Chunfeng Yun | 0cbd4b3 | 2015-11-24 13:09:55 +0200 | [diff] [blame] | 1 | /* |
| 2 | * MediaTek xHCI Host Controller Driver |
| 3 | * |
| 4 | * Copyright (c) 2015 MediaTek Inc. |
| 5 | * Author: |
| 6 | * Chunfeng Yun <chunfeng.yun@mediatek.com> |
| 7 | * |
| 8 | * This software is licensed under the terms of the GNU General Public |
| 9 | * License version 2, as published by the Free Software Foundation, and |
| 10 | * may be copied, distributed, and modified under those terms. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | */ |
| 18 | |
| 19 | #include <linux/clk.h> |
| 20 | #include <linux/dma-mapping.h> |
| 21 | #include <linux/iopoll.h> |
| 22 | #include <linux/kernel.h> |
| 23 | #include <linux/mfd/syscon.h> |
| 24 | #include <linux/module.h> |
| 25 | #include <linux/of.h> |
| 26 | #include <linux/phy/phy.h> |
| 27 | #include <linux/platform_device.h> |
| 28 | #include <linux/pm_runtime.h> |
| 29 | #include <linux/regmap.h> |
| 30 | #include <linux/regulator/consumer.h> |
| 31 | |
| 32 | #include "xhci.h" |
| 33 | #include "xhci-mtk.h" |
| 34 | |
| 35 | /* ip_pw_ctrl0 register */ |
| 36 | #define CTRL0_IP_SW_RST BIT(0) |
| 37 | |
| 38 | /* ip_pw_ctrl1 register */ |
| 39 | #define CTRL1_IP_HOST_PDN BIT(0) |
| 40 | |
| 41 | /* ip_pw_ctrl2 register */ |
| 42 | #define CTRL2_IP_DEV_PDN BIT(0) |
| 43 | |
| 44 | /* ip_pw_sts1 register */ |
| 45 | #define STS1_IP_SLEEP_STS BIT(30) |
| 46 | #define STS1_XHCI_RST BIT(11) |
| 47 | #define STS1_SYS125_RST BIT(10) |
| 48 | #define STS1_REF_RST BIT(8) |
| 49 | #define STS1_SYSPLL_STABLE BIT(0) |
| 50 | |
| 51 | /* ip_xhci_cap register */ |
| 52 | #define CAP_U3_PORT_NUM(p) ((p) & 0xff) |
| 53 | #define CAP_U2_PORT_NUM(p) (((p) >> 8) & 0xff) |
| 54 | |
| 55 | /* u3_ctrl_p register */ |
| 56 | #define CTRL_U3_PORT_HOST_SEL BIT(2) |
| 57 | #define CTRL_U3_PORT_PDN BIT(1) |
| 58 | #define CTRL_U3_PORT_DIS BIT(0) |
| 59 | |
| 60 | /* u2_ctrl_p register */ |
| 61 | #define CTRL_U2_PORT_HOST_SEL BIT(2) |
| 62 | #define CTRL_U2_PORT_PDN BIT(1) |
| 63 | #define CTRL_U2_PORT_DIS BIT(0) |
| 64 | |
| 65 | /* u2_phy_pll register */ |
| 66 | #define CTRL_U2_FORCE_PLL_STB BIT(28) |
| 67 | |
| 68 | #define PERI_WK_CTRL0 0x400 |
| 69 | #define UWK_CTR0_0P_LS_PE BIT(8) /* posedge */ |
| 70 | #define UWK_CTR0_0P_LS_NE BIT(7) /* negedge for 0p linestate*/ |
| 71 | #define UWK_CTL1_1P_LS_C(x) (((x) & 0xf) << 1) |
| 72 | #define UWK_CTL1_1P_LS_E BIT(0) |
| 73 | |
| 74 | #define PERI_WK_CTRL1 0x404 |
| 75 | #define UWK_CTL1_IS_C(x) (((x) & 0xf) << 26) |
| 76 | #define UWK_CTL1_IS_E BIT(25) |
| 77 | #define UWK_CTL1_0P_LS_C(x) (((x) & 0xf) << 21) |
| 78 | #define UWK_CTL1_0P_LS_E BIT(20) |
| 79 | #define UWK_CTL1_IDDIG_C(x) (((x) & 0xf) << 11) /* cycle debounce */ |
| 80 | #define UWK_CTL1_IDDIG_E BIT(10) /* enable debounce */ |
| 81 | #define UWK_CTL1_IDDIG_P BIT(9) /* polarity */ |
| 82 | #define UWK_CTL1_0P_LS_P BIT(7) |
| 83 | #define UWK_CTL1_IS_P BIT(6) /* polarity for ip sleep */ |
| 84 | |
| 85 | enum ssusb_wakeup_src { |
| 86 | SSUSB_WK_IP_SLEEP = 1, |
| 87 | SSUSB_WK_LINE_STATE = 2, |
| 88 | }; |
| 89 | |
| 90 | static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk) |
| 91 | { |
| 92 | struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; |
| 93 | u32 value, check_val; |
| 94 | int ret; |
| 95 | int i; |
| 96 | |
| 97 | /* power on host ip */ |
