blob: 56711c25584dd06004e2046a8d7c56f49b420a85 [file] [log] [blame]
Eduardo Valentinf9df89d2014-01-06 09:04:18 -04001/*
2 * drivers/thermal/clock_cooling.c
3 *
4 * Copyright (C) 2014 Eduardo Valentin <edubezval@gmail.com>
5 *
6 * Copyright (C) 2013 Texas Instruments Inc.
7 * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
8 *
9 * Highly based on cpu_cooling.c.
10 * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
11 * Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org>
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; version 2 of the License.
16 *
17 * This program is distributed in the hope that it will be useful, but
18 * WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 * General Public License for more details.
21 */
22#include <linux/clk.h>
23#include <linux/cpufreq.h>
24#include <linux/device.h>
25#include <linux/err.h>
26#include <linux/idr.h>
27#include <linux/mutex.h>
28#include <linux/pm_opp.h>
29#include <linux/slab.h>
30#include <linux/thermal.h>
31#include <linux/clock_cooling.h>
32
33/**
34 * struct clock_cooling_device - data for cooling device with clock
35 * @id: unique integer value corresponding to each clock_cooling_device
36 * registered.
37 * @dev: struct device pointer to the device being used to cool off using
38 * clock frequencies.
39 * @cdev: thermal_cooling_device pointer to keep track of the
40 * registered cooling device.
41 * @clk_rate_change_nb: reference to notifier block used to receive clock
42 * rate changes.
43 * @freq_table: frequency table used to keep track of available frequencies.
44 * @clock_state: integer value representing the current state of clock
45 * cooling devices.
46 * @clock_val: integer value representing the absolute value of the clipped
47 * frequency.
48 * @clk: struct clk reference used to enforce clock limits.
49 * @lock: mutex lock to protect this struct.
50 *
51 * This structure is required for keeping information of each
52 * clock_cooling_device registered. In order to prevent corruption of this a
53 * mutex @lock is used.
54 */
55struct clock_cooling_device {
56 int id;
57 struct device *dev;
58 struct thermal_cooling_device *cdev;
59 struct notifier_block clk_rate_change_nb;
60 struct cpufreq_frequency_table *freq_table;
61 unsigned long clock_state;
62 unsigned long clock_val;
63 struct clk *clk;
64 struct mutex lock; /* lock to protect the content of this struct */
65};
66#define to_clock_cooling_device(x) \
67 container_of(x, struct clock_cooling_device, clk_rate_change_nb)
Matthew Wilcox7a6639d2016-12-21 09:47:04 -080068static DEFINE_IDA(clock_ida);
Eduardo Valentinf9df89d2014-01-06 09:04:18 -040069
70/* Below code defines functions to be used for clock as cooling device */
71
72enum clock_cooling_property {
73 GET_LEVEL,
74 GET_FREQ,
75 GET_MAXL,
76};
77
78/**
79 * clock_cooling_get_property - fetch a property of interest for a give cpu.
80 * @ccdev: clock cooling device reference
81 * @input: query parameter
82 * @output: query return
83 * @property: type of query (frequency, level, max level)
84 *
85 * This is the common function to
86 * 1. get maximum clock cooling states
87 * 2. translate frequency to cooling state
88 * 3. translate cooling state to frequency
89 * Note that the code may be not in good shape
90 * but it is written in this way in order to:
91 * a) reduce duplicate code as most of the code can be shared.
92 * b) make sure the logic is consistent when translating between
93 * cooling states and frequencies.
94 *
95 * Return: 0 on success, -EINVAL when invalid parameters are passed.
