Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * $Id: mt20xx.c,v 1.4 2005/03/04 09:24:56 kraxel Exp $ |
| 3 | * |
| 4 | * i2c tv tuner chip device driver |
| 5 | * controls microtune tuners, mt2032 + mt2050 at the moment. |
| 6 | */ |
| 7 | #include <linux/delay.h> |
| 8 | #include <linux/i2c.h> |
| 9 | #include <linux/videodev.h> |
| 10 | #include <linux/moduleparam.h> |
| 11 | #include <media/tuner.h> |
| 12 | |
| 13 | /* ---------------------------------------------------------------------- */ |
| 14 | |
| 15 | static unsigned int optimize_vco = 1; |
| 16 | module_param(optimize_vco, int, 0644); |
| 17 | |
| 18 | static unsigned int tv_antenna = 1; |
| 19 | module_param(tv_antenna, int, 0644); |
| 20 | |
| 21 | static unsigned int radio_antenna = 0; |
| 22 | module_param(radio_antenna, int, 0644); |
| 23 | |
| 24 | /* ---------------------------------------------------------------------- */ |
| 25 | |
| 26 | #define MT2032 0x04 |
| 27 | #define MT2030 0x06 |
| 28 | #define MT2040 0x07 |
| 29 | #define MT2050 0x42 |
| 30 | |
| 31 | static char *microtune_part[] = { |
| 32 | [ MT2030 ] = "MT2030", |
| 33 | [ MT2032 ] = "MT2032", |
| 34 | [ MT2040 ] = "MT2040", |
| 35 | [ MT2050 ] = "MT2050", |
| 36 | }; |
| 37 | |
| 38 | // IsSpurInBand()? |
| 39 | static int mt2032_spurcheck(struct i2c_client *c, |
| 40 | int f1, int f2, int spectrum_from,int spectrum_to) |
| 41 | { |
| 42 | struct tuner *t = i2c_get_clientdata(c); |
| 43 | int n1=1,n2,f; |
| 44 | |
| 45 | f1=f1/1000; //scale to kHz to avoid 32bit overflows |
| 46 | f2=f2/1000; |
| 47 | spectrum_from/=1000; |
| 48 | spectrum_to/=1000; |
| 49 | |
| 50 | tuner_dbg("spurcheck f1=%d f2=%d from=%d to=%d\n", |
| 51 | f1,f2,spectrum_from,spectrum_to); |
| 52 | |
| 53 | do { |
| 54 | n2=-n1; |
| 55 | f=n1*(f1-f2); |
| 56 | do { |
| 57 | n2--; |
| 58 | f=f-f2; |
| 59 | tuner_dbg("spurtest n1=%d n2=%d ftest=%d\n",n1,n2,f); |
| 60 | |
| 61 | if( (f>spectrum_from) && (f<spectrum_to)) |
| 62 | tuner_dbg("mt2032 spurcheck triggered: %d\n",n1); |
| 63 | } while ( (f>(f2-spectrum_to)) || (n2>-5)); |
| 64 | n1++; |
| 65 | } while (n1<5); |
| 66 | |
| 67 | return 1; |
| 68 | } |
| 69 | |
| 70 | static int mt2032_compute_freq(struct i2c_client *c, |
| 71 | unsigned int rfin, |
| 72 | unsigned int if1, unsigned int if2, |
| 73 | unsigned int spectrum_from, |
| 74 | unsigned int spectrum_to, |
| 75 | unsigned char *buf, |
| 76 | int *ret_sel, |
| 77 | unsigned int xogc) //all in Hz |
| 78 | { |
| 79 | struct tuner *t = i2c_get_clientdata(c); |
| 80 | unsigned int fref,lo1,lo1n,lo1a,s,sel,lo1freq, desired_lo1, |
| 81 | desired_lo2,lo2,lo2n,lo2a,lo2num,lo2freq; |
| 82 | |
| 83 | fref= 5250 *1000; //5.25MHz |
| 84 | desired_lo1=rfin+if1; |
| 85 | |
| 86 | lo1=(2*(desired_lo1/1000)+(fref/1000)) / (2*fref/1000); |
| 87 | lo1n=lo1/8; |
| 88 | lo1a=lo1-(lo1n*8); |
| 89 | |
| 90 | s=rfin/1000/1000+1090; |
