Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | /*********************************************************************** |
| 2 | * Copyright 2001 MontaVista Software Inc. |
| 3 | * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net |
| 4 | * |
| 5 | * arch/mips/ddb5xxx/ddb5477/pci_ops.c |
| 6 | * Define the pci_ops for DB5477. |
| 7 | * |
| 8 | * Much of the code is derived from the original DDB5074 port by |
| 9 | * Geert Uytterhoeven <geert@sonycom.com> |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or modify it |
| 12 | * under the terms of the GNU General Public License as published by the |
| 13 | * Free Software Foundation; either version 2 of the License, or (at your |
| 14 | * option) any later version. |
| 15 | *********************************************************************** |
| 16 | */ |
| 17 | |
| 18 | /* |
| 19 | * DDB5477 has two PCI channels, external PCI and IOPIC (internal) |
| 20 | * Therefore we provide two sets of pci_ops. |
| 21 | */ |
| 22 | #include <linux/pci.h> |
| 23 | #include <linux/kernel.h> |
| 24 | #include <linux/types.h> |
| 25 | |
| 26 | #include <asm/addrspace.h> |
| 27 | #include <asm/debug.h> |
| 28 | |
| 29 | #include <asm/ddb5xxx/ddb5xxx.h> |
| 30 | |
| 31 | /* |
| 32 | * config_swap structure records what set of pdar/pmr are used |
| 33 | * to access pci config space. It also provides a place hold the |
| 34 | * original values for future restoring. |
| 35 | */ |
| 36 | struct pci_config_swap { |
| 37 | u32 pdar; |
| 38 | u32 pmr; |
| 39 | u32 config_base; |
| 40 | u32 config_size; |
| 41 | u32 pdar_backup; |
| 42 | u32 pmr_backup; |
| 43 | }; |
| 44 | |
| 45 | /* |
| 46 | * On DDB5477, we have two sets of swap registers, for ext PCI and IOPCI. |
| 47 | */ |
| 48 | struct pci_config_swap ext_pci_swap = { |
| 49 | DDB_PCIW0, |
| 50 | DDB_PCIINIT00, |
| 51 | DDB_PCI0_CONFIG_BASE, |
| 52 | DDB_PCI0_CONFIG_SIZE |
| 53 | }; |
| 54 | struct pci_config_swap io_pci_swap = { |
| 55 | DDB_IOPCIW0, |
| 56 | DDB_PCIINIT01, |
| 57 | DDB_PCI1_CONFIG_BASE, |
| 58 | DDB_PCI1_CONFIG_SIZE |
| 59 | }; |
| 60 | |
| 61 | |
| 62 | /* |
| 63 | * access config space |
| 64 | */ |
| 65 | static inline u32 ddb_access_config_base(struct pci_config_swap *swap, u32 bus, /* 0 means top level bus */ |
| 66 | u32 slot_num) |
| 67 | { |
| 68 | u32 pci_addr = 0; |
| 69 | u32 pciinit_offset = 0; |
| 70 | u32 virt_addr; |
| 71 | u32 option; |
| 72 | |
| 73 | /* minimum pdar (window) size is 2MB */ |
| 74 | db_assert(swap->config_size >= (2 << 20)); |
| 75 | |
| 76 | db_assert(slot_num < (1 << 5)); |
| 77 | db_assert(bus < (1 << 8)); |
| 78 | |
| 79 | /* backup registers */ |
| 80 | swap->pdar_backup = ddb_in32(swap->pdar); |
| 81 | swap->pmr_backup = ddb_in32(swap->pmr); |
| 82 | |
| 83 | /* set the pdar (pci window) register */ |
| 84 | ddb_set_pdar(swap->pdar, swap->config_base, swap->config_size, 32, /* 32 bit wide */ |
| 85 | 0, /* not on local memory bus */ |
| 86 | 0); /* not visible from PCI bus (N/A) */ |
| 87 | |
| 88 | /* |
| 89 | * calcuate the absolute pci config addr; |
| 90 | * according to the spec, we start scanning from adr:11 (0x800) |
