blob: 8cdbfeca5903e84b6cf82b0ad54a036a83efd920 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Input core configuration
3#
4config SERIO
5 tristate "Serial I/O support" if EMBEDDED || !X86
6 default y
7 ---help---
8 Say Yes here if you have any input device that uses serial I/O to
9 communicate with the system. This includes the
10 * standard AT keyboard and PS/2 mouse *
11 as well as serial mice, Sun keyboards, some joysticks and 6dof
12 devices and more.
13
14 If unsure, say Y.
15
16 To compile this driver as a module, choose M here: the
17 module will be called serio.
18
19if SERIO
20
21config SERIO_I8042
22 tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
23 default y
24 depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K
25 ---help---
26 i8042 is the chip over which the standard AT keyboard and PS/2
27 mouse are connected to the computer. If you use these devices,
28 you'll need to say Y here.
29
30 If unsure, say Y.
31
32 To compile this driver as a module, choose M here: the
33 module will be called i8042.
34
35config SERIO_SERPORT
36 tristate "Serial port line discipline"
37 default y
38 ---help---
39 Say Y here if you plan to use an input device (mouse, joystick,
40 tablet, 6dof) that communicates over the RS232 serial (COM) port.
41
42 More information is available: <file:Documentation/input/input.txt>
43
44 If unsure, say Y.
45
46 To compile this driver as a module, choose M here: the
47 module will be called serport.
48
49config SERIO_CT82C710
50 tristate "ct82c710 Aux port controller"
51 depends on X86
52 ---help---
53 Say Y here if you have a Texas Instruments TravelMate notebook
54 equipped with the ct82c710 chip and want to use a mouse connected
55 to the "QuickPort".
56
57 If unsure, say N.
58
59 To compile this driver as a module, choose M here: the
60 module will be called ct82c710.
61
62config SERIO_Q40KBD
63 tristate "Q40 keyboard controller"
64 depends on Q40
65
66config SERIO_PARKBD
67 tristate "Parallel port keyboard adapter"
68 depends on PARPORT
69 ---help---
70 Say Y here if you built a simple parallel port adapter to attach
71 an additional AT keyboard, XT keyboard or PS/2 mouse.
72
73 More information is available: <file:Documentation/input/input.txt>
74
75 If unsure, say N.
76
77 To compile this driver as a module, choose M here: the
78 module will be called parkbd.
79
80config SERIO_RPCKBD
81 tristate "Acorn RiscPC keyboard controller"
82 depends on ARCH_ACORN || ARCH_CLPS7500
83 default y
84 help
85 Say Y here if you have the Acorn RiscPC and want to use an AT
86 keyboard connected to its keyboard controller.
87
88 To compile this driver as a module, choose M here: the
89 module will be called rpckbd.
90
91config SERIO_AMBAKMI
92 tristate "AMBA KMI keyboard controller"
93 depends on ARM_AMBA
94
95config SERIO_SA1111
96 tristate "Intel SA1111 keyboard controller"
97 depends on SA1111
98
99config SERIO_GSCPS2
100 tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
101 depends on GSC
102 default y
103 help
104 This driver provides support for the PS/2 ports on PA-RISC machines
105 over which HP PS/2 keyboards and PS/2 mice may be connected.
106 If you use these devices, you'll need to say Y here.
107
108 It's safe to enable this driver, so if unsure, say Y.
109
110 To compile this driver as a module, choose M here: the
111 module will be called gscps2.
112
113config HP_SDC
114 tristate "HP System Device Controller i8042 Support"
115 depends on GSC && SERIO
116 default y
117 ---help---
Matt LaPlante09509602006-10-03 22:31:37 +0200118 This option enables support for the "System Device
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119 Controller", an i8042 carrying microcode to manage a
Matt LaPlante09509602006-10-03 22:31:37 +0200120 few miscellaneous devices on some Hewlett Packard systems.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700121 The SDC itself contains a 10ms resolution timer/clock capable
122 of delivering interrupts on a periodic and one-shot basis.
123 The SDC may also be connected to a battery-backed real-time
124 clock, a basic audio waveform generator, and an HP-HIL Master
125 Link Controller serving up to seven input devices.
126
127 By itself this option is rather useless, but enabling it will
128 enable selection of drivers for the abovementioned devices.
129 It is, however, incompatible with the old, reliable HIL keyboard
130 driver, and the new HIL driver is experimental, so if you plan
131 to use a HIL keyboard as your primary keyboard, you may wish
132 to keep using that driver until the new HIL drivers have had
133 more testing.
134
135config HIL_MLC
136 tristate "HIL MLC Support (needed for HIL input devices)"
137 depends on HP_SDC
138
139config SERIO_PCIPS2
140 tristate "PCI PS/2 keyboard and PS/2 mouse controller"
141 depends on PCI
142 help
143 Say Y here if you have a Mobility Docking station with PS/2
144 keyboard and mice ports.
145
146 To compile this driver as a module, choose M here: the
147 module will be called pcips2.
148
149config SERIO_MACEPS2
150 tristate "SGI O2 MACE PS/2 controller"
151 depends on SGI_IP32
152 help
153 Say Y here if you have SGI O2 workstation and want to use its
154 PS/2 ports.
155
156 To compile this driver as a module, choose M here: the
157 module will be called maceps2.
158
159config SERIO_LIBPS2
160 tristate "PS/2 driver library" if EMBEDDED
161 help
162 Say Y here if you are using a driver for device connected
163 to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
164
165 To compile this driver as a module, choose M here: the
166 module will be called libps2.
167
168config SERIO_RAW
169 tristate "Raw access to serio ports"
170 help
171 Say Y here if you want to have raw access to serio ports, such as
172 AUX ports on i8042 keyboard controller. Each serio port that is
173 bound to this driver will be accessible via a char device with
174 major 10 and dynamically allocated minor. The driver will try
175 allocating minor 1 (that historically corresponds to /dev/psaux)
176 first. To bind this driver to a serio port use sysfs interface:
177
Neil Brownbef5a662005-07-11 01:05:47 -0500178 echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl
Linus Torvalds1da177e2005-04-16 15:20:36 -0700179
180 To compile this driver as a module, choose M here: the
181 module will be called serio_raw.
182
183endif