James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Serial Attached SCSI (SAS) Expander discovery and configuration |
| 3 | * |
| 4 | * Copyright (C) 2005 Adaptec, Inc. All rights reserved. |
| 5 | * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> |
| 6 | * |
| 7 | * This file is licensed under GPLv2. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License as |
| 11 | * published by the Free Software Foundation; either version 2 of the |
| 12 | * License, or (at your option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, but |
| 15 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 17 | * General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program; if not, write to the Free Software |
| 21 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 22 | * |
| 23 | */ |
| 24 | |
| 25 | #include <linux/pci.h> |
| 26 | #include <linux/scatterlist.h> |
| 27 | |
| 28 | #include "sas_internal.h" |
| 29 | |
| 30 | #include <scsi/scsi_transport.h> |
| 31 | #include <scsi/scsi_transport_sas.h> |
| 32 | #include "../scsi_sas_internal.h" |
| 33 | |
| 34 | static int sas_discover_expander(struct domain_device *dev); |
| 35 | static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr); |
| 36 | static int sas_configure_phy(struct domain_device *dev, int phy_id, |
| 37 | u8 *sas_addr, int include); |
| 38 | static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr); |
| 39 | |
| 40 | #if 0 |
| 41 | /* FIXME: smp needs to migrate into the sas class */ |
| 42 | static ssize_t smp_portal_read(struct kobject *, char *, loff_t, size_t); |
| 43 | static ssize_t smp_portal_write(struct kobject *, char *, loff_t, size_t); |
| 44 | #endif |
| 45 | |
| 46 | /* ---------- SMP task management ---------- */ |
| 47 | |
| 48 | static void smp_task_timedout(unsigned long _task) |
| 49 | { |
| 50 | struct sas_task *task = (void *) _task; |
| 51 | unsigned long flags; |
| 52 | |
| 53 | spin_lock_irqsave(&task->task_state_lock, flags); |
| 54 | if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) |
| 55 | task->task_state_flags |= SAS_TASK_STATE_ABORTED; |
| 56 | spin_unlock_irqrestore(&task->task_state_lock, flags); |
| 57 | |
| 58 | complete(&task->completion); |
| 59 | } |
| 60 | |
| 61 | static void smp_task_done(struct sas_task *task) |
| 62 | { |
| 63 | if (!del_timer(&task->timer)) |
| 64 | return; |
| 65 | complete(&task->completion); |
| 66 | } |
| 67 | |
| 68 | /* Give it some long enough timeout. In seconds. */ |
| 69 | #define SMP_TIMEOUT 10 |
| 70 | |
| 71 | static int smp_execute_task(struct domain_device *dev, void *req, int req_size, |
| 72 | void *resp, int resp_size) |
| 73 | { |
malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 74 | int res, retry; |
| 75 | struct sas_task *task = NULL; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 76 | struct sas_internal *i = |
| 77 | to_sas_internal(dev->port->ha->core.shost->transportt); |
| 78 | |
malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 79 | for (retry = 0; retry < 3; retry++) { |
| 80 | task = sas_alloc_task(GFP_KERNEL); |
| 81 | if (!task) |
| 82 | return -ENOMEM; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 83 | |
malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 84 | task->dev = dev; |
| 85 | task->task_proto = dev->tproto; |
| 86 | sg_init_one(&task->smp_task.smp_req, req, req_size); |
| 87 | sg_init_one(&task->smp_task.smp_resp, resp, resp_size); |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 88 | |
malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 89 | task->task_done = smp_task_done; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 90 | |
malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 91 | task->timer.data = (unsigned long) task; |
| 92 | task->timer.function = smp_task_timedout; |
| 93 | task->timer.expires = jiffies + SMP_TIMEOUT*HZ; |
| 94 | add_timer(&task->timer); |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 95 | |
malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 96 | res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL); |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 97 | |
malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 98 | if (res) { |
| 99 | del_timer(&task->timer); |
| 100 | SAS_DPRINTK("executing SMP task failed:%d\n", res); |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 101 | goto ex_err; |
| 102 | } |
malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 103 | |
| 104 | wait_for_completion(&task->completion); |
| 105 | res = -ETASK; |
| 106 | if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { |
| 107 | SAS_DPRINTK("smp task timed out or aborted\n"); |
| 108 | i->dft->lldd_abort_task(task); |
| 109 | if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { |
| 110 | SAS_DPRINTK("SMP task aborted and not done\n"); |
| 111 | goto ex_err; |
| 112 | } |
| 113 | } |
| 114 | if (task->task_status.resp == SAS_TASK_COMPLETE && |
| 115 | task->task_status.stat == SAM_GOOD) { |
| 116 | res = 0; |
| 117 | break; |
| 118 | } else { |
| 119 | SAS_DPRINTK("%s: task to dev %016llx response: 0x%x " |
| 120 | "status 0x%x\n", __FUNCTION__, |
| 121 | SAS_ADDR(dev->sas_addr), |
| 122 | task->task_status.resp, |
| 123 | task->task_status.stat); |
| 124 | sas_free_task(task); |
| 125 | task = NULL; |
| 126 | } |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 127 | } |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 128 | ex_err: |
malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 129 | BUG_ON(retry == 3 && task != NULL); |
| 130 | if (task != NULL) { |
| 131 | sas_free_task(task); |
| 132 | } |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 133 | return res; |
| 134 | } |
| 135 | |
| 136 | /* ---------- Allocations ---------- */ |
| 137 | |
| 138 | static inline void *alloc_smp_req(int size) |
| 139 | { |
| 140 | u8 *p = kzalloc(size, GFP_KERNEL); |
| 141 | if (p) |
| 142 | p[0] = SMP_REQUEST; |
| 143 | return p; |
| 144 | } |
| 145 | |
| 146 | static inline void *alloc_smp_resp(int size) |
| 147 | { |
| 148 | return kzalloc(size, GFP_KERNEL); |
| 149 | } |
| 150 | |
| 151 | /* ---------- Expander configuration ---------- */ |
| 152 | |
| 153 | static void sas_set_ex_phy(struct domain_device *dev, int phy_id, |
| 154 | void *disc_resp) |
| 155 | { |
| 156 | struct expander_device *ex = &dev->ex_dev; |
| 157 | struct ex_phy *phy = &ex->ex_phy[phy_id]; |
| 158 | struct smp_resp *resp = disc_resp; |
| 159 | struct discover_resp *dr = &resp->disc; |
| 160 | struct sas_rphy *rphy = dev->rphy; |
| 161 | int rediscover = (phy->phy != NULL); |
| 162 | |
| 163 | if (!rediscover) { |
| 164 | phy->phy = sas_phy_alloc(&rphy->dev, phy_id); |
| 165 | |
| 166 | /* FIXME: error_handling */ |
| 167 | BUG_ON(!phy->phy); |
| 168 | } |
| 169 | |
| 170 | switch (resp->result) { |
| 171 | case SMP_RESP_PHY_VACANT: |
| 172 | phy->phy_state = PHY_VACANT; |
| 173 | return; |
| 174 | default: |
| 175 | phy->phy_state = PHY_NOT_PRESENT; |
| 176 | return; |
| 177 | case SMP_RESP_FUNC_ACC: |
| 178 | phy->phy_state = PHY_EMPTY; /* do not know yet */ |
| 179 | break; |
| 180 | } |
| 181 | |
| 182 | phy->phy_id = phy_id; |
| 183 | phy->attached_dev_type = dr->attached_dev_type; |
| 184 | phy->linkrate = dr->linkrate; |
| 185 | phy->attached_sata_host = dr->attached_sata_host; |
| 186 | phy->attached_sata_dev = dr->attached_sata_dev; |
| 187 | phy->attached_sata_ps = dr->attached_sata_ps; |
| 188 | phy->attached_iproto = dr->iproto << 1; |
| 189 | phy->attached_tproto = dr->tproto << 1; |
| 190 | memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); |
| 191 | phy->attached_phy_id = dr->attached_phy_id; |
| 192 | phy->phy_change_count = dr->change_count; |
| 193 | phy->routing_attr = dr->routing_attr; |
| 194 | phy->virtual = dr->virtual; |
| 195 | phy->last_da_index = -1; |
| 196 | |
| 197 | phy->phy->identify.initiator_port_protocols = phy->attached_iproto; |
| 198 | phy->phy->identify.target_port_protocols = phy->attached_tproto; |
| 199 | phy->phy->identify.phy_identifier = phy_id; |
James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 200 | phy->phy->minimum_linkrate_hw = dr->hmin_linkrate; |
