arch/arm/boot/dts/dove-cubox.dts

/dts-v1/;

/include/ "dove.dtsi"

/ {
	model = "SolidRun CuBox";
	compatible = "solidrun,cubox", "marvell,dove";

	memory {
		device_type = "memory";
		reg = <0x00000000 0x40000000>;
	};

	chosen {
		bootargs = "console=ttyS0,115200n8 earlyprintk";
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&pmx_gpio_18>;
		pinctrl-names = "default";

		power {
			label = "Power";
			gpios = <&gpio0 18 1>;
			linux,default-trigger = "default-on";
		};
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		usb_power: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "USB Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio0 1 0>;
		};
	};
};

&uart0 { status = "okay"; };
&sata0 { status = "okay"; };
&i2c0 { status = "okay"; };

&sdio0 {
	status = "okay";
	/* sdio0 card detect is connected to wrong pin on CuBox */
	cd-gpios = <&gpio0 12 1>;
};

&spi0 {
	status = "okay";

	/* spi0.0: 4M Flash Winbond W25Q32BV */
	spi-flash@0 {
		compatible = "st,w25q32";
		spi-max-frequency = <20000000>;
		reg = <0>;
	};
};

&pinctrl {
	pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>;
	pinctrl-names = "default";

	pmx_gpio_1: pmx-gpio-1 {
		marvell,pins = "mpp1";
		marvell,function = "gpio";
	};

	pmx_gpio_12: pmx-gpio-12 {
		marvell,pins = "mpp12";
		marvell,function = "gpio";
	};

	pmx_gpio_18: pmx-gpio-18 {
		marvell,pins = "mpp18";
		marvell,function = "gpio";
	};
};