David Collins | 46fc033 | 2018-07-13 18:50:59 -0700 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | // Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| 3 | |
| 4 | #define pr_fmt(fmt) "%s: " fmt, __func__ |
| 5 | |
| 6 | #include <linux/err.h> |
| 7 | #include <linux/kernel.h> |
| 8 | #include <linux/module.h> |
| 9 | #include <linux/of.h> |
| 10 | #include <linux/of_device.h> |
| 11 | #include <linux/platform_device.h> |
| 12 | #include <linux/slab.h> |
| 13 | #include <linux/string.h> |
| 14 | #include <linux/regulator/driver.h> |
| 15 | #include <linux/regulator/machine.h> |
| 16 | #include <linux/regulator/of_regulator.h> |
| 17 | |
| 18 | #include <soc/qcom/cmd-db.h> |
| 19 | #include <soc/qcom/rpmh.h> |
| 20 | |
| 21 | #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| 22 | |
| 23 | /** |
| 24 | * enum rpmh_regulator_type - supported RPMh accelerator types |
| 25 | * %VRM: RPMh VRM accelerator which supports voting on enable, voltage, |
| 26 | * and mode of LDO, SMPS, and BOB type PMIC regulators. |
| 27 | * %XOB: RPMh XOB accelerator which supports voting on the enable state |
| 28 | * of PMIC regulators. |
| 29 | */ |
| 30 | enum rpmh_regulator_type { |
| 31 | VRM, |
| 32 | XOB, |
| 33 | }; |
| 34 | |
| 35 | #define RPMH_REGULATOR_REG_VRM_VOLTAGE 0x0 |
| 36 | #define RPMH_REGULATOR_REG_ENABLE 0x4 |
| 37 | #define RPMH_REGULATOR_REG_VRM_MODE 0x8 |
| 38 | |
| 39 | #define PMIC4_LDO_MODE_RETENTION 4 |
| 40 | #define PMIC4_LDO_MODE_LPM 5 |
| 41 | #define PMIC4_LDO_MODE_HPM 7 |
| 42 | |
| 43 | #define PMIC4_SMPS_MODE_RETENTION 4 |
| 44 | #define PMIC4_SMPS_MODE_PFM 5 |
| 45 | #define PMIC4_SMPS_MODE_AUTO 6 |
| 46 | #define PMIC4_SMPS_MODE_PWM 7 |
| 47 | |
| 48 | #define PMIC4_BOB_MODE_PASS 0 |
| 49 | #define PMIC4_BOB_MODE_PFM 1 |
| 50 | #define PMIC4_BOB_MODE_AUTO 2 |
| 51 | #define PMIC4_BOB_MODE_PWM 3 |
| 52 | |
| 53 | /** |
| 54 | * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations |
| 55 | * @regulator_type: RPMh accelerator type used to manage this |
| 56 | * regulator |
| 57 | * @ops: Pointer to regulator ops callback structure |
| 58 | * @voltage_range: The single range of voltages supported by this |
| 59 | * PMIC regulator type |
| 60 | * @n_voltages: The number of unique voltage set points defined |
| 61 | * by voltage_range |
| 62 | * @hpm_min_load_uA: Minimum load current in microamps that requires |
| 63 | * high power mode (HPM) operation. This is used |
| 64 | * for LDO hardware type regulators only. |
| 65 | * @pmic_mode_map: Array indexed by regulator framework mode |
| 66 | * containing PMIC hardware modes. Must be large |
| 67 | * enough to index all framework modes supported |
| 68 | * by this regulator hardware type. |
| 69 | * @of_map_mode: Maps an RPMH_REGULATOR_MODE_* mode value defined |
| 70 | * in device tree to a regulator framework mode |
| 71 | */ |
| 72 | struct rpmh_vreg_hw_data { |
| 73 | enum rpmh_regulator_type regulator_type; |
| 74 | const struct regulator_ops *ops; |
| 75 | const struct regulator_linear_range voltage_range; |
| 76 | int n_voltages; |
| 77 | int hpm_min_load_uA; |
| 78 | const int *pmic_mode_map; |
| 79 | unsigned int (*of_map_mode)(unsigned int mode); |
| 80 | }; |
| 81 | |
| 82 | /** |
| 83 | * struct rpmh_vreg - individual RPMh regulator data structure encapsulating a |
| 84 | * single regulator device |
| 85 | * @dev: Device pointer for the top-level PMIC RPMh |
| 86 | * regulator parent device. This is used as a |
| 87 | * handle in RPMh write requests. |
| 88 | * @addr: Base address of the regulator resource within |
| 89 | * an RPMh accelerator |
| 90 | * @rdesc: Regulator descriptor |
| 91 | * @hw_data: PMIC regulator configuration data for this RPMh |
| 92 | * regulator |
