Laxman Dewangan | 1a0bb67 | 2012-11-11 20:42:01 +0530 | [diff] [blame^] | 1 | /* |
| 2 | * tps80031-regulator.c -- TI TPS80031 regulator driver. |
| 3 | * |
| 4 | * Regulator driver for TITPS80031/TPS80032 Fully Integrated Power |
| 5 | * Management with Power Path and Battery Charger. |
| 6 | * |
| 7 | * Copyright (c) 2012, NVIDIA Corporation. |
| 8 | * |
| 9 | * Author: Laxman Dewangan <ldewangan@nvidia.com> |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or |
| 12 | * modify it under the terms of the GNU General Public License as |
| 13 | * published by the Free Software Foundation version 2. |
| 14 | * |
| 15 | * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, |
| 16 | * whether express or implied; without even the implied warranty of |
| 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 18 | * General Public License for more details. |
| 19 | * |
| 20 | * You should have received a copy of the GNU General Public License |
| 21 | * along with this program; if not, write to the Free Software |
| 22 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA |
| 23 | * 02111-1307, USA |
| 24 | */ |
| 25 | |
| 26 | #include <linux/delay.h> |
| 27 | #include <linux/err.h> |
| 28 | #include <linux/init.h> |
| 29 | #include <linux/kernel.h> |
| 30 | #include <linux/mfd/tps80031.h> |
| 31 | #include <linux/module.h> |
| 32 | #include <linux/platform_device.h> |
| 33 | #include <linux/regulator/driver.h> |
| 34 | #include <linux/regulator/machine.h> |
| 35 | #include <linux/slab.h> |
| 36 | |
| 37 | /* Flags for DCDC Voltage reading */ |
| 38 | #define DCDC_OFFSET_EN BIT(0) |
| 39 | #define DCDC_EXTENDED_EN BIT(1) |
| 40 | #define TRACK_MODE_ENABLE BIT(2) |
| 41 | |
| 42 | #define SMPS_MULTOFFSET_VIO BIT(1) |
| 43 | #define SMPS_MULTOFFSET_SMPS1 BIT(3) |
| 44 | #define SMPS_MULTOFFSET_SMPS2 BIT(4) |
| 45 | #define SMPS_MULTOFFSET_SMPS3 BIT(6) |
| 46 | #define SMPS_MULTOFFSET_SMPS4 BIT(0) |
| 47 | |
| 48 | #define SMPS_CMD_MASK 0xC0 |
| 49 | #define SMPS_VSEL_MASK 0x3F |
| 50 | #define LDO_VSEL_MASK 0x1F |
| 51 | #define LDO_TRACK_VSEL_MASK 0x3F |
| 52 | |
| 53 | #define MISC2_LDOUSB_IN_VSYS BIT(4) |
| 54 | #define MISC2_LDOUSB_IN_PMID BIT(3) |
| 55 | #define MISC2_LDOUSB_IN_MASK 0x18 |
| 56 | |
| 57 | #define MISC2_LDO3_SEL_VIB_VAL BIT(0) |
| 58 | #define MISC2_LDO3_SEL_VIB_MASK 0x1 |
| 59 | |
| 60 | #define BOOST_HW_PWR_EN BIT(5) |
| 61 | #define BOOST_HW_PWR_EN_MASK BIT(5) |
| 62 | |
| 63 | #define OPA_MODE_EN BIT(6) |
| 64 | #define OPA_MODE_EN_MASK BIT(6) |
| 65 | |
| 66 | #define USB_VBUS_CTRL_SET 0x04 |
| 67 | #define USB_VBUS_CTRL_CLR 0x05 |
| 68 | #define VBUS_DISCHRG 0x20 |
| 69 | |
| 70 | struct tps80031_regulator_info { |
| 71 | /* Regulator register address.*/ |
| 72 | u8 trans_reg; |
| 73 | u8 state_reg; |
| 74 | u8 force_reg; |
| 75 | u8 volt_reg; |
| 76 | u8 volt_id; |
| 77 | |
| 78 | /*Power request bits */ |
| 79 | int preq_bit; |
| 80 | |
| 81 | /* used by regulator core */ |
| 82 | struct regulator_desc desc; |
| 83 | |
| 84 | }; |
| 85 | |
| 86 | struct tps80031_regulator { |
| 87 | struct device *dev; |
| 88 | struct regulator_dev *rdev; |
| 89 | struct tps80031_regulator_info *rinfo; |
| 90 | |
| 91 | u8 device_flags; |
| 92 | unsigned int config_flags; |
| 93 | unsigned int ext_ctrl_flag; |
| 94 | }; |
| 95 | |
| 96 | static inline struct device *to_tps80031_dev(struct regulator_dev *rdev) |
| 97 | { |
| 98 | return rdev_get_dev(rdev)->parent->parent; |
| 99 | } |
| 100 | |
