Haibo Chen | 16846eb | 2015-12-08 18:26:20 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Freescale i.MX7D ADC driver |
| 3 | * |
| 4 | * Copyright (C) 2015 Freescale Semiconductor, Inc. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/clk.h> |
| 13 | #include <linux/completion.h> |
| 14 | #include <linux/err.h> |
| 15 | #include <linux/interrupt.h> |
| 16 | #include <linux/io.h> |
| 17 | #include <linux/kernel.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/platform_device.h> |
| 20 | #include <linux/regulator/consumer.h> |
| 21 | |
| 22 | #include <linux/iio/iio.h> |
| 23 | #include <linux/iio/driver.h> |
| 24 | #include <linux/iio/sysfs.h> |
| 25 | |
| 26 | /* ADC register */ |
| 27 | #define IMX7D_REG_ADC_CH_A_CFG1 0x00 |
| 28 | #define IMX7D_REG_ADC_CH_A_CFG2 0x10 |
| 29 | #define IMX7D_REG_ADC_CH_B_CFG1 0x20 |
| 30 | #define IMX7D_REG_ADC_CH_B_CFG2 0x30 |
| 31 | #define IMX7D_REG_ADC_CH_C_CFG1 0x40 |
| 32 | #define IMX7D_REG_ADC_CH_C_CFG2 0x50 |
| 33 | #define IMX7D_REG_ADC_CH_D_CFG1 0x60 |
| 34 | #define IMX7D_REG_ADC_CH_D_CFG2 0x70 |
| 35 | #define IMX7D_REG_ADC_CH_SW_CFG 0x80 |
| 36 | #define IMX7D_REG_ADC_TIMER_UNIT 0x90 |
| 37 | #define IMX7D_REG_ADC_DMA_FIFO 0xa0 |
| 38 | #define IMX7D_REG_ADC_FIFO_STATUS 0xb0 |
| 39 | #define IMX7D_REG_ADC_INT_SIG_EN 0xc0 |
| 40 | #define IMX7D_REG_ADC_INT_EN 0xd0 |
| 41 | #define IMX7D_REG_ADC_INT_STATUS 0xe0 |
| 42 | #define IMX7D_REG_ADC_CHA_B_CNV_RSLT 0xf0 |
| 43 | #define IMX7D_REG_ADC_CHC_D_CNV_RSLT 0x100 |
| 44 | #define IMX7D_REG_ADC_CH_SW_CNV_RSLT 0x110 |
| 45 | #define IMX7D_REG_ADC_DMA_FIFO_DAT 0x120 |
| 46 | #define IMX7D_REG_ADC_ADC_CFG 0x130 |
| 47 | |
| 48 | #define IMX7D_REG_ADC_CHANNEL_CFG2_BASE 0x10 |
| 49 | #define IMX7D_EACH_CHANNEL_REG_OFFSET 0x20 |
| 50 | |
| 51 | #define IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN (0x1 << 31) |
| 52 | #define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE BIT(30) |
| 53 | #define IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN BIT(29) |
| 54 | #define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(x) ((x) << 24) |
| 55 | |
| 56 | #define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4 (0x0 << 12) |
| 57 | #define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8 (0x1 << 12) |
| 58 | #define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16 (0x2 << 12) |
| 59 | #define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32 (0x3 << 12) |
| 60 | |
| 61 | #define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4 (0x0 << 29) |
| 62 | #define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8 (0x1 << 29) |
| 63 | #define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16 (0x2 << 29) |
| 64 | #define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32 (0x3 << 29) |
| 65 | #define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64 (0x4 << 29) |
| 66 | #define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128 (0x5 << 29) |
| 67 | |
| 68 | #define IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN BIT(31) |
| 69 | #define IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN BIT(1) |
| 70 | #define IMX7D_REG_ADC_ADC_CFG_ADC_EN BIT(0) |
