Tim Harvey | 37b918a | 2016-08-15 12:40:23 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2016 Gateworks Corporation, Inc. All Rights Reserved. |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 |
| 6 | * as published by the Free Software Foundation. |
| 7 | * |
| 8 | * This program is distributed in the hope that it will be useful, |
| 9 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 10 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 11 | * GNU General Public License for more details. |
| 12 | * |
| 13 | */ |
| 14 | #include <linux/i2c.h> |
| 15 | #include <linux/init.h> |
| 16 | #include <linux/interrupt.h> |
| 17 | #include <linux/module.h> |
| 18 | #include <linux/kernel.h> |
| 19 | #include <linux/of.h> |
| 20 | #include <linux/regmap.h> |
| 21 | #include <linux/regulator/driver.h> |
| 22 | #include <linux/regulator/machine.h> |
| 23 | #include <linux/regulator/of_regulator.h> |
| 24 | |
| 25 | #define DRIVER_NAME "ltc3676" |
| 26 | |
| 27 | /* LTC3676 Registers */ |
| 28 | #define LTC3676_BUCK1 0x01 |
| 29 | #define LTC3676_BUCK2 0x02 |
| 30 | #define LTC3676_BUCK3 0x03 |
| 31 | #define LTC3676_BUCK4 0x04 |
| 32 | #define LTC3676_LDOA 0x05 |
| 33 | #define LTC3676_LDOB 0x06 |
| 34 | #define LTC3676_SQD1 0x07 |
| 35 | #define LTC3676_SQD2 0x08 |
| 36 | #define LTC3676_CNTRL 0x09 |
| 37 | #define LTC3676_DVB1A 0x0A |
| 38 | #define LTC3676_DVB1B 0x0B |
| 39 | #define LTC3676_DVB2A 0x0C |
| 40 | #define LTC3676_DVB2B 0x0D |
| 41 | #define LTC3676_DVB3A 0x0E |
| 42 | #define LTC3676_DVB3B 0x0F |
| 43 | #define LTC3676_DVB4A 0x10 |
| 44 | #define LTC3676_DVB4B 0x11 |
| 45 | #define LTC3676_MSKIRQ 0x12 |
| 46 | #define LTC3676_MSKPG 0x13 |
| 47 | #define LTC3676_USER 0x14 |
| 48 | #define LTC3676_IRQSTAT 0x15 |
| 49 | #define LTC3676_PGSTATL 0x16 |
| 50 | #define LTC3676_PGSTATRT 0x17 |
| 51 | #define LTC3676_HRST 0x1E |
| 52 | #define LTC3676_CLIRQ 0x1F |
| 53 | |
| 54 | #define LTC3676_DVBxA_REF_SELECT BIT(5) |
| 55 | |
| 56 | #define LTC3676_IRQSTAT_PGOOD_TIMEOUT BIT(3) |
| 57 | #define LTC3676_IRQSTAT_UNDERVOLT_WARN BIT(4) |
| 58 | #define LTC3676_IRQSTAT_UNDERVOLT_FAULT BIT(5) |
| 59 | #define LTC3676_IRQSTAT_THERMAL_WARN BIT(6) |
| 60 | #define LTC3676_IRQSTAT_THERMAL_FAULT BIT(7) |
| 61 | |
| 62 | enum ltc3676_reg { |
| 63 | LTC3676_SW1, |
| 64 | LTC3676_SW2, |
| 65 | LTC3676_SW3, |
| 66 | LTC3676_SW4, |
| 67 | LTC3676_LDO1, |
| 68 | LTC3676_LDO2, |
| 69 | LTC3676_LDO3, |
| 70 | LTC3676_LDO4, |
| 71 | LTC3676_NUM_REGULATORS, |
| 72 | }; |
| 73 | |
| 74 | struct ltc3676 { |
| 75 | struct regmap *regmap; |
| 76 | struct device *dev; |
| 77 | struct regulator_desc regulator_descs[LTC3676_NUM_REGULATORS]; |
| 78 | struct regulator_dev *regulators[LTC3676_NUM_REGULATORS]; |
| 79 | }; |
| 80 | |
| 81 | static int ltc3676_set_suspend_voltage(struct regulator_dev *rdev, int uV) |
| 82 | { |
| 83 | struct ltc3676 *ltc3676 = rdev_get_drvdata(rdev); |
| 84 | struct device *dev = ltc3676->dev; |
| 85 | int dcdc = rdev_get_id(rdev); |
| 86 | int sel; |
| 87 | |
| 88 | dev_dbg(dev, "%s id=%d uV=%d\n", __func__, dcdc, uV); |
| 89 | sel = regulator_map_voltage_linear(rdev, uV, uV); |
| 90 | if (sel < 0) |