| 101 | static int tps80031_reg_is_enabled(struct regulator_dev *rdev) |
| 102 | { |
| 103 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 104 | struct device *parent = to_tps80031_dev(rdev); |
| 105 | u8 reg_val; |
| 106 | int ret; |
| 107 | |
| 108 | if (ri->ext_ctrl_flag & EXT_PWR_REQ) |
| 109 | return true; |
| 110 | |
| 111 | ret = tps80031_read(parent, SLAVE_ID1, ri->rinfo->state_reg, ®_val); |
| 112 | if (ret < 0) { |
| 113 | dev_err(&rdev->dev, "Reg 0x%02x read failed, err = %d\n", |
| 114 | ri->rinfo->state_reg, ret); |
| 115 | return ret; |
| 116 | } |
| 117 | return ((reg_val & STATE_MASK) == STATE_ON); |
| 118 | } |
| 119 | |
| 120 | static int tps80031_reg_enable(struct regulator_dev *rdev) |
| 121 | { |
| 122 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 123 | struct device *parent = to_tps80031_dev(rdev); |
| 124 | int ret; |
| 125 | |
| 126 | if (ri->ext_ctrl_flag & EXT_PWR_REQ) |
| 127 | return 0; |
| 128 | |
| 129 | ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->state_reg, |
| 130 | STATE_ON, STATE_MASK); |
| 131 | if (ret < 0) { |
| 132 | dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n", |
| 133 | ri->rinfo->state_reg, ret); |
| 134 | return ret; |
| 135 | } |
| 136 | return ret; |
| 137 | } |
| 138 | |
| 139 | static int tps80031_reg_disable(struct regulator_dev *rdev) |
| 140 | { |
| 141 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 142 | struct device *parent = to_tps80031_dev(rdev); |
| 143 | int ret; |
| 144 | |
| 145 | if (ri->ext_ctrl_flag & EXT_PWR_REQ) |
| 146 | return 0; |
| 147 | |
| 148 | ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->state_reg, |
| 149 | STATE_OFF, STATE_MASK); |
| 150 | if (ret < 0) |
| 151 | dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n", |
| 152 | ri->rinfo->state_reg, ret); |
| 153 | return ret; |
| 154 | } |
| 155 | |
| 156 | /* DCDC voltages for the selector of 58 to 63 */ |
| 157 | static int tps80031_dcdc_voltages[4][5] = { |
| 158 | { 1350, 1500, 1800, 1900, 2100}, |
| 159 | { 1350, 1500, 1800, 1900, 2100}, |
| 160 | { 2084, 2315, 2778, 2932, 3241}, |
| 161 | { 4167, 2315, 2778, 2932, 3241}, |
| 162 | }; |
| 163 | |
| 164 | static int tps80031_dcdc_list_voltage(struct regulator_dev *rdev, unsigned sel) |
| 165 | { |
| 166 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 167 | int volt_index = ri->device_flags & 0x3; |
| 168 | |
| 169 | if (sel == 0) |
| 170 | return 0; |
| 171 | else if (sel < 58) |
| 172 | return regulator_list_voltage_linear(rdev, sel - 1); |
| 173 | else |
| 174 | return tps80031_dcdc_voltages[volt_index][sel - 58] * 1000; |
| 175 | } |
| 176 | |
| 177 | static int tps80031_dcdc_set_voltage_sel(struct regulator_dev *rdev, |
| 178 | unsigned vsel) |
| 179 | { |
| 180 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 181 | struct device *parent = to_tps80031_dev(rdev); |
| 182 | int ret; |
| 183 | u8 reg_val; |
| 184 | |
| 185 | if (ri->rinfo->force_reg) { |
| 186 | ret = tps80031_read(parent, ri->rinfo->volt_id, |
| 187 | ri->rinfo->force_reg, ®_val); |
| 188 | if (ret < 0) { |
| 189 | dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", |
| 190 | ri->rinfo->force_reg, ret); |
| 191 | return ret; |
| 192 | } |
| 193 | if (!(reg_val & SMPS_CMD_MASK)) { |
| 194 | ret = tps80031_update(parent, ri->rinfo->volt_id, |
| 195 | ri->rinfo->force_reg, vsel, SMPS_VSEL_MASK); |
| 196 | if (ret < 0) |
| 197 | dev_err(ri->dev, |
| 198 | "reg 0x%02x update failed, e = %d\n", |