| 71 | |
| 72 | #define IMX7D_REG_ADC_INT_CHA_COV_INT_EN BIT(8) |
| 73 | #define IMX7D_REG_ADC_INT_CHB_COV_INT_EN BIT(9) |
| 74 | #define IMX7D_REG_ADC_INT_CHC_COV_INT_EN BIT(10) |
| 75 | #define IMX7D_REG_ADC_INT_CHD_COV_INT_EN BIT(11) |
| 76 | #define IMX7D_REG_ADC_INT_CHANNEL_INT_EN \ |
| 77 | (IMX7D_REG_ADC_INT_CHA_COV_INT_EN | \ |
| 78 | IMX7D_REG_ADC_INT_CHB_COV_INT_EN | \ |
| 79 | IMX7D_REG_ADC_INT_CHC_COV_INT_EN | \ |
| 80 | IMX7D_REG_ADC_INT_CHD_COV_INT_EN) |
| 81 | #define IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS 0xf00 |
| 82 | #define IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT 0xf0000 |
| 83 | |
| 84 | #define IMX7D_ADC_TIMEOUT msecs_to_jiffies(100) |
| 85 | |
| 86 | enum imx7d_adc_clk_pre_div { |
| 87 | IMX7D_ADC_ANALOG_CLK_PRE_DIV_4, |
| 88 | IMX7D_ADC_ANALOG_CLK_PRE_DIV_8, |
| 89 | IMX7D_ADC_ANALOG_CLK_PRE_DIV_16, |
| 90 | IMX7D_ADC_ANALOG_CLK_PRE_DIV_32, |
| 91 | IMX7D_ADC_ANALOG_CLK_PRE_DIV_64, |
| 92 | IMX7D_ADC_ANALOG_CLK_PRE_DIV_128, |
| 93 | }; |
| 94 | |
| 95 | enum imx7d_adc_average_num { |
| 96 | IMX7D_ADC_AVERAGE_NUM_4, |
| 97 | IMX7D_ADC_AVERAGE_NUM_8, |
| 98 | IMX7D_ADC_AVERAGE_NUM_16, |
| 99 | IMX7D_ADC_AVERAGE_NUM_32, |
| 100 | }; |
| 101 | |
| 102 | struct imx7d_adc_feature { |
| 103 | enum imx7d_adc_clk_pre_div clk_pre_div; |
| 104 | enum imx7d_adc_average_num avg_num; |
| 105 | |
| 106 | u32 core_time_unit; /* impact the sample rate */ |
| 107 | |
| 108 | bool average_en; |
| 109 | }; |
| 110 | |
| 111 | struct imx7d_adc { |
| 112 | struct device *dev; |
| 113 | void __iomem *regs; |
| 114 | struct clk *clk; |
| 115 | |
| 116 | u32 vref_uv; |
| 117 | u32 value; |
| 118 | u32 channel; |
| 119 | u32 pre_div_num; |
| 120 | |
| 121 | struct regulator *vref; |
| 122 | struct imx7d_adc_feature adc_feature; |
| 123 | |
| 124 | struct completion completion; |
| 125 | }; |
| 126 | |
| 127 | struct imx7d_adc_analogue_core_clk { |
| 128 | u32 pre_div; |
| 129 | u32 reg_config; |
| 130 | }; |
| 131 | |
| 132 | #define IMX7D_ADC_ANALOGUE_CLK_CONFIG(_pre_div, _reg_conf) { \ |
| 133 | .pre_div = (_pre_div), \ |
| 134 | .reg_config = (_reg_conf), \ |
| 135 | } |
| 136 | |
| 137 | static const struct imx7d_adc_analogue_core_clk imx7d_adc_analogue_clk[] = { |
| 138 | IMX7D_ADC_ANALOGUE_CLK_CONFIG(4, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4), |
| 139 | IMX7D_ADC_ANALOGUE_CLK_CONFIG(8, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8), |
| 140 | IMX7D_ADC_ANALOGUE_CLK_CONFIG(16, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16), |
| 141 | IMX7D_ADC_ANALOGUE_CLK_CONFIG(32, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32), |
| 142 | IMX7D_ADC_ANALOGUE_CLK_CONFIG(64, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64), |
| 143 | IMX7D_ADC_ANALOGUE_CLK_CONFIG(128, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128), |
| 144 | }; |
| 145 | |
| 146 | #define IMX7D_ADC_CHAN(_idx) { \ |
| 147 | .type = IIO_VOLTAGE, \ |
| 148 | .indexed = 1, \ |
| 149 | .channel = (_idx), \ |
| 150 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| 151 | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ |
