Andrew Victor | 877d772 | 2007-05-11 20:49:56 +0100 | [diff] [blame] | 1 | /* |
| 2 | * arch/arm/mach-at91/at91sam9rl.c |
| 3 | * |
| 4 | * Copyright (C) 2005 SAN People |
| 5 | * Copyright (C) 2007 Atmel Corporation |
| 6 | * |
| 7 | * This file is subject to the terms and conditions of the GNU General Public |
| 8 | * License. See the file COPYING in the main directory of this archive for |
| 9 | * more details. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/module.h> |
| 13 | |
| 14 | #include <asm/mach/arch.h> |
| 15 | #include <asm/mach/map.h> |
| 16 | #include <asm/arch/cpu.h> |
| 17 | #include <asm/arch/at91sam9rl.h> |
| 18 | #include <asm/arch/at91_pmc.h> |
| 19 | #include <asm/arch/at91_rstc.h> |
| 20 | |
| 21 | #include "generic.h" |
| 22 | #include "clock.h" |
| 23 | |
| 24 | static struct map_desc at91sam9rl_io_desc[] __initdata = { |
| 25 | { |
| 26 | .virtual = AT91_VA_BASE_SYS, |
| 27 | .pfn = __phys_to_pfn(AT91_BASE_SYS), |
| 28 | .length = SZ_16K, |
| 29 | .type = MT_DEVICE, |
| 30 | }, |
| 31 | }; |
| 32 | |
| 33 | static struct map_desc at91sam9rl_sram_desc[] __initdata = { |
| 34 | { |
| 35 | .pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE), |
| 36 | .type = MT_DEVICE, |
| 37 | } |
| 38 | }; |
| 39 | |
| 40 | /* -------------------------------------------------------------------- |
| 41 | * Clocks |
| 42 | * -------------------------------------------------------------------- */ |
| 43 | |
| 44 | /* |
| 45 | * The peripheral clocks. |
| 46 | */ |
| 47 | static struct clk pioA_clk = { |
| 48 | .name = "pioA_clk", |
| 49 | .pmc_mask = 1 << AT91SAM9RL_ID_PIOA, |
| 50 | .type = CLK_TYPE_PERIPHERAL, |
| 51 | }; |
| 52 | static struct clk pioB_clk = { |
| 53 | .name = "pioB_clk", |
| 54 | .pmc_mask = 1 << AT91SAM9RL_ID_PIOB, |
| 55 | .type = CLK_TYPE_PERIPHERAL, |
| 56 | }; |
| 57 | static struct clk pioC_clk = { |
| 58 | .name = "pioC_clk", |
| 59 | .pmc_mask = 1 << AT91SAM9RL_ID_PIOC, |
| 60 | .type = CLK_TYPE_PERIPHERAL, |
| 61 | }; |
| 62 | static struct clk pioD_clk = { |
| 63 | .name = "pioD_clk", |
| 64 | .pmc_mask = 1 << AT91SAM9RL_ID_PIOD, |
| 65 | .type = CLK_TYPE_PERIPHERAL, |
| 66 | }; |
| 67 | static struct clk usart0_clk = { |
| 68 | .name = "usart0_clk", |
| 69 | .pmc_mask = 1 << AT91SAM9RL_ID_US0, |
| 70 | .type = CLK_TYPE_PERIPHERAL, |
| 71 | }; |
| 72 | static struct clk usart1_clk = { |
| 73 | .name = "usart1_clk", |
| 74 | .pmc_mask = 1 << AT91SAM9RL_ID_US1, |
| 75 | .type = CLK_TYPE_PERIPHERAL, |
| 76 | }; |
| 77 | static struct clk usart2_clk = { |
| 78 | .name = "usart2_clk", |
| 79 | .pmc_mask = 1 << AT91SAM9RL_ID_US2, |
| 80 | .type = CLK_TYPE_PERIPHERAL, |
| 81 | }; |
| 82 | static struct clk usart3_clk = { |
| 83 | .name = "usart3_clk", |