| 91 | |
| 92 | if(optimize_vco) { |
| 93 | if(s>1890) sel=0; |
| 94 | else if(s>1720) sel=1; |
| 95 | else if(s>1530) sel=2; |
| 96 | else if(s>1370) sel=3; |
| 97 | else sel=4; // >1090 |
| 98 | } |
| 99 | else { |
| 100 | if(s>1790) sel=0; // <1958 |
| 101 | else if(s>1617) sel=1; |
| 102 | else if(s>1449) sel=2; |
| 103 | else if(s>1291) sel=3; |
| 104 | else sel=4; // >1090 |
| 105 | } |
| 106 | *ret_sel=sel; |
| 107 | |
| 108 | lo1freq=(lo1a+8*lo1n)*fref; |
| 109 | |
| 110 | tuner_dbg("mt2032: rfin=%d lo1=%d lo1n=%d lo1a=%d sel=%d, lo1freq=%d\n", |
| 111 | rfin,lo1,lo1n,lo1a,sel,lo1freq); |
| 112 | |
| 113 | desired_lo2=lo1freq-rfin-if2; |
| 114 | lo2=(desired_lo2)/fref; |
| 115 | lo2n=lo2/8; |
| 116 | lo2a=lo2-(lo2n*8); |
| 117 | lo2num=((desired_lo2/1000)%(fref/1000))* 3780/(fref/1000); //scale to fit in 32bit arith |
| 118 | lo2freq=(lo2a+8*lo2n)*fref + lo2num*(fref/1000)/3780*1000; |
| 119 | |
| 120 | tuner_dbg("mt2032: rfin=%d lo2=%d lo2n=%d lo2a=%d num=%d lo2freq=%d\n", |
| 121 | rfin,lo2,lo2n,lo2a,lo2num,lo2freq); |
| 122 | |
| 123 | if(lo1a<0 || lo1a>7 || lo1n<17 ||lo1n>48 || lo2a<0 ||lo2a >7 ||lo2n<17 || lo2n>30) { |
| 124 | tuner_info("mt2032: frequency parameters out of range: %d %d %d %d\n", |
| 125 | lo1a, lo1n, lo2a,lo2n); |
| 126 | return(-1); |
| 127 | } |
| 128 | |
| 129 | mt2032_spurcheck(c, lo1freq, desired_lo2, spectrum_from, spectrum_to); |
| 130 | // should recalculate lo1 (one step up/down) |
| 131 | |
| 132 | // set up MT2032 register map for transfer over i2c |
| 133 | buf[0]=lo1n-1; |
| 134 | buf[1]=lo1a | (sel<<4); |
| 135 | buf[2]=0x86; // LOGC |
| 136 | buf[3]=0x0f; //reserved |
| 137 | buf[4]=0x1f; |
| 138 | buf[5]=(lo2n-1) | (lo2a<<5); |
| 139 | if(rfin >400*1000*1000) |
| 140 | buf[6]=0xe4; |
| 141 | else |
| 142 | buf[6]=0xf4; // set PKEN per rev 1.2 |
| 143 | buf[7]=8+xogc; |
| 144 | buf[8]=0xc3; //reserved |
| 145 | buf[9]=0x4e; //reserved |
| 146 | buf[10]=0xec; //reserved |
| 147 | buf[11]=(lo2num&0xff); |
| 148 | buf[12]=(lo2num>>8) |0x80; // Lo2RST |
| 149 | |
| 150 | return 0; |
| 151 | } |
| 152 | |
| 153 | static int mt2032_check_lo_lock(struct i2c_client *c) |
| 154 | { |
| 155 | struct tuner *t = i2c_get_clientdata(c); |
| 156 | int try,lock=0; |
| 157 | unsigned char buf[2]; |
| 158 | |
| 159 | for(try=0;try<10;try++) { |
| 160 | buf[0]=0x0e; |
| 161 | i2c_master_send(c,buf,1); |
| 162 | i2c_master_recv(c,buf,1); |
| 163 | tuner_dbg("mt2032 Reg.E=0x%02x\n",buf[0]); |
| 164 | lock=buf[0] &0x06; |
| 165 | |
| 166 | if (lock==6) |
| 167 | break; |
| 168 | |
| 169 | tuner_dbg("mt2032: pll wait 1ms for lock (0x%2x)\n",buf[0]); |
| 170 | udelay(1000); |
| 171 | } |
| 172 | return lock; |
| 173 | } |
| 174 | |
| 175 | static int mt2032_optimize_vco(struct i2c_client *c,int sel,int lock) |
| 176 | { |
| 177 | struct tuner *t = i2c_get_clientdata(c); |
| 178 | unsigned char buf[2]; |
