Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * linux/sound/oss/dmasound/dmasound_atari.c |
| 3 | * |
| 4 | * Atari TT and Falcon DMA Sound Driver |
| 5 | * |
| 6 | * See linux/sound/oss/dmasound/dmasound_core.c for copyright and credits |
| 7 | * prior to 28/01/2001 |
| 8 | * |
| 9 | * 28/01/2001 [0.1] Iain Sandoe |
| 10 | * - added versioning |
| 11 | * - put in and populated the hardware_afmts field. |
| 12 | * [0.2] - put in SNDCTL_DSP_GETCAPS value. |
| 13 | * 01/02/2001 [0.3] - put in default hard/soft settings. |
| 14 | */ |
| 15 | |
| 16 | |
| 17 | #include <linux/module.h> |
| 18 | #include <linux/kernel.h> |
| 19 | #include <linux/init.h> |
| 20 | #include <linux/soundcard.h> |
| 21 | #include <linux/mm.h> |
| 22 | #include <linux/spinlock.h> |
| 23 | #include <linux/interrupt.h> |
| 24 | |
| 25 | #include <asm/uaccess.h> |
| 26 | #include <asm/atariints.h> |
| 27 | #include <asm/atari_stram.h> |
| 28 | |
| 29 | #include "dmasound.h" |
| 30 | |
| 31 | #define DMASOUND_ATARI_REVISION 0 |
| 32 | #define DMASOUND_ATARI_EDITION 3 |
| 33 | |
| 34 | extern void atari_microwire_cmd(int cmd); |
| 35 | |
| 36 | static int is_falcon; |
| 37 | static int write_sq_ignore_int; /* ++TeSche: used for Falcon */ |
| 38 | |
| 39 | static int expand_bal; /* Balance factor for expanding (not volume!) */ |
| 40 | static int expand_data; /* Data for expanding */ |
| 41 | |
| 42 | |
| 43 | /*** Translations ************************************************************/ |
| 44 | |
| 45 | |
| 46 | /* ++TeSche: radically changed for new expanding purposes... |
| 47 | * |
| 48 | * These two routines now deal with copying/expanding/translating the samples |
| 49 | * from user space into our buffer at the right frequency. They take care about |
| 50 | * how much data there's actually to read, how much buffer space there is and |
| 51 | * to convert samples into the right frequency/encoding. They will only work on |
| 52 | * complete samples so it may happen they leave some bytes in the input stream |
| 53 | * if the user didn't write a multiple of the current sample size. They both |
| 54 | * return the number of bytes they've used from both streams so you may detect |
| 55 | * such a situation. Luckily all programs should be able to cope with that. |
| 56 | * |
| 57 | * I think I've optimized anything as far as one can do in plain C, all |
| 58 | * variables should fit in registers and the loops are really short. There's |
| 59 | * one loop for every possible situation. Writing a more generalized and thus |
| 60 | * parameterized loop would only produce slower code. Feel free to optimize |
| 61 | * this in assembler if you like. :) |
| 62 | * |
| 63 | * I think these routines belong here because they're not yet really hardware |
| 64 | * independent, especially the fact that the Falcon can play 16bit samples |
| 65 | * only in stereo is hardcoded in both of them! |
| 66 | * |
| 67 | * ++geert: split in even more functions (one per format) |
| 68 | */ |
| 69 | |
| 70 | static ssize_t ata_ct_law(const u_char *userPtr, size_t userCount, |
| 71 | u_char frame[], ssize_t *frameUsed, |
| 72 | ssize_t frameLeft); |
| 73 | static ssize_t ata_ct_s8(const u_char *userPtr, size_t userCount, |
| 74 | u_char frame[], ssize_t *frameUsed, |
| 75 | ssize_t frameLeft); |
| 76 | static ssize_t ata_ct_u8(const u_char *userPtr, size_t userCount, |
| 77 | u_char frame[], ssize_t *frameUsed, |
| 78 | ssize_t frameLeft); |
| 79 | static ssize_t ata_ct_s16be(const u_char *userPtr, size_t userCount, |
| 80 | u_char frame[], ssize_t *frameUsed, |
| 81 | ssize_t frameLeft); |
| 82 | static ssize_t ata_ct_u16be(const u_char *userPtr, size_t userCount, |
| 83 | u_char frame[], ssize_t *frameUsed, |
| 84 | ssize_t frameLeft); |
| 85 | static ssize_t ata_ct_s16le(const u_char *userPtr, size_t userCount, |
| 86 | u_char frame[], ssize_t *frameUsed, |
| 87 | ssize_t frameLeft); |
| 88 | static ssize_t ata_ct_u16le(const u_char *userPtr, size_t userCount, |
| 89 | u_char frame[], ssize_t *frameUsed, |
| 90 | ssize_t frameLeft); |
| 91 | static ssize_t ata_ctx_law(const u_char *userPtr, size_t userCount, |
| 92 | u_char frame[], ssize_t *frameUsed, |
| 93 | ssize_t frameLeft); |
| 94 | static ssize_t ata_ctx_s8(const u_char *userPtr, size_t userCount, |
| 95 | u_char frame[], ssize_t *frameUsed, |
| 96 | ssize_t frameLeft); |
| 97 | static ssize_t ata_ctx_u8(const u_char *userPtr, size_t userCount, |
| 98 | u_char frame[], ssize_t *frameUsed, |
| 99 | ssize_t frameLeft); |
| 100 | static ssize_t ata_ctx_s16be(const u_char *userPtr, size_t userCount, |
| 101 | u_char frame[], ssize_t *frameUsed, |
| 102 | ssize_t frameLeft); |
| 103 | static ssize_t ata_ctx_u16be(const u_char *userPtr, size_t userCount, |
| 104 | u_char frame[], ssize_t *frameUsed, |
| 105 | ssize_t frameLeft); |
| 106 | static ssize_t ata_ctx_s16le(const u_char *userPtr, size_t userCount, |
| 107 | u_char frame[], ssize_t *frameUsed, |
| 108 | ssize_t frameLeft); |
| 109 | static ssize_t ata_ctx_u16le(const u_char *userPtr, size_t userCount, |
| 110 | u_char frame[], ssize_t *frameUsed, |
| 111 | ssize_t frameLeft); |
| 112 | |
| 113 | |
| 114 | /*** Low level stuff *********************************************************/ |
| 115 | |
| 116 | |
Al Viro | 1ef64e6 | 2005-10-21 03:22:18 -0400 | [diff] [blame^] | 117 | static void *AtaAlloc(unsigned int size, gfp_t flags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 118 | static void AtaFree(void *, unsigned int size); |
| 119 | static int AtaIrqInit(void); |
| 120 | #ifdef MODULE |
| 121 | static void AtaIrqCleanUp(void); |
| 122 | #endif /* MODULE */ |
| 123 | static int AtaSetBass(int bass); |
| 124 | static int AtaSetTreble(int treble); |
| 125 | static void TTSilence(void); |
| 126 | static void TTInit(void); |
| 127 | static int TTSetFormat(int format); |
| 128 | static int TTSetVolume(int volume); |
| 129 | static int TTSetGain(int gain); |
| 130 | static void FalconSilence(void); |
| 131 | static void FalconInit(void); |
| 132 | static int FalconSetFormat(int format); |
| 133 | static int FalconSetVolume(int volume); |
| 134 | static void AtaPlayNextFrame(int index); |
| 135 | static void AtaPlay(void); |
| 136 | static irqreturn_t AtaInterrupt(int irq, void *dummy, struct pt_regs *fp); |
| 137 | |
| 138 | /*** Mid level stuff *********************************************************/ |
| 139 | |
| 140 | static void TTMixerInit(void); |
| 141 | static void FalconMixerInit(void); |
| 142 | static int AtaMixerIoctl(u_int cmd, u_long arg); |
| 143 | static int TTMixerIoctl(u_int cmd, u_long arg); |
| 144 | static int FalconMixerIoctl(u_int cmd, u_long arg); |
| 145 | static int AtaWriteSqSetup(void); |
| 146 | static int AtaSqOpen(mode_t mode); |
| 147 | static int TTStateInfo(char *buffer, size_t space); |
| 148 | static int FalconStateInfo(char *buffer, size_t space); |
| 149 | |
| 150 | |
| 151 | /*** Translations ************************************************************/ |
