Sean Cross | 70a8c03 | 2015-12-18 06:29:50 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2015 Sutajio Ko-Usagi PTE LTD |
| 3 | * |
| 4 | * This file is dual-licensed: you can use it either under the terms |
| 5 | * of the GPL or the X11 license, at your option. Note that this dual |
| 6 | * licensing only applies to this file, and not this project as a |
| 7 | * whole. |
| 8 | * |
| 9 | * a) This file is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License as |
| 11 | * published by the Free Software Foundation; either version 2 of |
| 12 | * the License, or (at your option) any later version. |
| 13 | * |
| 14 | * This file is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public |
| 20 | * License along with this file; if not, write to the Free |
| 21 | * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| 22 | * MA 02110-1301 USA |
| 23 | * |
| 24 | * Or, alternatively, |
| 25 | * |
| 26 | * b) Permission is hereby granted, free of charge, to any person |
| 27 | * obtaining a copy of this software and associated documentation |
| 28 | * files (the "Software"), to deal in the Software without |
| 29 | * restriction, including without limitation the rights to use, |
| 30 | * copy, modify, merge, publish, distribute, sublicense, and/or |
| 31 | * sell copies of the Software, and to permit persons to whom the |
| 32 | * Software is furnished to do so, subject to the following |
| 33 | * conditions: |
| 34 | * |
| 35 | * The above copyright notice and this permission notice shall be |
| 36 | * included in all copies or substantial portions of the Software. |
| 37 | * |
| 38 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 39 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 40 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 41 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 42 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 43 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 44 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 45 | * OTHER DEALINGS IN THE SOFTWARE. |
| 46 | * |
| 47 | */ |
| 48 | |
| 49 | /dts-v1/; |
| 50 | #include "imx6q.dtsi" |
| 51 | #include <dt-bindings/gpio/gpio.h> |
| 52 | #include <dt-bindings/input/input.h> |
| 53 | |
| 54 | / { |
| 55 | model = "Kosagi Novena Dual/Quad"; |
| 56 | compatible = "kosagi,imx6q-novena", "fsl,imx6q"; |
| 57 | |
| 58 | chosen { |
| 59 | stdout-path = &uart2; |
| 60 | }; |
| 61 | |
| 62 | backlight: backlight { |
| 63 | compatible = "pwm-backlight"; |
| 64 | pwms = <&pwm1 0 10000000>; |
| 65 | pinctrl-names = "default"; |
| 66 | pinctrl-0 = <&pinctrl_backlight_novena>; |
| 67 | power-supply = <®_lvds_lcd>; |
| 68 | brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>; |
| 69 | default-brightness-level = <12>; |
| 70 | }; |
| 71 | |
| 72 | gpio-keys { |
| 73 | compatible = "gpio-keys"; |
| 74 | pinctrl-names = "default"; |
| 75 | pinctrl-0 = <&pinctrl_gpio_keys_novena>; |
| 76 | |
| 77 | user-button { |
| 78 | label = "User Button"; |
| 79 | gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; |
| 80 | linux,code = <KEY_POWER>; |
| 81 | }; |
| 82 | |
| 83 | lid { |
| 84 | label = "Lid"; |
| 85 | gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; |
| 86 | linux,input-type = <5>; /* EV_SW */ |
| 87 | linux,code = <0>; /* SW_LID */ |
| 88 | }; |
| 89 | }; |
| 90 | |
| 91 | leds { |
| 92 | compatible = "gpio-leds"; |
| 93 | pinctrl-names = "default"; |
| 94 | pinctrl-0 = <&pinctrl_leds_novena>; |
| 95 | |
| 96 | heartbeat { |
| 97 | label = "novena:white:panel"; |
| 98 | gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; |
| 99 | linux,default-trigger = "default-on"; |
| 100 | }; |
| 101 | }; |
| 102 | |
| 103 | panel: panel { |
| 104 | compatible = "innolux,n133hse-ea1", "simple-panel"; |
| 105 | backlight = <&backlight>; |
| 106 | }; |
| 107 | |
| 108 | reg_2p5v: regulator-2p5v { |
| 109 | compatible = "regulator-fixed"; |
| 110 | regulator-name = "2P5V"; |
| 111 | regulator-min-microvolt = <2500000>; |