| 98 | value = readl(&ippc->ip_pw_ctr1); |
| 99 | value &= ~CTRL1_IP_HOST_PDN; |
| 100 | writel(value, &ippc->ip_pw_ctr1); |
| 101 | |
| 102 | /* power on and enable all u3 ports */ |
| 103 | for (i = 0; i < mtk->num_u3_ports; i++) { |
| 104 | value = readl(&ippc->u3_ctrl_p[i]); |
| 105 | value &= ~(CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS); |
| 106 | value |= CTRL_U3_PORT_HOST_SEL; |
| 107 | writel(value, &ippc->u3_ctrl_p[i]); |
| 108 | } |
| 109 | |
| 110 | /* power on and enable all u2 ports */ |
| 111 | for (i = 0; i < mtk->num_u2_ports; i++) { |
| 112 | value = readl(&ippc->u2_ctrl_p[i]); |
| 113 | value &= ~(CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS); |
| 114 | value |= CTRL_U2_PORT_HOST_SEL; |
| 115 | writel(value, &ippc->u2_ctrl_p[i]); |
| 116 | } |
| 117 | |
| 118 | /* |
| 119 | * wait for clocks to be stable, and clock domains reset to |
| 120 | * be inactive after power on and enable ports |
| 121 | */ |
| 122 | check_val = STS1_SYSPLL_STABLE | STS1_REF_RST | |
| 123 | STS1_SYS125_RST | STS1_XHCI_RST; |
| 124 | |
| 125 | ret = readl_poll_timeout(&ippc->ip_pw_sts1, value, |
| 126 | (check_val == (value & check_val)), 100, 20000); |
| 127 | if (ret) { |
| 128 | dev_err(mtk->dev, "clocks are not stable (0x%x)\n", value); |
| 129 | return ret; |
| 130 | } |
| 131 | |
| 132 | return 0; |
| 133 | } |
| 134 | |
| 135 | static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk) |
| 136 | { |
| 137 | struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; |
| 138 | u32 value; |
| 139 | int ret; |
| 140 | int i; |
| 141 | |
| 142 | /* power down all u3 ports */ |
| 143 | for (i = 0; i < mtk->num_u3_ports; i++) { |
| 144 | value = readl(&ippc->u3_ctrl_p[i]); |
| 145 | value |= CTRL_U3_PORT_PDN; |
| 146 | writel(value, &ippc->u3_ctrl_p[i]); |
| 147 | } |
| 148 | |
| 149 | /* power down all u2 ports */ |
| 150 | for (i = 0; i < mtk->num_u2_ports; i++) { |
| 151 | value = readl(&ippc->u2_ctrl_p[i]); |
| 152 | value |= CTRL_U2_PORT_PDN; |
| 153 | writel(value, &ippc->u2_ctrl_p[i]); |
| 154 | } |
| 155 | |
| 156 | /* power down host ip */ |
| 157 | value = readl(&ippc->ip_pw_ctr1); |
| 158 | value |= CTRL1_IP_HOST_PDN; |
| 159 | writel(value, &ippc->ip_pw_ctr1); |
| 160 | |
| 161 | /* wait for host ip to sleep */ |
| 162 | ret = readl_poll_timeout(&ippc->ip_pw_sts1, value, |
| 163 | (value & STS1_IP_SLEEP_STS), 100, 100000); |
| 164 | if (ret) { |
| 165 | dev_err(mtk->dev, "ip sleep failed!!!\n"); |
| 166 | return ret; |
| 167 | } |
| 168 | return 0; |
| 169 | } |
| 170 | |
| 171 | static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk) |
| 172 | { |
| 173 | struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; |
| 174 | u32 value; |
| 175 | |
| 176 | /* reset whole ip */ |
| 177 | value = readl(&ippc->ip_pw_ctr0); |
| 178 | value |= CTRL0_IP_SW_RST; |
| 179 | writel(value, &ippc->ip_pw_ctr0); |
| 180 | udelay(1); |
| 181 | value = readl(&ippc->ip_pw_ctr0); |
| 182 | value &= ~CTRL0_IP_SW_RST; |
| 183 | writel(value, &ippc->ip_pw_ctr0); |
| 184 | |
| 185 | /* |
| 186 | * device ip is default power-on in fact |
| 187 | * power down device ip, otherwise ip-sleep will fail |
| 188 | */ |
| 189 | value = readl(&ippc->ip_pw_ctr2); |
| 190 | value |= CTRL2_IP_DEV_PDN; |
| 191 | writel(value, &ippc->ip_pw_ctr2); |
| 192 | |
| 193 | value = readl(&ippc->ip_xhci_cap); |
