Jonghwa Lee | 133d401 | 2012-06-01 13:17:14 +0900 | [diff] [blame^] | 1 | /* |
| 2 | * max77686.c - Regulator driver for the Maxim 77686 |
| 3 | * |
| 4 | * Copyright (C) 2012 Samsung Electronics |
| 5 | * Chiwoong Byun <woong.byun@smasung.com> |
| 6 | * Jonghwa Lee <jonghwa3.lee@samsung.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License as published by |
| 10 | * the Free Software Foundation; either version 2 of the License, or |
| 11 | * (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 21 | * |
| 22 | * This driver is based on max8997.c |
| 23 | */ |
| 24 | |
| 25 | #include <linux/kernel.h> |
| 26 | #include <linux/bug.h> |
| 27 | #include <linux/delay.h> |
| 28 | #include <linux/err.h> |
| 29 | #include <linux/gpio.h> |
| 30 | #include <linux/slab.h> |
| 31 | #include <linux/platform_device.h> |
| 32 | #include <linux/regulator/driver.h> |
| 33 | #include <linux/regulator/machine.h> |
| 34 | #include <linux/mfd/max77686.h> |
| 35 | #include <linux/mfd/max77686-private.h> |
| 36 | |
| 37 | #define MAX77686_LDO_MINUV 800000 |
| 38 | #define MAX77686_LDO_UVSTEP 50000 |
| 39 | #define MAX77686_LDO_LOW_MINUV 800000 |
| 40 | #define MAX77686_LDO_LOW_UVSTEP 25000 |
| 41 | #define MAX77686_BUCK_MINUV 750000 |
| 42 | #define MAX77686_BUCK_UVSTEP 50000 |
| 43 | #define MAX77686_DVS_MINUV 600000 |
| 44 | #define MAX77686_DVS_UVSTEP 12500 |
| 45 | |
| 46 | #define MAX77686_OPMODE_SHIFT 6 |
| 47 | #define MAX77686_OPMODE_BUCK234_SHIFT 4 |
| 48 | #define MAX77686_OPMODE_MASK 0x3 |
| 49 | |
| 50 | #define MAX77686_VSEL_MASK 0x3F |
| 51 | #define MAX77686_DVS_VSEL_MASK 0xFF |
| 52 | |
| 53 | #define MAX77686_RAMP_RATE_MASK 0xC0 |
| 54 | |
| 55 | #define MAX77686_REGULATORS MAX77686_REG_MAX |
| 56 | #define MAX77686_LDOS 26 |
| 57 | |
| 58 | enum max77686_ramp_rate { |
| 59 | RAMP_RATE_13P75MV, |
| 60 | RAMP_RATE_27P5MV, |
| 61 | RAMP_RATE_55MV, |
| 62 | RAMP_RATE_NO_CTRL, /* 100mV/us */ |
| 63 | }; |
| 64 | |
| 65 | struct max77686_data { |
| 66 | struct device *dev; |
| 67 | struct max77686_dev *iodev; |
| 68 | int num_regulators; |
| 69 | struct regulator_dev **rdev; |
| 70 | int ramp_delay; /* in mV/us */ |
| 71 | }; |
| 72 | |
| 73 | static int max77686_set_dvs_voltage_time_sel(struct regulator_dev *rdev, |
| 74 | unsigned int old_selector, unsigned int new_selector) |
| 75 | { |
| 76 | struct max77686_data *max77686 = rdev_get_drvdata(rdev); |
| 77 | int ramp_rate[] = {13, 27, 55, 100}; |
| 78 | return (DIV_ROUND_UP(rdev->desc->uV_step |
| 79 | * abs(new_selector - old_selector), |
| 80 | ramp_rate[max77686->ramp_delay])); |
| 81 | } |
| 82 | |
| 83 | static int max77686_set_voltage_time_sel(struct regulator_dev *rdev, |
| 84 | unsigned int old_selector, unsigned int new_selector) |
| 85 | { |
| 86 | /* Unconditionally 100 mV/us */ |
| 87 | return (DIV_ROUND_UP(rdev->desc->uV_step |
| 88 | * abs(new_selector - old_selector), 100)); |
| 89 | } |
| 90 | |
| 91 | static struct regulator_ops max77686_ops = { |
| 92 | .list_voltage = regulator_list_voltage_linear, |
| 93 | .is_enabled = regulator_is_enabled_regmap, |