| 112 | regulator-max-microvolt = <2500000>; |
| 113 | regulator-always-on; |
| 114 | }; |
| 115 | |
| 116 | reg_3p3v: regulator-3p3v { |
| 117 | compatible = "regulator-fixed"; |
| 118 | regulator-name = "3P3V"; |
| 119 | regulator-min-microvolt = <3300000>; |
| 120 | regulator-max-microvolt = <3300000>; |
| 121 | regulator-always-on; |
| 122 | }; |
| 123 | |
| 124 | reg_audio_codec: regulator-audio-codec { |
| 125 | compatible = "regulator-fixed"; |
| 126 | regulator-name = "es8328-power"; |
| 127 | regulator-boot-on; |
| 128 | regulator-min-microvolt = <5000000>; |
| 129 | regulator-max-microvolt = <5000000>; |
| 130 | startup-delay-us = <400000>; |
| 131 | gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; |
| 132 | enable-active-high; |
| 133 | }; |
| 134 | |
| 135 | reg_display: regulator-display { |
| 136 | compatible = "regulator-fixed"; |
| 137 | regulator-name = "lcd-display-power"; |
| 138 | regulator-min-microvolt = <3300000>; |
| 139 | regulator-max-microvolt = <3300000>; |
| 140 | startup-delay-us = <200000>; |
| 141 | gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>; |
| 142 | enable-active-high; |
| 143 | }; |
| 144 | |
| 145 | reg_lvds_lcd: regulator-lvds-lcd { |
| 146 | compatible = "regulator-fixed"; |
| 147 | regulator-name = "lcd-lvds-power"; |
| 148 | regulator-min-microvolt = <3300000>; |
| 149 | regulator-max-microvolt = <3300000>; |
| 150 | gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; |
| 151 | enable-active-high; |
| 152 | }; |
| 153 | |
| 154 | reg_pcie: regulator-pcie { |
| 155 | compatible = "regulator-fixed"; |
| 156 | regulator-name = "pcie-bus-power"; |
| 157 | regulator-min-microvolt = <1500000>; |
| 158 | regulator-max-microvolt = <1500000>; |
| 159 | gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; |
| 160 | enable-active-high; |
| 161 | regulator-always-on; |
| 162 | }; |
| 163 | |
| 164 | reg_sata: regulator-sata { |
| 165 | compatible = "regulator-fixed"; |
| 166 | regulator-name = "sata-power"; |
| 167 | regulator-boot-on; |
| 168 | regulator-min-microvolt = <3300000>; |
| 169 | regulator-max-microvolt = <3300000>; |
| 170 | startup-delay-us = <10000>; |
| 171 | gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; |
| 172 | enable-active-high; |
| 173 | }; |
| 174 | |
| 175 | reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| 176 | compatible = "regulator-fixed"; |
| 177 | regulator-name = "usb_otg_vbus"; |
| 178 | regulator-min-microvolt = <5000000>; |
| 179 | regulator-max-microvolt = <5000000>; |
| 180 | enable-active-high; |
| 181 | }; |
| 182 | |
| 183 | sound { |
| 184 | compatible = "fsl,imx-audio-es8328"; |
| 185 | model = "imx-audio-es8328"; |
| 186 | ssi-controller = <&ssi1>; |
| 187 | audio-codec = <&codec>; |
| 188 | audio-amp-supply = <®_audio_codec>; |
| 189 | jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>; |
| 190 | audio-routing = |
| 191 | "Speaker", "LOUT2", |
| 192 | "Speaker", "ROUT2", |
| 193 | "Speaker", "audio-amp", |
| 194 | "Headphone", "ROUT1", |
| 195 | "Headphone", "LOUT1", |
| 196 | "LINPUT1", "Mic Jack", |
| 197 | "RINPUT1", "Mic Jack", |
| 198 | "Mic Jack", "Mic Bias"; |
| 199 | mux-int-port = <0x1>; |
| 200 | mux-ext-port = <0x3>; |
| 201 | }; |
| 202 | }; |
| 203 | |
| 204 | &audmux { |
| 205 | pinctrl-names = "default"; |
| 206 | pinctrl-0 = <&pinctrl_audmux_novena>; |
| 207 | status = "okay"; |
| 208 | }; |
| 209 | |
| 210 | &ecspi3 { |
| 211 | pinctrl-names = "default"; |
| 212 | pinctrl-0 = <&pinctrl_ecspi3_novena>; |
| 213 | fsl,spi-num-chipselects = <3>; |
| 214 | status = "okay"; |
| 215 | }; |
| 216 | |
| 217 | &fec { |
| 218 | pinctrl-names = "default"; |
| 219 | pinctrl-0 = <&pinctrl_enet_novena>; |
| 220 | phy-mode = "rgmii"; |
| 221 | phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| 222 | rxc-skew-ps = <3000>; |
| 223 | rxdv-skew-ps = <0>; |
| 224 | txc-skew-ps = <3000>; |
| 225 | txen-skew-ps = <0>; |
| 226 | rxd0-skew-ps = <0>; |
| 227 | rxd1-skew-ps = <0>; |
