s_phy_config_bb(struct ieee80211_hw *hw, u8 configtype) |
| { |
| int i; |
| u32 *phy_reg_table; |
| u32 *agc_table; |
| u16 phy_reg_len, agc_len; |
| |
| agc_len = AGCTAB_ARRAYLENGTH; |
| agc_table = rtl8192seagctab_array; |
| /* Default RF_type: 2T2R */ |
| phy_reg_len = PHY_REG_2T2RARRAYLENGTH; |
| phy_reg_table = rtl8192sephy_reg_2t2rarray; |
| |
| if (configtype == BASEBAND_CONFIG_PHY_REG) { |
| for (i = 0; i < phy_reg_len; i = i + 2) { |
| if (phy_reg_table[i] == 0xfe) |
| mdelay(50); |
| else if (phy_reg_table[i] == 0xfd) |
| mdelay(5); |
| else if (phy_reg_table[i] == 0xfc) |
| mdelay(1); |
| else if (phy_reg_table[i] == 0xfb) |
| udelay(50); |
| else if (phy_reg_table[i] == 0xfa) |
| udelay(5); |
| else if (phy_reg_table[i] == 0xf9) |
| udelay(1); |
| |
| /* Add delay for ECS T20 & LG malow platform, */ |
| udelay(1); |
| |
| rtl92s_phy_set_bb_reg(hw, phy_reg_table[i], MASKDWORD, |
| phy_reg_table[i + 1]); |
| } |
| } else if (configtype == BASEBAND_CONFIG_AGC_TAB) { |
| for (i = 0; i < agc_len; i = i + 2) { |
| rtl92s_phy_set_bb_reg(hw, agc_table[i], MASKDWORD, |
| agc_table[i + 1]); |
| |
| /* Add delay for ECS T20 & LG malow platform */ |
| udelay(1); |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool _rtl92s_phy_set_bb_to_diff_rf(struct ieee80211_hw *hw, |
| u8 configtype) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| u32 *phy_regarray2xtxr_table; |
| u16 phy_regarray2xtxr_len; |
| int i; |
| |
| if (rtlphy->rf_type == RF_1T1R) { |
| phy_regarray2xtxr_table = rtl8192sephy_changeto_1t1rarray; |
| phy_regarray2xtxr_len = PHY_CHANGETO_1T1RARRAYLENGTH; |
| } else if (rtlphy->rf_type == RF_1T2R) { |
| phy_regarray2xtxr_table = rtl8192sephy_changeto_1t2rarray; |
| phy_regarray2xtxr_len = PHY_CHANGETO_1T2RARRAYLENGTH; |
| } else { |
| return false; |
| } |
| |
| if (configtype == BASEBAND_CONFIG_PHY_REG) { |
| for (i = 0; i < phy_regarray2xtxr_len; i = i + 3) { |
| if (phy_regarray2xtxr_table[i] == 0xfe) |
| mdelay(50); |
| else if (phy_regarray2xtxr_table[i] == 0xfd) |
| mdelay(5); |
| else if (phy_regarray2xtxr_table[i] == 0xfc) |
| mdelay(1); |
| else if (phy_regarray2xtxr_table[i] == 0xfb) |
| udelay(50); |
| else if (phy_regarray2xtxr_table[i] == 0xfa) |
| udelay(5); |
| else if (phy_regarray2xtxr_table[i] == 0xf9) |
| udelay(1); |
| |
| rtl92s_phy_set_bb_reg(hw, phy_regarray2xtxr_table[i], |
| phy_regarray2xtxr_table[i + 1], |
| phy_regarray2xtxr_table[i + 2]); |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool _rtl92s_phy_config_bb_with_pg(struct ieee80211_hw *hw, |
| u8 configtype) |
| { |
| int i; |
| u32 *phy_table_pg; |
| u16 phy_pg_len; |
| |
| phy_pg_len = PHY_REG_ARRAY_PGLENGTH; |
| phy_table_pg = rtl8192sephy_reg_array_pg; |
| |
| if (configtype == BASEBAND_CONFIG_PHY_REG) { |
| for (i = 0; i < phy_pg_len; i = i + 3) { |
| if (phy_table_pg[i] == 0xfe) |
| mdelay(50); |
| else if (phy_table_pg[i] == 0xfd) |
| mdelay(5); |
| else if (phy_table_pg[i] == 0xfc) |
| mdelay(1); |
| else if (phy_table_pg[i] == 0xfb) |
| udelay(50); |
| else if (phy_table_pg[i] == 0xfa) |
| udelay(5); |
| else if (phy_table_pg[i] == 0xf9) |
| udelay(1); |
| |
| _rtl92s_store_pwrindex_diffrate_offset(hw, |
| phy_table_pg[i], |
| phy_table_pg[i + 1], |
| phy_table_pg[i + 2]); |
| rtl92s_phy_set_bb_reg(hw, phy_table_pg[i], |
