blob: 3397881bd63d27899f225465cb85ca00c87fb3bc [file] [log] [blame]
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt73usb
23 Abstract: rt73usb device specific routines.
24 Supported chipsets: rt2571W & rt2671.
25 */
26
27/*
28 * Set enviroment defines for rt2x00.h
29 */
30#define DRV_NAME "rt73usb"
31
32#include <linux/delay.h>
33#include <linux/etherdevice.h>
34#include <linux/init.h>
35#include <linux/kernel.h>
36#include <linux/module.h>
37#include <linux/usb.h>
38
39#include "rt2x00.h"
40#include "rt2x00usb.h"
41#include "rt73usb.h"
42
43/*
44 * Register access.
45 * All access to the CSR registers will go through the methods
46 * rt73usb_register_read and rt73usb_register_write.
47 * BBP and RF register require indirect register access,
48 * and use the CSR registers BBPCSR and RFCSR to achieve this.
49 * These indirect registers work with busy bits,
50 * and we will try maximal REGISTER_BUSY_COUNT times to access
51 * the register while taking a REGISTER_BUSY_DELAY us delay
52 * between each attampt. When the busy bit is still set at that time,
53 * the access attempt is considered to have failed,
54 * and we will print an error.
55 */
56static inline void rt73usb_register_read(const struct rt2x00_dev *rt2x00dev,
57 const unsigned int offset, u32 *value)
58{
59 __le32 reg;
60 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
61 USB_VENDOR_REQUEST_IN, offset,
62 &reg, sizeof(u32), REGISTER_TIMEOUT);
63 *value = le32_to_cpu(reg);
64}
65
66static inline void rt73usb_register_multiread(const struct rt2x00_dev
67 *rt2x00dev,
68 const unsigned int offset,
69 void *value, const u32 length)
70{
71 int timeout = REGISTER_TIMEOUT * (length / sizeof(u32));
72 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
73 USB_VENDOR_REQUEST_IN, offset,
74 value, length, timeout);
75}
76
77static inline void rt73usb_register_write(const struct rt2x00_dev *rt2x00dev,
78 const unsigned int offset, u32 value)
79{
80 __le32 reg = cpu_to_le32(value);
81 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
82 USB_VENDOR_REQUEST_OUT, offset,
83 &reg, sizeof(u32), REGISTER_TIMEOUT);
84}
85
86static inline void rt73usb_register_multiwrite(const struct rt2x00_dev
87 *rt2x00dev,
88 const unsigned int offset,
89 void *value, const u32 length)
90{
91 int timeout = REGISTER_TIMEOUT * (length / sizeof(u32));
92 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
93 USB_VENDOR_REQUEST_OUT, offset,
94 value, length, timeout);
95}
96
97static u32 rt73usb_bbp_check(const struct rt2x00_dev *rt2x00dev)
98{
99 u32 reg;
100 unsigned int i;
101
102 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
103 rt73usb_register_read(rt2x00dev, PHY_CSR3, &reg);
104 if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY))
105 break;
106 udelay(REGISTER_BUSY_DELAY);
107 }
108
109 return reg;
110}
111
112static void rt73usb_bbp_write(const struct rt2x00_dev *rt2x00dev,
113 const unsigned int word, const u8 value)
114{
115 u32 reg;
116
117 /*
118 * Wait until the BBP becomes ready.
119 */
120 reg = rt73usb_bbp_check(rt2x00dev);
121 if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
122 ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
123 return;
124 }
125
126 /*
127 * Write the data into the BBP.
128 */
129 reg = 0;
130 rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
131 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
132 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
133 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
134
135 rt73usb_register_write(rt2x00dev, PHY_CSR3, reg);
136}
137
138static void rt73usb_bbp_read(const struct rt2x00_dev *rt2x00dev,
139 const unsigned int word, u8 *value)
140{
141 u32 reg;
142
143 /*
144 * Wait until the BBP becomes ready.
145 */
146 reg = rt73usb_bbp_check(rt2x00dev);
147 if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
148 ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
149 return;
150 }
151
152 /*
153 * Write the request into the BBP.
154 */
155 reg = 0;
156 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
157 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
158 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
159
160 rt73usb_register_write(rt2x00dev, PHY_CSR3, reg);
161
162 /*
163 * Wait until the BBP becomes ready.
164 */
165 reg = rt73usb_bbp_check(rt2x00dev);
166 if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
167 ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
168 *value = 0xff;
169 return;
170 }
171
172 *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
173}
174
175static void rt73usb_rf_write(const struct rt2x00_dev *rt2x00dev,
176 const unsigned int word, const u32 value)
177{
178 u32 reg;
179 unsigned int i;
180
181 if (!word)
182 return;
183
184 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
185 rt73usb_register_read(rt2x00dev, PHY_CSR4, &reg);
186 if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY))
187 goto rf_write;
188 udelay(REGISTER_BUSY_DELAY);
189 }
190
191 ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n");
192 return;
193
194rf_write:
195 reg = 0;
196 rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
197
198 if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
199 rt2x00_rf(&rt2x00dev->chip, RF2527))
200 rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 21);
201 else
202 rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 20);
203
204 rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
205 rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
206
207 rt73usb_register_write(rt2x00dev, PHY_CSR4, reg);
208 rt2x00_rf_write(rt2x00dev, word, value);
209}
210
211#ifdef CONFIG_RT2X00_LIB_DEBUGFS
212#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
213
214static void rt73usb_read_csr(const struct rt2x00_dev *rt2x00dev,
215 const unsigned int word, u32 *data)
216{
217 rt73usb_register_read(rt2x00dev, CSR_OFFSET(word), data);
218}
219
220static void rt73usb_write_csr(const struct rt2x00_dev *rt2x00dev,
221 const unsigned int word, u32 data)
222{
223 rt73usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
224}
225
226static const struct rt2x00debug rt73usb_rt2x00debug = {
227 .owner = THIS_MODULE,
228 .csr = {
229 .read = rt73usb_read_csr,
230 .write = rt73usb_write_csr,
231 .word_size = sizeof(u32),
232 .word_count = CSR_REG_SIZE / sizeof(u32),
233 },
234 .eeprom = {
235 .read = rt2x00_eeprom_read,
236 .write = rt2x00_eeprom_write,
237 .word_size = sizeof(u16),
238 .word_count = EEPROM_SIZE / sizeof(u16),
239 },
240 .bbp = {
241 .read = rt73usb_bbp_read,
242 .write = rt73usb_bbp_write,
243 .word_size = sizeof(u8),
244 .word_count = BBP_SIZE / sizeof(u8),
245 },
246 .rf = {
247 .read = rt2x00_rf_read,
248 .write = rt73usb_rf_write,
249 .word_size = sizeof(u32),
250 .word_count = RF_SIZE / sizeof(u32),
251 },
252};
253#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
254
255/*
256 * Configuration handlers.