| 91 | return sel; |
| 92 | |
| 93 | /* DVBB register follows right after the corresponding DVBA register */ |
| 94 | return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg + 1, |
| 95 | rdev->desc->vsel_mask, sel); |
| 96 | } |
| 97 | |
| 98 | static int ltc3676_set_suspend_mode(struct regulator_dev *rdev, |
| 99 | unsigned int mode) |
| 100 | { |
| 101 | struct ltc3676 *ltc3676= rdev_get_drvdata(rdev); |
| 102 | struct device *dev = ltc3676->dev; |
| 103 | int mask, val; |
| 104 | int dcdc = rdev_get_id(rdev); |
| 105 | |
| 106 | dev_dbg(dev, "%s id=%d mode=%d\n", __func__, dcdc, mode); |
| 107 | |
| 108 | mask = LTC3676_DVBxA_REF_SELECT; |
| 109 | switch (mode) { |
| 110 | case REGULATOR_MODE_STANDBY: |
| 111 | val = 0; /* select DVBxA */ |
| 112 | break; |
| 113 | case REGULATOR_MODE_NORMAL: |
| 114 | val = LTC3676_DVBxA_REF_SELECT; /* select DVBxB */ |
| 115 | break; |
| 116 | default: |
| 117 | dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n", |
| 118 | rdev->desc->name, mode); |
| 119 | return -EINVAL; |
| 120 | } |
| 121 | |
| 122 | return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg, |
| 123 | mask, val); |
| 124 | } |
| 125 | |
| 126 | static inline unsigned int ltc3676_scale(unsigned int uV, u32 r1, u32 r2) |
| 127 | { |
| 128 | uint64_t tmp; |
| 129 | if (uV == 0) |
| 130 | return 0; |
| 131 | tmp = (uint64_t)uV * r1; |
| 132 | do_div(tmp, r2); |
| 133 | return uV + (unsigned int)tmp; |
| 134 | } |
| 135 | |
| 136 | static int ltc3676_of_parse_cb(struct device_node *np, |
| 137 | const struct regulator_desc *desc, |
| 138 | struct regulator_config *config) |
| 139 | { |
| 140 | struct ltc3676 *ltc3676 = config->driver_data; |
| 141 | struct regulator_desc *rdesc = <c3676->regulator_descs[desc->id]; |
| 142 | u32 r[2]; |
| 143 | int ret; |
| 144 | |
| 145 | /* LDO3 has a fixed output */ |
| 146 | if (desc->id == LTC3676_LDO3) |
| 147 | return 0; |
| 148 | |
| 149 | ret = of_property_read_u32_array(np, "lltc,fb-voltage-divider", r, 2); |
| 150 | if (ret) { |
| 151 | dev_err(ltc3676->dev, "Failed to parse voltage divider: %d\n", |
| 152 | ret); |
| 153 | return ret; |
| 154 | } |
| 155 | |
| 156 | rdesc->min_uV = ltc3676_scale(desc->min_uV, r[0], r[1]); |
| 157 | rdesc->uV_step = ltc3676_scale(desc->uV_step, r[0], r[1]); |
| 158 | rdesc->fixed_uV = ltc3676_scale(desc->fixed_uV, r[0], r[1]); |
| 159 | |
| 160 | return 0; |
| 161 | } |
| 162 | |
| 163 | /* SW1, SW2, SW3, SW4 linear 0.8V-3.3V with scalar via R1/R2 feeback res */ |
Bhumika Goyal | f9e93ac | 2017-01-28 19:45:02 +0530 | [diff] [blame] | 164 | static const struct regulator_ops ltc3676_linear_regulator_ops = { |
Tim Harvey | 37b918a | 2016-08-15 12:40:23 -0700 | [diff] [blame] | 165 | .enable = regulator_enable_regmap, |
| 166 | .disable = regulator_disable_regmap, |
| 167 | .is_enabled = regulator_is_enabled_regmap, |
| 168 | .list_voltage = regulator_list_voltage_linear, |
| 169 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 170 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 171 | .set_suspend_voltage = ltc3676_set_suspend_voltage, |
| 172 | .set_suspend_mode = ltc3676_set_suspend_mode, |
| 173 | }; |