| 93 | * @always_wait_for_ack: Boolean flag indicating if a request must always |
| 94 | * wait for an ACK from RPMh before continuing even |
| 95 | * if it corresponds to a strictly lower power |
| 96 | * state (e.g. enabled --> disabled). |
| 97 | * @enabled: Flag indicating if the regulator is enabled or |
| 98 | * not |
| 99 | * @bypassed: Boolean indicating if the regulator is in |
| 100 | * bypass (pass-through) mode or not. This is |
| 101 | * only used by BOB rpmh-regulator resources. |
| 102 | * @voltage_selector: Selector used for get_voltage_sel() and |
| 103 | * set_voltage_sel() callbacks |
| 104 | * @mode: RPMh VRM regulator current framework mode |
| 105 | */ |
| 106 | struct rpmh_vreg { |
| 107 | struct device *dev; |
| 108 | u32 addr; |
| 109 | struct regulator_desc rdesc; |
| 110 | const struct rpmh_vreg_hw_data *hw_data; |
| 111 | bool always_wait_for_ack; |
| 112 | |
| 113 | int enabled; |
| 114 | bool bypassed; |
| 115 | int voltage_selector; |
| 116 | unsigned int mode; |
| 117 | }; |
| 118 | |
| 119 | /** |
| 120 | * struct rpmh_vreg_init_data - initialization data for an RPMh regulator |
| 121 | * @name: Name for the regulator which also corresponds |
| 122 | * to the device tree subnode name of the regulator |
| 123 | * @resource_name: RPMh regulator resource name format string. |
| 124 | * This must include exactly one field: '%s' which |
| 125 | * is filled at run-time with the PMIC ID provided |
| 126 | * by device tree property qcom,pmic-id. Example: |
| 127 | * "ldo%s1" for RPMh resource "ldoa1". |
| 128 | * @supply_name: Parent supply regulator name |
| 129 | * @hw_data: Configuration data for this PMIC regulator type |
| 130 | */ |
| 131 | struct rpmh_vreg_init_data { |
| 132 | const char *name; |
| 133 | const char *resource_name; |
| 134 | const char *supply_name; |
| 135 | const struct rpmh_vreg_hw_data *hw_data; |
| 136 | }; |
| 137 | |
| 138 | /** |
| 139 | * rpmh_regulator_send_request() - send the request to RPMh |
| 140 | * @vreg: Pointer to the RPMh regulator |
| 141 | * @cmd: Pointer to the RPMh command to send |
| 142 | * @wait_for_ack: Boolean indicating if execution must wait until the |
| 143 | * request has been acknowledged as complete |
| 144 | * |
| 145 | * Return: 0 on success, errno on failure |
| 146 | */ |
| 147 | static int rpmh_regulator_send_request(struct rpmh_vreg *vreg, |
| 148 | struct tcs_cmd *cmd, bool wait_for_ack) |
| 149 | { |
| 150 | int ret; |
| 151 | |
| 152 | if (wait_for_ack || vreg->always_wait_for_ack) |
| 153 | ret = rpmh_write(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd, 1); |
| 154 | else |
| 155 | ret = rpmh_write_async(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd, |
| 156 | 1); |
| 157 | |
| 158 | return ret; |
| 159 | } |
| 160 | |
| 161 | static int _rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev, |
| 162 | unsigned int selector, bool wait_for_ack) |
| 163 | { |
| 164 | struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); |
| 165 | struct tcs_cmd cmd = { |
| 166 | .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_VOLTAGE, |
| 167 | }; |
| 168 | int ret; |
| 169 | |
| 170 | /* VRM voltage control register is set with voltage in millivolts. */ |
| 171 | cmd.data = DIV_ROUND_UP(regulator_list_voltage_linear_range(rdev, |
| 172 | selector), 1000); |
| 173 | |
| 174 | ret = rpmh_regulator_send_request(vreg, &cmd, wait_for_ack); |
| 175 | if (!ret) |
| 176 | vreg->voltage_selector = selector; |
| 177 | |
| 178 | return ret; |
| 179 | } |
| 180 | |
| 181 | static int rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev, |
| 182 | unsigned int selector) |
| 183 | { |
| 184 | struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); |
| 185 | |
| 186 | if (vreg->enabled == -EINVAL) { |
| 187 | /* |