| phy_table_pg[i + 1], |
| phy_table_pg[i + 2]); |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| bool rtstatus = true; |
| |
| /* 1. Read PHY_REG.TXT BB INIT!! */ |
| /* We will separate as 1T1R/1T2R/1T2R_GREEN/2T2R */ |
| if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_2T2R || |
| rtlphy->rf_type == RF_1T1R || rtlphy->rf_type == RF_2T2R_GREEN) { |
| rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_PHY_REG); |
| |
| if (rtlphy->rf_type != RF_2T2R && |
| rtlphy->rf_type != RF_2T2R_GREEN) |
| /* so we should reconfig BB reg with the right |
| * PHY parameters. */ |
| rtstatus = _rtl92s_phy_set_bb_to_diff_rf(hw, |
| BASEBAND_CONFIG_PHY_REG); |
| } else { |
| rtstatus = false; |
| } |
| |
| if (rtstatus != true) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, |
| ("Write BB Reg Fail!!")); |
| goto phy_BB8190_Config_ParaFile_Fail; |
| } |
| |
| /* 2. If EEPROM or EFUSE autoload OK, We must config by |
| * PHY_REG_PG.txt */ |
| if (rtlefuse->autoload_failflag == false) { |
| rtlphy->pwrgroup_cnt = 0; |
| |
| rtstatus = _rtl92s_phy_config_bb_with_pg(hw, |
| BASEBAND_CONFIG_PHY_REG); |
| } |
| if (rtstatus != true) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, |
| ("_rtl92s_phy_bb_config_parafile(): " |
| "BB_PG Reg Fail!!")); |
| goto phy_BB8190_Config_ParaFile_Fail; |
| } |
| |
| /* 3. BB AGC table Initialization */ |
| rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB); |
| |
| if (rtstatus != true) { |
| printk(KERN_ERR "_rtl92s_phy_bb_config_parafile(): " |
| "AGC Table Fail\n"); |
| goto phy_BB8190_Config_ParaFile_Fail; |
| } |
| |
| /* Check if the CCK HighPower is turned ON. */ |
| /* This is used to calculate PWDB. */ |
| rtlphy->cck_high_power = (bool)(rtl92s_phy_query_bb_reg(hw, |
| RFPGA0_XA_HSSIPARAMETER2, 0x200)); |
| |
| phy_BB8190_Config_ParaFile_Fail: |
| return rtstatus; |
| } |
| |
| u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| int i; |
| bool rtstatus = true; |
| u32 *radio_a_table; |
| u32 *radio_b_table; |
| u16 radio_a_tblen, radio_b_tblen; |
| |
| radio_a_tblen = RADIOA_1T_ARRAYLENGTH; |
| radio_a_table = rtl8192seradioa_1t_array; |
| |
| /* Using Green mode array table for RF_2T2R_GREEN */ |
| if (rtlphy->rf_type == RF_2T2R_GREEN) { |
| radio_b_table = rtl8192seradiob_gm_array; |
| radio_b_tblen = RADIOB_GM_ARRAYLENGTH; |
| } else { |
| radio_b_table = rtl8192seradiob_array; |
| radio_b_tblen = RADIOB_ARRAYLENGTH; |
| } |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Radio No %x\n", rfpath)); |
| rtstatus = true; |
| |
| switch (rfpath) { |
| case RF90_PATH_A: |
| for (i = 0; i < radio_a_tblen; i = i + 2) { |
| if (radio_a_table[i] == 0xfe) |
| /* Delay specific ms. Only RF configuration |
| * requires delay. */ |
| mdelay(50); |
| else if (radio_a_table[i] == 0xfd) |
| mdelay(5); |
| else if (radio_a_table[i] == 0xfc) |
| mdelay(1); |
| else if (radio_a_table[i] == 0xfb) |
| udelay(50); |
| else if (radio_a_table[i] == 0xfa) |
| udelay(5); |
| else if (radio_a_table[i] == 0xf9) |
| udelay(1); |
| else |
| rtl92s_phy_set_rf_reg(hw, rfpath, |
| radio_a_table[i], |
| MASK20BITS, |
| radio_a_table[i + 1]); |
| |
| /* Add delay for ECS T20 & LG malow platform */ |
| udelay(1); |
| } |
| |
| /* PA Bias current for inferiority IC */ |
| _rtl92s_phy_config_rfpa_bias_current(hw, rfpath); |