96 */
97static int clock_cooling_get_property(struct clock_cooling_device *ccdev,
98 unsigned long input,
99 unsigned long *output,
100 enum clock_cooling_property property)
101{
102 int i;
103 unsigned long max_level = 0, level = 0;
104 unsigned int freq = CPUFREQ_ENTRY_INVALID;
105 int descend = -1;
106 struct cpufreq_frequency_table *pos, *table = ccdev->freq_table;
107
108 if (!output)
109 return -EINVAL;
110
111 if (!table)
112 return -EINVAL;
113
114 cpufreq_for_each_valid_entry(pos, table) {
115 /* ignore duplicate entry */
116 if (freq == pos->frequency)
117 continue;
118
119 /* get the frequency order */
120 if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
121 descend = freq > pos->frequency;
122
123 freq = pos->frequency;
124 max_level++;
125 }
126
127 /* No valid cpu frequency entry */
128 if (max_level == 0)
129 return -EINVAL;
130
131 /* max_level is an index, not a counter */
132 max_level--;
133
134 /* get max level */
135 if (property == GET_MAXL) {
136 *output = max_level;
137 return 0;
138 }
139
140 if (property == GET_FREQ)
141 level = descend ? input : (max_level - input);
142
143 i = 0;
144 cpufreq_for_each_valid_entry(pos, table) {
145 /* ignore duplicate entry */
146 if (freq == pos->frequency)
147 continue;
148
149 /* now we have a valid frequency entry */
150 freq = pos->frequency;
151
152 if (property == GET_LEVEL && (unsigned int)input == freq) {
153 /* get level by frequency */
154 *output = descend ? i : (max_level - i);
155 return 0;
156 }
157 if (property == GET_FREQ && level == i) {
158 /* get frequency by level */
159 *output = freq;
160 return 0;
161 }
162 i++;
163 }
164
165 return -EINVAL;
166}
167
168/**
169 * clock_cooling_get_level - return the cooling level of given clock cooling.
170 * @cdev: reference of a thermal cooling device of used as clock cooling device
171 * @freq: the frequency of interest
172 *
173 * This function will match the cooling level corresponding to the
174 * requested @freq and return it.
175 *
176 * Return: The matched cooling level on success or THERMAL_CSTATE_INVALID
177 * otherwise.
178 */
179unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev,
180 unsigned long freq)
181{
182 struct clock_cooling_device *ccdev = cdev->devdata;
183 unsigned long val;
184
185 if (clock_cooling_get_property(ccdev, (unsigned long)freq, &val,
186 GET_LEVEL))
187 return THERMAL_CSTATE_INVALID;
188
189 return val;
190}
191EXPORT_SYMBOL_GPL(clock_cooling_get_level);
192
193/**
194 * clock_cooling_get_frequency - get the absolute value of frequency from level.
195 * @ccdev: clock cooling device reference
196 * @level: cooling level
197 *
198 * This function matches cooling level with frequency. Based on a cooling level
199 * of frequency, equals cooling state of cpu cooling device, it will return
200 * the corresponding frequency.
201 * e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc
202 *
203 * Return: 0 on error, the corresponding frequency otherwise.
204 */
205static unsigned long
206clock_cooling_get_frequency(struct clock_cooling_device *ccdev,
207 unsigned long level)
208{
209 int ret = 0;
210 unsigned long freq;
211
212 ret = clock_cooling_get_property(ccdev, level, &freq, GET_FREQ);
213 if (ret)
214 return 0;
215
216 return freq;
217}
218
219/**
220 * clock_cooling_apply - function to apply frequency clipping.
221 * @ccdev: clock_cooling_device pointer containing frequency clipping data.
222 * @cooling_state: value of the cooling state.
223 *
224 * Function used to make sure the clock layer is aware of current thermal
225 * limits. The limits are applied by updating the clock rate in case it is
226 * higher than the corresponding frequency based on the requested cooling_state.
227 *
228 * Return: 0 on success, an error code otherwise (-EINVAL in case wrong
229 * cooling state).
230 */
231static int clock_cooling_apply(struct clock_cooling_device *ccdev,
232 unsigned long cooling_state)
233{
234 unsigned long clip_freq, cur_freq;
235 int ret = 0;
236
237 /* Here we write the clipping */
238 /* Check if the old cooling action is same as new cooling action */
239 if (ccdev->clock_state == cooling_state)
240 return 0;
241
242 clip_freq = clock_cooling_get_frequency(ccdev, cooling_state);
243 if (!clip_freq)
244 return -EINVAL;
245
246 cur_freq = clk_get_rate(ccdev->clk);
247
248 mutex_lock(&ccdev->lock);
249 ccdev->clock_state = cooling_state;
250 ccdev->clock_val = clip_freq;
251 /* enforce clock level */
252 if (cur_freq > clip_freq)
253 ret = clk_set_rate(ccdev->clk, clip_freq);
254 mutex_unlock(&ccdev->lock);
255
256 return ret;
257}
258
259/**
260 * clock_cooling_clock_notifier - notifier callback on clock rate changes.