| 228 | rxd2-skew-ps = <0>; |
| 229 | rxd3-skew-ps = <0>; |
| 230 | txd0-skew-ps = <3000>; |
| 231 | txd1-skew-ps = <3000>; |
| 232 | txd2-skew-ps = <3000>; |
| 233 | txd3-skew-ps = <3000>; |
| 234 | status = "okay"; |
| 235 | }; |
| 236 | |
| 237 | &hdmi { |
| 238 | pinctrl-names = "default"; |
| 239 | pinctrl-0 = <&pinctrl_hdmi_novena>; |
| 240 | ddc-i2c-bus = <&i2c2>; |
| 241 | status = "okay"; |
| 242 | }; |
| 243 | |
| 244 | &i2c1 { |
| 245 | pinctrl-names = "default"; |
| 246 | pinctrl-0 = <&pinctrl_i2c1_novena>; |
| 247 | status = "okay"; |
| 248 | |
| 249 | accel: mma8452@1c { |
| 250 | compatible = "fsl,mma8452"; |
| 251 | reg = <0x1c>; |
| 252 | }; |
| 253 | |
| 254 | rtc: pcf8523@68 { |
| 255 | compatible = "nxp,pcf8523"; |
| 256 | reg = <0x68>; |
| 257 | }; |
| 258 | |
| 259 | sbs_battery: bq20z75@0b { |
| 260 | compatible = "sbs,sbs-battery"; |
| 261 | reg = <0x0b>; |
| 262 | sbs,i2c-retry-count = <50>; |
| 263 | }; |
| 264 | |
| 265 | touch: stmpe811@44 { |
| 266 | compatible = "st,stmpe811"; |
| 267 | reg = <0x44>; |
| 268 | #address-cells = <1>; |
| 269 | #size-cells = <0>; |
| 270 | irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; |
| 271 | id = <0>; |
| 272 | blocks = <0x5>; |
| 273 | irq-trigger = <0x1>; |
| 274 | pinctrl-names = "default"; |
| 275 | pinctrl-0 = <&pinctrl_stmpe_novena>; |
| 276 | vio-supply = <®_3p3v>; |
| 277 | vcc-supply = <®_3p3v>; |
| 278 | |
| 279 | stmpe_touchscreen { |
| 280 | compatible = "st,stmpe-ts"; |
| 281 | st,sample-time = <4>; |
| 282 | st,mod-12b = <1>; |
| 283 | st,ref-sel = <0>; |
| 284 | st,adc-freq = <1>; |
| 285 | st,ave-ctrl = <1>; |
| 286 | st,touch-det-delay = <2>; |
| 287 | st,settling = <2>; |
| 288 | st,fraction-z = <7>; |
| 289 | st,i-drive = <1>; |
| 290 | }; |
| 291 | }; |
| 292 | }; |
| 293 | |
| 294 | &i2c2 { |
| 295 | pinctrl-names = "default"; |
| 296 | pinctrl-0 = <&pinctrl_i2c2_novena>; |
| 297 | status = "okay"; |
| 298 | |
| 299 | pmic: pfuze100@08 { |
| 300 | compatible = "fsl,pfuze100"; |
| 301 | reg = <0x08>; |
| 302 | |
| 303 | regulators { |
| 304 | reg_sw1a: sw1a { |
| 305 | regulator-min-microvolt = <300000>; |
| 306 | regulator-max-microvolt = <1875000>; |
| 307 | regulator-boot-on; |
| 308 | regulator-always-on; |
| 309 | regulator-ramp-delay = <6250>; |
| 310 | }; |
| 311 | |
| 312 | reg_sw1c: sw1c { |
| 313 | regulator-min-microvolt = <300000>; |
| 314 | regulator-max-microvolt = <1875000>; |
| 315 | regulator-boot-on; |
| 316 | regulator-always-on; |
| 317 | }; |
| 318 | |
| 319 | reg_sw2: sw2 { |
| 320 | regulator-min-microvolt = <800000>; |
| 321 | regulator-max-microvolt = <3300000>; |
| 322 | regulator-boot-on; |
| 323 | regulator-always-on; |
| 324 | }; |
| 325 | |
| 326 | reg_sw3a: sw3a { |
| 327 | regulator-min-microvolt = <400000>; |
| 328 | regulator-max-microvolt = <1975000>; |
| 329 | regulator-boot-on; |
| 330 | regulator-always-on; |
| 331 | }; |
| 332 | |
| 333 | reg_sw3b: sw3b { |
| 334 | regulator-min-microvolt = <400000>; |
| 335 | regulator-max-microvolt = <1975000>; |
| 336 | regulator-boot-on; |
| 337 | regulator-always-on; |
| 338 | }; |
| 339 | |
| 340 | reg_sw4: sw4 { |
| 341 | regulator-min-microvolt = <800000>; |
| 342 | regulator-max-microvolt = <3300000>; |
| 343 | }; |
| 344 | |
| 345 | reg_swbst: swbst { |
| 346 | regulator-min-microvolt = <5000000>; |
| 347 | regulator-max-microvolt = <5150000>; |
| 348 | regulator-boot-on; |
| 349 | }; |
| 350 | |
| 351 | reg_snvs: vsnvs { |
| 352 | regulator-min-microvolt = <1000000>; |
| 353 | regulator-max-microvolt = <3000000>; |
| 354 | regulator-boot-on; |
| 355 | regulator-always-on; |
| 356 | }; |
| 357 | |
| 358 | reg_vref: vrefddr { |
| 359 | regulator-boot-on; |
| 360 | regulator-always-on; |
| 361 | }; |
| 362 | |
| 363 | reg_vgen1: vgen1 { |
| 364 | regulator-min-microvolt = <800000>; |
| 365 | regulator-max-microvolt = <1550000>; |
| 366 | }; |
| 367 | |
| 368 | reg_vgen2: vgen2 { |
| 369 | regulator-min-microvolt = <800000>; |