| 152 | BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| 153 | } |
| 154 | |
| 155 | static const struct iio_chan_spec imx7d_adc_iio_channels[] = { |
| 156 | IMX7D_ADC_CHAN(0), |
| 157 | IMX7D_ADC_CHAN(1), |
| 158 | IMX7D_ADC_CHAN(2), |
| 159 | IMX7D_ADC_CHAN(3), |
| 160 | IMX7D_ADC_CHAN(4), |
| 161 | IMX7D_ADC_CHAN(5), |
| 162 | IMX7D_ADC_CHAN(6), |
| 163 | IMX7D_ADC_CHAN(7), |
| 164 | IMX7D_ADC_CHAN(8), |
| 165 | IMX7D_ADC_CHAN(9), |
| 166 | IMX7D_ADC_CHAN(10), |
| 167 | IMX7D_ADC_CHAN(11), |
| 168 | IMX7D_ADC_CHAN(12), |
| 169 | IMX7D_ADC_CHAN(13), |
| 170 | IMX7D_ADC_CHAN(14), |
| 171 | IMX7D_ADC_CHAN(15), |
| 172 | }; |
| 173 | |
| 174 | static const u32 imx7d_adc_average_num[] = { |
| 175 | IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4, |
| 176 | IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8, |
| 177 | IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16, |
| 178 | IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32, |
| 179 | }; |
| 180 | |
| 181 | static void imx7d_adc_feature_config(struct imx7d_adc *info) |
| 182 | { |
| 183 | info->adc_feature.clk_pre_div = IMX7D_ADC_ANALOG_CLK_PRE_DIV_4; |
| 184 | info->adc_feature.avg_num = IMX7D_ADC_AVERAGE_NUM_32; |
| 185 | info->adc_feature.core_time_unit = 1; |
| 186 | info->adc_feature.average_en = true; |
| 187 | } |
| 188 | |
| 189 | static void imx7d_adc_sample_rate_set(struct imx7d_adc *info) |
| 190 | { |
| 191 | struct imx7d_adc_feature *adc_feature = &info->adc_feature; |
| 192 | struct imx7d_adc_analogue_core_clk adc_analogure_clk; |
| 193 | u32 i; |
| 194 | u32 tmp_cfg1; |
| 195 | u32 sample_rate = 0; |
| 196 | |
| 197 | /* |
| 198 | * Before sample set, disable channel A,B,C,D. Here we |
| 199 | * clear the bit 31 of register REG_ADC_CH_A\B\C\D_CFG1. |
| 200 | */ |
| 201 | for (i = 0; i < 4; i++) { |
| 202 | tmp_cfg1 = |
| 203 | readl(info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET); |
| 204 | tmp_cfg1 &= ~IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN; |
| 205 | writel(tmp_cfg1, |
| 206 | info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET); |
| 207 | } |
| 208 | |
| 209 | adc_analogure_clk = imx7d_adc_analogue_clk[adc_feature->clk_pre_div]; |
| 210 | sample_rate |= adc_analogure_clk.reg_config; |
| 211 | info->pre_div_num = adc_analogure_clk.pre_div; |
| 212 | |
| 213 | sample_rate |= adc_feature->core_time_unit; |
| 214 | writel(sample_rate, info->regs + IMX7D_REG_ADC_TIMER_UNIT); |
| 215 | } |
| 216 | |
| 217 | static void imx7d_adc_hw_init(struct imx7d_adc *info) |
| 218 | { |
| 219 | u32 cfg; |
| 220 | |
| 221 | /* power up and enable adc analogue core */ |
| 222 | cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG); |
| 223 | cfg &= ~(IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN | |
| 224 | IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN); |
| 225 | cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_EN; |
| 226 | writel(cfg, info->regs + IMX7D_REG_ADC_ADC_CFG); |
| 227 | |
| 228 | /* enable channel A,B,C,D interrupt */ |
| 229 | writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN, |
| 230 | info->regs + IMX7D_REG_ADC_INT_SIG_EN); |
| 231 | writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN, |