| 152 | |
| 153 | |
| 154 | static ssize_t ata_ct_law(const u_char *userPtr, size_t userCount, |
| 155 | u_char frame[], ssize_t *frameUsed, |
| 156 | ssize_t frameLeft) |
| 157 | { |
| 158 | char *table = dmasound.soft.format == AFMT_MU_LAW ? dmasound_ulaw2dma8 |
| 159 | : dmasound_alaw2dma8; |
| 160 | ssize_t count, used; |
| 161 | u_char *p = &frame[*frameUsed]; |
| 162 | |
| 163 | count = min_t(unsigned long, userCount, frameLeft); |
| 164 | if (dmasound.soft.stereo) |
| 165 | count &= ~1; |
| 166 | used = count; |
| 167 | while (count > 0) { |
| 168 | u_char data; |
| 169 | if (get_user(data, userPtr++)) |
| 170 | return -EFAULT; |
| 171 | *p++ = table[data]; |
| 172 | count--; |
| 173 | } |
| 174 | *frameUsed += used; |
| 175 | return used; |
| 176 | } |
| 177 | |
| 178 | |
| 179 | static ssize_t ata_ct_s8(const u_char *userPtr, size_t userCount, |
| 180 | u_char frame[], ssize_t *frameUsed, |
| 181 | ssize_t frameLeft) |
| 182 | { |
| 183 | ssize_t count, used; |
| 184 | void *p = &frame[*frameUsed]; |
| 185 | |
| 186 | count = min_t(unsigned long, userCount, frameLeft); |
| 187 | if (dmasound.soft.stereo) |
| 188 | count &= ~1; |
| 189 | used = count; |
| 190 | if (copy_from_user(p, userPtr, count)) |
| 191 | return -EFAULT; |
| 192 | *frameUsed += used; |
| 193 | return used; |
| 194 | } |
| 195 | |
| 196 | |
| 197 | static ssize_t ata_ct_u8(const u_char *userPtr, size_t userCount, |
| 198 | u_char frame[], ssize_t *frameUsed, |
| 199 | ssize_t frameLeft) |
| 200 | { |
| 201 | ssize_t count, used; |
| 202 | |
| 203 | if (!dmasound.soft.stereo) { |
| 204 | u_char *p = &frame[*frameUsed]; |
| 205 | count = min_t(unsigned long, userCount, frameLeft); |
| 206 | used = count; |
| 207 | while (count > 0) { |
| 208 | u_char data; |
| 209 | if (get_user(data, userPtr++)) |
| 210 | return -EFAULT; |
| 211 | *p++ = data ^ 0x80; |
| 212 | count--; |
| 213 | } |
| 214 | } else { |
| 215 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 216 | count = min_t(unsigned long, userCount, frameLeft)>>1; |
| 217 | used = count*2; |
| 218 | while (count > 0) { |
| 219 | u_short data; |
| 220 | if (get_user(data, ((u_short *)userPtr)++)) |
| 221 | return -EFAULT; |
| 222 | *p++ = data ^ 0x8080; |
| 223 | count--; |
| 224 | } |
| 225 | } |
| 226 | *frameUsed += used; |
| 227 | return used; |
| 228 | } |
| 229 | |
| 230 | |
| 231 | static ssize_t ata_ct_s16be(const u_char *userPtr, size_t userCount, |
| 232 | u_char frame[], ssize_t *frameUsed, |
| 233 | ssize_t frameLeft) |
| 234 | { |
| 235 | ssize_t count, used; |
| 236 | |
| 237 | if (!dmasound.soft.stereo) { |
| 238 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 239 | count = min_t(unsigned long, userCount, frameLeft)>>1; |
| 240 | used = count*2; |
| 241 | while (count > 0) { |
| 242 | u_short data; |
| 243 | if (get_user(data, ((u_short *)userPtr)++)) |
| 244 | return -EFAULT; |
| 245 | *p++ = data; |
| 246 | *p++ = data; |
| 247 | count--; |
| 248 | } |
| 249 | *frameUsed += used*2; |
| 250 | } else { |
| 251 | void *p = (u_short *)&frame[*frameUsed]; |
| 252 | count = min_t(unsigned long, userCount, frameLeft) & ~3; |
| 253 | used = count; |
| 254 | if (copy_from_user(p, userPtr, count)) |
| 255 | return -EFAULT; |
| 256 | *frameUsed += used; |
| 257 | } |
| 258 | return used; |
| 259 | } |
| 260 | |
| 261 | |
| 262 | static ssize_t ata_ct_u16be(const u_char *userPtr, size_t userCount, |
| 263 | u_char frame[], ssize_t *frameUsed, |
| 264 | ssize_t frameLeft) |
| 265 | { |
| 266 | ssize_t count, used; |
| 267 | |
| 268 | if (!dmasound.soft.stereo) { |
| 269 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 270 | count = min_t(unsigned long, userCount, frameLeft)>>1; |
| 271 | used = count*2; |
| 272 | while (count > 0) { |
| 273 | u_short data; |
| 274 | if (get_user(data, ((u_short *)userPtr)++)) |
| 275 | return -EFAULT; |
| 276 | data ^= 0x8000; |
| 277 | *p++ = data; |
| 278 | *p++ = data; |
| 279 | count--; |
| 280 | } |
| 281 | *frameUsed += used*2; |
| 282 | } else { |
| 283 | u_long *p = (u_long *)&frame[*frameUsed]; |
| 284 | count = min_t(unsigned long, userCount, frameLeft)>>2; |
| 285 | used = count*4; |
| 286 | while (count > 0) { |
| 287 | u_long data; |
| 288 | if (get_user(data, ((u_int *)userPtr)++)) |
| 289 | return -EFAULT; |
| 290 | *p++ = data ^ 0x80008000; |
| 291 | count--; |
| 292 | } |
| 293 | *frameUsed += used; |
| 294 | } |
| 295 | return used; |
| 296 | } |
| 297 | |
| 298 | |
| 299 | static ssize_t ata_ct_s16le(const u_char *userPtr, size_t userCount, |
| 300 | u_char frame[], ssize_t *frameUsed, |
| 301 | ssize_t frameLeft) |
| 302 | { |
| 303 | ssize_t count, used; |
| 304 | |
| 305 | count = frameLeft; |
| 306 | if (!dmasound.soft.stereo) { |
| 307 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 308 | count = min_t(unsigned long, userCount, frameLeft)>>1; |
| 309 | used = count*2; |
| 310 | while (count > 0) { |
| 311 | u_short data; |
| 312 | if (get_user(data, ((u_short *)userPtr)++)) |
| 313 | return -EFAULT; |
| 314 | data = le2be16(data); |
| 315 | *p++ = data; |
| 316 | *p++ = data; |
| 317 | count--; |
| 318 | } |
| 319 | *frameUsed += used*2; |
| 320 | } else { |
| 321 | u_long *p = (u_long *)&frame[*frameUsed]; |
| 322 | count = min_t(unsigned long, userCount, frameLeft)>>2; |
| 323 | used = count*4; |
| 324 | while (count > 0) { |
| 325 | u_long data; |
| 326 | if (get_user(data, ((u_int *)userPtr)++)) |
| 327 | return -EFAULT; |
| 328 | data = le2be16dbl(data); |
| 329 | *p++ = data; |
| 330 | count--; |
| 331 | } |
| 332 | *frameUsed += used; |
| 333 | } |
| 334 | return used; |
| 335 | } |
| 336 | |
| 337 | |
| 338 | static ssize_t ata_ct_u16le(const u_char *userPtr, size_t userCount, |
| 339 | u_char frame[], ssize_t *frameUsed, |
| 340 | ssize_t frameLeft) |
| 341 | { |
| 342 | ssize_t count, used; |
| 343 | |
| 344 | count = frameLeft; |
| 345 | if (!dmasound.soft.stereo) { |
| 346 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 347 | count = min_t(unsigned long, userCount, frameLeft)>>1; |
| 348 | used = count*2; |
| 349 | while (count > 0) { |
| 350 | u_short data; |
| 351 | if (get_user(data, ((u_short *)userPtr)++)) |
| 352 | return -EFAULT; |
| 353 | data = le2be16(data) ^ 0x8000; |
| 354 | *p++ = data; |
| 355 | *p++ = data; |
| 356 | } |
| 357 | *frameUsed += used*2; |
| 358 | } else { |
| 359 | u_long *p = (u_long *)&frame[*frameUsed]; |
| 360 | count = min_t(unsigned long, userCount, frameLeft)>>2; |
| 361 | used = count; |
| 362 | while (count > 0) { |
| 363 | u_long data; |
| 364 | if (get_user(data, ((u_int *)userPtr)++)) |
| 365 | return -EFAULT; |
| 366 | data = le2be16dbl(data) ^ 0x80008000; |
| 367 | *p++ = data; |
| 368 | count--; |
| 369 | } |
| 370 | *frameUsed += used; |
| 371 | } |
| 372 | return used; |
| 373 | } |
| 374 | |
| 375 | |
| 376 | static ssize_t ata_ctx_law(const u_char *userPtr, size_t userCount, |
| 377 | u_char frame[], ssize_t *frameUsed, |
