Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 1 | /* |
| 2 | * LED Flash class driver for the flash cell of max77693 mfd. |
| 3 | * |
| 4 | * Copyright (C) 2015, Samsung Electronics Co., Ltd. |
| 5 | * |
| 6 | * Authors: Jacek Anaszewski <j.anaszewski@samsung.com> |
| 7 | * Andrzej Hajda <a.hajda@samsung.com> |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License |
| 11 | * version 2 as published by the Free Software Foundation. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/led-class-flash.h> |
| 15 | #include <linux/mfd/max77693.h> |
Krzysztof Kozlowski | 61b305c | 2015-07-15 21:59:50 +0900 | [diff] [blame] | 16 | #include <linux/mfd/max77693-common.h> |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 17 | #include <linux/mfd/max77693-private.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/mutex.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | #include <linux/regmap.h> |
| 22 | #include <linux/slab.h> |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 23 | #include <media/v4l2-flash-led-class.h> |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 24 | |
| 25 | #define MODE_OFF 0 |
| 26 | #define MODE_FLASH(a) (1 << (a)) |
| 27 | #define MODE_TORCH(a) (1 << (2 + (a))) |
| 28 | #define MODE_FLASH_EXTERNAL(a) (1 << (4 + (a))) |
| 29 | |
| 30 | #define MODE_FLASH_MASK (MODE_FLASH(FLED1) | MODE_FLASH(FLED2) | \ |
| 31 | MODE_FLASH_EXTERNAL(FLED1) | \ |
| 32 | MODE_FLASH_EXTERNAL(FLED2)) |
| 33 | #define MODE_TORCH_MASK (MODE_TORCH(FLED1) | MODE_TORCH(FLED2)) |
| 34 | |
| 35 | #define FLED1_IOUT (1 << 0) |
| 36 | #define FLED2_IOUT (1 << 1) |
| 37 | |
| 38 | enum max77693_fled { |
| 39 | FLED1, |
| 40 | FLED2, |
| 41 | }; |
| 42 | |
| 43 | enum max77693_led_mode { |
| 44 | FLASH, |
| 45 | TORCH, |
| 46 | }; |
| 47 | |
| 48 | struct max77693_led_config_data { |
| 49 | const char *label[2]; |
| 50 | u32 iout_torch_max[2]; |
| 51 | u32 iout_flash_max[2]; |
| 52 | u32 flash_timeout_max[2]; |
| 53 | u32 num_leds; |
| 54 | u32 boost_mode; |
| 55 | u32 boost_vout; |
| 56 | u32 low_vsys; |
| 57 | }; |
| 58 | |
| 59 | struct max77693_sub_led { |
| 60 | /* corresponding FLED output identifier */ |
| 61 | int fled_id; |
| 62 | /* corresponding LED Flash class device */ |
| 63 | struct led_classdev_flash fled_cdev; |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 64 | /* V4L2 Flash device */ |
| 65 | struct v4l2_flash *v4l2_flash; |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 66 | |
| 67 | /* brightness cache */ |
| 68 | unsigned int torch_brightness; |
| 69 | /* flash timeout cache */ |
| 70 | unsigned int flash_timeout; |
| 71 | /* flash faults that may have occurred */ |
| 72 | u32 flash_faults; |
| 73 | }; |
| 74 | |
| 75 | struct max77693_led_device { |
| 76 | /* parent mfd regmap */ |
| 77 | struct regmap *regmap; |
| 78 | /* platform device data */ |
| 79 | struct platform_device *pdev; |
| 80 | /* secures access to the device */ |
| 81 | struct mutex lock; |
| 82 | |
| 83 | /* sub led data */ |
| 84 | struct max77693_sub_led sub_leds[2]; |
| 85 | |
| 86 | /* maximum torch current values for FLED outputs */ |
| 87 | u32 iout_torch_max[2]; |
| 88 | /* maximum flash current values for FLED outputs */ |
| 89 | u32 iout_flash_max[2]; |
| 90 | |
| 91 | /* current flash timeout cache */ |
| 92 | unsigned int current_flash_timeout; |
| 93 | /* ITORCH register cache */ |
| 94 | u8 torch_iout_reg; |
| 95 | /* mode of fled outputs */ |
| 96 | unsigned int mode_flags; |
| 97 | /* recently strobed fled */ |
| 98 | int strobing_sub_led_id; |
| 99 | /* bitmask of FLED outputs use state (bit 0. - FLED1, bit 1. - FLED2) */ |
| 100 | u8 fled_mask; |
| 101 | /* FLED modes that can be set */ |
| 102 | u8 allowed_modes; |
| 103 | |
| 104 | /* arrangement of current outputs */ |
| 105 | bool iout_joint; |
| 106 | }; |
| 107 | |
| 108 | static u8 max77693_led_iout_to_reg(u32 ua) |
| 109 | { |
| 110 | if (ua < FLASH_IOUT_MIN) |
| 111 | ua = FLASH_IOUT_MIN; |
| 112 | return (ua - FLASH_IOUT_MIN) / FLASH_IOUT_STEP; |
| 113 | } |
| 114 | |
| 115 | static u8 max77693_flash_timeout_to_reg(u32 us) |
| 116 | { |
| 117 | return (us - FLASH_TIMEOUT_MIN) / FLASH_TIMEOUT_STEP; |
| 118 | } |
| 119 | |
| 120 | static inline struct max77693_sub_led *flcdev_to_sub_led( |
| 121 | struct led_classdev_flash *fled_cdev) |
| 122 | { |
| 123 | return container_of(fled_cdev, struct max77693_sub_led, fled_cdev); |
| 124 | } |
| 125 | |
| 126 | static inline struct max77693_led_device *sub_led_to_led( |
| 127 | struct max77693_sub_led *sub_led) |
| 128 | { |
| 129 | return container_of(sub_led, struct max77693_led_device, |
| 130 | sub_leds[sub_led->fled_id]); |
| 131 | } |
| 132 | |
| 133 | static inline u8 max77693_led_vsys_to_reg(u32 mv) |
| 134 | { |
| 135 | return ((mv - MAX_FLASH1_VSYS_MIN) / MAX_FLASH1_VSYS_STEP) << 2; |
| 136 | } |
| 137 | |
| 138 | static inline u8 max77693_led_vout_to_reg(u32 mv) |