| 201 | phy->phy->maximum_linkrate_hw = dr->hmax_linkrate; |
| 202 | phy->phy->minimum_linkrate = dr->pmin_linkrate; |
| 203 | phy->phy->maximum_linkrate = dr->pmax_linkrate; |
James Bottomley | 88edf74 | 2006-09-06 17:36:13 -0500 | [diff] [blame] | 204 | phy->phy->negotiated_linkrate = phy->linkrate; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 205 | |
| 206 | if (!rediscover) |
| 207 | sas_phy_add(phy->phy); |
| 208 | |
| 209 | SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n", |
| 210 | SAS_ADDR(dev->sas_addr), phy->phy_id, |
| 211 | phy->routing_attr == TABLE_ROUTING ? 'T' : |
| 212 | phy->routing_attr == DIRECT_ROUTING ? 'D' : |
| 213 | phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?', |
| 214 | SAS_ADDR(phy->attached_sas_addr)); |
| 215 | |
| 216 | return; |
| 217 | } |
| 218 | |
| 219 | #define DISCOVER_REQ_SIZE 16 |
| 220 | #define DISCOVER_RESP_SIZE 56 |
| 221 | |
| 222 | static int sas_ex_phy_discover(struct domain_device *dev, int single) |
| 223 | { |
| 224 | struct expander_device *ex = &dev->ex_dev; |
| 225 | int res = 0; |
| 226 | u8 *disc_req; |
| 227 | u8 *disc_resp; |
| 228 | |
| 229 | disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); |
| 230 | if (!disc_req) |
| 231 | return -ENOMEM; |
| 232 | |
| 233 | disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE); |
| 234 | if (!disc_resp) { |
| 235 | kfree(disc_req); |
| 236 | return -ENOMEM; |
| 237 | } |
| 238 | |
| 239 | disc_req[1] = SMP_DISCOVER; |
| 240 | |
| 241 | if (0 <= single && single < ex->num_phys) { |
| 242 | disc_req[9] = single; |
| 243 | res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, |
| 244 | disc_resp, DISCOVER_RESP_SIZE); |
| 245 | if (res) |
| 246 | goto out_err; |
| 247 | sas_set_ex_phy(dev, single, disc_resp); |
| 248 | } else { |
| 249 | int i; |
| 250 | |
| 251 | for (i = 0; i < ex->num_phys; i++) { |
| 252 | disc_req[9] = i; |
| 253 | res = smp_execute_task(dev, disc_req, |
| 254 | DISCOVER_REQ_SIZE, disc_resp, |
| 255 | DISCOVER_RESP_SIZE); |
| 256 | if (res) |
| 257 | goto out_err; |
| 258 | sas_set_ex_phy(dev, i, disc_resp); |
| 259 | } |
| 260 | } |
| 261 | out_err: |
| 262 | kfree(disc_resp); |
| 263 | kfree(disc_req); |
| 264 | return res; |
| 265 | } |
| 266 | |
| 267 | static int sas_expander_discover(struct domain_device *dev) |
| 268 | { |
| 269 | struct expander_device *ex = &dev->ex_dev; |
| 270 | int res = -ENOMEM; |
| 271 | |
| 272 | ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL); |
| 273 | if (!ex->ex_phy) |
| 274 | return -ENOMEM; |
| 275 | |
| 276 | res = sas_ex_phy_discover(dev, -1); |
| 277 | if (res) |
| 278 | goto out_err; |
| 279 | |
| 280 | return 0; |
| 281 | out_err: |
| 282 | kfree(ex->ex_phy); |
| 283 | ex->ex_phy = NULL; |
| 284 | return res; |
| 285 | } |
| 286 | |
| 287 | #define MAX_EXPANDER_PHYS 128 |
| 288 | |
| 289 | static void ex_assign_report_general(struct domain_device *dev, |
| 290 | struct smp_resp *resp) |
| 291 | { |
| 292 | struct report_general_resp *rg = &resp->rg; |
| 293 | |
| 294 | dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count); |
| 295 | dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes); |
| 296 | dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS); |
| 297 | dev->ex_dev.conf_route_table = rg->conf_route_table; |
| 298 | dev->ex_dev.configuring = rg->configuring; |
| 299 | memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8); |
| 300 | } |
| 301 | |
| 302 | #define RG_REQ_SIZE 8 |
| 303 | #define RG_RESP_SIZE 32 |
| 304 | |
| 305 | static int sas_ex_general(struct domain_device *dev) |
| 306 | { |
| 307 | u8 *rg_req; |
| 308 | struct smp_resp *rg_resp; |
| 309 | int res; |
| 310 | int i; |
| 311 | |
| 312 | rg_req = alloc_smp_req(RG_REQ_SIZE); |
| 313 | if (!rg_req) |
| 314 | return -ENOMEM; |
| 315 | |
| 316 | rg_resp = alloc_smp_resp(RG_RESP_SIZE); |
| 317 | if (!rg_resp) { |
| 318 | kfree(rg_req); |
| 319 | return -ENOMEM; |
| 320 | } |
| 321 | |
| 322 | rg_req[1] = SMP_REPORT_GENERAL; |
| 323 | |
| 324 | for (i = 0; i < 5; i++) { |
| 325 | res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, |
| 326 | RG_RESP_SIZE); |
| 327 | |
| 328 | if (res) { |
| 329 | SAS_DPRINTK("RG to ex %016llx failed:0x%x\n", |
| 330 | SAS_ADDR(dev->sas_addr), res); |
| 331 | goto out; |
| 332 | } else if (rg_resp->result != SMP_RESP_FUNC_ACC) { |
| 333 | SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n", |
| 334 | SAS_ADDR(dev->sas_addr), rg_resp->result); |
| 335 | res = rg_resp->result; |
| 336 | goto out; |
| 337 | } |
| 338 | |
| 339 | ex_assign_report_general(dev, rg_resp); |
| 340 | |
| 341 | if (dev->ex_dev.configuring) { |
| 342 | SAS_DPRINTK("RG: ex %llx self-configuring...\n", |
| 343 | SAS_ADDR(dev->sas_addr)); |
| 344 | schedule_timeout_interruptible(5*HZ); |
| 345 | } else |
| 346 | break; |
| 347 | } |
| 348 | out: |
| 349 | kfree(rg_req); |
| 350 | kfree(rg_resp); |
| 351 | return res; |
| 352 | } |
| 353 | |
| 354 | static void ex_assign_manuf_info(struct domain_device *dev, void |
| 355 | *_mi_resp) |
| 356 | { |
| 357 | u8 *mi_resp = _mi_resp; |
| 358 | struct sas_rphy *rphy = dev->rphy; |
| 359 | struct sas_expander_device *edev = rphy_to_expander_device(rphy); |
| 360 | |
| 361 | memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN); |
| 362 | memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN); |
| 363 | memcpy(edev->product_rev, mi_resp + 36, |
| 364 | SAS_EXPANDER_PRODUCT_REV_LEN); |
| 365 | |
| 366 | if (mi_resp[8] & 1) { |
| 367 | memcpy(edev->component_vendor_id, mi_resp + 40, |
| 368 | SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); |
| 369 | edev->component_id = mi_resp[48] << 8 | mi_resp[49]; |
| 370 | edev->component_revision_id = mi_resp[50]; |
| 371 | } |
| 372 | } |
| 373 | |
| 374 | #define MI_REQ_SIZE 8 |
| 375 | #define MI_RESP_SIZE 64 |
| 376 | |
| 377 | static int sas_ex_manuf_info(struct domain_device *dev) |
| 378 | { |
| 379 | u8 *mi_req; |
| 380 | u8 *mi_resp; |
| 381 | int res; |
| 382 | |
| 383 | mi_req = alloc_smp_req(MI_REQ_SIZE); |
| 384 | if (!mi_req) |
| 385 | return -ENOMEM; |
| 386 | |
| 387 | mi_resp = alloc_smp_resp(MI_RESP_SIZE); |
| 388 | if (!mi_resp) { |
| 389 | kfree(mi_req); |
| 390 | return -ENOMEM; |
| 391 | } |
| 392 | |
| 393 | mi_req[1] = SMP_REPORT_MANUF_INFO; |
| 394 | |
| 395 | res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE); |
| 396 | if (res) { |
| 397 | SAS_DPRINTK("MI: ex %016llx failed:0x%x\n", |
| 398 | SAS_ADDR(dev->sas_addr), res); |
| 399 | goto out; |
| 400 | } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) { |
| 401 | SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n", |
| 402 | SAS_ADDR(dev->sas_addr), mi_resp[2]); |
| 403 | goto out; |
| 404 | } |
| 405 | |
| 406 | ex_assign_manuf_info(dev, mi_resp); |
| 407 | out: |
| 408 | kfree(mi_req); |
| 409 | kfree(mi_resp); |
| 410 | return res; |
| 411 | } |
| 412 | |
| 413 | #define PC_REQ_SIZE 44 |
| 414 | #define PC_RESP_SIZE 8 |
| 415 | |
| 416 | int sas_smp_phy_control(struct domain_device *dev, int phy_id, |
James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 417 | enum phy_func phy_func, |
| 418 | struct sas_phy_linkrates *rates) |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 419 | { |
| 420 | u8 *pc_req; |
| 421 | u8 *pc_resp; |
| 422 | int res; |
| 423 | |
| 424 | pc_req = alloc_smp_req(PC_REQ_SIZE); |
| 425 | if (!pc_req) |
| 426 | return -ENOMEM; |
| 427 | |
| 428 | pc_resp = alloc_smp_resp(PC_RESP_SIZE); |
| 429 | if (!pc_resp) { |
| 430 | kfree(pc_req); |
| 431 | return -ENOMEM; |
| 432 | } |
| 433 | |
| 434 | pc_req[1] = SMP_PHY_CONTROL; |
| 435 | pc_req[9] = phy_id; |
| 436 | pc_req[10]= phy_func; |
James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 437 | if (rates) { |
| 438 | pc_req[32] = rates->minimum_linkrate << 4; |
| 439 | pc_req[33] = rates->maximum_linkrate << 4; |
| 440 | } |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 441 | |
| 442 | res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE); |
| 443 | |
| 444 | kfree(pc_resp); |
| 445 | kfree(pc_req); |
| 446 | return res; |
| 447 | } |
| 448 | |
| 449 | static void sas_ex_disable_phy(struct domain_device *dev, int phy_id) |