| 179 | int tad1; |
| 180 | |
| 181 | buf[0]=0x0f; |
| 182 | i2c_master_send(c,buf,1); |
| 183 | i2c_master_recv(c,buf,1); |
| 184 | tuner_dbg("mt2032 Reg.F=0x%02x\n",buf[0]); |
| 185 | tad1=buf[0]&0x07; |
| 186 | |
| 187 | if(tad1 ==0) return lock; |
| 188 | if(tad1 ==1) return lock; |
| 189 | |
| 190 | if(tad1==2) { |
| 191 | if(sel==0) |
| 192 | return lock; |
| 193 | else sel--; |
| 194 | } |
| 195 | else { |
| 196 | if(sel<4) |
| 197 | sel++; |
| 198 | else |
| 199 | return lock; |
| 200 | } |
| 201 | |
| 202 | tuner_dbg("mt2032 optimize_vco: sel=%d\n",sel); |
| 203 | |
| 204 | buf[0]=0x0f; |
| 205 | buf[1]=sel; |
| 206 | i2c_master_send(c,buf,2); |
| 207 | lock=mt2032_check_lo_lock(c); |
| 208 | return lock; |
| 209 | } |
| 210 | |
| 211 | |
| 212 | static void mt2032_set_if_freq(struct i2c_client *c, unsigned int rfin, |
| 213 | unsigned int if1, unsigned int if2, |
| 214 | unsigned int from, unsigned int to) |
| 215 | { |
| 216 | unsigned char buf[21]; |
| 217 | int lint_try,ret,sel,lock=0; |
| 218 | struct tuner *t = i2c_get_clientdata(c); |
| 219 | |
| 220 | tuner_dbg("mt2032_set_if_freq rfin=%d if1=%d if2=%d from=%d to=%d\n", |
| 221 | rfin,if1,if2,from,to); |
| 222 | |
| 223 | buf[0]=0; |
| 224 | ret=i2c_master_send(c,buf,1); |
| 225 | i2c_master_recv(c,buf,21); |
| 226 | |
| 227 | buf[0]=0; |
| 228 | ret=mt2032_compute_freq(c,rfin,if1,if2,from,to,&buf[1],&sel,t->xogc); |
| 229 | if (ret<0) |
| 230 | return; |
| 231 | |
| 232 | // send only the relevant registers per Rev. 1.2 |
| 233 | buf[0]=0; |
| 234 | ret=i2c_master_send(c,buf,4); |
| 235 | buf[5]=5; |
| 236 | ret=i2c_master_send(c,buf+5,4); |
| 237 | buf[11]=11; |
| 238 | ret=i2c_master_send(c,buf+11,3); |
| 239 | if(ret!=3) |
| 240 | tuner_warn("i2c i/o error: rc == %d (should be 3)\n",ret); |
| 241 | |
| 242 | // wait for PLLs to lock (per manual), retry LINT if not. |
| 243 | for(lint_try=0; lint_try<2; lint_try++) { |
| 244 | lock=mt2032_check_lo_lock(c); |
| 245 | |
| 246 | if(optimize_vco) |
| 247 | lock=mt2032_optimize_vco(c,sel,lock); |
| 248 | if(lock==6) break; |
| 249 | |
| 250 | tuner_dbg("mt2032: re-init PLLs by LINT\n"); |
| 251 | buf[0]=7; |
| 252 | buf[1]=0x80 +8+t->xogc; // set LINT to re-init PLLs |
| 253 | i2c_master_send(c,buf,2); |
| 254 | mdelay(10); |
| 255 | buf[1]=8+t->xogc; |
| 256 | i2c_master_send(c,buf,2); |
| 257 | } |
| 258 | |
| 259 | if (lock!=6) |
| 260 | tuner_warn("MT2032 Fatal Error: PLLs didn't lock.\n"); |
| 261 | |
| 262 | buf[0]=2; |
| 263 | buf[1]=0x20; // LOGC for optimal phase noise |
| 264 | ret=i2c_master_send(c,buf,2); |
| 265 | if (ret!=2) |
| 266 | tuner_warn("i2c i/o error: rc == %d (should be 2)\n",ret); |
| 267 | } |
| 268 | |
| 269 | |
| 270 | static void mt2032_set_tv_freq(struct i2c_client *c, unsigned int freq) |
| 271 | { |
| 272 | struct tuner *t = i2c_get_clientdata(c); |
| 273 | int if2,from,to; |
| 274 | |