| 194 | mtk->num_u3_ports = CAP_U3_PORT_NUM(value); |
| 195 | mtk->num_u2_ports = CAP_U2_PORT_NUM(value); |
| 196 | dev_dbg(mtk->dev, "%s u2p:%d, u3p:%d\n", __func__, |
| 197 | mtk->num_u2_ports, mtk->num_u3_ports); |
| 198 | |
| 199 | return xhci_mtk_host_enable(mtk); |
| 200 | } |
| 201 | |
| 202 | static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk) |
| 203 | { |
| 204 | int ret; |
| 205 | |
| 206 | ret = clk_prepare_enable(mtk->sys_clk); |
| 207 | if (ret) { |
| 208 | dev_err(mtk->dev, "failed to enable sys_clk\n"); |
| 209 | goto sys_clk_err; |
| 210 | } |
| 211 | |
| 212 | if (mtk->wakeup_src) { |
| 213 | ret = clk_prepare_enable(mtk->wk_deb_p0); |
| 214 | if (ret) { |
| 215 | dev_err(mtk->dev, "failed to enable wk_deb_p0\n"); |
| 216 | goto usb_p0_err; |
| 217 | } |
| 218 | |
| 219 | ret = clk_prepare_enable(mtk->wk_deb_p1); |
| 220 | if (ret) { |
| 221 | dev_err(mtk->dev, "failed to enable wk_deb_p1\n"); |
| 222 | goto usb_p1_err; |
| 223 | } |
| 224 | } |
| 225 | return 0; |
| 226 | |
| 227 | usb_p1_err: |
| 228 | clk_disable_unprepare(mtk->wk_deb_p0); |
| 229 | usb_p0_err: |
| 230 | clk_disable_unprepare(mtk->sys_clk); |
| 231 | sys_clk_err: |
| 232 | return -EINVAL; |
| 233 | } |
| 234 | |
| 235 | static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk) |
| 236 | { |
| 237 | if (mtk->wakeup_src) { |
| 238 | clk_disable_unprepare(mtk->wk_deb_p1); |
| 239 | clk_disable_unprepare(mtk->wk_deb_p0); |
| 240 | } |
| 241 | clk_disable_unprepare(mtk->sys_clk); |
| 242 | } |
| 243 | |
| 244 | /* only clocks can be turn off for ip-sleep wakeup mode */ |
| 245 | static void usb_wakeup_ip_sleep_en(struct xhci_hcd_mtk *mtk) |
| 246 | { |
| 247 | u32 tmp; |
| 248 | struct regmap *pericfg = mtk->pericfg; |
| 249 | |
| 250 | regmap_read(pericfg, PERI_WK_CTRL1, &tmp); |
| 251 | tmp &= ~UWK_CTL1_IS_P; |
| 252 | tmp &= ~(UWK_CTL1_IS_C(0xf)); |
| 253 | tmp |= UWK_CTL1_IS_C(0x8); |
| 254 | regmap_write(pericfg, PERI_WK_CTRL1, tmp); |
| 255 | regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E); |
| 256 | |
| 257 | regmap_read(pericfg, PERI_WK_CTRL1, &tmp); |
| 258 | dev_dbg(mtk->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n", |
| 259 | __func__, tmp); |
| 260 | } |
| 261 | |
| 262 | static void usb_wakeup_ip_sleep_dis(struct xhci_hcd_mtk *mtk) |
| 263 | { |
| 264 | u32 tmp; |
| 265 | |
| 266 | regmap_read(mtk->pericfg, PERI_WK_CTRL1, &tmp); |
| 267 | tmp &= ~UWK_CTL1_IS_E; |
| 268 | regmap_write(mtk->pericfg, PERI_WK_CTRL1, tmp); |
| 269 | } |
| 270 | |
| 271 | /* |
| 272 | * for line-state wakeup mode, phy's power should not power-down |
| 273 | * and only support cable plug in/out |
| 274 | */ |
| 275 | static void usb_wakeup_line_state_en(struct xhci_hcd_mtk *mtk) |
| 276 | { |
| 277 | u32 tmp; |
| 278 | struct regmap *pericfg = mtk->pericfg; |
| 279 | |
| 280 | /* line-state of u2-port0 */ |
| 281 | regmap_read(pericfg, PERI_WK_CTRL1, &tmp); |
| 282 | tmp &= ~UWK_CTL1_0P_LS_P; |
| 283 | tmp &= ~(UWK_CTL1_0P_LS_C(0xf)); |
| 284 | tmp |= UWK_CTL1_0P_LS_C(0x8); |
| 285 | regmap_write(pericfg, PERI_WK_CTRL1, tmp); |
| 286 | regmap_read(pericfg, PERI_WK_CTRL1, &tmp); |
| 287 | regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_0P_LS_E); |
| 288 | |
| 289 | /* line-state of u2-port1 */ |
| 290 | regmap_read(pericfg, PERI_WK_CTRL0, &tmp); |
| 291 | tmp &= ~(UWK_CTL1_1P_LS_C(0xf)); |
| 292 | tmp |= UWK_CTL1_1P_LS_C(0x8); |
