Martyn Welch | 2a7b753 | 2015-12-01 15:32:47 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2015 Zodiac Inflight Innovations |
| 3 | * |
| 4 | * Author: Martyn Welch <martyn.welch@collabora.co.uk> |
| 5 | * |
| 6 | * Based on twl4030_wdt.c by Timo Kokkonen <timo.t.kokkonen at nokia.com>: |
| 7 | * |
| 8 | * Copyright (C) Nokia Corporation |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License as published by |
| 12 | * the Free Software Foundation; either version 2 of the License, or |
| 13 | * (at your option) any later version. |
| 14 | * |
| 15 | * This program is distributed in the hope that it will be useful, |
| 16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 | * GNU General Public License for more details. |
| 19 | */ |
| 20 | |
| 21 | #include <linux/i2c.h> |
| 22 | #include <linux/kernel.h> |
| 23 | #include <linux/module.h> |
| 24 | #include <linux/slab.h> |
| 25 | #include <linux/sysfs.h> |
| 26 | #include <linux/types.h> |
| 27 | #include <linux/version.h> |
| 28 | #include <linux/watchdog.h> |
| 29 | |
| 30 | #define ZIIRAVE_TIMEOUT_MIN 3 |
| 31 | #define ZIIRAVE_TIMEOUT_MAX 255 |
| 32 | |
| 33 | #define ZIIRAVE_PING_VALUE 0x0 |
| 34 | |
| 35 | #define ZIIRAVE_STATE_INITIAL 0x0 |
| 36 | #define ZIIRAVE_STATE_OFF 0x1 |
| 37 | #define ZIIRAVE_STATE_ON 0x2 |
| 38 | |
Martyn Welch | 0ce72f3 | 2016-02-26 16:05:12 +0000 | [diff] [blame] | 39 | static char *ziirave_reasons[] = {"power cycle", "hw watchdog", NULL, NULL, |
Martyn Welch | 2a7b753 | 2015-12-01 15:32:47 +0000 | [diff] [blame] | 40 | "host request", NULL, "illegal configuration", |
| 41 | "illegal instruction", "illegal trap", |
| 42 | "unknown"}; |
| 43 | |
| 44 | #define ZIIRAVE_WDT_FIRM_VER_MAJOR 0x1 |
| 45 | #define ZIIRAVE_WDT_BOOT_VER_MAJOR 0x3 |
| 46 | #define ZIIRAVE_WDT_RESET_REASON 0x5 |
| 47 | #define ZIIRAVE_WDT_STATE 0x6 |
| 48 | #define ZIIRAVE_WDT_TIMEOUT 0x7 |
| 49 | #define ZIIRAVE_WDT_TIME_LEFT 0x8 |
| 50 | #define ZIIRAVE_WDT_PING 0x9 |
| 51 | #define ZIIRAVE_WDT_RESET_DURATION 0xa |
| 52 | |
| 53 | struct ziirave_wdt_rev { |
| 54 | unsigned char major; |
| 55 | unsigned char minor; |
| 56 | }; |
| 57 | |
| 58 | struct ziirave_wdt_data { |
| 59 | struct watchdog_device wdd; |
| 60 | struct ziirave_wdt_rev bootloader_rev; |
| 61 | struct ziirave_wdt_rev firmware_rev; |
| 62 | int reset_reason; |
| 63 | }; |
| 64 | |
| 65 | static int wdt_timeout; |
| 66 | module_param(wdt_timeout, int, 0); |
| 67 | MODULE_PARM_DESC(wdt_timeout, "Watchdog timeout in seconds"); |
| 68 | |
| 69 | static int reset_duration; |
| 70 | module_param(reset_duration, int, 0); |
| 71 | MODULE_PARM_DESC(reset_duration, |
| 72 | "Watchdog reset pulse duration in milliseconds"); |
| 73 | |
| 74 | static bool nowayout = WATCHDOG_NOWAYOUT; |
| 75 | module_param(nowayout, bool, 0); |
| 76 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started default=" |
| 77 | __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| 78 | |
| 79 | static int ziirave_wdt_revision(struct i2c_client *client, |
| 80 | struct ziirave_wdt_rev *rev, u8 command) |
| 81 | { |
| 82 | int ret; |
| 83 | |
| 84 | ret = i2c_smbus_read_byte_data(client, command); |
| 85 | if (ret < 0) |
| 86 | return ret; |
| 87 | |
| 88 | rev->major = ret; |
| 89 | |
| 90 | ret = i2c_smbus_read_byte_data(client, command + 1); |
| 91 | if (ret < 0) |