| 174 | |
| 175 | /* LDO1 always on fixed 0.8V-3.3V via scalar via R1/R2 feeback res */ |
Bhumika Goyal | f9e93ac | 2017-01-28 19:45:02 +0530 | [diff] [blame] | 176 | static const struct regulator_ops ltc3676_fixed_standby_regulator_ops = { |
Tim Harvey | 37b918a | 2016-08-15 12:40:23 -0700 | [diff] [blame] | 177 | }; |
| 178 | |
| 179 | /* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */ |
Bhumika Goyal | f9e93ac | 2017-01-28 19:45:02 +0530 | [diff] [blame] | 180 | static const struct regulator_ops ltc3676_fixed_regulator_ops = { |
Tim Harvey | 37b918a | 2016-08-15 12:40:23 -0700 | [diff] [blame] | 181 | .enable = regulator_enable_regmap, |
| 182 | .disable = regulator_disable_regmap, |
| 183 | .is_enabled = regulator_is_enabled_regmap, |
| 184 | }; |
| 185 | |
| 186 | #define LTC3676_REG(_id, _name, _ops, en_reg, en_bit, dvba_reg, dvb_mask) \ |
| 187 | [LTC3676_ ## _id] = { \ |
| 188 | .name = #_name, \ |
| 189 | .of_match = of_match_ptr(#_name), \ |
| 190 | .regulators_node = of_match_ptr("regulators"), \ |
| 191 | .of_parse_cb = ltc3676_of_parse_cb, \ |
| 192 | .n_voltages = (dvb_mask) + 1, \ |
| 193 | .min_uV = (dvba_reg) ? 412500 : 0, \ |
| 194 | .uV_step = (dvba_reg) ? 12500 : 0, \ |
| 195 | .ramp_delay = (dvba_reg) ? 800 : 0, \ |
| 196 | .fixed_uV = (dvb_mask) ? 0 : 725000, \ |
| 197 | .ops = <c3676_ ## _ops ## _regulator_ops, \ |
| 198 | .type = REGULATOR_VOLTAGE, \ |
| 199 | .id = LTC3676_ ## _id, \ |
| 200 | .owner = THIS_MODULE, \ |
| 201 | .vsel_reg = (dvba_reg), \ |
| 202 | .vsel_mask = (dvb_mask), \ |
| 203 | .enable_reg = (en_reg), \ |
| 204 | .enable_mask = (1 << en_bit), \ |
| 205 | } |
| 206 | |
| 207 | #define LTC3676_LINEAR_REG(_id, _name, _en, _dvba) \ |
| 208 | LTC3676_REG(_id, _name, linear, \ |
| 209 | LTC3676_ ## _en, 7, \ |
| 210 | LTC3676_ ## _dvba, 0x1f) |
| 211 | |
| 212 | #define LTC3676_FIXED_REG(_id, _name, _en_reg, _en_bit) \ |
| 213 | LTC3676_REG(_id, _name, fixed, LTC3676_ ## _en_reg, _en_bit, 0, 0) |
| 214 | |
| 215 | static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = { |
| 216 | LTC3676_LINEAR_REG(SW1, sw1, BUCK1, DVB1A), |
| 217 | LTC3676_LINEAR_REG(SW2, sw2, BUCK2, DVB2A), |
| 218 | LTC3676_LINEAR_REG(SW3, sw3, BUCK3, DVB3A), |
| 219 | LTC3676_LINEAR_REG(SW4, sw4, BUCK4, DVB4A), |
| 220 | LTC3676_REG(LDO1, ldo1, fixed_standby, 0, 0, 0, 0), |
| 221 | LTC3676_FIXED_REG(LDO2, ldo2, LDOA, 2), |
| 222 | LTC3676_FIXED_REG(LDO3, ldo3, LDOA, 5), |
| 223 | LTC3676_FIXED_REG(LDO4, ldo4, LDOB, 2), |
| 224 | }; |
| 225 | |
| 226 | static bool ltc3676_writeable_reg(struct device *dev, unsigned int reg) |
| 227 | { |
| 228 | switch (reg) { |
| 229 | case LTC3676_IRQSTAT: |
| 230 | case LTC3676_BUCK1: |
| 231 | case LTC3676_BUCK2: |
| 232 | case LTC3676_BUCK3: |
| 233 | case LTC3676_BUCK4: |
| 234 | case LTC3676_LDOA: |
| 235 | case LTC3676_LDOB: |
| 236 | case LTC3676_SQD1: |
| 237 | case LTC3676_SQD2: |
| 238 | case LTC3676_CNTRL: |
| 239 | case LTC3676_DVB1A: |
| 240 | case LTC3676_DVB1B: |
| 241 | case LTC3676_DVB2A: |
| 242 | case LTC3676_DVB2B: |
| 243 | case LTC3676_DVB3A: |
| 244 | case LTC3676_DVB3B: |
| 245 | case LTC3676_DVB4A: |
| 246 | case LTC3676_DVB4B: |