| 232 | info->regs + IMX7D_REG_ADC_INT_EN); |
| 233 | |
| 234 | imx7d_adc_sample_rate_set(info); |
| 235 | } |
| 236 | |
| 237 | static void imx7d_adc_channel_set(struct imx7d_adc *info) |
| 238 | { |
| 239 | u32 cfg1 = 0; |
| 240 | u32 cfg2; |
| 241 | u32 channel; |
| 242 | |
| 243 | channel = info->channel; |
| 244 | |
| 245 | /* the channel choose single conversion, and enable average mode */ |
| 246 | cfg1 |= (IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN | |
| 247 | IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE); |
| 248 | if (info->adc_feature.average_en) |
| 249 | cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN; |
| 250 | |
| 251 | /* |
| 252 | * physical channel 0 chose logical channel A |
| 253 | * physical channel 1 chose logical channel B |
| 254 | * physical channel 2 chose logical channel C |
| 255 | * physical channel 3 chose logical channel D |
| 256 | */ |
| 257 | cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(channel); |
| 258 | |
| 259 | /* |
| 260 | * read register REG_ADC_CH_A\B\C\D_CFG2, according to the |
| 261 | * channel chosen |
| 262 | */ |
| 263 | cfg2 = readl(info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel + |
| 264 | IMX7D_REG_ADC_CHANNEL_CFG2_BASE); |
| 265 | |
| 266 | cfg2 |= imx7d_adc_average_num[info->adc_feature.avg_num]; |
| 267 | |
| 268 | /* |
| 269 | * write the register REG_ADC_CH_A\B\C\D_CFG2, according to |
| 270 | * the channel chosen |
| 271 | */ |
| 272 | writel(cfg2, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel + |
| 273 | IMX7D_REG_ADC_CHANNEL_CFG2_BASE); |
| 274 | writel(cfg1, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel); |
| 275 | } |
| 276 | |
| 277 | static u32 imx7d_adc_get_sample_rate(struct imx7d_adc *info) |
| 278 | { |
| 279 | /* input clock is always 24MHz */ |
| 280 | u32 input_clk = 24000000; |
| 281 | u32 analogue_core_clk; |
| 282 | u32 core_time_unit = info->adc_feature.core_time_unit; |
| 283 | u32 tmp; |
| 284 | |
| 285 | analogue_core_clk = input_clk / info->pre_div_num; |
| 286 | tmp = (core_time_unit + 1) * 6; |
| 287 | |
| 288 | return analogue_core_clk / tmp; |
| 289 | } |
| 290 | |
| 291 | static int imx7d_adc_read_raw(struct iio_dev *indio_dev, |
| 292 | struct iio_chan_spec const *chan, |
| 293 | int *val, |
| 294 | int *val2, |
| 295 | long mask) |
| 296 | { |
| 297 | struct imx7d_adc *info = iio_priv(indio_dev); |
| 298 | |
| 299 | u32 channel; |
| 300 | long ret; |
| 301 | |
| 302 | switch (mask) { |
| 303 | case IIO_CHAN_INFO_RAW: |
| 304 | mutex_lock(&indio_dev->mlock); |
| 305 | reinit_completion(&info->completion); |
| 306 | |
| 307 | channel = chan->channel & 0x03; |
| 308 | info->channel = channel; |
| 309 | imx7d_adc_channel_set(info); |
| 310 | |
| 311 | ret = wait_for_completion_interruptible_timeout |
| 312 | (&info->completion, IMX7D_ADC_TIMEOUT); |
| 313 | if (ret == 0) { |
| 314 | mutex_unlock(&indio_dev->mlock); |
| 315 | return -ETIMEDOUT; |
| 316 | } |
| 317 | if (ret < 0) { |
| 318 | mutex_unlock(&indio_dev->mlock); |
| 319 | return ret; |
| 320 | } |
| 321 | |
| 322 | *val = info->value; |
| 323 | mutex_unlock(&indio_dev->mlock); |