| break; |
| case RF90_PATH_B: |
| for (i = 0; i < radio_b_tblen; i = i + 2) { |
| if (radio_b_table[i] == 0xfe) |
| /* Delay specific ms. Only RF configuration |
| * requires delay.*/ |
| mdelay(50); |
| else if (radio_b_table[i] == 0xfd) |
| mdelay(5); |
| else if (radio_b_table[i] == 0xfc) |
| mdelay(1); |
| else if (radio_b_table[i] == 0xfb) |
| udelay(50); |
| else if (radio_b_table[i] == 0xfa) |
| udelay(5); |
| else if (radio_b_table[i] == 0xf9) |
| udelay(1); |
| else |
| rtl92s_phy_set_rf_reg(hw, rfpath, |
| radio_b_table[i], |
| MASK20BITS, |
| radio_b_table[i + 1]); |
| |
| /* Add delay for ECS T20 & LG malow platform */ |
| udelay(1); |
| } |
| break; |
| case RF90_PATH_C: |
| ; |
| break; |
| case RF90_PATH_D: |
| ; |
| break; |
| default: |
| break; |
| } |
| |
| return rtstatus; |
| } |
| |
| |
| bool rtl92s_phy_mac_config(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u32 i; |
| u32 arraylength; |
| u32 *ptraArray; |
| |
| arraylength = MAC_2T_ARRAYLENGTH; |
| ptraArray = rtl8192semac_2t_array; |
| |
| for (i = 0; i < arraylength; i = i + 2) |
| rtl_write_byte(rtlpriv, ptraArray[i], (u8)ptraArray[i + 1]); |
| |
| return true; |
| } |
| |
| |
| bool rtl92s_phy_bb_config(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| bool rtstatus = true; |
| u8 pathmap, index, rf_num = 0; |
| u8 path1, path2; |
| |
| _rtl92s_phy_init_register_definition(hw); |
| |
| /* Config BB and AGC */ |
| rtstatus = _rtl92s_phy_bb_config_parafile(hw); |
| |
| |
| /* Check BB/RF confiuration setting. */ |
| /* We only need to configure RF which is turned on. */ |
| path1 = (u8)(rtl92s_phy_query_bb_reg(hw, RFPGA0_TXINFO, 0xf)); |
| mdelay(10); |
| path2 = (u8)(rtl92s_phy_query_bb_reg(hw, ROFDM0_TRXPATHENABLE, 0xf)); |
| pathmap = path1 | path2; |
| |
| rtlphy->rf_pathmap = pathmap; |
| for (index = 0; index < 4; index++) { |
| if ((pathmap >> index) & 0x1) |
| rf_num++; |
| } |
| |
| if ((rtlphy->rf_type == RF_1T1R && rf_num != 1) || |
| (rtlphy->rf_type == RF_1T2R && rf_num != 2) || |
| (rtlphy->rf_type == RF_2T2R && rf_num != 2) || |
| (rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, |
| ("RF_Type(%x) does not match " |
| "RF_Num(%x)!!\n", rtlphy->rf_type, rf_num)); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, |
| ("path1 0x%x, path2 0x%x, pathmap " |
| "0x%x\n", path1, path2, pathmap)); |
| } |
| |
| return rtstatus; |
| } |
| |
| bool rtl92s_phy_rf_config(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| |
| /* Initialize general global value */ |
| if (rtlphy->rf_type == RF_1T1R) |
| rtlphy->num_total_rfpath = 1; |
| else |
| rtlphy->num_total_rfpath = 2; |
| |
| /* Config BB and RF */ |
| return rtl92s_phy_rf6052_config(hw); |
| } |
| |
| void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| |
| /* read rx initial gain */ |
| rtlphy->default_initialgain[0] = rtl_get_bbreg(hw, |
| ROFDM0_XAAGCCORE1, MASKBYTE0); |
| rtlphy->default_initialgain[1] = rtl_get_bbreg(hw, |
| ROFDM0_XBAGCCORE1, MASKBYTE0); |
| rtlphy->default_initialgain[2] = rtl_get_bbreg(hw, |
| ROFDM0_XCAGCCORE1, MASKBYTE0); |
| rtlphy->default_initialgain[3] = rtl_get_bbreg(hw, |
| ROFDM0_XDAGCCORE1, MASKBYTE0); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Default initial gain " |