| 188 | * Cache the voltage and send it later when the regulator is |
| 189 | * enabled or disabled. |
| 190 | */ |
| 191 | vreg->voltage_selector = selector; |
| 192 | return 0; |
| 193 | } |
| 194 | |
| 195 | return _rpmh_regulator_vrm_set_voltage_sel(rdev, selector, |
| 196 | selector > vreg->voltage_selector); |
| 197 | } |
| 198 | |
| 199 | static int rpmh_regulator_vrm_get_voltage_sel(struct regulator_dev *rdev) |
| 200 | { |
| 201 | struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); |
| 202 | |
| 203 | return vreg->voltage_selector; |
| 204 | } |
| 205 | |
| 206 | static int rpmh_regulator_is_enabled(struct regulator_dev *rdev) |
| 207 | { |
| 208 | struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); |
| 209 | |
| 210 | return vreg->enabled; |
| 211 | } |
| 212 | |
| 213 | static int rpmh_regulator_set_enable_state(struct regulator_dev *rdev, |
| 214 | bool enable) |
| 215 | { |
| 216 | struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); |
| 217 | struct tcs_cmd cmd = { |
| 218 | .addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE, |
| 219 | .data = enable, |
| 220 | }; |
| 221 | int ret; |
| 222 | |
| 223 | if (vreg->enabled == -EINVAL && |
| 224 | vreg->voltage_selector != -ENOTRECOVERABLE) { |
| 225 | ret = _rpmh_regulator_vrm_set_voltage_sel(rdev, |
| 226 | vreg->voltage_selector, true); |
| 227 | if (ret < 0) |
| 228 | return ret; |
| 229 | } |
| 230 | |
| 231 | ret = rpmh_regulator_send_request(vreg, &cmd, enable); |
| 232 | if (!ret) |
| 233 | vreg->enabled = enable; |
| 234 | |
| 235 | return ret; |
| 236 | } |
| 237 | |
| 238 | static int rpmh_regulator_enable(struct regulator_dev *rdev) |
| 239 | { |
| 240 | return rpmh_regulator_set_enable_state(rdev, true); |
| 241 | } |
| 242 | |
| 243 | static int rpmh_regulator_disable(struct regulator_dev *rdev) |
| 244 | { |
| 245 | return rpmh_regulator_set_enable_state(rdev, false); |
| 246 | } |
| 247 | |
| 248 | static int rpmh_regulator_vrm_set_mode_bypass(struct rpmh_vreg *vreg, |
| 249 | unsigned int mode, bool bypassed) |
| 250 | { |
| 251 | struct tcs_cmd cmd = { |
| 252 | .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_MODE, |
| 253 | }; |
| 254 | int pmic_mode; |
| 255 | |
| 256 | if (mode > REGULATOR_MODE_STANDBY) |
| 257 | return -EINVAL; |
| 258 | |
| 259 | pmic_mode = vreg->hw_data->pmic_mode_map[mode]; |
| 260 | if (pmic_mode < 0) |
| 261 | return pmic_mode; |
| 262 | |
| 263 | if (bypassed) |
| 264 | cmd.data = PMIC4_BOB_MODE_PASS; |
| 265 | else |
| 266 | cmd.data = pmic_mode; |
| 267 | |
| 268 | return rpmh_regulator_send_request(vreg, &cmd, true); |
| 269 | } |
| 270 | |
| 271 | static int rpmh_regulator_vrm_set_mode(struct regulator_dev *rdev, |
| 272 | unsigned int mode) |
| 273 | { |
| 274 | struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); |
| 275 | int ret; |
| 276 | |
| 277 | if (mode == vreg->mode) |
| 278 | return 0; |
| 279 | |
| 280 | ret = rpmh_regulator_vrm_set_mode_bypass(vreg, mode, vreg->bypassed); |
| 281 | if (!ret) |
| 282 | vreg->mode = mode; |
| 283 | |
| 284 | return ret; |
| 285 | } |
| 286 | |
| 287 | static unsigned int rpmh_regulator_vrm_get_mode(struct regulator_dev *rdev) |
| 288 | { |
| 289 | struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); |
| 290 | |
| 291 | return vreg->mode; |
| 292 | } |
| 293 | |
| 294 | /** |
| 295 | * rpmh_regulator_vrm_set_load() - set the regulator mode based upon the load |
| 296 | * current requested |
| 297 | * @rdev: Regulator device pointer for the rpmh-regulator |
| 298 | * @load_uA: Aggregated load current in microamps |
| 299 | * |
| 300 | * This function is used in the regulator_ops for VRM type RPMh regulator |
| 301 | * devices. |
| 302 | * |
| 303 | * Return: 0 on success, errno on failure |