| 94 | .enable = regulator_enable_regmap, |
| 95 | .disable = regulator_disable_regmap, |
| 96 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 97 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 98 | .set_voltage_time_sel = max77686_set_voltage_time_sel, |
| 99 | }; |
| 100 | |
| 101 | static struct regulator_ops max77686_buck_dvs_ops = { |
| 102 | .list_voltage = regulator_list_voltage_linear, |
| 103 | .is_enabled = regulator_is_enabled_regmap, |
| 104 | .enable = regulator_enable_regmap, |
| 105 | .disable = regulator_disable_regmap, |
| 106 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 107 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 108 | .set_voltage_time_sel = max77686_set_dvs_voltage_time_sel, |
| 109 | }; |
| 110 | |
| 111 | #define regulator_desc_ldo(num) { \ |
| 112 | .name = "LDO"#num, \ |
| 113 | .id = MAX77686_LDO##num, \ |
| 114 | .ops = &max77686_ops, \ |
| 115 | .type = REGULATOR_VOLTAGE, \ |
| 116 | .owner = THIS_MODULE, \ |
| 117 | .min_uV = MAX77686_LDO_MINUV, \ |
| 118 | .uV_step = MAX77686_LDO_UVSTEP, \ |
| 119 | .n_voltages = MAX77686_VSEL_MASK + 1, \ |
| 120 | .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| 121 | .vsel_mask = MAX77686_VSEL_MASK, \ |
| 122 | .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| 123 | .enable_mask = MAX77686_OPMODE_MASK \ |
| 124 | << MAX77686_OPMODE_SHIFT, \ |
| 125 | } |
| 126 | #define regulator_desc_ldo_low(num) { \ |
| 127 | .name = "LDO"#num, \ |
| 128 | .id = MAX77686_LDO##num, \ |
| 129 | .ops = &max77686_ops, \ |
| 130 | .type = REGULATOR_VOLTAGE, \ |
| 131 | .owner = THIS_MODULE, \ |
| 132 | .min_uV = MAX77686_LDO_LOW_MINUV, \ |
| 133 | .uV_step = MAX77686_LDO_LOW_UVSTEP, \ |
| 134 | .n_voltages = MAX77686_VSEL_MASK + 1, \ |
| 135 | .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| 136 | .vsel_mask = MAX77686_VSEL_MASK, \ |
| 137 | .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| 138 | .enable_mask = MAX77686_OPMODE_MASK \ |
| 139 | << MAX77686_OPMODE_SHIFT, \ |
| 140 | } |
| 141 | #define regulator_desc_buck(num) { \ |
| 142 | .name = "BUCK"#num, \ |
| 143 | .id = MAX77686_BUCK##num, \ |
| 144 | .ops = &max77686_ops, \ |
| 145 | .type = REGULATOR_VOLTAGE, \ |
| 146 | .owner = THIS_MODULE, \ |
| 147 | .min_uV = MAX77686_BUCK_MINUV, \ |
| 148 | .uV_step = MAX77686_BUCK_UVSTEP, \ |
| 149 | .n_voltages = MAX77686_VSEL_MASK + 1, \ |
| 150 | .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \ |
| 151 | .vsel_mask = MAX77686_VSEL_MASK, \ |
| 152 | .enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \ |
| 153 | .enable_mask = MAX77686_OPMODE_MASK, \ |
| 154 | } |
| 155 | #define regulator_desc_buck1(num) { \ |
| 156 | .name = "BUCK"#num, \ |
| 157 | .id = MAX77686_BUCK##num, \ |
| 158 | .ops = &max77686_ops, \ |
| 159 | .type = REGULATOR_VOLTAGE, \ |
| 160 | .owner = THIS_MODULE, \ |
| 161 | .min_uV = MAX77686_BUCK_MINUV, \ |
| 162 | .uV_step = MAX77686_BUCK_UVSTEP, \ |
| 163 | .n_voltages = MAX77686_VSEL_MASK + 1, \ |
| 164 | .vsel_reg = MAX77686_REG_BUCK1OUT, \ |
| 165 | .vsel_mask = MAX77686_VSEL_MASK, \ |