| 139 | { |
| 140 | return (mv - FLASH_VOUT_MIN) / FLASH_VOUT_STEP + FLASH_VOUT_RMIN; |
| 141 | } |
| 142 | |
| 143 | static inline bool max77693_fled_used(struct max77693_led_device *led, |
| 144 | int fled_id) |
| 145 | { |
| 146 | u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT; |
| 147 | |
| 148 | return led->fled_mask & fled_bit; |
| 149 | } |
| 150 | |
| 151 | static int max77693_set_mode_reg(struct max77693_led_device *led, u8 mode) |
| 152 | { |
| 153 | struct regmap *rmap = led->regmap; |
| 154 | int ret, v = 0, i; |
| 155 | |
| 156 | for (i = FLED1; i <= FLED2; ++i) { |
| 157 | if (mode & MODE_TORCH(i)) |
| 158 | v |= FLASH_EN_ON << TORCH_EN_SHIFT(i); |
| 159 | |
| 160 | if (mode & MODE_FLASH(i)) { |
| 161 | v |= FLASH_EN_ON << FLASH_EN_SHIFT(i); |
| 162 | } else if (mode & MODE_FLASH_EXTERNAL(i)) { |
| 163 | v |= FLASH_EN_FLASH << FLASH_EN_SHIFT(i); |
| 164 | /* |
| 165 | * Enable hw triggering also for torch mode, as some |
| 166 | * camera sensors use torch led to fathom ambient light |
| 167 | * conditions before strobing the flash. |
| 168 | */ |
| 169 | v |= FLASH_EN_TORCH << TORCH_EN_SHIFT(i); |
| 170 | } |
| 171 | } |
| 172 | |
| 173 | /* Reset the register only prior setting flash modes */ |
| 174 | if (mode & ~(MODE_TORCH(FLED1) | MODE_TORCH(FLED2))) { |
| 175 | ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, 0); |
| 176 | if (ret < 0) |
| 177 | return ret; |
| 178 | } |
| 179 | |
| 180 | return regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, v); |
| 181 | } |
| 182 | |
| 183 | static int max77693_add_mode(struct max77693_led_device *led, u8 mode) |
| 184 | { |
| 185 | u8 new_mode_flags; |
| 186 | int i, ret; |
| 187 | |
| 188 | if (led->iout_joint) |
| 189 | /* Span the mode on FLED2 for joint iouts case */ |
| 190 | mode |= (mode << 1); |
| 191 | |
| 192 | /* |
| 193 | * FLASH_EXTERNAL mode activates FLASHEN and TORCHEN pins in the device. |
| 194 | * Corresponding register bit fields interfere with SW triggered modes, |
| 195 | * thus clear them to ensure proper device configuration. |
| 196 | */ |
| 197 | for (i = FLED1; i <= FLED2; ++i) |
| 198 | if (mode & MODE_FLASH_EXTERNAL(i)) |
| 199 | led->mode_flags &= (~MODE_TORCH(i) & ~MODE_FLASH(i)); |
| 200 | |
| 201 | new_mode_flags = mode | led->mode_flags; |
| 202 | new_mode_flags &= led->allowed_modes; |
| 203 | |
| 204 | if (new_mode_flags ^ led->mode_flags) |
| 205 | led->mode_flags = new_mode_flags; |
| 206 | else |
| 207 | return 0; |
| 208 | |
| 209 | ret = max77693_set_mode_reg(led, led->mode_flags); |
| 210 | if (ret < 0) |
| 211 | return ret; |
| 212 | |
| 213 | /* |
| 214 | * Clear flash mode flag after setting the mode to avoid spurious flash |
| 215 | * strobing on each subsequent torch mode setting. |
| 216 | */ |
| 217 | if (mode & MODE_FLASH_MASK) |
| 218 | led->mode_flags &= ~mode; |
| 219 | |
| 220 | return ret; |
| 221 | } |
| 222 | |
| 223 | static int max77693_clear_mode(struct max77693_led_device *led, |
| 224 | u8 mode) |
| 225 | { |
| 226 | if (led->iout_joint) |
| 227 | /* Clear mode also on FLED2 for joint iouts case */ |
| 228 | mode |= (mode << 1); |
| 229 | |
| 230 | led->mode_flags &= ~mode; |
| 231 | |
| 232 | return max77693_set_mode_reg(led, led->mode_flags); |
| 233 | } |
| 234 | |
| 235 | static void max77693_add_allowed_modes(struct max77693_led_device *led, |
| 236 | int fled_id, enum max77693_led_mode mode) |
| 237 | { |
| 238 | if (mode == FLASH) |
| 239 | led->allowed_modes |= (MODE_FLASH(fled_id) | |
| 240 | MODE_FLASH_EXTERNAL(fled_id)); |
| 241 | else |
| 242 | led->allowed_modes |= MODE_TORCH(fled_id); |
| 243 | } |
| 244 | |
| 245 | static void max77693_distribute_currents(struct max77693_led_device *led, |
| 246 | int fled_id, enum max77693_led_mode mode, |
| 247 | u32 micro_amp, u32 iout_max[2], u32 iout[2]) |
| 248 | { |
| 249 | if (!led->iout_joint) { |
| 250 | iout[fled_id] = micro_amp; |
| 251 | max77693_add_allowed_modes(led, fled_id, mode); |
| 252 | return; |
| 253 | } |
| 254 | |
| 255 | iout[FLED1] = min(micro_amp, iout_max[FLED1]); |
| 256 | iout[FLED2] = micro_amp - iout[FLED1]; |
| 257 | |
| 258 | if (mode == FLASH) |
| 259 | led->allowed_modes &= ~MODE_FLASH_MASK; |
| 260 | else |
| 261 | led->allowed_modes &= ~MODE_TORCH_MASK; |
| 262 | |
| 263 | max77693_add_allowed_modes(led, FLED1, mode); |
| 264 | |
| 265 | if (iout[FLED2]) |
| 266 | max77693_add_allowed_modes(led, FLED2, mode); |
| 267 | } |
| 268 | |
| 269 | static int max77693_set_torch_current(struct max77693_led_device *led, |
| 270 | int fled_id, u32 micro_amp) |
| 271 | { |
| 272 | struct regmap *rmap = led->regmap; |
| 273 | u8 iout1_reg = 0, iout2_reg = 0; |
| 274 | u32 iout[2]; |
| 275 | |
| 276 | max77693_distribute_currents(led, fled_id, TORCH, micro_amp, |
| 277 | led->iout_torch_max, iout); |
| 278 | |
| 279 | if (fled_id == FLED1 || led->iout_joint) { |
