blob: 14175cdb9c9c837ab097e915c7415cf3d1ae0b8d [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Frame buffer driver for Trident Blade and Image series
3 *
4 * Copyright 2001,2002 - Jani Monoses <jani@iv.ro>
5 *
6 *
7 * CREDITS:(in order of appearance)
8 * skeletonfb.c by Geert Uytterhoeven and other fb code in drivers/video
9 * Special thanks ;) to Mattia Crivellini <tia@mclink.it>
10 * much inspired by the XFree86 4.x Trident driver sources by Alan Hourihane
11 * the FreeVGA project
12 * Francesco Salvestrini <salvestrini@users.sf.net> XP support,code,suggestions
13 * TODO:
14 * timing value tweaking so it looks good on every monitor in every mode
15 * TGUI acceleration
16 */
17
Linus Torvalds1da177e2005-04-16 15:20:36 -070018#include <linux/module.h>
19#include <linux/fb.h>
20#include <linux/init.h>
21#include <linux/pci.h>
22
23#include <linux/delay.h>
24#include <video/trident.h>
25
26#define VERSION "0.7.8-NEWAPI"
27
28struct tridentfb_par {
29 int vclk; //in MHz
30 void __iomem * io_virt; //iospace virtual memory address
31};
32
33static unsigned char eng_oper; //engine operation...
34static struct fb_ops tridentfb_ops;
35
36static struct tridentfb_par default_par;
37
38/* FIXME:kmalloc these 3 instead */
39static struct fb_info fb_info;
40static u32 pseudo_pal[16];
41
42
43static struct fb_var_screeninfo default_var;
44
45static struct fb_fix_screeninfo tridentfb_fix = {
46 .id = "Trident",
47 .type = FB_TYPE_PACKED_PIXELS,
48 .ypanstep = 1,
49 .visual = FB_VISUAL_PSEUDOCOLOR,
50 .accel = FB_ACCEL_NONE,
51};
52
53static int chip_id;
54
55static int defaultaccel;
56static int displaytype;
57
58
59/* defaults which are normally overriden by user values */
60
61/* video mode */
62static char * mode = "640x480";
63static int bpp = 8;
64
65static int noaccel;
66
67static int center;
68static int stretch;
69
70static int fp;
71static int crt;
72
73static int memsize;
74static int memdiff;
75static int nativex;
76
77
78module_param(mode, charp, 0);
79module_param(bpp, int, 0);
80module_param(center, int, 0);
81module_param(stretch, int, 0);
82module_param(noaccel, int, 0);
83module_param(memsize, int, 0);
84module_param(memdiff, int, 0);
85module_param(nativex, int, 0);
86module_param(fp, int, 0);
87module_param(crt, int, 0);
88
89
90static int chip3D;
91static int chipcyber;
92
93static int is3Dchip(int id)
94{
95 return ((id == BLADE3D) || (id == CYBERBLADEE4) ||
96 (id == CYBERBLADEi7) || (id == CYBERBLADEi7D) ||
97 (id == CYBER9397) || (id == CYBER9397DVD) ||
98 (id == CYBER9520) || (id == CYBER9525DVD) ||
99 (id == IMAGE975) || (id == IMAGE985) ||
100 (id == CYBERBLADEi1) || (id == CYBERBLADEi1D) ||
101 (id == CYBERBLADEAi1) || (id == CYBERBLADEAi1D) ||
102 (id == CYBERBLADEXPm8) || (id == CYBERBLADEXPm16) ||
103 (id == CYBERBLADEXPAi1));
104}
105
106static int iscyber(int id)
107{
108 switch (id) {
109 case CYBER9388:
110 case CYBER9382:
111 case CYBER9385:
112 case CYBER9397:
113 case CYBER9397DVD:
114 case CYBER9520:
115 case CYBER9525DVD:
116 case CYBERBLADEE4:
117 case CYBERBLADEi7D:
118 case CYBERBLADEi1:
119 case CYBERBLADEi1D:
120 case CYBERBLADEAi1:
121 case CYBERBLADEAi1D:
122 case CYBERBLADEXPAi1:
123 return 1;
124
125 case CYBER9320:
126 case TGUI9660:
127 case IMAGE975:
128 case IMAGE985:
129 case BLADE3D:
130 case CYBERBLADEi7: /* VIA MPV4 integrated version */
131
132 default:
133 /* case CYBERBLDAEXPm8: Strange */
134 /* case CYBERBLDAEXPm16: Strange */
135 return 0;
136 }
137}
138
139#define CRT 0x3D0 //CRTC registers offset for color display
140
141#ifndef TRIDENT_MMIO
142 #define TRIDENT_MMIO 1
143#endif
144
145#if TRIDENT_MMIO
146 #define t_outb(val,reg) writeb(val,((struct tridentfb_par *)(fb_info.par))->io_virt + reg)
147 #define t_inb(reg) readb(((struct tridentfb_par*)(fb_info.par))->io_virt + reg)
148#else
149 #define t_outb(val,reg) outb(val,reg)
150 #define t_inb(reg) inb(reg)
151#endif
152
153
154static struct accel_switch {
155 void (*init_accel)(int,int);
156 void (*wait_engine)(void);
157 void (*fill_rect)(__u32,__u32,__u32,__u32,__u32,__u32);
158 void (*copy_rect)(__u32,__u32,__u32,__u32,__u32,__u32);
159} *acc;
160
161#define writemmr(r,v) writel(v, ((struct tridentfb_par *)fb_info.par)->io_virt + r)
162#define readmmr(r) readl(((struct tridentfb_par *)fb_info.par)->io_virt + r)
163
164
165
166/*
167 * Blade specific acceleration.
