| Nicolas Ferre | 467f1cf | 2012-01-26 11:59:20 +0100 | [diff] [blame] | 1 | /* |
| 2 | * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC |
| 3 | * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, |
| 4 | * AT91SAM9X25, AT91SAM9X35 SoC |
| 5 | * |
| 6 | * Copyright (C) 2012 Atmel, |
| 7 | * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> |
| 8 | * |
| 9 | * Licensed under GPLv2 or later. |
| 10 | */ |
| 11 | |
| 12 | /include/ "skeleton.dtsi" |
| 13 | |
| 14 | / { |
| 15 | model = "Atmel AT91SAM9x5 family SoC"; |
| 16 | compatible = "atmel,at91sam9x5"; |
| 17 | interrupt-parent = <&aic>; |
| 18 | |
| 19 | aliases { |
| 20 | serial0 = &dbgu; |
| 21 | serial1 = &usart0; |
| 22 | serial2 = &usart1; |
| 23 | serial3 = &usart2; |
| 24 | gpio0 = &pioA; |
| 25 | gpio1 = &pioB; |
| 26 | gpio2 = &pioC; |
| 27 | gpio3 = &pioD; |
| 28 | tcb0 = &tcb0; |
| 29 | tcb1 = &tcb1; |
| 30 | }; |
| 31 | cpus { |
| 32 | cpu@0 { |
| 33 | compatible = "arm,arm926ejs"; |
| 34 | }; |
| 35 | }; |
| 36 | |
| 37 | memory@20000000 { |
| 38 | reg = <0x20000000 0x10000000>; |
| 39 | }; |
| 40 | |
| 41 | ahb { |
| 42 | compatible = "simple-bus"; |
| 43 | #address-cells = <1>; |
| 44 | #size-cells = <1>; |
| 45 | ranges; |
| 46 | |
| 47 | apb { |
| 48 | compatible = "simple-bus"; |
| 49 | #address-cells = <1>; |
| 50 | #size-cells = <1>; |
| 51 | ranges; |
| 52 | |
| 53 | aic: interrupt-controller@fffff000 { |
| 54 | #interrupt-cells = <2>; |
| 55 | compatible = "atmel,at91rm9200-aic"; |
| 56 | interrupt-controller; |
| 57 | interrupt-parent; |
| 58 | reg = <0xfffff000 0x200>; |
| 59 | }; |
| 60 | |
| 61 | pit: timer@fffffe30 { |
| 62 | compatible = "atmel,at91sam9260-pit"; |
| 63 | reg = <0xfffffe30 0xf>; |
| 64 | interrupts = <1 4>; |
| 65 | }; |
| 66 | |
| 67 | tcb0: timer@f8008000 { |
| 68 | compatible = "atmel,at91sam9x5-tcb"; |
| 69 | reg = <0xf8008000 0x100>; |
| 70 | interrupts = <17 4>; |
| 71 | }; |
| 72 | |
| 73 | tcb1: timer@f800c000 { |
| 74 | compatible = "atmel,at91sam9x5-tcb"; |
| 75 | reg = <0xf800c000 0x100>; |
| 76 | interrupts = <17 4>; |
| 77 | }; |
| 78 | |
| 79 | dma0: dma-controller@ffffec00 { |
| 80 | compatible = "atmel,at91sam9g45-dma"; |
| 81 | reg = <0xffffec00 0x200>; |
| 82 | interrupts = <20 4>; |
| 83 | }; |
| 84 | |
| 85 | dma1: dma-controller@ffffee00 { |
| 86 | compatible = "atmel,at91sam9g45-dma"; |
| 87 | reg = <0xffffee00 0x200>; |
| 88 | interrupts = <21 4>; |
| 89 | }; |
| 90 | |
| 91 | pioA: gpio@fffff400 { |
| 92 | compatible = "atmel,at91rm9200-gpio"; |
| 93 | reg = <0xfffff400 0x100>; |
| 94 | interrupts = <2 4>; |
| 95 | #gpio-cells = <2>; |
| 96 | gpio-controller; |
| 97 | }; |
| 98 | |
| 99 | pioB: gpio@fffff600 { |
| 100 | compatible = "atmel,at91rm9200-gpio"; |
| 101 | reg = <0xfffff600 0x100>; |
| 102 | interrupts = <2 4>; |
| 103 | #gpio-cells = <2>; |
| 104 | gpio-controller; |
| 105 | }; |
| 106 | |
| 107 | pioC: gpio@fffff800 { |
| 108 | compatible = "atmel,at91rm9200-gpio"; |
| 109 | reg = <0xfffff800 0x100>; |
| 110 | interrupts = <3 4>; |
| 111 | #gpio-cells = <2>; |
| 112 | gpio-controller; |
| 113 | }; |
| 114 | |
| 115 | pioD: gpio@fffffa00 { |
| 116 | compatible = "atmel,at91rm9200-gpio"; |
| 117 | reg = <0xfffffa00 0x100>; |
| 118 | interrupts = <3 4>; |
| 119 | #gpio-cells = <2>; |
| 120 | gpio-controller; |
| 121 | }; |
| 122 | |
| 123 | dbgu: serial@fffff200 { |
| 124 | compatible = "atmel,at91sam9260-usart"; |
| 125 | reg = <0xfffff200 0x200>; |
| 126 | interrupts = <1 4>; |
| 127 | status = "disabled"; |
| 128 | }; |
| 129 | |
| 130 | usart0: serial@f801c000 { |
| 131 | compatible = "atmel,at91sam9260-usart"; |
| 132 | reg = <0xf801c000 0x200>; |
| 133 | interrupts = <5 4>; |
| 134 | atmel,use-dma-rx; |
| 135 | atmel,use-dma-tx; |
| 136 | status = "disabled"; |
| 137 | }; |
| 138 | |
| 139 | usart1: serial@f8020000 { |
| 140 | compatible = "atmel,at91sam9260-usart"; |
| 141 | reg = <0xf8020000 0x200>; |
| 142 | interrupts = <6 4>; |
| 143 | atmel,use-dma-rx; |
| 144 | atmel,use-dma-tx; |
| 145 | status = "disabled"; |
| 146 | }; |
| 147 | |
| 148 | usart2: serial@f8024000 { |
| 149 | compatible = "atmel,at91sam9260-usart"; |
| 150 | reg = <0xf8024000 0x200>; |
| 151 | interrupts = <7 4>; |
| 152 | atmel,use-dma-rx; |
| 153 | atmel,use-dma-tx; |
| 154 | status = "disabled"; |
| 155 | }; |
| 156 | |
| 157 | macb0: ethernet@f802c000 { |
| 158 | compatible = "cdns,at32ap7000-macb", "cdns,macb"; |
| 159 | reg = <0xf802c000 0x100>; |
| 160 | interrupts = <24 4>; |
| 161 | status = "disabled"; |
| 162 | }; |
| 163 | |
| 164 | macb1: ethernet@f8030000 { |
| 165 | compatible = "cdns,at32ap7000-macb", "cdns,macb"; |
| 166 | reg = <0xf8030000 0x100>; |
| 167 | interrupts = <27 4>; |
| 168 | status = "disabled"; |
| 169 | }; |
| 170 | }; |
| 171 | }; |
| 172 | }; |