| 378 | ssize_t frameLeft) |
| 379 | { |
| 380 | char *table = dmasound.soft.format == AFMT_MU_LAW ? dmasound_ulaw2dma8 |
| 381 | : dmasound_alaw2dma8; |
| 382 | /* this should help gcc to stuff everything into registers */ |
| 383 | long bal = expand_bal; |
| 384 | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| 385 | ssize_t used, usedf; |
| 386 | |
| 387 | used = userCount; |
| 388 | usedf = frameLeft; |
| 389 | if (!dmasound.soft.stereo) { |
| 390 | u_char *p = &frame[*frameUsed]; |
| 391 | u_char data = expand_data; |
| 392 | while (frameLeft) { |
| 393 | u_char c; |
| 394 | if (bal < 0) { |
| 395 | if (!userCount) |
| 396 | break; |
| 397 | if (get_user(c, userPtr++)) |
| 398 | return -EFAULT; |
| 399 | data = table[c]; |
| 400 | userCount--; |
| 401 | bal += hSpeed; |
| 402 | } |
| 403 | *p++ = data; |
| 404 | frameLeft--; |
| 405 | bal -= sSpeed; |
| 406 | } |
| 407 | expand_data = data; |
| 408 | } else { |
| 409 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 410 | u_short data = expand_data; |
| 411 | while (frameLeft >= 2) { |
| 412 | u_char c; |
| 413 | if (bal < 0) { |
| 414 | if (userCount < 2) |
| 415 | break; |
| 416 | if (get_user(c, userPtr++)) |
| 417 | return -EFAULT; |
| 418 | data = table[c] << 8; |
| 419 | if (get_user(c, userPtr++)) |
| 420 | return -EFAULT; |
| 421 | data |= table[c]; |
| 422 | userCount -= 2; |
| 423 | bal += hSpeed; |
| 424 | } |
| 425 | *p++ = data; |
| 426 | frameLeft -= 2; |
| 427 | bal -= sSpeed; |
| 428 | } |
| 429 | expand_data = data; |
| 430 | } |
| 431 | expand_bal = bal; |
| 432 | used -= userCount; |
| 433 | *frameUsed += usedf-frameLeft; |
| 434 | return used; |
| 435 | } |
| 436 | |
| 437 | |
| 438 | static ssize_t ata_ctx_s8(const u_char *userPtr, size_t userCount, |
| 439 | u_char frame[], ssize_t *frameUsed, |
| 440 | ssize_t frameLeft) |
| 441 | { |
| 442 | /* this should help gcc to stuff everything into registers */ |
| 443 | long bal = expand_bal; |
| 444 | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| 445 | ssize_t used, usedf; |
| 446 | |
| 447 | used = userCount; |
| 448 | usedf = frameLeft; |
| 449 | if (!dmasound.soft.stereo) { |
| 450 | u_char *p = &frame[*frameUsed]; |
| 451 | u_char data = expand_data; |
| 452 | while (frameLeft) { |
| 453 | if (bal < 0) { |
| 454 | if (!userCount) |
| 455 | break; |
| 456 | if (get_user(data, userPtr++)) |
| 457 | return -EFAULT; |
| 458 | userCount--; |
| 459 | bal += hSpeed; |
| 460 | } |
| 461 | *p++ = data; |
| 462 | frameLeft--; |
| 463 | bal -= sSpeed; |
| 464 | } |
| 465 | expand_data = data; |
| 466 | } else { |
| 467 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 468 | u_short data = expand_data; |
| 469 | while (frameLeft >= 2) { |
| 470 | if (bal < 0) { |
| 471 | if (userCount < 2) |
| 472 | break; |
| 473 | if (get_user(data, ((u_short *)userPtr)++)) |
| 474 | return -EFAULT; |
| 475 | userCount -= 2; |
| 476 | bal += hSpeed; |
| 477 | } |
| 478 | *p++ = data; |
| 479 | frameLeft -= 2; |
| 480 | bal -= sSpeed; |
| 481 | } |
| 482 | expand_data = data; |
| 483 | } |
| 484 | expand_bal = bal; |
| 485 | used -= userCount; |
| 486 | *frameUsed += usedf-frameLeft; |
| 487 | return used; |
| 488 | } |
| 489 | |
| 490 | |
| 491 | static ssize_t ata_ctx_u8(const u_char *userPtr, size_t userCount, |
| 492 | u_char frame[], ssize_t *frameUsed, |
| 493 | ssize_t frameLeft) |
| 494 | { |
| 495 | /* this should help gcc to stuff everything into registers */ |
| 496 | long bal = expand_bal; |
| 497 | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| 498 | ssize_t used, usedf; |
| 499 | |
| 500 | used = userCount; |
| 501 | usedf = frameLeft; |
| 502 | if (!dmasound.soft.stereo) { |
| 503 | u_char *p = &frame[*frameUsed]; |
| 504 | u_char data = expand_data; |
| 505 | while (frameLeft) { |
| 506 | if (bal < 0) { |
| 507 | if (!userCount) |
| 508 | break; |
| 509 | if (get_user(data, userPtr++)) |
| 510 | return -EFAULT; |
| 511 | data ^= 0x80; |
| 512 | userCount--; |
| 513 | bal += hSpeed; |
| 514 | } |
| 515 | *p++ = data; |
| 516 | frameLeft--; |
| 517 | bal -= sSpeed; |
| 518 | } |
| 519 | expand_data = data; |
| 520 | } else { |
| 521 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 522 | u_short data = expand_data; |
| 523 | while (frameLeft >= 2) { |
| 524 | if (bal < 0) { |
| 525 | if (userCount < 2) |
| 526 | break; |
| 527 | if (get_user(data, ((u_short *)userPtr)++)) |
| 528 | return -EFAULT; |
| 529 | data ^= 0x8080; |
| 530 | userCount -= 2; |
| 531 | bal += hSpeed; |
| 532 | } |
| 533 | *p++ = data; |
| 534 | frameLeft -= 2; |
| 535 | bal -= sSpeed; |
| 536 | } |
| 537 | expand_data = data; |
| 538 | } |
| 539 | expand_bal = bal; |
| 540 | used -= userCount; |
| 541 | *frameUsed += usedf-frameLeft; |
| 542 | return used; |
| 543 | } |
| 544 | |
| 545 | |
| 546 | static ssize_t ata_ctx_s16be(const u_char *userPtr, size_t userCount, |
| 547 | u_char frame[], ssize_t *frameUsed, |
| 548 | ssize_t frameLeft) |
| 549 | { |
| 550 | /* this should help gcc to stuff everything into registers */ |
| 551 | long bal = expand_bal; |
| 552 | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| 553 | ssize_t used, usedf; |
| 554 | |
| 555 | used = userCount; |
| 556 | usedf = frameLeft; |
| 557 | if (!dmasound.soft.stereo) { |
| 558 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 559 | u_short data = expand_data; |
| 560 | while (frameLeft >= 4) { |
| 561 | if (bal < 0) { |
| 562 | if (userCount < 2) |
| 563 | break; |
| 564 | if (get_user(data, ((u_short *)userPtr)++)) |
| 565 | return -EFAULT; |
| 566 | userCount -= 2; |
| 567 | bal += hSpeed; |
| 568 | } |
| 569 | *p++ = data; |
| 570 | *p++ = data; |
| 571 | frameLeft -= 4; |
| 572 | bal -= sSpeed; |
| 573 | } |
| 574 | expand_data = data; |
| 575 | } else { |
| 576 | u_long *p = (u_long *)&frame[*frameUsed]; |
| 577 | u_long data = expand_data; |
| 578 | while (frameLeft >= 4) { |
| 579 | if (bal < 0) { |
| 580 | if (userCount < 4) |
| 581 | break; |
| 582 | if (get_user(data, ((u_int *)userPtr)++)) |
| 583 | return -EFAULT; |
| 584 | userCount -= 4; |
| 585 | bal += hSpeed; |
| 586 | } |
| 587 | *p++ = data; |
| 588 | frameLeft -= 4; |
| 589 | bal -= sSpeed; |
| 590 | } |
| 591 | expand_data = data; |
| 592 | } |
| 593 | expand_bal = bal; |
| 594 | used -= userCount; |
| 595 | *frameUsed += usedf-frameLeft; |
| 596 | return used; |
| 597 | } |
| 598 | |
| 599 | |
| 600 | static ssize_t ata_ctx_u16be(const u_char *userPtr, size_t userCount, |
| 601 | u_char frame[], ssize_t *frameUsed, |
| 602 | ssize_t frameLeft) |
| 603 | { |
| 604 | /* this should help gcc to stuff everything into registers */ |
| 605 | long bal = expand_bal; |
| 606 | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| 607 | ssize_t used, usedf; |
| 608 | |
| 609 | used = userCount; |
| 610 | usedf = frameLeft; |
| 611 | if (!dmasound.soft.stereo) { |
| 612 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 613 | u_short data = expand_data; |