| 370 | regulator-max-microvolt = <1550000>; |
| 371 | }; |
| 372 | |
| 373 | reg_vgen3: vgen3 { |
| 374 | regulator-min-microvolt = <1800000>; |
| 375 | regulator-max-microvolt = <3300000>; |
| 376 | }; |
| 377 | |
| 378 | reg_vgen4: vgen4 { |
| 379 | regulator-min-microvolt = <1800000>; |
| 380 | regulator-max-microvolt = <3300000>; |
| 381 | regulator-always-on; |
| 382 | }; |
| 383 | |
| 384 | reg_vgen5: vgen5 { |
| 385 | regulator-min-microvolt = <1800000>; |
| 386 | regulator-max-microvolt = <3300000>; |
| 387 | regulator-always-on; |
| 388 | }; |
| 389 | |
| 390 | reg_vgen6: vgen6 { |
| 391 | regulator-min-microvolt = <1800000>; |
| 392 | regulator-max-microvolt = <3300000>; |
| 393 | regulator-always-on; |
| 394 | }; |
| 395 | }; |
| 396 | }; |
| 397 | }; |
| 398 | |
| 399 | &i2c3 { |
| 400 | pinctrl-names = "default"; |
| 401 | pinctrl-0 = <&pinctrl_i2c3_novena>; |
| 402 | status = "okay"; |
| 403 | |
| 404 | codec: es8328@11 { |
| 405 | compatible = "everest,es8328"; |
| 406 | reg = <0x11>; |
| 407 | DVDD-supply = <®_audio_codec>; |
| 408 | AVDD-supply = <®_audio_codec>; |
| 409 | PVDD-supply = <®_audio_codec>; |
| 410 | HPVDD-supply = <®_audio_codec>; |
| 411 | pinctrl-names = "default"; |
| 412 | pinctrl-0 = <&pinctrl_sound_novena>; |
| 413 | clocks = <&clks IMX6QDL_CLK_CKO1>; |
| 414 | assigned-clocks = <&clks IMX6QDL_CLK_CKO>, |
| 415 | <&clks IMX6QDL_CLK_CKO1_SEL>, |
| 416 | <&clks IMX6QDL_CLK_PLL4_AUDIO>, |
| 417 | <&clks IMX6QDL_CLK_CKO1>; |
| 418 | assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>, |
| 419 | <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>, |
| 420 | <&clks IMX6QDL_CLK_OSC>, |
| 421 | <&clks IMX6QDL_CLK_CKO1_PODF>; |
| 422 | assigned-clock-rates = <0 0 722534400 22579200>; |
| 423 | }; |
| 424 | }; |
| 425 | |
| 426 | &kpp { |
| 427 | pinctrl-names = "default"; |
| 428 | pinctrl-0 = <&pinctrl_kpp_novena>; |
| 429 | linux,keymap = < |
| 430 | MATRIX_KEY(1, 1, KEY_CONFIG) |
| 431 | >; |
| 432 | status = "okay"; |
| 433 | }; |
| 434 | |
| 435 | &ldb { |
| 436 | fsl,dual-channel; |
| 437 | status = "okay"; |
| 438 | |
| 439 | lvds-channel@0 { |
| 440 | fsl,data-mapping = "jeida"; |
| 441 | fsl,data-width = <24>; |
| 442 | fsl,panel = <&panel>; |
| 443 | status = "okay"; |
| 444 | }; |
| 445 | }; |
| 446 | |
| 447 | &pcie { |
| 448 | pinctrl-names = "default"; |
| 449 | pinctrl-0 = <&pinctrl_pcie_novena>; |
| 450 | reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; |
| 451 | status = "okay"; |
| 452 | }; |
| 453 | |
| 454 | &sata { |
| 455 | target-supply = <®_sata>; |
| 456 | fsl,transmit-level-mV = <1025>; |
| 457 | fsl,transmit-boost-mdB = <0>; |
| 458 | fsl,transmit-atten-16ths = <8>; |
| 459 | status = "okay"; |
| 460 | }; |
| 461 | |
| 462 | &ssi1 { |
| 463 | status = "okay"; |
| 464 | }; |
| 465 | |
| 466 | &uart2 { |
| 467 | pinctrl-names = "default"; |
| 468 | pinctrl-0 = <&pinctrl_uart2_novena>; |
| 469 | status = "okay"; |
| 470 | }; |
| 471 | |
| 472 | &uart3 { |
| 473 | pinctrl-names = "default"; |
| 474 | pinctrl-0 = <&pinctrl_uart3_novena>; |
| 475 | status = "okay"; |
| 476 | }; |
| 477 | |
| 478 | &uart4 { |
| 479 | pinctrl-names = "default"; |
| 480 | pinctrl-0 = <&pinctrl_uart4_novena>; |
| 481 | status = "okay"; |
| 482 | }; |
| 483 | |
| 484 | &usbotg { |
| 485 | vbus-supply = <®_usb_otg_vbus>; |
| 486 | dr_mode = "otg"; |
| 487 | pinctrl-names = "default"; |
| 488 | pinctrl-0 = <&pinctrl_usbotg_novena>; |
| 489 | disable-over-current; |
| 490 | status = "okay"; |
| 491 | }; |
| 492 | |
| 493 | &usbh1 { |
| 494 | vbus-supply = <®_swbst>; |
| 495 | status = "okay"; |
| 496 | }; |
| 497 | |
| 498 | &usdhc2 { |
| 499 | pinctrl-names = "default"; |
| 500 | pinctrl-0 = <&pinctrl_usdhc2_novena>; |
| 501 | cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| 502 | wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; |
| 503 | bus-width = <4>; |
| 504 | status = "okay"; |
| 505 | }; |
| 506 | |
| 507 | &usdhc3 { |
| 508 | pinctrl-names = "default"; |