261 * @nb: struct notifier_block * with callback info.
262 * @event: value showing clock event for which this function invoked.
263 * @data: callback-specific data
264 *
265 * Callback to hijack the notification on clock transition.
266 * Every time there is a clock change, we intercept all pre change events
267 * and block the transition in case the new rate infringes thermal limits.
268 *
269 * Return: NOTIFY_DONE (success) or NOTIFY_BAD (new_rate > thermal limit).
270 */
271static int clock_cooling_clock_notifier(struct notifier_block *nb,
272 unsigned long event, void *data)
273{
274 struct clk_notifier_data *ndata = data;
275 struct clock_cooling_device *ccdev = to_clock_cooling_device(nb);
276
277 switch (event) {
278 case PRE_RATE_CHANGE:
279 /*
280 * checks on current state
281 * TODO: current method is not best we can find as it
282 * allows possibly voltage transitions, in case DVFS
283 * layer is also hijacking clock pre notifications.
284 */
285 if (ndata->new_rate > ccdev->clock_val)
286 return NOTIFY_BAD;
287 /* fall through */
288 case POST_RATE_CHANGE:
289 case ABORT_RATE_CHANGE:
290 default:
291 return NOTIFY_DONE;
292 }
293}
294
295/* clock cooling device thermal callback functions are defined below */
296
297/**
298 * clock_cooling_get_max_state - callback function to get the max cooling state.
299 * @cdev: thermal cooling device pointer.
300 * @state: fill this variable with the max cooling state.
301 *
302 * Callback for the thermal cooling device to return the clock
303 * max cooling state.
304 *
305 * Return: 0 on success, an error code otherwise.
306 */
307static int clock_cooling_get_max_state(struct thermal_cooling_device *cdev,
308 unsigned long *state)
309{
310 struct clock_cooling_device *ccdev = cdev->devdata;
311 unsigned long count = 0;
312 int ret;
313
314 ret = clock_cooling_get_property(ccdev, 0, &count, GET_MAXL);
315 if (!ret)
316 *state = count;
317
318 return ret;
319}
320
321/**
322 * clock_cooling_get_cur_state - function to get the current cooling state.
323 * @cdev: thermal cooling device pointer.
324 * @state: fill this variable with the current cooling state.
325 *
326 * Callback for the thermal cooling device to return the clock
327 * current cooling state.
328 *
329 * Return: 0 (success)
330 */
331static int clock_cooling_get_cur_state(struct thermal_cooling_device *cdev,
332 unsigned long *state)
333{
334 struct clock_cooling_device *ccdev = cdev->devdata;
335
336 *state = ccdev->clock_state;
337
338 return 0;
339}
340
341/**
342 * clock_cooling_set_cur_state - function to set the current cooling state.
343 * @cdev: thermal cooling device pointer.
344 * @state: set this variable to the current cooling state.
345 *
346 * Callback for the thermal cooling device to change the clock cooling
347 * current cooling state.
348 *
349 * Return: 0 on success, an error code otherwise.
350 */
351static int clock_cooling_set_cur_state(struct thermal_cooling_device *cdev,
352 unsigned long state)
353{
354 struct clock_cooling_device *clock_device = cdev->devdata;
355
356 return clock_cooling_apply(clock_device, state);
357}
358
359/* Bind clock callbacks to thermal cooling device ops */
360static struct thermal_cooling_device_ops const clock_cooling_ops = {
361 .get_max_state = clock_cooling_get_max_state,
362 .get_cur_state = clock_cooling_get_cur_state,
363 .set_cur_state = clock_cooling_set_cur_state,
364};
365
366/**
367 * clock_cooling_register - function to create clock cooling device.
368 * @dev: struct device pointer to the device used as clock cooling device.
369 * @clock_name: string containing the clock used as cooling mechanism.
370 *
371 * This interface function registers the clock cooling device with the name
372 * "thermal-clock-%x". The cooling device is based on clock frequencies.