| 614 | while (frameLeft >= 4) { |
| 615 | if (bal < 0) { |
| 616 | if (userCount < 2) |
| 617 | break; |
| 618 | if (get_user(data, ((u_short *)userPtr)++)) |
| 619 | return -EFAULT; |
| 620 | data ^= 0x8000; |
| 621 | userCount -= 2; |
| 622 | bal += hSpeed; |
| 623 | } |
| 624 | *p++ = data; |
| 625 | *p++ = data; |
| 626 | frameLeft -= 4; |
| 627 | bal -= sSpeed; |
| 628 | } |
| 629 | expand_data = data; |
| 630 | } else { |
| 631 | u_long *p = (u_long *)&frame[*frameUsed]; |
| 632 | u_long data = expand_data; |
| 633 | while (frameLeft >= 4) { |
| 634 | if (bal < 0) { |
| 635 | if (userCount < 4) |
| 636 | break; |
| 637 | if (get_user(data, ((u_int *)userPtr)++)) |
| 638 | return -EFAULT; |
| 639 | data ^= 0x80008000; |
| 640 | userCount -= 4; |
| 641 | bal += hSpeed; |
| 642 | } |
| 643 | *p++ = data; |
| 644 | frameLeft -= 4; |
| 645 | bal -= sSpeed; |
| 646 | } |
| 647 | expand_data = data; |
| 648 | } |
| 649 | expand_bal = bal; |
| 650 | used -= userCount; |
| 651 | *frameUsed += usedf-frameLeft; |
| 652 | return used; |
| 653 | } |
| 654 | |
| 655 | |
| 656 | static ssize_t ata_ctx_s16le(const u_char *userPtr, size_t userCount, |
| 657 | u_char frame[], ssize_t *frameUsed, |
| 658 | ssize_t frameLeft) |
| 659 | { |
| 660 | /* this should help gcc to stuff everything into registers */ |
| 661 | long bal = expand_bal; |
| 662 | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| 663 | ssize_t used, usedf; |
| 664 | |
| 665 | used = userCount; |
| 666 | usedf = frameLeft; |
| 667 | if (!dmasound.soft.stereo) { |
| 668 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 669 | u_short data = expand_data; |
| 670 | while (frameLeft >= 4) { |
| 671 | if (bal < 0) { |
| 672 | if (userCount < 2) |
| 673 | break; |
| 674 | if (get_user(data, ((u_short *)userPtr)++)) |
| 675 | return -EFAULT; |
| 676 | data = le2be16(data); |
| 677 | userCount -= 2; |
| 678 | bal += hSpeed; |
| 679 | } |
| 680 | *p++ = data; |
| 681 | *p++ = data; |
| 682 | frameLeft -= 4; |
| 683 | bal -= sSpeed; |
| 684 | } |
| 685 | expand_data = data; |
| 686 | } else { |
| 687 | u_long *p = (u_long *)&frame[*frameUsed]; |
| 688 | u_long data = expand_data; |
| 689 | while (frameLeft >= 4) { |
| 690 | if (bal < 0) { |
| 691 | if (userCount < 4) |
| 692 | break; |
| 693 | if (get_user(data, ((u_int *)userPtr)++)) |
| 694 | return -EFAULT; |
| 695 | data = le2be16dbl(data); |
| 696 | userCount -= 4; |
| 697 | bal += hSpeed; |
| 698 | } |
| 699 | *p++ = data; |
| 700 | frameLeft -= 4; |
| 701 | bal -= sSpeed; |
| 702 | } |
| 703 | expand_data = data; |
| 704 | } |
| 705 | expand_bal = bal; |
| 706 | used -= userCount; |
| 707 | *frameUsed += usedf-frameLeft; |
| 708 | return used; |
| 709 | } |
| 710 | |
| 711 | |
| 712 | static ssize_t ata_ctx_u16le(const u_char *userPtr, size_t userCount, |
| 713 | u_char frame[], ssize_t *frameUsed, |
| 714 | ssize_t frameLeft) |
| 715 | { |
| 716 | /* this should help gcc to stuff everything into registers */ |
| 717 | long bal = expand_bal; |
| 718 | long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; |
| 719 | ssize_t used, usedf; |
| 720 | |
| 721 | used = userCount; |
| 722 | usedf = frameLeft; |
| 723 | if (!dmasound.soft.stereo) { |
| 724 | u_short *p = (u_short *)&frame[*frameUsed]; |
| 725 | u_short data = expand_data; |
| 726 | while (frameLeft >= 4) { |
| 727 | if (bal < 0) { |
| 728 | if (userCount < 2) |
| 729 | break; |
| 730 | if (get_user(data, ((u_short *)userPtr)++)) |
| 731 | return -EFAULT; |
| 732 | data = le2be16(data) ^ 0x8000; |
| 733 | userCount -= 2; |
| 734 | bal += hSpeed; |
| 735 | } |
| 736 | *p++ = data; |
| 737 | *p++ = data; |
| 738 | frameLeft -= 4; |
| 739 | bal -= sSpeed; |
| 740 | } |
| 741 | expand_data = data; |
| 742 | } else { |
| 743 | u_long *p = (u_long *)&frame[*frameUsed]; |
| 744 | u_long data = expand_data; |
| 745 | while (frameLeft >= 4) { |
| 746 | if (bal < 0) { |
| 747 | if (userCount < 4) |
| 748 | break; |
| 749 | if (get_user(data, ((u_int *)userPtr)++)) |
| 750 | return -EFAULT; |
| 751 | data = le2be16dbl(data) ^ 0x80008000; |
| 752 | userCount -= 4; |
| 753 | bal += hSpeed; |
| 754 | } |
| 755 | *p++ = data; |
| 756 | frameLeft -= 4; |
| 757 | bal -= sSpeed; |
| 758 | } |
| 759 | expand_data = data; |
| 760 | } |
| 761 | expand_bal = bal; |
| 762 | used -= userCount; |
| 763 | *frameUsed += usedf-frameLeft; |
| 764 | return used; |
| 765 | } |
| 766 | |
| 767 | |
| 768 | static TRANS transTTNormal = { |
| 769 | .ct_ulaw = ata_ct_law, |
| 770 | .ct_alaw = ata_ct_law, |
| 771 | .ct_s8 = ata_ct_s8, |
| 772 | .ct_u8 = ata_ct_u8, |
| 773 | }; |
| 774 | |
| 775 | static TRANS transTTExpanding = { |
| 776 | .ct_ulaw = ata_ctx_law, |
| 777 | .ct_alaw = ata_ctx_law, |
| 778 | .ct_s8 = ata_ctx_s8, |
| 779 | .ct_u8 = ata_ctx_u8, |
| 780 | }; |
| 781 | |
| 782 | static TRANS transFalconNormal = { |
| 783 | .ct_ulaw = ata_ct_law, |
| 784 | .ct_alaw = ata_ct_law, |
| 785 | .ct_s8 = ata_ct_s8, |
| 786 | .ct_u8 = ata_ct_u8, |
| 787 | .ct_s16be = ata_ct_s16be, |
| 788 | .ct_u16be = ata_ct_u16be, |
| 789 | .ct_s16le = ata_ct_s16le, |
| 790 | .ct_u16le = ata_ct_u16le |
| 791 | }; |
| 792 | |
| 793 | static TRANS transFalconExpanding = { |
| 794 | .ct_ulaw = ata_ctx_law, |
| 795 | .ct_alaw = ata_ctx_law, |
| 796 | .ct_s8 = ata_ctx_s8, |
| 797 | .ct_u8 = ata_ctx_u8, |
| 798 | .ct_s16be = ata_ctx_s16be, |
| 799 | .ct_u16be = ata_ctx_u16be, |
| 800 | .ct_s16le = ata_ctx_s16le, |
| 801 | .ct_u16le = ata_ctx_u16le, |
| 802 | }; |
| 803 | |
| 804 | |
| 805 | /*** Low level stuff *********************************************************/ |
| 806 | |
| 807 | |
| 808 | |
| 809 | /* |
| 810 | * Atari (TT/Falcon) |
| 811 | */ |
| 812 | |
Al Viro | 1ef64e6 | 2005-10-21 03:22:18 -0400 | [diff] [blame^] | 813 | static void *AtaAlloc(unsigned int size, gfp_t flags) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 814 | { |
| 815 | return atari_stram_alloc(size, "dmasound"); |
| 816 | } |
| 817 | |
| 818 | static void AtaFree(void *obj, unsigned int size) |
| 819 | { |
| 820 | atari_stram_free( obj ); |
| 821 | } |
| 822 | |
| 823 | static int __init AtaIrqInit(void) |
| 824 | { |
| 825 | /* Set up timer A. Timer A |
| 826 | will receive a signal upon end of playing from the sound |
| 827 | hardware. Furthermore Timer A is able to count events |
| 828 | and will cause an interrupt after a programmed number |
| 829 | of events. So all we need to keep the music playing is |
| 830 | to provide the sound hardware with new data upon |
| 831 | an interrupt from timer A. */ |
| 832 | mfp.tim_ct_a = 0; /* ++roman: Stop timer before programming! */ |
| 833 | mfp.tim_dt_a = 1; /* Cause interrupt after first event. */ |
| 834 | mfp.tim_ct_a = 8; /* Turn on event counting. */ |
| 835 | /* Register interrupt handler. */ |
| 836 | request_irq(IRQ_MFP_TIMA, AtaInterrupt, IRQ_TYPE_SLOW, "DMA sound", |
| 837 | AtaInterrupt); |
| 838 | mfp.int_en_a |= 0x20; /* Turn interrupt on. */ |