168 */
169
170#define point(x,y) ((y)<<16|(x))
171#define STA 0x2120
172#define CMD 0x2144
173#define ROP 0x2148
174#define CLR 0x2160
175#define SR1 0x2100
176#define SR2 0x2104
177#define DR1 0x2108
178#define DR2 0x210C
179
180#define ROP_S 0xCC
181
182static void blade_init_accel(int pitch,int bpp)
183{
184 int v1 = (pitch>>3)<<20;
185 int tmp = 0,v2;
186 switch (bpp) {
187 case 8:tmp = 0;break;
188 case 15:tmp = 5;break;
189 case 16:tmp = 1;break;
190 case 24:
191 case 32:tmp = 2;break;
192 }
193 v2 = v1 | (tmp<<29);
194 writemmr(0x21C0,v2);
195 writemmr(0x21C4,v2);
196 writemmr(0x21B8,v2);
197 writemmr(0x21BC,v2);
198 writemmr(0x21D0,v1);
199 writemmr(0x21D4,v1);
200 writemmr(0x21C8,v1);
201 writemmr(0x21CC,v1);
202 writemmr(0x216C,0);
203}
204
205static void blade_wait_engine(void)
206{
207 while(readmmr(STA) & 0xFA800000);
208}
209
210static void blade_fill_rect(__u32 x,__u32 y,__u32 w,__u32 h,__u32 c,__u32 rop)
211{
212 writemmr(CLR,c);
213 writemmr(ROP,rop ? 0x66:ROP_S);
214 writemmr(CMD,0x20000000|1<<19|1<<4|2<<2);
215
216 writemmr(DR1,point(x,y));
217 writemmr(DR2,point(x+w-1,y+h-1));
218}
219
220static void blade_copy_rect(__u32 x1,__u32 y1,__u32 x2,__u32 y2,__u32 w,__u32 h)
221{
222 __u32 s1,s2,d1,d2;
223 int direction = 2;
224 s1 = point(x1,y1);
225 s2 = point(x1+w-1,y1+h-1);
226 d1 = point(x2,y2);
227 d2 = point(x2+w-1,y2+h-1);
228
229 if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
230 direction = 0;
231
232
233 writemmr(ROP,ROP_S);
234 writemmr(CMD,0xE0000000|1<<19|1<<4|1<<2|direction);
235
236 writemmr(SR1,direction?s2:s1);
237 writemmr(SR2,direction?s1:s2);
238 writemmr(DR1,direction?d2:d1);
239 writemmr(DR2,direction?d1:d2);
240}
241
242static struct accel_switch accel_blade = {
243 blade_init_accel,
244 blade_wait_engine,
245 blade_fill_rect,
246 blade_copy_rect,
247};
248
249
250/*
251 * BladeXP specific acceleration functions
252 */
253
254#define ROP_P 0xF0
255#define masked_point(x,y) ((y & 0xffff)<<16|(x & 0xffff))
256
257static void xp_init_accel(int pitch,int bpp)
258{
259 int tmp = 0,v1;
260 unsigned char x = 0;
261
262 switch (bpp) {
263 case 8: x = 0; break;
264 case 16: x = 1; break;
265 case 24: x = 3; break;
266 case 32: x = 2; break;
267 }
268
269 switch (pitch << (bpp >> 3)) {
270 case 8192:
271 case 512: x |= 0x00; break;
272 case 1024: x |= 0x04; break;
273 case 2048: x |= 0x08; break;
274 case 4096: x |= 0x0C; break;
275 }
276
277 t_outb(x,0x2125);
278
279 eng_oper = x | 0x40;
280
281 switch (bpp) {
282 case 8: tmp = 18; break;
283 case 15:
284 case 16: tmp = 19; break;
285 case 24:
286 case 32: tmp = 20; break;
287 }
288
289 v1 = pitch << tmp;
290
291 writemmr(0x2154,v1);
292 writemmr(0x2150,v1);
293 t_outb(3,0x2126);
294}
295
296static void xp_wait_engine(void)
297{
298 int busy;
299 int count, timeout;
300
301 count = 0;
302 timeout = 0;
303 for (;;) {
304 busy = t_inb(STA) & 0x80;
305 if (busy != 0x80)
306 return;
307 count++;
308 if (count == 10000000) {
309 /* Timeout */
310 count = 9990000;
311 timeout++;
312 if (timeout == 8) {
313 /* Reset engine */
314 t_outb(0x00, 0x2120);
315 return;
316 }
317 }
318 }
319}
320
321static void xp_fill_rect(__u32 x,__u32 y,__u32 w,__u32 h,__u32 c,__u32 rop)
322{
323 writemmr(0x2127,ROP_P);
324 writemmr(0x2158,c);
325 writemmr(0x2128,0x4000);
326 writemmr(0x2140,masked_point(h,w));
327 writemmr(0x2138,masked_point(y,x));
328 t_outb(0x01,0x2124);
329 t_outb(eng_oper,0x2125);
330}
331
332static void xp_copy_rect(__u32 x1,__u32 y1,__u32 x2,__u32 y2,__u32 w,__u32 h)
333{
334 int direction;
335 __u32 x1_tmp, x2_tmp, y1_tmp, y2_tmp;
336
337 direction = 0x0004;
338
339 if ((x1 < x2) && (y1 == y2)) {
340 direction |= 0x0200;
341 x1_tmp = x1 + w - 1;
342 x2_tmp = x2 + w - 1;
343 } else {
344 x1_tmp = x1;
345 x2_tmp = x2;
346 }
347
348 if (y1 < y2) {
349 direction |= 0x0100;
350 y1_tmp = y1 + h - 1;
351 y2_tmp = y2 + h - 1;
352 } else {
353 y1_tmp = y1;
354 y2_tmp = y2;
355 }
356
357 writemmr(0x2128,direction);
358 t_outb(ROP_S,0x2127);
