Carlo Caione | dfe7a1b | 2014-04-11 11:38:10 +0200 | [diff] [blame] | 1 | /* |
| 2 | * AXP20x regulators driver. |
| 3 | * |
| 4 | * Copyright (C) 2013 Carlo Caione <carlo@caione.org> |
| 5 | * |
| 6 | * This file is subject to the terms and conditions of the GNU General |
| 7 | * Public License. See the file "COPYING" in the main directory of this |
| 8 | * archive for more details. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/err.h> |
| 17 | #include <linux/init.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/of.h> |
| 20 | #include <linux/of_device.h> |
| 21 | #include <linux/platform_device.h> |
| 22 | #include <linux/regmap.h> |
| 23 | #include <linux/mfd/axp20x.h> |
| 24 | #include <linux/regulator/driver.h> |
| 25 | #include <linux/regulator/of_regulator.h> |
| 26 | |
| 27 | #define AXP20X_IO_ENABLED 0x03 |
| 28 | #define AXP20X_IO_DISABLED 0x07 |
| 29 | |
| 30 | #define AXP20X_WORKMODE_DCDC2_MASK BIT(2) |
| 31 | #define AXP20X_WORKMODE_DCDC3_MASK BIT(1) |
| 32 | |
| 33 | #define AXP20X_FREQ_DCDC_MASK 0x0f |
| 34 | |
| 35 | #define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \ |
| 36 | _emask, _enable_val, _disable_val) \ |
| 37 | [AXP20X_##_id] = { \ |
| 38 | .name = #_id, \ |
| 39 | .supply_name = (_supply), \ |
| 40 | .type = REGULATOR_VOLTAGE, \ |
| 41 | .id = AXP20X_##_id, \ |
| 42 | .n_voltages = (((_max) - (_min)) / (_step) + 1), \ |
| 43 | .owner = THIS_MODULE, \ |
| 44 | .min_uV = (_min) * 1000, \ |
| 45 | .uV_step = (_step) * 1000, \ |
| 46 | .vsel_reg = (_vreg), \ |
| 47 | .vsel_mask = (_vmask), \ |
| 48 | .enable_reg = (_ereg), \ |
| 49 | .enable_mask = (_emask), \ |
| 50 | .enable_val = (_enable_val), \ |
| 51 | .disable_val = (_disable_val), \ |
| 52 | .ops = &axp20x_ops, \ |
| 53 | } |
| 54 | |
| 55 | #define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \ |
| 56 | _emask) \ |
| 57 | [AXP20X_##_id] = { \ |
| 58 | .name = #_id, \ |
| 59 | .supply_name = (_supply), \ |
| 60 | .type = REGULATOR_VOLTAGE, \ |
| 61 | .id = AXP20X_##_id, \ |
| 62 | .n_voltages = (((_max) - (_min)) / (_step) + 1), \ |
| 63 | .owner = THIS_MODULE, \ |
| 64 | .min_uV = (_min) * 1000, \ |
| 65 | .uV_step = (_step) * 1000, \ |
| 66 | .vsel_reg = (_vreg), \ |
| 67 | .vsel_mask = (_vmask), \ |
| 68 | .enable_reg = (_ereg), \ |
| 69 | .enable_mask = (_emask), \ |
| 70 | .ops = &axp20x_ops, \ |
| 71 | } |
| 72 | |
| 73 | #define AXP20X_DESC_FIXED(_id, _supply, _volt) \ |
| 74 | [AXP20X_##_id] = { \ |
| 75 | .name = #_id, \ |
| 76 | .supply_name = (_supply), \ |
| 77 | .type = REGULATOR_VOLTAGE, \ |
| 78 | .id = AXP20X_##_id, \ |
| 79 | .n_voltages = 1, \ |
| 80 | .owner = THIS_MODULE, \ |
| 81 | .min_uV = (_volt) * 1000, \ |
| 82 | .ops = &axp20x_ops_fixed \ |
| 83 | } |
| 84 | |
| 85 | #define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask) \ |
| 86 | [AXP20X_##_id] = { \ |
| 87 | .name = #_id, \ |
| 88 | .supply_name = (_supply), \ |
| 89 | .type = REGULATOR_VOLTAGE, \ |
| 90 | .id = AXP20X_##_id, \ |
| 91 | .n_voltages = ARRAY_SIZE(_table), \ |
| 92 | .owner = THIS_MODULE, \ |
| 93 | .vsel_reg = (_vreg), \ |
| 94 | .vsel_mask = (_vmask), \ |
| 95 | .enable_reg = (_ereg), \ |
| 96 | .enable_mask = (_emask), \ |
| 97 | .volt_table = (_table), \ |
| 98 | .ops = &axp20x_ops_table, \ |
| 99 | } |
| 100 | |
| 101 | static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000, |
| 102 | 1700000, 1800000, 1900000, 2000000, 2500000, |