| "(c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x)\n", |
| rtlphy->default_initialgain[0], |
| rtlphy->default_initialgain[1], |
| rtlphy->default_initialgain[2], |
| rtlphy->default_initialgain[3])); |
| |
| /* read framesync */ |
| rtlphy->framesync = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR3, MASKBYTE0); |
| rtlphy->framesync_c34 = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR2, |
| MASKDWORD); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, |
| ("Default framesync (0x%x) = 0x%x\n", |
| ROFDM0_RXDETECTOR3, rtlphy->framesync)); |
| |
| } |
| |
| static void _rtl92s_phy_get_txpower_index(struct ieee80211_hw *hw, u8 channel, |
| u8 *cckpowerlevel, u8 *ofdmpowerLevel) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| u8 index = (channel - 1); |
| |
| /* 1. CCK */ |
| /* RF-A */ |
| cckpowerlevel[0] = rtlefuse->txpwrlevel_cck[0][index]; |
| /* RF-B */ |
| cckpowerlevel[1] = rtlefuse->txpwrlevel_cck[1][index]; |
| |
| /* 2. OFDM for 1T or 2T */ |
| if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_1T1R) { |
| /* Read HT 40 OFDM TX power */ |
| ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_1s[0][index]; |
| ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_1s[1][index]; |
| } else if (rtlphy->rf_type == RF_2T2R) { |
| /* Read HT 40 OFDM TX power */ |
| ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_2s[0][index]; |
| ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_2s[1][index]; |
| } |
| } |
| |
| static void _rtl92s_phy_ccxpower_indexcheck(struct ieee80211_hw *hw, |
| u8 channel, u8 *cckpowerlevel, u8 *ofdmpowerlevel) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| |
| rtlphy->cur_cck_txpwridx = cckpowerlevel[0]; |
| rtlphy->cur_ofdm24g_txpwridx = ofdmpowerlevel[0]; |
| } |
| |
| void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8 channel) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| /* [0]:RF-A, [1]:RF-B */ |
| u8 cckpowerlevel[2], ofdmpowerLevel[2]; |
| |
| if (rtlefuse->txpwr_fromeprom == false) |
| return; |
| |
| /* Mainly we use RF-A Tx Power to write the Tx Power registers, |
| * but the RF-B Tx Power must be calculated by the antenna diff. |
| * So we have to rewrite Antenna gain offset register here. |
| * Please refer to BB register 0x80c |
| * 1. For CCK. |
| * 2. For OFDM 1T or 2T */ |
| _rtl92s_phy_get_txpower_index(hw, channel, &cckpowerlevel[0], |
| &ofdmpowerLevel[0]); |
| |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, |
| ("Channel-%d, cckPowerLevel (A / B) = " |
| "0x%x / 0x%x, ofdmPowerLevel (A / B) = 0x%x / 0x%x\n", |
| channel, cckpowerlevel[0], cckpowerlevel[1], |
| ofdmpowerLevel[0], ofdmpowerLevel[1])); |
| |
| _rtl92s_phy_ccxpower_indexcheck(hw, channel, &cckpowerlevel[0], |
| &ofdmpowerLevel[0]); |
| |
| rtl92s_phy_rf6052_set_ccktxpower(hw, cckpowerlevel[0]); |
| rtl92s_phy_rf6052_set_ofdmtxpower(hw, &ofdmpowerLevel[0], channel); |
| |
| } |
| |
| void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u16 pollingcnt = 10000; |
| u32 tmpvalue; |
| |
| /* Make sure that CMD IO has be accepted by FW. */ |
| do { |
| udelay(10); |
| |
| tmpvalue = rtl_read_dword(rtlpriv, WFM5); |
| if (tmpvalue == 0) |
| break; |
| } while (--pollingcnt); |
| |
| if (pollingcnt == 0) |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Set FW Cmd fail!!\n")); |