| 304 | */ |
| 305 | static int rpmh_regulator_vrm_set_load(struct regulator_dev *rdev, int load_uA) |
| 306 | { |
| 307 | struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); |
| 308 | unsigned int mode; |
| 309 | |
| 310 | if (load_uA >= vreg->hw_data->hpm_min_load_uA) |
| 311 | mode = REGULATOR_MODE_NORMAL; |
| 312 | else |
| 313 | mode = REGULATOR_MODE_IDLE; |
| 314 | |
| 315 | return rpmh_regulator_vrm_set_mode(rdev, mode); |
| 316 | } |
| 317 | |
| 318 | static int rpmh_regulator_vrm_set_bypass(struct regulator_dev *rdev, |
| 319 | bool enable) |
| 320 | { |
| 321 | struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); |
| 322 | int ret; |
| 323 | |
| 324 | if (vreg->bypassed == enable) |
| 325 | return 0; |
| 326 | |
| 327 | ret = rpmh_regulator_vrm_set_mode_bypass(vreg, vreg->mode, enable); |
| 328 | if (!ret) |
| 329 | vreg->bypassed = enable; |
| 330 | |
| 331 | return ret; |
| 332 | } |
| 333 | |
| 334 | static int rpmh_regulator_vrm_get_bypass(struct regulator_dev *rdev, |
| 335 | bool *enable) |
| 336 | { |
| 337 | struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); |
| 338 | |
| 339 | *enable = vreg->bypassed; |
| 340 | |
| 341 | return 0; |
| 342 | } |
| 343 | |
| 344 | static const struct regulator_ops rpmh_regulator_vrm_ops = { |
| 345 | .enable = rpmh_regulator_enable, |
| 346 | .disable = rpmh_regulator_disable, |
| 347 | .is_enabled = rpmh_regulator_is_enabled, |
| 348 | .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel, |
| 349 | .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel, |
| 350 | .list_voltage = regulator_list_voltage_linear_range, |
| 351 | .set_mode = rpmh_regulator_vrm_set_mode, |
| 352 | .get_mode = rpmh_regulator_vrm_get_mode, |
| 353 | }; |
| 354 | |
| 355 | static const struct regulator_ops rpmh_regulator_vrm_drms_ops = { |
| 356 | .enable = rpmh_regulator_enable, |
| 357 | .disable = rpmh_regulator_disable, |
| 358 | .is_enabled = rpmh_regulator_is_enabled, |
| 359 | .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel, |
| 360 | .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel, |
| 361 | .list_voltage = regulator_list_voltage_linear_range, |
| 362 | .set_mode = rpmh_regulator_vrm_set_mode, |
| 363 | .get_mode = rpmh_regulator_vrm_get_mode, |
| 364 | .set_load = rpmh_regulator_vrm_set_load, |
| 365 | }; |
| 366 | |
| 367 | static const struct regulator_ops rpmh_regulator_vrm_bypass_ops = { |
| 368 | .enable = rpmh_regulator_enable, |
| 369 | .disable = rpmh_regulator_disable, |
| 370 | .is_enabled = rpmh_regulator_is_enabled, |
| 371 | .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel, |
| 372 | .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel, |
| 373 | .list_voltage = regulator_list_voltage_linear_range, |
| 374 | .set_mode = rpmh_regulator_vrm_set_mode, |
| 375 | .get_mode = rpmh_regulator_vrm_get_mode, |
| 376 | .set_bypass = rpmh_regulator_vrm_set_bypass, |
| 377 | .get_bypass = rpmh_regulator_vrm_get_bypass, |
| 378 | }; |
| 379 | |
| 380 | static const struct regulator_ops rpmh_regulator_xob_ops = { |
| 381 | .enable = rpmh_regulator_enable, |
| 382 | .disable = rpmh_regulator_disable, |
| 383 | .is_enabled = rpmh_regulator_is_enabled, |
| 384 | }; |
| 385 | |
| 386 | /** |
| 387 | * rpmh_regulator_init_vreg() - initialize all attributes of an rpmh-regulator |
| 388 | * vreg: Pointer to the individual rpmh-regulator resource |
| 389 | * dev: Pointer to the top level rpmh-regulator PMIC device |
| 390 | * node: Pointer to the individual rpmh-regulator resource |
| 391 | * device node |
| 392 | * pmic_id: String used to identify the top level rpmh-regulator |
| 393 | * PMIC device on the board |
| 394 | * pmic_rpmh_data: Pointer to a null-terminated array of rpmh-regulator |