| 247 | case LTC3676_MSKIRQ: |
| 248 | case LTC3676_MSKPG: |
| 249 | case LTC3676_USER: |
| 250 | case LTC3676_HRST: |
| 251 | case LTC3676_CLIRQ: |
| 252 | return true; |
| 253 | } |
| 254 | return false; |
| 255 | } |
| 256 | |
| 257 | static bool ltc3676_readable_reg(struct device *dev, unsigned int reg) |
| 258 | { |
| 259 | switch (reg) { |
| 260 | case LTC3676_IRQSTAT: |
| 261 | case LTC3676_BUCK1: |
| 262 | case LTC3676_BUCK2: |
| 263 | case LTC3676_BUCK3: |
| 264 | case LTC3676_BUCK4: |
| 265 | case LTC3676_LDOA: |
| 266 | case LTC3676_LDOB: |
| 267 | case LTC3676_SQD1: |
| 268 | case LTC3676_SQD2: |
| 269 | case LTC3676_CNTRL: |
| 270 | case LTC3676_DVB1A: |
| 271 | case LTC3676_DVB1B: |
| 272 | case LTC3676_DVB2A: |
| 273 | case LTC3676_DVB2B: |
| 274 | case LTC3676_DVB3A: |
| 275 | case LTC3676_DVB3B: |
| 276 | case LTC3676_DVB4A: |
| 277 | case LTC3676_DVB4B: |
| 278 | case LTC3676_MSKIRQ: |
| 279 | case LTC3676_MSKPG: |
| 280 | case LTC3676_USER: |
| 281 | case LTC3676_HRST: |
| 282 | case LTC3676_CLIRQ: |
| 283 | return true; |
| 284 | } |
| 285 | return false; |
| 286 | } |
| 287 | |
| 288 | static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg) |
| 289 | { |
| 290 | switch (reg) { |
| 291 | case LTC3676_IRQSTAT: |
| 292 | case LTC3676_PGSTATL: |
| 293 | case LTC3676_PGSTATRT: |
| 294 | return true; |
| 295 | } |
| 296 | return false; |
| 297 | } |
| 298 | |
| 299 | static const struct regmap_config ltc3676_regmap_config = { |
| 300 | .reg_bits = 8, |
| 301 | .val_bits = 8, |
| 302 | .writeable_reg = ltc3676_writeable_reg, |
| 303 | .readable_reg = ltc3676_readable_reg, |
| 304 | .volatile_reg = ltc3676_volatile_reg, |
| 305 | .max_register = LTC3676_CLIRQ, |
| 306 | .use_single_rw = true, |
| 307 | .cache_type = REGCACHE_RBTREE, |
| 308 | }; |
| 309 | |
| 310 | static irqreturn_t ltc3676_isr(int irq, void *dev_id) |
| 311 | { |
| 312 | struct ltc3676 *ltc3676 = dev_id; |
| 313 | struct device *dev = ltc3676->dev; |
| 314 | unsigned int i, irqstat, event; |
| 315 | |
| 316 | regmap_read(ltc3676->regmap, LTC3676_IRQSTAT, &irqstat); |
| 317 | |
| 318 | dev_dbg(dev, "irq%d irqstat=0x%02x\n", irq, irqstat); |
| 319 | if (irqstat & LTC3676_IRQSTAT_THERMAL_WARN) { |
| 320 | dev_warn(dev, "Over-temperature Warning\n"); |
| 321 | event = REGULATOR_EVENT_OVER_TEMP; |
| 322 | for (i = 0; i < LTC3676_NUM_REGULATORS; i++) |
| 323 | regulator_notifier_call_chain(ltc3676->regulators[i], |
| 324 | event, NULL); |
| 325 | } |
| 326 | |
| 327 | if (irqstat & LTC3676_IRQSTAT_UNDERVOLT_WARN) { |
| 328 | dev_info(dev, "Undervoltage Warning\n"); |
| 329 | event = REGULATOR_EVENT_UNDER_VOLTAGE; |
| 330 | for (i = 0; i < LTC3676_NUM_REGULATORS; i++) |
| 331 | regulator_notifier_call_chain(ltc3676->regulators[i], |
| 332 | event, NULL); |
| 333 | } |
| 334 | |
| 335 | /* Clear warning condition */ |
| 336 | regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0); |
| 337 | |
| 338 | return IRQ_HANDLED; |
| 339 | } |
| 340 | |
| 341 | static int ltc3676_regulator_probe(struct i2c_client *client, |
| 342 | const struct i2c_device_id *id) |
| 343 | { |
| 344 | struct device *dev = &client->dev; |