| } |
| |
| |
| static void _rtl92s_phy_set_fwcmd_io(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| u32 input, current_aid = 0; |
| |
| if (is_hal_stop(rtlhal)) |
| return; |
| |
| /* We re-map RA related CMD IO to combinational ones */ |
| /* if FW version is v.52 or later. */ |
| switch (rtlhal->current_fwcmd_io) { |
| case FW_CMD_RA_REFRESH_N: |
| rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_N_COMB; |
| break; |
| case FW_CMD_RA_REFRESH_BG: |
| rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_BG_COMB; |
| break; |
| default: |
| break; |
| } |
| |
| switch (rtlhal->current_fwcmd_io) { |
| case FW_CMD_RA_RESET: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, |
| ("FW_CMD_RA_RESET\n")); |
| rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| break; |
| case FW_CMD_RA_ACTIVE: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, |
| ("FW_CMD_RA_ACTIVE\n")); |
| rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| break; |
| case FW_CMD_RA_REFRESH_N: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, |
| ("FW_CMD_RA_REFRESH_N\n")); |
| input = FW_RA_REFRESH; |
| rtl_write_dword(rtlpriv, WFM5, input); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| rtl_write_dword(rtlpriv, WFM5, FW_RA_ENABLE_RSSI_MASK); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| break; |
| case FW_CMD_RA_REFRESH_BG: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, |
| ("FW_CMD_RA_REFRESH_BG\n")); |
| rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| rtl_write_dword(rtlpriv, WFM5, FW_RA_DISABLE_RSSI_MASK); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| break; |
| case FW_CMD_RA_REFRESH_N_COMB: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, |
| ("FW_CMD_RA_REFRESH_N_COMB\n")); |
| input = FW_RA_IOT_N_COMB; |
| rtl_write_dword(rtlpriv, WFM5, input); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| break; |
| case FW_CMD_RA_REFRESH_BG_COMB: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, |
| ("FW_CMD_RA_REFRESH_BG_COMB\n")); |
| input = FW_RA_IOT_BG_COMB; |
| rtl_write_dword(rtlpriv, WFM5, input); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| break; |
| case FW_CMD_IQK_ENABLE: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, |
| ("FW_CMD_IQK_ENABLE\n")); |
| rtl_write_dword(rtlpriv, WFM5, FW_IQK_ENABLE); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| break; |
| case FW_CMD_PAUSE_DM_BY_SCAN: |
| /* Lower initial gain */ |
| rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17); |
| rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17); |
| /* CCA threshold */ |
| rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40); |
| break; |
| case FW_CMD_RESUME_DM_BY_SCAN: |
| /* CCA threshold */ |
| rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd); |
| rtl92s_phy_set_txpower(hw, rtlphy->current_channel); |
| break; |
| case FW_CMD_HIGH_PWR_DISABLE: |
| if (rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) |
| break; |
| |
| /* Lower initial gain */ |
| rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17); |
| rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17); |
| /* CCA threshold */ |
| rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40); |
| break; |
| case FW_CMD_HIGH_PWR_ENABLE: |
| if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) || |