359 writemmr(0x213C,masked_point(y1_tmp,x1_tmp));
360 writemmr(0x2138,masked_point(y2_tmp,x2_tmp));
361 writemmr(0x2140,masked_point(h,w));
362 t_outb(0x01,0x2124);
363}
364
365static struct accel_switch accel_xp = {
366 xp_init_accel,
367 xp_wait_engine,
368 xp_fill_rect,
369 xp_copy_rect,
370};
371
372
373/*
374 * Image specific acceleration functions
375 */
376static void image_init_accel(int pitch,int bpp)
377{
378 int tmp = 0;
379 switch (bpp) {
380 case 8:tmp = 0;break;
381 case 15:tmp = 5;break;
382 case 16:tmp = 1;break;
383 case 24:
384 case 32:tmp = 2;break;
385 }
386 writemmr(0x2120, 0xF0000000);
387 writemmr(0x2120, 0x40000000|tmp);
388 writemmr(0x2120, 0x80000000);
389 writemmr(0x2144, 0x00000000);
390 writemmr(0x2148, 0x00000000);
391 writemmr(0x2150, 0x00000000);
392 writemmr(0x2154, 0x00000000);
393 writemmr(0x2120, 0x60000000|(pitch<<16) |pitch);
394 writemmr(0x216C, 0x00000000);
395 writemmr(0x2170, 0x00000000);
396 writemmr(0x217C, 0x00000000);
397 writemmr(0x2120, 0x10000000);
398 writemmr(0x2130, (2047 << 16) | 2047);
399}
400
401static void image_wait_engine(void)
402{
403 while(readmmr(0x2164) & 0xF0000000);
404}
405
406static void image_fill_rect(__u32 x, __u32 y, __u32 w, __u32 h, __u32 c, __u32 rop)
407{
408 writemmr(0x2120,0x80000000);
409 writemmr(0x2120,0x90000000|ROP_S);
410
411 writemmr(0x2144,c);
412
413 writemmr(DR1,point(x,y));
414 writemmr(DR2,point(x+w-1,y+h-1));
415
416 writemmr(0x2124,0x80000000|3<<22|1<<10|1<<9);
417}
418
419static void image_copy_rect(__u32 x1,__u32 y1,__u32 x2,__u32 y2,__u32 w,__u32 h)
420{
421 __u32 s1,s2,d1,d2;
422 int direction = 2;
423 s1 = point(x1,y1);
424 s2 = point(x1+w-1,y1+h-1);
425 d1 = point(x2,y2);
426 d2 = point(x2+w-1,y2+h-1);
427
428 if ((y1 > y2) || ((y1 == y2) && (x1 >x2)))
429 direction = 0;
430
431 writemmr(0x2120,0x80000000);
432 writemmr(0x2120,0x90000000|ROP_S);
433
434 writemmr(SR1,direction?s2:s1);
435 writemmr(SR2,direction?s1:s2);
436 writemmr(DR1,direction?d2:d1);
437 writemmr(DR2,direction?d1:d2);
438 writemmr(0x2124,0x80000000|1<<22|1<<10|1<<7|direction);
439}
440
441
442static struct accel_switch accel_image = {
443 image_init_accel,
444 image_wait_engine,
445 image_fill_rect,
446 image_copy_rect,
447};
448
449/*
450 * Accel functions called by the upper layers
451 */
452#ifdef CONFIG_FB_TRIDENT_ACCEL
453static void tridentfb_fillrect(struct fb_info * info, const struct fb_fillrect *fr)
454{
455 int bpp = info->var.bits_per_pixel;
Antonino A. Daplas8dad46c2005-08-01 23:46:44 +0800456 int col = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700457
458 switch (bpp) {
459 default:
Antonino A. Daplas8dad46c2005-08-01 23:46:44 +0800460 case 8: col |= fr->color;
461 col |= col << 8;
462 col |= col << 16;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700463 break;
464 case 16: col = ((u32 *)(info->pseudo_palette))[fr->color];
Antonino A. Daplas8dad46c2005-08-01 23:46:44 +0800465
Linus Torvalds1da177e2005-04-16 15:20:36 -0700466 break;
467 case 32: col = ((u32 *)(info->pseudo_palette))[fr->color];
468 break;
469 }
470
471 acc->fill_rect(fr->dx, fr->dy, fr->width, fr->height, col, fr->rop);
472 acc->wait_engine();
473}
474static void tridentfb_copyarea(struct fb_info *info, const struct fb_copyarea *ca)
475{
476 acc->copy_rect(ca->sx,ca->sy,ca->dx,ca->dy,ca->width,ca->height);
477 acc->wait_engine();
478}
479#else /* !CONFIG_FB_TRIDENT_ACCEL */
480#define tridentfb_fillrect cfb_fillrect
481#define tridentfb_copyarea cfb_copyarea
482#endif /* CONFIG_FB_TRIDENT_ACCEL */
483
484
485/*
486 * Hardware access functions
487 */
488
489static inline unsigned char read3X4(int reg)
490{
491 struct tridentfb_par * par = (struct tridentfb_par *)fb_info.par;
492 writeb(reg, par->io_virt + CRT + 4);
493 return readb( par->io_virt + CRT + 5);
494}
495
496static inline void write3X4(int reg, unsigned char val)
497{
498 struct tridentfb_par * par = (struct tridentfb_par *)fb_info.par;
499 writeb(reg, par->io_virt + CRT + 4);
