blob: 1b0eebf84f76e43432c75ca9d0c09635ecbfa00a [file] [log] [blame]
Yevgeny Petrilinc27a02c2008-10-22 15:47:49 -07001/*
2 * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
3 *
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
9 *
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
12 * conditions are met:
13 *
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
16 * disclaimer.
17 *
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
22 *
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30 * SOFTWARE.
31 *
32 */
33
34#include <linux/cpumask.h>
35#include <linux/module.h>
36#include <linux/delay.h>
37#include <linux/netdevice.h>
38#include <linux/cpumask.h>
39
40#include <linux/mlx4/driver.h>
41#include <linux/mlx4/device.h>
42#include <linux/mlx4/cmd.h>
43
44#include "mlx4_en.h"
45
46MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin");
47MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver");
48MODULE_LICENSE("Dual BSD/GPL");
49MODULE_VERSION(DRV_VERSION " ("DRV_RELDATE")");
50
51static const char mlx4_en_version[] =
52 DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v"
53 DRV_VERSION " (" DRV_RELDATE ")\n";
54
55static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr,
56 enum mlx4_dev_event event, int port)
57{
58 struct mlx4_en_dev *mdev = (struct mlx4_en_dev *) endev_ptr;
59 struct mlx4_en_priv *priv;
60
61 if (!mdev->pndev[port])
62 return;
63
64 priv = netdev_priv(mdev->pndev[port]);
65 switch (event) {
66 case MLX4_DEV_EVENT_PORT_UP:
67 case MLX4_DEV_EVENT_PORT_DOWN:
68 /* To prevent races, we poll the link state in a separate
69 task rather than changing it here */
70 priv->link_state = event;
71 queue_work(mdev->workqueue, &priv->linkstate_task);
72 break;
73
74 case MLX4_DEV_EVENT_CATASTROPHIC_ERROR:
75 mlx4_err(mdev, "Internal error detected, restarting device\n");
76 break;
77
78 default:
79 mlx4_warn(mdev, "Unhandled event: %d\n", event);
80 }
81}
82
83static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr)
84{
85 struct mlx4_en_dev *mdev = endev_ptr;
86 int i;
87
88 mutex_lock(&mdev->state_lock);
89 mdev->device_up = false;
90 mutex_unlock(&mdev->state_lock);
91
92 mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
93 if (mdev->pndev[i])
94 mlx4_en_destroy_netdev(mdev->pndev[i]);
95
96 flush_workqueue(mdev->workqueue);
97 destroy_workqueue(mdev->workqueue);
98 mlx4_mr_free(dev, &mdev->mr);
99 mlx4_uar_free(dev, &mdev->priv_uar);
100 mlx4_pd_free(dev, mdev->priv_pdn);
101 kfree(mdev);
102}
103
104static void *mlx4_en_add(struct mlx4_dev *dev)
105{
106 static int mlx4_en_version_printed;
107 struct mlx4_en_dev *mdev;
108 int i;
109 int err;
110
111 if (!mlx4_en_version_printed) {
112 printk(KERN_INFO "%s", mlx4_en_version);
113 mlx4_en_version_printed++;
114 }
115
116 mdev = kzalloc(sizeof *mdev, GFP_KERNEL);
117 if (!mdev) {
118 dev_err(&dev->pdev->dev, "Device struct alloc failed, "
119 "aborting.\n");
120 err = -ENOMEM;
121 goto err_free_res;
122 }
123
124 if (mlx4_pd_alloc(dev, &mdev->priv_pdn))
125 goto err_free_dev;
126
127 if (mlx4_uar_alloc(dev, &mdev->priv_uar))
128 goto err_pd;
129
130 mdev->uar_map = ioremap(mdev->priv_uar.pfn << PAGE_SHIFT, PAGE_SIZE);
131 if (!mdev->uar_map)
132 goto err_uar;
133 spin_lock_init(&mdev->uar_lock);
134
135 mdev->dev = dev;
136 mdev->dma_device = &(dev->pdev->dev);
137 mdev->pdev = dev->pdev;
138 mdev->device_up = false;
139