| 275 | // signal bandwidth and picture carrier |
| 276 | if (t->std & V4L2_STD_525_60) { |
| 277 | // NTSC |
| 278 | from = 40750*1000; |
| 279 | to = 46750*1000; |
| 280 | if2 = 45750*1000; |
| 281 | } else { |
| 282 | // PAL |
| 283 | from = 32900*1000; |
| 284 | to = 39900*1000; |
| 285 | if2 = 38900*1000; |
| 286 | } |
| 287 | |
| 288 | mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */, |
| 289 | 1090*1000*1000, if2, from, to); |
| 290 | } |
| 291 | |
| 292 | static void mt2032_set_radio_freq(struct i2c_client *c, unsigned int freq) |
| 293 | { |
| 294 | struct tuner *t = i2c_get_clientdata(c); |
| 295 | int if2 = t->radio_if2; |
| 296 | |
| 297 | // per Manual for FM tuning: first if center freq. 1085 MHz |
| 298 | mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */, |
| 299 | 1085*1000*1000,if2,if2,if2); |
| 300 | } |
| 301 | |
| 302 | // Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001 |
| 303 | static int mt2032_init(struct i2c_client *c) |
| 304 | { |
| 305 | struct tuner *t = i2c_get_clientdata(c); |
| 306 | unsigned char buf[21]; |
| 307 | int ret,xogc,xok=0; |
| 308 | |
| 309 | // Initialize Registers per spec. |
| 310 | buf[1]=2; // Index to register 2 |
| 311 | buf[2]=0xff; |
| 312 | buf[3]=0x0f; |
| 313 | buf[4]=0x1f; |
| 314 | ret=i2c_master_send(c,buf+1,4); |
| 315 | |
| 316 | buf[5]=6; // Index register 6 |
| 317 | buf[6]=0xe4; |
| 318 | buf[7]=0x8f; |
| 319 | buf[8]=0xc3; |
| 320 | buf[9]=0x4e; |
| 321 | buf[10]=0xec; |
| 322 | ret=i2c_master_send(c,buf+5,6); |
| 323 | |
| 324 | buf[12]=13; // Index register 13 |
| 325 | buf[13]=0x32; |
| 326 | ret=i2c_master_send(c,buf+12,2); |
| 327 | |
| 328 | // Adjust XOGC (register 7), wait for XOK |
| 329 | xogc=7; |
| 330 | do { |
| 331 | tuner_dbg("mt2032: xogc = 0x%02x\n",xogc&0x07); |
| 332 | mdelay(10); |
| 333 | buf[0]=0x0e; |
| 334 | i2c_master_send(c,buf,1); |
| 335 | i2c_master_recv(c,buf,1); |
| 336 | xok=buf[0]&0x01; |
| 337 | tuner_dbg("mt2032: xok = 0x%02x\n",xok); |
| 338 | if (xok == 1) break; |
| 339 | |
| 340 | xogc--; |
| 341 | tuner_dbg("mt2032: xogc = 0x%02x\n",xogc&0x07); |
| 342 | if (xogc == 3) { |
| 343 | xogc=4; // min. 4 per spec |
| 344 | break; |
| 345 | } |
| 346 | buf[0]=0x07; |
| 347 | buf[1]=0x88 + xogc; |
| 348 | ret=i2c_master_send(c,buf,2); |
| 349 | if (ret!=2) |
| 350 | tuner_warn("i2c i/o error: rc == %d (should be 2)\n",ret); |
| 351 | } while (xok != 1 ); |
| 352 | t->xogc=xogc; |
| 353 | |
| 354 | t->tv_freq = mt2032_set_tv_freq; |
| 355 | t->radio_freq = mt2032_set_radio_freq; |
| 356 | return(1); |
| 357 | } |
| 358 | |
| 359 | static void mt2050_set_antenna(struct i2c_client *c, unsigned char antenna) |
| 360 | { |
| 361 | struct tuner *t = i2c_get_clientdata(c); |
| 362 | unsigned char buf[2]; |
| 363 | int ret; |
| 364 | |
| 365 | buf[0] = 6; |
| 366 | buf[1] = antenna ? 0x11 : 0x10; |
| 367 | ret=i2c_master_send(c,buf,2); |
