drivers/video/fsl-diu-fb.c

/*
 * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
 *
 *  Freescale DIU Frame Buffer device driver
 *
 *  Authors: Hongjun Chen <hong-jun.chen@freescale.com>
 *           Paul Widmer <paul.widmer@freescale.com>
 *           Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
 *           York Sun <yorksun@freescale.com>
 *
 *   Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>

#include <linux/of_platform.h>

#include <sysdev/fsl_soc.h>
#include "fsl-diu-fb.h"

/*
 * These parameters give default parameters
 * for video output 1024x768,
 * FIXME - change timing to proper amounts
 * hsync 31.5kHz, vsync 60Hz
 */
static struct fb_videomode __devinitdata fsl_diu_default_mode = {
	.refresh	= 60,
	.xres		= 1024,
	.yres		= 768,
	.pixclock	= 15385,
	.left_margin	= 160,
	.right_margin	= 24,
	.upper_margin	= 29,
	.lower_margin	= 3,
	.hsync_len	= 136,
	.vsync_len	= 6,
	.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	.vmode		= FB_VMODE_NONINTERLACED
};

static struct fb_videomode __devinitdata fsl_diu_mode_db[] = {
	{
		.name		= "1024x768-60",
		.refresh	= 60,
		.xres		= 1024,
		.yres		= 768,
		.pixclock	= 15385,
		.left_margin	= 160,
		.right_margin	= 24,
		.upper_margin	= 29,
		.lower_margin	= 3,
		.hsync_len	= 136,
		.vsync_len	= 6,
		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode		= FB_VMODE_NONINTERLACED
	},
	{
		.name		= "1024x768-70",
		.refresh	= 70,
		.xres		= 1024,
		.yres		= 768,
		.pixclock	= 16886,
		.left_margin	= 3,
		.right_margin	= 3,
		.upper_margin	= 2,
		.lower_margin	= 2,
		.hsync_len	= 40,
		.vsync_len	= 18,
		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode		= FB_VMODE_NONINTERLACED
	},
	{
		.name		= "1024x768-75",
		.refresh	= 75,
		.xres		= 1024,
		.yres		= 768,
		.pixclock	= 15009,
		.left_margin	= 3,
		.right_margin	= 3,
		.upper_margin	= 2,
		.lower_margin	= 2,
		.hsync_len	= 80,
		.vsync_len	= 32,
		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode		= FB_VMODE_NONINTERLACED
	},
	{
		.name		= "1280x1024-60",
		.refresh	= 60,
		.xres		= 1280,
		.yres		= 1024,
		.pixclock	= 9375,
		.left_margin	= 38,
		.right_margin	= 128,
		.upper_margin	= 2,
		.lower_margin	= 7,
		.hsync_len	= 216,
		.vsync_len	= 37,
		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode		= FB_VMODE_NONINTERLACED
	},
	{
		.name		= "1280x1024-70",
		.refresh	= 70,
		.xres		= 1280,
		.yres		= 1024,
		.pixclock	= 9380,
		.left_margin	= 6,
		.right_margin	= 6,
		.upper_margin	= 4,
		.lower_margin	= 4,
		.hsync_len	= 60,
		.vsync_len	= 94,
		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode		= FB_VMODE_NONINTERLACED
	},
	{
		.name		= "1280x1024-75",
		.refresh	= 75,
		.xres		= 1280,
		.yres		= 1024,
		.pixclock	= 9380,
		.left_margin	= 6,
		.right_margin	= 6,
		.upper_margin	= 4,
		.lower_margin	= 4,
		.hsync_len	= 60,
		.vsync_len	= 15,
		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode		= FB_VMODE_NONINTERLACED
	},
	{
		.name		= "320x240",		/* for AOI only */
		.refresh	= 60,
		.xres		= 320,
		.yres		= 240,
		.pixclock	= 15385,
		.left_margin	= 0,
		.right_margin	= 0,
		.upper_margin	= 0,
		.lower_margin	= 0,
		.hsync_len	= 0,
		.vsync_len	= 0,
		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode		= FB_VMODE_NONINTERLACED
	},
	{
		.name		= "1280x480-60",
		.refresh	= 60,
		.xres		= 1280,
		.yres		= 480,
		.pixclock	= 18939,
		.left_margin	= 353,
		.right_margin	= 47,
		.upper_margin	= 39,
		.lower_margin	= 4,
		.hsync_len	= 8,
		.vsync_len	= 2,
		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode		= FB_VMODE_NONINTERLACED
	},
};

static char *fb_mode = "1024x768-32@60";
static unsigned long default_bpp = 32;
static int monitor_port;

#if defined(CONFIG_NOT_COHERENT_CACHE)
static u8 *coherence_data;
static size_t coherence_data_size;
static unsigned int d_cache_line_size;
#endif

static DEFINE_SPINLOCK(diu_lock);

struct fsl_diu_data {
	struct fb_info *fsl_diu_info[FSL_AOI_NUM - 1];
				/*FSL_AOI_NUM has one dummy AOI */
	struct device_attribute dev_attr;
	struct diu_ad *dummy_ad;
	void *dummy_aoi_virt;
	unsigned int irq;
	int fb_enabled;
	int monitor_port;
};

struct mfb_info {
	int index;
	int type;
	char *id;
	int registered;
	int blank;
	unsigned long pseudo_palette[16];
	struct diu_ad *ad;
	int cursor_reset;
	unsigned char g_alpha;
	unsigned int count;
	int x_aoi_d;		/* aoi display x offset to physical screen */
	int y_aoi_d;		/* aoi display y offset to physical screen */
	struct fsl_diu_data *parent;
};


static struct mfb_info mfb_template[] = {
	{		/* AOI 0 for plane 0 */
	.index = 0,
	.type = MFB_TYPE_OUTPUT,
	.id = "Panel0",
	.registered = 0,
	.count = 0,
	.x_aoi_d = 0,
	.y_aoi_d = 0,
	},
	{		/* AOI 0 for plane 1 */
	.index = 1,
	.type = MFB_TYPE_OUTPUT,
	.id = "Panel1 AOI0",
	.registered = 0,
	.g_alpha = 0xff,
	.count = 0,
	.x_aoi_d = 0,
	.y_aoi_d = 0,
	},
	{		/* AOI 1 for plane 1 */
	.index = 2,
	.type = MFB_TYPE_OUTPUT,
	.id = "Panel1 AOI1",
	.registered = 0,
	.g_alpha = 0xff,
	.count = 0,
	.x_aoi_d = 0,
	.y_aoi_d = 480,
	},
	{		/* AOI 0 for plane 2 */
	.index = 3,
	.type = MFB_TYPE_OUTPUT,
	.id = "Panel2 AOI0",
	.registered = 0,
	.g_alpha = 0xff,
	.count = 0,
	.x_aoi_d = 640,
	.y_aoi_d = 0,
	},
	{		/* AOI 1 for plane 2 */
	.index = 4,
	.type = MFB_TYPE_OUTPUT,
	.id = "Panel2 AOI1",
	.registered = 0,
	.g_alpha = 0xff,
	.count = 0,
	.x_aoi_d = 640,
	.y_aoi_d = 480,
	},
};

static struct diu_hw dr = {
	.mode = MFB_MODE1,
	.reg_lock = __SPIN_LOCK_UNLOCKED(diu_hw.reg_lock),
};

static struct diu_pool pool;