| 166 | .enable_reg = MAX77686_REG_BUCK1CTRL, \ |
| 167 | .enable_mask = MAX77686_OPMODE_MASK, \ |
| 168 | } |
| 169 | #define regulator_desc_buck_dvs(num) { \ |
| 170 | .name = "BUCK"#num, \ |
| 171 | .id = MAX77686_BUCK##num, \ |
| 172 | .ops = &max77686_buck_dvs_ops, \ |
| 173 | .type = REGULATOR_VOLTAGE, \ |
| 174 | .owner = THIS_MODULE, \ |
| 175 | .min_uV = MAX77686_DVS_MINUV, \ |
| 176 | .uV_step = MAX77686_DVS_UVSTEP, \ |
| 177 | .n_voltages = MAX77686_DVS_VSEL_MASK + 1, \ |
| 178 | .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \ |
| 179 | .vsel_mask = MAX77686_DVS_VSEL_MASK, \ |
| 180 | .enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \ |
| 181 | .enable_mask = MAX77686_OPMODE_MASK \ |
| 182 | << MAX77686_OPMODE_BUCK234_SHIFT, \ |
| 183 | } |
| 184 | |
| 185 | static struct regulator_desc regulators[] = { |
| 186 | regulator_desc_ldo_low(1), |
| 187 | regulator_desc_ldo_low(2), |
| 188 | regulator_desc_ldo(3), |
| 189 | regulator_desc_ldo(4), |
| 190 | regulator_desc_ldo(5), |
| 191 | regulator_desc_ldo_low(6), |
| 192 | regulator_desc_ldo_low(7), |
| 193 | regulator_desc_ldo_low(8), |
| 194 | regulator_desc_ldo(9), |
| 195 | regulator_desc_ldo(10), |
| 196 | regulator_desc_ldo(11), |
| 197 | regulator_desc_ldo(12), |
| 198 | regulator_desc_ldo(13), |
| 199 | regulator_desc_ldo(14), |
| 200 | regulator_desc_ldo_low(15), |
| 201 | regulator_desc_ldo(16), |
| 202 | regulator_desc_ldo(17), |
| 203 | regulator_desc_ldo(18), |
| 204 | regulator_desc_ldo(19), |
| 205 | regulator_desc_ldo(20), |
| 206 | regulator_desc_ldo(21), |
| 207 | regulator_desc_ldo(22), |
| 208 | regulator_desc_ldo(23), |
| 209 | regulator_desc_ldo(24), |
| 210 | regulator_desc_ldo(25), |
| 211 | regulator_desc_ldo(26), |
| 212 | regulator_desc_buck1(1), |
| 213 | regulator_desc_buck_dvs(2), |
| 214 | regulator_desc_buck_dvs(3), |
| 215 | regulator_desc_buck_dvs(4), |
| 216 | regulator_desc_buck(5), |
| 217 | regulator_desc_buck(6), |
| 218 | regulator_desc_buck(7), |
| 219 | regulator_desc_buck(8), |
| 220 | regulator_desc_buck(9), |
| 221 | }; |
| 222 | |
| 223 | static __devinit int max77686_pmic_probe(struct platform_device *pdev) |
| 224 | { |
| 225 | struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| 226 | struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev); |
| 227 | struct regulator_dev **rdev; |
| 228 | struct max77686_data *max77686; |
| 229 | int i, size; |
| 230 | int ret = 0; |
| 231 | struct regulator_config config; |
| 232 | |
| 233 | dev_dbg(&pdev->dev, "%s\n", __func__); |
| 234 | |
| 235 | max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data), |
| 236 | GFP_KERNEL); |
| 237 | if (!max77686) |
| 238 | return -ENOMEM; |
| 239 | |
| 240 | size = sizeof(struct regulator_dev *) * MAX77686_REGULATORS; |
| 241 | max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); |
| 242 | if (!max77686->rdev) |
| 243 | return -ENOMEM; |
| 244 | |
| 245 | rdev = max77686->rdev; |
| 246 | max77686->dev = &pdev->dev; |
| 247 | max77686->iodev = iodev; |
| 248 | if (pdata) |
| 249 | max77686->num_regulators = pdata->num_regulators; |