| 368 | tuner_dbg("mt2050: enabled antenna connector %d\n", antenna); |
| 369 | } |
| 370 | |
| 371 | static void mt2050_set_if_freq(struct i2c_client *c,unsigned int freq, unsigned int if2) |
| 372 | { |
| 373 | struct tuner *t = i2c_get_clientdata(c); |
| 374 | unsigned int if1=1218*1000*1000; |
| 375 | unsigned int f_lo1,f_lo2,lo1,lo2,f_lo1_modulo,f_lo2_modulo,num1,num2,div1a,div1b,div2a,div2b; |
| 376 | int ret; |
| 377 | unsigned char buf[6]; |
| 378 | |
| 379 | tuner_dbg("mt2050_set_if_freq freq=%d if1=%d if2=%d\n", |
| 380 | freq,if1,if2); |
| 381 | |
| 382 | f_lo1=freq+if1; |
| 383 | f_lo1=(f_lo1/1000000)*1000000; |
| 384 | |
| 385 | f_lo2=f_lo1-freq-if2; |
| 386 | f_lo2=(f_lo2/50000)*50000; |
| 387 | |
| 388 | lo1=f_lo1/4000000; |
| 389 | lo2=f_lo2/4000000; |
| 390 | |
| 391 | f_lo1_modulo= f_lo1-(lo1*4000000); |
| 392 | f_lo2_modulo= f_lo2-(lo2*4000000); |
| 393 | |
| 394 | num1=4*f_lo1_modulo/4000000; |
| 395 | num2=4096*(f_lo2_modulo/1000)/4000; |
| 396 | |
| 397 | // todo spurchecks |
| 398 | |
| 399 | div1a=(lo1/12)-1; |
| 400 | div1b=lo1-(div1a+1)*12; |
| 401 | |
| 402 | div2a=(lo2/8)-1; |
| 403 | div2b=lo2-(div2a+1)*8; |
| 404 | |
| 405 | if (tuner_debug > 1) { |
| 406 | tuner_dbg("lo1 lo2 = %d %d\n", lo1, lo2); |
| 407 | tuner_dbg("num1 num2 div1a div1b div2a div2b= %x %x %x %x %x %x\n", |
| 408 | num1,num2,div1a,div1b,div2a,div2b); |
| 409 | } |
| 410 | |
| 411 | buf[0]=1; |
| 412 | buf[1]= 4*div1b + num1; |
| 413 | if(freq<275*1000*1000) buf[1] = buf[1]|0x80; |
| 414 | |
| 415 | buf[2]=div1a; |
| 416 | buf[3]=32*div2b + num2/256; |
| 417 | buf[4]=num2-(num2/256)*256; |
| 418 | buf[5]=div2a; |
| 419 | if(num2!=0) buf[5]=buf[5]|0x40; |
| 420 | |
| 421 | if (tuner_debug > 1) { |
| 422 | int i; |
| 423 | tuner_dbg("bufs is: "); |
| 424 | for(i=0;i<6;i++) |
| 425 | printk("%x ",buf[i]); |
| 426 | printk("\n"); |
| 427 | } |
| 428 | |
| 429 | ret=i2c_master_send(c,buf,6); |
| 430 | if (ret!=6) |
| 431 | tuner_warn("i2c i/o error: rc == %d (should be 6)\n",ret); |
| 432 | } |
| 433 | |
| 434 | static void mt2050_set_tv_freq(struct i2c_client *c, unsigned int freq) |
| 435 | { |
| 436 | struct tuner *t = i2c_get_clientdata(c); |
| 437 | unsigned int if2; |
| 438 | |
| 439 | if (t->std & V4L2_STD_525_60) { |
| 440 | // NTSC |
| 441 | if2 = 45750*1000; |
| 442 | } else { |
| 443 | // PAL |
| 444 | if2 = 38900*1000; |
| 445 | } |
| 446 | if (V4L2_TUNER_DIGITAL_TV == t->mode) { |
| 447 | // DVB (pinnacle 300i) |
| 448 | if2 = 36150*1000; |
| 449 | } |
| 450 | mt2050_set_if_freq(c, freq*62500, if2); |
| 451 | mt2050_set_antenna(c, tv_antenna); |
| 452 | } |
| 453 | |
| 454 | static void mt2050_set_radio_freq(struct i2c_client *c, unsigned int freq) |
| 455 | { |
| 456 | struct tuner *t = i2c_get_clientdata(c); |
| 457 | int if2 = t->radio_if2; |
| 458 | |
| 459 | mt2050_set_if_freq(c, freq*62500, if2); |