| 280 | iout1_reg = max77693_led_iout_to_reg(iout[FLED1]); |
| 281 | led->torch_iout_reg &= TORCH_IOUT_MASK(TORCH_IOUT2_SHIFT); |
| 282 | } |
| 283 | if (fled_id == FLED2 || led->iout_joint) { |
| 284 | iout2_reg = max77693_led_iout_to_reg(iout[FLED2]); |
| 285 | led->torch_iout_reg &= TORCH_IOUT_MASK(TORCH_IOUT1_SHIFT); |
| 286 | } |
| 287 | |
| 288 | led->torch_iout_reg |= ((iout1_reg << TORCH_IOUT1_SHIFT) | |
| 289 | (iout2_reg << TORCH_IOUT2_SHIFT)); |
| 290 | |
| 291 | return regmap_write(rmap, MAX77693_LED_REG_ITORCH, |
| 292 | led->torch_iout_reg); |
| 293 | } |
| 294 | |
| 295 | static int max77693_set_flash_current(struct max77693_led_device *led, |
| 296 | int fled_id, |
| 297 | u32 micro_amp) |
| 298 | { |
| 299 | struct regmap *rmap = led->regmap; |
| 300 | u8 iout1_reg, iout2_reg; |
| 301 | u32 iout[2]; |
| 302 | int ret = -EINVAL; |
| 303 | |
| 304 | max77693_distribute_currents(led, fled_id, FLASH, micro_amp, |
| 305 | led->iout_flash_max, iout); |
| 306 | |
| 307 | if (fled_id == FLED1 || led->iout_joint) { |
| 308 | iout1_reg = max77693_led_iout_to_reg(iout[FLED1]); |
| 309 | ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH1, |
| 310 | iout1_reg); |
| 311 | if (ret < 0) |
| 312 | return ret; |
| 313 | } |
| 314 | if (fled_id == FLED2 || led->iout_joint) { |
| 315 | iout2_reg = max77693_led_iout_to_reg(iout[FLED2]); |
| 316 | ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH2, |
| 317 | iout2_reg); |
| 318 | } |
| 319 | |
| 320 | return ret; |
| 321 | } |
| 322 | |
| 323 | static int max77693_set_timeout(struct max77693_led_device *led, u32 microsec) |
| 324 | { |
| 325 | struct regmap *rmap = led->regmap; |
| 326 | u8 v; |
| 327 | int ret; |
| 328 | |
| 329 | v = max77693_flash_timeout_to_reg(microsec) | FLASH_TMR_LEVEL; |
| 330 | |
| 331 | ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_TIMER, v); |
| 332 | if (ret < 0) |
| 333 | return ret; |
| 334 | |
| 335 | led->current_flash_timeout = microsec; |
| 336 | |
| 337 | return 0; |
| 338 | } |
| 339 | |
| 340 | static int max77693_get_strobe_status(struct max77693_led_device *led, |
| 341 | bool *state) |
| 342 | { |
| 343 | struct regmap *rmap = led->regmap; |
| 344 | unsigned int v; |
| 345 | int ret; |
| 346 | |
| 347 | ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_STATUS, &v); |
| 348 | if (ret < 0) |
| 349 | return ret; |
| 350 | |
| 351 | *state = v & FLASH_STATUS_FLASH_ON; |
| 352 | |
| 353 | return ret; |
| 354 | } |
| 355 | |
| 356 | static int max77693_get_flash_faults(struct max77693_sub_led *sub_led) |
| 357 | { |
| 358 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 359 | struct regmap *rmap = led->regmap; |
| 360 | unsigned int v; |
| 361 | u8 fault_open_mask, fault_short_mask; |
| 362 | int ret; |
| 363 | |
| 364 | sub_led->flash_faults = 0; |
| 365 | |
| 366 | if (led->iout_joint) { |
| 367 | fault_open_mask = FLASH_INT_FLED1_OPEN | FLASH_INT_FLED2_OPEN; |
| 368 | fault_short_mask = FLASH_INT_FLED1_SHORT | |
| 369 | FLASH_INT_FLED2_SHORT; |
| 370 | } else { |
| 371 | fault_open_mask = (sub_led->fled_id == FLED1) ? |
| 372 | FLASH_INT_FLED1_OPEN : |
| 373 | FLASH_INT_FLED2_OPEN; |
| 374 | fault_short_mask = (sub_led->fled_id == FLED1) ? |
| 375 | FLASH_INT_FLED1_SHORT : |
| 376 | FLASH_INT_FLED2_SHORT; |
| 377 | } |
| 378 | |
| 379 | ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_INT, &v); |
| 380 | if (ret < 0) |
| 381 | return ret; |
| 382 | |
| 383 | if (v & fault_open_mask) |
| 384 | sub_led->flash_faults |= LED_FAULT_OVER_VOLTAGE; |
| 385 | if (v & fault_short_mask) |
| 386 | sub_led->flash_faults |= LED_FAULT_SHORT_CIRCUIT; |
| 387 | if (v & FLASH_INT_OVER_CURRENT) |
| 388 | sub_led->flash_faults |= LED_FAULT_OVER_CURRENT; |
| 389 | |
| 390 | return 0; |
| 391 | } |
| 392 | |
| 393 | static int max77693_setup(struct max77693_led_device *led, |
| 394 | struct max77693_led_config_data *led_cfg) |
| 395 | { |
| 396 | struct regmap *rmap = led->regmap; |
| 397 | int i, first_led, last_led, ret; |
| 398 | u32 max_flash_curr[2]; |
| 399 | u8 v; |
| 400 | |
| 401 | /* |
| 402 | * Initialize only flash current. Torch current doesn't |
| 403 | * require initialization as ITORCH register is written with |
| 404 | * new value each time brightness_set op is called. |
| 405 | */ |
| 406 | if (led->iout_joint) { |
| 407 | first_led = FLED1; |
| 408 | last_led = FLED1; |
| 409 | max_flash_curr[FLED1] = led_cfg->iout_flash_max[FLED1] + |
| 410 | led_cfg->iout_flash_max[FLED2]; |
| 411 | } else { |
| 412 | first_led = max77693_fled_used(led, FLED1) ? FLED1 : FLED2; |
| 413 | last_led = max77693_fled_used(led, FLED2) ? FLED2 : FLED1; |
| 414 | max_flash_curr[FLED1] = led_cfg->iout_flash_max[FLED1]; |
| 415 | max_flash_curr[FLED2] = led_cfg->iout_flash_max[FLED2]; |
| 416 | } |
| 417 | |
| 418 | for (i = first_led; i <= last_led; ++i) { |
| 419 | ret = max77693_set_flash_current(led, i, |
| 420 | max_flash_curr[i]); |
