blob: fbd29f00fca05e5dc46e09d1aa10c9f619283097 [file] [log] [blame]
Jan Glauberba3869f2017-03-30 17:31:24 +02001/*
2 * Shared part of driver for MMC/SDHC controller on Cavium OCTEON and
3 * ThunderX SOCs.
4 *
5 * This file is subject to the terms and conditions of the GNU General Public
6 * License. See the file "COPYING" in the main directory of this archive
7 * for more details.
8 *
9 * Copyright (C) 2012-2017 Cavium Inc.
10 * Authors:
11 * David Daney <david.daney@cavium.com>
12 * Peter Swain <pswain@cavium.com>
13 * Steven J. Hill <steven.hill@cavium.com>
14 * Jan Glauber <jglauber@cavium.com>
15 */
16#include <linux/bitfield.h>
17#include <linux/delay.h>
18#include <linux/dma-direction.h>
19#include <linux/dma-mapping.h>
20#include <linux/gpio/consumer.h>
21#include <linux/interrupt.h>
22#include <linux/mmc/mmc.h>
23#include <linux/mmc/slot-gpio.h>
24#include <linux/module.h>
25#include <linux/regulator/consumer.h>
26#include <linux/scatterlist.h>
27#include <linux/time.h>
28
29#include "cavium.h"
30
31const char *cvm_mmc_irq_names[] = {
32 "MMC Buffer",
33 "MMC Command",
34 "MMC DMA",
35 "MMC Command Error",
36 "MMC DMA Error",
37 "MMC Switch",
38 "MMC Switch Error",
39 "MMC DMA int Fifo",
40 "MMC DMA int",
41};
42
43/*
44 * The Cavium MMC host hardware assumes that all commands have fixed
45 * command and response types. These are correct if MMC devices are
46 * being used. However, non-MMC devices like SD use command and
47 * response types that are unexpected by the host hardware.
48 *
49 * The command and response types can be overridden by supplying an
50 * XOR value that is applied to the type. We calculate the XOR value
51 * from the values in this table and the flags passed from the MMC
52 * core.
53 */
54static struct cvm_mmc_cr_type cvm_mmc_cr_types[] = {
55 {0, 0}, /* CMD0 */
56 {0, 3}, /* CMD1 */
57 {0, 2}, /* CMD2 */
58 {0, 1}, /* CMD3 */
59 {0, 0}, /* CMD4 */
60 {0, 1}, /* CMD5 */
61 {0, 1}, /* CMD6 */
62 {0, 1}, /* CMD7 */
63 {1, 1}, /* CMD8 */
64 {0, 2}, /* CMD9 */
65 {0, 2}, /* CMD10 */
66 {1, 1}, /* CMD11 */
67 {0, 1}, /* CMD12 */
68 {0, 1}, /* CMD13 */
69 {1, 1}, /* CMD14 */
70 {0, 0}, /* CMD15 */
71 {0, 1}, /* CMD16 */
72 {1, 1}, /* CMD17 */
73 {1, 1}, /* CMD18 */
74 {3, 1}, /* CMD19 */
75 {2, 1}, /* CMD20 */
76 {0, 0}, /* CMD21 */
77 {0, 0}, /* CMD22 */
78 {0, 1}, /* CMD23 */
79 {2, 1}, /* CMD24 */
80 {2, 1}, /* CMD25 */
81 {2, 1}, /* CMD26 */
82 {2, 1}, /* CMD27 */
83 {0, 1}, /* CMD28 */
84 {0, 1}, /* CMD29 */
85 {1, 1}, /* CMD30 */
86 {1, 1}, /* CMD31 */
87 {0, 0}, /* CMD32 */
88 {0, 0}, /* CMD33 */
89 {0, 0}, /* CMD34 */
90 {0, 1}, /* CMD35 */
91 {0, 1}, /* CMD36 */
92 {0, 0}, /* CMD37 */
93 {0, 1}, /* CMD38 */
94 {0, 4}, /* CMD39 */
95 {0, 5}, /* CMD40 */
96 {0, 0}, /* CMD41 */
97 {2, 1}, /* CMD42 */
98 {0, 0}, /* CMD43 */
99 {0, 0}, /* CMD44 */
100 {0, 0}, /* CMD45 */
101 {0, 0}, /* CMD46 */
102 {0, 0}, /* CMD47 */
103 {0, 0}, /* CMD48 */
104 {0, 0}, /* CMD49 */
105 {0, 0}, /* CMD50 */
106 {0, 0}, /* CMD51 */
107 {0, 0}, /* CMD52 */
108 {0, 0}, /* CMD53 */
109 {0, 0}, /* CMD54 */
110 {0, 1}, /* CMD55 */
111 {0xff, 0xff}, /* CMD56 */
112 {0, 0}, /* CMD57 */
113 {0, 0}, /* CMD58 */
114 {0, 0}, /* CMD59 */
115 {0, 0}, /* CMD60 */
116 {0, 0}, /* CMD61 */
117 {0, 0}, /* CMD62 */
118 {0, 0} /* CMD63 */
119};
120
121static struct cvm_mmc_cr_mods cvm_mmc_get_cr_mods(struct mmc_command *cmd)
122{
123 struct cvm_mmc_cr_type *cr;
124 u8 hardware_ctype, hardware_rtype;
125 u8 desired_ctype = 0, desired_rtype = 0;
126 struct cvm_mmc_cr_mods r;
127
128 cr = cvm_mmc_cr_types + (cmd->opcode & 0x3f);
129 hardware_ctype = cr->ctype;
130 hardware_rtype = cr->rtype;
131 if (cmd->opcode == MMC_GEN_CMD)
132 hardware_ctype = (cmd->arg & 1) ? 1 : 2;
133
134 switch (mmc_cmd_type(cmd)) {
135 case MMC_CMD_ADTC:
136 desired_ctype = (cmd->data->flags & MMC_DATA_WRITE) ? 2 : 1;
137 break;
138 case MMC_CMD_AC:
139 case MMC_CMD_BC:
140 case MMC_CMD_BCR:
141 desired_ctype = 0;
142 break;
143 }
144
145 switch (mmc_resp_type(cmd)) {
146 case MMC_RSP_NONE:
147 desired_rtype = 0;
148 break;
149 case MMC_RSP_R1:/* MMC_RSP_R5, MMC_RSP_R6, MMC_RSP_R7 */
150 case MMC_RSP_R1B:
151 desired_rtype = 1;
152 break;
153 case MMC_RSP_R2:
154 desired_rtype = 2;
155 break;
156 case MMC_RSP_R3: /* MMC_RSP_R4 */
157 desired_rtype = 3;
158 break;
159 }
160 r.ctype_xor = desired_ctype ^ hardware_ctype;