| 839 | mfp.int_mk_a |= 0x20; |
| 840 | return 1; |
| 841 | } |
| 842 | |
| 843 | #ifdef MODULE |
| 844 | static void AtaIrqCleanUp(void) |
| 845 | { |
| 846 | mfp.tim_ct_a = 0; /* stop timer */ |
| 847 | mfp.int_en_a &= ~0x20; /* turn interrupt off */ |
| 848 | free_irq(IRQ_MFP_TIMA, AtaInterrupt); |
| 849 | } |
| 850 | #endif /* MODULE */ |
| 851 | |
| 852 | |
| 853 | #define TONE_VOXWARE_TO_DB(v) \ |
| 854 | (((v) < 0) ? -12 : ((v) > 100) ? 12 : ((v) - 50) * 6 / 25) |
| 855 | #define TONE_DB_TO_VOXWARE(v) (((v) * 25 + ((v) > 0 ? 5 : -5)) / 6 + 50) |
| 856 | |
| 857 | |
| 858 | static int AtaSetBass(int bass) |
| 859 | { |
| 860 | dmasound.bass = TONE_VOXWARE_TO_DB(bass); |
| 861 | atari_microwire_cmd(MW_LM1992_BASS(dmasound.bass)); |
| 862 | return TONE_DB_TO_VOXWARE(dmasound.bass); |
| 863 | } |
| 864 | |
| 865 | |
| 866 | static int AtaSetTreble(int treble) |
| 867 | { |
| 868 | dmasound.treble = TONE_VOXWARE_TO_DB(treble); |
| 869 | atari_microwire_cmd(MW_LM1992_TREBLE(dmasound.treble)); |
| 870 | return TONE_DB_TO_VOXWARE(dmasound.treble); |
| 871 | } |
| 872 | |
| 873 | |
| 874 | |
| 875 | /* |
| 876 | * TT |
| 877 | */ |
| 878 | |
| 879 | |
| 880 | static void TTSilence(void) |
| 881 | { |
| 882 | tt_dmasnd.ctrl = DMASND_CTRL_OFF; |
| 883 | atari_microwire_cmd(MW_LM1992_PSG_HIGH); /* mix in PSG signal 1:1 */ |
| 884 | } |
| 885 | |
| 886 | |
| 887 | static void TTInit(void) |
| 888 | { |
| 889 | int mode, i, idx; |
| 890 | const int freq[4] = {50066, 25033, 12517, 6258}; |
| 891 | |
| 892 | /* search a frequency that fits into the allowed error range */ |
| 893 | |
| 894 | idx = -1; |
| 895 | for (i = 0; i < ARRAY_SIZE(freq); i++) |
| 896 | /* this isn't as much useful for a TT than for a Falcon, but |
| 897 | * then it doesn't hurt very much to implement it for a TT too. |
| 898 | */ |
| 899 | if ((100 * abs(dmasound.soft.speed - freq[i]) / freq[i]) < catchRadius) |
| 900 | idx = i; |
| 901 | if (idx > -1) { |
| 902 | dmasound.soft.speed = freq[idx]; |
| 903 | dmasound.trans_write = &transTTNormal; |
| 904 | } else |
| 905 | dmasound.trans_write = &transTTExpanding; |
| 906 | |
| 907 | TTSilence(); |
| 908 | dmasound.hard = dmasound.soft; |
| 909 | |
| 910 | if (dmasound.hard.speed > 50066) { |
| 911 | /* we would need to squeeze the sound, but we won't do that */ |
| 912 | dmasound.hard.speed = 50066; |
| 913 | mode = DMASND_MODE_50KHZ; |
| 914 | dmasound.trans_write = &transTTNormal; |
| 915 | } else if (dmasound.hard.speed > 25033) { |
| 916 | dmasound.hard.speed = 50066; |
| 917 | mode = DMASND_MODE_50KHZ; |
| 918 | } else if (dmasound.hard.speed > 12517) { |
| 919 | dmasound.hard.speed = 25033; |
| 920 | mode = DMASND_MODE_25KHZ; |
| 921 | } else if (dmasound.hard.speed > 6258) { |
| 922 | dmasound.hard.speed = 12517; |
| 923 | mode = DMASND_MODE_12KHZ; |
| 924 | } else { |
| 925 | dmasound.hard.speed = 6258; |
| 926 | mode = DMASND_MODE_6KHZ; |
| 927 | } |
| 928 | |
| 929 | tt_dmasnd.mode = (dmasound.hard.stereo ? |
| 930 | DMASND_MODE_STEREO : DMASND_MODE_MONO) | |
| 931 | DMASND_MODE_8BIT | mode; |
| 932 | |
| 933 | expand_bal = -dmasound.soft.speed; |
| 934 | } |
| 935 | |
| 936 | |
| 937 | static int TTSetFormat(int format) |
| 938 | { |
| 939 | /* TT sound DMA supports only 8bit modes */ |
| 940 | |
| 941 | switch (format) { |
| 942 | case AFMT_QUERY: |
| 943 | return dmasound.soft.format; |
| 944 | case AFMT_MU_LAW: |
| 945 | case AFMT_A_LAW: |
| 946 | case AFMT_S8: |
| 947 | case AFMT_U8: |
| 948 | break; |
| 949 | default: |
| 950 | format = AFMT_S8; |
| 951 | } |
| 952 | |
| 953 | dmasound.soft.format = format; |
| 954 | dmasound.soft.size = 8; |
| 955 | if (dmasound.minDev == SND_DEV_DSP) { |
| 956 | dmasound.dsp.format = format; |
| 957 | dmasound.dsp.size = 8; |
| 958 | } |
| 959 | TTInit(); |
| 960 | |
| 961 | return format; |
| 962 | } |
| 963 | |
| 964 | |
| 965 | #define VOLUME_VOXWARE_TO_DB(v) \ |
| 966 | (((v) < 0) ? -40 : ((v) > 100) ? 0 : ((v) * 2) / 5 - 40) |
| 967 | #define VOLUME_DB_TO_VOXWARE(v) ((((v) + 40) * 5 + 1) / 2) |
| 968 | |
| 969 | |
| 970 | static int TTSetVolume(int volume) |
| 971 | { |
| 972 | dmasound.volume_left = VOLUME_VOXWARE_TO_DB(volume & 0xff); |
| 973 | atari_microwire_cmd(MW_LM1992_BALLEFT(dmasound.volume_left)); |
| 974 | dmasound.volume_right = VOLUME_VOXWARE_TO_DB((volume & 0xff00) >> 8); |
| 975 | atari_microwire_cmd(MW_LM1992_BALRIGHT(dmasound.volume_right)); |
| 976 | return VOLUME_DB_TO_VOXWARE(dmasound.volume_left) | |
| 977 | (VOLUME_DB_TO_VOXWARE(dmasound.volume_right) << 8); |
| 978 | } |
| 979 | |
| 980 | |
| 981 | #define GAIN_VOXWARE_TO_DB(v) \ |
| 982 | (((v) < 0) ? -80 : ((v) > 100) ? 0 : ((v) * 4) / 5 - 80) |
| 983 | #define GAIN_DB_TO_VOXWARE(v) ((((v) + 80) * 5 + 1) / 4) |
| 984 | |
| 985 | static int TTSetGain(int gain) |
| 986 | { |
| 987 | dmasound.gain = GAIN_VOXWARE_TO_DB(gain); |
| 988 | atari_microwire_cmd(MW_LM1992_VOLUME(dmasound.gain)); |
| 989 | return GAIN_DB_TO_VOXWARE(dmasound.gain); |
| 990 | } |
| 991 | |
| 992 | |
| 993 | |
| 994 | /* |
| 995 | * Falcon |
| 996 | */ |
| 997 | |
| 998 | |
| 999 | static void FalconSilence(void) |
| 1000 | { |
| 1001 | /* stop playback, set sample rate 50kHz for PSG sound */ |
| 1002 | tt_dmasnd.ctrl = DMASND_CTRL_OFF; |
| 1003 | tt_dmasnd.mode = DMASND_MODE_50KHZ | DMASND_MODE_STEREO | DMASND_MODE_8BIT; |
| 1004 | tt_dmasnd.int_div = 0; /* STE compatible divider */ |
| 1005 | tt_dmasnd.int_ctrl = 0x0; |
| 1006 | tt_dmasnd.cbar_src = 0x0000; /* no matrix inputs */ |
| 1007 | tt_dmasnd.cbar_dst = 0x0000; /* no matrix outputs */ |
| 1008 | tt_dmasnd.dac_src = 1; /* connect ADC to DAC, disconnect matrix */ |
| 1009 | tt_dmasnd.adc_src = 3; /* ADC Input = PSG */ |
| 1010 | } |
| 1011 | |
| 1012 | |
| 1013 | static void FalconInit(void) |
| 1014 | { |
| 1015 | int divider, i, idx; |
| 1016 | const int freq[8] = {49170, 32780, 24585, 19668, 16390, 12292, 9834, 8195}; |
| 1017 | |
| 1018 | /* search a frequency that fits into the allowed error range */ |
| 1019 | |
| 1020 | idx = -1; |
| 1021 | for (i = 0; i < ARRAY_SIZE(freq); i++) |
| 1022 | /* if we will tolerate 3% error 8000Hz->8195Hz (2.38%) would |
| 1023 | * be playable without expanding, but that now a kernel runtime |
| 1024 | * option |
| 1025 | */ |
| 1026 | if ((100 * abs(dmasound.soft.speed - freq[i]) / freq[i]) < catchRadius) |
| 1027 | idx = i; |
| 1028 | if (idx > -1) { |
| 1029 | dmasound.soft.speed = freq[idx]; |
| 1030 | dmasound.trans_write = &transFalconNormal; |
| 1031 | } else |
| 1032 | dmasound.trans_write = &transFalconExpanding; |
| 1033 | |
| 1034 | FalconSilence(); |
| 1035 | dmasound.hard = dmasound.soft; |
| 1036 | |
| 1037 | if (dmasound.hard.size == 16) { |
| 1038 | /* the Falcon can play 16bit samples only in stereo */ |
| 1039 | dmasound.hard.stereo = 1; |
| 1040 | } |
| 1041 | |
| 1042 | if (dmasound.hard.speed > 49170) { |
| 1043 | /* we would need to squeeze the sound, but we won't do that */ |