500 writeb(val, par->io_virt + CRT + 5);
501}
502
503static inline unsigned char read3C4(int reg)
504{
505 t_outb(reg, 0x3C4);
506 return t_inb(0x3C5);
507}
508
509static inline void write3C4(int reg, unsigned char val)
510{
511 t_outb(reg, 0x3C4);
512 t_outb(val, 0x3C5);
513}
514
515static inline unsigned char read3CE(int reg)
516{
517 t_outb(reg, 0x3CE);
518 return t_inb(0x3CF);
519}
520
521static inline void writeAttr(int reg, unsigned char val)
522{
523 readb(((struct tridentfb_par *)fb_info.par)->io_virt + CRT + 0x0A); //flip-flop to index
524 t_outb(reg, 0x3C0);
525 t_outb(val, 0x3C0);
526}
527
528static inline void write3CE(int reg, unsigned char val)
529{
530 t_outb(reg, 0x3CE);
531 t_outb(val, 0x3CF);
532}
533
534static inline void enable_mmio(void)
535{
536 /* Goto New Mode */
537 outb(0x0B, 0x3C4);
538 inb(0x3C5);
539
540 /* Unprotect registers */
541 outb(NewMode1, 0x3C4);
542 outb(0x80, 0x3C5);
543
544 /* Enable MMIO */
545 outb(PCIReg, 0x3D4);
546 outb(inb(0x3D5) | 0x01, 0x3D5);
547}
548
549
550#define crtc_unlock() write3X4(CRTVSyncEnd, read3X4(CRTVSyncEnd) & 0x7F)
551
552/* Return flat panel's maximum x resolution */
Randy Dunlap474ab452006-06-25 05:48:38 -0700553static int __devinit get_nativex(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700554{
555 int x,y,tmp;
556
557 if (nativex)
558 return nativex;
559
560 tmp = (read3CE(VertStretch) >> 4) & 3;
561
562 switch (tmp) {
563 case 0: x = 1280; y = 1024; break;
564 case 2: x = 1024; y = 768; break;
565 case 3: x = 800; y = 600; break;
566 case 4: x = 1400; y = 1050; break;
567 case 1:
568 default:x = 640; y = 480; break;
569 }
570
571 output("%dx%d flat panel found\n", x, y);
572 return x;
573}
574
575/* Set pitch */
576static void set_lwidth(int width)
577{
578 write3X4(Offset, width & 0xFF);
579 write3X4(AddColReg, (read3X4(AddColReg) & 0xCF) | ((width & 0x300) >>4));
580}
581
582/* For resolutions smaller than FP resolution stretch */
583static void screen_stretch(void)
584{
585 if (chip_id != CYBERBLADEXPAi1)
586 write3CE(BiosReg,0);
587 else
588 write3CE(BiosReg,8);
589 write3CE(VertStretch,(read3CE(VertStretch) & 0x7C) | 1);
590 write3CE(HorStretch,(read3CE(HorStretch) & 0x7C) | 1);
591}
592
593/* For resolutions smaller than FP resolution center */
594static void screen_center(void)
595{
596 write3CE(VertStretch,(read3CE(VertStretch) & 0x7C) | 0x80);
597 write3CE(HorStretch,(read3CE(HorStretch) & 0x7C) | 0x80);
598}
599
600/* Address of first shown pixel in display memory */
601static void set_screen_start(int base)
602{
603 write3X4(StartAddrLow, base & 0xFF);
604 write3X4(StartAddrHigh, (base & 0xFF00) >> 8);
605 write3X4(CRTCModuleTest, (read3X4(CRTCModuleTest) & 0xDF) | ((base & 0x10000) >> 11));
606 write3X4(CRTHiOrd, (read3X4(CRTHiOrd) & 0xF8) | ((base & 0xE0000) >> 17));
607}
608
609/* Use 20.12 fixed-point for NTSC value and frequency calculation */
610#define calc_freq(n,m,k) ( ((unsigned long)0xE517 * (n+8) / ((m+2)*(1<<k))) >> 12 )
611
612/* Set dotclock frequency */
613static void set_vclk(int freq)
614{
615 int m,n,k;
616 int f,fi,d,di;
617 unsigned char lo=0,hi=0;
618
619 d = 20;
620 for(k = 2;k>=0;k--)
621 for(m = 0;m<63;m++)
622 for(n = 0;n<128;n++) {
623 fi = calc_freq(n,m,k);
624 if ((di = abs(fi - freq)) < d) {
625 d = di;
626 f = fi;
627 lo = n;
628 hi = (k<<6) | m;
629 }
630 }
631 if (chip3D) {
632 write3C4(ClockHigh,hi);
633 write3C4(ClockLow,lo);
634 } else {
635 outb(lo,0x43C8);
636 outb(hi,0x43C9);
637 }
638 debug("VCLK = %X %X\n",hi,lo);
639}
640
641/* Set number of lines for flat panels*/
642static void set_number_of_lines(int lines)
643{
644 int tmp = read3CE(CyberEnhance) & 0x8F;
645 if (lines > 1024)
646 tmp |= 0x50;
647 else if (lines > 768)
648 tmp |= 0x30;
649 else if (lines > 600)
650 tmp |= 0x20;
651 else if (lines > 480)
652 tmp |= 0x10;
653 write3CE(CyberEnhance, tmp);
654}
655
656/*
657 * If we see that FP is active we assume we have one.
658 * Otherwise we have a CRT display.User can override.