| 395 | * resources defined for the top level PMIC device |
| 396 | * |
| 397 | * Return: 0 on success, errno on failure |
| 398 | */ |
| 399 | static int rpmh_regulator_init_vreg(struct rpmh_vreg *vreg, struct device *dev, |
| 400 | struct device_node *node, const char *pmic_id, |
| 401 | const struct rpmh_vreg_init_data *pmic_rpmh_data) |
| 402 | { |
| 403 | struct regulator_config reg_config = {}; |
| 404 | char rpmh_resource_name[20] = ""; |
| 405 | const struct rpmh_vreg_init_data *rpmh_data; |
| 406 | struct regulator_init_data *init_data; |
| 407 | struct regulator_dev *rdev; |
| 408 | int ret; |
| 409 | |
| 410 | vreg->dev = dev; |
| 411 | |
| 412 | for (rpmh_data = pmic_rpmh_data; rpmh_data->name; rpmh_data++) |
| 413 | if (!strcmp(rpmh_data->name, node->name)) |
| 414 | break; |
| 415 | |
| 416 | if (!rpmh_data->name) { |
| 417 | dev_err(dev, "Unknown regulator %s\n", node->name); |
| 418 | return -EINVAL; |
| 419 | } |
| 420 | |
| 421 | scnprintf(rpmh_resource_name, sizeof(rpmh_resource_name), |
| 422 | rpmh_data->resource_name, pmic_id); |
| 423 | |
| 424 | vreg->addr = cmd_db_read_addr(rpmh_resource_name); |
| 425 | if (!vreg->addr) { |
| 426 | dev_err(dev, "%s: could not find RPMh address for resource %s\n", |
| 427 | node->name, rpmh_resource_name); |
| 428 | return -ENODEV; |
| 429 | } |
| 430 | |
| 431 | vreg->rdesc.name = rpmh_data->name; |
| 432 | vreg->rdesc.supply_name = rpmh_data->supply_name; |
| 433 | vreg->hw_data = rpmh_data->hw_data; |
| 434 | |
| 435 | vreg->enabled = -EINVAL; |
| 436 | vreg->voltage_selector = -ENOTRECOVERABLE; |
| 437 | vreg->mode = REGULATOR_MODE_INVALID; |
| 438 | |
| 439 | if (rpmh_data->hw_data->n_voltages) { |
| 440 | vreg->rdesc.linear_ranges = &rpmh_data->hw_data->voltage_range; |
| 441 | vreg->rdesc.n_linear_ranges = 1; |
| 442 | vreg->rdesc.n_voltages = rpmh_data->hw_data->n_voltages; |
| 443 | } |
| 444 | |
| 445 | vreg->always_wait_for_ack = of_property_read_bool(node, |
| 446 | "qcom,always-wait-for-ack"); |
| 447 | |
| 448 | vreg->rdesc.owner = THIS_MODULE; |
| 449 | vreg->rdesc.type = REGULATOR_VOLTAGE; |
| 450 | vreg->rdesc.ops = vreg->hw_data->ops; |
| 451 | vreg->rdesc.of_map_mode = vreg->hw_data->of_map_mode; |
| 452 | |
| 453 | init_data = of_get_regulator_init_data(dev, node, &vreg->rdesc); |
| 454 | if (!init_data) |
| 455 | return -ENOMEM; |
| 456 | |
| 457 | if (rpmh_data->hw_data->regulator_type == XOB && |
| 458 | init_data->constraints.min_uV && |
| 459 | init_data->constraints.min_uV == init_data->constraints.max_uV) { |
| 460 | vreg->rdesc.fixed_uV = init_data->constraints.min_uV; |
| 461 | vreg->rdesc.n_voltages = 1; |
| 462 | } |
| 463 | |
| 464 | reg_config.dev = dev; |
| 465 | reg_config.init_data = init_data; |
| 466 | reg_config.of_node = node; |
| 467 | reg_config.driver_data = vreg; |
| 468 | |
| 469 | rdev = devm_regulator_register(dev, &vreg->rdesc, ®_config); |
| 470 | if (IS_ERR(rdev)) { |
| 471 | ret = PTR_ERR(rdev); |
| 472 | dev_err(dev, "%s: devm_regulator_register() failed, ret=%d\n", |
| 473 | node->name, ret); |
| 474 | return ret; |
| 475 | } |
| 476 | |
| 477 | dev_dbg(dev, "%s regulator registered for RPMh resource %s @ 0x%05X\n", |
| 478 | node->name, rpmh_resource_name, vreg->addr); |
| 479 | |
| 480 | return 0; |
| 481 | } |
| 482 | |
| 483 | static const int pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = { |
| 484 | [REGULATOR_MODE_INVALID] = -EINVAL, |
| 485 | [REGULATOR_MODE_STANDBY] = PMIC4_LDO_MODE_RETENTION, |
| 486 | [REGULATOR_MODE_IDLE] = PMIC4_LDO_MODE_LPM, |
| 487 | [REGULATOR_MODE_NORMAL] = PMIC4_LDO_MODE_HPM, |
| 488 | [REGULATOR_MODE_FAST] = -EINVAL, |
| 489 | }; |
| 490 | |
| 491 | static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode) |
| 492 | { |