257 */
258static void rt73usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
259{
260 __le32 reg[2];
261 u32 tmp;
262
263 memset(&reg, 0, sizeof(reg));
264 memcpy(&reg, addr, ETH_ALEN);
265
266 tmp = le32_to_cpu(reg[1]);
267 rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
268 reg[1] = cpu_to_le32(tmp);
269
270 /*
271 * The MAC address is passed to us as an array of bytes,
272 * that array is little endian, so no need for byte ordering.
273 */
274 rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, &reg, sizeof(reg));
275}
276
277static void rt73usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
278{
279 __le32 reg[2];
280 u32 tmp;
281
282 memset(&reg, 0, sizeof(reg));
283 memcpy(&reg, bssid, ETH_ALEN);
284
285 tmp = le32_to_cpu(reg[1]);
286 rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3);
287 reg[1] = cpu_to_le32(tmp);
288
289 /*
290 * The BSSID is passed to us as an array of bytes,
291 * that array is little endian, so no need for byte ordering.
292 */
293 rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, &reg, sizeof(reg));
294}
295
296static void rt73usb_config_packet_filter(struct rt2x00_dev *rt2x00dev,
297 const unsigned int filter)
298{
299 int promisc = !!(filter & IFF_PROMISC);
300 int multicast = !!(filter & IFF_MULTICAST);
301 int broadcast = !!(filter & IFF_BROADCAST);
302 u32 reg;
303
304 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
305 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME, !promisc);
306 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST, !multicast);
307 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BORADCAST, !broadcast);
308 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
309}
310
311static void rt73usb_config_type(struct rt2x00_dev *rt2x00dev, const int type)
312{
313 u32 reg;
314
315 /*
316 * Clear current synchronisation setup.
317 * For the Beacon base registers we only need to clear
318 * the first byte since that byte contains the VALID and OWNER
319 * bits which (when set to 0) will invalidate the entire beacon.
320 */
321 rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0);
322 rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
323 rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
324 rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
325 rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
326
327 /*
328 * Apply hardware packet filter.
329 */
330 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
331
332 if (!is_monitor_present(&rt2x00dev->interface) &&
333 (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
334 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS, 1);
335 else
336 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS, 0);
337
338 /*
339 * If there is a non-monitor interface present
340 * the packet should be strict (even if a monitor interface is present!).
341 * When there is only 1 interface present which is in monitor mode
342 * we should start accepting _all_ frames.
343 */
344 if (is_interface_present(&rt2x00dev->interface)) {
345 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC, 1);
346 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL, 1);
347 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL, 1);
348 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
349 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 1);
350 } else if (is_monitor_present(&rt2x00dev->interface)) {
351 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC, 0);
352 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL, 0);
353 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL, 0);
354 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 0);
355 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 0);
356 }
357
358 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
359
360 /*
361 * Enable synchronisation.
362 */
363 rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
364 if (is_interface_present(&rt2x00dev->interface)) {
365 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
366 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
367 }
368
369 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
370 if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
371 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 2);
372 else if (type == IEEE80211_IF_TYPE_STA)
373 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 1);
374 else if (is_monitor_present(&rt2x00dev->interface) &&
375 !is_interface_present(&rt2x00dev->interface))
376 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
377
378 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
379}
380
381static void rt73usb_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
382{
383 struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
384 u32 reg;
385 u32 value;
386 u32 preamble;
387
388 if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
389 preamble = SHORT_PREAMBLE;
390 else
391 preamble = PREAMBLE;
392
393 reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
394
395 rt73usb_register_write(rt2x00dev, TXRX_CSR5, reg);
396
397 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
398 value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
399 SHORT_DIFS : DIFS) +
400 PLCP + preamble + get_duration(ACK_SIZE, 10);
401 rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, value);
402 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
403
404 rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
405 if (preamble == SHORT_PREAMBLE)
406 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE, 1);
407 else
408 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE, 0);
409 rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
410}
411
412static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev,
413 const int phymode)
414{
415 struct ieee80211_hw_mode *mode;
416 struct ieee80211_rate *rate;
417
418 if (phymode == MODE_IEEE80211A)
419 rt2x00dev->curr_hwmode = HWMODE_A;
420 else if (phymode == MODE_IEEE80211B)
421 rt2x00dev->curr_hwmode = HWMODE_B;
422 else
423 rt2x00dev->curr_hwmode = HWMODE_G;
424
425 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
426 rate = &mode->rates[mode->num_rates - 1];
427
428 rt73usb_config_rate(rt2x00dev, rate->val2);
429}
430
431static void rt73usb_config_lock_channel(struct rt2x00_dev *rt2x00dev,
432 struct rf_channel *rf,
433 const int txpower)
434{
435 u8 r3;
436 u8 r94;
437 u8 smart;
438
439 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
440 rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
441
442 smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
443 rt2x00_rf(&rt2x00dev->chip, RF2527));
444
445 rt73usb_bbp_read(rt2x00dev, 3, &r3);
446 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
447 rt73usb_bbp_write(rt2x00dev, 3, r3);
448
449 r94 = 6;
450 if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
451 r94 += txpower - MAX_TXPOWER;
452 else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
453 r94 += txpower;
454 rt73usb_bbp_write(rt2x00dev, 94, r94);
455
456 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
457 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
458 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
459 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
460
461 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
462 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
463 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
464 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
465
466 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
467 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
468 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
469 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
470
471 udelay(10);
472}
473
474static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev,
475 const int index, const int channel,
476 const int txpower)
477{
478 struct rf_channel rf;
479
480 /*
481 * Fill rf_reg structure.