| 450 | { |
| 451 | struct expander_device *ex = &dev->ex_dev; |
| 452 | struct ex_phy *phy = &ex->ex_phy[phy_id]; |
| 453 | |
James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 454 | sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL); |
James Bottomley | 88edf74 | 2006-09-06 17:36:13 -0500 | [diff] [blame] | 455 | phy->linkrate = SAS_PHY_DISABLED; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 456 | } |
| 457 | |
| 458 | static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr) |
| 459 | { |
| 460 | struct expander_device *ex = &dev->ex_dev; |
| 461 | int i; |
| 462 | |
| 463 | for (i = 0; i < ex->num_phys; i++) { |
| 464 | struct ex_phy *phy = &ex->ex_phy[i]; |
| 465 | |
| 466 | if (phy->phy_state == PHY_VACANT || |
| 467 | phy->phy_state == PHY_NOT_PRESENT) |
| 468 | continue; |
| 469 | |
| 470 | if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr)) |
| 471 | sas_ex_disable_phy(dev, i); |
| 472 | } |
| 473 | } |
| 474 | |
| 475 | static int sas_dev_present_in_domain(struct asd_sas_port *port, |
| 476 | u8 *sas_addr) |
| 477 | { |
| 478 | struct domain_device *dev; |
| 479 | |
| 480 | if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr)) |
| 481 | return 1; |
| 482 | list_for_each_entry(dev, &port->dev_list, dev_list_node) { |
| 483 | if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr)) |
| 484 | return 1; |
| 485 | } |
| 486 | return 0; |
| 487 | } |
| 488 | |
| 489 | #define RPEL_REQ_SIZE 16 |
| 490 | #define RPEL_RESP_SIZE 32 |
| 491 | int sas_smp_get_phy_events(struct sas_phy *phy) |
| 492 | { |
| 493 | int res; |
| 494 | struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); |
| 495 | struct domain_device *dev = sas_find_dev_by_rphy(rphy); |
| 496 | u8 *req = alloc_smp_req(RPEL_REQ_SIZE); |
| 497 | u8 *resp = kzalloc(RPEL_RESP_SIZE, GFP_KERNEL); |
| 498 | |
| 499 | if (!resp) |
| 500 | return -ENOMEM; |
| 501 | |
| 502 | req[1] = SMP_REPORT_PHY_ERR_LOG; |
| 503 | req[9] = phy->number; |
| 504 | |
| 505 | res = smp_execute_task(dev, req, RPEL_REQ_SIZE, |
| 506 | resp, RPEL_RESP_SIZE); |
| 507 | |
| 508 | if (!res) |
| 509 | goto out; |
| 510 | |
| 511 | phy->invalid_dword_count = scsi_to_u32(&resp[12]); |
| 512 | phy->running_disparity_error_count = scsi_to_u32(&resp[16]); |
| 513 | phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]); |
| 514 | phy->phy_reset_problem_count = scsi_to_u32(&resp[24]); |
| 515 | |
| 516 | out: |
| 517 | kfree(resp); |
| 518 | return res; |
| 519 | |
| 520 | } |
| 521 | |
| 522 | #define RPS_REQ_SIZE 16 |
| 523 | #define RPS_RESP_SIZE 60 |
| 524 | |
| 525 | static int sas_get_report_phy_sata(struct domain_device *dev, |
| 526 | int phy_id, |
| 527 | struct smp_resp *rps_resp) |
| 528 | { |
| 529 | int res; |
| 530 | u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE); |
| 531 | |
| 532 | if (!rps_req) |
| 533 | return -ENOMEM; |
| 534 | |
| 535 | rps_req[1] = SMP_REPORT_PHY_SATA; |
| 536 | rps_req[9] = phy_id; |
| 537 | |
| 538 | res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE, |
| 539 | rps_resp, RPS_RESP_SIZE); |
| 540 | |
| 541 | kfree(rps_req); |
| 542 | return 0; |
| 543 | } |
| 544 | |
| 545 | static void sas_ex_get_linkrate(struct domain_device *parent, |
| 546 | struct domain_device *child, |
| 547 | struct ex_phy *parent_phy) |
| 548 | { |
| 549 | struct expander_device *parent_ex = &parent->ex_dev; |
| 550 | struct sas_port *port; |
| 551 | int i; |
| 552 | |
| 553 | child->pathways = 0; |
| 554 | |
| 555 | port = parent_phy->port; |
| 556 | |
| 557 | for (i = 0; i < parent_ex->num_phys; i++) { |
| 558 | struct ex_phy *phy = &parent_ex->ex_phy[i]; |
| 559 | |
| 560 | if (phy->phy_state == PHY_VACANT || |
| 561 | phy->phy_state == PHY_NOT_PRESENT) |
| 562 | continue; |
| 563 | |
| 564 | if (SAS_ADDR(phy->attached_sas_addr) == |
| 565 | SAS_ADDR(child->sas_addr)) { |
| 566 | |
| 567 | child->min_linkrate = min(parent->min_linkrate, |
| 568 | phy->linkrate); |
| 569 | child->max_linkrate = max(parent->max_linkrate, |
| 570 | phy->linkrate); |
| 571 | child->pathways++; |
| 572 | sas_port_add_phy(port, phy->phy); |
| 573 | } |
| 574 | } |
| 575 | child->linkrate = min(parent_phy->linkrate, child->max_linkrate); |
| 576 | child->pathways = min(child->pathways, parent->pathways); |
| 577 | } |
| 578 | |
| 579 | static struct domain_device *sas_ex_discover_end_dev( |
| 580 | struct domain_device *parent, int phy_id) |
| 581 | { |
| 582 | struct expander_device *parent_ex = &parent->ex_dev; |
| 583 | struct ex_phy *phy = &parent_ex->ex_phy[phy_id]; |
| 584 | struct domain_device *child = NULL; |
| 585 | struct sas_rphy *rphy; |
| 586 | int res; |
| 587 | |
| 588 | if (phy->attached_sata_host || phy->attached_sata_ps) |
| 589 | return NULL; |
| 590 | |
| 591 | child = kzalloc(sizeof(*child), GFP_KERNEL); |
| 592 | if (!child) |
| 593 | return NULL; |
| 594 | |
| 595 | child->parent = parent; |
| 596 | child->port = parent->port; |
| 597 | child->iproto = phy->attached_iproto; |
| 598 | memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); |
| 599 | sas_hash_addr(child->hashed_sas_addr, child->sas_addr); |
James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame^] | 600 | if (!phy->port) { |
| 601 | phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); |
| 602 | if (unlikely(!phy->port)) |
| 603 | goto out_err; |
| 604 | if (unlikely(sas_port_add(phy->port) != 0)) { |
| 605 | sas_port_free(phy->port); |
| 606 | goto out_err; |
| 607 | } |
| 608 | } |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 609 | sas_ex_get_linkrate(parent, child, phy); |
| 610 | |
| 611 | if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) { |
| 612 | child->dev_type = SATA_DEV; |
| 613 | if (phy->attached_tproto & SAS_PROTO_STP) |
| 614 | child->tproto = phy->attached_tproto; |
| 615 | if (phy->attached_sata_dev) |
| 616 | child->tproto |= SATA_DEV; |
| 617 | res = sas_get_report_phy_sata(parent, phy_id, |
| 618 | &child->sata_dev.rps_resp); |
| 619 | if (res) { |
| 620 | SAS_DPRINTK("report phy sata to %016llx:0x%x returned " |
| 621 | "0x%x\n", SAS_ADDR(parent->sas_addr), |
| 622 | phy_id, res); |
James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame^] | 623 | goto out_free; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 624 | } |
| 625 | memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis, |
| 626 | sizeof(struct dev_to_host_fis)); |
| 627 | sas_init_dev(child); |
| 628 | res = sas_discover_sata(child); |
| 629 | if (res) { |
| 630 | SAS_DPRINTK("sas_discover_sata() for device %16llx at " |
| 631 | "%016llx:0x%x returned 0x%x\n", |
| 632 | SAS_ADDR(child->sas_addr), |
| 633 | SAS_ADDR(parent->sas_addr), phy_id, res); |
James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame^] | 634 | goto out_free; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 635 | } |
| 636 | } else if (phy->attached_tproto & SAS_PROTO_SSP) { |
| 637 | child->dev_type = SAS_END_DEV; |
| 638 | rphy = sas_end_device_alloc(phy->port); |
| 639 | /* FIXME: error handling */ |
James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame^] | 640 | if (unlikely(!rphy)) |
| 641 | goto out_free; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 642 | child->tproto = phy->attached_tproto; |
| 643 | sas_init_dev(child); |
| 644 | |
| 645 | child->rphy = rphy; |
| 646 | sas_fill_in_rphy(child, rphy); |
| 647 | |
| 648 | spin_lock(&parent->port->dev_list_lock); |
| 649 | list_add_tail(&child->dev_list_node, &parent->port->dev_list); |
| 650 | spin_unlock(&parent->port->dev_list_lock); |
| 651 | |
| 652 | res = sas_discover_end_dev(child); |
| 653 | if (res) { |
| 654 | SAS_DPRINTK("sas_discover_end_dev() for device %16llx " |
| 655 | "at %016llx:0x%x returned 0x%x\n", |
| 656 | SAS_ADDR(child->sas_addr), |
| 657 | SAS_ADDR(parent->sas_addr), phy_id, res); |
James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame^] | 658 | goto out_list_del; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 659 | } |
| 660 | } else { |
| 661 | SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n", |
| 662 | phy->attached_tproto, SAS_ADDR(parent->sas_addr), |
| 663 | phy_id); |
| 664 | } |
| 665 | |
