Blame - drivers/net/sunqe.h - kernel/msm-4.19

Linus Torvalds

1da177e

2005-04-16 15:20:36 -0700

[diff] [blame^]

1

/* $Id: sunqe.h,v 1.13 2000/02/09 11:15:42 davem Exp $

2

* sunqe.h: Definitions for the Sun QuadEthernet driver.

*

*/

#ifndef _SUNQE_H

#define _SUNQE_H

/* QEC global registers. */

11

#define GLOB_CTRL 0x00UL /* Control */

12

#define GLOB_STAT 0x04UL /* Status */

13

#define GLOB_PSIZE 0x08UL /* Packet Size */

14

#define GLOB_MSIZE 0x0cUL /* Local-memory Size */

15

#define GLOB_RSIZE 0x10UL /* Receive partition size */

16

#define GLOB_TSIZE 0x14UL /* Transmit partition size */

17

#define GLOB_REG_SIZE 0x18UL

18

19

#define GLOB_CTRL_MMODE 0x40000000 /* MACE qec mode */

20

#define GLOB_CTRL_BMODE 0x10000000 /* BigMAC qec mode */

21

#define GLOB_CTRL_EPAR 0x00000020 /* Enable parity */

22

#define GLOB_CTRL_ACNTRL 0x00000018 /* SBUS arbitration control */

23

#define GLOB_CTRL_B64 0x00000004 /* 64 byte dvma bursts */

24

#define GLOB_CTRL_B32 0x00000002 /* 32 byte dvma bursts */

25

#define GLOB_CTRL_B16 0x00000000 /* 16 byte dvma bursts */

26

#define GLOB_CTRL_RESET 0x00000001 /* Reset the QEC */

27

28

#define GLOB_STAT_TX 0x00000008 /* BigMAC Transmit IRQ */

29

#define GLOB_STAT_RX 0x00000004 /* BigMAC Receive IRQ */

30

#define GLOB_STAT_BM 0x00000002 /* BigMAC Global IRQ */

31

#define GLOB_STAT_ER 0x00000001 /* BigMAC Error IRQ */

32

33

#define GLOB_PSIZE_2048 0x00 /* 2k packet size */

34

#define GLOB_PSIZE_4096 0x01 /* 4k packet size */

35

#define GLOB_PSIZE_6144 0x10 /* 6k packet size */

36

#define GLOB_PSIZE_8192 0x11 /* 8k packet size */

37

38

/* In MACE mode, there are four qe channels. Each channel has it's own

39

* status bits in the QEC status register. This macro picks out the

40

* ones you want.

41

*/

42

#define GLOB_STAT_PER_QE(status, channel) (((status) >> ((channel) * 4)) & 0xf)