| 103 | 2700000, 2800000, 3000000, 3100000, 3200000, |
| 104 | 3300000 }; |
| 105 | |
| 106 | static struct regulator_ops axp20x_ops_fixed = { |
| 107 | .list_voltage = regulator_list_voltage_linear, |
| 108 | }; |
| 109 | |
| 110 | static struct regulator_ops axp20x_ops_table = { |
| 111 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 112 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 113 | .list_voltage = regulator_list_voltage_table, |
Axel Lin | b887035 | 2014-04-15 19:58:42 +0800 | [diff] [blame] | 114 | .map_voltage = regulator_map_voltage_ascend, |
Carlo Caione | dfe7a1b | 2014-04-11 11:38:10 +0200 | [diff] [blame] | 115 | .enable = regulator_enable_regmap, |
| 116 | .disable = regulator_disable_regmap, |
| 117 | .is_enabled = regulator_is_enabled_regmap, |
| 118 | }; |
| 119 | |
| 120 | static struct regulator_ops axp20x_ops = { |
| 121 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 122 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 123 | .list_voltage = regulator_list_voltage_linear, |
| 124 | .enable = regulator_enable_regmap, |
| 125 | .disable = regulator_disable_regmap, |
| 126 | .is_enabled = regulator_is_enabled_regmap, |
| 127 | }; |
| 128 | |
| 129 | static const struct regulator_desc axp20x_regulators[] = { |
| 130 | AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f, |
| 131 | AXP20X_PWR_OUT_CTRL, 0x10), |
| 132 | AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f, |
| 133 | AXP20X_PWR_OUT_CTRL, 0x02), |
| 134 | AXP20X_DESC_FIXED(LDO1, "acin", 1300), |
| 135 | AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0, |
| 136 | AXP20X_PWR_OUT_CTRL, 0x04), |
| 137 | AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f, |
| 138 | AXP20X_PWR_OUT_CTRL, 0x40), |
| 139 | AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f, |
| 140 | AXP20X_PWR_OUT_CTRL, 0x08), |
| 141 | AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0, |
| 142 | AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED, |
| 143 | AXP20X_IO_DISABLED), |
| 144 | }; |
| 145 | |
| 146 | #define AXP_MATCH(_name, _id) \ |
| 147 | [AXP20X_##_id] = { \ |
| 148 | .name = #_name, \ |
| 149 | .driver_data = (void *) &axp20x_regulators[AXP20X_##_id], \ |
| 150 | } |
| 151 | |
| 152 | static struct of_regulator_match axp20x_matches[] = { |
| 153 | AXP_MATCH(dcdc2, DCDC2), |
| 154 | AXP_MATCH(dcdc3, DCDC3), |
| 155 | AXP_MATCH(ldo1, LDO1), |
| 156 | AXP_MATCH(ldo2, LDO2), |
| 157 | AXP_MATCH(ldo3, LDO3), |
| 158 | AXP_MATCH(ldo4, LDO4), |
| 159 | AXP_MATCH(ldo5, LDO5), |
| 160 | }; |
| 161 | |
| 162 | static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) |
| 163 | { |
| 164 | struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); |
| 165 | |
| 166 | if (dcdcfreq < 750) { |
| 167 | dcdcfreq = 750; |
| 168 | dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n"); |
| 169 | } |
| 170 | |
| 171 | if (dcdcfreq > 1875) { |
| 172 | dcdcfreq = 1875; |
| 173 | dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n"); |
| 174 | } |
| 175 | |
| 176 | dcdcfreq = (dcdcfreq - 750) / 75; |
| 177 | |
| 178 | return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ, |
| 179 | AXP20X_FREQ_DCDC_MASK, dcdcfreq); |
| 180 | } |
| 181 | |
| 182 | static int axp20x_regulator_parse_dt(struct platform_device *pdev) |
| 183 | { |
| 184 | struct device_node *np, *regulators; |
| 185 | int ret; |
| 186 | u32 dcdcfreq; |
| 187 | |