| 666 | list_add_tail(&child->siblings, &parent_ex->children); |
| 667 | return child; |
James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame^] | 668 | |
| 669 | out_list_del: |
| 670 | list_del(&child->dev_list_node); |
| 671 | sas_rphy_free(rphy); |
| 672 | out_free: |
| 673 | sas_port_delete(phy->port); |
| 674 | out_err: |
| 675 | phy->port = NULL; |
| 676 | kfree(child); |
| 677 | return NULL; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 678 | } |
| 679 | |
| 680 | static struct domain_device *sas_ex_discover_expander( |
| 681 | struct domain_device *parent, int phy_id) |
| 682 | { |
| 683 | struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy); |
| 684 | struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id]; |
| 685 | struct domain_device *child = NULL; |
| 686 | struct sas_rphy *rphy; |
| 687 | struct sas_expander_device *edev; |
| 688 | struct asd_sas_port *port; |
| 689 | int res; |
| 690 | |
| 691 | if (phy->routing_attr == DIRECT_ROUTING) { |
| 692 | SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not " |
| 693 | "allowed\n", |
| 694 | SAS_ADDR(parent->sas_addr), phy_id, |
| 695 | SAS_ADDR(phy->attached_sas_addr), |
| 696 | phy->attached_phy_id); |
| 697 | return NULL; |
| 698 | } |
| 699 | child = kzalloc(sizeof(*child), GFP_KERNEL); |
| 700 | if (!child) |
| 701 | return NULL; |
| 702 | |
| 703 | phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); |
| 704 | /* FIXME: better error handling */ |
| 705 | BUG_ON(sas_port_add(phy->port) != 0); |
| 706 | |
| 707 | |
| 708 | switch (phy->attached_dev_type) { |
| 709 | case EDGE_DEV: |
| 710 | rphy = sas_expander_alloc(phy->port, |
| 711 | SAS_EDGE_EXPANDER_DEVICE); |
| 712 | break; |
| 713 | case FANOUT_DEV: |
| 714 | rphy = sas_expander_alloc(phy->port, |
| 715 | SAS_FANOUT_EXPANDER_DEVICE); |
| 716 | break; |
| 717 | default: |
| 718 | rphy = NULL; /* shut gcc up */ |
| 719 | BUG(); |
| 720 | } |
| 721 | port = parent->port; |
| 722 | child->rphy = rphy; |
| 723 | edev = rphy_to_expander_device(rphy); |
| 724 | child->dev_type = phy->attached_dev_type; |
| 725 | child->parent = parent; |
| 726 | child->port = port; |
| 727 | child->iproto = phy->attached_iproto; |
| 728 | child->tproto = phy->attached_tproto; |
| 729 | memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); |
| 730 | sas_hash_addr(child->hashed_sas_addr, child->sas_addr); |
| 731 | sas_ex_get_linkrate(parent, child, phy); |
| 732 | edev->level = parent_ex->level + 1; |
| 733 | parent->port->disc.max_level = max(parent->port->disc.max_level, |
| 734 | edev->level); |
| 735 | sas_init_dev(child); |
| 736 | sas_fill_in_rphy(child, rphy); |
| 737 | sas_rphy_add(rphy); |
| 738 | |
| 739 | spin_lock(&parent->port->dev_list_lock); |
| 740 | list_add_tail(&child->dev_list_node, &parent->port->dev_list); |
| 741 | spin_unlock(&parent->port->dev_list_lock); |
| 742 | |
| 743 | res = sas_discover_expander(child); |
| 744 | if (res) { |
| 745 | kfree(child); |
| 746 | return NULL; |
| 747 | } |
| 748 | list_add_tail(&child->siblings, &parent->ex_dev.children); |
| 749 | return child; |
| 750 | } |
| 751 | |
| 752 | static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) |
| 753 | { |
| 754 | struct expander_device *ex = &dev->ex_dev; |
| 755 | struct ex_phy *ex_phy = &ex->ex_phy[phy_id]; |
| 756 | struct domain_device *child = NULL; |
| 757 | int res = 0; |
| 758 | |
| 759 | /* Phy state */ |
James Bottomley | 88edf74 | 2006-09-06 17:36:13 -0500 | [diff] [blame] | 760 | if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) { |
James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 761 | if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL)) |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 762 | res = sas_ex_phy_discover(dev, phy_id); |
| 763 | if (res) |
| 764 | return res; |
| 765 | } |
| 766 | |
| 767 | /* Parent and domain coherency */ |
| 768 | if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == |
| 769 | SAS_ADDR(dev->port->sas_addr))) { |
| 770 | sas_add_parent_port(dev, phy_id); |
| 771 | return 0; |
| 772 | } |
| 773 | if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == |
| 774 | SAS_ADDR(dev->parent->sas_addr))) { |
| 775 | sas_add_parent_port(dev, phy_id); |
| 776 | if (ex_phy->routing_attr == TABLE_ROUTING) |
| 777 | sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1); |
| 778 | return 0; |
| 779 | } |
| 780 | |
| 781 | if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr)) |
| 782 | sas_ex_disable_port(dev, ex_phy->attached_sas_addr); |
| 783 | |
| 784 | if (ex_phy->attached_dev_type == NO_DEVICE) { |
| 785 | if (ex_phy->routing_attr == DIRECT_ROUTING) { |
| 786 | memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE); |
| 787 | sas_configure_routing(dev, ex_phy->attached_sas_addr); |
| 788 | } |
| 789 | return 0; |
James Bottomley | 88edf74 | 2006-09-06 17:36:13 -0500 | [diff] [blame] | 790 | } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN) |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 791 | return 0; |
| 792 | |
| 793 | if (ex_phy->attached_dev_type != SAS_END_DEV && |
| 794 | ex_phy->attached_dev_type != FANOUT_DEV && |
| 795 | ex_phy->attached_dev_type != EDGE_DEV) { |
| 796 | SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx " |
| 797 | "phy 0x%x\n", ex_phy->attached_dev_type, |
| 798 | SAS_ADDR(dev->sas_addr), |
| 799 | phy_id); |
| 800 | return 0; |
| 801 | } |
| 802 | |
| 803 | res = sas_configure_routing(dev, ex_phy->attached_sas_addr); |
| 804 | if (res) { |
| 805 | SAS_DPRINTK("configure routing for dev %016llx " |
| 806 | "reported 0x%x. Forgotten\n", |
| 807 | SAS_ADDR(ex_phy->attached_sas_addr), res); |
| 808 | sas_disable_routing(dev, ex_phy->attached_sas_addr); |
| 809 | return res; |
| 810 | } |
| 811 | |
| 812 | switch (ex_phy->attached_dev_type) { |
| 813 | case SAS_END_DEV: |
| 814 | child = sas_ex_discover_end_dev(dev, phy_id); |
| 815 | break; |
| 816 | case FANOUT_DEV: |
| 817 | if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) { |
| 818 | SAS_DPRINTK("second fanout expander %016llx phy 0x%x " |
| 819 | "attached to ex %016llx phy 0x%x\n", |
| 820 | SAS_ADDR(ex_phy->attached_sas_addr), |
| 821 | ex_phy->attached_phy_id, |
| 822 | SAS_ADDR(dev->sas_addr), |
| 823 | phy_id); |
| 824 | sas_ex_disable_phy(dev, phy_id); |
| 825 | break; |
| 826 | } else |
| 827 | memcpy(dev->port->disc.fanout_sas_addr, |
| 828 | ex_phy->attached_sas_addr, SAS_ADDR_SIZE); |
| 829 | /* fallthrough */ |
| 830 | case EDGE_DEV: |
| 831 | child = sas_ex_discover_expander(dev, phy_id); |
| 832 | break; |
| 833 | default: |
| 834 | break; |
| 835 | } |
| 836 | |
| 837 | if (child) { |
| 838 | int i; |
| 839 | |
| 840 | for (i = 0; i < ex->num_phys; i++) { |
| 841 | if (ex->ex_phy[i].phy_state == PHY_VACANT || |
| 842 | ex->ex_phy[i].phy_state == PHY_NOT_PRESENT) |
| 843 | continue; |
| 844 | |
| 845 | if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) == |
| 846 | SAS_ADDR(child->sas_addr)) |
| 847 | ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED; |
| 848 | } |
| 849 | } |
| 850 | |
| 851 | return res; |
| 852 | } |
| 853 | |
| 854 | static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr) |
| 855 | { |
| 856 | struct expander_device *ex = &dev->ex_dev; |
| 857 | int i; |
| 858 | |
| 859 | for (i = 0; i < ex->num_phys; i++) { |
| 860 | struct ex_phy *phy = &ex->ex_phy[i]; |
| 861 | |
| 862 | if (phy->phy_state == PHY_VACANT || |
| 863 | phy->phy_state == PHY_NOT_PRESENT) |
| 864 | continue; |
| 865 | |
| 866 | if ((phy->attached_dev_type == EDGE_DEV || |
| 867 | phy->attached_dev_type == FANOUT_DEV) && |
| 868 | phy->routing_attr == SUBTRACTIVE_ROUTING) { |
| 869 | |
| 870 | memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE); |
| 871 | |
| 872 | return 1; |
| 873 | } |
| 874 | } |
| 875 | return 0; |
| 876 | } |
| 877 | |
| 878 | static int sas_check_level_subtractive_boundary(struct domain_device *dev) |
| 879 | { |
| 880 | struct expander_device *ex = &dev->ex_dev; |
| 881 | struct domain_device *child; |
| 882 | u8 sub_addr[8] = {0, }; |
| 883 | |
| 884 | list_for_each_entry(child, &ex->children, siblings) { |
| 885 | if (child->dev_type != EDGE_DEV && |