| 84 | .pmc_mask = 1 << AT91SAM9RL_ID_US3, |
| 85 | .type = CLK_TYPE_PERIPHERAL, |
| 86 | }; |
| 87 | static struct clk mmc_clk = { |
| 88 | .name = "mci_clk", |
| 89 | .pmc_mask = 1 << AT91SAM9RL_ID_MCI, |
| 90 | .type = CLK_TYPE_PERIPHERAL, |
| 91 | }; |
| 92 | static struct clk twi0_clk = { |
| 93 | .name = "twi0_clk", |
| 94 | .pmc_mask = 1 << AT91SAM9RL_ID_TWI0, |
| 95 | .type = CLK_TYPE_PERIPHERAL, |
| 96 | }; |
| 97 | static struct clk twi1_clk = { |
| 98 | .name = "twi1_clk", |
| 99 | .pmc_mask = 1 << AT91SAM9RL_ID_TWI1, |
| 100 | .type = CLK_TYPE_PERIPHERAL, |
| 101 | }; |
| 102 | static struct clk spi_clk = { |
| 103 | .name = "spi_clk", |
| 104 | .pmc_mask = 1 << AT91SAM9RL_ID_SPI, |
| 105 | .type = CLK_TYPE_PERIPHERAL, |
| 106 | }; |
| 107 | static struct clk ssc0_clk = { |
| 108 | .name = "ssc0_clk", |
| 109 | .pmc_mask = 1 << AT91SAM9RL_ID_SSC0, |
| 110 | .type = CLK_TYPE_PERIPHERAL, |
| 111 | }; |
| 112 | static struct clk ssc1_clk = { |
| 113 | .name = "ssc1_clk", |
| 114 | .pmc_mask = 1 << AT91SAM9RL_ID_SSC1, |
| 115 | .type = CLK_TYPE_PERIPHERAL, |
| 116 | }; |
| 117 | static struct clk tc0_clk = { |
| 118 | .name = "tc0_clk", |
| 119 | .pmc_mask = 1 << AT91SAM9RL_ID_TC0, |
| 120 | .type = CLK_TYPE_PERIPHERAL, |
| 121 | }; |
| 122 | static struct clk tc1_clk = { |
| 123 | .name = "tc1_clk", |
| 124 | .pmc_mask = 1 << AT91SAM9RL_ID_TC1, |
| 125 | .type = CLK_TYPE_PERIPHERAL, |
| 126 | }; |
| 127 | static struct clk tc2_clk = { |
| 128 | .name = "tc2_clk", |
| 129 | .pmc_mask = 1 << AT91SAM9RL_ID_TC2, |
| 130 | .type = CLK_TYPE_PERIPHERAL, |
| 131 | }; |
| 132 | static struct clk pwmc_clk = { |
| 133 | .name = "pwmc_clk", |
| 134 | .pmc_mask = 1 << AT91SAM9RL_ID_PWMC, |
| 135 | .type = CLK_TYPE_PERIPHERAL, |
| 136 | }; |
| 137 | static struct clk tsc_clk = { |
| 138 | .name = "tsc_clk", |
| 139 | .pmc_mask = 1 << AT91SAM9RL_ID_TSC, |
| 140 | .type = CLK_TYPE_PERIPHERAL, |
| 141 | }; |
| 142 | static struct clk dma_clk = { |
| 143 | .name = "dma_clk", |
| 144 | .pmc_mask = 1 << AT91SAM9RL_ID_DMA, |
| 145 | .type = CLK_TYPE_PERIPHERAL, |
| 146 | }; |
| 147 | static struct clk udphs_clk = { |
| 148 | .name = "udphs_clk", |
| 149 | .pmc_mask = 1 << AT91SAM9RL_ID_UDPHS, |
| 150 | .type = CLK_TYPE_PERIPHERAL, |
| 151 | }; |
| 152 | static struct clk lcdc_clk = { |
| 153 | .name = "lcdc_clk", |
| 154 | .pmc_mask = 1 << AT91SAM9RL_ID_LCDC, |
| 155 | .type = CLK_TYPE_PERIPHERAL, |
| 156 | }; |
| 157 | static struct clk ac97_clk = { |
| 158 | .name = "ac97_clk", |
| 159 | .pmc_mask = 1 << AT91SAM9RL_ID_AC97C, |
| 160 | .type = CLK_TYPE_PERIPHERAL, |
| 161 | }; |
| 162 | |
| 163 | static struct clk *periph_clocks[] __initdata = { |
| 164 | &pioA_clk, |
| 165 | &pioB_clk, |