/**
 * fsl_diu_alloc - allocate memory for the DIU
 * @size: number of bytes to allocate
 * @param: returned physical address of memory
 *
 * This function allocates a physically-contiguous block of memory.
 */
static void *fsl_diu_alloc(size_t size, phys_addr_t *phys)
{
	void *virt;

	pr_debug("size=%zu\n", size);

	virt = alloc_pages_exact(size, GFP_DMA | __GFP_ZERO);
	if (virt) {
		*phys = virt_to_phys(virt);
		pr_debug("virt=%p phys=%llx\n", virt,
			(unsigned long long)*phys);
	}

	return virt;
}

/**
 * fsl_diu_free - release DIU memory
 * @virt: pointer returned by fsl_diu_alloc()
 * @size: number of bytes allocated by fsl_diu_alloc()
 *
 * This function releases memory allocated by fsl_diu_alloc().
 */
static void fsl_diu_free(void *virt, size_t size)
{
	pr_debug("virt=%p size=%zu\n", virt, size);

	if (virt && size)
		free_pages_exact(virt, size);
}

static int fsl_diu_enable_panel(struct fb_info *info)
{
	struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
	struct diu *hw = dr.diu_reg;
	struct diu_ad *ad = mfbi->ad;
	struct fsl_diu_data *machine_data = mfbi->parent;
	int res = 0;

	pr_debug("enable_panel index %d\n", mfbi->index);
	if (mfbi->type != MFB_TYPE_OFF) {
		switch (mfbi->index) {
		case 0:				/* plane 0 */
			if (hw->desc[0] != ad->paddr)
				out_be32(&hw->desc[0], ad->paddr);
			break;
		case 1:				/* plane 1 AOI 0 */
			cmfbi = machine_data->fsl_diu_info[2]->par;
			if (hw->desc[1] != ad->paddr) {	/* AOI0 closed */
				if (cmfbi->count > 0)	/* AOI1 open */
					ad->next_ad =
						cpu_to_le32(cmfbi->ad->paddr);
				else
					ad->next_ad = 0;
				out_be32(&hw->desc[1], ad->paddr);
			}
			break;
		case 3:				/* plane 2 AOI 0 */
			cmfbi = machine_data->fsl_diu_info[4]->par;
			if (hw->desc[2] != ad->paddr) {	/* AOI0 closed */
				if (cmfbi->count > 0)	/* AOI1 open */
					ad->next_ad =
						cpu_to_le32(cmfbi->ad->paddr);
				else
					ad->next_ad = 0;
				out_be32(&hw->desc[2], ad->paddr);
			}
			break;
		case 2:				/* plane 1 AOI 1 */
			pmfbi = machine_data->fsl_diu_info[1]->par;
			ad->next_ad = 0;
			if (hw->desc[1] == machine_data->dummy_ad->paddr)
				out_be32(&hw->desc[1], ad->paddr);
			else					/* AOI0 open */
				pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
			break;
		case 4:				/* plane 2 AOI 1 */
			pmfbi = machine_data->fsl_diu_info[3]->par;
			ad->next_ad = 0;
			if (hw->desc[2] == machine_data->dummy_ad->paddr)
				out_be32(&hw->desc[2], ad->paddr);
			else				/* AOI0 was open */
				pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
			break;
		default:
			res = -EINVAL;
			break;
		}
	} else
		res = -EINVAL;
	return res;
}

static int fsl_diu_disable_panel(struct fb_info *info)
{
	struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
	struct diu *hw = dr.diu_reg;
	struct diu_ad *ad = mfbi->ad;
	struct fsl_diu_data *machine_data = mfbi->parent;
	int res = 0;

	switch (mfbi->index) {
	case 0:					/* plane 0 */
		if (hw->desc[0] != machine_data->dummy_ad->paddr)
			out_be32(&hw->desc[0],
				machine_data->dummy_ad->paddr);
		break;
	case 1:					/* plane 1 AOI 0 */
		cmfbi = machine_data->fsl_diu_info[2]->par;
		if (cmfbi->count > 0)	/* AOI1 is open */
			out_be32(&hw->desc[1], cmfbi->ad->paddr);
					/* move AOI1 to the first */
		else			/* AOI1 was closed */
			out_be32(&hw->desc[1],
				machine_data->dummy_ad->paddr);
					/* close AOI 0 */
		break;
	case 3:					/* plane 2 AOI 0 */
		cmfbi = machine_data->fsl_diu_info[4]->par;
		if (cmfbi->count > 0)	/* AOI1 is open */
			out_be32(&hw->desc[2], cmfbi->ad->paddr);
					/* move AOI1 to the first */
		else			/* AOI1 was closed */
			out_be32(&hw->desc[2],
				machine_data->dummy_ad->paddr);
					/* close AOI 0 */
		break;
	case 2:					/* plane 1 AOI 1 */
		pmfbi = machine_data->fsl_diu_info[1]->par;
		if (hw->desc[1] != ad->paddr) {
				/* AOI1 is not the first in the chain */
			if (pmfbi->count > 0)
					/* AOI0 is open, must be the first */
				pmfbi->ad->next_ad = 0;
		} else			/* AOI1 is the first in the chain */
			out_be32(&hw->desc[1], machine_data->dummy_ad->paddr);
					/* close AOI 1 */
		break;
	case 4:					/* plane 2 AOI 1 */
		pmfbi = machine_data->fsl_diu_info[3]->par;
		if (hw->desc[2] != ad->paddr) {
				/* AOI1 is not the first in the chain */
			if (pmfbi->count > 0)
				/* AOI0 is open, must be the first */
				pmfbi->ad->next_ad = 0;
		} else		/* AOI1 is the first in the chain */
			out_be32(&hw->desc[2], machine_data->dummy_ad->paddr);
				/* close AOI 1 */
		break;
	default:
		res = -EINVAL;
		break;
	}

	return res;
}

static void enable_lcdc(struct fb_info *info)
{
	struct diu *hw = dr.diu_reg;
	struct mfb_info *mfbi = info->par;
	struct fsl_diu_data *machine_data = mfbi->parent;

	if (!machine_data->fb_enabled) {
		out_be32(&hw->diu_mode, dr.mode);
		machine_data->fb_enabled++;
	}
}

static void disable_lcdc(struct fb_info *info)
{
	struct diu *hw = dr.diu_reg;
	struct mfb_info *mfbi = info->par;
	struct fsl_diu_data *machine_data = mfbi->parent;

	if (machine_data->fb_enabled) {
		out_be32(&hw->diu_mode, 0);
		machine_data->fb_enabled = 0;
	}
}