161 r.rtype_xor = desired_rtype ^ hardware_rtype;
162 return r;
163}
164
165static void check_switch_errors(struct cvm_mmc_host *host)
166{
167 u64 emm_switch;
168
169 emm_switch = readq(host->base + MIO_EMM_SWITCH(host));
170 if (emm_switch & MIO_EMM_SWITCH_ERR0)
171 dev_err(host->dev, "Switch power class error\n");
172 if (emm_switch & MIO_EMM_SWITCH_ERR1)
173 dev_err(host->dev, "Switch hs timing error\n");
174 if (emm_switch & MIO_EMM_SWITCH_ERR2)
175 dev_err(host->dev, "Switch bus width error\n");
176}
177
178static void clear_bus_id(u64 *reg)
179{
180 u64 bus_id_mask = GENMASK_ULL(61, 60);
181
182 *reg &= ~bus_id_mask;
183}
184
185static void set_bus_id(u64 *reg, int bus_id)
186{
187 clear_bus_id(reg);
188 *reg |= FIELD_PREP(GENMASK(61, 60), bus_id);
189}
190
191static int get_bus_id(u64 reg)
192{
193 return FIELD_GET(GENMASK_ULL(61, 60), reg);
194}
195
196/*
197 * We never set the switch_exe bit since that would interfere
198 * with the commands send by the MMC core.
199 */
200static void do_switch(struct cvm_mmc_host *host, u64 emm_switch)
201{
202 int retries = 100;
203 u64 rsp_sts;
204 int bus_id;
205
206 /*
207 * Modes setting only taken from slot 0. Work around that hardware
208 * issue by first switching to slot 0.
209 */
210 bus_id = get_bus_id(emm_switch);
211 clear_bus_id(&emm_switch);
212 writeq(emm_switch, host->base + MIO_EMM_SWITCH(host));
213
214 set_bus_id(&emm_switch, bus_id);
215 writeq(emm_switch, host->base + MIO_EMM_SWITCH(host));
216
217 /* wait for the switch to finish */
218 do {
219 rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
220 if (!(rsp_sts & MIO_EMM_RSP_STS_SWITCH_VAL))
221 break;
222 udelay(10);
223 } while (--retries);
224
225 check_switch_errors(host);
226}
227
228static bool switch_val_changed(struct cvm_mmc_slot *slot, u64 new_val)
229{
230 /* Match BUS_ID, HS_TIMING, BUS_WIDTH, POWER_CLASS, CLK_HI, CLK_LO */
231 u64 match = 0x3001070fffffffffull;
232
233 return (slot->cached_switch & match) != (new_val & match);
234}
235
236static void set_wdog(struct cvm_mmc_slot *slot, unsigned int ns)
237{
238 u64 timeout;
239
240 if (!slot->clock)
241 return;
242
243 if (ns)
244 timeout = (slot->clock * ns) / NSEC_PER_SEC;
245 else
246 timeout = (slot->clock * 850ull) / 1000ull;
247 writeq(timeout, slot->host->base + MIO_EMM_WDOG(slot->host));
248}
249
250static void cvm_mmc_reset_bus(struct cvm_mmc_slot *slot)
251{
252 struct cvm_mmc_host *host = slot->host;
253 u64 emm_switch, wdog;
254
255 emm_switch = readq(slot->host->base + MIO_EMM_SWITCH(host));
256 emm_switch &= ~(MIO_EMM_SWITCH_EXE | MIO_EMM_SWITCH_ERR0 |
257 MIO_EMM_SWITCH_ERR1 | MIO_EMM_SWITCH_ERR2);
258 set_bus_id(&emm_switch, slot->bus_id);
259
260 wdog = readq(slot->host->base + MIO_EMM_WDOG(host));
261 do_switch(slot->host, emm_switch);
262
263 slot->cached_switch = emm_switch;
264
265 msleep(20);
266
267 writeq(wdog, slot->host->base + MIO_EMM_WDOG(host));
268}
269
270/* Switch to another slot if needed */
271static void cvm_mmc_switch_to(struct cvm_mmc_slot *slot)
272{
273 struct cvm_mmc_host *host = slot->host;
274 struct cvm_mmc_slot *old_slot;
275 u64 emm_sample, emm_switch;
276
277 if (slot->bus_id == host->last_slot)
278 return;
279
280 if (host->last_slot >= 0 && host->slot[host->last_slot]) {
281 old_slot = host->slot[host->last_slot];
282 old_slot->cached_switch = readq(host->base + MIO_EMM_SWITCH(host));
283 old_slot->cached_rca = readq(host->base + MIO_EMM_RCA(host));
284 }
285
286 writeq(slot->cached_rca, host->base + MIO_EMM_RCA(host));
287 emm_switch = slot->cached_switch;
288 set_bus_id(&emm_switch, slot->bus_id);
289 do_switch(host, emm_switch);
290
291 emm_sample = FIELD_PREP(MIO_EMM_SAMPLE_CMD_CNT, slot->cmd_cnt) |
292 FIELD_PREP(MIO_EMM_SAMPLE_DAT_CNT, slot->dat_cnt);
293 writeq(emm_sample, host->base + MIO_EMM_SAMPLE(host));
294
295 host->last_slot = slot->bus_id;
296}
297
298static void do_read(struct cvm_mmc_host *host, struct mmc_request *req,
299 u64 dbuf)
300{
301 struct sg_mapping_iter *smi = &host->smi;
302 int data_len = req->data->blocks * req->data->blksz;
303 int bytes_xfered, shift = -1;
304 u64 dat = 0;
305
306 /* Auto inc from offset zero */
307 writeq((0x10000 | (dbuf << 6)), host->base + MIO_EMM_BUF_IDX(host));
308
309 for (bytes_xfered = 0; bytes_xfered < data_len;) {
310 if (smi->consumed >= smi->length) {
311 if (!sg_miter_next(smi))
312 break;
313 smi->consumed = 0;
314 }
315