| 460 | mt2050_set_antenna(c, radio_antenna); |
| 461 | } |
| 462 | |
| 463 | static int mt2050_init(struct i2c_client *c) |
| 464 | { |
| 465 | struct tuner *t = i2c_get_clientdata(c); |
| 466 | unsigned char buf[2]; |
| 467 | int ret; |
| 468 | |
| 469 | buf[0]=6; |
| 470 | buf[1]=0x10; |
| 471 | ret=i2c_master_send(c,buf,2); // power |
| 472 | |
| 473 | buf[0]=0x0f; |
| 474 | buf[1]=0x0f; |
| 475 | ret=i2c_master_send(c,buf,2); // m1lo |
| 476 | |
| 477 | buf[0]=0x0d; |
| 478 | ret=i2c_master_send(c,buf,1); |
| 479 | i2c_master_recv(c,buf,1); |
| 480 | |
| 481 | tuner_dbg("mt2050: sro is %x\n",buf[0]); |
| 482 | t->tv_freq = mt2050_set_tv_freq; |
| 483 | t->radio_freq = mt2050_set_radio_freq; |
| 484 | return 0; |
| 485 | } |
| 486 | |
| 487 | int microtune_init(struct i2c_client *c) |
| 488 | { |
| 489 | struct tuner *t = i2c_get_clientdata(c); |
| 490 | char *name; |
| 491 | unsigned char buf[21]; |
| 492 | int company_code; |
| 493 | |
| 494 | memset(buf,0,sizeof(buf)); |
| 495 | t->tv_freq = NULL; |
| 496 | t->radio_freq = NULL; |
| 497 | name = "unknown"; |
| 498 | |
| 499 | i2c_master_send(c,buf,1); |
| 500 | i2c_master_recv(c,buf,21); |
| 501 | if (tuner_debug) { |
| 502 | int i; |
| 503 | tuner_dbg("MT20xx hexdump:"); |
| 504 | for(i=0;i<21;i++) { |
| 505 | printk(" %02x",buf[i]); |
| 506 | if(((i+1)%8)==0) printk(" "); |
| 507 | } |
| 508 | printk("\n"); |
| 509 | } |
| 510 | company_code = buf[0x11] << 8 | buf[0x12]; |
| 511 | tuner_info("microtune: companycode=%04x part=%02x rev=%02x\n", |
| 512 | company_code,buf[0x13],buf[0x14]); |
| 513 | |
| 514 | #if 0 |
| 515 | /* seems to cause more problems than it solves ... */ |
| 516 | switch (company_code) { |
| 517 | case 0x30bf: |
| 518 | case 0x3cbf: |
| 519 | case 0x3dbf: |
| 520 | case 0x4d54: |
| 521 | case 0x8e81: |
| 522 | case 0x8e91: |
| 523 | /* ok (?) */ |
| 524 | break; |
| 525 | default: |
| 526 | tuner_warn("tuner: microtune: unknown companycode\n"); |
| 527 | return 0; |
| 528 | } |
| 529 | #endif |
| 530 | |
| 531 | if (buf[0x13] < ARRAY_SIZE(microtune_part) && |
| 532 | NULL != microtune_part[buf[0x13]]) |
| 533 | name = microtune_part[buf[0x13]]; |
| 534 | switch (buf[0x13]) { |
| 535 | case MT2032: |
| 536 | mt2032_init(c); |
| 537 | break; |
| 538 | case MT2050: |
| 539 | mt2050_init(c); |
| 540 | break; |
| 541 | default: |
| 542 | tuner_info("microtune %s found, not (yet?) supported, sorry :-/\n", |
| 543 | name); |
| 544 | return 0; |
| 545 | } |
| 546 | |
| 547 | strlcpy(c->name, name, sizeof(c->name)); |
| 548 | tuner_info("microtune %s found, OK\n",name); |
| 549 | return 0; |
| 550 | } |
| 551 | |
| 552 | /* |
| 553 | * Overrides for Emacs so that we follow Linus's tabbing style. |
| 554 | * --------------------------------------------------------------------------- |
| 555 | * Local variables: |
| 556 | * c-basic-offset: 8 |
| 557 | * End: |
| 558 | */ |