659 */
Randy Dunlap474ab452006-06-25 05:48:38 -0700660static unsigned int __devinit get_displaytype(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700661{
662 if (fp)
663 return DISPLAY_FP;
664 if (crt || !chipcyber)
665 return DISPLAY_CRT;
666 return (read3CE(FPConfig) & 0x10)?DISPLAY_FP:DISPLAY_CRT;
667}
668
669/* Try detecting the video memory size */
Randy Dunlap474ab452006-06-25 05:48:38 -0700670static unsigned int __devinit get_memsize(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700671{
672 unsigned char tmp, tmp2;
673 unsigned int k;
674
675 /* If memory size provided by user */
676 if (memsize)
677 k = memsize * Kb;
678 else
679 switch (chip_id) {
680 case CYBER9525DVD: k = 2560 * Kb; break;
681 default:
682 tmp = read3X4(SPR) & 0x0F;
683 switch (tmp) {
684
685 case 0x01: k = 512; break;
686 case 0x02: k = 6 * Mb; break; /* XP */
687 case 0x03: k = 1 * Mb; break;
688 case 0x04: k = 8 * Mb; break;
689 case 0x06: k = 10 * Mb; break; /* XP */
690 case 0x07: k = 2 * Mb; break;
691 case 0x08: k = 12 * Mb; break; /* XP */
692 case 0x0A: k = 14 * Mb; break; /* XP */
693 case 0x0C: k = 16 * Mb; break; /* XP */
694 case 0x0E: /* XP */
695
696 tmp2 = read3C4(0xC1);
697 switch (tmp2) {
698 case 0x00: k = 20 * Mb; break;
699 case 0x01: k = 24 * Mb; break;
700 case 0x10: k = 28 * Mb; break;
701 case 0x11: k = 32 * Mb; break;
702 default: k = 1 * Mb; break;
703 }
704 break;
705
706 case 0x0F: k = 4 * Mb; break;
707 default: k = 1 * Mb;
708 }
709 }
710
711 k -= memdiff * Kb;
712 output("framebuffer size = %d Kb\n", k/Kb);
713 return k;
714}
715
716/* See if we can handle the video mode described in var */
717static int tridentfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
718{
719 int bpp = var->bits_per_pixel;
720 debug("enter\n");
721
722 /* check color depth */
723 if (bpp == 24 )
724 bpp = var->bits_per_pixel = 32;
725 /* check whether resolution fits on panel and in memory*/
726 if (flatpanel && nativex && var->xres > nativex)
727 return -EINVAL;
728 if (var->xres * var->yres_virtual * bpp/8 > info->fix.smem_len)
729 return -EINVAL;
730
731 switch (bpp) {
732 case 8:
733 var->red.offset = 0;
734 var->green.offset = 0;
735 var->blue.offset = 0;
736 var->red.length = 6;
737 var->green.length = 6;
738 var->blue.length = 6;
739 break;
740 case 16:
741 var->red.offset = 11;
742 var->green.offset = 5;
743 var->blue.offset = 0;
744 var->red.length = 5;
745 var->green.length = 6;
746 var->blue.length = 5;
747 break;
748 case 32:
749 var->red.offset = 16;
750 var->green.offset = 8;
751 var->blue.offset = 0;
752 var->red.length = 8;
753 var->green.length = 8;
754 var->blue.length = 8;
755 break;
756 default:
757 return -EINVAL;
758 }
759 debug("exit\n");
760
761 return 0;
762
763}
764/* Pan the display */
765static int tridentfb_pan_display(struct fb_var_screeninfo *var,
766 struct fb_info *info)
767{
768 unsigned int offset;
769
770 debug("enter\n");
771 offset = (var->xoffset + (var->yoffset * var->xres))
772 * var->bits_per_pixel/32;
773 info->var.xoffset = var->xoffset;
774 info->var.yoffset = var->yoffset;
775 set_screen_start(offset);
776 debug("exit\n");
777 return 0;
778}
779
780#define shadowmode_on() write3CE(CyberControl,read3CE(CyberControl) | 0x81)
781#define shadowmode_off() write3CE(CyberControl,read3CE(CyberControl) & 0x7E)
782
783/* Set the hardware to the requested video mode */
784static int tridentfb_set_par(struct fb_info *info)
785{
786 struct tridentfb_par * par = (struct tridentfb_par *)(info->par);
787 u32 htotal,hdispend,hsyncstart,hsyncend,hblankstart,hblankend,
788 vtotal,vdispend,vsyncstart,vsyncend,vblankstart,vblankend;
789 struct fb_var_screeninfo *var = &info->var;
790 int bpp = var->bits_per_pixel;
791 unsigned char tmp;
792 debug("enter\n");
793 htotal = (var->xres + var->left_margin + var->right_margin + var->hsync_len)/8 - 10;
794 hdispend = var->xres/8 - 1;
795 hsyncstart = (var->xres + var->right_margin)/8;
796 hsyncend = var->hsync_len/8;
797 hblankstart = hdispend + 1;
798 hblankend = htotal + 5;
799
800 vtotal = var->yres + var->upper_margin + var->lower_margin + var->vsync_len - 2;
801 vdispend = var->yres - 1;
802 vsyncstart = var->yres + var->lower_margin;
803 vsyncend = var->vsync_len;
804 vblankstart = var->yres;
805 vblankend = vtotal + 2;
806
807 enable_mmio();
808 crtc_unlock();
809 write3CE(CyberControl,8);
810
811 if (flatpanel && var->xres < nativex) {
812 /*
813 * on flat panels with native size larger
814 * than requested resolution decide whether
815 * we stretch or center
816 */
817 t_outb(0xEB,0x3C2);
818
819 shadowmode_on();
820
821 if (center)
822 screen_center();
823 else if (stretch)
824 screen_stretch();
825
826 } else {
827 t_outb(0x2B,0x3C2);
828 write3CE(CyberControl,8);
829 }
830
831 /* vertical timing values */
832 write3X4(CRTVTotal, vtotal & 0xFF);
833 write3X4(CRTVDispEnd, vdispend & 0xFF);
834 write3X4(CRTVSyncStart, vsyncstart & 0xFF);
835 write3X4(CRTVSyncEnd, (vsyncend & 0x0F));
836 write3X4(CRTVBlankStart, vblankstart & 0xFF);
837 write3X4(CRTVBlankEnd, 0/*p->vblankend & 0xFF*/);
838