43

44

/* The following registers are for per-qe channel information/status. */

45

#define CREG_CTRL 0x00UL /* Control */

46

#define CREG_STAT 0x04UL /* Status */

47

#define CREG_RXDS 0x08UL /* RX descriptor ring ptr */

48

#define CREG_TXDS 0x0cUL /* TX descriptor ring ptr */

49

#define CREG_RIMASK 0x10UL /* RX Interrupt Mask */

50

#define CREG_TIMASK 0x14UL /* TX Interrupt Mask */

51

#define CREG_QMASK 0x18UL /* QEC Error Interrupt Mask */

52

#define CREG_MMASK 0x1cUL /* MACE Error Interrupt Mask */

53

#define CREG_RXWBUFPTR 0x20UL /* Local memory rx write ptr */

54

#define CREG_RXRBUFPTR 0x24UL /* Local memory rx read ptr */

55

#define CREG_TXWBUFPTR 0x28UL /* Local memory tx write ptr */

56

#define CREG_TXRBUFPTR 0x2cUL /* Local memory tx read ptr */

57

#define CREG_CCNT 0x30UL /* Collision Counter */

58

#define CREG_PIPG 0x34UL /* Inter-Frame Gap */

59

#define CREG_REG_SIZE 0x38UL

60

61

#define CREG_CTRL_RXOFF 0x00000004 /* Disable this qe's receiver*/

62

#define CREG_CTRL_RESET 0x00000002 /* Reset this qe channel */

63

#define CREG_CTRL_TWAKEUP 0x00000001 /* Transmitter Wakeup, 'go'. */

64

65

#define CREG_STAT_EDEFER 0x10000000 /* Excessive Defers */

66

#define CREG_STAT_CLOSS 0x08000000 /* Carrier Loss */

67

#define CREG_STAT_ERETRIES 0x04000000 /* More than 16 retries */

68

#define CREG_STAT_LCOLL 0x02000000 /* Late TX Collision */

69

#define CREG_STAT_FUFLOW 0x01000000 /* FIFO Underflow */

70

#define CREG_STAT_JERROR 0x00800000 /* Jabber Error */

71

#define CREG_STAT_BERROR 0x00400000 /* Babble Error */

72

#define CREG_STAT_TXIRQ 0x00200000 /* Transmit Interrupt */

73

#define CREG_STAT_CCOFLOW 0x00100000 /* TX Coll-counter Overflow */

74

#define CREG_STAT_TXDERROR 0x00080000 /* TX Descriptor is bogus */

75

#define CREG_STAT_TXLERR 0x00040000 /* Late Transmit Error */

76

#define CREG_STAT_TXPERR 0x00020000 /* Transmit Parity Error */

77

#define CREG_STAT_TXSERR 0x00010000 /* Transmit SBUS error ack */

78

#define CREG_STAT_RCCOFLOW 0x00001000 /* RX Coll-counter Overflow */

79

#define CREG_STAT_RUOFLOW 0x00000800 /* Runt Counter Overflow */

80

#define CREG_STAT_MCOFLOW 0x00000400 /* Missed Counter Overflow */

81

#define CREG_STAT_RXFOFLOW 0x00000200 /* RX FIFO Overflow */

82

#define CREG_STAT_RLCOLL 0x00000100 /* RX Late Collision */

83

#define CREG_STAT_FCOFLOW 0x00000080 /* Frame Counter Overflow */

84

#define CREG_STAT_CECOFLOW 0x00000040 /* CRC Error-counter Overflow*/

85

#define CREG_STAT_RXIRQ 0x00000020 /* Receive Interrupt */

86

#define CREG_STAT_RXDROP 0x00000010 /* Dropped a RX'd packet */

87

#define CREG_STAT_RXSMALL 0x00000008 /* Receive buffer too small */

88

#define CREG_STAT_RXLERR 0x00000004 /* Receive Late Error */

89

#define CREG_STAT_RXPERR 0x00000002 /* Receive Parity Error */

90

#define CREG_STAT_RXSERR 0x00000001 /* Receive SBUS Error ACK */

91

92

#define CREG_STAT_ERRORS (CREG_STAT_EDEFER|CREG_STAT_CLOSS|CREG_STAT_ERETRIES| \

93

CREG_STAT_LCOLL|CREG_STAT_FUFLOW|CREG_STAT_JERROR| \

94

CREG_STAT_BERROR|CREG_STAT_CCOFLOW|CREG_STAT_TXDERROR| \

95

CREG_STAT_TXLERR|CREG_STAT_TXPERR|CREG_STAT_TXSERR| \

96

CREG_STAT_RCCOFLOW|CREG_STAT_RUOFLOW|CREG_STAT_MCOFLOW| \

97

CREG_STAT_RXFOFLOW|CREG_STAT_RLCOLL|CREG_STAT_FCOFLOW| \

98

CREG_STAT_CECOFLOW|CREG_STAT_RXDROP|CREG_STAT_RXSMALL| \

99

CREG_STAT_RXLERR|CREG_STAT_RXPERR|CREG_STAT_RXSERR)