| 166 | &pioC_clk, |
| 167 | &pioD_clk, |
| 168 | &usart0_clk, |
| 169 | &usart1_clk, |
| 170 | &usart2_clk, |
| 171 | &usart3_clk, |
| 172 | &mmc_clk, |
| 173 | &twi0_clk, |
| 174 | &twi1_clk, |
| 175 | &spi_clk, |
| 176 | &ssc0_clk, |
| 177 | &ssc1_clk, |
| 178 | &tc0_clk, |
| 179 | &tc1_clk, |
| 180 | &tc2_clk, |
| 181 | &pwmc_clk, |
| 182 | &tsc_clk, |
| 183 | &dma_clk, |
| 184 | &udphs_clk, |
| 185 | &lcdc_clk, |
| 186 | &ac97_clk, |
| 187 | // irq0 |
| 188 | }; |
| 189 | |
| 190 | /* |
| 191 | * The two programmable clocks. |
| 192 | * You must configure pin multiplexing to bring these signals out. |
| 193 | */ |
| 194 | static struct clk pck0 = { |
| 195 | .name = "pck0", |
| 196 | .pmc_mask = AT91_PMC_PCK0, |
| 197 | .type = CLK_TYPE_PROGRAMMABLE, |
| 198 | .id = 0, |
| 199 | }; |
| 200 | static struct clk pck1 = { |
| 201 | .name = "pck1", |
| 202 | .pmc_mask = AT91_PMC_PCK1, |
| 203 | .type = CLK_TYPE_PROGRAMMABLE, |
| 204 | .id = 1, |
| 205 | }; |
| 206 | |
| 207 | static void __init at91sam9rl_register_clocks(void) |
| 208 | { |
| 209 | int i; |
| 210 | |
| 211 | for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) |
| 212 | clk_register(periph_clocks[i]); |
| 213 | |
| 214 | clk_register(&pck0); |
| 215 | clk_register(&pck1); |
| 216 | } |
| 217 | |
| 218 | /* -------------------------------------------------------------------- |
| 219 | * GPIO |
| 220 | * -------------------------------------------------------------------- */ |
| 221 | |
| 222 | static struct at91_gpio_bank at91sam9rl_gpio[] = { |
| 223 | { |
| 224 | .id = AT91SAM9RL_ID_PIOA, |
| 225 | .offset = AT91_PIOA, |
| 226 | .clock = &pioA_clk, |
| 227 | }, { |
| 228 | .id = AT91SAM9RL_ID_PIOB, |
| 229 | .offset = AT91_PIOB, |
| 230 | .clock = &pioB_clk, |
| 231 | }, { |
| 232 | .id = AT91SAM9RL_ID_PIOC, |
| 233 | .offset = AT91_PIOC, |
| 234 | .clock = &pioC_clk, |
| 235 | }, { |
| 236 | .id = AT91SAM9RL_ID_PIOD, |
| 237 | .offset = AT91_PIOD, |
| 238 | .clock = &pioD_clk, |
| 239 | } |
| 240 | }; |
| 241 | |
| 242 | static void at91sam9rl_reset(void) |
| 243 | { |
| 244 | at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); |
| 245 | } |
| 246 | |
| 247 | |
| 248 | /* -------------------------------------------------------------------- |
| 249 | * AT91SAM9RL processor initialization |
| 250 | * -------------------------------------------------------------------- */ |
| 251 | |
| 252 | void __init at91sam9rl_initialize(unsigned long main_clock) |
| 253 | { |
| 254 | unsigned long cidr, sram_size; |
| 255 | |
| 256 | /* Map peripherals */ |
| 257 | iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc)); |
| 258 | |
| 259 | cidr = at91_sys_read(AT91_DBGU_CIDR); |
| 260 | |