482 */
483 memcpy(&rf, &rt2x00dev->spec.channels[index], sizeof(rf));
484
485 rt73usb_config_lock_channel(rt2x00dev, &rf, txpower);
486}
487
488static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev,
489 const int txpower)
490{
491 struct rf_channel rf;
492
493 rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
494 rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
495 rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
496 rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
497
498 rt73usb_config_lock_channel(rt2x00dev, &rf, txpower);
499}
500
501static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
502 const int antenna_tx,
503 const int antenna_rx)
504{
505 u8 r3;
506 u8 r4;
507 u8 r77;
508
509 rt73usb_bbp_read(rt2x00dev, 3, &r3);
510 rt73usb_bbp_read(rt2x00dev, 4, &r4);
511 rt73usb_bbp_read(rt2x00dev, 77, &r77);
512
513 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
514
515 switch (antenna_rx) {
516 case ANTENNA_SW_DIVERSITY:
517 case ANTENNA_HW_DIVERSITY:
518 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
519 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
520 !!(rt2x00dev->curr_hwmode != HWMODE_A));
521 break;
522 case ANTENNA_A:
523 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
524 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
525
526 if (rt2x00dev->curr_hwmode == HWMODE_A)
527 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
528 else
529 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
530 break;
531 case ANTENNA_B:
532 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
533 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
534
535 if (rt2x00dev->curr_hwmode == HWMODE_A)
536 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
537 else
538 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
539 break;
540 }
541
542 rt73usb_bbp_write(rt2x00dev, 77, r77);
543 rt73usb_bbp_write(rt2x00dev, 3, r3);
544 rt73usb_bbp_write(rt2x00dev, 4, r4);
545}
546
547static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
548 const int antenna_tx,
549 const int antenna_rx)
550{
551 u8 r3;
552 u8 r4;
553 u8 r77;
554
555 rt73usb_bbp_read(rt2x00dev, 3, &r3);
556 rt73usb_bbp_read(rt2x00dev, 4, &r4);
557 rt73usb_bbp_read(rt2x00dev, 77, &r77);
558
559 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
560 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
561 !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
562
563 switch (antenna_rx) {
564 case ANTENNA_SW_DIVERSITY:
565 case ANTENNA_HW_DIVERSITY:
566 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
567 break;
568 case ANTENNA_A:
569 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
570 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
571 break;
572 case ANTENNA_B:
573 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
574 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
575 break;
576 }
577
578 rt73usb_bbp_write(rt2x00dev, 77, r77);
579 rt73usb_bbp_write(rt2x00dev, 3, r3);
580 rt73usb_bbp_write(rt2x00dev, 4, r4);
581}
582
583struct antenna_sel {
584 u8 word;
585 /*
586 * value[0] -> non-LNA
587 * value[1] -> LNA
588 */
589 u8 value[2];
590};
591
592static const struct antenna_sel antenna_sel_a[] = {
593 { 96, { 0x58, 0x78 } },
594 { 104, { 0x38, 0x48 } },
595 { 75, { 0xfe, 0x80 } },
596 { 86, { 0xfe, 0x80 } },
597 { 88, { 0xfe, 0x80 } },
598 { 35, { 0x60, 0x60 } },
599 { 97, { 0x58, 0x58 } },
600 { 98, { 0x58, 0x58 } },
601};
602
603static const struct antenna_sel antenna_sel_bg[] = {
604 { 96, { 0x48, 0x68 } },
605 { 104, { 0x2c, 0x3c } },
606 { 75, { 0xfe, 0x80 } },
607 { 86, { 0xfe, 0x80 } },
608 { 88, { 0xfe, 0x80 } },
609 { 35, { 0x50, 0x50 } },
610 { 97, { 0x48, 0x48 } },
611 { 98, { 0x48, 0x48 } },
612};
613
614static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
615 const int antenna_tx, const int antenna_rx)
616{
617 const struct antenna_sel *sel;
618 unsigned int lna;
619 unsigned int i;
620 u32 reg;
621
622 rt73usb_register_read(rt2x00dev, PHY_CSR0, &reg);
623
624 if (rt2x00dev->curr_hwmode == HWMODE_A) {
625 sel = antenna_sel_a;
626 lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
627
628 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG, 0);
629 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A, 1);
630 } else {
631 sel = antenna_sel_bg;
632 lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
633
634 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG, 1);
635 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A, 0);
636 }
637
638 for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
639 rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
640
641 rt73usb_register_write(rt2x00dev, PHY_CSR0, reg);
642
643 if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
644 rt2x00_rf(&rt2x00dev->chip, RF5225))
645 rt73usb_config_antenna_5x(rt2x00dev, antenna_tx, antenna_rx);
646 else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
647 rt2x00_rf(&rt2x00dev->chip, RF2527))
648 rt73usb_config_antenna_2x(rt2x00dev, antenna_tx, antenna_rx);
649}
650
651static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
652 const int short_slot_time,
653 const int beacon_int)
654{
655 u32 reg;
656
657 rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
658 rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME,
659 short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
660 rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
661
662 rt73usb_register_read(rt2x00dev, MAC_CSR8, &reg);
663 rt2x00_set_field32(&reg, MAC_CSR8_SIFS, SIFS);
664 rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
665 rt2x00_set_field32(&reg, MAC_CSR8_EIFS, EIFS);
666 rt73usb_register_write(rt2x00dev, MAC_CSR8, reg);
667
668 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
669 rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
670 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
671
672 rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
673 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
674 rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
675
676 rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
677 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, beacon_int * 16);
678 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
679}
680
681static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
682 const unsigned int flags,
683 struct ieee80211_conf *conf)
684{
685 int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
686
687 if (flags & CONFIG_UPDATE_PHYMODE)
688 rt73usb_config_phymode(rt2x00dev, conf->phymode);
689 if (flags & CONFIG_UPDATE_CHANNEL)
690 rt73usb_config_channel(rt2x00dev, conf->channel_val,
691 conf->channel, conf->power_level);
692 if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
693 rt73usb_config_txpower(rt2x00dev, conf->power_level);
694 if (flags & CONFIG_UPDATE_ANTENNA)
695 rt73usb_config_antenna(rt2x00dev, conf->antenna_sel_tx,
696 conf->antenna_sel_rx);
697 if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
698 rt73usb_config_duration(rt2x00dev, short_slot_time,
699 conf->beacon_int);
700}
701
702/*
703 * LED functions.
704 */
705static void rt73usb_enable_led(struct rt2x00_dev *rt2x00dev)
706{
707 u32 reg;
708
709 rt73usb_register_read(rt2x00dev, MAC_CSR14, &reg);
710 rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, 70);
711 rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, 30);
712 rt73usb_register_write(rt2x00dev, MAC_CSR14, reg);
713
714 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1);
715 if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A)
716 rt2x00_set_field16(&rt2x00dev->led_reg,
717 MCU_LEDCS_LINK_A_STATUS, 1);
718 else
719 rt2x00_set_field16(&rt2x00dev->led_reg,
720 MCU_LEDCS_LINK_BG_STATUS, 1);
721
722 rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000,
723 rt2x00dev->led_reg, REGISTER_TIMEOUT);
724}
725
726static void rt73usb_disable_led(struct rt2x00_dev *rt2x00dev)
727{
728 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 0);
729 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, 0);
730 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, 0);
731
732 rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000,
733 rt2x00dev->led_reg, REGISTER_TIMEOUT);
734}
735
736static void rt73usb_activity_led(struct rt2x00_dev *rt2x00dev, int rssi)
737{
738 u32 led;
739
740 if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH)
741 return;
742
743 /*
744 * Led handling requires a positive value for the rssi,
745 * to do that correctly we need to add the correction.
746 */
747 rssi += rt2x00dev->rssi_offset;
748
749 if (rssi <= 30)
750 led = 0;
751 else if (rssi <= 39)
752 led = 1;
753 else if (rssi <= 49)
754 led = 2;
755 else if (rssi <= 53)
756 led = 3;
757 else if (rssi <= 63)
758 led = 4;
759 else
760 led = 5;
761
762 rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, led,
763 rt2x00dev->led_reg, REGISTER_TIMEOUT);
764}
765
766/*
767 * Link tuning
768 */
769static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev)
770{
771 u32 reg;
772
773 /*
774 * Update FCS error count from register.
775 */
776 rt73usb_register_read(rt2x00dev, STA_CSR0, &reg);
777 rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
778
779 /*
780 * Update False CCA count from register.