| 293 | regmap_write(pericfg, PERI_WK_CTRL0, tmp); |
| 294 | regmap_write(pericfg, PERI_WK_CTRL0, tmp | UWK_CTL1_1P_LS_E); |
| 295 | } |
| 296 | |
| 297 | static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk) |
| 298 | { |
| 299 | u32 tmp; |
| 300 | struct regmap *pericfg = mtk->pericfg; |
| 301 | |
| 302 | /* line-state of u2-port0 */ |
| 303 | regmap_read(pericfg, PERI_WK_CTRL1, &tmp); |
| 304 | tmp &= ~UWK_CTL1_0P_LS_E; |
| 305 | regmap_write(pericfg, PERI_WK_CTRL1, tmp); |
| 306 | |
| 307 | /* line-state of u2-port1 */ |
| 308 | regmap_read(pericfg, PERI_WK_CTRL0, &tmp); |
| 309 | tmp &= ~UWK_CTL1_1P_LS_E; |
| 310 | regmap_write(pericfg, PERI_WK_CTRL0, tmp); |
| 311 | } |
| 312 | |
| 313 | static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk) |
| 314 | { |
| 315 | if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP) |
| 316 | usb_wakeup_ip_sleep_en(mtk); |
| 317 | else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE) |
| 318 | usb_wakeup_line_state_en(mtk); |
| 319 | } |
| 320 | |
| 321 | static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk) |
| 322 | { |
| 323 | if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP) |
| 324 | usb_wakeup_ip_sleep_dis(mtk); |
| 325 | else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE) |
| 326 | usb_wakeup_line_state_dis(mtk); |
| 327 | } |
| 328 | |
| 329 | static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk, |
| 330 | struct device_node *dn) |
| 331 | { |
| 332 | struct device *dev = mtk->dev; |
| 333 | |
| 334 | /* |
| 335 | * wakeup function is optional, so it is not an error if this property |
| 336 | * does not exist, and in such case, no need to get relative |
| 337 | * properties anymore. |
| 338 | */ |
| 339 | of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src); |
| 340 | if (!mtk->wakeup_src) |
| 341 | return 0; |
| 342 | |
| 343 | mtk->wk_deb_p0 = devm_clk_get(dev, "wakeup_deb_p0"); |
| 344 | if (IS_ERR(mtk->wk_deb_p0)) { |
| 345 | dev_err(dev, "fail to get wakeup_deb_p0\n"); |
| 346 | return PTR_ERR(mtk->wk_deb_p0); |
| 347 | } |
| 348 | |
| 349 | mtk->wk_deb_p1 = devm_clk_get(dev, "wakeup_deb_p1"); |
| 350 | if (IS_ERR(mtk->wk_deb_p1)) { |
| 351 | dev_err(dev, "fail to get wakeup_deb_p1\n"); |
| 352 | return PTR_ERR(mtk->wk_deb_p1); |
| 353 | } |
| 354 | |
| 355 | mtk->pericfg = syscon_regmap_lookup_by_phandle(dn, |
| 356 | "mediatek,syscon-wakeup"); |
| 357 | if (IS_ERR(mtk->pericfg)) { |
| 358 | dev_err(dev, "fail to get pericfg regs\n"); |
| 359 | return PTR_ERR(mtk->pericfg); |
| 360 | } |
| 361 | |
| 362 | return 0; |
| 363 | } |
| 364 | |
| 365 | static int xhci_mtk_setup(struct usb_hcd *hcd); |
| 366 | static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = { |
| 367 | .extra_priv_size = sizeof(struct xhci_hcd), |
| 368 | .reset = xhci_mtk_setup, |
| 369 | }; |
| 370 | |
| 371 | static struct hc_driver __read_mostly xhci_mtk_hc_driver; |
| 372 | |
| 373 | static int xhci_mtk_phy_init(struct xhci_hcd_mtk *mtk) |
| 374 | { |
| 375 | int i; |
| 376 | int ret; |
| 377 | |
| 378 | for (i = 0; i < mtk->num_phys; i++) { |
| 379 | ret = phy_init(mtk->phys[i]); |
| 380 | if (ret) |
| 381 | goto exit_phy; |
| 382 | } |
| 383 | return 0; |
| 384 | |
| 385 | exit_phy: |
| 386 | for (; i > 0; i--) |
| 387 | phy_exit(mtk->phys[i - 1]); |
| 388 | |
| 389 | return ret; |
| 390 | } |