| 324 | return IIO_VAL_INT; |
| 325 | |
| 326 | case IIO_CHAN_INFO_SCALE: |
| 327 | info->vref_uv = regulator_get_voltage(info->vref); |
| 328 | *val = info->vref_uv / 1000; |
| 329 | *val2 = 12; |
| 330 | return IIO_VAL_FRACTIONAL_LOG2; |
| 331 | |
| 332 | case IIO_CHAN_INFO_SAMP_FREQ: |
| 333 | *val = imx7d_adc_get_sample_rate(info); |
| 334 | return IIO_VAL_INT; |
| 335 | |
| 336 | default: |
| 337 | return -EINVAL; |
| 338 | } |
| 339 | } |
| 340 | |
| 341 | static int imx7d_adc_read_data(struct imx7d_adc *info) |
| 342 | { |
| 343 | u32 channel; |
| 344 | u32 value; |
| 345 | |
| 346 | channel = info->channel & 0x03; |
| 347 | |
| 348 | /* |
| 349 | * channel A and B conversion result share one register, |
| 350 | * bit[27~16] is the channel B conversion result, |
| 351 | * bit[11~0] is the channel A conversion result. |
| 352 | * channel C and D is the same. |
| 353 | */ |
| 354 | if (channel < 2) |
| 355 | value = readl(info->regs + IMX7D_REG_ADC_CHA_B_CNV_RSLT); |
| 356 | else |
| 357 | value = readl(info->regs + IMX7D_REG_ADC_CHC_D_CNV_RSLT); |
| 358 | if (channel & 0x1) /* channel B or D */ |
| 359 | value = (value >> 16) & 0xFFF; |
| 360 | else /* channel A or C */ |
| 361 | value &= 0xFFF; |
| 362 | |
| 363 | return value; |
| 364 | } |
| 365 | |
| 366 | static irqreturn_t imx7d_adc_isr(int irq, void *dev_id) |
| 367 | { |
| 368 | struct imx7d_adc *info = (struct imx7d_adc *)dev_id; |
| 369 | int status; |
| 370 | |
| 371 | status = readl(info->regs + IMX7D_REG_ADC_INT_STATUS); |
| 372 | if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS) { |
| 373 | info->value = imx7d_adc_read_data(info); |
| 374 | complete(&info->completion); |
| 375 | |
| 376 | /* |
| 377 | * The register IMX7D_REG_ADC_INT_STATUS can't clear |
| 378 | * itself after read operation, need software to write |
| 379 | * 0 to the related bit. Here we clear the channel A/B/C/D |
| 380 | * conversion finished flag. |
| 381 | */ |
| 382 | status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS; |
| 383 | writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS); |
| 384 | } |
| 385 | |
| 386 | /* |
| 387 | * If the channel A/B/C/D conversion timeout, report it and clear these |
| 388 | * timeout flags. |
| 389 | */ |
| 390 | if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT) { |
| 391 | pr_err("%s: ADC got conversion time out interrupt: 0x%08x\n", |
| 392 | dev_name(info->dev), status); |
| 393 | status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT; |
| 394 | writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS); |
| 395 | } |
| 396 | |
| 397 | return IRQ_HANDLED; |
| 398 | } |
| 399 | |
| 400 | static int imx7d_adc_reg_access(struct iio_dev *indio_dev, |
| 401 | unsigned reg, unsigned writeval, |
| 402 | unsigned *readval) |
| 403 | { |
| 404 | struct imx7d_adc *info = iio_priv(indio_dev); |
| 405 | |
| 406 | if (!readval || reg % 4 || reg > IMX7D_REG_ADC_ADC_CFG) |
| 407 | return -EINVAL; |
| 408 | |
| 409 | *readval = readl(info->regs + reg); |
| 410 | |
| 411 | return 0; |
| 412 | } |
| 413 | |
| 414 | static const struct iio_info imx7d_adc_iio_info = { |
| 415 | .driver_module = THIS_MODULE, |