100

101

#define CREG_QMASK_COFLOW 0x00100000 /* CollCntr overflow */

102

#define CREG_QMASK_TXDERROR 0x00080000 /* TXD error */

103

#define CREG_QMASK_TXLERR 0x00040000 /* TX late error */

104

#define CREG_QMASK_TXPERR 0x00020000 /* TX parity error */

105

#define CREG_QMASK_TXSERR 0x00010000 /* TX sbus error ack */

106

#define CREG_QMASK_RXDROP 0x00000010 /* RX drop */

107

#define CREG_QMASK_RXBERROR 0x00000008 /* RX buffer error */

108

#define CREG_QMASK_RXLEERR 0x00000004 /* RX late error */

109

#define CREG_QMASK_RXPERR 0x00000002 /* RX parity error */

110

#define CREG_QMASK_RXSERR 0x00000001 /* RX sbus error ack */

111

112

#define CREG_MMASK_EDEFER 0x10000000 /* Excess defer */

113

#define CREG_MMASK_CLOSS 0x08000000 /* Carrier loss */

114

#define CREG_MMASK_ERETRY 0x04000000 /* Excess retry */

115

#define CREG_MMASK_LCOLL 0x02000000 /* Late collision error */

116

#define CREG_MMASK_UFLOW 0x01000000 /* Underflow */

117

#define CREG_MMASK_JABBER 0x00800000 /* Jabber error */

118

#define CREG_MMASK_BABBLE 0x00400000 /* Babble error */

119

#define CREG_MMASK_OFLOW 0x00000800 /* Overflow */

120

#define CREG_MMASK_RXCOLL 0x00000400 /* RX Coll-Cntr overflow */

121

#define CREG_MMASK_RPKT 0x00000200 /* Runt pkt overflow */

122

#define CREG_MMASK_MPKT 0x00000100 /* Missed pkt overflow */

123

124

#define CREG_PIPG_TENAB 0x00000020 /* Enable Throttle */

125

#define CREG_PIPG_MMODE 0x00000010 /* Manual Mode */

126

#define CREG_PIPG_WMASK 0x0000000f /* SBUS Wait Mask */

127

128

/* Per-channel AMD 79C940 MACE registers. */

129

#define MREGS_RXFIFO 0x00UL /* Receive FIFO */

130

#define MREGS_TXFIFO 0x01UL /* Transmit FIFO */

131

#define MREGS_TXFCNTL 0x02UL /* Transmit Frame Control */

132

#define MREGS_TXFSTAT 0x03UL /* Transmit Frame Status */

133

#define MREGS_TXRCNT 0x04UL /* Transmit Retry Count */

134

#define MREGS_RXFCNTL 0x05UL /* Receive Frame Control */

135

#define MREGS_RXFSTAT 0x06UL /* Receive Frame Status */

136

#define MREGS_FFCNT 0x07UL /* FIFO Frame Count */

137

#define MREGS_IREG 0x08UL /* Interrupt Register */

138

#define MREGS_IMASK 0x09UL /* Interrupt Mask */

139

#define MREGS_POLL 0x0aUL /* POLL Register */

140

#define MREGS_BCONFIG 0x0bUL /* BIU Config */

141

#define MREGS_FCONFIG 0x0cUL /* FIFO Config */

142

#define MREGS_MCONFIG 0x0dUL /* MAC Config */

143

#define MREGS_PLSCONFIG 0x0eUL /* PLS Config */

144

#define MREGS_PHYCONFIG 0x0fUL /* PHY Config */

145

#define MREGS_CHIPID1 0x10UL /* Chip-ID, low bits */

146

#define MREGS_CHIPID2 0x11UL /* Chip-ID, high bits */

147

#define MREGS_IACONFIG 0x12UL /* Internal Address Config */

148

/* 0x13UL, reserved */

149

#define MREGS_FILTER 0x14UL /* Logical Address Filter */

150

#define MREGS_ETHADDR 0x15UL /* Our Ethernet Address */

151

/* 0x16UL, reserved */

152

/* 0x17UL, reserved */

153

#define MREGS_MPCNT 0x18UL /* Missed Packet Count */

154

/* 0x19UL, reserved */

155

#define MREGS_RPCNT 0x1aUL /* Runt Packet Count */

156