| 421 | if (ret < 0) |
| 422 | return ret; |
| 423 | } |
| 424 | |
| 425 | v = TORCH_TMR_NO_TIMER | MAX77693_LED_TRIG_TYPE_LEVEL; |
| 426 | ret = regmap_write(rmap, MAX77693_LED_REG_ITORCHTIMER, v); |
| 427 | if (ret < 0) |
| 428 | return ret; |
| 429 | |
| 430 | if (led_cfg->low_vsys > 0) |
| 431 | v = max77693_led_vsys_to_reg(led_cfg->low_vsys) | |
| 432 | MAX_FLASH1_MAX_FL_EN; |
| 433 | else |
| 434 | v = 0; |
| 435 | |
| 436 | ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH1, v); |
| 437 | if (ret < 0) |
| 438 | return ret; |
| 439 | ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH2, 0); |
| 440 | if (ret < 0) |
| 441 | return ret; |
| 442 | |
| 443 | if (led_cfg->boost_mode == MAX77693_LED_BOOST_FIXED) |
| 444 | v = FLASH_BOOST_FIXED; |
| 445 | else |
| 446 | v = led_cfg->boost_mode | led_cfg->boost_mode << 1; |
| 447 | |
| 448 | if (max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2)) |
| 449 | v |= FLASH_BOOST_LEDNUM_2; |
| 450 | |
| 451 | ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_CNTL, v); |
| 452 | if (ret < 0) |
| 453 | return ret; |
| 454 | |
| 455 | v = max77693_led_vout_to_reg(led_cfg->boost_vout); |
| 456 | ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_FLASH1, v); |
| 457 | if (ret < 0) |
| 458 | return ret; |
| 459 | |
| 460 | return max77693_set_mode_reg(led, MODE_OFF); |
| 461 | } |
| 462 | |
Jacek Anaszewski | 7edc00d | 2015-10-07 11:10:45 +0200 | [diff] [blame] | 463 | /* LED subsystem callbacks */ |
| 464 | static int max77693_led_brightness_set(struct led_classdev *led_cdev, |
| 465 | enum led_brightness value) |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 466 | { |
Jacek Anaszewski | 7edc00d | 2015-10-07 11:10:45 +0200 | [diff] [blame] | 467 | struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); |
| 468 | struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); |
| 469 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 470 | int fled_id = sub_led->fled_id, ret; |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 471 | |
| 472 | mutex_lock(&led->lock); |
| 473 | |
| 474 | if (value == 0) { |
| 475 | ret = max77693_clear_mode(led, MODE_TORCH(fled_id)); |
| 476 | if (ret < 0) |
| 477 | dev_dbg(&led->pdev->dev, |
| 478 | "Failed to clear torch mode (%d)\n", |
| 479 | ret); |
| 480 | goto unlock; |
| 481 | } |
| 482 | |
| 483 | ret = max77693_set_torch_current(led, fled_id, value * TORCH_IOUT_STEP); |
| 484 | if (ret < 0) { |
| 485 | dev_dbg(&led->pdev->dev, |
| 486 | "Failed to set torch current (%d)\n", |
| 487 | ret); |
| 488 | goto unlock; |
| 489 | } |
| 490 | |
| 491 | ret = max77693_add_mode(led, MODE_TORCH(fled_id)); |
| 492 | if (ret < 0) |
| 493 | dev_dbg(&led->pdev->dev, |
| 494 | "Failed to set torch mode (%d)\n", |
| 495 | ret); |
| 496 | unlock: |
| 497 | mutex_unlock(&led->lock); |
Jacek Anaszewski | 7edc00d | 2015-10-07 11:10:45 +0200 | [diff] [blame] | 498 | |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 499 | return ret; |
| 500 | } |
| 501 | |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 502 | static int max77693_led_flash_brightness_set( |
| 503 | struct led_classdev_flash *fled_cdev, |
| 504 | u32 brightness) |
| 505 | { |
| 506 | struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); |
| 507 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 508 | int ret; |
| 509 | |
| 510 | mutex_lock(&led->lock); |
| 511 | ret = max77693_set_flash_current(led, sub_led->fled_id, brightness); |
| 512 | mutex_unlock(&led->lock); |
| 513 | |
| 514 | return ret; |
| 515 | } |
| 516 | |
| 517 | static int max77693_led_flash_strobe_set( |
| 518 | struct led_classdev_flash *fled_cdev, |
| 519 | bool state) |
| 520 | { |
| 521 | struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); |
| 522 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 523 | int fled_id = sub_led->fled_id; |
| 524 | int ret; |
| 525 | |
| 526 | mutex_lock(&led->lock); |
| 527 | |
| 528 | if (!state) { |
| 529 | ret = max77693_clear_mode(led, MODE_FLASH(fled_id)); |
| 530 | goto unlock; |
| 531 | } |
| 532 | |
| 533 | if (sub_led->flash_timeout != led->current_flash_timeout) { |
| 534 | ret = max77693_set_timeout(led, sub_led->flash_timeout); |
| 535 | if (ret < 0) |
| 536 | goto unlock; |
| 537 | } |
| 538 | |
| 539 | led->strobing_sub_led_id = fled_id; |
| 540 | |
| 541 | ret = max77693_add_mode(led, MODE_FLASH(fled_id)); |
| 542 | if (ret < 0) |
| 543 | goto unlock; |
| 544 | |
| 545 | ret = max77693_get_flash_faults(sub_led); |
| 546 | |
| 547 | unlock: |
| 548 | mutex_unlock(&led->lock); |
| 549 | return ret; |
| 550 | } |
| 551 | |
| 552 | static int max77693_led_flash_fault_get( |
| 553 | struct led_classdev_flash *fled_cdev, |
| 554 | u32 *fault) |
| 555 | { |
| 556 | struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); |
| 557 | |
| 558 | *fault = sub_led->flash_faults; |
| 559 | |
| 560 | return 0; |