static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
				struct fb_info *info)
{
	struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par;
	struct fsl_diu_data *machine_data = mfbi->parent;
	int available_height, upper_aoi_bottom, index = mfbi->index;
	int lower_aoi_is_open, upper_aoi_is_open;
	__u32 base_plane_width, base_plane_height, upper_aoi_height;

	base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
	base_plane_height = machine_data->fsl_diu_info[0]->var.yres;

	if (mfbi->x_aoi_d < 0)
		mfbi->x_aoi_d = 0;
	if (mfbi->y_aoi_d < 0)
		mfbi->y_aoi_d = 0;
	switch (index) {
	case 0:
		if (mfbi->x_aoi_d != 0)
			mfbi->x_aoi_d = 0;
		if (mfbi->y_aoi_d != 0)
			mfbi->y_aoi_d = 0;
		break;
	case 1:			/* AOI 0 */
	case 3:
		lower_aoi_mfbi = machine_data->fsl_diu_info[index+1]->par;
		lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0;
		if (var->xres > base_plane_width)
			var->xres = base_plane_width;
		if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
			mfbi->x_aoi_d = base_plane_width - var->xres;

		if (lower_aoi_is_open)
			available_height = lower_aoi_mfbi->y_aoi_d;
		else
			available_height = base_plane_height;
		if (var->yres > available_height)
			var->yres = available_height;
		if ((mfbi->y_aoi_d + var->yres) > available_height)
			mfbi->y_aoi_d = available_height - var->yres;
		break;
	case 2:			/* AOI 1 */
	case 4:
		upper_aoi_mfbi = machine_data->fsl_diu_info[index-1]->par;
		upper_aoi_height =
				machine_data->fsl_diu_info[index-1]->var.yres;
		upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height;
		upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0;
		if (var->xres > base_plane_width)
			var->xres = base_plane_width;
		if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
			mfbi->x_aoi_d = base_plane_width - var->xres;
		if (mfbi->y_aoi_d < 0)
			mfbi->y_aoi_d = 0;
		if (upper_aoi_is_open) {
			if (mfbi->y_aoi_d < upper_aoi_bottom)
				mfbi->y_aoi_d = upper_aoi_bottom;
			available_height = base_plane_height
						- upper_aoi_bottom;
		} else
			available_height = base_plane_height;
		if (var->yres > available_height)
			var->yres = available_height;
		if ((mfbi->y_aoi_d + var->yres) > base_plane_height)
			mfbi->y_aoi_d = base_plane_height - var->yres;
		break;
	}
}
/*
 * Checks to see if the hardware supports the state requested by var passed
 * in. This function does not alter the hardware state! If the var passed in
 * is slightly off by what the hardware can support then we alter the var
 * PASSED in to what we can do. If the hardware doesn't support mode change
 * a -EINVAL will be returned by the upper layers.
 */
static int fsl_diu_check_var(struct fb_var_screeninfo *var,
				struct fb_info *info)
{
	unsigned long htotal, vtotal;

	pr_debug("check_var xres: %d\n", var->xres);
	pr_debug("check_var yres: %d\n", var->yres);

	if (var->xres_virtual < var->xres)
		var->xres_virtual = var->xres;
	if (var->yres_virtual < var->yres)
		var->yres_virtual = var->yres;

	if (var->xoffset < 0)
		var->xoffset = 0;

	if (var->yoffset < 0)
		var->yoffset = 0;

	if (var->xoffset + info->var.xres > info->var.xres_virtual)
		var->xoffset = info->var.xres_virtual - info->var.xres;

	if (var->yoffset + info->var.yres > info->var.yres_virtual)
		var->yoffset = info->var.yres_virtual - info->var.yres;

	if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
	    (var->bits_per_pixel != 16))
		var->bits_per_pixel = default_bpp;

	switch (var->bits_per_pixel) {
	case 16:
		var->red.length = 5;
		var->red.offset = 11;
		var->red.msb_right = 0;

		var->green.length = 6;
		var->green.offset = 5;
		var->green.msb_right = 0;

		var->blue.length = 5;
		var->blue.offset = 0;
		var->blue.msb_right = 0;

		var->transp.length = 0;
		var->transp.offset = 0;
		var->transp.msb_right = 0;
		break;
	case 24:
		var->red.length = 8;
		var->red.offset = 0;
		var->red.msb_right = 0;

		var->green.length = 8;
		var->green.offset = 8;
		var->green.msb_right = 0;

		var->blue.length = 8;
		var->blue.offset = 16;
		var->blue.msb_right = 0;

		var->transp.length = 0;
		var->transp.offset = 0;
		var->transp.msb_right = 0;
		break;
	case 32:
		var->red.length = 8;
		var->red.offset = 16;
		var->red.msb_right = 0;

		var->green.length = 8;
		var->green.offset = 8;
		var->green.msb_right = 0;

		var->blue.length = 8;
		var->blue.offset = 0;
		var->blue.msb_right = 0;

		var->transp.length = 8;
		var->transp.offset = 24;
		var->transp.msb_right = 0;

		break;
	}
	/* If the pixclock is below the minimum spec'd value then set to
	 * refresh rate for 60Hz since this is supported by most monitors.
	 * Refer to Documentation/fb/ for calculations.
	 */
	if ((var->pixclock < MIN_PIX_CLK) || (var->pixclock > MAX_PIX_CLK)) {
		htotal = var->xres + var->right_margin + var->hsync_len +
		    var->left_margin;
		vtotal = var->yres + var->lower_margin + var->vsync_len +
		    var->upper_margin;
		var->pixclock = (vtotal * htotal * 6UL) / 100UL;
		var->pixclock = KHZ2PICOS(var->pixclock);
		pr_debug("pixclock set for 60Hz refresh = %u ps\n",
			var->pixclock);
	}

	var->height = -1;
	var->width = -1;
	var->grayscale = 0;

	/* Copy nonstd field to/from sync for fbset usage */
	var->sync |= var->nonstd;
	var->nonstd |= var->sync;

	adjust_aoi_size_position(var, info);
	return 0;
}

static void set_fix(struct fb_info *info)
{
	struct fb_fix_screeninfo *fix = &info->fix;
	struct fb_var_screeninfo *var = &info->var;
	struct mfb_info *mfbi = info->par;

	strncpy(fix->id, mfbi->id, strlen(mfbi->id));
	fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
	fix->type = FB_TYPE_PACKED_PIXELS;
	fix->accel = FB_ACCEL_NONE;
	fix->visual = FB_VISUAL_TRUECOLOR;
	fix->xpanstep = 1;
	fix->ypanstep = 1;
}

static void update_lcdc(struct fb_info *info)
{
	struct fb_var_screeninfo *var = &info->var;
	struct mfb_info *mfbi = info->par;
	struct fsl_diu_data *machine_data = mfbi->parent;
	struct diu *hw;
	int i, j;
	char __iomem *cursor_base, *gamma_table_base;

	u32 temp;

	hw = dr.diu_reg;

	if (mfbi->type == MFB_TYPE_OFF) {
		fsl_diu_disable_panel(info);
		return;
	}

	diu_ops.set_monitor_port(machine_data->monitor_port);
	gamma_table_base = pool.gamma.vaddr;
	cursor_base = pool.cursor.vaddr;
	/* Prep for DIU init  - gamma table, cursor table */

	for (i = 0; i <= 2; i++)
	   for (j = 0; j <= 255; j++)
	      *gamma_table_base++ = j;

	diu_ops.set_gamma_table(machine_data->monitor_port, pool.gamma.vaddr);

	pr_debug("update-lcdc: HW - %p\n Disabling DIU\n", hw);
	disable_lcdc(info);