373 * The struct device is assumed to be capable of DVFS transitions.
374 * The OPP layer is used to fetch and fill the available frequencies for
375 * the referred device. The ordered frequency table is used to control
376 * the clock cooling device cooling states and to limit clock transitions
377 * based on the cooling state requested by the thermal framework.
378 *
379 * Return: a valid struct thermal_cooling_device pointer on success,
380 * on failure, it returns a corresponding ERR_PTR().
381 */
382struct thermal_cooling_device *
383clock_cooling_register(struct device *dev, const char *clock_name)
384{
385 struct thermal_cooling_device *cdev;
386 struct clock_cooling_device *ccdev = NULL;
387 char dev_name[THERMAL_NAME_LENGTH];
388 int ret = 0;
389
390 ccdev = devm_kzalloc(dev, sizeof(*ccdev), GFP_KERNEL);
391 if (!ccdev)
392 return ERR_PTR(-ENOMEM);
393
Wei Yongjun165989a2016-07-25 07:01:19 +0000394 mutex_init(&ccdev->lock);
Eduardo Valentinf9df89d2014-01-06 09:04:18 -0400395 ccdev->dev = dev;
396 ccdev->clk = devm_clk_get(dev, clock_name);
397 if (IS_ERR(ccdev->clk))
398 return ERR_CAST(ccdev->clk);
399
Matthew Wilcox7a6639d2016-12-21 09:47:04 -0800400 ret = ida_simple_get(&clock_ida, 0, 0, GFP_KERNEL);
401 if (ret < 0)
402 return ERR_PTR(ret);
403 ccdev->id = ret;
Eduardo Valentinf9df89d2014-01-06 09:04:18 -0400404
405 snprintf(dev_name, sizeof(dev_name), "thermal-clock-%d", ccdev->id);
406
407 cdev = thermal_cooling_device_register(dev_name, ccdev,
408 &clock_cooling_ops);
409 if (IS_ERR(cdev)) {
Matthew Wilcox7a6639d2016-12-21 09:47:04 -0800410 ida_simple_remove(&clock_ida, ccdev->id);
Eduardo Valentinf9df89d2014-01-06 09:04:18 -0400411 return ERR_PTR(-EINVAL);
412 }
413 ccdev->cdev = cdev;
414 ccdev->clk_rate_change_nb.notifier_call = clock_cooling_clock_notifier;
415
416 /* Assuming someone has already filled the opp table for this device */
417 ret = dev_pm_opp_init_cpufreq_table(dev, &ccdev->freq_table);
418 if (ret) {
Matthew Wilcox7a6639d2016-12-21 09:47:04 -0800419 ida_simple_remove(&clock_ida, ccdev->id);
Eduardo Valentinf9df89d2014-01-06 09:04:18 -0400420 return ERR_PTR(ret);
421 }
422 ccdev->clock_state = 0;
423 ccdev->clock_val = clock_cooling_get_frequency(ccdev, 0);
424
425 clk_notifier_register(ccdev->clk, &ccdev->clk_rate_change_nb);
426
427 return cdev;
428}
429EXPORT_SYMBOL_GPL(clock_cooling_register);
430
431/**
432 * clock_cooling_unregister - function to remove clock cooling device.
433 * @cdev: thermal cooling device pointer.
434 *
435 * This interface function unregisters the "thermal-clock-%x" cooling device.
436 */
437void clock_cooling_unregister(struct thermal_cooling_device *cdev)
438{
439 struct clock_cooling_device *ccdev;
440
441 if (!cdev)
442 return;
443
444 ccdev = cdev->devdata;
445
446 clk_notifier_unregister(ccdev->clk, &ccdev->clk_rate_change_nb);
447 dev_pm_opp_free_cpufreq_table(ccdev->dev, &ccdev->freq_table);
448
449 thermal_cooling_device_unregister(ccdev->cdev);
Matthew Wilcox7a6639d2016-12-21 09:47:04 -0800450 ida_simple_remove(&clock_ida, ccdev->id);
Eduardo Valentinf9df89d2014-01-06 09:04:18 -0400451}
452EXPORT_SYMBOL_GPL(clock_cooling_unregister);