arch/arm/boot/dts/imx23.dtsi

/*
 * Copyright 2012 Freescale Semiconductor, Inc.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/include/ "skeleton.dtsi"

/ {
	interrupt-parent = <&icoll>;

	aliases {
		gpio0 = &gpio0;
		gpio1 = &gpio1;
		gpio2 = &gpio2;
		serial0 = &auart0;
		serial1 = &auart1;
	};

	cpus {
		cpu@0 {
			compatible = "arm,arm926ejs";
		};
	};

	apb@80000000 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x80000000 0x80000>;
		ranges;

		apbh@80000000 {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x80000000 0x40000>;
			ranges;

			icoll: interrupt-controller@80000000 {
				compatible = "fsl,imx23-icoll", "fsl,icoll";
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x80000000 0x2000>;
			};

			dma-apbh@80004000 {
				compatible = "fsl,imx23-dma-apbh";
				reg = <0x80004000 0x2000>;
				clocks = <&clks 15>;
			};

			ecc@80008000 {
				reg = <0x80008000 0x2000>;
				status = "disabled";
			};

			gpmi-nand@8000c000 {
				compatible = "fsl,imx23-gpmi-nand";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
				reg-names = "gpmi-nand", "bch";
				interrupts = <13>, <56>;
				interrupt-names = "gpmi-dma", "bch";
				clocks = <&clks 34>;
				clock-names = "gpmi_io";
				fsl,gpmi-dma-channel = <4>;
				status = "disabled";
			};

			ssp0: ssp@80010000 {
				reg = <0x80010000 0x2000>;
				interrupts = <15 14>;
				clocks = <&clks 33>;
				fsl,ssp-dma-channel = <1>;
				status = "disabled";
			};

			etm@80014000 {
				reg = <0x80014000 0x2000>;
				status = "disabled";
			};

			pinctrl@80018000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx23-pinctrl", "simple-bus";
				reg = <0x80018000 0x2000>;

				gpio0: gpio@0 {
					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
					interrupts = <16>;
					gpio-controller;
					#gpio-cells = <2>;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				gpio1: gpio@1 {
					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
					interrupts = <17>;
					gpio-controller;
					#gpio-cells = <2>;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				gpio2: gpio@2 {
					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
					interrupts = <18>;
					gpio-controller;
					#gpio-cells = <2>;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				duart_pins_a: duart@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x11a2 /* MX23_PAD_PWM0__DUART_RX */
						0x11b2 /* MX23_PAD_PWM1__DUART_TX */
					>;
					fsl,drive-strength = <0>;
					fsl,voltage = <1>;
					fsl,pull-up = <0>;
				};

				auart0_pins_a: auart0@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
						0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
						0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
						0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
					>;
					fsl,drive-strength = <0>;
					fsl,voltage = <1>;
					fsl,pull-up = <0>;
				};

				auart0_2pins_a: auart0-2pins@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
						0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
					>;
					fsl,drive-strength = <0>;
					fsl,voltage = <1>;
					fsl,pull-up = <0>;
				};

				gpmi_pins_a: gpmi-nand@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
						0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
						0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
						0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
						0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
						0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
						0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
						0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
						0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
						0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
						0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
						0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
						0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
						0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N	*/
					>;
					fsl,drive-strength = <0>;
					fsl,voltage = <1>;
					fsl,pull-up = <0>;
				};

				gpmi_pins_fixup: gpmi-pins-fixup {
					fsl,pinmux-ids = <
						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
					>;
					fsl,drive-strength = <2>;
				};

				mmc0_4bit_pins_a: mmc0-4bit@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
					>;
					fsl,drive-strength = <1>;
					fsl,voltage = <1>;
					fsl,pull-up = <1>;
				};

				mmc0_8bit_pins_a: mmc0-8bit@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
						0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
						0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
						0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
						0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
					>;
					fsl,drive-strength = <1>;
					fsl,voltage = <1>;
					fsl,pull-up = <1>;
				};

				mmc0_pins_fixup: mmc0-pins-fixup {
					fsl,pinmux-ids = <
						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
					>;
					fsl,pull-up = <0>;
				};

				pwm2_pins_a: pwm2@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x11c0 /* MX23_PAD_PWM2__PWM2 */
					>;
					fsl,drive-strength = <0>;
					fsl,voltage = <1>;
					fsl,pull-up = <0>;
				};

				lcdif_24bit_pins_a: lcdif-24bit@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
						0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
						0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
						0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
						0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
						0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
						0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
						0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
						0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
						0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
						0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
						0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
						0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
						0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
						0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
						0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
						0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
						0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
						0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
						0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
						0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
						0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
						0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
						0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
						0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
						0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
						0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
						0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
					>;
					fsl,drive-strength = <0>;
					fsl,voltage = <1>;
					fsl,pull-up = <0>;
				};