| 509 | pinctrl-0 = <&pinctrl_usdhc3_novena>; |
| 510 | bus-width = <4>; |
| 511 | non-removable; |
| 512 | status = "okay"; |
| 513 | }; |
| 514 | |
| 515 | &iomuxc { |
| 516 | pinctrl_audmux_novena: audmuxgrp-novena { |
| 517 | fsl,pins = < |
| 518 | MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 |
| 519 | MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 |
| 520 | MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 |
| 521 | MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 |
| 522 | >; |
| 523 | }; |
| 524 | |
| 525 | pinctrl_backlight_novena: backlightgrp-novena { |
| 526 | fsl,pins = < |
| 527 | MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 |
| 528 | MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1 |
| 529 | MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1 |
| 530 | >; |
| 531 | }; |
| 532 | |
| 533 | pinctrl_ecspi3_novena: ecspi3grp-novena { |
| 534 | fsl,pins = < |
| 535 | MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 |
| 536 | MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 |
| 537 | MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 |
| 538 | >; |
| 539 | }; |
| 540 | |
| 541 | pinctrl_enet_novena: enetgrp-novena { |
| 542 | fsl,pins = < |
| 543 | MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| 544 | MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| 545 | MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 |
| 546 | MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b028 |
| 547 | MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b028 |
| 548 | MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b028 |
| 549 | MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b028 |
| 550 | MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028 |
| 551 | MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
Uwe Kleine-König | c007b3a | 2016-07-08 23:22:54 +0200 | [diff] [blame] | 552 | MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| 553 | MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| 554 | MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| 555 | MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| 556 | MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| 557 | MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
Sean Cross | 70a8c03 | 2015-12-18 06:29:50 +0100 | [diff] [blame] | 558 | MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 |
| 559 | /* Ethernet reset */ |
| 560 | MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b1 |
| 561 | >; |
| 562 | }; |
| 563 | |
| 564 | pinctrl_fpga_gpio: fpgagpiogrp-novena { |
| 565 | fsl,pins = < |
| 566 | /* FPGA power */ |
| 567 | MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 |
| 568 | /* Reset */ |
| 569 | MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 |
| 570 | /* FPGA GPIOs */ |
| 571 | MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1 |
| 572 | MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1 |
| 573 | MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 |
| 574 | MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1 |
| 575 | MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 |
| 576 | MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 |
| 577 | MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1 |
| 578 | MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1 |
| 579 | MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1 |
| 580 | MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1 |
| 581 | MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1 |
| 582 | MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1 |
| 583 | MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1 |
| 584 | MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1 |
| 585 | MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1 |
| 586 | MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1 |
| 587 | MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 |
| 588 | MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1 |