316 if (shift < 0) {
317 dat = readq(host->base + MIO_EMM_BUF_DAT(host));
318 shift = 56;
319 }
320
321 while (smi->consumed < smi->length && shift >= 0) {
322 ((u8 *)smi->addr)[smi->consumed] = (dat >> shift) & 0xff;
323 bytes_xfered++;
324 smi->consumed++;
325 shift -= 8;
326 }
327 }
328
329 sg_miter_stop(smi);
330 req->data->bytes_xfered = bytes_xfered;
331 req->data->error = 0;
332}
333
334static void do_write(struct mmc_request *req)
335{
336 req->data->bytes_xfered = req->data->blocks * req->data->blksz;
337 req->data->error = 0;
338}
339
340static void set_cmd_response(struct cvm_mmc_host *host, struct mmc_request *req,
341 u64 rsp_sts)
342{
343 u64 rsp_hi, rsp_lo;
344
345 if (!(rsp_sts & MIO_EMM_RSP_STS_RSP_VAL))
346 return;
347
348 rsp_lo = readq(host->base + MIO_EMM_RSP_LO(host));
349
350 switch (FIELD_GET(MIO_EMM_RSP_STS_RSP_TYPE, rsp_sts)) {
351 case 1:
352 case 3:
353 req->cmd->resp[0] = (rsp_lo >> 8) & 0xffffffff;
354 req->cmd->resp[1] = 0;
355 req->cmd->resp[2] = 0;
356 req->cmd->resp[3] = 0;
357 break;
358 case 2:
359 req->cmd->resp[3] = rsp_lo & 0xffffffff;
360 req->cmd->resp[2] = (rsp_lo >> 32) & 0xffffffff;
361 rsp_hi = readq(host->base + MIO_EMM_RSP_HI(host));
362 req->cmd->resp[1] = rsp_hi & 0xffffffff;
363 req->cmd->resp[0] = (rsp_hi >> 32) & 0xffffffff;
364 break;
365 }
366}
367
368static int get_dma_dir(struct mmc_data *data)
369{
370 return (data->flags & MMC_DATA_WRITE) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
371}
372
373static int finish_dma_single(struct cvm_mmc_host *host, struct mmc_data *data)
374{
375 data->bytes_xfered = data->blocks * data->blksz;
376 data->error = 0;
377 return 1;
378}
379
Jan Glaubercd76e5c2017-03-30 17:31:26 +0200380static int finish_dma_sg(struct cvm_mmc_host *host, struct mmc_data *data)
381{
382 u64 fifo_cfg;
383 int count;
384
385 /* Check if there are any pending requests left */
386 fifo_cfg = readq(host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
387 count = FIELD_GET(MIO_EMM_DMA_FIFO_CFG_COUNT, fifo_cfg);
388 if (count)
389 dev_err(host->dev, "%u requests still pending\n", count);
390
391 data->bytes_xfered = data->blocks * data->blksz;
392 data->error = 0;
393
394 /* Clear and disable FIFO */
395 writeq(BIT_ULL(16), host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
396 dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
397 return 1;
398}
399
Jan Glauberba3869f2017-03-30 17:31:24 +0200400static int finish_dma(struct cvm_mmc_host *host, struct mmc_data *data)
401{
Jan Glaubercd76e5c2017-03-30 17:31:26 +0200402 if (host->use_sg && data->sg_len > 1)
403 return finish_dma_sg(host, data);
404 else
405 return finish_dma_single(host, data);
Jan Glauberba3869f2017-03-30 17:31:24 +0200406}
407
408static int check_status(u64 rsp_sts)
409{
410 if (rsp_sts & MIO_EMM_RSP_STS_RSP_BAD_STS ||
411 rsp_sts & MIO_EMM_RSP_STS_RSP_CRC_ERR ||
412 rsp_sts & MIO_EMM_RSP_STS_BLK_CRC_ERR)
413 return -EILSEQ;
414 if (rsp_sts & MIO_EMM_RSP_STS_RSP_TIMEOUT ||
415 rsp_sts & MIO_EMM_RSP_STS_BLK_TIMEOUT)
416 return -ETIMEDOUT;
417 if (rsp_sts & MIO_EMM_RSP_STS_DBUF_ERR)
418 return -EIO;
419 return 0;
420}
421
422/* Try to clean up failed DMA. */
423static void cleanup_dma(struct cvm_mmc_host *host, u64 rsp_sts)
424{
425 u64 emm_dma;
426
427 emm_dma = readq(host->base + MIO_EMM_DMA(host));
428 emm_dma |= FIELD_PREP(MIO_EMM_DMA_VAL, 1) |
429 FIELD_PREP(MIO_EMM_DMA_DAT_NULL, 1);
430 set_bus_id(&emm_dma, get_bus_id(rsp_sts));
431 writeq(emm_dma, host->base + MIO_EMM_DMA(host));
432}
433
434irqreturn_t cvm_mmc_interrupt(int irq, void *dev_id)
435{
436 struct cvm_mmc_host *host = dev_id;
437 struct mmc_request *req;
438 unsigned long flags = 0;
439 u64 emm_int, rsp_sts;
440 bool host_done;
441
442 if (host->need_irq_handler_lock)
443 spin_lock_irqsave(&host->irq_handler_lock, flags);
444 else
445 __acquire(&host->irq_handler_lock);
446
447 /* Clear interrupt bits (write 1 clears ). */
448 emm_int = readq(host->base + MIO_EMM_INT(host));
449 writeq(emm_int, host->base + MIO_EMM_INT(host));
450
451 if (emm_int & MIO_EMM_INT_SWITCH_ERR)
452 check_switch_errors(host);
453
454 req = host->current_req;
455 if (!req)
456 goto out;
457
458 rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
459 /*
460 * dma_val set means DMA is still in progress. Don't touch
461 * the request and wait for the interrupt indicating that
462 * the DMA is finished.