| 561 | } |
| 562 | |
| 563 | static int max77693_led_flash_strobe_get( |
| 564 | struct led_classdev_flash *fled_cdev, |
| 565 | bool *state) |
| 566 | { |
| 567 | struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); |
| 568 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 569 | int ret; |
| 570 | |
| 571 | if (!state) |
| 572 | return -EINVAL; |
| 573 | |
| 574 | mutex_lock(&led->lock); |
| 575 | |
| 576 | ret = max77693_get_strobe_status(led, state); |
| 577 | |
| 578 | *state = !!(*state && (led->strobing_sub_led_id == sub_led->fled_id)); |
| 579 | |
| 580 | mutex_unlock(&led->lock); |
| 581 | |
| 582 | return ret; |
| 583 | } |
| 584 | |
| 585 | static int max77693_led_flash_timeout_set( |
| 586 | struct led_classdev_flash *fled_cdev, |
| 587 | u32 timeout) |
| 588 | { |
| 589 | struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); |
| 590 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 591 | |
| 592 | mutex_lock(&led->lock); |
| 593 | sub_led->flash_timeout = timeout; |
| 594 | mutex_unlock(&led->lock); |
| 595 | |
| 596 | return 0; |
| 597 | } |
| 598 | |
| 599 | static int max77693_led_parse_dt(struct max77693_led_device *led, |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 600 | struct max77693_led_config_data *cfg, |
| 601 | struct device_node **sub_nodes) |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 602 | { |
| 603 | struct device *dev = &led->pdev->dev; |
| 604 | struct max77693_sub_led *sub_leds = led->sub_leds; |
| 605 | struct device_node *node = dev->of_node, *child_node; |
| 606 | struct property *prop; |
| 607 | u32 led_sources[2]; |
| 608 | int i, ret, fled_id; |
| 609 | |
| 610 | of_property_read_u32(node, "maxim,boost-mode", &cfg->boost_mode); |
| 611 | of_property_read_u32(node, "maxim,boost-mvout", &cfg->boost_vout); |
| 612 | of_property_read_u32(node, "maxim,mvsys-min", &cfg->low_vsys); |
| 613 | |
| 614 | for_each_available_child_of_node(node, child_node) { |
| 615 | prop = of_find_property(child_node, "led-sources", NULL); |
| 616 | if (prop) { |
| 617 | const __be32 *srcs = NULL; |
| 618 | |
| 619 | for (i = 0; i < ARRAY_SIZE(led_sources); ++i) { |
| 620 | srcs = of_prop_next_u32(prop, srcs, |
| 621 | &led_sources[i]); |
| 622 | if (!srcs) |
| 623 | break; |
| 624 | } |
| 625 | } else { |
| 626 | dev_err(dev, |
| 627 | "led-sources DT property missing\n"); |
| 628 | of_node_put(child_node); |
| 629 | return -EINVAL; |
| 630 | } |
| 631 | |
| 632 | if (i == 2) { |
| 633 | fled_id = FLED1; |
| 634 | led->fled_mask = FLED1_IOUT | FLED2_IOUT; |
| 635 | } else if (led_sources[0] == FLED1) { |
| 636 | fled_id = FLED1; |
| 637 | led->fled_mask |= FLED1_IOUT; |
| 638 | } else if (led_sources[0] == FLED2) { |
| 639 | fled_id = FLED2; |
| 640 | led->fled_mask |= FLED2_IOUT; |
| 641 | } else { |
| 642 | dev_err(dev, |
| 643 | "Wrong led-sources DT property value.\n"); |
| 644 | of_node_put(child_node); |
| 645 | return -EINVAL; |
| 646 | } |
| 647 | |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 648 | if (sub_nodes[fled_id]) { |
| 649 | dev_err(dev, |
| 650 | "Conflicting \"led-sources\" DT properties\n"); |
Jacek Anaszewski | 88911615 | 2015-11-25 09:34:10 +0100 | [diff] [blame] | 651 | of_node_put(child_node); |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 652 | return -EINVAL; |
| 653 | } |
| 654 | |
| 655 | sub_nodes[fled_id] = child_node; |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 656 | sub_leds[fled_id].fled_id = fled_id; |
| 657 | |
| 658 | cfg->label[fled_id] = |
| 659 | of_get_property(child_node, "label", NULL) ? : |
| 660 | child_node->name; |
| 661 | |
| 662 | ret = of_property_read_u32(child_node, "led-max-microamp", |
| 663 | &cfg->iout_torch_max[fled_id]); |
| 664 | if (ret < 0) { |
| 665 | cfg->iout_torch_max[fled_id] = TORCH_IOUT_MIN; |
| 666 | dev_warn(dev, "led-max-microamp DT property missing\n"); |
| 667 | } |
| 668 | |
| 669 | ret = of_property_read_u32(child_node, "flash-max-microamp", |
| 670 | &cfg->iout_flash_max[fled_id]); |
| 671 | if (ret < 0) { |
| 672 | cfg->iout_flash_max[fled_id] = FLASH_IOUT_MIN; |
| 673 | dev_warn(dev, |
| 674 | "flash-max-microamp DT property missing\n"); |
| 675 | } |
| 676 | |
| 677 | ret = of_property_read_u32(child_node, "flash-max-timeout-us", |
| 678 | &cfg->flash_timeout_max[fled_id]); |
| 679 | if (ret < 0) { |
| 680 | cfg->flash_timeout_max[fled_id] = FLASH_TIMEOUT_MIN; |
| 681 | dev_warn(dev, |
| 682 | "flash-max-timeout-us DT property missing\n"); |
| 683 | } |
| 684 | |
| 685 | if (++cfg->num_leds == 2 || |
| 686 | (max77693_fled_used(led, FLED1) && |
| 687 | max77693_fled_used(led, FLED2))) { |
| 688 | of_node_put(child_node); |
| 689 | break; |
| 690 | } |
| 691 | } |
| 692 | |
| 693 | if (cfg->num_leds == 0) { |
| 694 | dev_err(dev, "No DT child node found for connected LED(s).\n"); |
| 695 | return -EINVAL; |
| 696 | } |
| 697 | |