| 493 | unsigned int mode; |
| 494 | |
| 495 | switch (rpmh_mode) { |
| 496 | case RPMH_REGULATOR_MODE_HPM: |
| 497 | mode = REGULATOR_MODE_NORMAL; |
| 498 | break; |
| 499 | case RPMH_REGULATOR_MODE_LPM: |
| 500 | mode = REGULATOR_MODE_IDLE; |
| 501 | break; |
| 502 | case RPMH_REGULATOR_MODE_RET: |
| 503 | mode = REGULATOR_MODE_STANDBY; |
| 504 | break; |
| 505 | default: |
| 506 | mode = REGULATOR_MODE_INVALID; |
| 507 | } |
| 508 | |
| 509 | return mode; |
| 510 | } |
| 511 | |
| 512 | static const int pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = { |
| 513 | [REGULATOR_MODE_INVALID] = -EINVAL, |
| 514 | [REGULATOR_MODE_STANDBY] = PMIC4_SMPS_MODE_RETENTION, |
| 515 | [REGULATOR_MODE_IDLE] = PMIC4_SMPS_MODE_PFM, |
| 516 | [REGULATOR_MODE_NORMAL] = PMIC4_SMPS_MODE_AUTO, |
| 517 | [REGULATOR_MODE_FAST] = PMIC4_SMPS_MODE_PWM, |
| 518 | }; |
| 519 | |
| 520 | static unsigned int |
| 521 | rpmh_regulator_pmic4_smps_of_map_mode(unsigned int rpmh_mode) |
| 522 | { |
| 523 | unsigned int mode; |
| 524 | |
| 525 | switch (rpmh_mode) { |
| 526 | case RPMH_REGULATOR_MODE_HPM: |
| 527 | mode = REGULATOR_MODE_FAST; |
| 528 | break; |
| 529 | case RPMH_REGULATOR_MODE_AUTO: |
| 530 | mode = REGULATOR_MODE_NORMAL; |
| 531 | break; |
| 532 | case RPMH_REGULATOR_MODE_LPM: |
| 533 | mode = REGULATOR_MODE_IDLE; |
| 534 | break; |
| 535 | case RPMH_REGULATOR_MODE_RET: |
| 536 | mode = REGULATOR_MODE_STANDBY; |
| 537 | break; |
| 538 | default: |
| 539 | mode = REGULATOR_MODE_INVALID; |
| 540 | } |
| 541 | |
| 542 | return mode; |
| 543 | } |
| 544 | |
| 545 | static const int pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = { |
| 546 | [REGULATOR_MODE_INVALID] = -EINVAL, |
| 547 | [REGULATOR_MODE_STANDBY] = -EINVAL, |
| 548 | [REGULATOR_MODE_IDLE] = PMIC4_BOB_MODE_PFM, |
| 549 | [REGULATOR_MODE_NORMAL] = PMIC4_BOB_MODE_AUTO, |
| 550 | [REGULATOR_MODE_FAST] = PMIC4_BOB_MODE_PWM, |
| 551 | }; |
| 552 | |
| 553 | static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode) |
| 554 | { |
| 555 | unsigned int mode; |
| 556 | |
| 557 | switch (rpmh_mode) { |
| 558 | case RPMH_REGULATOR_MODE_HPM: |
| 559 | mode = REGULATOR_MODE_FAST; |
| 560 | break; |
| 561 | case RPMH_REGULATOR_MODE_AUTO: |
| 562 | mode = REGULATOR_MODE_NORMAL; |
| 563 | break; |
| 564 | case RPMH_REGULATOR_MODE_LPM: |
| 565 | mode = REGULATOR_MODE_IDLE; |
| 566 | break; |
| 567 | default: |
| 568 | mode = REGULATOR_MODE_INVALID; |
| 569 | } |
| 570 | |
| 571 | return mode; |
| 572 | } |
| 573 | |
| 574 | static const struct rpmh_vreg_hw_data pmic4_pldo = { |
| 575 | .regulator_type = VRM, |
| 576 | .ops = &rpmh_regulator_vrm_drms_ops, |
| 577 | .voltage_range = REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000), |
| 578 | .n_voltages = 256, |
| 579 | .hpm_min_load_uA = 10000, |
| 580 | .pmic_mode_map = pmic_mode_map_pmic4_ldo, |
| 581 | .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode, |
| 582 | }; |
| 583 | |
| 584 | static const struct rpmh_vreg_hw_data pmic4_pldo_lv = { |
| 585 | .regulator_type = VRM, |
| 586 | .ops = &rpmh_regulator_vrm_drms_ops, |
| 587 | .voltage_range = REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000), |
| 588 | .n_voltages = 128, |
| 589 | .hpm_min_load_uA = 10000, |
| 590 | .pmic_mode_map = pmic_mode_map_pmic4_ldo, |
| 591 | .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode, |
| 592 | }; |
| 593 | |
| 594 | static const struct rpmh_vreg_hw_data pmic4_nldo = { |
| 595 | .regulator_type = VRM, |
| 596 | .ops = &rpmh_regulator_vrm_drms_ops, |
| 597 | .voltage_range = REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), |
| 598 | .n_voltages = 128, |
| 599 | .hpm_min_load_uA = 30000, |
| 600 | .pmic_mode_map = pmic_mode_map_pmic4_ldo, |
| 601 | .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode, |
