blob: 827f614261f6f0041096514be33f90540c61a608 [file] [log] [blame]
Tony Lindgren0f0cfc62013-12-18 13:13:21 -08001/*
2 * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
3 */
4
Dmitry Lifshitze5ee0422014-11-02 13:19:58 +02005/ {
6 tfp410: encoder@0 {
7 compatible = "ti,tfp410";
8
9 powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
10
11 pinctrl-names = "default";
12 pinctrl-0 = <&tfp410_pins>;
13
14 ports {
15 #address-cells = <1>;
16 #size-cells = <0>;
17
18 port@0 {
19 reg = <0>;
20
21 tfp410_in: endpoint@0 {
22 remote-endpoint = <&dpi_out>;
23 };
24 };
25
26 port@1 {
27 reg = <1>;
28
29 tfp410_out: endpoint@0 {
30 remote-endpoint = <&dvi_connector_in>;
31 };
32 };
33 };
34 };
35
36 dvi0: connector@0 {
37 compatible = "dvi-connector";
38 label = "dvi";
39
40 port {
41 dvi_connector_in: endpoint {
42 remote-endpoint = <&tfp410_out>;
43 };
44 };
45 };
Dmitry Lifshitz01e9ef62014-11-23 11:42:02 +020046
47 audio_amp: audio_amp {
48 compatible = "regulator-fixed";
49 regulator-name = "audio_amp";
50 pinctrl-names = "default";
51 pinctrl-0 = <&sb_t35_audio_amp>;
52 gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */
53 enable-active-low;
54 regulator-always-on;
55 };
Dmitry Lifshitze5ee0422014-11-02 13:19:58 +020056};
57
Dmitry Lifshitzd234e422014-01-12 15:22:45 +020058&omap3_pmx_core {
59 smsc2_pins: pinmux_smsc2_pins {
60 pinctrl-single,pins = <
61 OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
62 OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
63 >;
64 };
Dmitry Lifshitze5ee0422014-11-02 13:19:58 +020065
66 tfp410_pins: pinmux_tfp410_pins {
67 pinctrl-single,pins = <
68 OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
69 >;
70 };
Dmitry Lifshitze35351b2014-11-18 11:13:20 +020071
72 i2c3_pins: pinmux_i2c3_pins {
73 pinctrl-single,pins = <
74 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
75 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
76 >;
77 };
Dmitry Lifshitz01e9ef62014-11-23 11:42:02 +020078
79 sb_t35_audio_amp: pinmux_sb_t35_audio_amp {
80 pinctrl-single,pins = <
81 OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
82 >;
83 };
Dmitry Lifshitze35351b2014-11-18 11:13:20 +020084};
85
86&i2c3 {
87 pinctrl-names = "default";
88 pinctrl-0 = <&i2c3_pins>;
89
90 clock-frequency = <400000>;
91
92 at24@50 {
93 compatible = "at24,24c02";
94 pagesize = <16>;
95 reg = <0x50>;
96 };
Dmitry Lifshitzd234e422014-01-12 15:22:45 +020097};
98
Tony Lindgren0f0cfc62013-12-18 13:13:21 -080099&gpmc {
100 ranges = <4 0 0x2d000000 0x01000000>;
101
102 smsc2: ethernet@4,0 {
103 compatible = "smsc,lan9221", "smsc,lan9115";
Dmitry Lifshitzd234e422014-01-12 15:22:45 +0200104 pinctrl-names = "default";
105 pinctrl-0 = <&smsc2_pins>;
Tony Lindgren0f0cfc62013-12-18 13:13:21 -0800106 interrupt-parent = <&gpio3>;
107 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
108 reg = <4 0 0xff>;
109 bank-width = <2>;
Tony Lindgren13aec8e2014-11-03 16:48:16 -0800110 gpmc,device-width = <1>;
111 gpmc,cycle2cycle-samecsen = <1>;
112 gpmc,cycle2cycle-diffcsen = <1>;
113 gpmc,cs-on-ns = <5>;
114 gpmc,cs-rd-off-ns = <150>;
115 gpmc,cs-wr-off-ns = <150>;
116 gpmc,adv-on-ns = <0>;
117 gpmc,adv-rd-off-ns = <15>;
118 gpmc,adv-wr-off-ns = <40>;
119 gpmc,oe-on-ns = <45>;
120 gpmc,oe-off-ns = <140>;
121 gpmc,we-on-ns = <45>;
122 gpmc,we-off-ns = <140>;
123 gpmc,rd-cycle-ns = <155>;
124 gpmc,wr-cycle-ns = <155>;
125 gpmc,access-ns = <120>;
126 gpmc,page-burst-access-ns = <20>;
127 gpmc,bus-turnaround-ns = <75>;
128 gpmc,cycle2cycle-delay-ns = <75>;
129 gpmc,wait-monitoring-ns = <0>;
130 gpmc,clk-activation-ns = <0>;
131 gpmc,wr-data-mux-bus-ns = <0>;
132 gpmc,wr-access-ns = <0>;
Tony Lindgrende9949a2014-04-23 11:04:30 -0700133 vddvario-supply = <&vddvario>;
134 vdd33a-supply = <&vdd33a>;
Tony Lindgren0f0cfc62013-12-18 13:13:21 -0800135 reg-io-width = <4>;
136 smsc,save-mac-address;
137 };
138};