| 698 | return 0; |
| 699 | } |
| 700 | |
| 701 | static void clamp_align(u32 *v, u32 min, u32 max, u32 step) |
| 702 | { |
| 703 | *v = clamp_val(*v, min, max); |
| 704 | if (step > 1) |
| 705 | *v = (*v - min) / step * step + min; |
| 706 | } |
| 707 | |
| 708 | static void max77693_align_iout_current(struct max77693_led_device *led, |
| 709 | u32 *iout, u32 min, u32 max, u32 step) |
| 710 | { |
| 711 | int i; |
| 712 | |
| 713 | if (led->iout_joint) { |
| 714 | if (iout[FLED1] > min) { |
| 715 | iout[FLED1] /= 2; |
| 716 | iout[FLED2] = iout[FLED1]; |
| 717 | } else { |
| 718 | iout[FLED1] = min; |
| 719 | iout[FLED2] = 0; |
| 720 | return; |
| 721 | } |
| 722 | } |
| 723 | |
| 724 | for (i = FLED1; i <= FLED2; ++i) |
| 725 | if (max77693_fled_used(led, i)) |
| 726 | clamp_align(&iout[i], min, max, step); |
| 727 | else |
| 728 | iout[i] = 0; |
| 729 | } |
| 730 | |
| 731 | static void max77693_led_validate_configuration(struct max77693_led_device *led, |
| 732 | struct max77693_led_config_data *cfg) |
| 733 | { |
| 734 | u32 flash_iout_max = cfg->boost_mode ? FLASH_IOUT_MAX_2LEDS : |
| 735 | FLASH_IOUT_MAX_1LED; |
| 736 | int i; |
| 737 | |
| 738 | if (cfg->num_leds == 1 && |
| 739 | max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2)) |
| 740 | led->iout_joint = true; |
| 741 | |
| 742 | cfg->boost_mode = clamp_val(cfg->boost_mode, MAX77693_LED_BOOST_NONE, |
| 743 | MAX77693_LED_BOOST_FIXED); |
| 744 | |
| 745 | /* Boost must be enabled if both current outputs are used */ |
| 746 | if ((cfg->boost_mode == MAX77693_LED_BOOST_NONE) && led->iout_joint) |
| 747 | cfg->boost_mode = MAX77693_LED_BOOST_FIXED; |
| 748 | |
| 749 | max77693_align_iout_current(led, cfg->iout_torch_max, |
| 750 | TORCH_IOUT_MIN, TORCH_IOUT_MAX, TORCH_IOUT_STEP); |
| 751 | |
| 752 | max77693_align_iout_current(led, cfg->iout_flash_max, |
| 753 | FLASH_IOUT_MIN, flash_iout_max, FLASH_IOUT_STEP); |
| 754 | |
| 755 | for (i = 0; i < ARRAY_SIZE(cfg->flash_timeout_max); ++i) |
| 756 | clamp_align(&cfg->flash_timeout_max[i], FLASH_TIMEOUT_MIN, |
| 757 | FLASH_TIMEOUT_MAX, FLASH_TIMEOUT_STEP); |
| 758 | |
| 759 | clamp_align(&cfg->boost_vout, FLASH_VOUT_MIN, FLASH_VOUT_MAX, |
| 760 | FLASH_VOUT_STEP); |
| 761 | |
| 762 | if (cfg->low_vsys) |
| 763 | clamp_align(&cfg->low_vsys, MAX_FLASH1_VSYS_MIN, |
| 764 | MAX_FLASH1_VSYS_MAX, MAX_FLASH1_VSYS_STEP); |
| 765 | } |
| 766 | |
| 767 | static int max77693_led_get_configuration(struct max77693_led_device *led, |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 768 | struct max77693_led_config_data *cfg, |
| 769 | struct device_node **sub_nodes) |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 770 | { |
| 771 | int ret; |
| 772 | |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 773 | ret = max77693_led_parse_dt(led, cfg, sub_nodes); |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 774 | if (ret < 0) |
| 775 | return ret; |
| 776 | |
| 777 | max77693_led_validate_configuration(led, cfg); |
| 778 | |
| 779 | memcpy(led->iout_torch_max, cfg->iout_torch_max, |
| 780 | sizeof(led->iout_torch_max)); |
| 781 | memcpy(led->iout_flash_max, cfg->iout_flash_max, |
| 782 | sizeof(led->iout_flash_max)); |
| 783 | |
| 784 | return 0; |
| 785 | } |
| 786 | |
| 787 | static const struct led_flash_ops flash_ops = { |
| 788 | .flash_brightness_set = max77693_led_flash_brightness_set, |
| 789 | .strobe_set = max77693_led_flash_strobe_set, |
| 790 | .strobe_get = max77693_led_flash_strobe_get, |
| 791 | .timeout_set = max77693_led_flash_timeout_set, |
| 792 | .fault_get = max77693_led_flash_fault_get, |
| 793 | }; |
| 794 | |
| 795 | static void max77693_init_flash_settings(struct max77693_sub_led *sub_led, |
| 796 | struct max77693_led_config_data *led_cfg) |
| 797 | { |
| 798 | struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev; |
| 799 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 800 | int fled_id = sub_led->fled_id; |
| 801 | struct led_flash_setting *setting; |
| 802 | |
| 803 | /* Init flash intensity setting */ |
| 804 | setting = &fled_cdev->brightness; |
| 805 | setting->min = FLASH_IOUT_MIN; |
| 806 | setting->max = led->iout_joint ? |
| 807 | led_cfg->iout_flash_max[FLED1] + |
| 808 | led_cfg->iout_flash_max[FLED2] : |
| 809 | led_cfg->iout_flash_max[fled_id]; |
| 810 | setting->step = FLASH_IOUT_STEP; |
| 811 | setting->val = setting->max; |
| 812 | |
| 813 | /* Init flash timeout setting */ |
| 814 | setting = &fled_cdev->timeout; |
| 815 | setting->min = FLASH_TIMEOUT_MIN; |
| 816 | setting->max = led_cfg->flash_timeout_max[fled_id]; |
| 817 | setting->step = FLASH_TIMEOUT_STEP; |
| 818 | setting->val = setting->max; |
| 819 | } |
| 820 | |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 821 | #if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) |
| 822 | |
| 823 | static int max77693_led_external_strobe_set( |
| 824 | struct v4l2_flash *v4l2_flash, |