463 */
464 if ((rsp_sts & MIO_EMM_RSP_STS_DMA_VAL) && host->dma_active)
465 goto out;
466
467 if (!host->dma_active && req->data &&
468 (emm_int & MIO_EMM_INT_BUF_DONE)) {
469 unsigned int type = (rsp_sts >> 7) & 3;
470
471 if (type == 1)
472 do_read(host, req, rsp_sts & MIO_EMM_RSP_STS_DBUF);
473 else if (type == 2)
474 do_write(req);
475 }
476
477 host_done = emm_int & MIO_EMM_INT_CMD_DONE ||
478 emm_int & MIO_EMM_INT_DMA_DONE ||
479 emm_int & MIO_EMM_INT_CMD_ERR ||
480 emm_int & MIO_EMM_INT_DMA_ERR;
481
482 if (!(host_done && req->done))
483 goto no_req_done;
484
485 req->cmd->error = check_status(rsp_sts);
486
487 if (host->dma_active && req->data)
488 if (!finish_dma(host, req->data))
489 goto no_req_done;
490
491 set_cmd_response(host, req, rsp_sts);
492 if ((emm_int & MIO_EMM_INT_DMA_ERR) &&
493 (rsp_sts & MIO_EMM_RSP_STS_DMA_PEND))
494 cleanup_dma(host, rsp_sts);
495
496 host->current_req = NULL;
497 req->done(req);
498
499no_req_done:
500 if (host->dmar_fixup_done)
501 host->dmar_fixup_done(host);
502 if (host_done)
503 host->release_bus(host);
504out:
505 if (host->need_irq_handler_lock)
506 spin_unlock_irqrestore(&host->irq_handler_lock, flags);
507 else
508 __release(&host->irq_handler_lock);
509 return IRQ_RETVAL(emm_int != 0);
510}
511
512/*
513 * Program DMA_CFG and if needed DMA_ADR.
514 * Returns 0 on error, DMA address otherwise.
515 */
516static u64 prepare_dma_single(struct cvm_mmc_host *host, struct mmc_data *data)
517{
518 u64 dma_cfg, addr;
519 int count, rw;
520
521 count = dma_map_sg(host->dev, data->sg, data->sg_len,
522 get_dma_dir(data));
523 if (!count)
524 return 0;
525
526 rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
527 dma_cfg = FIELD_PREP(MIO_EMM_DMA_CFG_EN, 1) |
528 FIELD_PREP(MIO_EMM_DMA_CFG_RW, rw);
529#ifdef __LITTLE_ENDIAN
530 dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_ENDIAN, 1);
531#endif
532 dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_SIZE,
533 (sg_dma_len(&data->sg[0]) / 8) - 1);
534
535 addr = sg_dma_address(&data->sg[0]);
536 if (!host->big_dma_addr)
537 dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_ADR, addr);
538 writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host));
539
540 pr_debug("[%s] sg_dma_len: %u total sg_elem: %d\n",
541 (rw) ? "W" : "R", sg_dma_len(&data->sg[0]), count);
542
543 if (host->big_dma_addr)
544 writeq(addr, host->dma_base + MIO_EMM_DMA_ADR(host));
545 return addr;
546}
547
Jan Glaubercd76e5c2017-03-30 17:31:26 +0200548/*
549 * Queue complete sg list into the FIFO.
550 * Returns 0 on error, 1 otherwise.
551 */
552static u64 prepare_dma_sg(struct cvm_mmc_host *host, struct mmc_data *data)
553{
554 struct scatterlist *sg;
555 u64 fifo_cmd, addr;
556 int count, i, rw;
557
558 count = dma_map_sg(host->dev, data->sg, data->sg_len,
559 get_dma_dir(data));
560 if (!count)
561 return 0;
562 if (count > 16)
563 goto error;
564
565 /* Enable FIFO by removing CLR bit */
566 writeq(0, host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
567
568 for_each_sg(data->sg, sg, count, i) {
569 /* Program DMA address */
570 addr = sg_dma_address(sg);
571 if (addr & 7)
572 goto error;
573 writeq(addr, host->dma_base + MIO_EMM_DMA_FIFO_ADR(host));
574
575 /*
576 * If we have scatter-gather support we also have an extra
577 * register for the DMA addr, so no need to check
578 * host->big_dma_addr here.