| 1044 | dmasound.hard.speed = 49170; |
| 1045 | divider = 1; |
| 1046 | dmasound.trans_write = &transFalconNormal; |
| 1047 | } else if (dmasound.hard.speed > 32780) { |
| 1048 | dmasound.hard.speed = 49170; |
| 1049 | divider = 1; |
| 1050 | } else if (dmasound.hard.speed > 24585) { |
| 1051 | dmasound.hard.speed = 32780; |
| 1052 | divider = 2; |
| 1053 | } else if (dmasound.hard.speed > 19668) { |
| 1054 | dmasound.hard.speed = 24585; |
| 1055 | divider = 3; |
| 1056 | } else if (dmasound.hard.speed > 16390) { |
| 1057 | dmasound.hard.speed = 19668; |
| 1058 | divider = 4; |
| 1059 | } else if (dmasound.hard.speed > 12292) { |
| 1060 | dmasound.hard.speed = 16390; |
| 1061 | divider = 5; |
| 1062 | } else if (dmasound.hard.speed > 9834) { |
| 1063 | dmasound.hard.speed = 12292; |
| 1064 | divider = 7; |
| 1065 | } else if (dmasound.hard.speed > 8195) { |
| 1066 | dmasound.hard.speed = 9834; |
| 1067 | divider = 9; |
| 1068 | } else { |
| 1069 | dmasound.hard.speed = 8195; |
| 1070 | divider = 11; |
| 1071 | } |
| 1072 | tt_dmasnd.int_div = divider; |
| 1073 | |
| 1074 | /* Setup Falcon sound DMA for playback */ |
| 1075 | tt_dmasnd.int_ctrl = 0x4; /* Timer A int at play end */ |
| 1076 | tt_dmasnd.track_select = 0x0; /* play 1 track, track 1 */ |
| 1077 | tt_dmasnd.cbar_src = 0x0001; /* DMA(25MHz) --> DAC */ |
| 1078 | tt_dmasnd.cbar_dst = 0x0000; |
| 1079 | tt_dmasnd.rec_track_select = 0; |
| 1080 | tt_dmasnd.dac_src = 2; /* connect matrix to DAC */ |
| 1081 | tt_dmasnd.adc_src = 0; /* ADC Input = Mic */ |
| 1082 | |
| 1083 | tt_dmasnd.mode = (dmasound.hard.stereo ? |
| 1084 | DMASND_MODE_STEREO : DMASND_MODE_MONO) | |
| 1085 | ((dmasound.hard.size == 8) ? |
| 1086 | DMASND_MODE_8BIT : DMASND_MODE_16BIT) | |
| 1087 | DMASND_MODE_6KHZ; |
| 1088 | |
| 1089 | expand_bal = -dmasound.soft.speed; |
| 1090 | } |
| 1091 | |
| 1092 | |
| 1093 | static int FalconSetFormat(int format) |
| 1094 | { |
| 1095 | int size; |
| 1096 | /* Falcon sound DMA supports 8bit and 16bit modes */ |
| 1097 | |
| 1098 | switch (format) { |
| 1099 | case AFMT_QUERY: |
| 1100 | return dmasound.soft.format; |
| 1101 | case AFMT_MU_LAW: |
| 1102 | case AFMT_A_LAW: |
| 1103 | case AFMT_U8: |
| 1104 | case AFMT_S8: |
| 1105 | size = 8; |
| 1106 | break; |
| 1107 | case AFMT_S16_BE: |
| 1108 | case AFMT_U16_BE: |
| 1109 | case AFMT_S16_LE: |
| 1110 | case AFMT_U16_LE: |
| 1111 | size = 16; |
| 1112 | break; |
| 1113 | default: /* :-) */ |
| 1114 | size = 8; |
| 1115 | format = AFMT_S8; |
| 1116 | } |
| 1117 | |
| 1118 | dmasound.soft.format = format; |
| 1119 | dmasound.soft.size = size; |
| 1120 | if (dmasound.minDev == SND_DEV_DSP) { |
| 1121 | dmasound.dsp.format = format; |
| 1122 | dmasound.dsp.size = dmasound.soft.size; |
| 1123 | } |
| 1124 | |
| 1125 | FalconInit(); |
| 1126 | |
| 1127 | return format; |
| 1128 | } |
| 1129 | |
| 1130 | |
| 1131 | /* This is for the Falcon output *attenuation* in 1.5dB steps, |
| 1132 | * i.e. output level from 0 to -22.5dB in -1.5dB steps. |
| 1133 | */ |
| 1134 | #define VOLUME_VOXWARE_TO_ATT(v) \ |
| 1135 | ((v) < 0 ? 15 : (v) > 100 ? 0 : 15 - (v) * 3 / 20) |
| 1136 | #define VOLUME_ATT_TO_VOXWARE(v) (100 - (v) * 20 / 3) |
| 1137 | |
| 1138 | |
| 1139 | static int FalconSetVolume(int volume) |
| 1140 | { |
| 1141 | dmasound.volume_left = VOLUME_VOXWARE_TO_ATT(volume & 0xff); |
| 1142 | dmasound.volume_right = VOLUME_VOXWARE_TO_ATT((volume & 0xff00) >> 8); |
| 1143 | tt_dmasnd.output_atten = dmasound.volume_left << 8 | dmasound.volume_right << 4; |
| 1144 | return VOLUME_ATT_TO_VOXWARE(dmasound.volume_left) | |
| 1145 | VOLUME_ATT_TO_VOXWARE(dmasound.volume_right) << 8; |
| 1146 | } |
| 1147 | |
| 1148 | |
| 1149 | static void AtaPlayNextFrame(int index) |
| 1150 | { |
| 1151 | char *start, *end; |
| 1152 | |
| 1153 | /* used by AtaPlay() if all doubts whether there really is something |
| 1154 | * to be played are already wiped out. |
| 1155 | */ |
| 1156 | start = write_sq.buffers[write_sq.front]; |
| 1157 | end = start+((write_sq.count == index) ? write_sq.rear_size |
| 1158 | : write_sq.block_size); |
| 1159 | /* end might not be a legal virtual address. */ |
| 1160 | DMASNDSetEnd(virt_to_phys(end - 1) + 1); |
| 1161 | DMASNDSetBase(virt_to_phys(start)); |
| 1162 | /* Since only an even number of samples per frame can |
| 1163 | be played, we might lose one byte here. (TO DO) */ |
| 1164 | write_sq.front = (write_sq.front+1) % write_sq.max_count; |
| 1165 | write_sq.active++; |
| 1166 | tt_dmasnd.ctrl = DMASND_CTRL_ON | DMASND_CTRL_REPEAT; |
| 1167 | } |
| 1168 | |
| 1169 | |
| 1170 | static void AtaPlay(void) |
| 1171 | { |
| 1172 | /* ++TeSche: Note that write_sq.active is no longer just a flag but |
| 1173 | * holds the number of frames the DMA is currently programmed for |
| 1174 | * instead, may be 0, 1 (currently being played) or 2 (pre-programmed). |
| 1175 | * |
| 1176 | * Changes done to write_sq.count and write_sq.active are a bit more |
| 1177 | * subtle again so now I must admit I also prefer disabling the irq |
| 1178 | * here rather than considering all possible situations. But the point |
| 1179 | * is that disabling the irq doesn't have any bad influence on this |
| 1180 | * version of the driver as we benefit from having pre-programmed the |
| 1181 | * DMA wherever possible: There's no need to reload the DMA at the |
| 1182 | * exact time of an interrupt but only at some time while the |
| 1183 | * pre-programmed frame is playing! |
| 1184 | */ |
| 1185 | atari_disable_irq(IRQ_MFP_TIMA); |
| 1186 | |
| 1187 | if (write_sq.active == 2 || /* DMA is 'full' */ |
| 1188 | write_sq.count <= 0) { /* nothing to do */ |
| 1189 | atari_enable_irq(IRQ_MFP_TIMA); |
| 1190 | return; |
| 1191 | } |
| 1192 | |
| 1193 | if (write_sq.active == 0) { |
| 1194 | /* looks like there's nothing 'in' the DMA yet, so try |
| 1195 | * to put two frames into it (at least one is available). |
| 1196 | */ |
| 1197 | if (write_sq.count == 1 && |
| 1198 | write_sq.rear_size < write_sq.block_size && |
| 1199 | !write_sq.syncing) { |
| 1200 | /* hmmm, the only existing frame is not |
| 1201 | * yet filled and we're not syncing? |
| 1202 | */ |
| 1203 | atari_enable_irq(IRQ_MFP_TIMA); |
| 1204 | return; |
| 1205 | } |
| 1206 | AtaPlayNextFrame(1); |
| 1207 | if (write_sq.count == 1) { |
| 1208 | /* no more frames */ |
| 1209 | atari_enable_irq(IRQ_MFP_TIMA); |
| 1210 | return; |
| 1211 | } |
| 1212 | if (write_sq.count == 2 && |
| 1213 | write_sq.rear_size < write_sq.block_size && |
| 1214 | !write_sq.syncing) { |
| 1215 | /* hmmm, there were two frames, but the second |
| 1216 | * one is not yet filled and we're not syncing? |
| 1217 | */ |
| 1218 | atari_enable_irq(IRQ_MFP_TIMA); |
| 1219 | return; |
| 1220 | } |
| 1221 | AtaPlayNextFrame(2); |
| 1222 | } else { |
| 1223 | /* there's already a frame being played so we may only stuff |
| 1224 | * one new into the DMA, but even if this may be the last |