839 /* horizontal timing values */
840 write3X4(CRTHTotal, htotal & 0xFF);
841 write3X4(CRTHDispEnd, hdispend & 0xFF);
842 write3X4(CRTHSyncStart, hsyncstart & 0xFF);
843 write3X4(CRTHSyncEnd, (hsyncend & 0x1F) | ((hblankend & 0x20)<<2));
844 write3X4(CRTHBlankStart, hblankstart & 0xFF);
845 write3X4(CRTHBlankEnd, 0/*(p->hblankend & 0x1F)*/);
846
847 /* higher bits of vertical timing values */
848 tmp = 0x10;
849 if (vtotal & 0x100) tmp |= 0x01;
850 if (vdispend & 0x100) tmp |= 0x02;
851 if (vsyncstart & 0x100) tmp |= 0x04;
852 if (vblankstart & 0x100) tmp |= 0x08;
853
854 if (vtotal & 0x200) tmp |= 0x20;
855 if (vdispend & 0x200) tmp |= 0x40;
856 if (vsyncstart & 0x200) tmp |= 0x80;
857 write3X4(CRTOverflow, tmp);
858
859 tmp = read3X4(CRTHiOrd) | 0x08; //line compare bit 10
860 if (vtotal & 0x400) tmp |= 0x80;
861 if (vblankstart & 0x400) tmp |= 0x40;
862 if (vsyncstart & 0x400) tmp |= 0x20;
863 if (vdispend & 0x400) tmp |= 0x10;
864 write3X4(CRTHiOrd, tmp);
865
866 tmp = 0;
867 if (htotal & 0x800) tmp |= 0x800 >> 11;
868 if (hblankstart & 0x800) tmp |= 0x800 >> 7;
869 write3X4(HorizOverflow, tmp);
870
871 tmp = 0x40;
872 if (vblankstart & 0x200) tmp |= 0x20;
873//FIXME if (info->var.vmode & FB_VMODE_DOUBLE) tmp |= 0x80; //double scan for 200 line modes
874 write3X4(CRTMaxScanLine, tmp);
875
876 write3X4(CRTLineCompare,0xFF);
877 write3X4(CRTPRowScan,0);
878 write3X4(CRTModeControl,0xC3);
879
880 write3X4(LinearAddReg,0x20); //enable linear addressing
881
882 tmp = (info->var.vmode & FB_VMODE_INTERLACED) ? 0x84:0x80;
883 write3X4(CRTCModuleTest,tmp); //enable access extended memory
884
885 write3X4(GraphEngReg, 0x80); //enable GE for text acceleration
886
Antonino A. Daplas8dad46c2005-08-01 23:46:44 +0800887#ifdef CONFIG_FB_TRIDENT_ACCEL
888 acc->init_accel(info->var.xres,bpp);
889#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700890
891 switch (bpp) {
892 case 8: tmp = 0x00; break;
893 case 16: tmp = 0x05; break;
894 case 24: tmp = 0x29; break;
895 case 32: tmp = 0x09;
896 }
897
898 write3X4(PixelBusReg, tmp);
899
900 tmp = 0x10;
901 if (chipcyber)
902 tmp |= 0x20;
903 write3X4(DRAMControl, tmp); //both IO,linear enable
904
905 write3X4(InterfaceSel, read3X4(InterfaceSel) | 0x40);
Antonino A. Daplas8d894c42005-08-01 23:51:34 +0800906 write3X4(Performance,0x92);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700907 write3X4(PCIReg,0x07); //MMIO & PCI read and write burst enable
908
909 /* convert from picoseconds to MHz */
910 par->vclk = 1000000/info->var.pixclock;
911 if (bpp == 32)
912 par->vclk *=2;
913 set_vclk(par->vclk);
914
915 write3C4(0,3);
916 write3C4(1,1); //set char clock 8 dots wide
917 write3C4(2,0x0F); //enable 4 maps because needed in chain4 mode
918 write3C4(3,0);
919 write3C4(4,0x0E); //memory mode enable bitmaps ??
920
921 write3CE(MiscExtFunc,(bpp==32)?0x1A:0x12); //divide clock by 2 if 32bpp
922 //chain4 mode display and CPU path
923 write3CE(0x5,0x40); //no CGA compat,allow 256 col
924 write3CE(0x6,0x05); //graphics mode
925 write3CE(0x7,0x0F); //planes?
926
927 if (chip_id == CYBERBLADEXPAi1) {
928 /* This fixes snow-effect in 32 bpp */
929 write3X4(CRTHSyncStart,0x84);
930 }
931
932 writeAttr(0x10,0x41); //graphics mode and support 256 color modes
933 writeAttr(0x12,0x0F); //planes
934 writeAttr(0x13,0); //horizontal pel panning
935
936 //colors
937 for(tmp = 0;tmp < 0x10;tmp++)
938 writeAttr(tmp,tmp);
939 readb(par->io_virt + CRT + 0x0A); //flip-flop to index
940 t_outb(0x20, 0x3C0); //enable attr
941
942 switch (bpp) {
943 case 8: tmp = 0;break; //256 colors
944 case 15: tmp = 0x10;break;
945 case 16: tmp = 0x30;break; //hicolor
946 case 24: //truecolor
947 case 32: tmp = 0xD0;break;
948 }
949
950 t_inb(0x3C8);
951 t_inb(0x3C6);
952 t_inb(0x3C6);
953 t_inb(0x3C6);
954 t_inb(0x3C6);
955 t_outb(tmp,0x3C6);
956 t_inb(0x3C8);
957
958 if (flatpanel)
959 set_number_of_lines(info->var.yres);
960 set_lwidth(info->var.xres * bpp/(4*16));
961 info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
962 info->fix.line_length = info->var.xres * (bpp >> 3);
963 info->cmap.len = (bpp == 8) ? 256: 16;
964 debug("exit\n");
965 return 0;
966}
967
968/* Set one color register */
969static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
970 unsigned blue, unsigned transp,
971 struct fb_info *info)
972{
973 int bpp = info->var.bits_per_pixel;
974
975 if (regno >= info->cmap.len)
976 return 1;
977
978
979 if (bpp==8) {
980 t_outb(0xFF,0x3C6);
981 t_outb(regno,0x3C8);
982
983 t_outb(red>>10,0x3C9);
984 t_outb(green>>10,0x3C9);
985 t_outb(blue>>10,0x3C9);
986
Antonino A. Daplas8dad46c2005-08-01 23:46:44 +0800987 } else if (bpp == 16) { /* RGB 565 */
988 u32 col;
989
990 col = (red & 0xF800) | ((green & 0xFC00) >> 5) |
991 ((blue & 0xF800) >> 11);
992 col |= col << 16;
993 ((u32 *)(info->pseudo_palette))[regno] = col;
994 } else if (bpp == 32) /* ARGB 8888 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700995 ((u32*)info->pseudo_palette)[regno] =
996 ((transp & 0xFF00) <<16) |
997 ((red & 0xFF00) << 8) |
998 ((green & 0xFF00)) |
999 ((blue & 0xFF00)>>8);