781 */
782 rt73usb_register_read(rt2x00dev, STA_CSR1, &reg);
783 reg = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
784 rt2x00dev->link.false_cca =
785 rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
786}
787
788static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
789{
790 rt73usb_bbp_write(rt2x00dev, 17, 0x20);
791 rt2x00dev->link.vgc_level = 0x20;
792}
793
794static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev)
795{
796 int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
797 u8 r17;
798 u8 up_bound;
799 u8 low_bound;
800
801 /*
802 * Update Led strength
803 */
804 rt73usb_activity_led(rt2x00dev, rssi);
805
806 rt73usb_bbp_read(rt2x00dev, 17, &r17);
807
808 /*
809 * Determine r17 bounds.
810 */
811 if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
812 low_bound = 0x28;
813 up_bound = 0x48;
814
815 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
816 low_bound += 0x10;
817 up_bound += 0x10;
818 }
819 } else {
820 if (rssi > -82) {
821 low_bound = 0x1c;
822 up_bound = 0x40;
823 } else if (rssi > -84) {
824 low_bound = 0x1c;
825 up_bound = 0x20;
826 } else {
827 low_bound = 0x1c;
828 up_bound = 0x1c;
829 }
830
831 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
832 low_bound += 0x14;
833 up_bound += 0x10;
834 }
835 }
836
837 /*
838 * Special big-R17 for very short distance
839 */
840 if (rssi > -35) {
841 if (r17 != 0x60)
842 rt73usb_bbp_write(rt2x00dev, 17, 0x60);
843 return;
844 }
845
846 /*
847 * Special big-R17 for short distance
848 */
849 if (rssi >= -58) {
850 if (r17 != up_bound)
851 rt73usb_bbp_write(rt2x00dev, 17, up_bound);
852 return;
853 }
854
855 /*
856 * Special big-R17 for middle-short distance
857 */
858 if (rssi >= -66) {
859 low_bound += 0x10;
860 if (r17 != low_bound)
861 rt73usb_bbp_write(rt2x00dev, 17, low_bound);
862 return;
863 }
864
865 /*
866 * Special mid-R17 for middle distance
867 */
868 if (rssi >= -74) {
869 if (r17 != (low_bound + 0x10))
870 rt73usb_bbp_write(rt2x00dev, 17, low_bound + 0x08);
871 return;
872 }
873
874 /*
875 * Special case: Change up_bound based on the rssi.
876 * Lower up_bound when rssi is weaker then -74 dBm.
877 */
878 up_bound -= 2 * (-74 - rssi);
879 if (low_bound > up_bound)
880 up_bound = low_bound;
881
882 if (r17 > up_bound) {
883 rt73usb_bbp_write(rt2x00dev, 17, up_bound);
884 return;
885 }
886
887 /*
888 * r17 does not yet exceed upper limit, continue and base
889 * the r17 tuning on the false CCA count.
890 */
891 if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) {
892 r17 += 4;
893 if (r17 > up_bound)
894 r17 = up_bound;
895 rt73usb_bbp_write(rt2x00dev, 17, r17);
896 } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) {
897 r17 -= 4;
898 if (r17 < low_bound)
899 r17 = low_bound;
900 rt73usb_bbp_write(rt2x00dev, 17, r17);
901 }
902}
903
904/*
905 * Firmware name function.
906 */
907static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
908{
909 return FIRMWARE_RT2571;
910}
911
912/*
913 * Initialization functions.
914 */
915static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
916 const size_t len)
917{
918 unsigned int i;
919 int status;
920 u32 reg;
921 char *ptr = data;
922 char *cache;
923 int buflen;
924 int timeout;
925
926 /*
927 * Wait for stable hardware.
928 */
929 for (i = 0; i < 100; i++) {
930 rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
931 if (reg)
932 break;
933 msleep(1);
934 }
935
936 if (!reg) {
937 ERROR(rt2x00dev, "Unstable hardware.\n");
938 return -EBUSY;
939 }
940
941 /*
942 * Write firmware to device.
943 * We setup a seperate cache for this action,
944 * since we are going to write larger chunks of data
945 * then normally used cache size.
946 */
947 cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
948 if (!cache) {
949 ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
950 return -ENOMEM;
951 }
952
953 for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
954 buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
955 timeout = REGISTER_TIMEOUT * (buflen / sizeof(u32));
956
957 memcpy(cache, ptr, buflen);
958
959 rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
960 USB_VENDOR_REQUEST_OUT,
961 FIRMWARE_IMAGE_BASE + i, 0x0000,
962 cache, buflen, timeout);
963
964 ptr += buflen;
965 }
966
967 kfree(cache);
968
969 /*
970 * Send firmware request to device to load firmware,
971 * we need to specify a long timeout time.
972 */
973 status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
974 0x0000, USB_MODE_FIRMWARE,
975 REGISTER_TIMEOUT_FIRMWARE);
976 if (status < 0) {
977 ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
978 return status;
979 }
980
981 rt73usb_disable_led(rt2x00dev);
982
983 return 0;
984}
985
986static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
987{
988 u32 reg;
989
990 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
991 rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
992 rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
993 rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
994 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
995
996 rt73usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
997 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
998 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
999 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
1000 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
1001 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
1002 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
1003 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
1004 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
1005 rt73usb_register_write(rt2x00dev, TXRX_CSR1, reg);
1006
1007 /*
1008 * CCK TXD BBP registers
1009 */
1010 rt73usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
1011 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
1012 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
1013 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
1014 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
1015 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
1016 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
1017 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
1018 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
1019 rt73usb_register_write(rt2x00dev, TXRX_CSR2, reg);
1020
1021 /*
1022 * OFDM TXD BBP registers
1023 */
1024 rt73usb_register_read(rt2x00dev, TXRX_CSR3, &reg);
1025 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
1026 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
1027 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
1028 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
1029 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
1030 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
1031 rt73usb_register_write(rt2x00dev, TXRX_CSR3, reg);
1032
1033 rt73usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
1034 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
1035 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
1036 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
1037 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
1038 rt73usb_register_write(rt2x00dev, TXRX_CSR7, reg);
1039
1040 rt73usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
1041 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
1042 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
1043 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
1044 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
1045 rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg);
1046
1047 rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
1048
1049 rt73usb_register_read(rt2x00dev, MAC_CSR6, &reg);
1050 rt2x00_set_field32(&reg, MAC_CSR6_MAX_FRAME_UNIT, 0xfff);
1051 rt73usb_register_write(rt2x00dev, MAC_CSR6, reg);
1052
1053 rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718);
1054
1055 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
1056 return -EBUSY;
1057
1058 rt73usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00);
1059
1060 /*
1061 * Invalidate all Shared Keys (SEC_CSR0),
1062 * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1063 */
1064 rt73usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
1065 rt73usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
1066 rt73usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
1067
1068 reg = 0x000023b0;
1069 if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
1070 rt2x00_rf(&rt2x00dev->chip, RF2527))
1071 rt2x00_set_field32(&reg, PHY_CSR1_RF_RPI, 1);
1072 rt73usb_register_write(rt2x00dev, PHY_CSR1, reg);
1073
1074 rt73usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06);
1075 rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1076 rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
1077
1078 rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
1079 rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
1080 rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
1081 rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
1082
1083 rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
1084 rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
1085 rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
1086 rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
1087
1088 rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
1089 rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
1090 rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
1091
1092 /*
1093 * We must clear the error counters.