| 92 | return ret; |
| 93 | |
| 94 | rev->minor = ret; |
| 95 | |
| 96 | return 0; |
| 97 | } |
| 98 | |
| 99 | static int ziirave_wdt_set_state(struct watchdog_device *wdd, int state) |
| 100 | { |
| 101 | struct i2c_client *client = to_i2c_client(wdd->parent); |
| 102 | |
| 103 | return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_STATE, state); |
| 104 | } |
| 105 | |
| 106 | static int ziirave_wdt_start(struct watchdog_device *wdd) |
| 107 | { |
| 108 | return ziirave_wdt_set_state(wdd, ZIIRAVE_STATE_ON); |
| 109 | } |
| 110 | |
| 111 | static int ziirave_wdt_stop(struct watchdog_device *wdd) |
| 112 | { |
| 113 | return ziirave_wdt_set_state(wdd, ZIIRAVE_STATE_OFF); |
| 114 | } |
| 115 | |
| 116 | static int ziirave_wdt_ping(struct watchdog_device *wdd) |
| 117 | { |
| 118 | struct i2c_client *client = to_i2c_client(wdd->parent); |
| 119 | |
| 120 | return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_PING, |
| 121 | ZIIRAVE_PING_VALUE); |
| 122 | } |
| 123 | |
| 124 | static int ziirave_wdt_set_timeout(struct watchdog_device *wdd, |
| 125 | unsigned int timeout) |
| 126 | { |
| 127 | struct i2c_client *client = to_i2c_client(wdd->parent); |
| 128 | int ret; |
| 129 | |
| 130 | ret = i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_TIMEOUT, timeout); |
| 131 | if (!ret) |
| 132 | wdd->timeout = timeout; |
| 133 | |
| 134 | return ret; |
| 135 | } |
| 136 | |
| 137 | static unsigned int ziirave_wdt_get_timeleft(struct watchdog_device *wdd) |
| 138 | { |
| 139 | struct i2c_client *client = to_i2c_client(wdd->parent); |
| 140 | int ret; |
| 141 | |
| 142 | ret = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_TIME_LEFT); |
| 143 | if (ret < 0) |
| 144 | ret = 0; |
| 145 | |
| 146 | return ret; |
| 147 | } |
| 148 | |
| 149 | static const struct watchdog_info ziirave_wdt_info = { |
| 150 | .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, |
| 151 | .identity = "Zodiac RAVE Watchdog", |
| 152 | }; |
| 153 | |
| 154 | static const struct watchdog_ops ziirave_wdt_ops = { |
| 155 | .owner = THIS_MODULE, |
| 156 | .start = ziirave_wdt_start, |
| 157 | .stop = ziirave_wdt_stop, |
| 158 | .ping = ziirave_wdt_ping, |
| 159 | .set_timeout = ziirave_wdt_set_timeout, |
| 160 | .get_timeleft = ziirave_wdt_get_timeleft, |
| 161 | }; |
| 162 | |
| 163 | static ssize_t ziirave_wdt_sysfs_show_firm(struct device *dev, |
| 164 | struct device_attribute *attr, |
| 165 | char *buf) |
| 166 | { |
| 167 | struct i2c_client *client = to_i2c_client(dev->parent); |
| 168 | struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); |
| 169 | |
| 170 | return sprintf(buf, "02.%02u.%02u", w_priv->firmware_rev.major, |
| 171 | w_priv->firmware_rev.minor); |
| 172 | } |
| 173 | |
| 174 | static DEVICE_ATTR(firmware_version, S_IRUGO, ziirave_wdt_sysfs_show_firm, |
| 175 | NULL); |
| 176 | |
| 177 | static ssize_t ziirave_wdt_sysfs_show_boot(struct device *dev, |
| 178 | struct device_attribute *attr, |
| 179 | char *buf) |
| 180 | { |
| 181 | struct i2c_client *client = to_i2c_client(dev->parent); |
| 182 | struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); |
| 183 | |
| 184 | return sprintf(buf, "01.%02u.%02u", w_priv->bootloader_rev.major, |
| 185 | w_priv->bootloader_rev.minor); |
| 186 | } |
| 187 | |
| 188 | static DEVICE_ATTR(bootloader_version, S_IRUGO, ziirave_wdt_sysfs_show_boot, |