579 */
580 rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
581 fifo_cmd = FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_RW, rw);
582
583 /* enable interrupts on the last element */
584 fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_INTDIS,
585 (i + 1 == count) ? 0 : 1);
586
587#ifdef __LITTLE_ENDIAN
588 fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_ENDIAN, 1);
589#endif
590 fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_SIZE,
591 sg_dma_len(sg) / 8 - 1);
592 /*
593 * The write copies the address and the command to the FIFO
594 * and increments the FIFO's COUNT field.
595 */
596 writeq(fifo_cmd, host->dma_base + MIO_EMM_DMA_FIFO_CMD(host));
597 pr_debug("[%s] sg_dma_len: %u sg_elem: %d/%d\n",
598 (rw) ? "W" : "R", sg_dma_len(sg), i, count);
599 }
600
601 /*
602 * In difference to prepare_dma_single we don't return the
603 * address here, as it would not make sense for scatter-gather.
604 * The dma fixup is only required on models that don't support
605 * scatter-gather, so that is not a problem.
606 */
607 return 1;
608
609error:
610 WARN_ON_ONCE(1);
611 dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
612 /* Disable FIFO */
613 writeq(BIT_ULL(16), host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
614 return 0;
615}
616
Jan Glauberba3869f2017-03-30 17:31:24 +0200617static u64 prepare_dma(struct cvm_mmc_host *host, struct mmc_data *data)
618{
Jan Glaubercd76e5c2017-03-30 17:31:26 +0200619 if (host->use_sg && data->sg_len > 1)
620 return prepare_dma_sg(host, data);
621 else
622 return prepare_dma_single(host, data);
Jan Glauberba3869f2017-03-30 17:31:24 +0200623}
624
625static u64 prepare_ext_dma(struct mmc_host *mmc, struct mmc_request *mrq)
626{
627 struct cvm_mmc_slot *slot = mmc_priv(mmc);
628 u64 emm_dma;
629
630 emm_dma = FIELD_PREP(MIO_EMM_DMA_VAL, 1) |
631 FIELD_PREP(MIO_EMM_DMA_SECTOR,
Steven J. Hilldceb9782017-04-24 13:41:56 -0500632 mmc_card_is_blockaddr(mmc->card) ? 1 : 0) |
Jan Glauberba3869f2017-03-30 17:31:24 +0200633 FIELD_PREP(MIO_EMM_DMA_RW,
634 (mrq->data->flags & MMC_DATA_WRITE) ? 1 : 0) |
635 FIELD_PREP(MIO_EMM_DMA_BLOCK_CNT, mrq->data->blocks) |
636 FIELD_PREP(MIO_EMM_DMA_CARD_ADDR, mrq->cmd->arg);
637 set_bus_id(&emm_dma, slot->bus_id);
638
639 if (mmc_card_mmc(mmc->card) || (mmc_card_sd(mmc->card) &&
640 (mmc->card->scr.cmds & SD_SCR_CMD23_SUPPORT)))
641 emm_dma |= FIELD_PREP(MIO_EMM_DMA_MULTI, 1);
642
643 pr_debug("[%s] blocks: %u multi: %d\n",
644 (emm_dma & MIO_EMM_DMA_RW) ? "W" : "R",
645 mrq->data->blocks, (emm_dma & MIO_EMM_DMA_MULTI) ? 1 : 0);
646 return emm_dma;
647}
648
649static void cvm_mmc_dma_request(struct mmc_host *mmc,
650 struct mmc_request *mrq)
651{
652 struct cvm_mmc_slot *slot = mmc_priv(mmc);
653 struct cvm_mmc_host *host = slot->host;
654 struct mmc_data *data;
655 u64 emm_dma, addr;
656
657 if (!mrq->data || !mrq->data->sg || !mrq->data->sg_len ||
658 !mrq->stop || mrq->stop->opcode != MMC_STOP_TRANSMISSION) {
659 dev_err(&mmc->card->dev,
660 "Error: cmv_mmc_dma_request no data\n");
661 goto error;
662 }
663
664 cvm_mmc_switch_to(slot);
665
666 data = mrq->data;
667 pr_debug("DMA request blocks: %d block_size: %d total_size: %d\n",
668 data->blocks, data->blksz, data->blocks * data->blksz);
669 if (data->timeout_ns)
670 set_wdog(slot, data->timeout_ns);
671
672 WARN_ON(host->current_req);
673 host->current_req = mrq;
674
675 emm_dma = prepare_ext_dma(mmc, mrq);
676 addr = prepare_dma(host, data);
677 if (!addr) {
678 dev_err(host->dev, "prepare_dma failed\n");
679 goto error;
680 }
681
682 host->dma_active = true;
683 host->int_enable(host, MIO_EMM_INT_CMD_ERR | MIO_EMM_INT_DMA_DONE |
684 MIO_EMM_INT_DMA_ERR);
685
686 if (host->dmar_fixup)
687 host->dmar_fixup(host, mrq->cmd, data, addr);
688
689 /*
690 * If we have a valid SD card in the slot, we set the response
691 * bit mask to check for CRC errors and timeouts only.
692 * Otherwise, use the default power reset value.