#define MREGS_RCCNT 0x1bUL /* RX Collision Count */

157

/* 0x1cUL, reserved */

158

#define MREGS_UTEST 0x1dUL /* User Test */

159

#define MREGS_RTEST1 0x1eUL /* Reserved Test 1 */

160

#define MREGS_RTEST2 0x1fUL /* Reserved Test 2 */

161

#define MREGS_REG_SIZE 0x20UL

162

163

#define MREGS_TXFCNTL_DRETRY 0x80 /* Retry disable */

164

#define MREGS_TXFCNTL_DFCS 0x08 /* Disable TX FCS */

165

#define MREGS_TXFCNTL_AUTOPAD 0x01 /* TX auto pad */

166

167

#define MREGS_TXFSTAT_VALID 0x80 /* TX valid */

168

#define MREGS_TXFSTAT_UNDERFLOW 0x40 /* TX underflow */

169

#define MREGS_TXFSTAT_LCOLL 0x20 /* TX late collision */

170

#define MREGS_TXFSTAT_MRETRY 0x10 /* TX > 1 retries */

171

#define MREGS_TXFSTAT_ORETRY 0x08 /* TX 1 retry */

172

#define MREGS_TXFSTAT_PDEFER 0x04 /* TX pkt deferred */

173

#define MREGS_TXFSTAT_CLOSS 0x02 /* TX carrier lost */

174

#define MREGS_TXFSTAT_RERROR 0x01 /* TX retry error */

175

176

#define MREGS_TXRCNT_EDEFER 0x80 /* TX Excess defers */

177

#define MREGS_TXRCNT_CMASK 0x0f /* TX retry count */

178

179

#define MREGS_RXFCNTL_LOWLAT 0x08 /* RX low latency */

180

#define MREGS_RXFCNTL_AREJECT 0x04 /* RX addr match rej */

181

#define MREGS_RXFCNTL_AUTOSTRIP 0x01 /* RX auto strip */

182

183

#define MREGS_RXFSTAT_OVERFLOW 0x80 /* RX overflow */

184

#define MREGS_RXFSTAT_LCOLL 0x40 /* RX late collision */

185

#define MREGS_RXFSTAT_FERROR 0x20 /* RX framing error */

186

#define MREGS_RXFSTAT_FCSERROR 0x10 /* RX FCS error */

187

#define MREGS_RXFSTAT_RBCNT 0x0f /* RX msg byte count */

188

189

#define MREGS_FFCNT_RX 0xf0 /* RX FIFO frame cnt */

190

#define MREGS_FFCNT_TX 0x0f /* TX FIFO frame cnt */

191

192

#define MREGS_IREG_JABBER 0x80 /* IRQ Jabber error */

193

#define MREGS_IREG_BABBLE 0x40 /* IRQ Babble error */

194

#define MREGS_IREG_COLL 0x20 /* IRQ Collision error */

195

#define MREGS_IREG_RCCO 0x10 /* IRQ Collision cnt overflow */

196

#define MREGS_IREG_RPKTCO 0x08 /* IRQ Runt packet count overflow */

197

#define MREGS_IREG_MPKTCO 0x04 /* IRQ missed packet cnt overflow */

198

#define MREGS_IREG_RXIRQ 0x02 /* IRQ RX'd a packet */

199

#define MREGS_IREG_TXIRQ 0x01 /* IRQ TX'd a packet */

200

201

#define MREGS_IMASK_BABBLE 0x40 /* IMASK Babble errors */

202

#define MREGS_IMASK_COLL 0x20 /* IMASK Collision errors */

203

#define MREGS_IMASK_MPKTCO 0x04 /* IMASK Missed pkt cnt overflow */

204

#define MREGS_IMASK_RXIRQ 0x02 /* IMASK RX interrupts */

205

#define MREGS_IMASK_TXIRQ 0x01 /* IMASK TX interrupts */

206

207

#define MREGS_POLL_TXVALID 0x80 /* TX is valid */

208

#define MREGS_POLL_TDTR 0x40 /* TX data transfer request */

209

#define MREGS_POLL_RDTR 0x20 /* RX data transfer request */

210

211

#define MREGS_BCONFIG_BSWAP 0x40 /* Byte Swap */

212

#define MREGS_BCONFIG_4TS 0x00 /* 4byte transmit start point */

213

#define MREGS_BCONFIG_16TS 0x10 /* 16byte transmit start point */

214

#define MREGS_BCONFIG_64TS 0x20 /* 64byte transmit start point */

215