1094 * These registers are cleared on read,
1095 * so we may pass a useless variable to store the value.
1096 */
1097 rt73usb_register_read(rt2x00dev, STA_CSR0, &reg);
1098 rt73usb_register_read(rt2x00dev, STA_CSR1, &reg);
1099 rt73usb_register_read(rt2x00dev, STA_CSR2, &reg);
1100
1101 /*
1102 * Reset MAC and BBP registers.
1103 */
1104 rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1105 rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1106 rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1107 rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1108
1109 rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1110 rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1111 rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1112 rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1113
1114 rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1115 rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1116 rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1117
1118 return 0;
1119}
1120
1121static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
1122{
1123 unsigned int i;
1124 u16 eeprom;
1125 u8 reg_id;
1126 u8 value;
1127
1128 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1129 rt73usb_bbp_read(rt2x00dev, 0, &value);
1130 if ((value != 0xff) && (value != 0x00))
1131 goto continue_csr_init;
1132 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
1133 udelay(REGISTER_BUSY_DELAY);
1134 }
1135
1136 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1137 return -EACCES;
1138
1139continue_csr_init:
1140 rt73usb_bbp_write(rt2x00dev, 3, 0x80);
1141 rt73usb_bbp_write(rt2x00dev, 15, 0x30);
1142 rt73usb_bbp_write(rt2x00dev, 21, 0xc8);
1143 rt73usb_bbp_write(rt2x00dev, 22, 0x38);
1144 rt73usb_bbp_write(rt2x00dev, 23, 0x06);
1145 rt73usb_bbp_write(rt2x00dev, 24, 0xfe);
1146 rt73usb_bbp_write(rt2x00dev, 25, 0x0a);
1147 rt73usb_bbp_write(rt2x00dev, 26, 0x0d);
1148 rt73usb_bbp_write(rt2x00dev, 32, 0x0b);
1149 rt73usb_bbp_write(rt2x00dev, 34, 0x12);
1150 rt73usb_bbp_write(rt2x00dev, 37, 0x07);
1151 rt73usb_bbp_write(rt2x00dev, 39, 0xf8);
1152 rt73usb_bbp_write(rt2x00dev, 41, 0x60);
1153 rt73usb_bbp_write(rt2x00dev, 53, 0x10);
1154 rt73usb_bbp_write(rt2x00dev, 54, 0x18);
1155 rt73usb_bbp_write(rt2x00dev, 60, 0x10);
1156 rt73usb_bbp_write(rt2x00dev, 61, 0x04);
1157 rt73usb_bbp_write(rt2x00dev, 62, 0x04);
1158 rt73usb_bbp_write(rt2x00dev, 75, 0xfe);
1159 rt73usb_bbp_write(rt2x00dev, 86, 0xfe);
1160 rt73usb_bbp_write(rt2x00dev, 88, 0xfe);
1161 rt73usb_bbp_write(rt2x00dev, 90, 0x0f);
1162 rt73usb_bbp_write(rt2x00dev, 99, 0x00);
1163 rt73usb_bbp_write(rt2x00dev, 102, 0x16);
1164 rt73usb_bbp_write(rt2x00dev, 107, 0x04);
1165
1166 DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
1167 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1168 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1169
1170 if (eeprom != 0xffff && eeprom != 0x0000) {
1171 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1172 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1173 DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
1174 reg_id, value);
1175 rt73usb_bbp_write(rt2x00dev, reg_id, value);
1176 }
1177 }
1178 DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
1179
1180 return 0;
1181}
1182
1183/*
1184 * Device state switch handlers.
1185 */
1186static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
1187 enum dev_state state)
1188{
1189 u32 reg;
1190
1191 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
1192 rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
1193 state == STATE_RADIO_RX_OFF);
1194 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
1195}
1196
1197static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
1198{
1199 /*
1200 * Initialize all registers.
1201 */
1202 if (rt73usb_init_registers(rt2x00dev) ||
1203 rt73usb_init_bbp(rt2x00dev)) {
1204 ERROR(rt2x00dev, "Register initialization failed.\n");
1205 return -EIO;
1206 }
1207
1208 rt2x00usb_enable_radio(rt2x00dev);
1209
1210 /*
1211 * Enable LED
1212 */
1213 rt73usb_enable_led(rt2x00dev);
1214
1215 return 0;
1216}
1217
1218static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev)
1219{
1220 /*
1221 * Disable LED
1222 */
1223 rt73usb_disable_led(rt2x00dev);
1224
1225 rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
1226
1227 /*
1228 * Disable synchronisation.
1229 */
1230 rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0);
1231
1232 rt2x00usb_disable_radio(rt2x00dev);
1233}
1234
1235static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1236{
1237 u32 reg;
1238 unsigned int i;
1239 char put_to_sleep;
1240 char current_state;
1241
1242 put_to_sleep = (state != STATE_AWAKE);
1243
1244 rt73usb_register_read(rt2x00dev, MAC_CSR12, &reg);
1245 rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1246 rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
1247 rt73usb_register_write(rt2x00dev, MAC_CSR12, reg);
1248
1249 /*
1250 * Device is not guaranteed to be in the requested state yet.
1251 * We must wait until the register indicates that the
1252 * device has entered the correct state.
1253 */
1254 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1255 rt73usb_register_read(rt2x00dev, MAC_CSR12, &reg);
1256 current_state =
1257 rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
1258 if (current_state == !put_to_sleep)
1259 return 0;
1260 msleep(10);
1261 }
1262
1263 NOTICE(rt2x00dev, "Device failed to enter state %d, "
1264 "current device state %d.\n", !put_to_sleep, current_state);
1265
1266 return -EBUSY;
1267}
1268
1269static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1270 enum dev_state state)
1271{
1272 int retval = 0;
1273
1274 switch (state) {
1275 case STATE_RADIO_ON:
1276 retval = rt73usb_enable_radio(rt2x00dev);
1277 break;
1278 case STATE_RADIO_OFF:
1279 rt73usb_disable_radio(rt2x00dev);
1280 break;
1281 case STATE_RADIO_RX_ON:
1282 case STATE_RADIO_RX_OFF:
1283 rt73usb_toggle_rx(rt2x00dev, state);
1284 break;
1285 case STATE_DEEP_SLEEP:
1286 case STATE_SLEEP:
1287 case STATE_STANDBY:
1288 case STATE_AWAKE:
1289 retval = rt73usb_set_state(rt2x00dev, state);
1290 break;
1291 default:
1292 retval = -ENOTSUPP;
1293 break;
1294 }
1295
1296 return retval;
1297}
1298
1299/*
1300 * TX descriptor initialization
1301 */
1302static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1303 struct data_desc *txd,
1304 struct data_entry_desc *desc,
1305 struct ieee80211_hdr *ieee80211hdr,
1306 unsigned int length,
1307 struct ieee80211_tx_control *control)
1308{
1309 u32 word;
1310
1311 /*
1312 * Start writing the descriptor words.