| 1225 | * frame existing the previous one is still on write_sq.count. |
| 1226 | */ |
| 1227 | if (write_sq.count == 2 && |
| 1228 | write_sq.rear_size < write_sq.block_size && |
| 1229 | !write_sq.syncing) { |
| 1230 | /* hmmm, the only existing frame is not |
| 1231 | * yet filled and we're not syncing? |
| 1232 | */ |
| 1233 | atari_enable_irq(IRQ_MFP_TIMA); |
| 1234 | return; |
| 1235 | } |
| 1236 | AtaPlayNextFrame(2); |
| 1237 | } |
| 1238 | atari_enable_irq(IRQ_MFP_TIMA); |
| 1239 | } |
| 1240 | |
| 1241 | |
| 1242 | static irqreturn_t AtaInterrupt(int irq, void *dummy, struct pt_regs *fp) |
| 1243 | { |
| 1244 | #if 0 |
| 1245 | /* ++TeSche: if you should want to test this... */ |
| 1246 | static int cnt; |
| 1247 | if (write_sq.active == 2) |
| 1248 | if (++cnt == 10) { |
| 1249 | /* simulate losing an interrupt */ |
| 1250 | cnt = 0; |
| 1251 | return IRQ_HANDLED; |
| 1252 | } |
| 1253 | #endif |
| 1254 | spin_lock(&dmasound.lock); |
| 1255 | if (write_sq_ignore_int && is_falcon) { |
| 1256 | /* ++TeSche: Falcon only: ignore first irq because it comes |
| 1257 | * immediately after starting a frame. after that, irqs come |
| 1258 | * (almost) like on the TT. |
| 1259 | */ |
| 1260 | write_sq_ignore_int = 0; |
| 1261 | return IRQ_HANDLED; |
| 1262 | } |
| 1263 | |
| 1264 | if (!write_sq.active) { |
| 1265 | /* playing was interrupted and sq_reset() has already cleared |
| 1266 | * the sq variables, so better don't do anything here. |
| 1267 | */ |
| 1268 | WAKE_UP(write_sq.sync_queue); |
| 1269 | return IRQ_HANDLED; |
| 1270 | } |
| 1271 | |
| 1272 | /* Probably ;) one frame is finished. Well, in fact it may be that a |
| 1273 | * pre-programmed one is also finished because there has been a long |
| 1274 | * delay in interrupt delivery and we've completely lost one, but |
| 1275 | * there's no way to detect such a situation. In such a case the last |
| 1276 | * frame will be played more than once and the situation will recover |
| 1277 | * as soon as the irq gets through. |
| 1278 | */ |
| 1279 | write_sq.count--; |
| 1280 | write_sq.active--; |
| 1281 | |
| 1282 | if (!write_sq.active) { |
| 1283 | tt_dmasnd.ctrl = DMASND_CTRL_OFF; |
| 1284 | write_sq_ignore_int = 1; |
| 1285 | } |
| 1286 | |
| 1287 | WAKE_UP(write_sq.action_queue); |
| 1288 | /* At least one block of the queue is free now |
| 1289 | so wake up a writing process blocked because |
| 1290 | of a full queue. */ |
| 1291 | |
| 1292 | if ((write_sq.active != 1) || (write_sq.count != 1)) |
| 1293 | /* We must be a bit carefully here: write_sq.count indicates the |
| 1294 | * number of buffers used and not the number of frames to be |
| 1295 | * played. If write_sq.count==1 and write_sq.active==1 that |
| 1296 | * means the only remaining frame was already programmed |
| 1297 | * earlier (and is currently running) so we mustn't call |
| 1298 | * AtaPlay() here, otherwise we'll play one frame too much. |
| 1299 | */ |
| 1300 | AtaPlay(); |
| 1301 | |
| 1302 | if (!write_sq.active) WAKE_UP(write_sq.sync_queue); |
| 1303 | /* We are not playing after AtaPlay(), so there |
| 1304 | is nothing to play any more. Wake up a process |
| 1305 | waiting for audio output to drain. */ |
| 1306 | spin_unlock(&dmasound.lock); |
| 1307 | return IRQ_HANDLED; |
| 1308 | } |
| 1309 | |
| 1310 | |
| 1311 | /*** Mid level stuff *********************************************************/ |
| 1312 | |
| 1313 | |
| 1314 | /* |
| 1315 | * /dev/mixer abstraction |
| 1316 | */ |
| 1317 | |
| 1318 | #define RECLEVEL_VOXWARE_TO_GAIN(v) \ |
| 1319 | ((v) < 0 ? 0 : (v) > 100 ? 15 : (v) * 3 / 20) |
| 1320 | #define RECLEVEL_GAIN_TO_VOXWARE(v) (((v) * 20 + 2) / 3) |
| 1321 | |
| 1322 | |
| 1323 | static void __init TTMixerInit(void) |
| 1324 | { |
| 1325 | atari_microwire_cmd(MW_LM1992_VOLUME(0)); |
| 1326 | dmasound.volume_left = 0; |
| 1327 | atari_microwire_cmd(MW_LM1992_BALLEFT(0)); |
| 1328 | dmasound.volume_right = 0; |
| 1329 | atari_microwire_cmd(MW_LM1992_BALRIGHT(0)); |
| 1330 | atari_microwire_cmd(MW_LM1992_TREBLE(0)); |
| 1331 | atari_microwire_cmd(MW_LM1992_BASS(0)); |
| 1332 | } |
| 1333 | |
| 1334 | static void __init FalconMixerInit(void) |
| 1335 | { |
| 1336 | dmasound.volume_left = (tt_dmasnd.output_atten & 0xf00) >> 8; |
| 1337 | dmasound.volume_right = (tt_dmasnd.output_atten & 0xf0) >> 4; |
| 1338 | } |
| 1339 | |
| 1340 | static int AtaMixerIoctl(u_int cmd, u_long arg) |
| 1341 | { |
| 1342 | int data; |
| 1343 | unsigned long flags; |
| 1344 | switch (cmd) { |
| 1345 | case SOUND_MIXER_READ_SPEAKER: |
| 1346 | if (is_falcon || MACH_IS_TT) { |
| 1347 | int porta; |
| 1348 | spin_lock_irqsave(&dmasound.lock, flags); |
| 1349 | sound_ym.rd_data_reg_sel = 14; |
| 1350 | porta = sound_ym.rd_data_reg_sel; |
| 1351 | spin_unlock_irqrestore(&dmasound.lock, flags); |
| 1352 | return IOCTL_OUT(arg, porta & 0x40 ? 0 : 100); |
| 1353 | } |
| 1354 | break; |
| 1355 | case SOUND_MIXER_WRITE_VOLUME: |
| 1356 | IOCTL_IN(arg, data); |
| 1357 | return IOCTL_OUT(arg, dmasound_set_volume(data)); |
| 1358 | case SOUND_MIXER_WRITE_SPEAKER: |
| 1359 | if (is_falcon || MACH_IS_TT) { |
| 1360 | int porta; |
| 1361 | IOCTL_IN(arg, data); |
| 1362 | spin_lock_irqsave(&dmasound.lock, flags); |
| 1363 | sound_ym.rd_data_reg_sel = 14; |
| 1364 | porta = (sound_ym.rd_data_reg_sel & ~0x40) | |
| 1365 | (data < 50 ? 0x40 : 0); |
| 1366 | sound_ym.wd_data = porta; |
| 1367 | spin_unlock_irqrestore(&dmasound.lock, flags); |
| 1368 | return IOCTL_OUT(arg, porta & 0x40 ? 0 : 100); |
| 1369 | } |
| 1370 | } |
| 1371 | return -EINVAL; |
| 1372 | } |
| 1373 | |
| 1374 | |
| 1375 | static int TTMixerIoctl(u_int cmd, u_long arg) |
| 1376 | { |
| 1377 | int data; |
| 1378 | switch (cmd) { |
| 1379 | case SOUND_MIXER_READ_RECMASK: |
| 1380 | return IOCTL_OUT(arg, 0); |
| 1381 | case SOUND_MIXER_READ_DEVMASK: |
| 1382 | return IOCTL_OUT(arg, |
| 1383 | SOUND_MASK_VOLUME | SOUND_MASK_TREBLE | SOUND_MASK_BASS | |
| 1384 | (MACH_IS_TT ? SOUND_MASK_SPEAKER : 0)); |
| 1385 | case SOUND_MIXER_READ_STEREODEVS: |
| 1386 | return IOCTL_OUT(arg, SOUND_MASK_VOLUME); |
| 1387 | case SOUND_MIXER_READ_VOLUME: |
| 1388 | return IOCTL_OUT(arg, |
| 1389 | VOLUME_DB_TO_VOXWARE(dmasound.volume_left) | |
| 1390 | (VOLUME_DB_TO_VOXWARE(dmasound.volume_right) << 8)); |
| 1391 | case SOUND_MIXER_READ_BASS: |
| 1392 | return IOCTL_OUT(arg, TONE_DB_TO_VOXWARE(dmasound.bass)); |
| 1393 | case SOUND_MIXER_READ_TREBLE: |
| 1394 | return IOCTL_OUT(arg, TONE_DB_TO_VOXWARE(dmasound.treble)); |
| 1395 | case SOUND_MIXER_READ_OGAIN: |
| 1396 | return IOCTL_OUT(arg, GAIN_DB_TO_VOXWARE(dmasound.gain)); |
| 1397 | case SOUND_MIXER_WRITE_BASS: |
| 1398 | IOCTL_IN(arg, data); |
| 1399 | return IOCTL_OUT(arg, dmasound_set_bass(data)); |
| 1400 | case SOUND_MIXER_WRITE_TREBLE: |
| 1401 | IOCTL_IN(arg, data); |
| 1402 | return IOCTL_OUT(arg, dmasound_set_treble(data)); |
| 1403 | case SOUND_MIXER_WRITE_OGAIN: |
| 1404 | IOCTL_IN(arg, data); |