| (rtlpriv->dm.dynamic_txpower_enable == true)) |
| break; |
| |
| /* CCA threshold */ |
| rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd); |
| break; |
| case FW_CMD_LPS_ENTER: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, |
| ("FW_CMD_LPS_ENTER\n")); |
| current_aid = rtlpriv->mac80211.assoc_id; |
| rtl_write_dword(rtlpriv, WFM5, (FW_LPS_ENTER | |
| ((current_aid | 0xc000) << 8))); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| /* FW set TXOP disable here, so disable EDCA |
| * turbo mode until driver leave LPS */ |
| break; |
| case FW_CMD_LPS_LEAVE: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, |
| ("FW_CMD_LPS_LEAVE\n")); |
| rtl_write_dword(rtlpriv, WFM5, FW_LPS_LEAVE); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| break; |
| case FW_CMD_ADD_A2_ENTRY: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, |
| ("FW_CMD_ADD_A2_ENTRY\n")); |
| rtl_write_dword(rtlpriv, WFM5, FW_ADD_A2_ENTRY); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| break; |
| case FW_CMD_CTRL_DM_BY_DRIVER: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, |
| ("FW_CMD_CTRL_DM_BY_DRIVER\n")); |
| rtl_write_dword(rtlpriv, WFM5, FW_CTRL_DM_BY_DRIVER); |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| break; |
| |
| default: |
| break; |
| } |
| |
| rtl92s_phy_chk_fwcmd_iodone(hw); |
| |
| /* Clear FW CMD operation flag. */ |
| rtlhal->set_fwcmd_inprogress = false; |
| } |
| |
| bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fw_cmdio) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| u32 fw_param = FW_CMD_IO_PARA_QUERY(rtlpriv); |
| u16 fw_cmdmap = FW_CMD_IO_QUERY(rtlpriv); |
| bool bPostProcessing = false; |
| |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, |
| ("Set FW Cmd(%#x), set_fwcmd_inprogress(%d)\n", |
| fw_cmdio, rtlhal->set_fwcmd_inprogress)); |
| |
| do { |
| /* We re-map to combined FW CMD ones if firmware version */ |
| /* is v.53 or later. */ |
| switch (fw_cmdio) { |
| case FW_CMD_RA_REFRESH_N: |
| fw_cmdio = FW_CMD_RA_REFRESH_N_COMB; |
| break; |
| case FW_CMD_RA_REFRESH_BG: |
| fw_cmdio = FW_CMD_RA_REFRESH_BG_COMB; |
| break; |
| default: |
| break; |
| } |
| |
| /* If firmware version is v.62 or later, |
| * use FW_CMD_IO_SET for FW_CMD_CTRL_DM_BY_DRIVER */ |
| if (hal_get_firmwareversion(rtlpriv) >= 0x3E) { |
| if (fw_cmdio == FW_CMD_CTRL_DM_BY_DRIVER) |
| fw_cmdio = FW_CMD_CTRL_DM_BY_DRIVER_NEW; |
| } |
| |
| |
| /* We shall revise all FW Cmd IO into Reg0x364 |
| * DM map table in the future. */ |
| switch (fw_cmdio) { |
| case FW_CMD_RA_INIT: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, ("RA init!!\n")); |
| fw_cmdmap |= FW_RA_INIT_CTL; |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| /* Clear control flag to sync with FW. */ |
| FW_CMD_IO_CLR(rtlpriv, FW_RA_INIT_CTL); |
| break; |
| case FW_CMD_DIG_DISABLE: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, |
| ("Set DIG disable!!\n")); |
| fw_cmdmap &= ~FW_DIG_ENABLE_CTL; |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| break; |
| case FW_CMD_DIG_ENABLE: |
| case FW_CMD_DIG_RESUME: |
| if (!(rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE)) { |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, |
| ("Set DIG enable or resume!!\n")); |