| 391 | |
| 392 | static int xhci_mtk_phy_exit(struct xhci_hcd_mtk *mtk) |
| 393 | { |
| 394 | int i; |
| 395 | |
| 396 | for (i = 0; i < mtk->num_phys; i++) |
| 397 | phy_exit(mtk->phys[i]); |
| 398 | |
| 399 | return 0; |
| 400 | } |
| 401 | |
| 402 | static int xhci_mtk_phy_power_on(struct xhci_hcd_mtk *mtk) |
| 403 | { |
| 404 | int i; |
| 405 | int ret; |
| 406 | |
| 407 | for (i = 0; i < mtk->num_phys; i++) { |
| 408 | ret = phy_power_on(mtk->phys[i]); |
| 409 | if (ret) |
| 410 | goto power_off_phy; |
| 411 | } |
| 412 | return 0; |
| 413 | |
| 414 | power_off_phy: |
| 415 | for (; i > 0; i--) |
| 416 | phy_power_off(mtk->phys[i - 1]); |
| 417 | |
| 418 | return ret; |
| 419 | } |
| 420 | |
| 421 | static void xhci_mtk_phy_power_off(struct xhci_hcd_mtk *mtk) |
| 422 | { |
| 423 | unsigned int i; |
| 424 | |
| 425 | for (i = 0; i < mtk->num_phys; i++) |
| 426 | phy_power_off(mtk->phys[i]); |
| 427 | } |
| 428 | |
| 429 | static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk) |
| 430 | { |
| 431 | int ret; |
| 432 | |
| 433 | ret = regulator_enable(mtk->vbus); |
| 434 | if (ret) { |
| 435 | dev_err(mtk->dev, "failed to enable vbus\n"); |
| 436 | return ret; |
| 437 | } |
| 438 | |
| 439 | ret = regulator_enable(mtk->vusb33); |
| 440 | if (ret) { |
| 441 | dev_err(mtk->dev, "failed to enable vusb33\n"); |
| 442 | regulator_disable(mtk->vbus); |
| 443 | return ret; |
| 444 | } |
| 445 | return 0; |
| 446 | } |
| 447 | |
| 448 | static void xhci_mtk_ldos_disable(struct xhci_hcd_mtk *mtk) |
| 449 | { |
| 450 | regulator_disable(mtk->vbus); |
| 451 | regulator_disable(mtk->vusb33); |
| 452 | } |
| 453 | |
| 454 | static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) |
| 455 | { |
| 456 | struct usb_hcd *hcd = xhci_to_hcd(xhci); |
| 457 | struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); |
| 458 | |
| 459 | /* |
| 460 | * As of now platform drivers don't provide MSI support so we ensure |
| 461 | * here that the generic code does not try to make a pci_dev from our |
| 462 | * dev struct in order to setup MSI |
| 463 | */ |
| 464 | xhci->quirks |= XHCI_PLAT; |
| 465 | xhci->quirks |= XHCI_MTK_HOST; |
| 466 | /* |
| 467 | * MTK host controller gives a spurious successful event after a |
| 468 | * short transfer. Ignore it. |
| 469 | */ |
| 470 | xhci->quirks |= XHCI_SPURIOUS_SUCCESS; |
| 471 | if (mtk->lpm_support) |
| 472 | xhci->quirks |= XHCI_LPM_SUPPORT; |
| 473 | } |
| 474 | |
| 475 | /* called during probe() after chip reset completes */ |
| 476 | static int xhci_mtk_setup(struct usb_hcd *hcd) |
| 477 | { |
| 478 | struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); |
| 479 | int ret; |
| 480 | |
| 481 | if (usb_hcd_is_primary_hcd(hcd)) { |
| 482 | ret = xhci_mtk_ssusb_config(mtk); |
| 483 | if (ret) |
| 484 | return ret; |
| 485 | ret = xhci_mtk_sch_init(mtk); |
| 486 | if (ret) |
| 487 | return ret; |
| 488 | } |
| 489 | |
| 490 | return xhci_gen_setup(hcd, xhci_mtk_quirks); |
| 491 | } |
| 492 | |
| 493 | static int xhci_mtk_probe(struct platform_device *pdev) |
| 494 | { |
| 495 | struct device *dev = &pdev->dev; |
| 496 | struct device_node *node = dev->of_node; |
| 497 | struct xhci_hcd_mtk *mtk; |
| 498 | const struct hc_driver *driver; |
| 499 | struct xhci_hcd *xhci; |
| 500 | struct resource *res; |
| 501 | struct usb_hcd *hcd; |
| 502 | struct phy *phy; |