| 189 | NULL); |
| 190 | |
| 191 | static ssize_t ziirave_wdt_sysfs_show_reason(struct device *dev, |
| 192 | struct device_attribute *attr, |
| 193 | char *buf) |
| 194 | { |
| 195 | struct i2c_client *client = to_i2c_client(dev->parent); |
| 196 | struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); |
| 197 | |
| 198 | return sprintf(buf, "%s", ziirave_reasons[w_priv->reset_reason]); |
| 199 | } |
| 200 | |
| 201 | static DEVICE_ATTR(reset_reason, S_IRUGO, ziirave_wdt_sysfs_show_reason, |
| 202 | NULL); |
| 203 | |
| 204 | static struct attribute *ziirave_wdt_attrs[] = { |
| 205 | &dev_attr_firmware_version.attr, |
| 206 | &dev_attr_bootloader_version.attr, |
| 207 | &dev_attr_reset_reason.attr, |
| 208 | NULL |
| 209 | }; |
Guenter Roeck | 2c2f308 | 2016-01-03 15:11:57 -0800 | [diff] [blame] | 210 | ATTRIBUTE_GROUPS(ziirave_wdt); |
Martyn Welch | 2a7b753 | 2015-12-01 15:32:47 +0000 | [diff] [blame] | 211 | |
| 212 | static int ziirave_wdt_init_duration(struct i2c_client *client) |
| 213 | { |
| 214 | int ret; |
| 215 | |
| 216 | if (!reset_duration) { |
| 217 | /* See if the reset pulse duration is provided in an of_node */ |
| 218 | if (!client->dev.of_node) |
| 219 | ret = -ENODEV; |
| 220 | else |
| 221 | ret = of_property_read_u32(client->dev.of_node, |
| 222 | "reset-duration-ms", |
| 223 | &reset_duration); |
| 224 | if (ret) { |
| 225 | dev_info(&client->dev, |
| 226 | "Unable to set reset pulse duration, using default\n"); |
| 227 | return 0; |
| 228 | } |
| 229 | } |
| 230 | |
| 231 | if (reset_duration < 1 || reset_duration > 255) |
| 232 | return -EINVAL; |
| 233 | |
| 234 | dev_info(&client->dev, "Setting reset duration to %dms", |
| 235 | reset_duration); |
| 236 | |
| 237 | return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_RESET_DURATION, |
| 238 | reset_duration); |
| 239 | } |
| 240 | |
| 241 | static int ziirave_wdt_probe(struct i2c_client *client, |
| 242 | const struct i2c_device_id *id) |
| 243 | { |
| 244 | int ret; |
| 245 | struct ziirave_wdt_data *w_priv; |
| 246 | int val; |
| 247 | |
| 248 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| 249 | return -ENODEV; |
| 250 | |
| 251 | w_priv = devm_kzalloc(&client->dev, sizeof(*w_priv), GFP_KERNEL); |
| 252 | if (!w_priv) |
| 253 | return -ENOMEM; |
| 254 | |
| 255 | w_priv->wdd.info = &ziirave_wdt_info; |
| 256 | w_priv->wdd.ops = &ziirave_wdt_ops; |
| 257 | w_priv->wdd.min_timeout = ZIIRAVE_TIMEOUT_MIN; |
| 258 | w_priv->wdd.max_timeout = ZIIRAVE_TIMEOUT_MAX; |
| 259 | w_priv->wdd.parent = &client->dev; |
Guenter Roeck | 2c2f308 | 2016-01-03 15:11:57 -0800 | [diff] [blame] | 260 | w_priv->wdd.groups = ziirave_wdt_groups; |
Martyn Welch | 2a7b753 | 2015-12-01 15:32:47 +0000 | [diff] [blame] | 261 | |
| 262 | ret = watchdog_init_timeout(&w_priv->wdd, wdt_timeout, &client->dev); |
| 263 | if (ret) { |
| 264 | dev_info(&client->dev, |
| 265 | "Unable to select timeout value, using default\n"); |
| 266 | } |
| 267 | |
| 268 | /* |
| 269 | * The default value set in the watchdog should be perfectly valid, so |
| 270 | * pass that in if we haven't provided one via the module parameter or |
| 271 | * of property. |
| 272 | */ |
| 273 | if (w_priv->wdd.timeout == 0) { |
| 274 | val = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_TIMEOUT); |