| 825 | bool enable) |
| 826 | { |
| 827 | struct max77693_sub_led *sub_led = |
| 828 | flcdev_to_sub_led(v4l2_flash->fled_cdev); |
| 829 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 830 | int fled_id = sub_led->fled_id; |
| 831 | int ret; |
| 832 | |
| 833 | mutex_lock(&led->lock); |
| 834 | |
| 835 | if (enable) |
| 836 | ret = max77693_add_mode(led, MODE_FLASH_EXTERNAL(fled_id)); |
| 837 | else |
| 838 | ret = max77693_clear_mode(led, MODE_FLASH_EXTERNAL(fled_id)); |
| 839 | |
| 840 | mutex_unlock(&led->lock); |
| 841 | |
| 842 | return ret; |
| 843 | } |
| 844 | |
| 845 | static void max77693_init_v4l2_flash_config(struct max77693_sub_led *sub_led, |
| 846 | struct max77693_led_config_data *led_cfg, |
| 847 | struct v4l2_flash_config *v4l2_sd_cfg) |
| 848 | { |
| 849 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 850 | struct device *dev = &led->pdev->dev; |
| 851 | struct max77693_dev *iodev = dev_get_drvdata(dev->parent); |
| 852 | struct i2c_client *i2c = iodev->i2c; |
| 853 | struct led_flash_setting *s; |
| 854 | |
| 855 | snprintf(v4l2_sd_cfg->dev_name, sizeof(v4l2_sd_cfg->dev_name), |
| 856 | "%s %d-%04x", sub_led->fled_cdev.led_cdev.name, |
| 857 | i2c_adapter_id(i2c->adapter), i2c->addr); |
| 858 | |
| 859 | s = &v4l2_sd_cfg->torch_intensity; |
| 860 | s->min = TORCH_IOUT_MIN; |
| 861 | s->max = sub_led->fled_cdev.led_cdev.max_brightness * TORCH_IOUT_STEP; |
| 862 | s->step = TORCH_IOUT_STEP; |
| 863 | s->val = s->max; |
| 864 | |
| 865 | /* Init flash faults config */ |
| 866 | v4l2_sd_cfg->flash_faults = LED_FAULT_OVER_VOLTAGE | |
| 867 | LED_FAULT_SHORT_CIRCUIT | |
| 868 | LED_FAULT_OVER_CURRENT; |
| 869 | |
| 870 | v4l2_sd_cfg->has_external_strobe = true; |
| 871 | } |
| 872 | |
| 873 | static const struct v4l2_flash_ops v4l2_flash_ops = { |
| 874 | .external_strobe_set = max77693_led_external_strobe_set, |
| 875 | }; |
| 876 | #else |
| 877 | static inline void max77693_init_v4l2_flash_config( |
| 878 | struct max77693_sub_led *sub_led, |
| 879 | struct max77693_led_config_data *led_cfg, |
| 880 | struct v4l2_flash_config *v4l2_sd_cfg) |
| 881 | { |
| 882 | } |
| 883 | static const struct v4l2_flash_ops v4l2_flash_ops; |
| 884 | #endif |
| 885 | |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 886 | static void max77693_init_fled_cdev(struct max77693_sub_led *sub_led, |
| 887 | struct max77693_led_config_data *led_cfg) |
| 888 | { |
| 889 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 890 | int fled_id = sub_led->fled_id; |
| 891 | struct led_classdev_flash *fled_cdev; |
| 892 | struct led_classdev *led_cdev; |
| 893 | |
| 894 | /* Initialize LED Flash class device */ |
| 895 | fled_cdev = &sub_led->fled_cdev; |
| 896 | fled_cdev->ops = &flash_ops; |
| 897 | led_cdev = &fled_cdev->led_cdev; |
| 898 | |
| 899 | led_cdev->name = led_cfg->label[fled_id]; |
| 900 | |
Jacek Anaszewski | 7edc00d | 2015-10-07 11:10:45 +0200 | [diff] [blame] | 901 | led_cdev->brightness_set_blocking = max77693_led_brightness_set; |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 902 | led_cdev->max_brightness = (led->iout_joint ? |
| 903 | led_cfg->iout_torch_max[FLED1] + |
| 904 | led_cfg->iout_torch_max[FLED2] : |
| 905 | led_cfg->iout_torch_max[fled_id]) / |
| 906 | TORCH_IOUT_STEP; |
| 907 | led_cdev->flags |= LED_DEV_CAP_FLASH; |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 908 | |
| 909 | max77693_init_flash_settings(sub_led, led_cfg); |
| 910 | |
| 911 | /* Init flash timeout cache */ |
| 912 | sub_led->flash_timeout = fled_cdev->timeout.val; |
| 913 | } |
| 914 | |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 915 | static int max77693_register_led(struct max77693_sub_led *sub_led, |
| 916 | struct max77693_led_config_data *led_cfg, |
| 917 | struct device_node *sub_node) |
| 918 | { |
| 919 | struct max77693_led_device *led = sub_led_to_led(sub_led); |
| 920 | struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev; |
| 921 | struct device *dev = &led->pdev->dev; |
| 922 | struct v4l2_flash_config v4l2_sd_cfg = {}; |
| 923 | int ret; |
| 924 | |
| 925 | /* Register in the LED subsystem */ |
| 926 | ret = led_classdev_flash_register(dev, fled_cdev); |
| 927 | if (ret < 0) |
| 928 | return ret; |
| 929 | |
| 930 | max77693_init_v4l2_flash_config(sub_led, led_cfg, &v4l2_sd_cfg); |
| 931 | |
| 932 | /* Register in the V4L2 subsystem. */ |
| 933 | sub_led->v4l2_flash = v4l2_flash_init(dev, sub_node, fled_cdev, NULL, |
| 934 | &v4l2_flash_ops, &v4l2_sd_cfg); |
| 935 | if (IS_ERR(sub_led->v4l2_flash)) { |
| 936 | ret = PTR_ERR(sub_led->v4l2_flash); |
| 937 | goto err_v4l2_flash_init; |
| 938 | } |
| 939 | |
| 940 | return 0; |
| 941 | |
| 942 | err_v4l2_flash_init: |
| 943 | led_classdev_flash_unregister(fled_cdev); |
| 944 | return ret; |
| 945 | } |
| 946 | |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 947 | static int max77693_led_probe(struct platform_device *pdev) |