| 91 | */ |
| 92 | if (bus == 0) { |
| 93 | /* type 0 config */ |
| 94 | pci_addr = 0x800 << slot_num; |
| 95 | } else { |
| 96 | /* type 1 config */ |
| 97 | pci_addr = (bus << 16) | (slot_num << 11); |
| 98 | } |
| 99 | |
| 100 | /* |
| 101 | * if pci_addr is less than pci config window size, we set |
| 102 | * pciinit_offset to 0 and adjust the virt_address. |
| 103 | * Otherwise we will try to adjust pciinit_offset. |
| 104 | */ |
| 105 | if (pci_addr < swap->config_size) { |
| 106 | virt_addr = KSEG1ADDR(swap->config_base + pci_addr); |
| 107 | pciinit_offset = 0; |
| 108 | } else { |
| 109 | db_assert((pci_addr & (swap->config_size - 1)) == 0); |
| 110 | virt_addr = KSEG1ADDR(swap->config_base); |
| 111 | pciinit_offset = pci_addr; |
| 112 | } |
| 113 | |
| 114 | /* set the pmr register */ |
| 115 | option = DDB_PCI_ACCESS_32; |
| 116 | if (bus != 0) |
| 117 | option |= DDB_PCI_CFGTYPE1; |
| 118 | ddb_set_pmr(swap->pmr, DDB_PCICMD_CFG, pciinit_offset, option); |
| 119 | |
| 120 | return virt_addr; |
| 121 | } |
| 122 | |
| 123 | static inline void ddb_close_config_base(struct pci_config_swap *swap) |
| 124 | { |
| 125 | ddb_out32(swap->pdar, swap->pdar_backup); |
| 126 | ddb_out32(swap->pmr, swap->pmr_backup); |
| 127 | } |
| 128 | |
| 129 | static int read_config_dword(struct pci_config_swap *swap, |
| 130 | struct pci_bus *bus, u32 devfn, u32 where, |
| 131 | u32 * val) |
| 132 | { |
| 133 | u32 bus_num, slot_num, func_num; |
| 134 | u32 base; |
| 135 | |
| 136 | db_assert((where & 3) == 0); |
| 137 | db_assert(where < (1 << 8)); |
| 138 | |
| 139 | /* check if the bus is top-level */ |
| 140 | if (bus->parent != NULL) { |
| 141 | bus_num = bus->number; |
| 142 | db_assert(bus_num != 0); |
| 143 | } else { |
| 144 | bus_num = 0; |
| 145 | } |
| 146 | |
| 147 | slot_num = PCI_SLOT(devfn); |
| 148 | func_num = PCI_FUNC(devfn); |
| 149 | base = ddb_access_config_base(swap, bus_num, slot_num); |
| 150 | *val = *(volatile u32 *) (base + (func_num << 8) + where); |
| 151 | ddb_close_config_base(swap); |
| 152 | return PCIBIOS_SUCCESSFUL; |
| 153 | } |
| 154 | |
| 155 | static int read_config_word(struct pci_config_swap *swap, |
| 156 | struct pci_bus *bus, u32 devfn, u32 where, |
| 157 | u16 * val) |
| 158 | { |
| 159 | int status; |
| 160 | u32 result; |
| 161 | |
| 162 | db_assert((where & 1) == 0); |
| 163 | |
| 164 | status = read_config_dword(swap, bus, devfn, where & ~3, &result); |
| 165 | if (where & 2) |
| 166 | result >>= 16; |
| 167 | *val = result & 0xffff; |
| 168 | return status; |
| 169 | } |
| 170 | |
| 171 | static int read_config_byte(struct pci_config_swap *swap, |
| 172 | struct pci_bus *bus, u32 devfn, u32 where, |
| 173 | u8 * val) |
| 174 | { |
| 175 | int status; |
| 176 | u32 result; |
| 177 | |
| 178 | status = read_config_dword(swap, bus, devfn, where & ~3, &result); |
| 179 | if (where & 1) |
| 180 | result >>= 8; |
| 181 | if (where & 2) |
| 182 | result >>= 16; |
| 183 | *val = result & 0xff; |
| 184 | |
| 185 | return status; |
| 186 | } |
| 187 | |
| 188 | static int write_config_dword(struct pci_config_swap *swap, |