| 589 | MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 |
| 590 | MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1 |
| 591 | MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 |
| 592 | MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1 |
| 593 | MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1 |
| 594 | MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1 |
| 595 | MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1 |
| 596 | MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1 |
| 597 | >; |
| 598 | }; |
| 599 | |
| 600 | pinctrl_fpga_eim: fpgaeimgrp-novena { |
| 601 | fsl,pins = < |
| 602 | /* FPGA power */ |
| 603 | MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 |
| 604 | /* Reset */ |
| 605 | MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 |
| 606 | /* FPGA GPIOs */ |
| 607 | MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0f1 |
| 608 | MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0f1 |
| 609 | MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0f1 |
| 610 | MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0f1 |
| 611 | MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0f1 |
| 612 | MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0f1 |
| 613 | MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0f1 |
| 614 | MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0f1 |
| 615 | MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0f1 |
| 616 | MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0f1 |
| 617 | MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0f1 |
| 618 | MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0f1 |
| 619 | MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0f1 |
| 620 | MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0f1 |
| 621 | MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0f1 |
| 622 | MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0f1 |
| 623 | MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0f1 |
| 624 | MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0f1 |
| 625 | MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0f1 |
| 626 | MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0f1 |
| 627 | MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0f1 |
| 628 | MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0f1 |
| 629 | MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0f1 |
| 630 | MX6QDL_PAD_EIM_RW__EIM_RW 0xb0f1 |
| 631 | MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1 |
| 632 | MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0f1 |
| 633 | >; |
| 634 | }; |
| 635 | |
| 636 | pinctrl_gpio_keys_novena: gpiokeysgrp-novena { |
| 637 | fsl,pins = < |
| 638 | /* User button */ |
| 639 | MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 |
| 640 | /* PCIe Wakeup */ |
| 641 | MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1f0e0 |
| 642 | /* Lid switch */ |
| 643 | MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 |
| 644 | >; |
| 645 | }; |
| 646 | |
| 647 | pinctrl_hdmi_novena: hdmigrp-novena { |
| 648 | fsl,pins = < |
| 649 | MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 |
| 650 | MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1 |
| 651 | >; |
| 652 | }; |
| 653 | |
| 654 | pinctrl_i2c1_novena: i2c1grp-novena { |
| 655 | fsl,pins = < |
| 656 | MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 |
| 657 | MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 |
| 658 | >; |
| 659 | }; |
| 660 | |
| 661 | pinctrl_i2c2_novena: i2c2grp-novena { |
| 662 | fsl,pins = < |
| 663 | MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 |
| 664 | MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 |
| 665 | >; |
| 666 | }; |
| 667 | |
| 668 | pinctrl_i2c3_novena: i2c3grp-novena { |
| 669 | fsl,pins = < |
| 670 | MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 |
| 671 | MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 |
| 672 | >; |
| 673 | }; |
| 674 | |