| 199 | ri->rinfo->force_reg, ret); |
| 200 | return ret; |
| 201 | } |
| 202 | } |
| 203 | ret = tps80031_update(parent, ri->rinfo->volt_id, |
| 204 | ri->rinfo->volt_reg, vsel, SMPS_VSEL_MASK); |
| 205 | if (ret < 0) |
| 206 | dev_err(ri->dev, "reg 0x%02x update failed, e = %d\n", |
| 207 | ri->rinfo->volt_reg, ret); |
| 208 | return ret; |
| 209 | } |
| 210 | |
| 211 | static int tps80031_dcdc_get_voltage_sel(struct regulator_dev *rdev) |
| 212 | { |
| 213 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 214 | struct device *parent = to_tps80031_dev(rdev); |
| 215 | uint8_t vsel = 0; |
| 216 | int ret; |
| 217 | |
| 218 | if (ri->rinfo->force_reg) { |
| 219 | ret = tps80031_read(parent, ri->rinfo->volt_id, |
| 220 | ri->rinfo->force_reg, &vsel); |
| 221 | if (ret < 0) { |
| 222 | dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", |
| 223 | ri->rinfo->force_reg, ret); |
| 224 | return ret; |
| 225 | } |
| 226 | |
| 227 | if (!(vsel & SMPS_CMD_MASK)) |
| 228 | return vsel & SMPS_VSEL_MASK; |
| 229 | } |
| 230 | ret = tps80031_read(parent, ri->rinfo->volt_id, |
| 231 | ri->rinfo->volt_reg, &vsel); |
| 232 | if (ret < 0) { |
| 233 | dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", |
| 234 | ri->rinfo->volt_reg, ret); |
| 235 | return ret; |
| 236 | } |
| 237 | return vsel & SMPS_VSEL_MASK; |
| 238 | } |
| 239 | |
| 240 | static int tps80031_ldo_set_voltage_sel(struct regulator_dev *rdev, |
| 241 | unsigned sel) |
| 242 | { |
| 243 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 244 | struct device *parent = to_tps80031_dev(rdev); |
| 245 | int ret; |
| 246 | |
| 247 | /* Check for valid setting for TPS80031 or TPS80032-ES1.0 */ |
| 248 | if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) && |
| 249 | (ri->device_flags & TRACK_MODE_ENABLE)) { |
| 250 | unsigned nvsel = (sel) & 0x1F; |
| 251 | if (((tps80031_get_chip_info(parent) == TPS80031) || |
| 252 | ((tps80031_get_chip_info(parent) == TPS80032) && |
| 253 | (tps80031_get_pmu_version(parent) == 0x0))) && |
| 254 | ((nvsel == 0x0) || (nvsel >= 0x19 && nvsel <= 0x1F))) { |
| 255 | dev_err(ri->dev, |
| 256 | "Invalid sel %d in track mode LDO2\n", |
| 257 | nvsel); |
| 258 | return -EINVAL; |
| 259 | } |
| 260 | } |
| 261 | |
| 262 | ret = tps80031_write(parent, ri->rinfo->volt_id, |
| 263 | ri->rinfo->volt_reg, sel); |
| 264 | if (ret < 0) |
| 265 | dev_err(ri->dev, "Error in writing reg 0x%02x, e = %d\n", |
| 266 | ri->rinfo->volt_reg, ret); |
| 267 | return ret; |
| 268 | } |
| 269 | |
| 270 | static int tps80031_ldo_get_voltage_sel(struct regulator_dev *rdev) |
| 271 | { |
| 272 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 273 | struct device *parent = to_tps80031_dev(rdev); |
| 274 | uint8_t vsel; |
| 275 | int ret; |
| 276 | |
| 277 | ret = tps80031_read(parent, ri->rinfo->volt_id, |
| 278 | ri->rinfo->volt_reg, &vsel); |
| 279 | if (ret < 0) { |
| 280 | dev_err(ri->dev, "Error in writing the Voltage register\n"); |
| 281 | return ret; |
| 282 | } |
| 283 | return vsel & rdev->desc->vsel_mask; |
| 284 | } |
| 285 | |
| 286 | static int tps80031_ldo_list_voltage(struct regulator_dev *rdev, unsigned sel) |
| 287 | { |
| 288 | if (sel == 0) |
| 289 | return 0; |
| 290 | else |
| 291 | return regulator_list_voltage_linear(rdev, sel - 1); |
| 292 | } |
| 293 | |
| 294 | static int tps80031_vbus_is_enabled(struct regulator_dev *rdev) |
| 295 | { |
| 296 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 297 | struct device *parent = to_tps80031_dev(rdev); |