| 602 | }; |
| 603 | |
| 604 | static const struct rpmh_vreg_hw_data pmic4_hfsmps3 = { |
| 605 | .regulator_type = VRM, |
| 606 | .ops = &rpmh_regulator_vrm_ops, |
| 607 | .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000), |
| 608 | .n_voltages = 216, |
| 609 | .pmic_mode_map = pmic_mode_map_pmic4_smps, |
| 610 | .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, |
| 611 | }; |
| 612 | |
| 613 | static const struct rpmh_vreg_hw_data pmic4_ftsmps426 = { |
| 614 | .regulator_type = VRM, |
| 615 | .ops = &rpmh_regulator_vrm_ops, |
| 616 | .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000), |
| 617 | .n_voltages = 259, |
| 618 | .pmic_mode_map = pmic_mode_map_pmic4_smps, |
| 619 | .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, |
| 620 | }; |
| 621 | |
| 622 | static const struct rpmh_vreg_hw_data pmic4_bob = { |
| 623 | .regulator_type = VRM, |
| 624 | .ops = &rpmh_regulator_vrm_bypass_ops, |
| 625 | .voltage_range = REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000), |
| 626 | .n_voltages = 84, |
| 627 | .pmic_mode_map = pmic_mode_map_pmic4_bob, |
| 628 | .of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode, |
| 629 | }; |
| 630 | |
| 631 | static const struct rpmh_vreg_hw_data pmic4_lvs = { |
| 632 | .regulator_type = XOB, |
| 633 | .ops = &rpmh_regulator_xob_ops, |
| 634 | /* LVS hardware does not support voltage or mode configuration. */ |
| 635 | }; |
| 636 | |
| 637 | #define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \ |
| 638 | { \ |
| 639 | .name = _name, \ |
| 640 | .resource_name = _resource_name, \ |
| 641 | .hw_data = _hw_data, \ |
| 642 | .supply_name = _supply_name, \ |
| 643 | } |
| 644 | |
| 645 | static const struct rpmh_vreg_init_data pm8998_vreg_data[] = { |
| 646 | RPMH_VREG("smps1", "smp%s1", &pmic4_ftsmps426, "vdd-s1"), |
| 647 | RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd-s2"), |
| 648 | RPMH_VREG("smps3", "smp%s3", &pmic4_hfsmps3, "vdd-s3"), |
| 649 | RPMH_VREG("smps4", "smp%s4", &pmic4_hfsmps3, "vdd-s4"), |
| 650 | RPMH_VREG("smps5", "smp%s5", &pmic4_hfsmps3, "vdd-s5"), |
| 651 | RPMH_VREG("smps6", "smp%s6", &pmic4_ftsmps426, "vdd-s6"), |
| 652 | RPMH_VREG("smps7", "smp%s7", &pmic4_ftsmps426, "vdd-s7"), |
| 653 | RPMH_VREG("smps8", "smp%s8", &pmic4_ftsmps426, "vdd-s8"), |
| 654 | RPMH_VREG("smps9", "smp%s9", &pmic4_ftsmps426, "vdd-s9"), |
| 655 | RPMH_VREG("smps10", "smp%s10", &pmic4_ftsmps426, "vdd-s10"), |
| 656 | RPMH_VREG("smps11", "smp%s11", &pmic4_ftsmps426, "vdd-s11"), |
| 657 | RPMH_VREG("smps12", "smp%s12", &pmic4_ftsmps426, "vdd-s12"), |
| 658 | RPMH_VREG("smps13", "smp%s13", &pmic4_ftsmps426, "vdd-s13"), |
| 659 | RPMH_VREG("ldo1", "ldo%s1", &pmic4_nldo, "vdd-l1-l27"), |
| 660 | RPMH_VREG("ldo2", "ldo%s2", &pmic4_nldo, "vdd-l2-l8-l17"), |
| 661 | RPMH_VREG("ldo3", "ldo%s3", &pmic4_nldo, "vdd-l3-l11"), |
| 662 | RPMH_VREG("ldo4", "ldo%s4", &pmic4_nldo, "vdd-l4-l5"), |
| 663 | RPMH_VREG("ldo5", "ldo%s5", &pmic4_nldo, "vdd-l4-l5"), |
| 664 | RPMH_VREG("ldo6", "ldo%s6", &pmic4_pldo, "vdd-l6"), |
| 665 | RPMH_VREG("ldo7", "ldo%s7", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"), |
| 666 | RPMH_VREG("ldo8", "ldo%s8", &pmic4_nldo, "vdd-l2-l8-l17"), |
| 667 | RPMH_VREG("ldo9", "ldo%s9", &pmic4_pldo, "vdd-l9"), |
| 668 | RPMH_VREG("ldo10", "ldo%s10", &pmic4_pldo, "vdd-l10-l23-l25"), |
| 669 | RPMH_VREG("ldo11", "ldo%s11", &pmic4_nldo, "vdd-l3-l11"), |
| 670 | RPMH_VREG("ldo12", "ldo%s12", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"), |
| 671 | RPMH_VREG("ldo13", "ldo%s13", &pmic4_pldo, "vdd-l13-l19-l21"), |
| 672 | RPMH_VREG("ldo14", "ldo%s14", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"), |
| 673 | RPMH_VREG("ldo15", "ldo%s15", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"), |