| 188 | np = of_node_get(pdev->dev.parent->of_node); |
| 189 | if (!np) |
| 190 | return 0; |
| 191 | |
Boris BREZILLON | a6016c5 | 2014-05-19 10:25:30 +0200 | [diff] [blame] | 192 | regulators = of_get_child_by_name(np, "regulators"); |
Carlo Caione | dfe7a1b | 2014-04-11 11:38:10 +0200 | [diff] [blame] | 193 | if (!regulators) { |
| 194 | dev_warn(&pdev->dev, "regulators node not found\n"); |
| 195 | } else { |
| 196 | ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches, |
| 197 | ARRAY_SIZE(axp20x_matches)); |
| 198 | if (ret < 0) { |
| 199 | dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); |
| 200 | return ret; |
| 201 | } |
| 202 | |
| 203 | dcdcfreq = 1500; |
| 204 | of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq); |
| 205 | ret = axp20x_set_dcdc_freq(pdev, dcdcfreq); |
| 206 | if (ret < 0) { |
| 207 | dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret); |
| 208 | return ret; |
| 209 | } |
| 210 | |
| 211 | of_node_put(regulators); |
| 212 | } |
| 213 | |
| 214 | return 0; |
| 215 | } |
| 216 | |
| 217 | static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode) |
| 218 | { |
| 219 | unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK; |
| 220 | |
| 221 | if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) |
| 222 | return -EINVAL; |
| 223 | |
| 224 | if (id == AXP20X_DCDC3) |
| 225 | mask = AXP20X_WORKMODE_DCDC3_MASK; |
| 226 | |
| 227 | workmode <<= ffs(mask) - 1; |
| 228 | |
| 229 | return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode); |
| 230 | } |
| 231 | |
| 232 | static int axp20x_regulator_probe(struct platform_device *pdev) |
| 233 | { |
| 234 | struct regulator_dev *rdev; |
| 235 | struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); |
| 236 | struct regulator_config config = { }; |
| 237 | struct regulator_init_data *init_data; |
| 238 | int ret, i; |
| 239 | u32 workmode; |
| 240 | |
| 241 | ret = axp20x_regulator_parse_dt(pdev); |
| 242 | if (ret) |
| 243 | return ret; |
| 244 | |
| 245 | for (i = 0; i < AXP20X_REG_ID_MAX; i++) { |
| 246 | init_data = axp20x_matches[i].init_data; |
| 247 | |
| 248 | config.dev = &pdev->dev; |
| 249 | config.init_data = init_data; |
| 250 | config.regmap = axp20x->regmap; |
| 251 | config.of_node = axp20x_matches[i].of_node; |
| 252 | |
| 253 | rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i], |
| 254 | &config); |
| 255 | if (IS_ERR(rdev)) { |
| 256 | dev_err(&pdev->dev, "Failed to register %s\n", |
| 257 | axp20x_regulators[i].name); |
| 258 | |
| 259 | return PTR_ERR(rdev); |
| 260 | } |
| 261 | |
| 262 | ret = of_property_read_u32(axp20x_matches[i].of_node, "x-powers,dcdc-workmode", |
| 263 | &workmode); |
| 264 | if (!ret) { |
| 265 | if (axp20x_set_dcdc_workmode(rdev, i, workmode)) |
| 266 | dev_err(&pdev->dev, "Failed to set workmode on %s\n", |
| 267 | axp20x_regulators[i].name); |
| 268 | } |
| 269 | } |
| 270 | |
| 271 | return 0; |
| 272 | } |
| 273 | |
| 274 | static struct platform_driver axp20x_regulator_driver = { |
| 275 | .probe = axp20x_regulator_probe, |
| 276 | .driver = { |
| 277 | .name = "axp20x-regulator", |
| 278 | .owner = THIS_MODULE, |
| 279 | }, |
| 280 | }; |
| 281 | |
| 282 | module_platform_driver(axp20x_regulator_driver); |
| 283 | |
| 284 | MODULE_LICENSE("GPL v2"); |
| 285 | MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); |
| 286 | MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC"); |