693 */
Jan Glauberc34d1572017-04-13 14:10:50 +0200694 if (mmc_card_sd(mmc->card))
Jan Glauberba3869f2017-03-30 17:31:24 +0200695 writeq(0x00b00000ull, host->base + MIO_EMM_STS_MASK(host));
696 else
697 writeq(0xe4390080ull, host->base + MIO_EMM_STS_MASK(host));
698 writeq(emm_dma, host->base + MIO_EMM_DMA(host));
699 return;
700
701error:
702 mrq->cmd->error = -EINVAL;
703 if (mrq->done)
704 mrq->done(mrq);
705 host->release_bus(host);
706}
707
708static void do_read_request(struct cvm_mmc_host *host, struct mmc_request *mrq)
709{
710 sg_miter_start(&host->smi, mrq->data->sg, mrq->data->sg_len,
711 SG_MITER_ATOMIC | SG_MITER_TO_SG);
712}
713
714static void do_write_request(struct cvm_mmc_host *host, struct mmc_request *mrq)
715{
716 unsigned int data_len = mrq->data->blocks * mrq->data->blksz;
717 struct sg_mapping_iter *smi = &host->smi;
718 unsigned int bytes_xfered;
719 int shift = 56;
720 u64 dat = 0;
721
722 /* Copy data to the xmit buffer before issuing the command. */
723 sg_miter_start(smi, mrq->data->sg, mrq->data->sg_len, SG_MITER_FROM_SG);
724
725 /* Auto inc from offset zero, dbuf zero */
726 writeq(0x10000ull, host->base + MIO_EMM_BUF_IDX(host));
727
728 for (bytes_xfered = 0; bytes_xfered < data_len;) {
729 if (smi->consumed >= smi->length) {
730 if (!sg_miter_next(smi))
731 break;
732 smi->consumed = 0;
733 }
734
735 while (smi->consumed < smi->length && shift >= 0) {
Dan Carpenter3fcc7832017-04-13 22:47:48 +0300736 dat |= (u64)((u8 *)smi->addr)[smi->consumed] << shift;
Jan Glauberba3869f2017-03-30 17:31:24 +0200737 bytes_xfered++;
738 smi->consumed++;
739 shift -= 8;
740 }
741
742 if (shift < 0) {
743 writeq(dat, host->base + MIO_EMM_BUF_DAT(host));
744 shift = 56;
745 dat = 0;
746 }
747 }
748 sg_miter_stop(smi);
749}
750
751static void cvm_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
752{
753 struct cvm_mmc_slot *slot = mmc_priv(mmc);
754 struct cvm_mmc_host *host = slot->host;
755 struct mmc_command *cmd = mrq->cmd;
756 struct cvm_mmc_cr_mods mods;
757 u64 emm_cmd, rsp_sts;
758 int retries = 100;
759
760 /*
761 * Note about locking:
762 * All MMC devices share the same bus and controller. Allow only a
763 * single user of the bootbus/MMC bus at a time. The lock is acquired
764 * on all entry points from the MMC layer.
765 *
766 * For requests the lock is only released after the completion
767 * interrupt!
768 */
769 host->acquire_bus(host);
770
771 if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
772 cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK)
773 return cvm_mmc_dma_request(mmc, mrq);
774
775 cvm_mmc_switch_to(slot);
776
777 mods = cvm_mmc_get_cr_mods(cmd);
778
779 WARN_ON(host->current_req);
780 host->current_req = mrq;
781
782 if (cmd->data) {
783 if (cmd->data->flags & MMC_DATA_READ)
784 do_read_request(host, mrq);
785 else
786 do_write_request(host, mrq);
787
788 if (cmd->data->timeout_ns)
789 set_wdog(slot, cmd->data->timeout_ns);
790 } else
791 set_wdog(slot, 0);
792
793 host->dma_active = false;
794 host->int_enable(host, MIO_EMM_INT_CMD_DONE | MIO_EMM_INT_CMD_ERR);
795
796 emm_cmd = FIELD_PREP(MIO_EMM_CMD_VAL, 1) |
797 FIELD_PREP(MIO_EMM_CMD_CTYPE_XOR, mods.ctype_xor) |
798 FIELD_PREP(MIO_EMM_CMD_RTYPE_XOR, mods.rtype_xor) |
799 FIELD_PREP(MIO_EMM_CMD_IDX, cmd->opcode) |
800 FIELD_PREP(MIO_EMM_CMD_ARG, cmd->arg);
801 set_bus_id(&emm_cmd, slot->bus_id);
Jan Glauberfe790182017-04-13 14:10:51 +0200802 if (cmd->data && mmc_cmd_type(cmd) == MMC_CMD_ADTC)
Jan Glauberba3869f2017-03-30 17:31:24 +0200803 emm_cmd |= FIELD_PREP(MIO_EMM_CMD_OFFSET,
804 64 - ((cmd->data->blocks * cmd->data->blksz) / 8));
805
806 writeq(0, host->base + MIO_EMM_STS_MASK(host));
807
808retry:
809 rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
810 if (rsp_sts & MIO_EMM_RSP_STS_DMA_VAL ||
811 rsp_sts & MIO_EMM_RSP_STS_CMD_VAL ||
812 rsp_sts & MIO_EMM_RSP_STS_SWITCH_VAL ||
813 rsp_sts & MIO_EMM_RSP_STS_DMA_PEND) {
814 udelay(10);
815 if (--retries)