| 1405 | return IOCTL_OUT(arg, dmasound_set_gain(data)); |
| 1406 | } |
| 1407 | return AtaMixerIoctl(cmd, arg); |
| 1408 | } |
| 1409 | |
| 1410 | static int FalconMixerIoctl(u_int cmd, u_long arg) |
| 1411 | { |
| 1412 | int data; |
| 1413 | switch (cmd) { |
| 1414 | case SOUND_MIXER_READ_RECMASK: |
| 1415 | return IOCTL_OUT(arg, SOUND_MASK_MIC); |
| 1416 | case SOUND_MIXER_READ_DEVMASK: |
| 1417 | return IOCTL_OUT(arg, SOUND_MASK_VOLUME | SOUND_MASK_MIC | SOUND_MASK_SPEAKER); |
| 1418 | case SOUND_MIXER_READ_STEREODEVS: |
| 1419 | return IOCTL_OUT(arg, SOUND_MASK_VOLUME | SOUND_MASK_MIC); |
| 1420 | case SOUND_MIXER_READ_VOLUME: |
| 1421 | return IOCTL_OUT(arg, |
| 1422 | VOLUME_ATT_TO_VOXWARE(dmasound.volume_left) | |
| 1423 | VOLUME_ATT_TO_VOXWARE(dmasound.volume_right) << 8); |
| 1424 | case SOUND_MIXER_READ_CAPS: |
| 1425 | return IOCTL_OUT(arg, SOUND_CAP_EXCL_INPUT); |
| 1426 | case SOUND_MIXER_WRITE_MIC: |
| 1427 | IOCTL_IN(arg, data); |
| 1428 | tt_dmasnd.input_gain = |
| 1429 | RECLEVEL_VOXWARE_TO_GAIN(data & 0xff) << 4 | |
| 1430 | RECLEVEL_VOXWARE_TO_GAIN(data >> 8 & 0xff); |
| 1431 | /* fall thru, return set value */ |
| 1432 | case SOUND_MIXER_READ_MIC: |
| 1433 | return IOCTL_OUT(arg, |
| 1434 | RECLEVEL_GAIN_TO_VOXWARE(tt_dmasnd.input_gain >> 4 & 0xf) | |
| 1435 | RECLEVEL_GAIN_TO_VOXWARE(tt_dmasnd.input_gain & 0xf) << 8); |
| 1436 | } |
| 1437 | return AtaMixerIoctl(cmd, arg); |
| 1438 | } |
| 1439 | |
| 1440 | static int AtaWriteSqSetup(void) |
| 1441 | { |
| 1442 | write_sq_ignore_int = 0; |
| 1443 | return 0 ; |
| 1444 | } |
| 1445 | |
| 1446 | static int AtaSqOpen(mode_t mode) |
| 1447 | { |
| 1448 | write_sq_ignore_int = 1; |
| 1449 | return 0 ; |
| 1450 | } |
| 1451 | |
| 1452 | static int TTStateInfo(char *buffer, size_t space) |
| 1453 | { |
| 1454 | int len = 0; |
| 1455 | len += sprintf(buffer+len, "\tvol left %ddB [-40... 0]\n", |
| 1456 | dmasound.volume_left); |
| 1457 | len += sprintf(buffer+len, "\tvol right %ddB [-40... 0]\n", |
| 1458 | dmasound.volume_right); |
| 1459 | len += sprintf(buffer+len, "\tbass %ddB [-12...+12]\n", |
| 1460 | dmasound.bass); |
| 1461 | len += sprintf(buffer+len, "\ttreble %ddB [-12...+12]\n", |
| 1462 | dmasound.treble); |
| 1463 | if (len >= space) { |
| 1464 | printk(KERN_ERR "dmasound_atari: overflowed state buffer alloc.\n") ; |
| 1465 | len = space ; |
| 1466 | } |
| 1467 | return len; |
| 1468 | } |
| 1469 | |
| 1470 | static int FalconStateInfo(char *buffer, size_t space) |
| 1471 | { |
| 1472 | int len = 0; |
| 1473 | len += sprintf(buffer+len, "\tvol left %ddB [-22.5 ... 0]\n", |
| 1474 | dmasound.volume_left); |
| 1475 | len += sprintf(buffer+len, "\tvol right %ddB [-22.5 ... 0]\n", |
| 1476 | dmasound.volume_right); |
| 1477 | if (len >= space) { |
| 1478 | printk(KERN_ERR "dmasound_atari: overflowed state buffer alloc.\n") ; |
| 1479 | len = space ; |
| 1480 | } |
| 1481 | return len; |
| 1482 | } |
| 1483 | |
| 1484 | |
| 1485 | /*** Machine definitions *****************************************************/ |
| 1486 | |
| 1487 | static SETTINGS def_hard_falcon = { |
| 1488 | .format = AFMT_S8, |
| 1489 | .stereo = 0, |
| 1490 | .size = 8, |
| 1491 | .speed = 8195 |
| 1492 | } ; |
| 1493 | |
| 1494 | static SETTINGS def_hard_tt = { |
| 1495 | .format = AFMT_S8, |
| 1496 | .stereo = 0, |
| 1497 | .size = 8, |
| 1498 | .speed = 12517 |
| 1499 | } ; |
| 1500 | |
| 1501 | static SETTINGS def_soft = { |
| 1502 | .format = AFMT_U8, |
| 1503 | .stereo = 0, |
| 1504 | .size = 8, |
| 1505 | .speed = 8000 |
| 1506 | } ; |
| 1507 | |
| 1508 | static MACHINE machTT = { |
| 1509 | .name = "Atari", |
| 1510 | .name2 = "TT", |
| 1511 | .owner = THIS_MODULE, |
| 1512 | .dma_alloc = AtaAlloc, |
| 1513 | .dma_free = AtaFree, |
| 1514 | .irqinit = AtaIrqInit, |
| 1515 | #ifdef MODULE |
| 1516 | .irqcleanup = AtaIrqCleanUp, |
| 1517 | #endif /* MODULE */ |
| 1518 | .init = TTInit, |
| 1519 | .silence = TTSilence, |
| 1520 | .setFormat = TTSetFormat, |
| 1521 | .setVolume = TTSetVolume, |
| 1522 | .setBass = AtaSetBass, |
| 1523 | .setTreble = AtaSetTreble, |
| 1524 | .setGain = TTSetGain, |
| 1525 | .play = AtaPlay, |
| 1526 | .mixer_init = TTMixerInit, |
| 1527 | .mixer_ioctl = TTMixerIoctl, |
| 1528 | .write_sq_setup = AtaWriteSqSetup, |
| 1529 | .sq_open = AtaSqOpen, |
| 1530 | .state_info = TTStateInfo, |
| 1531 | .min_dsp_speed = 6258, |
| 1532 | .version = ((DMASOUND_ATARI_REVISION<<8) | DMASOUND_ATARI_EDITION), |
| 1533 | .hardware_afmts = AFMT_S8, /* h'ware-supported formats *only* here */ |
| 1534 | .capabilities = DSP_CAP_BATCH /* As per SNDCTL_DSP_GETCAPS */ |
| 1535 | }; |
| 1536 | |
| 1537 | static MACHINE machFalcon = { |
| 1538 | .name = "Atari", |
| 1539 | .name2 = "FALCON", |
| 1540 | .dma_alloc = AtaAlloc, |
| 1541 | .dma_free = AtaFree, |
| 1542 | .irqinit = AtaIrqInit, |
| 1543 | #ifdef MODULE |
| 1544 | .irqcleanup = AtaIrqCleanUp, |
| 1545 | #endif /* MODULE */ |
| 1546 | .init = FalconInit, |
| 1547 | .silence = FalconSilence, |
| 1548 | .setFormat = FalconSetFormat, |
| 1549 | .setVolume = FalconSetVolume, |
| 1550 | .setBass = AtaSetBass, |
| 1551 | .setTreble = AtaSetTreble, |
| 1552 | .play = AtaPlay, |
| 1553 | .mixer_init = FalconMixerInit, |
| 1554 | .mixer_ioctl = FalconMixerIoctl, |
| 1555 | .write_sq_setup = AtaWriteSqSetup, |
| 1556 | .sq_open = AtaSqOpen, |
| 1557 | .state_info = FalconStateInfo, |
| 1558 | .min_dsp_speed = 8195, |
| 1559 | .version = ((DMASOUND_ATARI_REVISION<<8) | DMASOUND_ATARI_EDITION), |
| 1560 | .hardware_afmts = (AFMT_S8 | AFMT_S16_BE), /* h'ware-supported formats *only* here */ |
| 1561 | .capabilities = DSP_CAP_BATCH /* As per SNDCTL_DSP_GETCAPS */ |
| 1562 | }; |
| 1563 | |
| 1564 | |
| 1565 | /*** Config & Setup **********************************************************/ |
| 1566 | |
| 1567 | |
| 1568 | static int __init dmasound_atari_init(void) |
| 1569 | { |
| 1570 | if (MACH_IS_ATARI && ATARIHW_PRESENT(PCM_8BIT)) { |
| 1571 | if (ATARIHW_PRESENT(CODEC)) { |
| 1572 | dmasound.mach = machFalcon; |
| 1573 | dmasound.mach.default_soft = def_soft ; |
| 1574 | dmasound.mach.default_hard = def_hard_falcon ; |
| 1575 | is_falcon = 1; |
| 1576 | } else if (ATARIHW_PRESENT(MICROWIRE)) { |
| 1577 | dmasound.mach = machTT; |
| 1578 | dmasound.mach.default_soft = def_soft ; |
| 1579 | dmasound.mach.default_hard = def_hard_tt ; |
| 1580 | is_falcon = 0; |
| 1581 | } else |
| 1582 | return -ENODEV; |
| 1583 | if ((mfp.int_en_a & mfp.int_mk_a & 0x20) == 0) |
| 1584 | return dmasound_init(); |
| 1585 | else { |
| 1586 | printk("DMA sound driver: Timer A interrupt already in use\n"); |
| 1587 | return -EBUSY; |
| 1588 | } |
| 1589 | } |
| 1590 | return -ENODEV; |
| 1591 | } |
| 1592 | |
| 1593 | static void __exit dmasound_atari_cleanup(void) |
| 1594 | { |
| 1595 | dmasound_deinit(); |
| 1596 | } |
| 1597 | |
| 1598 | module_init(dmasound_atari_init); |
| 1599 | module_exit(dmasound_atari_cleanup); |
| 1600 | MODULE_LICENSE("GPL"); |