1000
1001// debug("exit\n");
1002 return 0;
1003}
1004
1005/* Try blanking the screen.For flat panels it does nothing */
1006static int tridentfb_blank(int blank_mode, struct fb_info *info)
1007{
1008 unsigned char PMCont,DPMSCont;
1009
1010 debug("enter\n");
1011 if (flatpanel)
1012 return 0;
1013 t_outb(0x04,0x83C8); /* Read DPMS Control */
1014 PMCont = t_inb(0x83C6) & 0xFC;
1015 DPMSCont = read3CE(PowerStatus) & 0xFC;
1016 switch (blank_mode)
1017 {
1018 case FB_BLANK_UNBLANK:
1019 /* Screen: On, HSync: On, VSync: On */
1020 case FB_BLANK_NORMAL:
1021 /* Screen: Off, HSync: On, VSync: On */
1022 PMCont |= 0x03;
1023 DPMSCont |= 0x00;
1024 break;
1025 case FB_BLANK_HSYNC_SUSPEND:
1026 /* Screen: Off, HSync: Off, VSync: On */
1027 PMCont |= 0x02;
1028 DPMSCont |= 0x01;
1029 break;
1030 case FB_BLANK_VSYNC_SUSPEND:
1031 /* Screen: Off, HSync: On, VSync: Off */
1032 PMCont |= 0x02;
1033 DPMSCont |= 0x02;
1034 break;
1035 case FB_BLANK_POWERDOWN:
1036 /* Screen: Off, HSync: Off, VSync: Off */
1037 PMCont |= 0x00;
1038 DPMSCont |= 0x03;
1039 break;
1040 }
1041
1042 write3CE(PowerStatus,DPMSCont);
1043 t_outb(4,0x83C8);
1044 t_outb(PMCont,0x83C6);
1045
1046 debug("exit\n");
1047
1048 /* let fbcon do a softblank for us */
1049 return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
1050}
1051
1052static int __devinit trident_pci_probe(struct pci_dev * dev, const struct pci_device_id * id)
1053{
1054 int err;
1055 unsigned char revision;
1056
1057 err = pci_enable_device(dev);
1058 if (err)
1059 return err;
1060
1061 chip_id = id->device;
1062
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001063 if(chip_id == CYBERBLADEi1)
1064 output("*** Please do use cyblafb, Cyberblade/i1 support "
1065 "will soon be removed from tridentfb!\n");
1066
1067
Linus Torvalds1da177e2005-04-16 15:20:36 -07001068 /* If PCI id is 0x9660 then further detect chip type */
1069
1070 if (chip_id == TGUI9660) {
1071 outb(RevisionID,0x3C4);
1072 revision = inb(0x3C5);
1073
1074 switch (revision) {
1075 case 0x22:
1076 case 0x23: chip_id = CYBER9397;break;
1077 case 0x2A: chip_id = CYBER9397DVD;break;
1078 case 0x30:
1079 case 0x33:
1080 case 0x34:
1081 case 0x35:
1082 case 0x38:
1083 case 0x3A:
1084 case 0xB3: chip_id = CYBER9385;break;
1085 case 0x40 ... 0x43: chip_id = CYBER9382;break;
1086 case 0x4A: chip_id = CYBER9388;break;
1087 default:break;
1088 }
1089 }
1090
1091 chip3D = is3Dchip(chip_id);
1092 chipcyber = iscyber(chip_id);
1093
1094 if (is_xp(chip_id)) {
1095 acc = &accel_xp;
1096 } else
1097 if (is_blade(chip_id)) {
1098 acc = &accel_blade;
1099 } else {
1100 acc = &accel_image;
1101 }
1102
1103 /* acceleration is on by default for 3D chips */
1104 defaultaccel = chip3D && !noaccel;
1105
1106 fb_info.par = &default_par;
1107
1108 /* setup MMIO region */
1109 tridentfb_fix.mmio_start = pci_resource_start(dev,1);
1110 tridentfb_fix.mmio_len = chip3D ? 0x20000:0x10000;
1111
1112 if (!request_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len, "tridentfb")) {
1113 debug("request_region failed!\n");
1114 return -1;
1115 }
1116
1117 default_par.io_virt = ioremap_nocache(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
1118
1119 if (!default_par.io_virt) {
1120 release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
1121 debug("ioremap failed\n");
1122 return -1;
1123 }
1124
1125 enable_mmio();
1126
1127 /* setup framebuffer memory */
1128 tridentfb_fix.smem_start = pci_resource_start(dev,0);
1129 tridentfb_fix.smem_len = get_memsize();
1130
1131 if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
1132 debug("request_mem_region failed!\n");
1133 return -1;
1134 }
1135
1136 fb_info.screen_base = ioremap_nocache(tridentfb_fix.smem_start,
1137 tridentfb_fix.smem_len);
1138
1139 if (!fb_info.screen_base) {
1140 release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
1141 debug("ioremap failed\n");
1142 return -1;
1143 }
1144
1145 output("%s board found\n", pci_name(dev));
1146#if 0
1147 output("Trident board found : mem = %X,io = %X, mem_v = %X, io_v = %X\n",
1148 tridentfb_fix.smem_start, tridentfb_fix.mmio_start, fb_info.screen_base, default_par.io_virt);
1149#endif
1150 displaytype = get_displaytype();
1151
1152 if(flatpanel)
1153 nativex = get_nativex();
1154
1155 fb_info.fix = tridentfb_fix;
1156 fb_info.fbops = &tridentfb_ops;
1157
1158
1159 fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
1160#ifdef CONFIG_FB_TRIDENT_ACCEL
1161 fb_info.flags |= FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
1162#endif
1163 fb_info.pseudo_palette = pseudo_pal;
1164
1165 if (!fb_find_mode(&default_var,&fb_info,mode,NULL,0,NULL,bpp))
1166 return -EINVAL;
1167 fb_alloc_cmap(&fb_info.cmap,256,0);
1168 if (defaultaccel && acc)
1169 default_var.accel_flags |= FB_ACCELF_TEXT;
1170 else
1171 default_var.accel_flags &= ~FB_ACCELF_TEXT;
1172 default_var.activate |= FB_ACTIVATE_NOW;
1173 fb_info.var = default_var;
1174 fb_info.device = &dev->dev;
1175 if (register_framebuffer(&fb_info) < 0) {
1176 printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n");
1177 return -EINVAL;