| 298 | int ret = -EIO; |
| 299 | uint8_t ctrl1 = 0; |
| 300 | uint8_t ctrl3 = 0; |
| 301 | |
| 302 | ret = tps80031_read(parent, SLAVE_ID2, |
| 303 | TPS80031_CHARGERUSB_CTRL1, &ctrl1); |
| 304 | if (ret < 0) { |
| 305 | dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", |
| 306 | TPS80031_CHARGERUSB_CTRL1, ret); |
| 307 | return ret; |
| 308 | } |
| 309 | ret = tps80031_read(parent, SLAVE_ID2, |
| 310 | TPS80031_CHARGERUSB_CTRL3, &ctrl3); |
| 311 | if (ret < 0) { |
| 312 | dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", |
| 313 | TPS80031_CHARGERUSB_CTRL1, ret); |
| 314 | return ret; |
| 315 | } |
| 316 | if ((ctrl1 & OPA_MODE_EN) && (ctrl3 & BOOST_HW_PWR_EN)) |
| 317 | return 1; |
| 318 | return ret; |
| 319 | } |
| 320 | |
| 321 | static int tps80031_vbus_enable(struct regulator_dev *rdev) |
| 322 | { |
| 323 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 324 | struct device *parent = to_tps80031_dev(rdev); |
| 325 | int ret; |
| 326 | |
| 327 | ret = tps80031_set_bits(parent, SLAVE_ID2, |
| 328 | TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN); |
| 329 | if (ret < 0) { |
| 330 | dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", |
| 331 | TPS80031_CHARGERUSB_CTRL1, ret); |
| 332 | return ret; |
| 333 | } |
| 334 | |
| 335 | ret = tps80031_set_bits(parent, SLAVE_ID2, |
| 336 | TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN); |
| 337 | if (ret < 0) { |
| 338 | dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", |
| 339 | TPS80031_CHARGERUSB_CTRL3, ret); |
| 340 | return ret; |
| 341 | } |
| 342 | return ret; |
| 343 | } |
| 344 | |
| 345 | static int tps80031_vbus_disable(struct regulator_dev *rdev) |
| 346 | { |
| 347 | struct tps80031_regulator *ri = rdev_get_drvdata(rdev); |
| 348 | struct device *parent = to_tps80031_dev(rdev); |
| 349 | int ret = 0; |
| 350 | |
| 351 | if (ri->config_flags & VBUS_DISCHRG_EN_PDN) { |
| 352 | ret = tps80031_write(parent, SLAVE_ID2, |
| 353 | USB_VBUS_CTRL_SET, VBUS_DISCHRG); |
| 354 | if (ret < 0) { |
| 355 | dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n", |
| 356 | USB_VBUS_CTRL_SET, ret); |
| 357 | return ret; |
| 358 | } |
| 359 | } |
| 360 | |
| 361 | ret = tps80031_clr_bits(parent, SLAVE_ID2, |
| 362 | TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN); |
| 363 | if (ret < 0) { |
| 364 | dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n", |
| 365 | TPS80031_CHARGERUSB_CTRL1, ret); |
| 366 | return ret; |
| 367 | } |
| 368 | |
| 369 | ret = tps80031_clr_bits(parent, SLAVE_ID2, |
| 370 | TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN); |
| 371 | if (ret < 0) { |
| 372 | dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n", |
| 373 | TPS80031_CHARGERUSB_CTRL3, ret); |
| 374 | return ret; |
| 375 | } |
| 376 | |
| 377 | mdelay(DIV_ROUND_UP(ri->rinfo->desc.enable_time, 1000)); |
| 378 | if (ri->config_flags & VBUS_DISCHRG_EN_PDN) { |
| 379 | ret = tps80031_write(parent, SLAVE_ID2, |
| 380 | USB_VBUS_CTRL_CLR, VBUS_DISCHRG); |
| 381 | if (ret < 0) { |
| 382 | dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n", |
| 383 | USB_VBUS_CTRL_CLR, ret); |
| 384 | return ret; |
| 385 | } |
| 386 | } |
| 387 | return ret; |
| 388 | } |
| 389 | |
| 390 | static struct regulator_ops tps80031_dcdc_ops = { |
| 391 | .list_voltage = tps80031_dcdc_list_voltage, |
| 392 | .set_voltage_sel = tps80031_dcdc_set_voltage_sel, |