| 261 | switch (cidr & AT91_CIDR_SRAMSIZ) { |
| 262 | case AT91_CIDR_SRAMSIZ_32K: |
| 263 | sram_size = 2 * SZ_16K; |
| 264 | break; |
| 265 | case AT91_CIDR_SRAMSIZ_16K: |
| 266 | default: |
| 267 | sram_size = SZ_16K; |
| 268 | } |
| 269 | |
| 270 | at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; |
| 271 | at91sam9rl_sram_desc->length = sram_size; |
| 272 | |
| 273 | /* Map SRAM */ |
| 274 | iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); |
| 275 | |
| 276 | at91_arch_reset = at91sam9rl_reset; |
| 277 | at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); |
| 278 | |
| 279 | /* Init clock subsystem */ |
| 280 | at91_clock_init(main_clock); |
| 281 | |
| 282 | /* Register the processor-specific clocks */ |
| 283 | at91sam9rl_register_clocks(); |
| 284 | |
| 285 | /* Register GPIO subsystem */ |
| 286 | at91_gpio_init(at91sam9rl_gpio, 4); |
| 287 | } |
| 288 | |
| 289 | /* -------------------------------------------------------------------- |
| 290 | * Interrupt initialization |
| 291 | * -------------------------------------------------------------------- */ |
| 292 | |
| 293 | /* |
| 294 | * The default interrupt priority levels (0 = lowest, 7 = highest). |
| 295 | */ |
| 296 | static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { |
| 297 | 7, /* Advanced Interrupt Controller */ |
| 298 | 7, /* System Peripherals */ |
| 299 | 1, /* Parallel IO Controller A */ |
| 300 | 1, /* Parallel IO Controller B */ |
| 301 | 1, /* Parallel IO Controller C */ |
| 302 | 1, /* Parallel IO Controller D */ |
| 303 | 5, /* USART 0 */ |
| 304 | 5, /* USART 1 */ |
| 305 | 5, /* USART 2 */ |
| 306 | 5, /* USART 3 */ |
| 307 | 0, /* Multimedia Card Interface */ |
| 308 | 6, /* Two-Wire Interface 0 */ |
| 309 | 6, /* Two-Wire Interface 1 */ |
| 310 | 5, /* Serial Peripheral Interface */ |
| 311 | 4, /* Serial Synchronous Controller 0 */ |
| 312 | 4, /* Serial Synchronous Controller 1 */ |
| 313 | 0, /* Timer Counter 0 */ |
| 314 | 0, /* Timer Counter 1 */ |
| 315 | 0, /* Timer Counter 2 */ |
| 316 | 0, |
| 317 | 0, /* Touch Screen Controller */ |
| 318 | 0, /* DMA Controller */ |
| 319 | 2, /* USB Device High speed port */ |
| 320 | 2, /* LCD Controller */ |
| 321 | 6, /* AC97 Controller */ |
| 322 | 0, |
| 323 | 0, |
| 324 | 0, |
| 325 | 0, |
| 326 | 0, |
| 327 | 0, |
| 328 | 0, /* Advanced Interrupt Controller */ |
| 329 | }; |
| 330 | |
| 331 | void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS]) |
| 332 | { |
| 333 | if (!priority) |
| 334 | priority = at91sam9rl_default_irq_priority; |
| 335 | |
| 336 | /* Initialize the AIC interrupt controller */ |
| 337 | at91_aic_init(priority); |
| 338 | |
| 339 | /* Enable GPIO interrupts */ |
| 340 | at91_gpio_irq_setup(); |
| 341 | } |