Rhyland Klein | 1291aa4 | 2012-05-08 11:42:39 -0700 | [diff] [blame^] | 1 | TPS65910 Power Management Integrated Circuit |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: "ti,tps65910" or "ti,tps65911" |
| 5 | - reg: I2C slave address |
| 6 | - interrupts: the interrupt outputs of the controller |
| 7 | - #gpio-cells: number of cells to describe a GPIO, this should be 2. |
| 8 | The first cell is the GPIO number. |
| 9 | The second cell is used to specify additional options <unused>. |
| 10 | - gpio-controller: mark the device as a GPIO controller |
| 11 | - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. |
| 12 | The first cell is the IRQ number. |
| 13 | The second cell is the flags, encoded as the trigger masks from |
| 14 | Documentation/devicetree/bindings/interrupts.txt |
| 15 | - regulators: This is the list of child nodes that specify the regulator |
| 16 | initialization data for defined regulators. Not all regulators for the given |
| 17 | device need to be present. The definition for each of these nodes is defined |
| 18 | using the standard binding for regulators found at |
| 19 | Documentation/devicetree/bindings/regulator/regulator.txt. |
| 20 | |
| 21 | The valid names for regulators are: |
| 22 | tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1, |
| 23 | vaux2, vaux33, vmmc |
| 24 | tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, |
| 25 | ldo6, ldo7, ldo8 |
| 26 | |
| 27 | Optional properties: |
| 28 | - ti,vmbch-threshold: (tps65911) main battery charged threshold |
| 29 | comparator. (see VMBCH_VSEL in TPS65910 datasheet) |
| 30 | - ti,vmbch2-threshold: (tps65911) main battery discharged threshold |
| 31 | comparator. (see VMBCH_VSEL in TPS65910 datasheet) |
| 32 | - ti,en-gpio-sleep: enable sleep control for gpios |
| 33 | There should be 9 entries here, one for each gpio. |
| 34 | |
| 35 | Regulator Optional properties: |
| 36 | - ti,regulator-ext-sleep-control: enable external sleep |
| 37 | control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)] |
| 38 | If this property is not defined, it defaults to 0 (not enabled). |
| 39 | |
| 40 | Example: |
| 41 | |
| 42 | pmu: tps65910@d2 { |
| 43 | compatible = "ti,tps65910"; |
| 44 | reg = <0xd2>; |
| 45 | interrupt-parent = <&intc>; |
| 46 | interrupts = < 0 118 0x04 >; |
| 47 | |
| 48 | #gpio-cells = <2>; |
| 49 | gpio-controller; |
| 50 | |
| 51 | #interrupt-cells = <2>; |
| 52 | interrupt-controller; |
| 53 | |
| 54 | ti,vmbch-threshold = 0; |
| 55 | ti,vmbch2-threshold = 0; |
| 56 | |
| 57 | ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; |
| 58 | |
| 59 | regulators { |
| 60 | vdd1_reg: vdd1 { |
| 61 | regulator-min-microvolt = < 600000>; |
| 62 | regulator-max-microvolt = <1500000>; |
| 63 | regulator-always-on; |
| 64 | regulator-boot-on; |
| 65 | ti,regulator-ext-sleep-control = <0>; |
| 66 | }; |
| 67 | vdd2_reg: vdd2 { |
| 68 | regulator-min-microvolt = < 600000>; |
| 69 | regulator-max-microvolt = <1500000>; |
| 70 | regulator-always-on; |
| 71 | regulator-boot-on; |
| 72 | ti,regulator-ext-sleep-control = <4>; |
| 73 | }; |
| 74 | vddctrl_reg: vddctrl { |
| 75 | regulator-min-microvolt = < 600000>; |
| 76 | regulator-max-microvolt = <1400000>; |
| 77 | regulator-always-on; |
| 78 | regulator-boot-on; |
| 79 | ti,regulator-ext-sleep-control = <0>; |
| 80 | }; |
| 81 | vio_reg: vio { |
| 82 | regulator-min-microvolt = <1500000>; |
| 83 | regulator-max-microvolt = <1800000>; |
| 84 | regulator-always-on; |
| 85 | regulator-boot-on; |
| 86 | ti,regulator-ext-sleep-control = <1>; |
| 87 | }; |
| 88 | ldo1_reg: ldo1 { |
| 89 | regulator-min-microvolt = <1000000>; |
| 90 | regulator-max-microvolt = <3300000>; |
| 91 | ti,regulator-ext-sleep-control = <0>; |
| 92 | }; |
| 93 | ldo2_reg: ldo2 { |
| 94 | regulator-min-microvolt = <1050000>; |
| 95 | regulator-max-microvolt = <1050000>; |
| 96 | ti,regulator-ext-sleep-control = <0>; |
| 97 | }; |
| 98 | ldo3_reg: ldo3 { |
| 99 | regulator-min-microvolt = <1000000>; |
| 100 | regulator-max-microvolt = <3300000>; |
| 101 | ti,regulator-ext-sleep-control = <0>; |
| 102 | }; |
| 103 | ldo4_reg: ldo4 { |
| 104 | regulator-min-microvolt = <1000000>; |
| 105 | regulator-max-microvolt = <3300000>; |
| 106 | regulator-always-on; |
| 107 | ti,regulator-ext-sleep-control = <0>; |
| 108 | }; |
| 109 | ldo5_reg: ldo5 { |
| 110 | regulator-min-microvolt = <1000000>; |
| 111 | regulator-max-microvolt = <3300000>; |
| 112 | ti,regulator-ext-sleep-control = <0>; |
| 113 | }; |
| 114 | ldo6_reg: ldo6 { |
| 115 | regulator-min-microvolt = <1200000>; |
| 116 | regulator-max-microvolt = <1200000>; |
| 117 | ti,regulator-ext-sleep-control = <0>; |
| 118 | }; |
| 119 | ldo7_reg: ldo7 { |
| 120 | regulator-min-microvolt = <1200000>; |
| 121 | regulator-max-microvolt = <1200000>; |
| 122 | regulator-always-on; |
| 123 | regulator-boot-on; |
| 124 | ti,regulator-ext-sleep-control = <1>; |
| 125 | }; |
| 126 | ldo8_reg: ldo8 { |
| 127 | regulator-min-microvolt = <1000000>; |
| 128 | regulator-max-microvolt = <3300000>; |
| 129 | regulator-always-on; |
| 130 | ti,regulator-ext-sleep-control = <1>; |
| 131 | }; |
| 132 | }; |
| 133 | }; |