1313 */
1314 rt2x00_desc_read(txd, 1, &word);
1315 rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue);
1316 rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs);
1317 rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
1318 rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
1319 rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1320 rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
1321 rt2x00_desc_write(txd, 1, word);
1322
1323 rt2x00_desc_read(txd, 2, &word);
1324 rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
1325 rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
1326 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
1327 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
1328 rt2x00_desc_write(txd, 2, word);
1329
1330 rt2x00_desc_read(txd, 5, &word);
1331 rt2x00_set_field32(&word, TXD_W5_TX_POWER,
1332 TXPOWER_TO_DEV(control->power_level));
1333 rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1334 rt2x00_desc_write(txd, 5, word);
1335
1336 rt2x00_desc_read(txd, 0, &word);
1337 rt2x00_set_field32(&word, TXD_W0_BURST,
1338 test_bit(ENTRY_TXD_BURST, &desc->flags));
1339 rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1340 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1341 test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1342 rt2x00_set_field32(&word, TXD_W0_ACK,
1343 !(control->flags & IEEE80211_TXCTL_NO_ACK));
1344 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1345 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1346 rt2x00_set_field32(&word, TXD_W0_OFDM,
1347 test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
1348 rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1349 rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1350 !!(control->flags &
1351 IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1352 rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
1353 rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
1354 rt2x00_set_field32(&word, TXD_W0_BURST2,
1355 test_bit(ENTRY_TXD_BURST, &desc->flags));
1356 rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1357 rt2x00_desc_write(txd, 0, word);
1358}
1359
1360/*
1361 * TX data initialization
1362 */
1363static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1364 unsigned int queue)
1365{
1366 u32 reg;
1367
1368 if (queue != IEEE80211_TX_QUEUE_BEACON)
1369 return;
1370
1371 /*
1372 * For Wi-Fi faily generated beacons between participating stations.
1373 * Set TBTT phase adaptive adjustment step to 8us (default 16us)
1374 */
1375 rt73usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
1376
1377 rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
1378 if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
1379 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
1380 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1381 }
1382}
1383
1384/*
1385 * RX control handlers
1386 */
1387static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1388{
1389 u16 eeprom;
1390 u8 offset;
1391 u8 lna;
1392
1393 lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1394 switch (lna) {
1395 case 3:
1396 offset = 90;
1397 break;
1398 case 2:
1399 offset = 74;
1400 break;
1401 case 1:
1402 offset = 64;
1403 break;
1404 default:
1405 return 0;
1406 }
1407
1408 if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
1409 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
1410 if (lna == 3 || lna == 2)
1411 offset += 10;
1412 } else {
1413 if (lna == 3)
1414 offset += 6;
1415 else if (lna == 2)
1416 offset += 8;
1417 }
1418
1419 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
1420 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
1421 } else {
1422 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
1423 offset += 14;
1424
1425 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
1426 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
1427 }
1428
1429 return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1430}
1431
1432static int rt73usb_fill_rxdone(struct data_entry *entry,
1433 int *signal, int *rssi, int *ofdm, int *size)
1434{
1435 struct data_desc *rxd = (struct data_desc *)entry->skb->data;
1436 u32 word0;
1437 u32 word1;
1438
1439 rt2x00_desc_read(rxd, 0, &word0);
1440 rt2x00_desc_read(rxd, 1, &word1);
1441
1442 if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
1443 rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
1444 return -EINVAL;
1445
1446 /*
1447 * Obtain the status about this packet.
1448 */
1449 *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1450 *rssi = rt73usb_agc_to_rssi(entry->ring->rt2x00dev, word1);
1451 *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1452 *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1453
1454 /*
1455 * Pull the skb to clear the descriptor area.
1456 */
1457 skb_pull(entry->skb, entry->ring->desc_size);
1458
1459 return 0;
1460}
1461
1462/*
1463 * Device probe functions.
1464 */
1465static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1466{
1467 u16 word;
1468 u8 *mac;
1469 s8 value;
1470
1471 rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1472
1473 /*
1474 * Start validation of the data that has been read.
1475 */
1476 mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1477 if (!is_valid_ether_addr(mac)) {
Joe Perches0795af52007-10-03 17:59:30 -07001478 DECLARE_MAC_BUF(macbuf);
1479
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001480 random_ether_addr(mac);
Joe Perches0795af52007-10-03 17:59:30 -07001481 EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001482 }
1483
1484 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1485 if (word == 0xffff) {
1486 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1487 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 2);
1488 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 2);
1489 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
1490 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1491 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1492 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226);
1493 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1494 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1495 }
1496
1497 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1498 if (word == 0xffff) {
1499 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0);
1500 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1501 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1502 }
1503
1504 rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
1505 if (word == 0xffff) {
1506 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0);
1507 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0);
1508 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0);
1509 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0);
1510 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0);
1511 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0);
1512 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0);
1513 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0);
1514 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
1515 LED_MODE_DEFAULT);
1516 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
1517 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
1518 }
1519
1520 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
1521 if (word == 0xffff) {
1522 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
1523 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
1524 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
1525 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
1526 }
1527
1528 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
1529 if (word == 0xffff) {
1530 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1531 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1532 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1533 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1534 } else {
1535 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
1536 if (value < -10 || value > 10)
1537 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1538 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
1539 if (value < -10 || value > 10)
1540 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1541 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1542 }
1543
1544 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
1545 if (word == 0xffff) {
1546 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1547 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1548 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1549 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1550 } else {
1551 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
1552 if (value < -10 || value > 10)
1553 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1554 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
1555 if (value < -10 || value > 10)
1556 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1557 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1558 }
1559
1560 return 0;
1561}
1562
1563static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1564{
1565 u32 reg;
1566 u16 value;
1567 u16 eeprom;
1568
1569 /*
1570 * Read EEPROM word for configuration.
1571 */
1572 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1573
1574 /*
1575 * Identify RF chipset.
1576 */
1577 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1578 rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1579 rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
1580
1581 if (!rt2x00_rev(&rt2x00dev->chip, 0x25730)) {
1582 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1583 return -ENODEV;
1584 }
1585
1586 if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
1587 !rt2x00_rf(&rt2x00dev->chip, RF2528) &&
1588 !rt2x00_rf(&rt2x00dev->chip, RF5225) &&
1589 !rt2x00_rf(&rt2x00dev->chip, RF2527)) {
1590 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1591 return -ENODEV;
1592 }
1593
1594 /*
1595 * Identify default antenna configuration.
1596 */
1597 rt2x00dev->hw->conf.antenna_sel_tx =
1598 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1599 rt2x00dev->hw->conf.antenna_sel_rx =
1600 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1601
1602 /*
1603 * Read the Frame type.
1604 */
1605 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
1606 __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
1607
1608 /*
1609 * Read frequency offset.
1610 */
1611 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
1612 rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
1613
1614 /*
1615 * Read external LNA informations.
1616 */
1617 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1618
1619 if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) {
1620 __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
1621 __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
1622 }
1623
1624 /*
1625 * Store led settings, for correct led behaviour.