| 886 | child->dev_type != FANOUT_DEV) |
| 887 | continue; |
| 888 | if (sub_addr[0] == 0) { |
| 889 | sas_find_sub_addr(child, sub_addr); |
| 890 | continue; |
| 891 | } else { |
| 892 | u8 s2[8]; |
| 893 | |
| 894 | if (sas_find_sub_addr(child, s2) && |
| 895 | (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) { |
| 896 | |
| 897 | SAS_DPRINTK("ex %016llx->%016llx-?->%016llx " |
| 898 | "diverges from subtractive " |
| 899 | "boundary %016llx\n", |
| 900 | SAS_ADDR(dev->sas_addr), |
| 901 | SAS_ADDR(child->sas_addr), |
| 902 | SAS_ADDR(s2), |
| 903 | SAS_ADDR(sub_addr)); |
| 904 | |
| 905 | sas_ex_disable_port(child, s2); |
| 906 | } |
| 907 | } |
| 908 | } |
| 909 | return 0; |
| 910 | } |
| 911 | /** |
| 912 | * sas_ex_discover_devices -- discover devices attached to this expander |
| 913 | * dev: pointer to the expander domain device |
| 914 | * single: if you want to do a single phy, else set to -1; |
| 915 | * |
| 916 | * Configure this expander for use with its devices and register the |
| 917 | * devices of this expander. |
| 918 | */ |
| 919 | static int sas_ex_discover_devices(struct domain_device *dev, int single) |
| 920 | { |
| 921 | struct expander_device *ex = &dev->ex_dev; |
| 922 | int i = 0, end = ex->num_phys; |
| 923 | int res = 0; |
| 924 | |
| 925 | if (0 <= single && single < end) { |
| 926 | i = single; |
| 927 | end = i+1; |
| 928 | } |
| 929 | |
| 930 | for ( ; i < end; i++) { |
| 931 | struct ex_phy *ex_phy = &ex->ex_phy[i]; |
| 932 | |
| 933 | if (ex_phy->phy_state == PHY_VACANT || |
| 934 | ex_phy->phy_state == PHY_NOT_PRESENT || |
| 935 | ex_phy->phy_state == PHY_DEVICE_DISCOVERED) |
| 936 | continue; |
| 937 | |
| 938 | switch (ex_phy->linkrate) { |
James Bottomley | 88edf74 | 2006-09-06 17:36:13 -0500 | [diff] [blame] | 939 | case SAS_PHY_DISABLED: |
| 940 | case SAS_PHY_RESET_PROBLEM: |
| 941 | case SAS_SATA_PORT_SELECTOR: |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 942 | continue; |
| 943 | default: |
| 944 | res = sas_ex_discover_dev(dev, i); |
| 945 | if (res) |
| 946 | break; |
| 947 | continue; |
| 948 | } |
| 949 | } |
| 950 | |
| 951 | if (!res) |
| 952 | sas_check_level_subtractive_boundary(dev); |
| 953 | |
| 954 | return res; |
| 955 | } |
| 956 | |
| 957 | static int sas_check_ex_subtractive_boundary(struct domain_device *dev) |
| 958 | { |
| 959 | struct expander_device *ex = &dev->ex_dev; |
| 960 | int i; |
| 961 | u8 *sub_sas_addr = NULL; |
| 962 | |
| 963 | if (dev->dev_type != EDGE_DEV) |
| 964 | return 0; |
| 965 | |
| 966 | for (i = 0; i < ex->num_phys; i++) { |
| 967 | struct ex_phy *phy = &ex->ex_phy[i]; |
| 968 | |
| 969 | if (phy->phy_state == PHY_VACANT || |
| 970 | phy->phy_state == PHY_NOT_PRESENT) |
| 971 | continue; |
| 972 | |
| 973 | if ((phy->attached_dev_type == FANOUT_DEV || |
| 974 | phy->attached_dev_type == EDGE_DEV) && |
| 975 | phy->routing_attr == SUBTRACTIVE_ROUTING) { |
| 976 | |
| 977 | if (!sub_sas_addr) |
| 978 | sub_sas_addr = &phy->attached_sas_addr[0]; |
| 979 | else if (SAS_ADDR(sub_sas_addr) != |
| 980 | SAS_ADDR(phy->attached_sas_addr)) { |
| 981 | |
| 982 | SAS_DPRINTK("ex %016llx phy 0x%x " |
| 983 | "diverges(%016llx) on subtractive " |
| 984 | "boundary(%016llx). Disabled\n", |
| 985 | SAS_ADDR(dev->sas_addr), i, |
| 986 | SAS_ADDR(phy->attached_sas_addr), |
| 987 | SAS_ADDR(sub_sas_addr)); |
| 988 | sas_ex_disable_phy(dev, i); |
| 989 | } |
| 990 | } |
| 991 | } |
| 992 | return 0; |
| 993 | } |
| 994 | |
| 995 | static void sas_print_parent_topology_bug(struct domain_device *child, |
| 996 | struct ex_phy *parent_phy, |
| 997 | struct ex_phy *child_phy) |
| 998 | { |
| 999 | static const char ra_char[] = { |
| 1000 | [DIRECT_ROUTING] = 'D', |
| 1001 | [SUBTRACTIVE_ROUTING] = 'S', |
| 1002 | [TABLE_ROUTING] = 'T', |
| 1003 | }; |
| 1004 | static const char *ex_type[] = { |
| 1005 | [EDGE_DEV] = "edge", |
| 1006 | [FANOUT_DEV] = "fanout", |
| 1007 | }; |
| 1008 | struct domain_device *parent = child->parent; |
| 1009 | |
| 1010 | sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x " |
| 1011 | "has %c:%c routing link!\n", |
| 1012 | |
| 1013 | ex_type[parent->dev_type], |
| 1014 | SAS_ADDR(parent->sas_addr), |
| 1015 | parent_phy->phy_id, |
| 1016 | |
| 1017 | ex_type[child->dev_type], |
| 1018 | SAS_ADDR(child->sas_addr), |
| 1019 | child_phy->phy_id, |
| 1020 | |
| 1021 | ra_char[parent_phy->routing_attr], |
| 1022 | ra_char[child_phy->routing_attr]); |
| 1023 | } |
| 1024 | |
| 1025 | static int sas_check_eeds(struct domain_device *child, |
| 1026 | struct ex_phy *parent_phy, |
| 1027 | struct ex_phy *child_phy) |
| 1028 | { |
| 1029 | int res = 0; |
| 1030 | struct domain_device *parent = child->parent; |
| 1031 | |
| 1032 | if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) { |
| 1033 | res = -ENODEV; |
| 1034 | SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx " |
| 1035 | "phy S:0x%x, while there is a fanout ex %016llx\n", |
| 1036 | SAS_ADDR(parent->sas_addr), |
| 1037 | parent_phy->phy_id, |
| 1038 | SAS_ADDR(child->sas_addr), |
| 1039 | child_phy->phy_id, |
| 1040 | SAS_ADDR(parent->port->disc.fanout_sas_addr)); |
| 1041 | } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) { |
| 1042 | memcpy(parent->port->disc.eeds_a, parent->sas_addr, |
| 1043 | SAS_ADDR_SIZE); |
| 1044 | memcpy(parent->port->disc.eeds_b, child->sas_addr, |
| 1045 | SAS_ADDR_SIZE); |
| 1046 | } else if (((SAS_ADDR(parent->port->disc.eeds_a) == |
| 1047 | SAS_ADDR(parent->sas_addr)) || |
| 1048 | (SAS_ADDR(parent->port->disc.eeds_a) == |
| 1049 | SAS_ADDR(child->sas_addr))) |
| 1050 | && |
| 1051 | ((SAS_ADDR(parent->port->disc.eeds_b) == |
| 1052 | SAS_ADDR(parent->sas_addr)) || |
| 1053 | (SAS_ADDR(parent->port->disc.eeds_b) == |
| 1054 | SAS_ADDR(child->sas_addr)))) |
| 1055 | ; |
| 1056 | else { |
| 1057 | res = -ENODEV; |
| 1058 | SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx " |
| 1059 | "phy 0x%x link forms a third EEDS!\n", |
| 1060 | SAS_ADDR(parent->sas_addr), |
| 1061 | parent_phy->phy_id, |
| 1062 | SAS_ADDR(child->sas_addr), |
| 1063 | child_phy->phy_id); |
| 1064 | } |
| 1065 | |
| 1066 | return res; |
| 1067 | } |
| 1068 | |
| 1069 | /* Here we spill over 80 columns. It is intentional. |
| 1070 | */ |
| 1071 | static int sas_check_parent_topology(struct domain_device *child) |
| 1072 | { |
| 1073 | struct expander_device *child_ex = &child->ex_dev; |
| 1074 | struct expander_device *parent_ex; |
| 1075 | int i; |
| 1076 | int res = 0; |
| 1077 | |
| 1078 | if (!child->parent) |
| 1079 | return 0; |
| 1080 | |
| 1081 | if (child->parent->dev_type != EDGE_DEV && |
| 1082 | child->parent->dev_type != FANOUT_DEV) |
| 1083 | return 0; |
| 1084 | |
| 1085 | parent_ex = &child->parent->ex_dev; |
| 1086 | |
| 1087 | for (i = 0; i < parent_ex->num_phys; i++) { |
| 1088 | struct ex_phy *parent_phy = &parent_ex->ex_phy[i]; |
| 1089 | struct ex_phy *child_phy; |
| 1090 | |
| 1091 | if (parent_phy->phy_state == PHY_VACANT || |
| 1092 | parent_phy->phy_state == PHY_NOT_PRESENT) |
| 1093 | continue; |
| 1094 | |
| 1095 | if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr)) |
| 1096 | continue; |
| 1097 | |
| 1098 | child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id]; |
| 1099 | |
| 1100 | switch (child->parent->dev_type) { |
| 1101 | case EDGE_DEV: |
| 1102 | if (child->dev_type == FANOUT_DEV) { |
| 1103 | if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING || |
| 1104 | child_phy->routing_attr != TABLE_ROUTING) { |
| 1105 | sas_print_parent_topology_bug(child, parent_phy, child_phy); |
| 1106 | res = -ENODEV; |
| 1107 | } |
| 1108 | } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) { |
| 1109 | if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) { |
| 1110 | res = sas_check_eeds(child, parent_phy, child_phy); |
| 1111 | } else if (child_phy->routing_attr != TABLE_ROUTING) { |
| 1112 | sas_print_parent_topology_bug(child, parent_phy, child_phy); |
| 1113 | res = -ENODEV; |
| 1114 | } |
| 1115 | } else if (parent_phy->routing_attr == TABLE_ROUTING && |
| 1116 | child_phy->routing_attr != SUBTRACTIVE_ROUTING) { |