140 mdev->LSO_support = !!(dev->caps.flags & (1 << 15));
141 if (!mdev->LSO_support)
142 mlx4_warn(mdev, "LSO not supported, please upgrade to later "
143 "FW version to enable LSO\n");
144
145 if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull,
146 MLX4_PERM_LOCAL_WRITE | MLX4_PERM_LOCAL_READ,
147 0, 0, &mdev->mr)) {
148 mlx4_err(mdev, "Failed allocating memory region\n");
149 goto err_uar;
150 }
151 if (mlx4_mr_enable(mdev->dev, &mdev->mr)) {
152 mlx4_err(mdev, "Failed enabling memory region\n");
153 goto err_mr;
154 }
155
156 /* Build device profile according to supplied module parameters */
157 err = mlx4_en_get_profile(mdev);
158 if (err) {
159 mlx4_err(mdev, "Bad module parameters, aborting.\n");
160 goto err_mr;
161 }
162
163 /* Configure wich ports to start according to module parameters */
164 mdev->port_cnt = 0;
165 mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
166 mdev->port_cnt++;
167
168 /* If we did not receive an explicit number of Rx rings, default to
169 * the number of completion vectors populated by the mlx4_core */
170 mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
171 mlx4_info(mdev, "Using %d tx rings for port:%d\n",
172 mdev->profile.prof[i].tx_ring_num, i);
173 if (!mdev->profile.prof[i].rx_ring_num) {
174 mdev->profile.prof[i].rx_ring_num = 1;
175 mlx4_info(mdev, "Defaulting to %d rx rings for port:%d\n",
176 1, i);
177 } else
178 mlx4_info(mdev, "Using %d rx rings for port:%d\n",
179 mdev->profile.prof[i].rx_ring_num, i);
180 }
181
182 /* Create our own workqueue for reset/multicast tasks
183 * Note: we cannot use the shared workqueue because of deadlocks caused
184 * by the rtnl lock */
185 mdev->workqueue = create_singlethread_workqueue("mlx4_en");
186 if (!mdev->workqueue) {
187 err = -ENOMEM;
188 goto err_close_nic;
189 }
190
191 /* At this stage all non-port specific tasks are complete:
192 * mark the card state as up */
193 mutex_init(&mdev->state_lock);
194 mdev->device_up = true;
195
196 /* Setup ports */
197
198 /* Create a netdev for each port */
199 mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
200 mlx4_info(mdev, "Activating port:%d\n", i);
201 if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i])) {
202 mdev->pndev[i] = NULL;
203 goto err_free_netdev;
204 }
205 }
206 return mdev;
207
208
209err_free_netdev:
210 mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
211 if (mdev->pndev[i])
212 mlx4_en_destroy_netdev(mdev->pndev[i]);
213 }
214
215 mutex_lock(&mdev->state_lock);
216 mdev->device_up = false;
217 mutex_unlock(&mdev->state_lock);
218 flush_workqueue(mdev->workqueue);
219
220 /* Stop event queue before we drop down to release shared SW state */
221
222err_close_nic:
223 destroy_workqueue(mdev->workqueue);
224err_mr:
225 mlx4_mr_free(dev, &mdev->mr);
226err_uar:
227 mlx4_uar_free(dev, &mdev->priv_uar);
228err_pd:
229 mlx4_pd_free(dev, mdev->priv_pdn);
230err_free_dev:
231 kfree(mdev);
232err_free_res:
233 return NULL;
234}
235
236static struct mlx4_interface mlx4_en_interface = {
237 .add = mlx4_en_add,
238 .remove = mlx4_en_remove,
239 .event = mlx4_en_event,
240};
241
242static int __init mlx4_en_init(void)
243{
244 return mlx4_register_interface(&mlx4_en_interface);
245}
246
247static void __exit mlx4_en_cleanup(void)
248{
249 mlx4_unregister_interface(&mlx4_en_interface);
250}
251
252module_init(mlx4_en_init);
253module_exit(mlx4_en_cleanup);
254