816 goto retry;
817 }
818 if (!retries)
819 dev_err(host->dev, "Bad status: %llx before command write\n", rsp_sts);
820 writeq(emm_cmd, host->base + MIO_EMM_CMD(host));
821}
822
823static void cvm_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
824{
825 struct cvm_mmc_slot *slot = mmc_priv(mmc);
826 struct cvm_mmc_host *host = slot->host;
827 int clk_period = 0, power_class = 10, bus_width = 0;
828 u64 clock, emm_switch;
829
830 host->acquire_bus(host);
831 cvm_mmc_switch_to(slot);
832
833 /* Set the power state */
834 switch (ios->power_mode) {
835 case MMC_POWER_ON:
836 break;
837
838 case MMC_POWER_OFF:
839 cvm_mmc_reset_bus(slot);
840 if (host->global_pwr_gpiod)
841 host->set_shared_power(host, 0);
Jan Glauber9e7b9a22017-05-22 13:09:19 +0200842 else if (!IS_ERR(mmc->supply.vmmc))
Jan Glauberba3869f2017-03-30 17:31:24 +0200843 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
844 break;
845
846 case MMC_POWER_UP:
847 if (host->global_pwr_gpiod)
848 host->set_shared_power(host, 1);
Jan Glauber9e7b9a22017-05-22 13:09:19 +0200849 else if (!IS_ERR(mmc->supply.vmmc))
Jan Glauberba3869f2017-03-30 17:31:24 +0200850 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
851 break;
852 }
853
854 /* Convert bus width to HW definition */
855 switch (ios->bus_width) {
856 case MMC_BUS_WIDTH_8:
857 bus_width = 2;
858 break;
859 case MMC_BUS_WIDTH_4:
860 bus_width = 1;
861 break;
862 case MMC_BUS_WIDTH_1:
863 bus_width = 0;
864 break;
865 }
866
Jan Glauber4ce94402017-03-30 17:31:27 +0200867 /* DDR is available for 4/8 bit bus width */
868 if (ios->bus_width && ios->timing == MMC_TIMING_MMC_DDR52)
869 bus_width |= 4;
870
Jan Glauberba3869f2017-03-30 17:31:24 +0200871 /* Change the clock frequency. */
872 clock = ios->clock;
873 if (clock > 52000000)
874 clock = 52000000;
875 slot->clock = clock;
876
877 if (clock)
878 clk_period = (host->sys_freq + clock - 1) / (2 * clock);
879
880 emm_switch = FIELD_PREP(MIO_EMM_SWITCH_HS_TIMING,
881 (ios->timing == MMC_TIMING_MMC_HS)) |
882 FIELD_PREP(MIO_EMM_SWITCH_BUS_WIDTH, bus_width) |
883 FIELD_PREP(MIO_EMM_SWITCH_POWER_CLASS, power_class) |
884 FIELD_PREP(MIO_EMM_SWITCH_CLK_HI, clk_period) |
885 FIELD_PREP(MIO_EMM_SWITCH_CLK_LO, clk_period);
886 set_bus_id(&emm_switch, slot->bus_id);
887
888 if (!switch_val_changed(slot, emm_switch))
889 goto out;
890
891 set_wdog(slot, 0);
892 do_switch(host, emm_switch);
893 slot->cached_switch = emm_switch;
894out:
895 host->release_bus(host);
896}
897
898static const struct mmc_host_ops cvm_mmc_ops = {
899 .request = cvm_mmc_request,
900 .set_ios = cvm_mmc_set_ios,
901 .get_ro = mmc_gpio_get_ro,
902 .get_cd = mmc_gpio_get_cd,
903};
904
905static void cvm_mmc_set_clock(struct cvm_mmc_slot *slot, unsigned int clock)
906{
907 struct mmc_host *mmc = slot->mmc;
908
909 clock = min(clock, mmc->f_max);
910 clock = max(clock, mmc->f_min);
911 slot->clock = clock;
912}
913
914static int cvm_mmc_init_lowlevel(struct cvm_mmc_slot *slot)
915{
916 struct cvm_mmc_host *host = slot->host;
917 u64 emm_switch;
918
919 /* Enable this bus slot. */
920 host->emm_cfg |= (1ull << slot->bus_id);
921 writeq(host->emm_cfg, slot->host->base + MIO_EMM_CFG(host));
922 udelay(10);
923
924 /* Program initial clock speed and power. */
925 cvm_mmc_set_clock(slot, slot->mmc->f_min);
926 emm_switch = FIELD_PREP(MIO_EMM_SWITCH_POWER_CLASS, 10);
927 emm_switch |= FIELD_PREP(MIO_EMM_SWITCH_CLK_HI,
928 (host->sys_freq / slot->clock) / 2);
929 emm_switch |= FIELD_PREP(MIO_EMM_SWITCH_CLK_LO,
930 (host->sys_freq / slot->clock) / 2);
931
932 /* Make the changes take effect on this bus slot. */
933 set_bus_id(&emm_switch, slot->bus_id);
934 do_switch(host, emm_switch);
935
936 slot->cached_switch = emm_switch;
937
938 /*
939 * Set watchdog timeout value and default reset value
940 * for the mask register. Finally, set the CARD_RCA
941 * bit so that we can get the card address relative
942 * to the CMD register for CMD7 transactions.