| 275 | if (val < 0) |
| 276 | return val; |
| 277 | |
| 278 | if (val < ZIIRAVE_TIMEOUT_MIN) |
| 279 | return -ENODEV; |
| 280 | |
| 281 | w_priv->wdd.timeout = val; |
| 282 | } else { |
| 283 | ret = ziirave_wdt_set_timeout(&w_priv->wdd, |
| 284 | w_priv->wdd.timeout); |
| 285 | if (ret) |
| 286 | return ret; |
| 287 | |
| 288 | dev_info(&client->dev, "Timeout set to %ds.", |
| 289 | w_priv->wdd.timeout); |
| 290 | } |
| 291 | |
| 292 | watchdog_set_nowayout(&w_priv->wdd, nowayout); |
| 293 | |
| 294 | i2c_set_clientdata(client, w_priv); |
| 295 | |
| 296 | /* If in unconfigured state, set to stopped */ |
| 297 | val = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_STATE); |
| 298 | if (val < 0) |
| 299 | return val; |
| 300 | |
| 301 | if (val == ZIIRAVE_STATE_INITIAL) |
| 302 | ziirave_wdt_stop(&w_priv->wdd); |
| 303 | |
| 304 | ret = ziirave_wdt_init_duration(client); |
| 305 | if (ret) |
| 306 | return ret; |
| 307 | |
| 308 | ret = ziirave_wdt_revision(client, &w_priv->firmware_rev, |
| 309 | ZIIRAVE_WDT_FIRM_VER_MAJOR); |
| 310 | if (ret) |
| 311 | return ret; |
| 312 | |
| 313 | ret = ziirave_wdt_revision(client, &w_priv->bootloader_rev, |
| 314 | ZIIRAVE_WDT_BOOT_VER_MAJOR); |
| 315 | if (ret) |
| 316 | return ret; |
| 317 | |
| 318 | w_priv->reset_reason = i2c_smbus_read_byte_data(client, |
| 319 | ZIIRAVE_WDT_RESET_REASON); |
| 320 | if (w_priv->reset_reason < 0) |
| 321 | return w_priv->reset_reason; |
| 322 | |
| 323 | if (w_priv->reset_reason >= ARRAY_SIZE(ziirave_reasons) || |
| 324 | !ziirave_reasons[w_priv->reset_reason]) |
| 325 | return -ENODEV; |
| 326 | |
| 327 | ret = watchdog_register_device(&w_priv->wdd); |
Martyn Welch | 2a7b753 | 2015-12-01 15:32:47 +0000 | [diff] [blame] | 328 | |
Guenter Roeck | 2c2f308 | 2016-01-03 15:11:57 -0800 | [diff] [blame] | 329 | return ret; |
Martyn Welch | 2a7b753 | 2015-12-01 15:32:47 +0000 | [diff] [blame] | 330 | } |
| 331 | |
| 332 | static int ziirave_wdt_remove(struct i2c_client *client) |
| 333 | { |
| 334 | struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); |
| 335 | |
Martyn Welch | 2a7b753 | 2015-12-01 15:32:47 +0000 | [diff] [blame] | 336 | watchdog_unregister_device(&w_priv->wdd); |
| 337 | |
| 338 | return 0; |
| 339 | } |
| 340 | |
| 341 | static struct i2c_device_id ziirave_wdt_id[] = { |
Enric Balletbo i Serra | 22daf7a | 2016-07-09 11:43:19 +0200 | [diff] [blame^] | 342 | { "rave-wdt", 0 }, |
Martyn Welch | 2a7b753 | 2015-12-01 15:32:47 +0000 | [diff] [blame] | 343 | { } |
| 344 | }; |
| 345 | MODULE_DEVICE_TABLE(i2c, ziirave_wdt_id); |
| 346 | |
| 347 | static const struct of_device_id zrv_wdt_of_match[] = { |
| 348 | { .compatible = "zii,rave-wdt", }, |
| 349 | { }, |
| 350 | }; |
| 351 | MODULE_DEVICE_TABLE(of, zrv_wdt_of_match); |
| 352 | |
| 353 | static struct i2c_driver ziirave_wdt_driver = { |
| 354 | .driver = { |
| 355 | .name = "ziirave_wdt", |
| 356 | .of_match_table = zrv_wdt_of_match, |
| 357 | }, |
| 358 | .probe = ziirave_wdt_probe, |
| 359 | .remove = ziirave_wdt_remove, |
| 360 | .id_table = ziirave_wdt_id, |
| 361 | }; |
| 362 | |
| 363 | module_i2c_driver(ziirave_wdt_driver); |
| 364 | |
| 365 | MODULE_AUTHOR("Martyn Welch <martyn.welch@collabora.co.uk"); |
| 366 | MODULE_DESCRIPTION("Zodiac Aerospace RAVE Switch Watchdog Processor Driver"); |
| 367 | MODULE_LICENSE("GPL"); |