				spi2_pins_a: spi2@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
						0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
						0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
						0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
					>;
					fsl,drive-strength = <1>;
					fsl,voltage = <1>;
					fsl,pull-up = <1>;
				};
			};

			digctl@8001c000 {
				reg = <0x8001c000 2000>;
				status = "disabled";
			};

			emi@80020000 {
				reg = <0x80020000 0x2000>;
				status = "disabled";
			};

			dma-apbx@80024000 {
				compatible = "fsl,imx23-dma-apbx";
				reg = <0x80024000 0x2000>;
				clocks = <&clks 16>;
			};

			dcp@80028000 {
				reg = <0x80028000 0x2000>;
				status = "disabled";
			};

			pxp@8002a000 {
				reg = <0x8002a000 0x2000>;
				status = "disabled";
			};

			ocotp@8002c000 {
				reg = <0x8002c000 0x2000>;
				status = "disabled";
			};

			axi-ahb@8002e000 {
				reg = <0x8002e000 0x2000>;
				status = "disabled";
			};

			lcdif@80030000 {
				compatible = "fsl,imx23-lcdif";
				reg = <0x80030000 2000>;
				interrupts = <46 45>;
				clocks = <&clks 38>;
				status = "disabled";
			};

			ssp1: ssp@80034000 {
				reg = <0x80034000 0x2000>;
				interrupts = <2 20>;
				clocks = <&clks 33>;
				fsl,ssp-dma-channel = <2>;
				status = "disabled";
			};

			tvenc@80038000 {
				reg = <0x80038000 0x2000>;
				status = "disabled";
			};
                };

		apbx@80040000 {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x80040000 0x40000>;
			ranges;

			clks: clkctrl@80040000 {
				compatible = "fsl,imx23-clkctrl";
				reg = <0x80040000 0x2000>;
				#clock-cells = <1>;
			};

			saif0: saif@80042000 {
				reg = <0x80042000 0x2000>;
				status = "disabled";
			};

			power@80044000 {
				reg = <0x80044000 0x2000>;
				status = "disabled";
			};

			saif1: saif@80046000 {
				reg = <0x80046000 0x2000>;
				status = "disabled";
			};

			audio-out@80048000 {
				reg = <0x80048000 0x2000>;
				status = "disabled";
			};

			audio-in@8004c000 {
				reg = <0x8004c000 0x2000>;
				status = "disabled";
			};

			lradc@80050000 {
				compatible = "fsl,imx23-lradc";
				reg = <0x80050000 0x2000>;
				interrupts = <36 37 38 39 40 41 42 43 44>;
				status = "disabled";
			};

			spdif@80054000 {
				reg = <0x80054000 2000>;
				status = "disabled";
			};

			i2c@80058000 {
				reg = <0x80058000 0x2000>;
				status = "disabled";
			};

			rtc@8005c000 {
				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
				reg = <0x8005c000 0x2000>;
				interrupts = <22>;
			};

			pwm: pwm@80064000 {
				compatible = "fsl,imx23-pwm";
				reg = <0x80064000 0x2000>;
				clocks = <&clks 30>;
				#pwm-cells = <2>;
				fsl,pwm-number = <5>;
				status = "disabled";
			};

			timrot@80068000 {
				compatible = "fsl,imx23-timrot", "fsl,timrot";
				reg = <0x80068000 0x2000>;
				interrupts = <28 29 30 31>;
			};

			auart0: serial@8006c000 {
				compatible = "fsl,imx23-auart";
				reg = <0x8006c000 0x2000>;
				interrupts = <24 25 23>;
				clocks = <&clks 32>;
				status = "disabled";
			};

			auart1: serial@8006e000 {
				compatible = "fsl,imx23-auart";
				reg = <0x8006e000 0x2000>;
				interrupts = <59 60 58>;
				clocks = <&clks 32>;
				status = "disabled";
			};

			duart: serial@80070000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x80070000 0x2000>;
				interrupts = <0>;
				clocks = <&clks 32>, <&clks 16>;
				clock-names = "uart", "apb_pclk";
				status = "disabled";
			};

			usbphy0: usbphy@8007c000 {
				compatible = "fsl,imx23-usbphy";
				reg = <0x8007c000 0x2000>;
				clocks = <&clks 41>;
				status = "disabled";
			};
		};
	};

	ahb@80080000 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x80080000 0x80000>;
		ranges;

		usb0: usb@80080000 {
			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
			reg = <0x80080000 0x40000>;
			interrupts = <11>;
			fsl,usbphy = <&usbphy0>;
			clocks = <&clks 40>;
			status = "disabled";
		};
	};
};