	/* Program DIU registers */

	out_be32(&hw->gamma, pool.gamma.paddr);
	out_be32(&hw->cursor, pool.cursor.paddr);

	out_be32(&hw->bgnd, 0x007F7F7F); 	/* BGND */
	out_be32(&hw->bgnd_wb, 0); 		/* BGND_WB */
	out_be32(&hw->disp_size, (var->yres << 16 | var->xres));
						/* DISP SIZE */
	pr_debug("DIU xres: %d\n", var->xres);
	pr_debug("DIU yres: %d\n", var->yres);

	out_be32(&hw->wb_size, 0); /* WB SIZE */
	out_be32(&hw->wb_mem_addr, 0); /* WB MEM ADDR */

	/* Horizontal and vertical configuration register */
	temp = var->left_margin << 22 | /* BP_H */
	       var->hsync_len << 11 |   /* PW_H */
	       var->right_margin;       /* FP_H */

	out_be32(&hw->hsyn_para, temp);

	temp = var->upper_margin << 22 | /* BP_V */
	       var->vsync_len << 11 |    /* PW_V  */
	       var->lower_margin;        /* FP_V  */

	out_be32(&hw->vsyn_para, temp);

	pr_debug("DIU right_margin - %d\n", var->right_margin);
	pr_debug("DIU left_margin - %d\n", var->left_margin);
	pr_debug("DIU hsync_len - %d\n", var->hsync_len);
	pr_debug("DIU upper_margin - %d\n", var->upper_margin);
	pr_debug("DIU lower_margin - %d\n", var->lower_margin);
	pr_debug("DIU vsync_len - %d\n", var->vsync_len);
	pr_debug("DIU HSYNC - 0x%08x\n", hw->hsyn_para);
	pr_debug("DIU VSYNC - 0x%08x\n", hw->vsyn_para);

	diu_ops.set_pixel_clock(var->pixclock);

	out_be32(&hw->syn_pol, 0);	/* SYNC SIGNALS POLARITY */
	out_be32(&hw->thresholds, 0x00037800); /* The Thresholds */
	out_be32(&hw->int_status, 0);	/* INTERRUPT STATUS */
	out_be32(&hw->plut, 0x01F5F666);

	/* Enable the DIU */
	enable_lcdc(info);
}

static int map_video_memory(struct fb_info *info)
{
	phys_addr_t phys;
	u32 smem_len = info->fix.line_length * info->var.yres_virtual;

	pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual);
	pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
	pr_debug("info->fix.line_length  = %d\n", info->fix.line_length);
	pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len);

	info->screen_base = fsl_diu_alloc(smem_len, &phys);
	if (info->screen_base == NULL) {
		printk(KERN_ERR "Unable to allocate fb memory\n");
		return -ENOMEM;
	}
	mutex_lock(&info->mm_lock);
	info->fix.smem_start = (unsigned long) phys;
	info->fix.smem_len = smem_len;
	mutex_unlock(&info->mm_lock);
	info->screen_size = info->fix.smem_len;

	pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n",
		 info->fix.smem_start, info->fix.smem_len);
	pr_debug("screen base %p\n", info->screen_base);

	return 0;
}

static void unmap_video_memory(struct fb_info *info)
{
	fsl_diu_free(info->screen_base, info->fix.smem_len);
	mutex_lock(&info->mm_lock);
	info->screen_base = NULL;
	info->fix.smem_start = 0;
	info->fix.smem_len = 0;
	mutex_unlock(&info->mm_lock);
}

/*
 * Using the fb_var_screeninfo in fb_info we set the aoi of this
 * particular framebuffer. It is a light version of fsl_diu_set_par.
 */
static int fsl_diu_set_aoi(struct fb_info *info)
{
	struct fb_var_screeninfo *var = &info->var;
	struct mfb_info *mfbi = info->par;
	struct diu_ad *ad = mfbi->ad;

	/* AOI should not be greater than display size */
	ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
	ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
	return 0;
}

/*
 * Using the fb_var_screeninfo in fb_info we set the resolution of this
 * particular framebuffer. This function alters the fb_fix_screeninfo stored
 * in fb_info. It does not alter var in fb_info since we are using that
 * data. This means we depend on the data in var inside fb_info to be
 * supported by the hardware. fsl_diu_check_var is always called before
 * fsl_diu_set_par to ensure this.
 */
static int fsl_diu_set_par(struct fb_info *info)
{
	unsigned long len;
	struct fb_var_screeninfo *var = &info->var;
	struct mfb_info *mfbi = info->par;
	struct fsl_diu_data *machine_data = mfbi->parent;
	struct diu_ad *ad = mfbi->ad;
	struct diu *hw;

	hw = dr.diu_reg;

	set_fix(info);
	mfbi->cursor_reset = 1;

	len = info->var.yres_virtual * info->fix.line_length;
	/* Alloc & dealloc each time resolution/bpp change */
	if (len != info->fix.smem_len) {
		if (info->fix.smem_start)
			unmap_video_memory(info);
		pr_debug("SET PAR: smem_len = %d\n", info->fix.smem_len);

		/* Memory allocation for framebuffer */
		if (map_video_memory(info)) {
			printk(KERN_ERR "Unable to allocate fb memory 1\n");
			return -ENOMEM;
		}
	}

	ad->pix_fmt =
		diu_ops.get_pixel_format(var->bits_per_pixel,
					 machine_data->monitor_port);
	ad->addr    = cpu_to_le32(info->fix.smem_start);
	ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
				var->xres_virtual) | mfbi->g_alpha;
	/* AOI should not be greater than display size */
	ad->aoi_size 	= cpu_to_le32((var->yres << 16) | var->xres);
	ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
	ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);

	/* Disable chroma keying function */
	ad->ckmax_r = 0;
	ad->ckmax_g = 0;
	ad->ckmax_b = 0;

	ad->ckmin_r = 255;
	ad->ckmin_g = 255;
	ad->ckmin_b = 255;

	if (mfbi->index == 0)
		update_lcdc(info);
	return 0;
}

static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
{
	return ((val<<width) + 0x7FFF - val)>>16;
}

/*
 * Set a single color register. The values supplied have a 16 bit magnitude
 * which needs to be scaled in this function for the hardware. Things to take
 * into consideration are how many color registers, if any, are supported with
 * the current color visual. With truecolor mode no color palettes are
 * supported. Here a psuedo palette is created which we store the value in
 * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
 * color palette.
 */
static int fsl_diu_setcolreg(unsigned regno, unsigned red, unsigned green,
			   unsigned blue, unsigned transp, struct fb_info *info)
{
	int ret = 1;