| 674 | RPMH_VREG("ldo16", "ldo%s16", &pmic4_pldo, "vdd-l16-l28"), |
| 675 | RPMH_VREG("ldo17", "ldo%s17", &pmic4_nldo, "vdd-l2-l8-l17"), |
| 676 | RPMH_VREG("ldo18", "ldo%s18", &pmic4_pldo, "vdd-l18-l22"), |
| 677 | RPMH_VREG("ldo19", "ldo%s19", &pmic4_pldo, "vdd-l13-l19-l21"), |
| 678 | RPMH_VREG("ldo20", "ldo%s20", &pmic4_pldo, "vdd-l20-l24"), |
| 679 | RPMH_VREG("ldo21", "ldo%s21", &pmic4_pldo, "vdd-l13-l19-l21"), |
| 680 | RPMH_VREG("ldo22", "ldo%s22", &pmic4_pldo, "vdd-l18-l22"), |
| 681 | RPMH_VREG("ldo23", "ldo%s23", &pmic4_pldo, "vdd-l10-l23-l25"), |
| 682 | RPMH_VREG("ldo24", "ldo%s24", &pmic4_pldo, "vdd-l20-l24"), |
| 683 | RPMH_VREG("ldo25", "ldo%s25", &pmic4_pldo, "vdd-l10-l23-l25"), |
| 684 | RPMH_VREG("ldo26", "ldo%s26", &pmic4_nldo, "vdd-l26"), |
| 685 | RPMH_VREG("ldo27", "ldo%s27", &pmic4_nldo, "vdd-l1-l27"), |
| 686 | RPMH_VREG("ldo28", "ldo%s28", &pmic4_pldo, "vdd-l16-l28"), |
| 687 | RPMH_VREG("lvs1", "vs%s1", &pmic4_lvs, "vin-lvs-1-2"), |
| 688 | RPMH_VREG("lvs2", "vs%s2", &pmic4_lvs, "vin-lvs-1-2"), |
| 689 | {}, |
| 690 | }; |
| 691 | |
| 692 | static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = { |
| 693 | RPMH_VREG("bob", "bob%s1", &pmic4_bob, "vdd-bob"), |
| 694 | {}, |
| 695 | }; |
| 696 | |
| 697 | static const struct rpmh_vreg_init_data pm8005_vreg_data[] = { |
| 698 | RPMH_VREG("smps1", "smp%s1", &pmic4_ftsmps426, "vdd-s1"), |
| 699 | RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd-s2"), |
| 700 | RPMH_VREG("smps3", "smp%s3", &pmic4_ftsmps426, "vdd-s3"), |
| 701 | RPMH_VREG("smps4", "smp%s4", &pmic4_ftsmps426, "vdd-s4"), |
| 702 | {}, |
| 703 | }; |
| 704 | |
| 705 | static int rpmh_regulator_probe(struct platform_device *pdev) |
| 706 | { |
| 707 | struct device *dev = &pdev->dev; |
| 708 | const struct rpmh_vreg_init_data *vreg_data; |
| 709 | struct device_node *node; |
| 710 | struct rpmh_vreg *vreg; |
| 711 | const char *pmic_id; |
| 712 | int ret; |
| 713 | |
| 714 | vreg_data = of_device_get_match_data(dev); |
| 715 | if (!vreg_data) |
| 716 | return -ENODEV; |
| 717 | |
| 718 | ret = of_property_read_string(dev->of_node, "qcom,pmic-id", &pmic_id); |
| 719 | if (ret < 0) { |
| 720 | dev_err(dev, "qcom,pmic-id missing in DT node\n"); |
| 721 | return ret; |
| 722 | } |
| 723 | |
| 724 | for_each_available_child_of_node(dev->of_node, node) { |
| 725 | vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL); |
| 726 | if (!vreg) { |
| 727 | of_node_put(node); |
| 728 | return -ENOMEM; |
| 729 | } |
| 730 | |
| 731 | ret = rpmh_regulator_init_vreg(vreg, dev, node, pmic_id, |
| 732 | vreg_data); |
| 733 | if (ret < 0) { |
| 734 | of_node_put(node); |
| 735 | return ret; |
| 736 | } |
| 737 | } |
| 738 | |
| 739 | return 0; |
| 740 | } |
| 741 | |
| 742 | static const struct of_device_id rpmh_regulator_match_table[] = { |
| 743 | { |
| 744 | .compatible = "qcom,pm8998-rpmh-regulators", |
| 745 | .data = pm8998_vreg_data, |
| 746 | }, |
| 747 | { |
| 748 | .compatible = "qcom,pmi8998-rpmh-regulators", |
| 749 | .data = pmi8998_vreg_data, |
| 750 | }, |
| 751 | { |
| 752 | .compatible = "qcom,pm8005-rpmh-regulators", |
| 753 | .data = pm8005_vreg_data, |
| 754 | }, |
| 755 | {} |
| 756 | }; |
| 757 | MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table); |
| 758 | |
| 759 | static struct platform_driver rpmh_regulator_driver = { |
| 760 | .driver = { |
| 761 | .name = "qcom-rpmh-regulator", |
| 762 | .of_match_table = of_match_ptr(rpmh_regulator_match_table), |
| 763 | }, |
| 764 | .probe = rpmh_regulator_probe, |
| 765 | }; |
| 766 | module_platform_driver(rpmh_regulator_driver); |
| 767 | |
| 768 | MODULE_DESCRIPTION("Qualcomm RPMh regulator driver"); |
| 769 | MODULE_LICENSE("GPL v2"); |