| 1117 | sas_print_parent_topology_bug(child, parent_phy, child_phy); |
| 1118 | res = -ENODEV; |
| 1119 | } |
| 1120 | break; |
| 1121 | case FANOUT_DEV: |
| 1122 | if (parent_phy->routing_attr != TABLE_ROUTING || |
| 1123 | child_phy->routing_attr != SUBTRACTIVE_ROUTING) { |
| 1124 | sas_print_parent_topology_bug(child, parent_phy, child_phy); |
| 1125 | res = -ENODEV; |
| 1126 | } |
| 1127 | break; |
| 1128 | default: |
| 1129 | break; |
| 1130 | } |
| 1131 | } |
| 1132 | |
| 1133 | return res; |
| 1134 | } |
| 1135 | |
| 1136 | #define RRI_REQ_SIZE 16 |
| 1137 | #define RRI_RESP_SIZE 44 |
| 1138 | |
| 1139 | static int sas_configure_present(struct domain_device *dev, int phy_id, |
| 1140 | u8 *sas_addr, int *index, int *present) |
| 1141 | { |
| 1142 | int i, res = 0; |
| 1143 | struct expander_device *ex = &dev->ex_dev; |
| 1144 | struct ex_phy *phy = &ex->ex_phy[phy_id]; |
| 1145 | u8 *rri_req; |
| 1146 | u8 *rri_resp; |
| 1147 | |
| 1148 | *present = 0; |
| 1149 | *index = 0; |
| 1150 | |
| 1151 | rri_req = alloc_smp_req(RRI_REQ_SIZE); |
| 1152 | if (!rri_req) |
| 1153 | return -ENOMEM; |
| 1154 | |
| 1155 | rri_resp = alloc_smp_resp(RRI_RESP_SIZE); |
| 1156 | if (!rri_resp) { |
| 1157 | kfree(rri_req); |
| 1158 | return -ENOMEM; |
| 1159 | } |
| 1160 | |
| 1161 | rri_req[1] = SMP_REPORT_ROUTE_INFO; |
| 1162 | rri_req[9] = phy_id; |
| 1163 | |
| 1164 | for (i = 0; i < ex->max_route_indexes ; i++) { |
| 1165 | *(__be16 *)(rri_req+6) = cpu_to_be16(i); |
| 1166 | res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp, |
| 1167 | RRI_RESP_SIZE); |
| 1168 | if (res) |
| 1169 | goto out; |
| 1170 | res = rri_resp[2]; |
| 1171 | if (res == SMP_RESP_NO_INDEX) { |
| 1172 | SAS_DPRINTK("overflow of indexes: dev %016llx " |
| 1173 | "phy 0x%x index 0x%x\n", |
| 1174 | SAS_ADDR(dev->sas_addr), phy_id, i); |
| 1175 | goto out; |
| 1176 | } else if (res != SMP_RESP_FUNC_ACC) { |
| 1177 | SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x " |
| 1178 | "result 0x%x\n", __FUNCTION__, |
| 1179 | SAS_ADDR(dev->sas_addr), phy_id, i, res); |
| 1180 | goto out; |
| 1181 | } |
| 1182 | if (SAS_ADDR(sas_addr) != 0) { |
| 1183 | if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) { |
| 1184 | *index = i; |
| 1185 | if ((rri_resp[12] & 0x80) == 0x80) |
| 1186 | *present = 0; |
| 1187 | else |
| 1188 | *present = 1; |
| 1189 | goto out; |
| 1190 | } else if (SAS_ADDR(rri_resp+16) == 0) { |
| 1191 | *index = i; |
| 1192 | *present = 0; |
| 1193 | goto out; |
| 1194 | } |
| 1195 | } else if (SAS_ADDR(rri_resp+16) == 0 && |
| 1196 | phy->last_da_index < i) { |
| 1197 | phy->last_da_index = i; |
| 1198 | *index = i; |
| 1199 | *present = 0; |
| 1200 | goto out; |
| 1201 | } |
| 1202 | } |
| 1203 | res = -1; |
| 1204 | out: |
| 1205 | kfree(rri_req); |
| 1206 | kfree(rri_resp); |
| 1207 | return res; |
| 1208 | } |
| 1209 | |
| 1210 | #define CRI_REQ_SIZE 44 |
| 1211 | #define CRI_RESP_SIZE 8 |
| 1212 | |
| 1213 | static int sas_configure_set(struct domain_device *dev, int phy_id, |
| 1214 | u8 *sas_addr, int index, int include) |
| 1215 | { |
| 1216 | int res; |
| 1217 | u8 *cri_req; |
| 1218 | u8 *cri_resp; |
| 1219 | |
| 1220 | cri_req = alloc_smp_req(CRI_REQ_SIZE); |
| 1221 | if (!cri_req) |
| 1222 | return -ENOMEM; |
| 1223 | |
| 1224 | cri_resp = alloc_smp_resp(CRI_RESP_SIZE); |
| 1225 | if (!cri_resp) { |
| 1226 | kfree(cri_req); |
| 1227 | return -ENOMEM; |
| 1228 | } |
| 1229 | |
| 1230 | cri_req[1] = SMP_CONF_ROUTE_INFO; |
| 1231 | *(__be16 *)(cri_req+6) = cpu_to_be16(index); |
| 1232 | cri_req[9] = phy_id; |
| 1233 | if (SAS_ADDR(sas_addr) == 0 || !include) |
| 1234 | cri_req[12] |= 0x80; |
| 1235 | memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE); |
| 1236 | |
| 1237 | res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp, |
| 1238 | CRI_RESP_SIZE); |
| 1239 | if (res) |
| 1240 | goto out; |
| 1241 | res = cri_resp[2]; |
| 1242 | if (res == SMP_RESP_NO_INDEX) { |
| 1243 | SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x " |
| 1244 | "index 0x%x\n", |
| 1245 | SAS_ADDR(dev->sas_addr), phy_id, index); |
| 1246 | } |
| 1247 | out: |
| 1248 | kfree(cri_req); |
| 1249 | kfree(cri_resp); |
| 1250 | return res; |
| 1251 | } |
| 1252 | |
| 1253 | static int sas_configure_phy(struct domain_device *dev, int phy_id, |
| 1254 | u8 *sas_addr, int include) |
| 1255 | { |
| 1256 | int index; |
| 1257 | int present; |
| 1258 | int res; |
| 1259 | |
| 1260 | res = sas_configure_present(dev, phy_id, sas_addr, &index, &present); |
| 1261 | if (res) |
| 1262 | return res; |
| 1263 | if (include ^ present) |
| 1264 | return sas_configure_set(dev, phy_id, sas_addr, index,include); |
| 1265 | |
| 1266 | return res; |
| 1267 | } |
| 1268 | |
| 1269 | /** |
| 1270 | * sas_configure_parent -- configure routing table of parent |
| 1271 | * parent: parent expander |
| 1272 | * child: child expander |
| 1273 | * sas_addr: SAS port identifier of device directly attached to child |
| 1274 | */ |
| 1275 | static int sas_configure_parent(struct domain_device *parent, |
| 1276 | struct domain_device *child, |
| 1277 | u8 *sas_addr, int include) |
| 1278 | { |
| 1279 | struct expander_device *ex_parent = &parent->ex_dev; |
| 1280 | int res = 0; |
| 1281 | int i; |
| 1282 | |
| 1283 | if (parent->parent) { |
| 1284 | res = sas_configure_parent(parent->parent, parent, sas_addr, |
| 1285 | include); |
| 1286 | if (res) |
| 1287 | return res; |
| 1288 | } |
| 1289 | |
| 1290 | if (ex_parent->conf_route_table == 0) { |
| 1291 | SAS_DPRINTK("ex %016llx has self-configuring routing table\n", |
| 1292 | SAS_ADDR(parent->sas_addr)); |
| 1293 | return 0; |
| 1294 | } |
| 1295 | |
| 1296 | for (i = 0; i < ex_parent->num_phys; i++) { |
| 1297 | struct ex_phy *phy = &ex_parent->ex_phy[i]; |
| 1298 | |
| 1299 | if ((phy->routing_attr == TABLE_ROUTING) && |
| 1300 | (SAS_ADDR(phy->attached_sas_addr) == |
| 1301 | SAS_ADDR(child->sas_addr))) { |
| 1302 | res = sas_configure_phy(parent, i, sas_addr, include); |
| 1303 | if (res) |
| 1304 | return res; |
| 1305 | } |
| 1306 | } |
| 1307 | |
| 1308 | return res; |
| 1309 | } |
| 1310 | |
| 1311 | /** |
| 1312 | * sas_configure_routing -- configure routing |
| 1313 | * dev: expander device |
| 1314 | * sas_addr: port identifier of device directly attached to the expander device |
| 1315 | */ |
| 1316 | static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr) |
| 1317 | { |
| 1318 | if (dev->parent) |
| 1319 | return sas_configure_parent(dev->parent, dev, sas_addr, 1); |
| 1320 | return 0; |
| 1321 | } |
| 1322 | |
| 1323 | static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr) |
| 1324 | { |
| 1325 | if (dev->parent) |
| 1326 | return sas_configure_parent(dev->parent, dev, sas_addr, 0); |
| 1327 | return 0; |
| 1328 | } |
| 1329 | |
| 1330 | #if 0 |
| 1331 | #define SMP_BIN_ATTR_NAME "smp_portal" |
| 1332 | |
| 1333 | static void sas_ex_smp_hook(struct domain_device *dev) |
| 1334 | { |
| 1335 | struct expander_device *ex_dev = &dev->ex_dev; |
| 1336 | struct bin_attribute *bin_attr = &ex_dev->smp_bin_attr; |
| 1337 | |
| 1338 | memset(bin_attr, 0, sizeof(*bin_attr)); |
| 1339 | |
| 1340 | bin_attr->attr.name = SMP_BIN_ATTR_NAME; |
| 1341 | bin_attr->attr.owner = THIS_MODULE; |
| 1342 | bin_attr->attr.mode = 0600; |
| 1343 | |
| 1344 | bin_attr->size = 0; |
| 1345 | bin_attr->private = NULL; |
| 1346 | bin_attr->read = smp_portal_read; |
| 1347 | bin_attr->write= smp_portal_write; |
| 1348 | bin_attr->mmap = NULL; |
| 1349 | |
| 1350 | ex_dev->smp_portal_pid = -1; |
| 1351 | init_MUTEX(&ex_dev->smp_sema); |
| 1352 | } |
| 1353 | #endif |
| 1354 | |
| 1355 | /** |
| 1356 | * sas_discover_expander -- expander discovery |
| 1357 | * @ex: pointer to expander domain device |
| 1358 | * |
| 1359 | * See comment in sas_discover_sata(). |
| 1360 | */ |
| 1361 | static int sas_discover_expander(struct domain_device *dev) |
| 1362 | { |
| 1363 | int res; |
| 1364 | |
| 1365 | res = sas_notify_lldd_dev_found(dev); |
| 1366 | if (res) |
| 1367 | return res; |
| 1368 | |
| 1369 | res = sas_ex_general(dev); |
| 1370 | if (res) |
| 1371 | goto out_err; |
| 1372 | res = sas_ex_manuf_info(dev); |
| 1373 | if (res) |