	/*
	 * If greyscale is true, then we convert the RGB value
	 * to greyscale no matter what visual we are using.
	 */
	if (info->var.grayscale)
		red = green = blue = (19595 * red + 38470 * green +
				      7471 * blue) >> 16;
	switch (info->fix.visual) {
	case FB_VISUAL_TRUECOLOR:
		/*
		 * 16-bit True Colour.  We encode the RGB value
		 * according to the RGB bitfield information.
		 */
		if (regno < 16) {
			u32 *pal = info->pseudo_palette;
			u32 v;

			red = CNVT_TOHW(red, info->var.red.length);
			green = CNVT_TOHW(green, info->var.green.length);
			blue = CNVT_TOHW(blue, info->var.blue.length);
			transp = CNVT_TOHW(transp, info->var.transp.length);

			v = (red << info->var.red.offset) |
			    (green << info->var.green.offset) |
			    (blue << info->var.blue.offset) |
			    (transp << info->var.transp.offset);

			pal[regno] = v;
			ret = 0;
		}
		break;
	case FB_VISUAL_STATIC_PSEUDOCOLOR:
	case FB_VISUAL_PSEUDOCOLOR:
		break;
	}

	return ret;
}

/*
 * Pan (or wrap, depending on the `vmode' field) the display using the
 * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values
 * don't fit, return -EINVAL.
 */
static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
			     struct fb_info *info)
{
	if ((info->var.xoffset == var->xoffset) &&
	    (info->var.yoffset == var->yoffset))
		return 0;	/* No change, do nothing */

	if (var->xoffset < 0 || var->yoffset < 0
	    || var->xoffset + info->var.xres > info->var.xres_virtual
	    || var->yoffset + info->var.yres > info->var.yres_virtual)
		return -EINVAL;

	info->var.xoffset = var->xoffset;
	info->var.yoffset = var->yoffset;

	if (var->vmode & FB_VMODE_YWRAP)
		info->var.vmode |= FB_VMODE_YWRAP;
	else
		info->var.vmode &= ~FB_VMODE_YWRAP;

	fsl_diu_set_aoi(info);

	return 0;
}

/*
 * Blank the screen if blank_mode != 0, else unblank. Return 0 if blanking
 * succeeded, != 0 if un-/blanking failed.
 * blank_mode == 2: suspend vsync
 * blank_mode == 3: suspend hsync
 * blank_mode == 4: powerdown
 */
static int fsl_diu_blank(int blank_mode, struct fb_info *info)
{
	struct mfb_info *mfbi = info->par;

	mfbi->blank = blank_mode;

	switch (blank_mode) {
	case FB_BLANK_VSYNC_SUSPEND:
	case FB_BLANK_HSYNC_SUSPEND:
	/* FIXME: fixes to enable_panel and enable lcdc needed */
	case FB_BLANK_NORMAL:
	/*	fsl_diu_disable_panel(info);*/
		break;
	case FB_BLANK_POWERDOWN:
	/*	disable_lcdc(info);	*/
		break;
	case FB_BLANK_UNBLANK:
	/*	fsl_diu_enable_panel(info);*/
		break;
	}

	return 0;
}

static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
		       unsigned long arg)
{
	struct mfb_info *mfbi = info->par;
	struct diu_ad *ad = mfbi->ad;
	struct mfb_chroma_key ck;
	unsigned char global_alpha;
	struct aoi_display_offset aoi_d;
	__u32 pix_fmt;
	void __user *buf = (void __user *)arg;

	if (!arg)
		return -EINVAL;
	switch (cmd) {
	case MFB_SET_PIXFMT:
		if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt)))
			return -EFAULT;
		ad->pix_fmt = pix_fmt;
		pr_debug("Set pixel format to 0x%08x\n", ad->pix_fmt);
		break;
	case MFB_GET_PIXFMT:
		pix_fmt = ad->pix_fmt;
		if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt)))
			return -EFAULT;
		pr_debug("get pixel format 0x%08x\n", ad->pix_fmt);
		break;
	case MFB_SET_AOID:
		if (copy_from_user(&aoi_d, buf, sizeof(aoi_d)))
			return -EFAULT;
		mfbi->x_aoi_d = aoi_d.x_aoi_d;
		mfbi->y_aoi_d = aoi_d.y_aoi_d;
		pr_debug("set AOI display offset of index %d to (%d,%d)\n",
				 mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
		fsl_diu_check_var(&info->var, info);
		fsl_diu_set_aoi(info);
		break;
	case MFB_GET_AOID:
		aoi_d.x_aoi_d = mfbi->x_aoi_d;
		aoi_d.y_aoi_d = mfbi->y_aoi_d;
		if (copy_to_user(buf, &aoi_d, sizeof(aoi_d)))
			return -EFAULT;
		pr_debug("get AOI display offset of index %d (%d,%d)\n",
				mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
		break;
	case MFB_GET_ALPHA:
		global_alpha = mfbi->g_alpha;
		if (copy_to_user(buf, &global_alpha, sizeof(global_alpha)))
			return -EFAULT;
		pr_debug("get global alpha of index %d\n", mfbi->index);
		break;
	case MFB_SET_ALPHA:
		/* set panel information */
		if (copy_from_user(&global_alpha, buf, sizeof(global_alpha)))
			return -EFAULT;
		ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) |
							(global_alpha & 0xff);
		mfbi->g_alpha = global_alpha;
		pr_debug("set global alpha for index %d\n", mfbi->index);
		break;
	case MFB_SET_CHROMA_KEY:
		/* set panel winformation */
		if (copy_from_user(&ck, buf, sizeof(ck)))
			return -EFAULT;

		if (ck.enable &&
		   (ck.red_max < ck.red_min ||
		    ck.green_max < ck.green_min ||
		    ck.blue_max < ck.blue_min))
			return -EINVAL;

		if (!ck.enable) {
			ad->ckmax_r = 0;
			ad->ckmax_g = 0;
			ad->ckmax_b = 0;
			ad->ckmin_r = 255;
			ad->ckmin_g = 255;
			ad->ckmin_b = 255;
		} else {
			ad->ckmax_r = ck.red_max;
			ad->ckmax_g = ck.green_max;
			ad->ckmax_b = ck.blue_max;
			ad->ckmin_r = ck.red_min;
			ad->ckmin_g = ck.green_min;
			ad->ckmin_b = ck.blue_min;
		}
		pr_debug("set chroma key\n");
		break;
	case FBIOGET_GWINFO:
		if (mfbi->type == MFB_TYPE_OFF)
			return -ENODEV;
		/* get graphic window information */
		if (copy_to_user(buf, ad, sizeof(*ad)))
			return -EFAULT;
		break;
	case FBIOGET_HWCINFO:
		pr_debug("FBIOGET_HWCINFO:0x%08x\n", FBIOGET_HWCINFO);
		break;
	case FBIOPUT_MODEINFO:
		pr_debug("FBIOPUT_MODEINFO:0x%08x\n", FBIOPUT_MODEINFO);
		break;
	case FBIOGET_DISPINFO:
		pr_debug("FBIOGET_DISPINFO:0x%08x\n", FBIOGET_DISPINFO);
		break;