| 503 | int phy_num; |
| 504 | int ret = -ENODEV; |
| 505 | int irq; |
| 506 | |
| 507 | if (usb_disabled()) |
| 508 | return -ENODEV; |
| 509 | |
| 510 | driver = &xhci_mtk_hc_driver; |
| 511 | mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); |
| 512 | if (!mtk) |
| 513 | return -ENOMEM; |
| 514 | |
| 515 | mtk->dev = dev; |
| 516 | mtk->vbus = devm_regulator_get(dev, "vbus"); |
| 517 | if (IS_ERR(mtk->vbus)) { |
| 518 | dev_err(dev, "fail to get vbus\n"); |
| 519 | return PTR_ERR(mtk->vbus); |
| 520 | } |
| 521 | |
| 522 | mtk->vusb33 = devm_regulator_get(dev, "vusb33"); |
| 523 | if (IS_ERR(mtk->vusb33)) { |
| 524 | dev_err(dev, "fail to get vusb33\n"); |
| 525 | return PTR_ERR(mtk->vusb33); |
| 526 | } |
| 527 | |
| 528 | mtk->sys_clk = devm_clk_get(dev, "sys_ck"); |
| 529 | if (IS_ERR(mtk->sys_clk)) { |
| 530 | dev_err(dev, "fail to get sys_ck\n"); |
| 531 | return PTR_ERR(mtk->sys_clk); |
| 532 | } |
| 533 | |
| 534 | mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable"); |
| 535 | |
| 536 | ret = usb_wakeup_of_property_parse(mtk, node); |
| 537 | if (ret) |
| 538 | return ret; |
| 539 | |
| 540 | mtk->num_phys = of_count_phandle_with_args(node, |
| 541 | "phys", "#phy-cells"); |
| 542 | if (mtk->num_phys > 0) { |
| 543 | mtk->phys = devm_kcalloc(dev, mtk->num_phys, |
| 544 | sizeof(*mtk->phys), GFP_KERNEL); |
| 545 | if (!mtk->phys) |
| 546 | return -ENOMEM; |
| 547 | } else { |
| 548 | mtk->num_phys = 0; |
| 549 | } |
| 550 | pm_runtime_enable(dev); |
| 551 | pm_runtime_get_sync(dev); |
| 552 | device_enable_async_suspend(dev); |
| 553 | |
| 554 | ret = xhci_mtk_ldos_enable(mtk); |
| 555 | if (ret) |
| 556 | goto disable_pm; |
| 557 | |
| 558 | ret = xhci_mtk_clks_enable(mtk); |
| 559 | if (ret) |
| 560 | goto disable_ldos; |
| 561 | |
| 562 | irq = platform_get_irq(pdev, 0); |
| 563 | if (irq < 0) |
| 564 | goto disable_clk; |
| 565 | |
| 566 | /* Initialize dma_mask and coherent_dma_mask to 32-bits */ |
| 567 | ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); |
| 568 | if (ret) |
| 569 | goto disable_clk; |
| 570 | |
| 571 | if (!dev->dma_mask) |
| 572 | dev->dma_mask = &dev->coherent_dma_mask; |
| 573 | else |
| 574 | dma_set_mask(dev, DMA_BIT_MASK(32)); |
| 575 | |
| 576 | hcd = usb_create_hcd(driver, dev, dev_name(dev)); |
| 577 | if (!hcd) { |
| 578 | ret = -ENOMEM; |
| 579 | goto disable_clk; |
| 580 | } |
| 581 | |
| 582 | /* |
| 583 | * USB 2.0 roothub is stored in the platform_device. |
| 584 | * Swap it with mtk HCD. |
| 585 | */ |
| 586 | mtk->hcd = platform_get_drvdata(pdev); |
| 587 | platform_set_drvdata(pdev, mtk); |
| 588 | |
| 589 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 590 | hcd->regs = devm_ioremap_resource(dev, res); |
| 591 | if (IS_ERR(hcd->regs)) { |
| 592 | ret = PTR_ERR(hcd->regs); |
| 593 | goto put_usb2_hcd; |
| 594 | } |
| 595 | hcd->rsrc_start = res->start; |
| 596 | hcd->rsrc_len = resource_size(res); |
| 597 | |
| 598 | res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| 599 | mtk->ippc_regs = devm_ioremap_resource(dev, res); |
| 600 | if (IS_ERR(mtk->ippc_regs)) { |
| 601 | ret = PTR_ERR(mtk->ippc_regs); |
| 602 | goto put_usb2_hcd; |
| 603 | } |
| 604 | |
| 605 | for (phy_num = 0; phy_num < mtk->num_phys; phy_num++) { |
| 606 | phy = devm_of_phy_get_by_index(dev, node, phy_num); |
| 607 | if (IS_ERR(phy)) { |
| 608 | ret = PTR_ERR(phy); |