1626 */
1627 rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
1628
1629 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE,
1630 rt2x00dev->led_mode);
1631 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0,
1632 rt2x00_get_field16(eeprom,
1633 EEPROM_LED_POLARITY_GPIO_0));
1634 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1,
1635 rt2x00_get_field16(eeprom,
1636 EEPROM_LED_POLARITY_GPIO_1));
1637 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2,
1638 rt2x00_get_field16(eeprom,
1639 EEPROM_LED_POLARITY_GPIO_2));
1640 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3,
1641 rt2x00_get_field16(eeprom,
1642 EEPROM_LED_POLARITY_GPIO_3));
1643 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4,
1644 rt2x00_get_field16(eeprom,
1645 EEPROM_LED_POLARITY_GPIO_4));
1646 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT,
1647 rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
1648 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG,
1649 rt2x00_get_field16(eeprom,
1650 EEPROM_LED_POLARITY_RDY_G));
1651 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A,
1652 rt2x00_get_field16(eeprom,
1653 EEPROM_LED_POLARITY_RDY_A));
1654
1655 return 0;
1656}
1657
1658/*
1659 * RF value list for RF2528
1660 * Supports: 2.4 GHz
1661 */
1662static const struct rf_channel rf_vals_bg_2528[] = {
1663 { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1664 { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1665 { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1666 { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1667 { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1668 { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1669 { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1670 { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1671 { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1672 { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1673 { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1674 { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1675 { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1676 { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1677};
1678
1679/*
1680 * RF value list for RF5226
1681 * Supports: 2.4 GHz & 5.2 GHz
1682 */
1683static const struct rf_channel rf_vals_5226[] = {
1684 { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1685 { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1686 { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1687 { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1688 { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1689 { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1690 { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1691 { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1692 { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1693 { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1694 { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1695 { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1696 { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1697 { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1698
1699 /* 802.11 UNI / HyperLan 2 */
1700 { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 },
1701 { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 },
1702 { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b },
1703 { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 },
1704 { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b },
1705 { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 },
1706 { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 },
1707 { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b },
1708
1709 /* 802.11 HyperLan 2 */
1710 { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 },
1711 { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b },
1712 { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 },
1713 { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b },
1714 { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 },
1715 { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 },
1716 { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b },
1717 { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 },
1718 { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b },
1719 { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 },
1720
1721 /* 802.11 UNII */
1722 { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 },
1723 { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f },
1724 { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 },
1725 { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 },
1726 { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f },
1727 { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 },
1728
1729 /* MMAC(Japan)J52 ch 34,38,42,46 */
1730 { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b },
1731 { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 },
1732 { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b },
1733 { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 },
1734};
1735
1736/*
1737 * RF value list for RF5225 & RF2527
1738 * Supports: 2.4 GHz & 5.2 GHz
1739 */
1740static const struct rf_channel rf_vals_5225_2527[] = {
1741 { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
1742 { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
1743 { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
1744 { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
1745 { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
1746 { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
1747 { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
1748 { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
1749 { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
1750 { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
1751 { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
1752 { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
1753 { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
1754 { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
1755
1756 /* 802.11 UNI / HyperLan 2 */
1757 { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
1758 { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
1759 { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
1760 { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
1761 { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
1762 { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
1763 { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
1764 { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
1765
1766 /* 802.11 HyperLan 2 */
1767 { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
1768 { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
1769 { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
1770 { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
1771 { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
1772 { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
1773 { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
1774 { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
1775 { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
1776 { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
1777
1778 /* 802.11 UNII */
1779 { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
1780 { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
1781 { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
1782 { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
1783 { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
1784 { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
1785
1786 /* MMAC(Japan)J52 ch 34,38,42,46 */
1787 { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
1788 { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
1789 { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
1790 { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
1791};
1792
1793
1794static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1795{
1796 struct hw_mode_spec *spec = &rt2x00dev->spec;
1797 u8 *txpower;
1798 unsigned int i;
1799
1800 /*
1801 * Initialize all hw fields.
1802 */
1803 rt2x00dev->hw->flags =
1804 IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
1805 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1806 IEEE80211_HW_MONITOR_DURING_OPER |
1807 IEEE80211_HW_NO_PROBE_FILTERING;
1808 rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1809 rt2x00dev->hw->max_signal = MAX_SIGNAL;
1810 rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1811 rt2x00dev->hw->queues = 5;
1812
1813 SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
1814 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1815 rt2x00_eeprom_addr(rt2x00dev,
1816 EEPROM_MAC_ADDR_0));
1817
1818 /*
1819 * Convert tx_power array in eeprom.
1820 */
1821 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
1822 for (i = 0; i < 14; i++)
1823 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1824
1825 /*
1826 * Initialize hw_mode information.
1827 */
1828 spec->num_modes = 2;
1829 spec->num_rates = 12;
1830 spec->tx_power_a = NULL;
1831 spec->tx_power_bg = txpower;
1832 spec->tx_power_default = DEFAULT_TXPOWER;
1833
1834 if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
1835 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
1836 spec->channels = rf_vals_bg_2528;
1837 } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
1838 spec->num_channels = ARRAY_SIZE(rf_vals_5226);
1839 spec->channels = rf_vals_5226;
1840 } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
1841 spec->num_channels = 14;
1842 spec->channels = rf_vals_5225_2527;
1843 } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
1844 spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
1845 spec->channels = rf_vals_5225_2527;
1846 }
1847
1848 if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
1849 rt2x00_rf(&rt2x00dev->chip, RF5226)) {
1850 spec->num_modes = 3;
1851
1852 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
1853 for (i = 0; i < 14; i++)
1854 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1855
1856 spec->tx_power_a = txpower;
1857 }
1858}
1859
1860static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1861{
1862 int retval;
1863
1864 /*
1865 * Allocate eeprom data.
1866 */
1867 retval = rt73usb_validate_eeprom(rt2x00dev);
1868 if (retval)
1869 return retval;
1870
1871 retval = rt73usb_init_eeprom(rt2x00dev);
1872 if (retval)
1873 return retval;
1874
1875 /*
1876 * Initialize hw specifications.
1877 */
1878 rt73usb_probe_hw_mode(rt2x00dev);
1879
1880 /*
1881 * USB devices require scheduled packet filter toggling
1882 * This device requires firmware
1883 */
1884 __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags);
1885 __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags);
1886
1887 /*
1888 * Set the rssi offset.
1889 */
1890 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1891
1892 return 0;
1893}
1894
1895/*
1896 * IEEE80211 stack callback functions.
1897 */
1898static int rt73usb_set_retry_limit(struct ieee80211_hw *hw,
1899 u32 short_retry, u32 long_retry)
1900{
1901 struct rt2x00_dev *rt2x00dev = hw->priv;
1902 u32 reg;
1903
1904 rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
1905 rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry);
1906 rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry);
1907 rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
1908
1909 return 0;
1910}
1911
1912#if 0
1913/*
1914 * Mac80211 demands get_tsf must be atomic.
1915 * This is not possible for rt73usb since all register access
1916 * functions require sleeping. Untill mac80211 no longer needs
1917 * get_tsf to be atomic, this function should be disabled.