| 948 | { |
| 949 | struct device *dev = &pdev->dev; |
| 950 | struct max77693_dev *iodev = dev_get_drvdata(dev->parent); |
| 951 | struct max77693_led_device *led; |
| 952 | struct max77693_sub_led *sub_leds; |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 953 | struct device_node *sub_nodes[2] = {}; |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 954 | struct max77693_led_config_data led_cfg = {}; |
| 955 | int init_fled_cdev[2], i, ret; |
| 956 | |
| 957 | led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL); |
| 958 | if (!led) |
| 959 | return -ENOMEM; |
| 960 | |
| 961 | led->pdev = pdev; |
| 962 | led->regmap = iodev->regmap; |
| 963 | led->allowed_modes = MODE_FLASH_MASK; |
| 964 | sub_leds = led->sub_leds; |
| 965 | |
| 966 | platform_set_drvdata(pdev, led); |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 967 | ret = max77693_led_get_configuration(led, &led_cfg, sub_nodes); |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 968 | if (ret < 0) |
| 969 | return ret; |
| 970 | |
| 971 | ret = max77693_setup(led, &led_cfg); |
| 972 | if (ret < 0) |
| 973 | return ret; |
| 974 | |
| 975 | mutex_init(&led->lock); |
| 976 | |
| 977 | init_fled_cdev[FLED1] = |
| 978 | led->iout_joint || max77693_fled_used(led, FLED1); |
| 979 | init_fled_cdev[FLED2] = |
| 980 | !led->iout_joint && max77693_fled_used(led, FLED2); |
| 981 | |
| 982 | for (i = FLED1; i <= FLED2; ++i) { |
| 983 | if (!init_fled_cdev[i]) |
| 984 | continue; |
| 985 | |
| 986 | /* Initialize LED Flash class device */ |
| 987 | max77693_init_fled_cdev(&sub_leds[i], &led_cfg); |
| 988 | |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 989 | /* |
| 990 | * Register LED Flash class device and corresponding |
| 991 | * V4L2 Flash device. |
| 992 | */ |
| 993 | ret = max77693_register_led(&sub_leds[i], &led_cfg, |
| 994 | sub_nodes[i]); |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 995 | if (ret < 0) { |
| 996 | /* |
| 997 | * At this moment FLED1 might have been already |
| 998 | * registered and it needs to be released. |
| 999 | */ |
| 1000 | if (i == FLED2) |
| 1001 | goto err_register_led2; |
| 1002 | else |
| 1003 | goto err_register_led1; |
| 1004 | } |
| 1005 | } |
| 1006 | |
| 1007 | return 0; |
| 1008 | |
| 1009 | err_register_led2: |
| 1010 | /* It is possible than only FLED2 was to be registered */ |
| 1011 | if (!init_fled_cdev[FLED1]) |
| 1012 | goto err_register_led1; |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 1013 | v4l2_flash_release(sub_leds[FLED1].v4l2_flash); |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 1014 | led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev); |
| 1015 | err_register_led1: |
| 1016 | mutex_destroy(&led->lock); |
| 1017 | |
| 1018 | return ret; |
| 1019 | } |
| 1020 | |
| 1021 | static int max77693_led_remove(struct platform_device *pdev) |
| 1022 | { |
| 1023 | struct max77693_led_device *led = platform_get_drvdata(pdev); |
| 1024 | struct max77693_sub_led *sub_leds = led->sub_leds; |
| 1025 | |
| 1026 | if (led->iout_joint || max77693_fled_used(led, FLED1)) { |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 1027 | v4l2_flash_release(sub_leds[FLED1].v4l2_flash); |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 1028 | led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev); |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 1029 | } |
| 1030 | |
| 1031 | if (!led->iout_joint && max77693_fled_used(led, FLED2)) { |
Jacek Anaszewski | 0b38018 | 2015-06-08 02:02:20 -0700 | [diff] [blame] | 1032 | v4l2_flash_release(sub_leds[FLED2].v4l2_flash); |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 1033 | led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev); |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 1034 | } |
| 1035 | |
| 1036 | mutex_destroy(&led->lock); |
| 1037 | |
| 1038 | return 0; |
| 1039 | } |
| 1040 | |
| 1041 | static const struct of_device_id max77693_led_dt_match[] = { |
| 1042 | { .compatible = "maxim,max77693-led" }, |
| 1043 | {}, |
| 1044 | }; |
Luis de Bethencourt | e3df661 | 2015-09-01 23:36:41 +0200 | [diff] [blame] | 1045 | MODULE_DEVICE_TABLE(of, max77693_led_dt_match); |
Jacek Anaszewski | a43f6a8 | 2015-04-30 03:35:10 -0700 | [diff] [blame] | 1046 | |
| 1047 | static struct platform_driver max77693_led_driver = { |
| 1048 | .probe = max77693_led_probe, |
| 1049 | .remove = max77693_led_remove, |
| 1050 | .driver = { |
| 1051 | .name = "max77693-led", |
| 1052 | .of_match_table = max77693_led_dt_match, |
| 1053 | }, |
| 1054 | }; |
| 1055 | |
| 1056 | module_platform_driver(max77693_led_driver); |
| 1057 | |
| 1058 | MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>"); |
| 1059 | MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>"); |
| 1060 | MODULE_DESCRIPTION("Maxim MAX77693 led flash driver"); |
| 1061 | MODULE_LICENSE("GPL v2"); |