| 416 | .read_raw = &imx7d_adc_read_raw, |
| 417 | .debugfs_reg_access = &imx7d_adc_reg_access, |
| 418 | }; |
| 419 | |
| 420 | static const struct of_device_id imx7d_adc_match[] = { |
| 421 | { .compatible = "fsl,imx7d-adc", }, |
| 422 | { /* sentinel */ } |
| 423 | }; |
| 424 | MODULE_DEVICE_TABLE(of, imx7d_adc_match); |
| 425 | |
| 426 | static void imx7d_adc_power_down(struct imx7d_adc *info) |
| 427 | { |
| 428 | u32 adc_cfg; |
| 429 | |
| 430 | adc_cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG); |
| 431 | adc_cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN | |
| 432 | IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN; |
| 433 | adc_cfg &= ~IMX7D_REG_ADC_ADC_CFG_ADC_EN; |
| 434 | writel(adc_cfg, info->regs + IMX7D_REG_ADC_ADC_CFG); |
| 435 | } |
| 436 | |
| 437 | static int imx7d_adc_probe(struct platform_device *pdev) |
| 438 | { |
| 439 | struct imx7d_adc *info; |
| 440 | struct iio_dev *indio_dev; |
| 441 | struct resource *mem; |
| 442 | int irq; |
| 443 | int ret; |
| 444 | |
| 445 | indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); |
| 446 | if (!indio_dev) { |
| 447 | dev_err(&pdev->dev, "Failed allocating iio device\n"); |
| 448 | return -ENOMEM; |
| 449 | } |
| 450 | |
| 451 | info = iio_priv(indio_dev); |
| 452 | info->dev = &pdev->dev; |
| 453 | |
| 454 | mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 455 | info->regs = devm_ioremap_resource(&pdev->dev, mem); |
| 456 | if (IS_ERR(info->regs)) { |
| 457 | ret = PTR_ERR(info->regs); |
| 458 | dev_err(&pdev->dev, |
| 459 | "Failed to remap adc memory, err = %d\n", ret); |
| 460 | return ret; |
| 461 | } |
| 462 | |
| 463 | irq = platform_get_irq(pdev, 0); |
| 464 | if (irq < 0) { |
| 465 | dev_err(&pdev->dev, "No irq resource?\n"); |
| 466 | return irq; |
| 467 | } |
| 468 | |
| 469 | info->clk = devm_clk_get(&pdev->dev, "adc"); |
| 470 | if (IS_ERR(info->clk)) { |
| 471 | ret = PTR_ERR(info->clk); |
| 472 | dev_err(&pdev->dev, "Failed getting clock, err = %d\n", ret); |
| 473 | return ret; |
| 474 | } |
| 475 | |
| 476 | info->vref = devm_regulator_get(&pdev->dev, "vref"); |
| 477 | if (IS_ERR(info->vref)) { |
| 478 | ret = PTR_ERR(info->vref); |
| 479 | dev_err(&pdev->dev, |
| 480 | "Failed getting reference voltage, err = %d\n", ret); |
| 481 | return ret; |
| 482 | } |
| 483 | |
| 484 | ret = regulator_enable(info->vref); |
| 485 | if (ret) { |
| 486 | dev_err(&pdev->dev, |
| 487 | "Can't enable adc reference top voltage, err = %d\n", |
| 488 | ret); |
| 489 | return ret; |
| 490 | } |
| 491 | |
| 492 | platform_set_drvdata(pdev, indio_dev); |
| 493 | |
| 494 | init_completion(&info->completion); |
| 495 | |
| 496 | indio_dev->name = dev_name(&pdev->dev); |
| 497 | indio_dev->dev.parent = &pdev->dev; |
| 498 | indio_dev->info = &imx7d_adc_iio_info; |
| 499 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 500 | indio_dev->channels = imx7d_adc_iio_channels; |
| 501 | indio_dev->num_channels = ARRAY_SIZE(imx7d_adc_iio_channels); |
| 502 | |
| 503 | ret = clk_prepare_enable(info->clk); |
| 504 | if (ret) { |
| 505 | dev_err(&pdev->dev, |
| 506 | "Could not prepare or enable the clock.\n"); |