| 1374 | goto out_err; |
| 1375 | |
| 1376 | res = sas_expander_discover(dev); |
| 1377 | if (res) { |
| 1378 | SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n", |
| 1379 | SAS_ADDR(dev->sas_addr), res); |
| 1380 | goto out_err; |
| 1381 | } |
| 1382 | |
| 1383 | sas_check_ex_subtractive_boundary(dev); |
| 1384 | res = sas_check_parent_topology(dev); |
| 1385 | if (res) |
| 1386 | goto out_err; |
| 1387 | return 0; |
| 1388 | out_err: |
| 1389 | sas_notify_lldd_dev_gone(dev); |
| 1390 | return res; |
| 1391 | } |
| 1392 | |
| 1393 | static int sas_ex_level_discovery(struct asd_sas_port *port, const int level) |
| 1394 | { |
| 1395 | int res = 0; |
| 1396 | struct domain_device *dev; |
| 1397 | |
| 1398 | list_for_each_entry(dev, &port->dev_list, dev_list_node) { |
| 1399 | if (dev->dev_type == EDGE_DEV || |
| 1400 | dev->dev_type == FANOUT_DEV) { |
| 1401 | struct sas_expander_device *ex = |
| 1402 | rphy_to_expander_device(dev->rphy); |
| 1403 | |
| 1404 | if (level == ex->level) |
| 1405 | res = sas_ex_discover_devices(dev, -1); |
| 1406 | else if (level > 0) |
| 1407 | res = sas_ex_discover_devices(port->port_dev, -1); |
| 1408 | |
| 1409 | } |
| 1410 | } |
| 1411 | |
| 1412 | return res; |
| 1413 | } |
| 1414 | |
| 1415 | static int sas_ex_bfs_disc(struct asd_sas_port *port) |
| 1416 | { |
| 1417 | int res; |
| 1418 | int level; |
| 1419 | |
| 1420 | do { |
| 1421 | level = port->disc.max_level; |
| 1422 | res = sas_ex_level_discovery(port, level); |
| 1423 | mb(); |
| 1424 | } while (level < port->disc.max_level); |
| 1425 | |
| 1426 | return res; |
| 1427 | } |
| 1428 | |
| 1429 | int sas_discover_root_expander(struct domain_device *dev) |
| 1430 | { |
| 1431 | int res; |
| 1432 | struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); |
| 1433 | |
| 1434 | sas_rphy_add(dev->rphy); |
| 1435 | |
| 1436 | ex->level = dev->port->disc.max_level; /* 0 */ |
| 1437 | res = sas_discover_expander(dev); |
| 1438 | if (!res) |
| 1439 | sas_ex_bfs_disc(dev->port); |
| 1440 | |
| 1441 | return res; |
| 1442 | } |
| 1443 | |
| 1444 | /* ---------- Domain revalidation ---------- */ |
| 1445 | |
| 1446 | static int sas_get_phy_discover(struct domain_device *dev, |
| 1447 | int phy_id, struct smp_resp *disc_resp) |
| 1448 | { |
| 1449 | int res; |
| 1450 | u8 *disc_req; |
| 1451 | |
| 1452 | disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); |
| 1453 | if (!disc_req) |
| 1454 | return -ENOMEM; |
| 1455 | |
| 1456 | disc_req[1] = SMP_DISCOVER; |
| 1457 | disc_req[9] = phy_id; |
| 1458 | |
| 1459 | res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, |
| 1460 | disc_resp, DISCOVER_RESP_SIZE); |
| 1461 | if (res) |
| 1462 | goto out; |
| 1463 | else if (disc_resp->result != SMP_RESP_FUNC_ACC) { |
| 1464 | res = disc_resp->result; |
| 1465 | goto out; |
| 1466 | } |
| 1467 | out: |
| 1468 | kfree(disc_req); |
| 1469 | return res; |
| 1470 | } |
| 1471 | |
| 1472 | static int sas_get_phy_change_count(struct domain_device *dev, |
| 1473 | int phy_id, int *pcc) |
| 1474 | { |
| 1475 | int res; |
| 1476 | struct smp_resp *disc_resp; |
| 1477 | |
| 1478 | disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); |
| 1479 | if (!disc_resp) |
| 1480 | return -ENOMEM; |
| 1481 | |
| 1482 | res = sas_get_phy_discover(dev, phy_id, disc_resp); |
| 1483 | if (!res) |
| 1484 | *pcc = disc_resp->disc.change_count; |
| 1485 | |
| 1486 | kfree(disc_resp); |
| 1487 | return res; |
| 1488 | } |
| 1489 | |
| 1490 | static int sas_get_phy_attached_sas_addr(struct domain_device *dev, |
| 1491 | int phy_id, u8 *attached_sas_addr) |
| 1492 | { |
| 1493 | int res; |
| 1494 | struct smp_resp *disc_resp; |
| 1495 | struct discover_resp *dr; |
| 1496 | |
| 1497 | disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); |
| 1498 | if (!disc_resp) |
| 1499 | return -ENOMEM; |
| 1500 | dr = &disc_resp->disc; |
| 1501 | |
| 1502 | res = sas_get_phy_discover(dev, phy_id, disc_resp); |
| 1503 | if (!res) { |
| 1504 | memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8); |
| 1505 | if (dr->attached_dev_type == 0) |
| 1506 | memset(attached_sas_addr, 0, 8); |
| 1507 | } |
| 1508 | kfree(disc_resp); |
| 1509 | return res; |
| 1510 | } |
| 1511 | |
| 1512 | static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, |
| 1513 | int from_phy) |
| 1514 | { |
| 1515 | struct expander_device *ex = &dev->ex_dev; |
| 1516 | int res = 0; |
| 1517 | int i; |
| 1518 | |
| 1519 | for (i = from_phy; i < ex->num_phys; i++) { |
| 1520 | int phy_change_count = 0; |
| 1521 | |
| 1522 | res = sas_get_phy_change_count(dev, i, &phy_change_count); |
| 1523 | if (res) |
| 1524 | goto out; |
| 1525 | else if (phy_change_count != ex->ex_phy[i].phy_change_count) { |
| 1526 | ex->ex_phy[i].phy_change_count = phy_change_count; |
| 1527 | *phy_id = i; |
| 1528 | return 0; |
| 1529 | } |
| 1530 | } |
| 1531 | out: |
| 1532 | return res; |
| 1533 | } |
| 1534 | |
| 1535 | static int sas_get_ex_change_count(struct domain_device *dev, int *ecc) |
| 1536 | { |
| 1537 | int res; |
| 1538 | u8 *rg_req; |
| 1539 | struct smp_resp *rg_resp; |
| 1540 | |
| 1541 | rg_req = alloc_smp_req(RG_REQ_SIZE); |
| 1542 | if (!rg_req) |
| 1543 | return -ENOMEM; |
| 1544 | |
| 1545 | rg_resp = alloc_smp_resp(RG_RESP_SIZE); |
| 1546 | if (!rg_resp) { |
| 1547 | kfree(rg_req); |
| 1548 | return -ENOMEM; |
| 1549 | } |
| 1550 | |
| 1551 | rg_req[1] = SMP_REPORT_GENERAL; |
| 1552 | |
| 1553 | res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, |
| 1554 | RG_RESP_SIZE); |
| 1555 | if (res) |
| 1556 | goto out; |
| 1557 | if (rg_resp->result != SMP_RESP_FUNC_ACC) { |
| 1558 | res = rg_resp->result; |
| 1559 | goto out; |
| 1560 | } |
| 1561 | |
| 1562 | *ecc = be16_to_cpu(rg_resp->rg.change_count); |
| 1563 | out: |
| 1564 | kfree(rg_resp); |
| 1565 | kfree(rg_req); |
| 1566 | return res; |
| 1567 | } |
| 1568 | |
| 1569 | static int sas_find_bcast_dev(struct domain_device *dev, |
| 1570 | struct domain_device **src_dev) |
| 1571 | { |
| 1572 | struct expander_device *ex = &dev->ex_dev; |
| 1573 | int ex_change_count = -1; |
| 1574 | int res; |
| 1575 | |
| 1576 | res = sas_get_ex_change_count(dev, &ex_change_count); |
| 1577 | if (res) |
| 1578 | goto out; |
| 1579 | if (ex_change_count != -1 && |
| 1580 | ex_change_count != ex->ex_change_count) { |
| 1581 | *src_dev = dev; |
| 1582 | ex->ex_change_count = ex_change_count; |
| 1583 | } else { |
| 1584 | struct domain_device *ch; |
| 1585 | |
| 1586 | list_for_each_entry(ch, &ex->children, siblings) { |
| 1587 | if (ch->dev_type == EDGE_DEV || |
| 1588 | ch->dev_type == FANOUT_DEV) { |
| 1589 | res = sas_find_bcast_dev(ch, src_dev); |
| 1590 | if (src_dev) |
| 1591 | return res; |
| 1592 | } |
| 1593 | } |
| 1594 | } |
| 1595 | out: |
| 1596 | return res; |
| 1597 | } |
| 1598 | |
| 1599 | static void sas_unregister_ex_tree(struct domain_device *dev) |
| 1600 | { |
| 1601 | struct expander_device *ex = &dev->ex_dev; |
| 1602 | struct domain_device *child, *n; |
| 1603 | |
| 1604 | list_for_each_entry_safe(child, n, &ex->children, siblings) { |
| 1605 | if (child->dev_type == EDGE_DEV || |
| 1606 | child->dev_type == FANOUT_DEV) |
| 1607 | sas_unregister_ex_tree(child); |
| 1608 | else |
| 1609 | sas_unregister_dev(child); |
| 1610 | } |
| 1611 | sas_unregister_dev(dev); |
| 1612 | } |
| 1613 | |
| 1614 | static void sas_unregister_devs_sas_addr(struct domain_device *parent, |
| 1615 | int phy_id) |
| 1616 | { |
| 1617 | struct expander_device *ex_dev = &parent->ex_dev; |
| 1618 | struct ex_phy *phy = &ex_dev->ex_phy[phy_id]; |
| 1619 | struct domain_device *child, *n; |
| 1620 | |
| 1621 | list_for_each_entry_safe(child, n, &ex_dev->children, siblings) { |
| 1622 | if (SAS_ADDR(child->sas_addr) == |
| 1623 | SAS_ADDR(phy->attached_sas_addr)) { |
| 1624 | if (child->dev_type == EDGE_DEV || |
| 1625 | child->dev_type == FANOUT_DEV) |
| 1626 | sas_unregister_ex_tree(child); |
| 1627 | else |
| 1628 | sas_unregister_dev(child); |
| 1629 | break; |
| 1630 | } |
| 1631 | } |
| 1632 | sas_disable_routing(parent, phy->attached_sas_addr); |
| 1633 | memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); |