#define MREGS_BCONFIG_112TS 0x30 /* 112byte transmit start point */

216

#define MREGS_BCONFIG_RESET 0x01 /* SW-Reset the MACE */

217

218

#define MREGS_FCONFIG_TXF8 0x00 /* TX fifo 8 write cycles */

219

#define MREGS_FCONFIG_TXF32 0x80 /* TX fifo 32 write cycles */

220

#define MREGS_FCONFIG_TXF16 0x40 /* TX fifo 16 write cycles */

221

#define MREGS_FCONFIG_RXF64 0x20 /* RX fifo 64 write cycles */

222

#define MREGS_FCONFIG_RXF32 0x10 /* RX fifo 32 write cycles */

223

#define MREGS_FCONFIG_RXF16 0x00 /* RX fifo 16 write cycles */

224

#define MREGS_FCONFIG_TFWU 0x08 /* TX fifo watermark update */

225

#define MREGS_FCONFIG_RFWU 0x04 /* RX fifo watermark update */

226

#define MREGS_FCONFIG_TBENAB 0x02 /* TX burst enable */

227

#define MREGS_FCONFIG_RBENAB 0x01 /* RX burst enable */

228

229

#define MREGS_MCONFIG_PROMISC 0x80 /* Promiscuous mode enable */

230

#define MREGS_MCONFIG_TPDDISAB 0x40 /* TX 2part deferral enable */

231

#define MREGS_MCONFIG_MBAENAB 0x20 /* Modified backoff enable */

232

#define MREGS_MCONFIG_RPADISAB 0x08 /* RX physical addr disable */

233

#define MREGS_MCONFIG_RBDISAB 0x04 /* RX broadcast disable */

234

#define MREGS_MCONFIG_TXENAB 0x02 /* Enable transmitter */

235

#define MREGS_MCONFIG_RXENAB 0x01 /* Enable receiver */

236

237

#define MREGS_PLSCONFIG_TXMS 0x08 /* TX mode select */

238

#define MREGS_PLSCONFIG_GPSI 0x06 /* Use GPSI connector */

239

#define MREGS_PLSCONFIG_DAI 0x04 /* Use DAI connector */

240

#define MREGS_PLSCONFIG_TP 0x02 /* Use TwistedPair connector */

241

#define MREGS_PLSCONFIG_AUI 0x00 /* Use AUI connector */

242

#define MREGS_PLSCONFIG_IOENAB 0x01 /* PLS I/O enable */

243

244

#define MREGS_PHYCONFIG_LSTAT 0x80 /* Link status */

245

#define MREGS_PHYCONFIG_LTESTDIS 0x40 /* Disable link test logic */

246

#define MREGS_PHYCONFIG_RXPOLARITY 0x20 /* RX polarity */

247

#define MREGS_PHYCONFIG_APCDISAB 0x10 /* AutoPolarityCorrect disab */

248

#define MREGS_PHYCONFIG_LTENAB 0x08 /* Select low threshold */

249

#define MREGS_PHYCONFIG_AUTO 0x04 /* Connector port auto-sel */

250

#define MREGS_PHYCONFIG_RWU 0x02 /* Remote WakeUp */

251

#define MREGS_PHYCONFIG_AW 0x01 /* Auto Wakeup */

252

253

#define MREGS_IACONFIG_ACHNGE 0x80 /* Do address change */

254

#define MREGS_IACONFIG_PARESET 0x04 /* Physical address reset */

255

#define MREGS_IACONFIG_LARESET 0x02 /* Logical address reset */

256

257

#define MREGS_UTEST_RTRENAB 0x80 /* Enable resv test register */

258

#define MREGS_UTEST_RTRDISAB 0x40 /* Disab resv test register */

259

#define MREGS_UTEST_RPACCEPT 0x20 /* Accept runt packets */

260

#define MREGS_UTEST_FCOLL 0x10 /* Force collision status */

261

#define MREGS_UTEST_FCSENAB 0x08 /* Enable FCS on RX */

262

#define MREGS_UTEST_INTLOOPM 0x06 /* Intern lpback w/MENDEC */

263

#define MREGS_UTEST_INTLOOP 0x04 /* Intern lpback */

264

#define MREGS_UTEST_EXTLOOP 0x02 /* Extern lpback */

265

#define MREGS_UTEST_NOLOOP 0x00 /* No loopback */

struct qe_rxd {

u32 rx_flags;

u32 rx_addr;