| 393 | .get_voltage_sel = tps80031_dcdc_get_voltage_sel, |
| 394 | .enable = tps80031_reg_enable, |
| 395 | .disable = tps80031_reg_disable, |
| 396 | .is_enabled = tps80031_reg_is_enabled, |
| 397 | }; |
| 398 | |
| 399 | static struct regulator_ops tps80031_ldo_ops = { |
| 400 | .list_voltage = tps80031_ldo_list_voltage, |
| 401 | .set_voltage_sel = tps80031_ldo_set_voltage_sel, |
| 402 | .get_voltage_sel = tps80031_ldo_get_voltage_sel, |
| 403 | .enable = tps80031_reg_enable, |
| 404 | .disable = tps80031_reg_disable, |
| 405 | .is_enabled = tps80031_reg_is_enabled, |
| 406 | }; |
| 407 | |
| 408 | static struct regulator_ops tps80031_vbus_sw_ops = { |
| 409 | .enable = tps80031_vbus_enable, |
| 410 | .disable = tps80031_vbus_disable, |
| 411 | .is_enabled = tps80031_vbus_is_enabled, |
| 412 | }; |
| 413 | |
| 414 | static struct regulator_ops tps80031_vbus_hw_ops = { |
| 415 | }; |
| 416 | |
| 417 | static struct regulator_ops tps80031_ext_reg_ops = { |
| 418 | .enable = tps80031_reg_enable, |
| 419 | .disable = tps80031_reg_disable, |
| 420 | .is_enabled = tps80031_reg_is_enabled, |
| 421 | }; |
| 422 | |
| 423 | /* Non-exiting default definition for some register */ |
| 424 | #define TPS80031_SMPS3_CFG_FORCE 0 |
| 425 | #define TPS80031_SMPS4_CFG_FORCE 0 |
| 426 | |
| 427 | #define TPS80031_VBUS_CFG_TRANS 0 |
| 428 | #define TPS80031_VBUS_CFG_STATE 0 |
| 429 | |
| 430 | #define TPS80031_REG_SMPS(_id, _volt_id, _pbit) \ |
| 431 | { \ |
| 432 | .trans_reg = TPS80031_##_id##_CFG_TRANS, \ |
| 433 | .state_reg = TPS80031_##_id##_CFG_STATE, \ |
| 434 | .force_reg = TPS80031_##_id##_CFG_FORCE, \ |
| 435 | .volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \ |
| 436 | .volt_id = SLAVE_##_volt_id, \ |
| 437 | .preq_bit = _pbit, \ |
| 438 | .desc = { \ |
| 439 | .name = "tps80031_"#_id, \ |
| 440 | .id = TPS80031_REGULATOR_##_id, \ |
| 441 | .n_voltages = 63, \ |
| 442 | .ops = &tps80031_dcdc_ops, \ |
| 443 | .type = REGULATOR_VOLTAGE, \ |
| 444 | .owner = THIS_MODULE, \ |
| 445 | .enable_time = 500, \ |
| 446 | }, \ |
| 447 | } |
| 448 | |
| 449 | #define TPS80031_REG_LDO(_id, _preq_bit) \ |
| 450 | { \ |
| 451 | .trans_reg = TPS80031_##_id##_CFG_TRANS, \ |
| 452 | .state_reg = TPS80031_##_id##_CFG_STATE, \ |
| 453 | .volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \ |
| 454 | .volt_id = SLAVE_ID1, \ |
| 455 | .preq_bit = _preq_bit, \ |
| 456 | .desc = { \ |
| 457 | .owner = THIS_MODULE, \ |
| 458 | .name = "tps80031_"#_id, \ |
| 459 | .id = TPS80031_REGULATOR_##_id, \ |
| 460 | .ops = &tps80031_ldo_ops, \ |
| 461 | .type = REGULATOR_VOLTAGE, \ |
| 462 | .min_uV = 1000000, \ |
| 463 | .uV_step = 100000, \ |
| 464 | .n_voltages = 25, \ |
| 465 | .vsel_mask = LDO_VSEL_MASK, \ |
| 466 | .enable_time = 500, \ |
| 467 | }, \ |
| 468 | } |
| 469 | |
| 470 | #define TPS80031_REG_FIXED(_id, max_mV, _ops, _delay, _pbit) \ |
| 471 | { \ |
| 472 | .trans_reg = TPS80031_##_id##_CFG_TRANS, \ |
| 473 | .state_reg = TPS80031_##_id##_CFG_STATE, \ |
| 474 | .volt_id = SLAVE_ID1, \ |
| 475 | .preq_bit = _pbit, \ |
| 476 | .desc = { \ |
| 477 | .name = "tps80031_"#_id, \ |
| 478 | .id = TPS80031_REGULATOR_##_id, \ |
| 479 | .n_voltages = 2, \ |
| 480 | .ops = &_ops, \ |
| 481 | .type = REGULATOR_VOLTAGE, \ |
| 482 | .owner = THIS_MODULE, \ |
| 483 | .enable_time = _delay, \ |
| 484 | }, \ |
| 485 | } |
| 486 | |
| 487 | static struct tps80031_regulator_info tps80031_rinfo[TPS80031_REGULATOR_MAX] = { |
| 488 | TPS80031_REG_SMPS(VIO, ID0, 4), |