| 250 | platform_set_drvdata(pdev, max77686); |
| 251 | |
| 252 | max77686->ramp_delay = RAMP_RATE_NO_CTRL; /* Set 0x3 for RAMP */ |
| 253 | regmap_update_bits(max77686->iodev->regmap, |
| 254 | MAX77686_REG_BUCK2CTRL1, MAX77686_RAMP_RATE_MASK, |
| 255 | max77686->ramp_delay << 6); |
| 256 | regmap_update_bits(max77686->iodev->regmap, |
| 257 | MAX77686_REG_BUCK3CTRL1, MAX77686_RAMP_RATE_MASK, |
| 258 | max77686->ramp_delay << 6); |
| 259 | regmap_update_bits(max77686->iodev->regmap, |
| 260 | MAX77686_REG_BUCK4CTRL1, MAX77686_RAMP_RATE_MASK, |
| 261 | max77686->ramp_delay << 6); |
| 262 | |
| 263 | if (pdata->num_regulators == MAX77686_REGULATORS) { |
| 264 | for (i = 0; i < MAX77686_REGULATORS; i++) { |
| 265 | config.dev = max77686->dev; |
| 266 | config.regmap = iodev->regmap; |
| 267 | config.driver_data = max77686; |
| 268 | config.init_data = pdata->regulators[i].initdata; |
| 269 | |
| 270 | rdev[i] = regulator_register(®ulators[i], &config); |
| 271 | |
| 272 | if (IS_ERR(rdev[i])) { |
| 273 | ret = PTR_ERR(rdev[i]); |
| 274 | dev_err(max77686->dev, |
| 275 | "regulator init failed for %d\n", i); |
| 276 | rdev[i] = NULL; |
| 277 | goto err; |
| 278 | } |
| 279 | } |
| 280 | } else { |
| 281 | dev_err(max77686->dev, |
| 282 | "Lack of initial data for regulator's initialiation\n"); |
| 283 | return -EINVAL; |
| 284 | } |
| 285 | return 0; |
| 286 | err: |
| 287 | for (i = 0; i < MAX77686_REGULATORS; i++) { |
| 288 | if (rdev[i]) |
| 289 | regulator_unregister(rdev[i]); |
| 290 | } |
| 291 | return ret; |
| 292 | } |
| 293 | |
| 294 | static int __devexit max77686_pmic_remove(struct platform_device *pdev) |
| 295 | { |
| 296 | struct max77686_data *max77686 = platform_get_drvdata(pdev); |
| 297 | struct regulator_dev **rdev = max77686->rdev; |
| 298 | int i; |
| 299 | |
| 300 | for (i = 0; i < MAX77686_REGULATORS; i++) |
| 301 | if (rdev[i]) |
| 302 | regulator_unregister(rdev[i]); |
| 303 | |
| 304 | return 0; |
| 305 | } |
| 306 | |
| 307 | static const struct platform_device_id max77686_pmic_id[] = { |
| 308 | {"max77686-pmic", 0}, |
| 309 | { }, |
| 310 | }; |
| 311 | MODULE_DEVICE_TABLE(platform, max77686_pmic_id); |
| 312 | |
| 313 | static struct platform_driver max77686_pmic_driver = { |
| 314 | .driver = { |
| 315 | .name = "max77686-pmic", |
| 316 | .owner = THIS_MODULE, |
| 317 | }, |
| 318 | .probe = max77686_pmic_probe, |
| 319 | .remove = __devexit_p(max77686_pmic_remove), |
| 320 | .id_table = max77686_pmic_id, |
| 321 | }; |
| 322 | |
| 323 | static int __init max77686_pmic_init(void) |
| 324 | { |
| 325 | return platform_driver_register(&max77686_pmic_driver); |
| 326 | } |
| 327 | subsys_initcall(max77686_pmic_init); |
| 328 | |
| 329 | static void __exit max77686_pmic_cleanup(void) |
| 330 | { |
| 331 | platform_driver_unregister(&max77686_pmic_driver); |
| 332 | } |
| 333 | module_exit(max77686_pmic_cleanup); |
| 334 | |
| 335 | MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver"); |
| 336 | MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>"); |
| 337 | MODULE_LICENSE("GPL"); |