	default:
		printk(KERN_ERR "Unknown ioctl command (0x%08X)\n", cmd);
		return -ENOIOCTLCMD;
	}

	return 0;
}

/* turn on fb if count == 1
 */
static int fsl_diu_open(struct fb_info *info, int user)
{
	struct mfb_info *mfbi = info->par;
	int res = 0;

	spin_lock(&diu_lock);
	mfbi->count++;
	if (mfbi->count == 1) {
		pr_debug("open plane index %d\n", mfbi->index);
		fsl_diu_check_var(&info->var, info);
		res = fsl_diu_set_par(info);
		if (res < 0)
			mfbi->count--;
		else {
			res = fsl_diu_enable_panel(info);
			if (res < 0)
				mfbi->count--;
		}
	}

	spin_unlock(&diu_lock);
	return res;
}

/* turn off fb if count == 0
 */
static int fsl_diu_release(struct fb_info *info, int user)
{
	struct mfb_info *mfbi = info->par;
	int res = 0;

	spin_lock(&diu_lock);
	mfbi->count--;
	if (mfbi->count == 0) {
		pr_debug("release plane index %d\n", mfbi->index);
		res = fsl_diu_disable_panel(info);
		if (res < 0)
			mfbi->count++;
	}
	spin_unlock(&diu_lock);
	return res;
}

static struct fb_ops fsl_diu_ops = {
	.owner = THIS_MODULE,
	.fb_check_var = fsl_diu_check_var,
	.fb_set_par = fsl_diu_set_par,
	.fb_setcolreg = fsl_diu_setcolreg,
	.fb_blank = fsl_diu_blank,
	.fb_pan_display = fsl_diu_pan_display,
	.fb_fillrect = cfb_fillrect,
	.fb_copyarea = cfb_copyarea,
	.fb_imageblit = cfb_imageblit,
	.fb_ioctl = fsl_diu_ioctl,
	.fb_open = fsl_diu_open,
	.fb_release = fsl_diu_release,
};

static int init_fbinfo(struct fb_info *info)
{
	struct mfb_info *mfbi = info->par;

	info->device = NULL;
	info->var.activate = FB_ACTIVATE_NOW;
	info->fbops = &fsl_diu_ops;
	info->flags = FBINFO_FLAG_DEFAULT;
	info->pseudo_palette = &mfbi->pseudo_palette;

	/* Allocate colormap */
	fb_alloc_cmap(&info->cmap, 16, 0);
	return 0;
}

static int __devinit install_fb(struct fb_info *info)
{
	int rc;
	struct mfb_info *mfbi = info->par;
	const char *aoi_mode, *init_aoi_mode = "320x240";

	if (init_fbinfo(info))
		return -EINVAL;

	if (mfbi->index == 0)	/* plane 0 */
		aoi_mode = fb_mode;
	else
		aoi_mode = init_aoi_mode;
	pr_debug("mode used = %s\n", aoi_mode);
	rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
	     ARRAY_SIZE(fsl_diu_mode_db), &fsl_diu_default_mode, default_bpp);

	switch (rc) {
	case 1:
		pr_debug("using mode specified in @mode\n");
		break;
	case 2:
		pr_debug("using mode specified in @mode "
			"with ignored refresh rate\n");
		break;
	case 3:
		pr_debug("using mode default mode\n");
		break;
	case 4:
		pr_debug("using mode from list\n");
		break;
	default:
		pr_debug("rc = %d\n", rc);
		pr_debug("failed to find mode\n");
		return -EINVAL;
		break;
	}

	pr_debug("xres_virtual %d\n", info->var.xres_virtual);
	pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel);

	pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
	pr_debug("info->fix.line_length = %d\n", info->fix.line_length);

	if (mfbi->type == MFB_TYPE_OFF)
		mfbi->blank = FB_BLANK_NORMAL;
	else
		mfbi->blank = FB_BLANK_UNBLANK;

	if (fsl_diu_check_var(&info->var, info)) {
		printk(KERN_ERR "fb_check_var failed");
		fb_dealloc_cmap(&info->cmap);
		return -EINVAL;
	}

	if (register_framebuffer(info) < 0) {
		printk(KERN_ERR "register_framebuffer failed");
		unmap_video_memory(info);
		fb_dealloc_cmap(&info->cmap);
		return -EINVAL;
	}

	mfbi->registered = 1;
	printk(KERN_INFO "fb%d: %s fb device registered successfully.\n",
		 info->node, info->fix.id);

	return 0;
}

static void uninstall_fb(struct fb_info *info)
{
	struct mfb_info *mfbi = info->par;

	if (!mfbi->registered)
		return;

	unregister_framebuffer(info);
	unmap_video_memory(info);
	if (&info->cmap)
		fb_dealloc_cmap(&info->cmap);

	mfbi->registered = 0;
}

static irqreturn_t fsl_diu_isr(int irq, void *dev_id)
{
	struct diu *hw = dr.diu_reg;
	unsigned int status = in_be32(&hw->int_status);

	if (status) {
		/* This is the workaround for underrun */
		if (status & INT_UNDRUN) {
			out_be32(&hw->diu_mode, 0);
			pr_debug("Err: DIU occurs underrun!\n");
			udelay(1);
			out_be32(&hw->diu_mode, 1);
		}
#if defined(CONFIG_NOT_COHERENT_CACHE)
		else if (status & INT_VSYNC) {
			unsigned int i;
			for (i = 0; i < coherence_data_size;
				i += d_cache_line_size)
				__asm__ __volatile__ (
					"dcbz 0, %[input]"
				::[input]"r"(&coherence_data[i]));
		}
#endif
		return IRQ_HANDLED;
	}
	return IRQ_NONE;
}

static int request_irq_local(int irq)
{
	unsigned long status, ints;
	struct diu *hw;
	int ret;

	hw = dr.diu_reg;

	/* Read to clear the status */
	status = in_be32(&hw->int_status);

	ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL);
	if (ret)
		pr_info("Request diu IRQ failed.\n");
	else {
		ints = INT_PARERR | INT_LS_BF_VS;
#if !defined(CONFIG_NOT_COHERENT_CACHE)
		ints |=	INT_VSYNC;
#endif
		if (dr.mode == MFB_MODE2 || dr.mode == MFB_MODE3)
			ints |= INT_VSYNC_WB;

		/* Read to clear the status */
		status = in_be32(&hw->int_status);
		out_be32(&hw->int_mask, ints);
	}
	return ret;
}

static void free_irq_local(int irq)
{
	struct diu *hw = dr.diu_reg;