| 489 | TPS80031_REG_SMPS(SMPS1, ID0, 0), |
| 490 | TPS80031_REG_SMPS(SMPS2, ID0, 1), |
| 491 | TPS80031_REG_SMPS(SMPS3, ID1, 2), |
| 492 | TPS80031_REG_SMPS(SMPS4, ID1, 3), |
| 493 | TPS80031_REG_LDO(VANA, -1), |
| 494 | TPS80031_REG_LDO(LDO1, 8), |
| 495 | TPS80031_REG_LDO(LDO2, 9), |
| 496 | TPS80031_REG_LDO(LDO3, 10), |
| 497 | TPS80031_REG_LDO(LDO4, 11), |
| 498 | TPS80031_REG_LDO(LDO5, 12), |
| 499 | TPS80031_REG_LDO(LDO6, 13), |
| 500 | TPS80031_REG_LDO(LDO7, 14), |
| 501 | TPS80031_REG_LDO(LDOLN, 15), |
| 502 | TPS80031_REG_LDO(LDOUSB, 5), |
| 503 | TPS80031_REG_FIXED(VBUS, 5000, tps80031_vbus_hw_ops, 100000, -1), |
| 504 | TPS80031_REG_FIXED(REGEN1, 3300, tps80031_ext_reg_ops, 0, 16), |
| 505 | TPS80031_REG_FIXED(REGEN2, 3300, tps80031_ext_reg_ops, 0, 17), |
| 506 | TPS80031_REG_FIXED(SYSEN, 3300, tps80031_ext_reg_ops, 0, 18), |
| 507 | }; |
| 508 | |
| 509 | static int tps80031_power_req_config(struct device *parent, |
| 510 | struct tps80031_regulator *ri, |
| 511 | struct tps80031_regulator_platform_data *tps80031_pdata) |
| 512 | { |
| 513 | int ret = 0; |
| 514 | |
| 515 | if (ri->rinfo->preq_bit < 0) |
| 516 | goto skip_pwr_req_config; |
| 517 | |
| 518 | ret = tps80031_ext_power_req_config(parent, ri->ext_ctrl_flag, |
| 519 | ri->rinfo->preq_bit, ri->rinfo->state_reg, |
| 520 | ri->rinfo->trans_reg); |
| 521 | if (ret < 0) { |
| 522 | dev_err(ri->dev, "ext powerreq config failed, err = %d\n", ret); |
| 523 | return ret; |
| 524 | } |
| 525 | |
| 526 | skip_pwr_req_config: |
| 527 | if (tps80031_pdata->ext_ctrl_flag & PWR_ON_ON_SLEEP) { |
| 528 | ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->trans_reg, |
| 529 | TRANS_SLEEP_ON, TRANS_SLEEP_MASK); |
| 530 | if (ret < 0) { |
| 531 | dev_err(ri->dev, "Reg 0x%02x update failed, e %d\n", |
| 532 | ri->rinfo->trans_reg, ret); |
| 533 | return ret; |
| 534 | } |
| 535 | } |
| 536 | return ret; |
| 537 | } |
| 538 | |
| 539 | static int tps80031_regulator_config(struct device *parent, |
| 540 | struct tps80031_regulator *ri, |
| 541 | struct tps80031_regulator_platform_data *tps80031_pdata) |
| 542 | { |
| 543 | int ret = 0; |
| 544 | |
| 545 | switch (ri->rinfo->desc.id) { |
| 546 | case TPS80031_REGULATOR_LDOUSB: |
| 547 | if (ri->config_flags & |
| 548 | (USBLDO_INPUT_VSYS | USBLDO_INPUT_PMID)) { |
| 549 | unsigned val = 0; |
| 550 | if (ri->config_flags & USBLDO_INPUT_VSYS) |
| 551 | val = MISC2_LDOUSB_IN_VSYS; |
| 552 | else |
| 553 | val = MISC2_LDOUSB_IN_PMID; |
| 554 | |
| 555 | ret = tps80031_update(parent, SLAVE_ID1, |
| 556 | TPS80031_MISC2, val, MISC2_LDOUSB_IN_MASK); |
| 557 | if (ret < 0) { |
| 558 | dev_err(ri->dev, |
| 559 | "LDOUSB config failed, e= %d\n", ret); |
| 560 | return ret; |
| 561 | } |
| 562 | } |
| 563 | break; |
| 564 | |
| 565 | case TPS80031_REGULATOR_LDO3: |
| 566 | if (ri->config_flags & LDO3_OUTPUT_VIB) { |
| 567 | ret = tps80031_update(parent, SLAVE_ID1, |
| 568 | TPS80031_MISC2, MISC2_LDO3_SEL_VIB_VAL, |
| 569 | MISC2_LDO3_SEL_VIB_MASK); |
| 570 | if (ret < 0) { |
| 571 | dev_err(ri->dev, |
| 572 | "LDO3 config failed, e = %d\n", ret); |
| 573 | return ret; |
| 574 | } |
| 575 | } |
| 576 | break; |
| 577 | |
| 578 | case TPS80031_REGULATOR_VBUS: |
| 579 | /* Provide SW control Ops if VBUS is SW control */ |
| 580 | if (!(ri->config_flags & VBUS_SW_ONLY)) |
| 581 | ri->rinfo->desc.ops = &tps80031_vbus_sw_ops; |
| 582 | break; |
| 583 | default: |
| 584 | break; |
| 585 | } |
| 586 | |