| fw_cmdmap |= (FW_DIG_ENABLE_CTL | FW_SS_CTL); |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| } |
| break; |
| case FW_CMD_DIG_HALT: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, |
| ("Set DIG halt!!\n")); |
| fw_cmdmap &= ~(FW_DIG_ENABLE_CTL | FW_SS_CTL); |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| break; |
| case FW_CMD_TXPWR_TRACK_THERMAL: { |
| u8 thermalval = 0; |
| fw_cmdmap |= FW_PWR_TRK_CTL; |
| |
| /* Clear FW parameter in terms of thermal parts. */ |
| fw_param &= FW_PWR_TRK_PARAM_CLR; |
| |
| thermalval = rtlpriv->dm.thermalvalue; |
| fw_param |= ((thermalval << 24) | |
| (rtlefuse->thermalmeter[0] << 16)); |
| |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, |
| ("Set TxPwr tracking!! " |
| "FwCmdMap(%#x), FwParam(%#x)\n", |
| fw_cmdmap, fw_param)); |
| |
| FW_CMD_PARA_SET(rtlpriv, fw_param); |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| |
| /* Clear control flag to sync with FW. */ |
| FW_CMD_IO_CLR(rtlpriv, FW_PWR_TRK_CTL); |
| } |
| break; |
| /* The following FW CMDs are only compatible to |
| * v.53 or later. */ |
| case FW_CMD_RA_REFRESH_N_COMB: |
| fw_cmdmap |= FW_RA_N_CTL; |
| |
| /* Clear RA BG mode control. */ |
| fw_cmdmap &= ~(FW_RA_BG_CTL | FW_RA_INIT_CTL); |
| |
| /* Clear FW parameter in terms of RA parts. */ |
| fw_param &= FW_RA_PARAM_CLR; |
| |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, |
| ("[FW CMD] [New Version] " |
| "Set RA/IOT Comb in n mode!! FwCmdMap(%#x), " |
| "FwParam(%#x)\n", fw_cmdmap, fw_param)); |
| |
| FW_CMD_PARA_SET(rtlpriv, fw_param); |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| |
| /* Clear control flag to sync with FW. */ |
| FW_CMD_IO_CLR(rtlpriv, FW_RA_N_CTL); |
| break; |
| case FW_CMD_RA_REFRESH_BG_COMB: |
| fw_cmdmap |= FW_RA_BG_CTL; |
| |
| /* Clear RA n-mode control. */ |
| fw_cmdmap &= ~(FW_RA_N_CTL | FW_RA_INIT_CTL); |
| /* Clear FW parameter in terms of RA parts. */ |
| fw_param &= FW_RA_PARAM_CLR; |
| |
| FW_CMD_PARA_SET(rtlpriv, fw_param); |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| |
| /* Clear control flag to sync with FW. */ |
| FW_CMD_IO_CLR(rtlpriv, FW_RA_BG_CTL); |
| break; |
| case FW_CMD_IQK_ENABLE: |
| fw_cmdmap |= FW_IQK_CTL; |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| /* Clear control flag to sync with FW. */ |
| FW_CMD_IO_CLR(rtlpriv, FW_IQK_CTL); |
| break; |
| /* The following FW CMD is compatible to v.62 or later. */ |
| case FW_CMD_CTRL_DM_BY_DRIVER_NEW: |
| fw_cmdmap |= FW_DRIVER_CTRL_DM_CTL; |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| break; |
| /* The followed FW Cmds needs post-processing later. */ |
| case FW_CMD_RESUME_DM_BY_SCAN: |
| fw_cmdmap |= (FW_DIG_ENABLE_CTL | |
| FW_HIGH_PWR_ENABLE_CTL | |
| FW_SS_CTL); |
| |
| if (rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE || |
| !digtable.dig_enable_flag) |
| fw_cmdmap &= ~FW_DIG_ENABLE_CTL; |
| |
| if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) || |
| (rtlpriv->dm.dynamic_txpower_enable == true)) |
| fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL; |
| |
| if ((digtable.dig_ext_port_stage == |
| DIG_EXT_PORT_STAGE_0) || |
| (digtable.dig_ext_port_stage == |
| DIG_EXT_PORT_STAGE_1)) |
| fw_cmdmap &= ~FW_DIG_ENABLE_CTL; |
| |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| bPostProcessing = true; |