| 345 | struct regulator_init_data *init_data = dev_get_platdata(dev); |
| 346 | struct regulator_desc *descs; |
| 347 | struct ltc3676 *ltc3676; |
| 348 | int i, ret; |
| 349 | |
| 350 | ltc3676 = devm_kzalloc(dev, sizeof(*ltc3676), GFP_KERNEL); |
| 351 | if (!ltc3676) |
| 352 | return -ENOMEM; |
| 353 | |
| 354 | i2c_set_clientdata(client, ltc3676); |
| 355 | ltc3676->dev = dev; |
| 356 | |
| 357 | descs = ltc3676->regulator_descs; |
| 358 | memcpy(descs, ltc3676_regulators, sizeof(ltc3676_regulators)); |
| 359 | descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */ |
| 360 | |
| 361 | ltc3676->regmap = devm_regmap_init_i2c(client, <c3676_regmap_config); |
| 362 | if (IS_ERR(ltc3676->regmap)) { |
| 363 | ret = PTR_ERR(ltc3676->regmap); |
| 364 | dev_err(dev, "failed to initialize regmap: %d\n", ret); |
| 365 | return ret; |
| 366 | } |
| 367 | |
| 368 | for (i = 0; i < LTC3676_NUM_REGULATORS; i++) { |
| 369 | struct regulator_desc *desc = <c3676->regulator_descs[i]; |
| 370 | struct regulator_config config = { }; |
| 371 | |
| 372 | if (init_data) |
| 373 | config.init_data = &init_data[i]; |
| 374 | |
| 375 | config.dev = dev; |
| 376 | config.driver_data = ltc3676; |
| 377 | |
| 378 | ltc3676->regulators[i] = devm_regulator_register(dev, desc, |
| 379 | &config); |
| 380 | if (IS_ERR(ltc3676->regulators[i])) { |
| 381 | ret = PTR_ERR(ltc3676->regulators[i]); |
| 382 | dev_err(dev, "failed to register regulator %s: %d\n", |
| 383 | desc->name, ret); |
| 384 | return ret; |
| 385 | } |
| 386 | } |
| 387 | |
| 388 | regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0); |
| 389 | if (client->irq) { |
| 390 | ret = devm_request_threaded_irq(dev, client->irq, NULL, |
| 391 | ltc3676_isr, |
| 392 | IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| 393 | client->name, ltc3676); |
| 394 | if (ret) { |
| 395 | dev_err(dev, "Failed to request IRQ: %d\n", ret); |
| 396 | return ret; |
| 397 | } |
| 398 | } |
| 399 | |
| 400 | return 0; |
| 401 | } |
| 402 | |
| 403 | static const struct i2c_device_id ltc3676_i2c_id[] = { |
| 404 | { "ltc3676" }, |
| 405 | { } |
| 406 | }; |
| 407 | MODULE_DEVICE_TABLE(i2c, ltc3676_i2c_id); |
| 408 | |
Javier Martinez Canillas | c314341 | 2017-02-21 11:29:05 -0300 | [diff] [blame] | 409 | static const struct of_device_id ltc3676_of_match[] = { |
| 410 | { .compatible = "lltc,ltc3676" }, |
| 411 | { }, |
| 412 | }; |
| 413 | MODULE_DEVICE_TABLE(of, ltc3676_of_match); |
| 414 | |
Tim Harvey | 37b918a | 2016-08-15 12:40:23 -0700 | [diff] [blame] | 415 | static struct i2c_driver ltc3676_driver = { |
| 416 | .driver = { |
| 417 | .name = DRIVER_NAME, |
Javier Martinez Canillas | c314341 | 2017-02-21 11:29:05 -0300 | [diff] [blame] | 418 | .of_match_table = of_match_ptr(ltc3676_of_match), |
Tim Harvey | 37b918a | 2016-08-15 12:40:23 -0700 | [diff] [blame] | 419 | }, |
| 420 | .probe = ltc3676_regulator_probe, |
| 421 | .id_table = ltc3676_i2c_id, |
| 422 | }; |
| 423 | module_i2c_driver(ltc3676_driver); |
| 424 | |
| 425 | MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>"); |
| 426 | MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC1376"); |
| 427 | MODULE_LICENSE("GPL v2"); |