| 587 | /* Configure Active state to ON, SLEEP to OFF and OFF_state to OFF */ |
| 588 | ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->trans_reg, |
| 589 | TRANS_ACTIVE_ON | TRANS_SLEEP_OFF | TRANS_OFF_OFF, |
| 590 | TRANS_ACTIVE_MASK | TRANS_SLEEP_MASK | TRANS_OFF_MASK); |
| 591 | if (ret < 0) { |
| 592 | dev_err(ri->dev, "trans reg update failed, e %d\n", ret); |
| 593 | return ret; |
| 594 | } |
| 595 | |
| 596 | return ret; |
| 597 | } |
| 598 | |
| 599 | static int check_smps_mode_mult(struct device *parent, |
| 600 | struct tps80031_regulator *ri) |
| 601 | { |
| 602 | int mult_offset; |
| 603 | int ret; |
| 604 | u8 smps_offset; |
| 605 | u8 smps_mult; |
| 606 | |
| 607 | ret = tps80031_read(parent, SLAVE_ID1, |
| 608 | TPS80031_SMPS_OFFSET, &smps_offset); |
| 609 | if (ret < 0) { |
| 610 | dev_err(parent, "Error in reading smps offset register\n"); |
| 611 | return ret; |
| 612 | } |
| 613 | |
| 614 | ret = tps80031_read(parent, SLAVE_ID1, |
| 615 | TPS80031_SMPS_MULT, &smps_mult); |
| 616 | if (ret < 0) { |
| 617 | dev_err(parent, "Error in reading smps mult register\n"); |
| 618 | return ret; |
| 619 | } |
| 620 | |
| 621 | switch (ri->rinfo->desc.id) { |
| 622 | case TPS80031_REGULATOR_VIO: |
| 623 | mult_offset = SMPS_MULTOFFSET_VIO; |
| 624 | break; |
| 625 | case TPS80031_REGULATOR_SMPS1: |
| 626 | mult_offset = SMPS_MULTOFFSET_SMPS1; |
| 627 | break; |
| 628 | case TPS80031_REGULATOR_SMPS2: |
| 629 | mult_offset = SMPS_MULTOFFSET_SMPS2; |
| 630 | break; |
| 631 | case TPS80031_REGULATOR_SMPS3: |
| 632 | mult_offset = SMPS_MULTOFFSET_SMPS3; |
| 633 | break; |
| 634 | case TPS80031_REGULATOR_SMPS4: |
| 635 | mult_offset = SMPS_MULTOFFSET_SMPS4; |
| 636 | break; |
| 637 | case TPS80031_REGULATOR_LDO2: |
| 638 | ri->device_flags = smps_mult & BIT(5) ? TRACK_MODE_ENABLE : 0; |
| 639 | /* TRACK mode the ldo2 varies from 600mV to 1300mV */ |
| 640 | if (ri->device_flags & TRACK_MODE_ENABLE) { |
| 641 | ri->rinfo->desc.min_uV = 600000; |
| 642 | ri->rinfo->desc.uV_step = 12500; |
| 643 | ri->rinfo->desc.n_voltages = 57; |
| 644 | ri->rinfo->desc.vsel_mask = LDO_TRACK_VSEL_MASK; |
| 645 | } |
| 646 | return 0; |
| 647 | default: |
| 648 | return 0; |
| 649 | } |
| 650 | |
| 651 | ri->device_flags = (smps_offset & mult_offset) ? DCDC_OFFSET_EN : 0; |
| 652 | ri->device_flags |= (smps_mult & mult_offset) ? DCDC_EXTENDED_EN : 0; |
| 653 | switch (ri->device_flags) { |
| 654 | case 0: |
| 655 | ri->rinfo->desc.min_uV = 607700; |
| 656 | ri->rinfo->desc.uV_step = 12660; |
| 657 | break; |
| 658 | case DCDC_OFFSET_EN: |
| 659 | ri->rinfo->desc.min_uV = 700000; |
| 660 | ri->rinfo->desc.uV_step = 12500; |
| 661 | break; |
| 662 | case DCDC_EXTENDED_EN: |
| 663 | ri->rinfo->desc.min_uV = 1852000; |
| 664 | ri->rinfo->desc.uV_step = 38600; |
| 665 | break; |
| 666 | case DCDC_OFFSET_EN | DCDC_EXTENDED_EN: |
| 667 | ri->rinfo->desc.min_uV = 2161000; |
| 668 | ri->rinfo->desc.uV_step = 38600; |
| 669 | break; |
| 670 | } |
| 671 | return 0; |
| 672 | } |
| 673 | |
| 674 | static int __devinit tps80031_regulator_probe(struct platform_device *pdev) |
| 675 | { |
| 676 | struct tps80031_platform_data *pdata; |
| 677 | struct tps80031_regulator_platform_data *tps_pdata; |
| 678 | struct tps80031_regulator_info *rinfo; |
| 679 | struct tps80031_regulator *ri; |
| 680 | struct tps80031_regulator *pmic; |
| 681 | struct regulator_dev *rdev; |
| 682 | struct regulator_config config = { }; |
| 683 | int ret; |