};

#define RXD_OWN 0x80000000 /* Ownership. */

273

#define RXD_UPDATE 0x10000000 /* Being Updated? */

274

#define RXD_LENGTH 0x000007ff /* Packet Length. */

struct qe_txd {

u32 tx_flags;

u32 tx_addr;

};

#define TXD_OWN 0x80000000 /* Ownership. */

282

#define TXD_SOP 0x40000000 /* Start Of Packet */

283

#define TXD_EOP 0x20000000 /* End Of Packet */

284

#define TXD_UPDATE 0x10000000 /* Being Updated? */

285

#define TXD_LENGTH 0x000007ff /* Packet Length. */

286

287

#define TX_RING_MAXSIZE 256

288

#define RX_RING_MAXSIZE 256

289

290

#define TX_RING_SIZE 16

291

#define RX_RING_SIZE 16

292

293

#define NEXT_RX(num) (((num) + 1) & (RX_RING_MAXSIZE - 1))

294

#define NEXT_TX(num) (((num) + 1) & (TX_RING_MAXSIZE - 1))

295

#define PREV_RX(num) (((num) - 1) & (RX_RING_MAXSIZE - 1))

296

#define PREV_TX(num) (((num) - 1) & (TX_RING_MAXSIZE - 1))

297

298

#define TX_BUFFS_AVAIL(qp) \

299

(((qp)->tx_old <= (qp)->tx_new) ? \

300

(qp)->tx_old + (TX_RING_SIZE - 1) - (qp)->tx_new : \

301

(qp)->tx_old - (qp)->tx_new - 1)

302

303

struct qe_init_block {

304

struct qe_rxd qe_rxd[RX_RING_MAXSIZE];

305

struct qe_txd qe_txd[TX_RING_MAXSIZE];

306

};

307

308

#define qib_offset(mem, elem) \

309

((__u32)((unsigned long)(&(((struct qe_init_block *)0)->mem[elem]))))

struct sunqe;

struct sunqec {

void __iomem *gregs; /* QEC Global Registers */

315

struct sunqe *qes[4]; /* Each child MACE */

316

unsigned int qec_bursts; /* Support burst sizes */

317

struct sbus_dev *qec_sdev; /* QEC's SBUS device */

318

struct sunqec *next_module; /* List of all QECs in system */

319

};

320

321

#define PKT_BUF_SZ 1664

322

#define RXD_PKT_SZ 1664

323

324

struct sunqe_buffers {

325

u8 tx_buf[TX_RING_SIZE][PKT_BUF_SZ];

326

u8 __pad[2];

327

u8 rx_buf[RX_RING_SIZE][PKT_BUF_SZ];

328

};

329

330

#define qebuf_offset(mem, elem) \

331

((__u32)((unsigned long)(&(((struct sunqe_buffers *)0)->mem[elem][0]))))

332

333

struct sunqe {

334

void __iomem *qcregs; /* QEC per-channel Registers */

335

void __iomem *mregs; /* Per-channel MACE Registers */

336

struct qe_init_block *qe_block; /* RX and TX descriptors */

337

__u32 qblock_dvma; /* RX and TX descriptors */

338

spinlock_t lock; /* Protects txfull state */

339

int rx_new, rx_old; /* RX ring extents */

340

int tx_new, tx_old; /* TX ring extents */

341

struct sunqe_buffers *buffers; /* CPU visible address. */

342

__u32 buffers_dvma; /* DVMA visible address. */

343

struct sunqec *parent;

344

u8 mconfig; /* Base MACE mconfig value */

345

struct net_device_stats net_stats; /* Statistical counters */

346

struct sbus_dev *qe_sdev; /* QE's SBUS device struct */

347

struct net_device *dev; /* QE's netdevice struct */

348

int channel; /* Who am I? */

349

};

350

351

#endif /* !(_SUNQE_H) */