| 189 | struct pci_bus *bus, u32 devfn, u32 where, |
| 190 | u32 val) |
| 191 | { |
| 192 | u32 bus_num, slot_num, func_num; |
| 193 | u32 base; |
| 194 | |
| 195 | db_assert((where & 3) == 0); |
| 196 | db_assert(where < (1 << 8)); |
| 197 | |
| 198 | /* check if the bus is top-level */ |
| 199 | if (bus->parent != NULL) { |
| 200 | bus_num = bus->number; |
| 201 | db_assert(bus_num != 0); |
| 202 | } else { |
| 203 | bus_num = 0; |
| 204 | } |
| 205 | |
| 206 | slot_num = PCI_SLOT(devfn); |
| 207 | func_num = PCI_FUNC(devfn); |
| 208 | base = ddb_access_config_base(swap, bus_num, slot_num); |
| 209 | *(volatile u32 *) (base + (func_num << 8) + where) = val; |
| 210 | ddb_close_config_base(swap); |
| 211 | return PCIBIOS_SUCCESSFUL; |
| 212 | } |
| 213 | |
| 214 | static int write_config_word(struct pci_config_swap *swap, |
| 215 | struct pci_bus *bus, u32 devfn, u32 where, u16 val) |
| 216 | { |
| 217 | int status, shift = 0; |
| 218 | u32 result; |
| 219 | |
| 220 | db_assert((where & 1) == 0); |
| 221 | |
| 222 | status = read_config_dword(swap, bus, devfn, where & ~3, &result); |
| 223 | if (status != PCIBIOS_SUCCESSFUL) |
| 224 | return status; |
| 225 | |
| 226 | if (where & 2) |
| 227 | shift += 16; |
| 228 | result &= ~(0xffff << shift); |
| 229 | result |= val << shift; |
| 230 | return write_config_dword(swap, bus, devfn, where & ~3, result); |
| 231 | } |
| 232 | |
| 233 | static int write_config_byte(struct pci_config_swap *swap, |
| 234 | struct pci_bus *bus, u32 devfn, u32 where, u8 val) |
| 235 | { |
| 236 | int status, shift = 0; |
| 237 | u32 result; |
| 238 | |
| 239 | status = read_config_dword(swap, bus, devfn, where & ~3, &result); |
| 240 | if (status != PCIBIOS_SUCCESSFUL) |
| 241 | return status; |
| 242 | |
| 243 | if (where & 2) |
| 244 | shift += 16; |
| 245 | if (where & 1) |
| 246 | shift += 8; |
| 247 | result &= ~(0xff << shift); |
| 248 | result |= val << shift; |
| 249 | return write_config_dword(swap, bus, devfn, where & ~3, result); |
| 250 | } |
| 251 | |
| 252 | #define MAKE_PCI_OPS(prefix, rw, pciswap, star) \ |
| 253 | static int prefix##_##rw##_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 star val) \ |
| 254 | { \ |
| 255 | if (size == 1) \ |
| 256 | return rw##_config_byte(pciswap, bus, devfn, where, (u8 star)val); \ |
| 257 | else if (size == 2) \ |
| 258 | return rw##_config_word(pciswap, bus, devfn, where, (u16 star)val); \ |
| 259 | /* Size must be 4 */ \ |
| 260 | return rw##_config_dword(pciswap, bus, devfn, where, val); \ |
| 261 | } |
| 262 | |
| 263 | MAKE_PCI_OPS(extpci, read, &ext_pci_swap, *) |
| 264 | MAKE_PCI_OPS(extpci, write, &ext_pci_swap,) |
| 265 | |
| 266 | MAKE_PCI_OPS(iopci, read, &io_pci_swap, *) |
| 267 | MAKE_PCI_OPS(iopci, write, &io_pci_swap,) |
| 268 | |
| 269 | struct pci_ops ddb5477_ext_pci_ops = { |
| 270 | .read = extpci_read_config, |
| 271 | .write = extpci_write_config |
| 272 | }; |
| 273 | |
| 274 | |
| 275 | struct pci_ops ddb5477_io_pci_ops = { |
| 276 | .read = iopci_read_config, |
| 277 | .write = iopci_write_config |
| 278 | }; |