| 684 | int num; |
| 685 | |
| 686 | pdata = dev_get_platdata(pdev->dev.parent); |
| 687 | |
| 688 | if (!pdata) { |
| 689 | dev_err(&pdev->dev, "No platform data\n"); |
| 690 | return -EINVAL; |
| 691 | } |
| 692 | |
| 693 | pmic = devm_kzalloc(&pdev->dev, |
| 694 | TPS80031_REGULATOR_MAX * sizeof(*pmic), GFP_KERNEL); |
| 695 | if (!pmic) { |
| 696 | dev_err(&pdev->dev, "mem alloc for pmic failed\n"); |
| 697 | return -ENOMEM; |
| 698 | } |
| 699 | |
| 700 | for (num = 0; num < TPS80031_REGULATOR_MAX; ++num) { |
| 701 | tps_pdata = pdata->regulator_pdata[num]; |
| 702 | rinfo = &tps80031_rinfo[num]; |
| 703 | ri = &pmic[num]; |
| 704 | ri->rinfo = rinfo; |
| 705 | ri->dev = &pdev->dev; |
| 706 | |
| 707 | check_smps_mode_mult(pdev->dev.parent, ri); |
| 708 | config.dev = &pdev->dev; |
| 709 | config.init_data = NULL; |
| 710 | config.driver_data = ri; |
| 711 | if (tps_pdata) { |
| 712 | config.init_data = tps_pdata->reg_init_data; |
| 713 | ri->config_flags = tps_pdata->config_flags; |
| 714 | ri->ext_ctrl_flag = tps_pdata->ext_ctrl_flag; |
| 715 | ret = tps80031_regulator_config(pdev->dev.parent, |
| 716 | ri, tps_pdata); |
| 717 | if (ret < 0) { |
| 718 | dev_err(&pdev->dev, |
| 719 | "regulator config failed, e %d\n", ret); |
| 720 | goto fail; |
| 721 | } |
| 722 | |
| 723 | ret = tps80031_power_req_config(pdev->dev.parent, |
| 724 | ri, tps_pdata); |
| 725 | if (ret < 0) { |
| 726 | dev_err(&pdev->dev, |
| 727 | "pwr_req config failed, err %d\n", ret); |
| 728 | goto fail; |
| 729 | } |
| 730 | } |
| 731 | rdev = regulator_register(&ri->rinfo->desc, &config); |
| 732 | if (IS_ERR_OR_NULL(rdev)) { |
| 733 | dev_err(&pdev->dev, |
| 734 | "register regulator failed %s\n", |
| 735 | ri->rinfo->desc.name); |
| 736 | ret = PTR_ERR(rdev); |
| 737 | goto fail; |
| 738 | } |
| 739 | ri->rdev = rdev; |
| 740 | } |
| 741 | |
| 742 | platform_set_drvdata(pdev, pmic); |
| 743 | return 0; |
| 744 | fail: |
| 745 | while (--num >= 0) { |
| 746 | ri = &pmic[num]; |
| 747 | regulator_unregister(ri->rdev); |
| 748 | } |
| 749 | return ret; |
| 750 | } |
| 751 | |
| 752 | static int __devexit tps80031_regulator_remove(struct platform_device *pdev) |
| 753 | { |
| 754 | struct tps80031_regulator *pmic = platform_get_drvdata(pdev); |
| 755 | struct tps80031_regulator *ri = NULL; |
| 756 | int num; |
| 757 | |
| 758 | for (num = 0; num < TPS80031_REGULATOR_MAX; ++num) { |
| 759 | ri = &pmic[num]; |
| 760 | regulator_unregister(ri->rdev); |
| 761 | } |
| 762 | return 0; |
| 763 | } |
| 764 | |
| 765 | static struct platform_driver tps80031_regulator_driver = { |
| 766 | .driver = { |
| 767 | .name = "tps80031-pmic", |
| 768 | .owner = THIS_MODULE, |
| 769 | }, |
| 770 | .probe = tps80031_regulator_probe, |
| 771 | .remove = __devexit_p(tps80031_regulator_remove), |
| 772 | }; |
| 773 | |
| 774 | static int __init tps80031_regulator_init(void) |
| 775 | { |
| 776 | return platform_driver_register(&tps80031_regulator_driver); |
| 777 | } |
| 778 | subsys_initcall(tps80031_regulator_init); |
| 779 | |
| 780 | static void __exit tps80031_regulator_exit(void) |
| 781 | { |
| 782 | platform_driver_unregister(&tps80031_regulator_driver); |
| 783 | } |
| 784 | module_exit(tps80031_regulator_exit); |
| 785 | |
| 786 | MODULE_ALIAS("platform:tps80031-regulator"); |
| 787 | MODULE_DESCRIPTION("Regulator Driver for TI TPS80031 PMIC"); |
| 788 | MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); |
| 789 | MODULE_LICENSE("GPL v2"); |