	/* Disable all LCDC interrupt */
	out_be32(&hw->int_mask, 0x1f);

	free_irq(irq, NULL);
}

#ifdef CONFIG_PM
/*
 * Power management hooks. Note that we won't be called from IRQ context,
 * unlike the blank functions above, so we may sleep.
 */
static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state)
{
	struct fsl_diu_data *machine_data;

	machine_data = dev_get_drvdata(&ofdev->dev);
	disable_lcdc(machine_data->fsl_diu_info[0]);

	return 0;
}

static int fsl_diu_resume(struct of_device *ofdev)
{
	struct fsl_diu_data *machine_data;

	machine_data = dev_get_drvdata(&ofdev->dev);
	enable_lcdc(machine_data->fsl_diu_info[0]);

	return 0;
}

#else
#define fsl_diu_suspend NULL
#define fsl_diu_resume NULL
#endif				/* CONFIG_PM */

/* Align to 64-bit(8-byte), 32-byte, etc. */
static int allocate_buf(struct device *dev, struct diu_addr *buf, u32 size,
			u32 bytes_align)
{
	u32 offset, ssize;
	u32 mask;
	dma_addr_t paddr = 0;

	ssize = size + bytes_align;
	buf->vaddr = dma_alloc_coherent(dev, ssize, &paddr, GFP_DMA |
							     __GFP_ZERO);
	if (!buf->vaddr)
		return -ENOMEM;

	buf->paddr = (__u32) paddr;

	mask = bytes_align - 1;
	offset = (u32)buf->paddr & mask;
	if (offset) {
		buf->offset = bytes_align - offset;
		buf->paddr = (u32)buf->paddr + offset;
	} else
		buf->offset = 0;
	return 0;
}

static void free_buf(struct device *dev, struct diu_addr *buf, u32 size,
		     u32 bytes_align)
{
	dma_free_coherent(dev, size + bytes_align,
				buf->vaddr, (buf->paddr - buf->offset));
	return;
}

static ssize_t store_monitor(struct device *device,
	struct device_attribute *attr, const char *buf, size_t count)
{
	int old_monitor_port;
	unsigned long val;
	struct fsl_diu_data *machine_data =
		container_of(attr, struct fsl_diu_data, dev_attr);

	if (strict_strtoul(buf, 10, &val))
		return 0;

	old_monitor_port = machine_data->monitor_port;
	machine_data->monitor_port = diu_ops.set_sysfs_monitor_port(val);

	if (old_monitor_port != machine_data->monitor_port) {
		/* All AOIs need adjust pixel format
		 * fsl_diu_set_par only change the pixsel format here
		 * unlikely to fail. */
		fsl_diu_set_par(machine_data->fsl_diu_info[0]);
		fsl_diu_set_par(machine_data->fsl_diu_info[1]);
		fsl_diu_set_par(machine_data->fsl_diu_info[2]);
		fsl_diu_set_par(machine_data->fsl_diu_info[3]);
		fsl_diu_set_par(machine_data->fsl_diu_info[4]);
	}
	return count;
}

static ssize_t show_monitor(struct device *device,
	struct device_attribute *attr, char *buf)
{
	struct fsl_diu_data *machine_data =
		container_of(attr, struct fsl_diu_data, dev_attr);
	return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
}

static int __devinit fsl_diu_probe(struct of_device *ofdev,
	const struct of_device_id *match)
{
	struct device_node *np = ofdev->dev.of_node;
	struct mfb_info *mfbi;
	phys_addr_t dummy_ad_addr;
	int ret, i, error = 0;
	struct resource res;
	struct fsl_diu_data *machine_data;

	machine_data = kzalloc(sizeof(struct fsl_diu_data), GFP_KERNEL);
	if (!machine_data)
		return -ENOMEM;

	for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
		machine_data->fsl_diu_info[i] =
			framebuffer_alloc(sizeof(struct mfb_info), &ofdev->dev);
		if (!machine_data->fsl_diu_info[i]) {
			dev_err(&ofdev->dev, "cannot allocate memory\n");
			ret = -ENOMEM;
			goto error2;
		}
		mfbi = machine_data->fsl_diu_info[i]->par;
		memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
		mfbi->parent = machine_data;
	}

	ret = of_address_to_resource(np, 0, &res);
	if (ret) {
		dev_err(&ofdev->dev, "could not obtain DIU address\n");
		goto error;
	}
	if (!res.start) {
		dev_err(&ofdev->dev, "invalid DIU address\n");
		goto error;
	}
	dev_dbg(&ofdev->dev, "%s, res.start: 0x%08x\n", __func__, res.start);

	dr.diu_reg = ioremap(res.start, sizeof(struct diu));
	if (!dr.diu_reg) {
		dev_err(&ofdev->dev, "Err: can't map DIU registers!\n");
		ret = -EFAULT;
		goto error2;
	}

	out_be32(&dr.diu_reg->diu_mode, 0);		/* disable DIU anyway*/

	/* Get the IRQ of the DIU */
	machine_data->irq = irq_of_parse_and_map(np, 0);

	if (!machine_data->irq) {
		dev_err(&ofdev->dev, "could not get DIU IRQ\n");
		ret = -EINVAL;
		goto error;
	}
	machine_data->monitor_port = monitor_port;

	/* Area descriptor memory pool aligns to 64-bit boundary */
	if (allocate_buf(&ofdev->dev, &pool.ad,
			 sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
		return -ENOMEM;

	/* Get memory for Gamma Table  - 32-byte aligned memory */
	if (allocate_buf(&ofdev->dev, &pool.gamma, 768, 32)) {
		ret = -ENOMEM;
		goto error;
	}

	/* For performance, cursor bitmap buffer aligns to 32-byte boundary */
	if (allocate_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
			 32)) {
		ret = -ENOMEM;
		goto error;
	}

	i = ARRAY_SIZE(machine_data->fsl_diu_info);
	machine_data->dummy_ad = (struct diu_ad *)
			((u32)pool.ad.vaddr + pool.ad.offset) + i;
	machine_data->dummy_ad->paddr = pool.ad.paddr +
			i * sizeof(struct diu_ad);
	machine_data->dummy_aoi_virt = fsl_diu_alloc(64, &dummy_ad_addr);
	if (!machine_data->dummy_aoi_virt) {
		ret = -ENOMEM;
		goto error;
	}
	machine_data->dummy_ad->addr = cpu_to_le32(dummy_ad_addr);
	machine_data->dummy_ad->pix_fmt = 0x88882317;
	machine_data->dummy_ad->src_size_g_alpha = cpu_to_le32((4 << 12) | 4);
	machine_data->dummy_ad->aoi_size = cpu_to_le32((4 << 16) |  2);
	machine_data->dummy_ad->offset_xyi = 0;
	machine_data->dummy_ad->offset_xyd = 0;
	machine_data->dummy_ad->next_ad = 0;

	out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr);
	out_be32(&dr.diu_reg->desc[1], machine_data->dummy_ad->paddr);
	out_be32(&dr.diu_reg->desc[2], machine_data->dummy_ad->paddr);