1178 }
1179 output("fb%d: %s frame buffer device %dx%d-%dbpp\n",
1180 fb_info.node, fb_info.fix.id,default_var.xres,
1181 default_var.yres,default_var.bits_per_pixel);
1182 return 0;
1183}
1184
1185static void __devexit trident_pci_remove(struct pci_dev * dev)
1186{
1187 struct tridentfb_par *par = (struct tridentfb_par*)fb_info.par;
1188 unregister_framebuffer(&fb_info);
1189 iounmap(par->io_virt);
1190 iounmap(fb_info.screen_base);
1191 release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
1192 release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
1193}
1194
1195/* List of boards that we are trying to support */
1196static struct pci_device_id trident_devices[] = {
1197 {PCI_VENDOR_ID_TRIDENT, BLADE3D, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1198 {PCI_VENDOR_ID_TRIDENT, CYBERBLADEi7, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1199 {PCI_VENDOR_ID_TRIDENT, CYBERBLADEi7D, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1200 {PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1201 {PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1D, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1202 {PCI_VENDOR_ID_TRIDENT, CYBERBLADEAi1, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1203 {PCI_VENDOR_ID_TRIDENT, CYBERBLADEAi1D, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1204 {PCI_VENDOR_ID_TRIDENT, CYBERBLADEE4, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1205 {PCI_VENDOR_ID_TRIDENT, TGUI9660, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1206 {PCI_VENDOR_ID_TRIDENT, IMAGE975, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1207 {PCI_VENDOR_ID_TRIDENT, IMAGE985, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1208 {PCI_VENDOR_ID_TRIDENT, CYBER9320, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1209 {PCI_VENDOR_ID_TRIDENT, CYBER9388, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1210 {PCI_VENDOR_ID_TRIDENT, CYBER9520, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1211 {PCI_VENDOR_ID_TRIDENT, CYBER9525DVD, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1212 {PCI_VENDOR_ID_TRIDENT, CYBER9397, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1213 {PCI_VENDOR_ID_TRIDENT, CYBER9397DVD, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1214 {PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPAi1, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1215 {PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPm8, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1216 {PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPm16, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1217 {0,}
1218};
1219
1220MODULE_DEVICE_TABLE(pci,trident_devices);
1221
1222static struct pci_driver tridentfb_pci_driver = {
1223 .name = "tridentfb",
1224 .id_table = trident_devices,
1225 .probe = trident_pci_probe,
1226 .remove = __devexit_p(trident_pci_remove)
1227};
1228
1229/*
1230 * Parse user specified options (`video=trident:')
1231 * example:
1232 * video=trident:800x600,bpp=16,noaccel
1233 */
1234#ifndef MODULE
1235static int tridentfb_setup(char *options)
1236{
1237 char * opt;
1238 if (!options || !*options)
1239 return 0;
1240 while((opt = strsep(&options,",")) != NULL ) {
1241 if (!*opt) continue;
1242 if (!strncmp(opt,"noaccel",7))
1243 noaccel = 1;
1244 else if (!strncmp(opt,"fp",2))
1245 displaytype = DISPLAY_FP;
1246 else if (!strncmp(opt,"crt",3))
1247 displaytype = DISPLAY_CRT;
1248 else if (!strncmp(opt,"bpp=",4))
1249 bpp = simple_strtoul(opt+4,NULL,0);
1250 else if (!strncmp(opt,"center",6))
1251 center = 1;
1252 else if (!strncmp(opt,"stretch",7))
1253 stretch = 1;
1254 else if (!strncmp(opt,"memsize=",8))
1255 memsize = simple_strtoul(opt+8,NULL,0);
1256 else if (!strncmp(opt,"memdiff=",8))
1257 memdiff = simple_strtoul(opt+8,NULL,0);
1258 else if (!strncmp(opt,"nativex=",8))
1259 nativex = simple_strtoul(opt+8,NULL,0);
1260 else
1261 mode = opt;
1262 }
1263 return 0;
1264}
1265#endif
1266
1267static int __init tridentfb_init(void)
1268{
1269#ifndef MODULE
1270 char *option = NULL;
1271
1272 if (fb_get_options("tridentfb", &option))
1273 return -ENODEV;
1274 tridentfb_setup(option);
1275#endif
1276 output("Trident framebuffer %s initializing\n", VERSION);
1277 return pci_register_driver(&tridentfb_pci_driver);
1278}
1279
1280static void __exit tridentfb_exit(void)
1281{
1282 pci_unregister_driver(&tridentfb_pci_driver);
1283}
1284
1285static struct fb_ops tridentfb_ops = {
1286 .owner = THIS_MODULE,
1287 .fb_setcolreg = tridentfb_setcolreg,
1288 .fb_pan_display = tridentfb_pan_display,
1289 .fb_blank = tridentfb_blank,
1290 .fb_check_var = tridentfb_check_var,
1291 .fb_set_par = tridentfb_set_par,
1292 .fb_fillrect = tridentfb_fillrect,
1293 .fb_copyarea= tridentfb_copyarea,
1294 .fb_imageblit = cfb_imageblit,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001295};
1296
1297module_init(tridentfb_init);
1298module_exit(tridentfb_exit);
1299
1300MODULE_AUTHOR("Jani Monoses <jani@iv.ro>");
1301MODULE_DESCRIPTION("Framebuffer driver for Trident cards");
1302MODULE_LICENSE("GPL");
1303