| 609 | goto put_usb2_hcd; |
| 610 | } |
| 611 | mtk->phys[phy_num] = phy; |
| 612 | } |
| 613 | |
| 614 | ret = xhci_mtk_phy_init(mtk); |
| 615 | if (ret) |
| 616 | goto put_usb2_hcd; |
| 617 | |
| 618 | ret = xhci_mtk_phy_power_on(mtk); |
| 619 | if (ret) |
| 620 | goto exit_phys; |
| 621 | |
| 622 | device_init_wakeup(dev, true); |
| 623 | |
| 624 | xhci = hcd_to_xhci(hcd); |
| 625 | xhci->main_hcd = hcd; |
| 626 | xhci->shared_hcd = usb_create_shared_hcd(driver, dev, |
| 627 | dev_name(dev), hcd); |
| 628 | if (!xhci->shared_hcd) { |
| 629 | ret = -ENOMEM; |
| 630 | goto power_off_phys; |
| 631 | } |
| 632 | |
| 633 | if (HCC_MAX_PSA(xhci->hcc_params) >= 4) |
| 634 | xhci->shared_hcd->can_do_streams = 1; |
| 635 | |
| 636 | ret = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| 637 | if (ret) |
| 638 | goto put_usb3_hcd; |
| 639 | |
| 640 | ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); |
| 641 | if (ret) |
| 642 | goto dealloc_usb2_hcd; |
| 643 | |
| 644 | return 0; |
| 645 | |
| 646 | dealloc_usb2_hcd: |
| 647 | usb_remove_hcd(hcd); |
| 648 | |
| 649 | put_usb3_hcd: |
| 650 | xhci_mtk_sch_exit(mtk); |
| 651 | usb_put_hcd(xhci->shared_hcd); |
| 652 | |
| 653 | power_off_phys: |
| 654 | xhci_mtk_phy_power_off(mtk); |
| 655 | device_init_wakeup(dev, false); |
| 656 | |
| 657 | exit_phys: |
| 658 | xhci_mtk_phy_exit(mtk); |
| 659 | |
| 660 | put_usb2_hcd: |
| 661 | usb_put_hcd(hcd); |
| 662 | |
| 663 | disable_clk: |
| 664 | xhci_mtk_clks_disable(mtk); |
| 665 | |
| 666 | disable_ldos: |
| 667 | xhci_mtk_ldos_disable(mtk); |
| 668 | |
| 669 | disable_pm: |
| 670 | pm_runtime_put_sync(dev); |
| 671 | pm_runtime_disable(dev); |
| 672 | return ret; |
| 673 | } |
| 674 | |
| 675 | static int xhci_mtk_remove(struct platform_device *dev) |
| 676 | { |
| 677 | struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev); |
| 678 | struct usb_hcd *hcd = mtk->hcd; |
| 679 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 680 | |
| 681 | usb_remove_hcd(xhci->shared_hcd); |
| 682 | xhci_mtk_phy_power_off(mtk); |
| 683 | xhci_mtk_phy_exit(mtk); |
| 684 | device_init_wakeup(&dev->dev, false); |
| 685 | |
| 686 | usb_remove_hcd(hcd); |
| 687 | usb_put_hcd(xhci->shared_hcd); |
| 688 | usb_put_hcd(hcd); |
| 689 | xhci_mtk_sch_exit(mtk); |
| 690 | xhci_mtk_clks_disable(mtk); |
| 691 | xhci_mtk_ldos_disable(mtk); |
| 692 | pm_runtime_put_sync(&dev->dev); |
| 693 | pm_runtime_disable(&dev->dev); |
| 694 | |
| 695 | return 0; |
| 696 | } |
| 697 | |
Chunfeng Yun | 882fa27 | 2016-01-26 17:50:10 +0200 | [diff] [blame] | 698 | /* |
| 699 | * if ip sleep fails, and all clocks are disabled, access register will hang |
| 700 | * AHB bus, so stop polling roothubs to avoid regs access on bus suspend. |
| 701 | * and no need to check whether ip sleep failed or not; this will cause SPM |
| 702 | * to wake up system immediately after system suspend complete if ip sleep |
| 703 | * fails, it is what we wanted. |
| 704 | */ |
Arnd Bergmann | 8dac530 | 2016-03-02 16:24:04 +0100 | [diff] [blame] | 705 | static int __maybe_unused xhci_mtk_suspend(struct device *dev) |
Chunfeng Yun | 0cbd4b3 | 2015-11-24 13:09:55 +0200 | [diff] [blame] | 706 | { |
| 707 | struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); |
Chunfeng Yun | 882fa27 | 2016-01-26 17:50:10 +0200 | [diff] [blame] | 708 | struct usb_hcd *hcd = mtk->hcd; |
