| James Hogan | 7bae897 | 2014-01-17 10:58:46 -0300 | [diff] [blame] | 1 | What: /sys/class/rc/ |
| 2 | Date: Apr 2010 |
| 3 | KernelVersion: 2.6.35 |
| 4 | Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> |
| 5 | Description: |
| 6 | The rc/ class sub-directory belongs to the Remote Controller |
| 7 | core and provides a sysfs interface for configuring infrared |
| 8 | remote controller receivers. |
| 9 | |
| 10 | What: /sys/class/rc/rcN/ |
| 11 | Date: Apr 2010 |
| 12 | KernelVersion: 2.6.35 |
| 13 | Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> |
| 14 | Description: |
| 15 | A /sys/class/rc/rcN directory is created for each remote |
| 16 | control receiver device where N is the number of the receiver. |
| 17 | |
| 18 | What: /sys/class/rc/rcN/protocols |
| 19 | Date: Jun 2010 |
| 20 | KernelVersion: 2.6.36 |
| 21 | Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> |
| 22 | Description: |
| 23 | Reading this file returns a list of available protocols, |
| 24 | something like: |
| 25 | "rc5 [rc6] nec jvc [sony]" |
| 26 | Enabled protocols are shown in [] brackets. |
| 27 | Writing "+proto" will add a protocol to the list of enabled |
| 28 | protocols. |
| 29 | Writing "-proto" will remove a protocol from the list of enabled |
| 30 | protocols. |
| 31 | Writing "proto" will enable only "proto". |
| 32 | Writing "none" will disable all protocols. |
| 33 | Write fails with EINVAL if an invalid protocol combination or |
| 34 | unknown protocol name is used. |
| James Hogan | 00942d1 | 2014-01-17 10:58:49 -0300 | [diff] [blame] | 35 | |
| 36 | What: /sys/class/rc/rcN/filter |
| 37 | Date: Jan 2014 |
| 38 | KernelVersion: 3.15 |
| 39 | Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> |
| 40 | Description: |
| 41 | Sets the scancode filter expected value. |
| 42 | Use in combination with /sys/class/rc/rcN/filter_mask to set the |
| 43 | expected value of the bits set in the filter mask. |
| 44 | If the hardware supports it then scancodes which do not match |
| 45 | the filter will be ignored. Otherwise the write will fail with |
| 46 | an error. |
| 47 | This value may be reset to 0 if the current protocol is altered. |
| 48 | |
| 49 | What: /sys/class/rc/rcN/filter_mask |
| 50 | Date: Jan 2014 |
| 51 | KernelVersion: 3.15 |
| 52 | Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> |
| 53 | Description: |
| 54 | Sets the scancode filter mask of bits to compare. |
| 55 | Use in combination with /sys/class/rc/rcN/filter to set the bits |
| 56 | of the scancode which should be compared against the expected |
| 57 | value. A value of 0 disables the filter to allow all valid |
| 58 | scancodes to be processed. |
| 59 | If the hardware supports it then scancodes which do not match |
| 60 | the filter will be ignored. Otherwise the write will fail with |
| 61 | an error. |
| 62 | This value may be reset to 0 if the current protocol is altered. |
| 63 | |
| James Hogan | ab88c66 | 2014-02-28 20:17:05 -0300 | [diff] [blame] | 64 | What: /sys/class/rc/rcN/wakeup_protocols |
| 65 | Date: Feb 2014 |
| 66 | KernelVersion: 3.15 |
| 67 | Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> |
| 68 | Description: |
| 69 | Reading this file returns a list of available protocols to use |
| 70 | for the wakeup filter, something like: |
| 71 | "rc5 rc6 nec jvc [sony]" |
| 72 | The enabled wakeup protocol is shown in [] brackets. |
| 73 | Writing "+proto" will add a protocol to the list of enabled |
| 74 | wakeup protocols. |
| 75 | Writing "-proto" will remove a protocol from the list of enabled |
| 76 | wakeup protocols. |
| 77 | Writing "proto" will use "proto" for wakeup events. |
| 78 | Writing "none" will disable wakeup. |
| 79 | Write fails with EINVAL if an invalid protocol combination or |
| 80 | unknown protocol name is used, or if wakeup is not supported by |
| 81 | the hardware. |
| 82 | |
| James Hogan | 00942d1 | 2014-01-17 10:58:49 -0300 | [diff] [blame] | 83 | What: /sys/class/rc/rcN/wakeup_filter |
| 84 | Date: Jan 2014 |
| 85 | KernelVersion: 3.15 |
| 86 | Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> |
| 87 | Description: |
| 88 | Sets the scancode wakeup filter expected value. |
| 89 | Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to |
| 90 | set the expected value of the bits set in the wakeup filter mask |
| 91 | to trigger a system wake event. |
| 92 | If the hardware supports it and wakeup_filter_mask is not 0 then |
| 93 | scancodes which match the filter will wake the system from e.g. |
| 94 | suspend to RAM or power off. |
| 95 | Otherwise the write will fail with an error. |
| James Hogan | ab88c66 | 2014-02-28 20:17:05 -0300 | [diff] [blame] | 96 | This value may be reset to 0 if the wakeup protocol is altered. |
| James Hogan | 00942d1 | 2014-01-17 10:58:49 -0300 | [diff] [blame] | 97 | |
| 98 | What: /sys/class/rc/rcN/wakeup_filter_mask |
| 99 | Date: Jan 2014 |
| 100 | KernelVersion: 3.15 |
| 101 | Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> |
| 102 | Description: |
| 103 | Sets the scancode wakeup filter mask of bits to compare. |
| 104 | Use in combination with /sys/class/rc/rcN/wakeup_filter to set |
| 105 | the bits of the scancode which should be compared against the |
| 106 | expected value to trigger a system wake event. |
| 107 | If the hardware supports it and wakeup_filter_mask is not 0 then |
| 108 | scancodes which match the filter will wake the system from e.g. |
| 109 | suspend to RAM or power off. |
| 110 | Otherwise the write will fail with an error. |
| James Hogan | ab88c66 | 2014-02-28 20:17:05 -0300 | [diff] [blame] | 111 | This value may be reset to 0 if the wakeup protocol is altered. |