943 */
944 set_wdog(slot, 0);
945 writeq(0xe4390080ull, host->base + MIO_EMM_STS_MASK(host));
946 writeq(1, host->base + MIO_EMM_RCA(host));
947 return 0;
948}
949
950static int cvm_mmc_of_parse(struct device *dev, struct cvm_mmc_slot *slot)
951{
952 u32 id, cmd_skew = 0, dat_skew = 0, bus_width = 0;
953 struct device_node *node = dev->of_node;
954 struct mmc_host *mmc = slot->mmc;
955 u64 clock_period;
956 int ret;
957
958 ret = of_property_read_u32(node, "reg", &id);
959 if (ret) {
Rob Herringbf892de2017-07-18 16:43:16 -0500960 dev_err(dev, "Missing or invalid reg property on %pOF\n", node);
Jan Glauberba3869f2017-03-30 17:31:24 +0200961 return ret;
962 }
963
964 if (id >= CAVIUM_MAX_MMC || slot->host->slot[id]) {
Rob Herringbf892de2017-07-18 16:43:16 -0500965 dev_err(dev, "Invalid reg property on %pOF\n", node);
Jan Glauberba3869f2017-03-30 17:31:24 +0200966 return -EINVAL;
967 }
968
Jan Glauber9e7b9a22017-05-22 13:09:19 +0200969 ret = mmc_regulator_get_supply(mmc);
970 if (ret == -EPROBE_DEFER)
971 return ret;
972 /*
973 * Legacy Octeon firmware has no regulator entry, fall-back to
974 * a hard-coded voltage to get a sane OCR.
975 */
976 if (IS_ERR(mmc->supply.vmmc))
Jan Glauberba3869f2017-03-30 17:31:24 +0200977 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
Jan Glauberba3869f2017-03-30 17:31:24 +0200978
979 /* Common MMC bindings */
980 ret = mmc_of_parse(mmc);
981 if (ret)
982 return ret;
983
984 /* Set bus width */
985 if (!(mmc->caps & (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA))) {
986 of_property_read_u32(node, "cavium,bus-max-width", &bus_width);
987 if (bus_width == 8)
988 mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
989 else if (bus_width == 4)
990 mmc->caps |= MMC_CAP_4_BIT_DATA;
991 }
992
993 /* Set maximum and minimum frequency */
994 if (!mmc->f_max)
995 of_property_read_u32(node, "spi-max-frequency", &mmc->f_max);
996 if (!mmc->f_max || mmc->f_max > 52000000)
997 mmc->f_max = 52000000;
998 mmc->f_min = 400000;
999
1000 /* Sampling register settings, period in picoseconds */
1001 clock_period = 1000000000000ull / slot->host->sys_freq;
1002 of_property_read_u32(node, "cavium,cmd-clk-skew", &cmd_skew);
1003 of_property_read_u32(node, "cavium,dat-clk-skew", &dat_skew);
1004 slot->cmd_cnt = (cmd_skew + clock_period / 2) / clock_period;
1005 slot->dat_cnt = (dat_skew + clock_period / 2) / clock_period;
1006
1007 return id;
1008}
1009
1010int cvm_mmc_of_slot_probe(struct device *dev, struct cvm_mmc_host *host)
1011{
1012 struct cvm_mmc_slot *slot;
1013 struct mmc_host *mmc;
1014 int ret, id;
1015
1016 mmc = mmc_alloc_host(sizeof(struct cvm_mmc_slot), dev);
1017 if (!mmc)
1018 return -ENOMEM;
1019
1020 slot = mmc_priv(mmc);
1021 slot->mmc = mmc;
1022 slot->host = host;
1023
1024 ret = cvm_mmc_of_parse(dev, slot);
1025 if (ret < 0)
1026 goto error;
1027 id = ret;
1028
1029 /* Set up host parameters */
1030 mmc->ops = &cvm_mmc_ops;
1031
Jan Glauber4ce94402017-03-30 17:31:27 +02001032 /*
1033 * We only have a 3.3v supply, we cannot support any
1034 * of the UHS modes. We do support the high speed DDR
1035 * modes up to 52MHz.
Linus Walleijc3dccb72017-05-18 11:29:31 +02001036 *
1037 * Disable bounce buffers for max_segs = 1
Jan Glauber4ce94402017-03-30 17:31:27 +02001038 */
Jan Glauberba3869f2017-03-30 17:31:24 +02001039 mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
Jan Glauber4ce94402017-03-30 17:31:27 +02001040 MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_POWER_OFF_CARD |
Linus Walleijde3ee992017-09-20 10:56:14 +02001041 MMC_CAP_3_3V_DDR;
Jan Glauberba3869f2017-03-30 17:31:24 +02001042
Jan Glaubercd76e5c2017-03-30 17:31:26 +02001043 if (host->use_sg)
1044 mmc->max_segs = 16;
1045 else
1046 mmc->max_segs = 1;
Jan Glauberba3869f2017-03-30 17:31:24 +02001047
1048 /* DMA size field can address up to 8 MB */
1049 mmc->max_seg_size = 8 * 1024 * 1024;
1050 mmc->max_req_size = mmc->max_seg_size;
1051 /* External DMA is in 512 byte blocks */
1052 mmc->max_blk_size = 512;
1053 /* DMA block count field is 15 bits */
1054 mmc->max_blk_count = 32767;
1055
1056 slot->clock = mmc->f_min;
1057 slot->bus_id = id;
1058 slot->cached_rca = 1;
1059
1060 host->acquire_bus(host);
1061 host->slot[id] = slot;
1062 cvm_mmc_switch_to(slot);
1063 cvm_mmc_init_lowlevel(slot);
1064 host->release_bus(host);
1065
1066 ret = mmc_add_host(mmc);
1067 if (ret) {
1068 dev_err(dev, "mmc_add_host() returned %d\n", ret);
1069 slot->host->slot[id] = NULL;
1070 goto error;
1071 }
1072 return 0;
1073
1074error:
1075 mmc_free_host(slot->mmc);
1076 return ret;
1077}
1078
1079int cvm_mmc_of_slot_remove(struct cvm_mmc_slot *slot)
1080{
1081 mmc_remove_host(slot->mmc);
1082 slot->host->slot[slot->bus_id] = NULL;
1083 mmc_free_host(slot->mmc);
1084 return 0;
1085}