| 709 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 710 | |
| 711 | xhci_dbg(xhci, "%s: stop port polling\n", __func__); |
| 712 | clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); |
| 713 | del_timer_sync(&hcd->rh_timer); |
| 714 | clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); |
| 715 | del_timer_sync(&xhci->shared_hcd->rh_timer); |
Chunfeng Yun | 0cbd4b3 | 2015-11-24 13:09:55 +0200 | [diff] [blame] | 716 | |
| 717 | xhci_mtk_host_disable(mtk); |
| 718 | xhci_mtk_phy_power_off(mtk); |
| 719 | xhci_mtk_clks_disable(mtk); |
| 720 | usb_wakeup_enable(mtk); |
| 721 | return 0; |
| 722 | } |
| 723 | |
Arnd Bergmann | 8dac530 | 2016-03-02 16:24:04 +0100 | [diff] [blame] | 724 | static int __maybe_unused xhci_mtk_resume(struct device *dev) |
Chunfeng Yun | 0cbd4b3 | 2015-11-24 13:09:55 +0200 | [diff] [blame] | 725 | { |
| 726 | struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); |
Chunfeng Yun | 882fa27 | 2016-01-26 17:50:10 +0200 | [diff] [blame] | 727 | struct usb_hcd *hcd = mtk->hcd; |
| 728 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
Chunfeng Yun | 0cbd4b3 | 2015-11-24 13:09:55 +0200 | [diff] [blame] | 729 | |
| 730 | usb_wakeup_disable(mtk); |
| 731 | xhci_mtk_clks_enable(mtk); |
| 732 | xhci_mtk_phy_power_on(mtk); |
| 733 | xhci_mtk_host_enable(mtk); |
Chunfeng Yun | 882fa27 | 2016-01-26 17:50:10 +0200 | [diff] [blame] | 734 | |
| 735 | xhci_dbg(xhci, "%s: restart port polling\n", __func__); |
| 736 | set_bit(HCD_FLAG_POLL_RH, &hcd->flags); |
| 737 | usb_hcd_poll_rh_status(hcd); |
| 738 | set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); |
| 739 | usb_hcd_poll_rh_status(xhci->shared_hcd); |
Chunfeng Yun | 0cbd4b3 | 2015-11-24 13:09:55 +0200 | [diff] [blame] | 740 | return 0; |
| 741 | } |
| 742 | |
| 743 | static const struct dev_pm_ops xhci_mtk_pm_ops = { |
| 744 | SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) |
| 745 | }; |
Arnd Bergmann | 8dac530 | 2016-03-02 16:24:04 +0100 | [diff] [blame] | 746 | #define DEV_PM_OPS IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL |
Chunfeng Yun | 0cbd4b3 | 2015-11-24 13:09:55 +0200 | [diff] [blame] | 747 | |
| 748 | #ifdef CONFIG_OF |
| 749 | static const struct of_device_id mtk_xhci_of_match[] = { |
| 750 | { .compatible = "mediatek,mt8173-xhci"}, |
| 751 | { }, |
| 752 | }; |
| 753 | MODULE_DEVICE_TABLE(of, mtk_xhci_of_match); |
| 754 | #endif |
| 755 | |
| 756 | static struct platform_driver mtk_xhci_driver = { |
| 757 | .probe = xhci_mtk_probe, |
| 758 | .remove = xhci_mtk_remove, |
| 759 | .driver = { |
| 760 | .name = "xhci-mtk", |
| 761 | .pm = DEV_PM_OPS, |
| 762 | .of_match_table = of_match_ptr(mtk_xhci_of_match), |
| 763 | }, |
| 764 | }; |
| 765 | MODULE_ALIAS("platform:xhci-mtk"); |
| 766 | |
| 767 | static int __init xhci_mtk_init(void) |
| 768 | { |
| 769 | xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides); |
| 770 | return platform_driver_register(&mtk_xhci_driver); |
| 771 | } |
| 772 | module_init(xhci_mtk_init); |
| 773 | |
| 774 | static void __exit xhci_mtk_exit(void) |
| 775 | { |
| 776 | platform_driver_unregister(&mtk_xhci_driver); |
| 777 | } |
| 778 | module_exit(xhci_mtk_exit); |
| 779 | |
| 780 | MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); |
| 781 | MODULE_DESCRIPTION("MediaTek xHCI Host Controller Driver"); |
| 782 | MODULE_LICENSE("GPL v2"); |