1918 */
1919static u64 rt73usb_get_tsf(struct ieee80211_hw *hw)
1920{
1921 struct rt2x00_dev *rt2x00dev = hw->priv;
1922 u64 tsf;
1923 u32 reg;
1924
1925 rt73usb_register_read(rt2x00dev, TXRX_CSR13, &reg);
1926 tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
1927 rt73usb_register_read(rt2x00dev, TXRX_CSR12, &reg);
1928 tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
1929
1930 return tsf;
1931}
1932#endif
1933
1934static void rt73usb_reset_tsf(struct ieee80211_hw *hw)
1935{
1936 struct rt2x00_dev *rt2x00dev = hw->priv;
1937
1938 rt73usb_register_write(rt2x00dev, TXRX_CSR12, 0);
1939 rt73usb_register_write(rt2x00dev, TXRX_CSR13, 0);
1940}
1941
1942int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
1943 struct ieee80211_tx_control *control)
1944{
1945 struct rt2x00_dev *rt2x00dev = hw->priv;
1946 int timeout;
1947
1948 /*
1949 * Just in case the ieee80211 doesn't set this,
1950 * but we need this queue set for the descriptor
1951 * initialization.
1952 */
1953 control->queue = IEEE80211_TX_QUEUE_BEACON;
1954
1955 /*
1956 * First we create the beacon.
1957 */
1958 skb_push(skb, TXD_DESC_SIZE);
1959 rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
1960 (struct ieee80211_hdr *)(skb->data +
1961 TXD_DESC_SIZE),
1962 skb->len - TXD_DESC_SIZE, control);
1963
1964 /*
1965 * Write entire beacon with descriptor to register,
1966 * and kick the beacon generator.
1967 */
1968 timeout = REGISTER_TIMEOUT * (skb->len / sizeof(u32));
1969 rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
1970 USB_VENDOR_REQUEST_OUT,
1971 HW_BEACON_BASE0, 0x0000,
1972 skb->data, skb->len, timeout);
1973 rt73usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1974
1975 return 0;
1976}
1977
1978static const struct ieee80211_ops rt73usb_mac80211_ops = {
1979 .tx = rt2x00mac_tx,
1980 .add_interface = rt2x00mac_add_interface,
1981 .remove_interface = rt2x00mac_remove_interface,
1982 .config = rt2x00mac_config,
1983 .config_interface = rt2x00mac_config_interface,
1984 .set_multicast_list = rt2x00mac_set_multicast_list,
1985 .get_stats = rt2x00mac_get_stats,
1986 .set_retry_limit = rt73usb_set_retry_limit,
1987 .conf_tx = rt2x00mac_conf_tx,
1988 .get_tx_stats = rt2x00mac_get_tx_stats,
1989#if 0
1990/*
1991 * See comment at the rt73usb_get_tsf function.
1992 */
1993 .get_tsf = rt73usb_get_tsf,
1994#endif
1995 .reset_tsf = rt73usb_reset_tsf,
1996 .beacon_update = rt73usb_beacon_update,
1997};
1998
1999static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
2000 .probe_hw = rt73usb_probe_hw,
2001 .get_firmware_name = rt73usb_get_firmware_name,
2002 .load_firmware = rt73usb_load_firmware,
2003 .initialize = rt2x00usb_initialize,
2004 .uninitialize = rt2x00usb_uninitialize,
2005 .set_device_state = rt73usb_set_device_state,
2006 .link_stats = rt73usb_link_stats,
2007 .reset_tuner = rt73usb_reset_tuner,
2008 .link_tuner = rt73usb_link_tuner,
2009 .write_tx_desc = rt73usb_write_tx_desc,
2010 .write_tx_data = rt2x00usb_write_tx_data,
2011 .kick_tx_queue = rt73usb_kick_tx_queue,
2012 .fill_rxdone = rt73usb_fill_rxdone,
2013 .config_mac_addr = rt73usb_config_mac_addr,
2014 .config_bssid = rt73usb_config_bssid,
2015 .config_packet_filter = rt73usb_config_packet_filter,
2016 .config_type = rt73usb_config_type,
2017 .config = rt73usb_config,
2018};
2019
2020static const struct rt2x00_ops rt73usb_ops = {
2021 .name = DRV_NAME,
2022 .rxd_size = RXD_DESC_SIZE,
2023 .txd_size = TXD_DESC_SIZE,
2024 .eeprom_size = EEPROM_SIZE,
2025 .rf_size = RF_SIZE,
2026 .lib = &rt73usb_rt2x00_ops,
2027 .hw = &rt73usb_mac80211_ops,
2028#ifdef CONFIG_RT2X00_LIB_DEBUGFS
2029 .debugfs = &rt73usb_rt2x00debug,
2030#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2031};
2032
2033/*
2034 * rt73usb module information.
2035 */
2036static struct usb_device_id rt73usb_device_table[] = {
2037 /* AboCom */
2038 { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
2039 /* Askey */
2040 { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
2041 /* ASUS */
2042 { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) },
2043 { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) },
2044 /* Belkin */
2045 { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) },
2046 { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) },
2047 { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
2048 /* Billionton */
2049 { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
2050 /* Buffalo */
2051 { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
2052 /* CNet */
2053 { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
2054 { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
2055 /* Conceptronic */
2056 { USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) },
2057 /* D-Link */
2058 { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
2059 { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
2060 /* Gemtek */
2061 { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
2062 /* Gigabyte */
2063 { USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops) },
2064 { USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops) },
2065 /* Huawei-3Com */
2066 { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) },
2067 /* Hercules */
2068 { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) },
2069 { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) },
2070 /* Linksys */
2071 { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
2072 { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
2073 /* MSI */
2074 { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
2075 { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
2076 { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
2077 { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
2078 /* Ralink */
2079 { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
2080 { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
2081 /* Qcom */
2082 { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
2083 { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
2084 { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
2085 /* Senao */
2086 { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
2087 /* Sitecom */
2088 { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
2089 { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
2090 /* Surecom */
2091 { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
2092 /* Planex */
2093 { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
2094 { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
2095 { 0, }
2096};
2097
2098MODULE_AUTHOR(DRV_PROJECT);
2099MODULE_VERSION(DRV_VERSION);
2100MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver.");
2101MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards");
2102MODULE_DEVICE_TABLE(usb, rt73usb_device_table);
2103MODULE_FIRMWARE(FIRMWARE_RT2571);
2104MODULE_LICENSE("GPL");
2105
2106static struct usb_driver rt73usb_driver = {
2107 .name = DRV_NAME,
2108 .id_table = rt73usb_device_table,
2109 .probe = rt2x00usb_probe,
2110 .disconnect = rt2x00usb_disconnect,
2111 .suspend = rt2x00usb_suspend,
2112 .resume = rt2x00usb_resume,
2113};
2114
2115static int __init rt73usb_init(void)
2116{
2117 return usb_register(&rt73usb_driver);
2118}
2119
2120static void __exit rt73usb_exit(void)
2121{
2122 usb_deregister(&rt73usb_driver);
2123}
2124
2125module_init(rt73usb_init);
2126module_exit(rt73usb_exit);