	for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
		machine_data->fsl_diu_info[i]->fix.smem_start = 0;
		mfbi = machine_data->fsl_diu_info[i]->par;
		mfbi->ad = (struct diu_ad *)((u32)pool.ad.vaddr
					+ pool.ad.offset) + i;
		mfbi->ad->paddr = pool.ad.paddr + i * sizeof(struct diu_ad);
		ret = install_fb(machine_data->fsl_diu_info[i]);
		if (ret) {
			dev_err(&ofdev->dev,
				"Failed to register framebuffer %d\n",
				i);
			goto error;
		}
	}

	if (request_irq_local(machine_data->irq)) {
		dev_err(machine_data->fsl_diu_info[0]->dev,
			"could not request irq for diu.");
		goto error;
	}

	sysfs_attr_init(&machine_data->dev_attr.attr);
	machine_data->dev_attr.attr.name = "monitor";
	machine_data->dev_attr.attr.mode = S_IRUGO|S_IWUSR;
	machine_data->dev_attr.show = show_monitor;
	machine_data->dev_attr.store = store_monitor;
	error = device_create_file(machine_data->fsl_diu_info[0]->dev,
				  &machine_data->dev_attr);
	if (error) {
		dev_err(machine_data->fsl_diu_info[0]->dev,
			"could not create sysfs %s file\n",
			machine_data->dev_attr.attr.name);
	}

	dev_set_drvdata(&ofdev->dev, machine_data);
	return 0;

error:
	for (i = ARRAY_SIZE(machine_data->fsl_diu_info);
		i > 0; i--)
		uninstall_fb(machine_data->fsl_diu_info[i - 1]);
	if (pool.ad.vaddr)
		free_buf(&ofdev->dev, &pool.ad,
			 sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
	if (pool.gamma.vaddr)
		free_buf(&ofdev->dev, &pool.gamma, 768, 32);
	if (pool.cursor.vaddr)
		free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
			 32);
	if (machine_data->dummy_aoi_virt)
		fsl_diu_free(machine_data->dummy_aoi_virt, 64);
	iounmap(dr.diu_reg);

error2:
	for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
		if (machine_data->fsl_diu_info[i])
			framebuffer_release(machine_data->fsl_diu_info[i]);
	kfree(machine_data);

	return ret;
}


static int fsl_diu_remove(struct of_device *ofdev)
{
	struct fsl_diu_data *machine_data;
	int i;

	machine_data = dev_get_drvdata(&ofdev->dev);
	disable_lcdc(machine_data->fsl_diu_info[0]);
	free_irq_local(machine_data->irq);
	for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--)
		uninstall_fb(machine_data->fsl_diu_info[i - 1]);
	if (pool.ad.vaddr)
		free_buf(&ofdev->dev, &pool.ad,
			 sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
	if (pool.gamma.vaddr)
		free_buf(&ofdev->dev, &pool.gamma, 768, 32);
	if (pool.cursor.vaddr)
		free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
			 32);
	if (machine_data->dummy_aoi_virt)
		fsl_diu_free(machine_data->dummy_aoi_virt, 64);
	iounmap(dr.diu_reg);
	for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
		if (machine_data->fsl_diu_info[i])
			framebuffer_release(machine_data->fsl_diu_info[i]);
	kfree(machine_data);

	return 0;
}

#ifndef MODULE
static int __init fsl_diu_setup(char *options)
{
	char *opt;
	unsigned long val;

	if (!options || !*options)
		return 0;

	while ((opt = strsep(&options, ",")) != NULL) {
		if (!*opt)
			continue;
		if (!strncmp(opt, "monitor=", 8)) {
			if (!strict_strtoul(opt + 8, 10, &val) && (val <= 2))
				monitor_port = val;
		} else if (!strncmp(opt, "bpp=", 4)) {
			if (!strict_strtoul(opt + 4, 10, &val))
				default_bpp = val;
		} else
			fb_mode = opt;
	}

	return 0;
}
#endif

static struct of_device_id fsl_diu_match[] = {
#ifdef CONFIG_PPC_MPC512x
	{
		.compatible = "fsl,mpc5121-diu",
	},
#endif
	{
		.compatible = "fsl,diu",
	},
	{}
};
MODULE_DEVICE_TABLE(of, fsl_diu_match);

static struct of_platform_driver fsl_diu_driver = {
	.driver = {
		.name = "fsl_diu",
		.owner = THIS_MODULE,
		.of_match_table = fsl_diu_match,
	},
	.probe  	= fsl_diu_probe,
	.remove 	= fsl_diu_remove,
	.suspend	= fsl_diu_suspend,
	.resume		= fsl_diu_resume,
};

static int __init fsl_diu_init(void)
{
#ifdef CONFIG_NOT_COHERENT_CACHE
	struct device_node *np;
	const u32 *prop;
#endif
	int ret;
#ifndef MODULE
	char *option;

	/*
	 * For kernel boot options (in 'video=xxxfb:<options>' format)
	 */
	if (fb_get_options("fslfb", &option))
		return -ENODEV;
	fsl_diu_setup(option);
#endif
	printk(KERN_INFO "Freescale DIU driver\n");

#ifdef CONFIG_NOT_COHERENT_CACHE
	np = of_find_node_by_type(NULL, "cpu");
	if (!np) {
		printk(KERN_ERR "Err: can't find device node 'cpu'\n");
		return -ENODEV;
	}

	prop = of_get_property(np, "d-cache-size", NULL);
	if (prop == NULL) {
		of_node_put(np);
		return -ENODEV;
	}

	/* Freescale PLRU requires 13/8 times the cache size to do a proper
	   displacement flush
	 */
	coherence_data_size = *prop * 13;
	coherence_data_size /= 8;

	prop = of_get_property(np, "d-cache-line-size", NULL);
	if (prop == NULL) {
		of_node_put(np);
		return -ENODEV;
	}
	d_cache_line_size = *prop;

	of_node_put(np);
	coherence_data = vmalloc(coherence_data_size);
	if (!coherence_data)
		return -ENOMEM;
#endif
	ret = of_register_platform_driver(&fsl_diu_driver);
	if (ret) {
		printk(KERN_ERR
			"fsl-diu: failed to register platform driver\n");
#if defined(CONFIG_NOT_COHERENT_CACHE)
		vfree(coherence_data);
#endif
		iounmap(dr.diu_reg);
	}
	return ret;
}

static void __exit fsl_diu_exit(void)
{
	of_unregister_platform_driver(&fsl_diu_driver);
#if defined(CONFIG_NOT_COHERENT_CACHE)
	vfree(coherence_data);
#endif
}

module_init(fsl_diu_init);
module_exit(fsl_diu_exit);

MODULE_AUTHOR("York Sun <yorksun@freescale.com>");
MODULE_DESCRIPTION("Freescale DIU framebuffer driver");
MODULE_LICENSE("GPL");

module_param_named(mode, fb_mode, charp, 0);
MODULE_PARM_DESC(mode,
	"Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
module_param_named(bpp, default_bpp, ulong, 0);
MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
module_param_named(monitor, monitor_port, int, 0);
MODULE_PARM_DESC(monitor,
	"Specify the monitor port (0, 1 or 2) if supported by the platform");