| 675 | pinctrl_kpp_novena: kppgrp-novena { |
| 676 | fsl,pins = < |
| 677 | /* Front panel button */ |
| 678 | MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1 |
| 679 | /* Fake column driver, not connected */ |
| 680 | MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1 |
| 681 | >; |
| 682 | }; |
| 683 | |
| 684 | pinctrl_leds_novena: ledsgrp-novena { |
| 685 | fsl,pins = < |
| 686 | MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b1 |
| 687 | >; |
| 688 | }; |
| 689 | |
| 690 | pinctrl_pcie_novena: pciegrp-novena { |
| 691 | fsl,pins = < |
| 692 | /* Reset */ |
| 693 | MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 |
| 694 | /* Power On */ |
| 695 | MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 |
| 696 | /* Wifi kill */ |
| 697 | MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1 |
| 698 | >; |
| 699 | }; |
| 700 | |
| 701 | pinctrl_sata_novena: satagrp-novena { |
| 702 | fsl,pins = < |
| 703 | MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b1 |
| 704 | >; |
| 705 | }; |
| 706 | |
| 707 | pinctrl_senoko_novena: senokogrp-novena { |
| 708 | fsl,pins = < |
| 709 | /* Senoko IRQ line */ |
| 710 | MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048 |
| 711 | /* Senoko reset line */ |
| 712 | MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1 |
| 713 | >; |
| 714 | }; |
| 715 | |
| 716 | pinctrl_sound_novena: soundgrp-novena { |
| 717 | fsl,pins = < |
| 718 | /* Audio power regulator */ |
| 719 | MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1 |
| 720 | /* Headphone plug */ |
| 721 | MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1 |
| 722 | MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 |
| 723 | >; |
| 724 | }; |
| 725 | |
| 726 | pinctrl_stmpe_novena: stmpegrp-novena { |
| 727 | fsl,pins = < |
| 728 | /* Touchscreen interrupt */ |
| 729 | MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1 |
| 730 | >; |
| 731 | }; |
| 732 | |
| 733 | pinctrl_uart2_novena: uart2grp-novena { |
| 734 | fsl,pins = < |
| 735 | MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 |
| 736 | MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 |
| 737 | >; |
| 738 | }; |
| 739 | |
| 740 | pinctrl_uart3_novena: uart3grp-novena { |
| 741 | fsl,pins = < |
| 742 | MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 |
| 743 | MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 |
| 744 | >; |
| 745 | }; |
| 746 | |
| 747 | pinctrl_uart4_novena: uart4grp-novena { |
| 748 | fsl,pins = < |
| 749 | MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 |
| 750 | MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 |
| 751 | >; |
| 752 | }; |
| 753 | |
| 754 | pinctrl_usbotg_novena: usbotggrp-novena { |
| 755 | fsl,pins = < |
| 756 | MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| 757 | >; |
| 758 | }; |
| 759 | |
| 760 | pinctrl_usdhc2_novena: usdhc2grp-novena { |
| 761 | fsl,pins = < |
| 762 | MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 |
| 763 | MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 |
| 764 | MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 |
| 765 | MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 |
| 766 | MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 |
| 767 | MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 |
| 768 | /* Write protect */ |
| 769 | MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 |
| 770 | /* Card detect */ |
| 771 | MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1 |
| 772 | >; |
| 773 | }; |
| 774 | |
| 775 | pinctrl_usdhc3_novena: usdhc3grp-novena { |
| 776 | fsl,pins = < |
| 777 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 |
| 778 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 |
| 779 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 |
| 780 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 |
| 781 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 |
| 782 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 |
| 783 | >; |
| 784 | }; |
| 785 | }; |