| 507 | goto error_adc_clk_enable; |
| 508 | } |
| 509 | |
| 510 | ret = devm_request_irq(info->dev, irq, |
| 511 | imx7d_adc_isr, 0, |
| 512 | dev_name(&pdev->dev), info); |
| 513 | if (ret < 0) { |
| 514 | dev_err(&pdev->dev, "Failed requesting irq, irq = %d\n", irq); |
| 515 | goto error_iio_device_register; |
| 516 | } |
| 517 | |
| 518 | imx7d_adc_feature_config(info); |
| 519 | imx7d_adc_hw_init(info); |
| 520 | |
| 521 | ret = iio_device_register(indio_dev); |
| 522 | if (ret) { |
| 523 | imx7d_adc_power_down(info); |
| 524 | dev_err(&pdev->dev, "Couldn't register the device.\n"); |
| 525 | goto error_iio_device_register; |
| 526 | } |
| 527 | |
| 528 | return 0; |
| 529 | |
| 530 | error_iio_device_register: |
| 531 | clk_disable_unprepare(info->clk); |
| 532 | error_adc_clk_enable: |
| 533 | regulator_disable(info->vref); |
| 534 | |
| 535 | return ret; |
| 536 | } |
| 537 | |
| 538 | static int imx7d_adc_remove(struct platform_device *pdev) |
| 539 | { |
| 540 | struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| 541 | struct imx7d_adc *info = iio_priv(indio_dev); |
| 542 | |
| 543 | iio_device_unregister(indio_dev); |
| 544 | |
| 545 | imx7d_adc_power_down(info); |
| 546 | |
| 547 | clk_disable_unprepare(info->clk); |
| 548 | regulator_disable(info->vref); |
| 549 | |
| 550 | return 0; |
| 551 | } |
| 552 | |
| 553 | static int __maybe_unused imx7d_adc_suspend(struct device *dev) |
| 554 | { |
| 555 | struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| 556 | struct imx7d_adc *info = iio_priv(indio_dev); |
| 557 | |
| 558 | imx7d_adc_power_down(info); |
| 559 | |
| 560 | clk_disable_unprepare(info->clk); |
| 561 | regulator_disable(info->vref); |
| 562 | |
| 563 | return 0; |
| 564 | } |
| 565 | |
| 566 | static int __maybe_unused imx7d_adc_resume(struct device *dev) |
| 567 | { |
| 568 | struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| 569 | struct imx7d_adc *info = iio_priv(indio_dev); |
| 570 | int ret; |
| 571 | |
| 572 | ret = regulator_enable(info->vref); |
| 573 | if (ret) { |
| 574 | dev_err(info->dev, |
| 575 | "Can't enable adc reference top voltage, err = %d\n", |
| 576 | ret); |
| 577 | return ret; |
| 578 | } |
| 579 | |
| 580 | ret = clk_prepare_enable(info->clk); |
| 581 | if (ret) { |
| 582 | dev_err(info->dev, |
| 583 | "Could not prepare or enable clock.\n"); |
| 584 | regulator_disable(info->vref); |
| 585 | return ret; |
| 586 | } |
| 587 | |
| 588 | imx7d_adc_hw_init(info); |
| 589 | |
| 590 | return 0; |
| 591 | } |
| 592 | |
| 593 | static SIMPLE_DEV_PM_OPS(imx7d_adc_pm_ops, imx7d_adc_suspend, imx7d_adc_resume); |
| 594 | |
| 595 | static struct platform_driver imx7d_adc_driver = { |
| 596 | .probe = imx7d_adc_probe, |
| 597 | .remove = imx7d_adc_remove, |
| 598 | .driver = { |
| 599 | .name = "imx7d_adc", |
| 600 | .of_match_table = imx7d_adc_match, |
| 601 | .pm = &imx7d_adc_pm_ops, |
| 602 | }, |
| 603 | }; |
| 604 | |
| 605 | module_platform_driver(imx7d_adc_driver); |
| 606 | |
| 607 | MODULE_AUTHOR("Haibo Chen <haibo.chen@freescale.com>"); |
| 608 | MODULE_DESCRIPTION("Freeacale IMX7D ADC driver"); |
| 609 | MODULE_LICENSE("GPL v2"); |