| break; |
| case FW_CMD_PAUSE_DM_BY_SCAN: |
| fw_cmdmap &= ~(FW_DIG_ENABLE_CTL | |
| FW_HIGH_PWR_ENABLE_CTL | |
| FW_SS_CTL); |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| bPostProcessing = true; |
| break; |
| case FW_CMD_HIGH_PWR_DISABLE: |
| fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL; |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| bPostProcessing = true; |
| break; |
| case FW_CMD_HIGH_PWR_ENABLE: |
| if (!(rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) && |
| (rtlpriv->dm.dynamic_txpower_enable != true)) { |
| fw_cmdmap |= (FW_HIGH_PWR_ENABLE_CTL | |
| FW_SS_CTL); |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| bPostProcessing = true; |
| } |
| break; |
| case FW_CMD_DIG_MODE_FA: |
| fw_cmdmap |= FW_FA_CTL; |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| break; |
| case FW_CMD_DIG_MODE_SS: |
| fw_cmdmap &= ~FW_FA_CTL; |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| break; |
| case FW_CMD_PAPE_CONTROL: |
| RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, |
| ("[FW CMD] Set PAPE Control\n")); |
| fw_cmdmap &= ~FW_PAPE_CTL_BY_SW_HW; |
| |
| FW_CMD_IO_SET(rtlpriv, fw_cmdmap); |
| break; |
| default: |
| /* Pass to original FW CMD processing callback |
| * routine. */ |
| bPostProcessing = true; |
| break; |
| } |
| } while (false); |
| |
| /* We shall post processing these FW CMD if |
| * variable bPostProcessing is set. */ |
| if (bPostProcessing && !rtlhal->set_fwcmd_inprogress) { |
| rtlhal->set_fwcmd_inprogress = true; |
| /* Update current FW Cmd for callback use. */ |
| rtlhal->current_fwcmd_io = fw_cmdio; |
| } else { |
| return false; |
| } |
| |
| _rtl92s_phy_set_fwcmd_io(hw); |
| return true; |
| } |
| |
| static void _rtl92s_phy_check_ephy_switchready(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u32 delay = 100; |
| u8 regu1; |
| |
| regu1 = rtl_read_byte(rtlpriv, 0x554); |
| while ((regu1 & BIT(5)) && (delay > 0)) { |
| regu1 = rtl_read_byte(rtlpriv, 0x554); |
| delay--; |
| /* We delay only 50us to prevent |
| * being scheduled out. */ |
| udelay(50); |
| } |
| } |
| |
| void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| |
| /* The way to be capable to switch clock request |
| * when the PG setting does not support clock request. |
| * This is the backdoor solution to switch clock |
| * request before ASPM or D3. */ |
| rtl_write_dword(rtlpriv, 0x540, 0x73c11); |
| rtl_write_dword(rtlpriv, 0x548, 0x2407c); |
| |
| /* Switch EPHY parameter!!!! */ |
| rtl_write_word(rtlpriv, 0x550, 0x1000); |
| rtl_write_byte(rtlpriv, 0x554, 0x20); |
| _rtl92s_phy_check_ephy_switchready(hw); |
| |
| rtl_write_word(rtlpriv, 0x550, 0xa0eb); |
| rtl_write_byte(rtlpriv, 0x554, 0x3e); |
| _rtl92s_phy_check_ephy_switchready(hw); |
| |
| rtl_write_word(rtlpriv, 0x550, 0xff80); |
| rtl_write_byte(rtlpriv, 0x554, 0x39); |
| _rtl92s_phy_check_ephy_switchready(hw); |
| |
| /* Delay L1 enter time */ |
| if (ppsc->support_aspm && !ppsc->support_backdoor) |
| rtl_write_byte(rtlpriv, 0x560, 0x40); |
| else |
| rtl_write_byte(rtlpriv, 0x560, 0x00); |
| |
| } |
| |
| void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 BeaconInterval) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| rtl_write_dword(rtlpriv, WFM5, 0xF1000000 | (BeaconInterval << 8)); |
| } |