| 1634 | sas_port_delete_phy(phy->port, phy->phy); |
| 1635 | if (phy->port->num_phys == 0) |
| 1636 | sas_port_delete(phy->port); |
| 1637 | phy->port = NULL; |
| 1638 | } |
| 1639 | |
| 1640 | static int sas_discover_bfs_by_root_level(struct domain_device *root, |
| 1641 | const int level) |
| 1642 | { |
| 1643 | struct expander_device *ex_root = &root->ex_dev; |
| 1644 | struct domain_device *child; |
| 1645 | int res = 0; |
| 1646 | |
| 1647 | list_for_each_entry(child, &ex_root->children, siblings) { |
| 1648 | if (child->dev_type == EDGE_DEV || |
| 1649 | child->dev_type == FANOUT_DEV) { |
| 1650 | struct sas_expander_device *ex = |
| 1651 | rphy_to_expander_device(child->rphy); |
| 1652 | |
| 1653 | if (level > ex->level) |
| 1654 | res = sas_discover_bfs_by_root_level(child, |
| 1655 | level); |
| 1656 | else if (level == ex->level) |
| 1657 | res = sas_ex_discover_devices(child, -1); |
| 1658 | } |
| 1659 | } |
| 1660 | return res; |
| 1661 | } |
| 1662 | |
| 1663 | static int sas_discover_bfs_by_root(struct domain_device *dev) |
| 1664 | { |
| 1665 | int res; |
| 1666 | struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); |
| 1667 | int level = ex->level+1; |
| 1668 | |
| 1669 | res = sas_ex_discover_devices(dev, -1); |
| 1670 | if (res) |
| 1671 | goto out; |
| 1672 | do { |
| 1673 | res = sas_discover_bfs_by_root_level(dev, level); |
| 1674 | mb(); |
| 1675 | level += 1; |
| 1676 | } while (level <= dev->port->disc.max_level); |
| 1677 | out: |
| 1678 | return res; |
| 1679 | } |
| 1680 | |
| 1681 | static int sas_discover_new(struct domain_device *dev, int phy_id) |
| 1682 | { |
| 1683 | struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id]; |
| 1684 | struct domain_device *child; |
| 1685 | int res; |
| 1686 | |
| 1687 | SAS_DPRINTK("ex %016llx phy%d new device attached\n", |
| 1688 | SAS_ADDR(dev->sas_addr), phy_id); |
| 1689 | res = sas_ex_phy_discover(dev, phy_id); |
| 1690 | if (res) |
| 1691 | goto out; |
| 1692 | res = sas_ex_discover_devices(dev, phy_id); |
| 1693 | if (res) |
| 1694 | goto out; |
| 1695 | list_for_each_entry(child, &dev->ex_dev.children, siblings) { |
| 1696 | if (SAS_ADDR(child->sas_addr) == |
| 1697 | SAS_ADDR(ex_phy->attached_sas_addr)) { |
| 1698 | if (child->dev_type == EDGE_DEV || |
| 1699 | child->dev_type == FANOUT_DEV) |
| 1700 | res = sas_discover_bfs_by_root(child); |
| 1701 | break; |
| 1702 | } |
| 1703 | } |
| 1704 | out: |
| 1705 | return res; |
| 1706 | } |
| 1707 | |
| 1708 | static int sas_rediscover_dev(struct domain_device *dev, int phy_id) |
| 1709 | { |
| 1710 | struct expander_device *ex = &dev->ex_dev; |
| 1711 | struct ex_phy *phy = &ex->ex_phy[phy_id]; |
| 1712 | u8 attached_sas_addr[8]; |
| 1713 | int res; |
| 1714 | |
| 1715 | res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr); |
| 1716 | switch (res) { |
| 1717 | case SMP_RESP_NO_PHY: |
| 1718 | phy->phy_state = PHY_NOT_PRESENT; |
| 1719 | sas_unregister_devs_sas_addr(dev, phy_id); |
| 1720 | goto out; break; |
| 1721 | case SMP_RESP_PHY_VACANT: |
| 1722 | phy->phy_state = PHY_VACANT; |
| 1723 | sas_unregister_devs_sas_addr(dev, phy_id); |
| 1724 | goto out; break; |
| 1725 | case SMP_RESP_FUNC_ACC: |
| 1726 | break; |
| 1727 | } |
| 1728 | |
| 1729 | if (SAS_ADDR(attached_sas_addr) == 0) { |
| 1730 | phy->phy_state = PHY_EMPTY; |
| 1731 | sas_unregister_devs_sas_addr(dev, phy_id); |
| 1732 | } else if (SAS_ADDR(attached_sas_addr) == |
| 1733 | SAS_ADDR(phy->attached_sas_addr)) { |
| 1734 | SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n", |
| 1735 | SAS_ADDR(dev->sas_addr), phy_id); |
James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 1736 | sas_ex_phy_discover(dev, phy_id); |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1737 | } else |
| 1738 | res = sas_discover_new(dev, phy_id); |
| 1739 | out: |
| 1740 | return res; |
| 1741 | } |
| 1742 | |
| 1743 | static int sas_rediscover(struct domain_device *dev, const int phy_id) |
| 1744 | { |
| 1745 | struct expander_device *ex = &dev->ex_dev; |
| 1746 | struct ex_phy *changed_phy = &ex->ex_phy[phy_id]; |
| 1747 | int res = 0; |
| 1748 | int i; |
| 1749 | |
| 1750 | SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n", |
| 1751 | SAS_ADDR(dev->sas_addr), phy_id); |
| 1752 | |
| 1753 | if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) { |
| 1754 | for (i = 0; i < ex->num_phys; i++) { |
| 1755 | struct ex_phy *phy = &ex->ex_phy[i]; |
| 1756 | |
| 1757 | if (i == phy_id) |
| 1758 | continue; |
| 1759 | if (SAS_ADDR(phy->attached_sas_addr) == |
| 1760 | SAS_ADDR(changed_phy->attached_sas_addr)) { |
| 1761 | SAS_DPRINTK("phy%d part of wide port with " |
| 1762 | "phy%d\n", phy_id, i); |
| 1763 | goto out; |
| 1764 | } |
| 1765 | } |
| 1766 | res = sas_rediscover_dev(dev, phy_id); |
| 1767 | } else |
| 1768 | res = sas_discover_new(dev, phy_id); |
| 1769 | out: |
| 1770 | return res; |
| 1771 | } |
| 1772 | |
| 1773 | /** |
| 1774 | * sas_revalidate_domain -- revalidate the domain |
| 1775 | * @port: port to the domain of interest |
| 1776 | * |
| 1777 | * NOTE: this process _must_ quit (return) as soon as any connection |
| 1778 | * errors are encountered. Connection recovery is done elsewhere. |
| 1779 | * Discover process only interrogates devices in order to discover the |
| 1780 | * domain. |
| 1781 | */ |
| 1782 | int sas_ex_revalidate_domain(struct domain_device *port_dev) |
| 1783 | { |
| 1784 | int res; |
| 1785 | struct domain_device *dev = NULL; |
| 1786 | |
| 1787 | res = sas_find_bcast_dev(port_dev, &dev); |
| 1788 | if (res) |
| 1789 | goto out; |
| 1790 | if (dev) { |
| 1791 | struct expander_device *ex = &dev->ex_dev; |
| 1792 | int i = 0, phy_id; |
| 1793 | |
| 1794 | do { |
| 1795 | phy_id = -1; |
| 1796 | res = sas_find_bcast_phy(dev, &phy_id, i); |
| 1797 | if (phy_id == -1) |
| 1798 | break; |
| 1799 | res = sas_rediscover(dev, phy_id); |
| 1800 | i = phy_id + 1; |
| 1801 | } while (i < ex->num_phys); |
| 1802 | } |
| 1803 | out: |
| 1804 | return res; |
| 1805 | } |
| 1806 | |
| 1807 | #if 0 |
| 1808 | /* ---------- SMP portal ---------- */ |
| 1809 | |
| 1810 | static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs, |
| 1811 | size_t size) |
| 1812 | { |
| 1813 | struct domain_device *dev = to_dom_device(kobj); |
| 1814 | struct expander_device *ex = &dev->ex_dev; |
| 1815 | |
| 1816 | if (offs != 0) |
| 1817 | return -EFBIG; |
| 1818 | else if (size == 0) |
| 1819 | return 0; |
| 1820 | |
| 1821 | down_interruptible(&ex->smp_sema); |
| 1822 | if (ex->smp_req) |
| 1823 | kfree(ex->smp_req); |
| 1824 | ex->smp_req = kzalloc(size, GFP_USER); |
| 1825 | if (!ex->smp_req) { |
| 1826 | up(&ex->smp_sema); |
| 1827 | return -ENOMEM; |
| 1828 | } |
| 1829 | memcpy(ex->smp_req, buf, size); |
| 1830 | ex->smp_req_size = size; |
| 1831 | ex->smp_portal_pid = current->pid; |
| 1832 | up(&ex->smp_sema); |
| 1833 | |
| 1834 | return size; |
| 1835 | } |
| 1836 | |
| 1837 | static ssize_t smp_portal_read(struct kobject *kobj, char *buf, loff_t offs, |
| 1838 | size_t size) |
| 1839 | { |
| 1840 | struct domain_device *dev = to_dom_device(kobj); |
| 1841 | struct expander_device *ex = &dev->ex_dev; |
| 1842 | u8 *smp_resp; |
| 1843 | int res = -EINVAL; |
| 1844 | |
| 1845 | /* XXX: sysfs gives us an offset of 0x10 or 0x8 while in fact |
| 1846 | * it should be 0. |
| 1847 | */ |
| 1848 | |
| 1849 | down_interruptible(&ex->smp_sema); |
| 1850 | if (!ex->smp_req || ex->smp_portal_pid != current->pid) |
| 1851 | goto out; |
| 1852 | |
| 1853 | res = 0; |
| 1854 | if (size == 0) |
| 1855 | goto out; |
| 1856 | |
| 1857 | res = -ENOMEM; |
| 1858 | smp_resp = alloc_smp_resp(size); |
| 1859 | if (!smp_resp) |
| 1860 | goto out; |
| 1861 | res = smp_execute_task(dev, ex->smp_req, ex->smp_req_size, |
| 1862 | smp_resp, size); |
| 1863 | if (!res) { |
| 1864 | memcpy(buf, smp_resp, size); |
| 1865 | res = size; |
| 1866 | } |
| 1867 | |
| 1868 | kfree(smp_resp); |
| 1869 | out: |
| 1870 | kfree(ex->smp_req); |
| 1871 | ex->smp_req = NULL; |
| 1872 | ex->smp_req_size = 0; |
| 1873 | ex->smp_portal_pid = -1; |
| 1874 | up(&ex->smp_sema); |
| 1875 | return res; |
| 1876 | } |
| 1877 | #endif |