| James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 1 | /* |
| James Ban | 7bd3935 | 2015-06-30 13:39:39 +0900 | [diff] [blame] | 2 | * da9211-regulator.h - Regulator definitions for DA9211/DA9213/DA9215 |
| 3 | * Copyright (C) 2015 Dialog Semiconductor Ltd. |
| James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 4 | * |
| James Ban | 7bd3935 | 2015-06-30 13:39:39 +0900 | [diff] [blame] | 5 | * This program is free software; you can redistribute it and/or |
| 6 | * modify it under the terms of the GNU General Public License |
| 7 | * as published by the Free Software Foundation; either version 2 |
| 8 | * of the License, or (at your option) any later version. |
| James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 9 | * |
| James Ban | 7bd3935 | 2015-06-30 13:39:39 +0900 | [diff] [blame] | 10 | * This program is distributed in the hope that it will be useful, |
| James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| James Ban | 7bd3935 | 2015-06-30 13:39:39 +0900 | [diff] [blame] | 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 14 | */ |
| 15 | |
| 16 | #ifndef __DA9211_REGISTERS_H__ |
| 17 | #define __DA9211_REGISTERS_H__ |
| 18 | |
| 19 | /* Page selection */ |
| 20 | #define DA9211_REG_PAGE_CON 0x00 |
| 21 | |
| 22 | /* System Control and Event Registers */ |
| 23 | #define DA9211_REG_STATUS_A 0x50 |
| 24 | #define DA9211_REG_STATUS_B 0x51 |
| 25 | #define DA9211_REG_EVENT_A 0x52 |
| 26 | #define DA9211_REG_EVENT_B 0x53 |
| 27 | #define DA9211_REG_MASK_A 0x54 |
| 28 | #define DA9211_REG_MASK_B 0x55 |
| 29 | #define DA9211_REG_CONTROL_A 0x56 |
| 30 | |
| 31 | /* GPIO Control Registers */ |
| 32 | #define DA9211_REG_GPIO_0_1 0x58 |
| 33 | #define DA9211_REG_GPIO_2_3 0x59 |
| 34 | #define DA9211_REG_GPIO_4 0x5A |
| 35 | |
| 36 | /* Regulator Registers */ |
| 37 | #define DA9211_REG_BUCKA_CONT 0x5D |
| 38 | #define DA9211_REG_BUCKB_CONT 0x5E |
| 39 | #define DA9211_REG_BUCK_ILIM 0xD0 |
| 40 | #define DA9211_REG_BUCKA_CONF 0xD1 |
| 41 | #define DA9211_REG_BUCKB_CONF 0xD2 |
| 42 | #define DA9211_REG_BUCK_CONF 0xD3 |
| 43 | #define DA9211_REG_VBACKA_MAX 0xD5 |
| 44 | #define DA9211_REG_VBACKB_MAX 0xD6 |
| 45 | #define DA9211_REG_VBUCKA_A 0xD7 |
| 46 | #define DA9211_REG_VBUCKA_B 0xD8 |
| 47 | #define DA9211_REG_VBUCKB_A 0xD9 |
| 48 | #define DA9211_REG_VBUCKB_B 0xDA |
| 49 | |
| 50 | /* I2C Interface Settings */ |
| 51 | #define DA9211_REG_INTERFACE 0x105 |
| 52 | |
| 53 | /* BUCK Phase Selection*/ |
| 54 | #define DA9211_REG_CONFIG_E 0x147 |
| 55 | |
| James Ban | 005547e | 2014-08-08 14:27:04 +0900 | [diff] [blame] | 56 | /* Device ID */ |
| 57 | #define DA9211_REG_DEVICE_ID 0x201 |
| 58 | |
| James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 59 | /* |
| 60 | * Registers bits |
| 61 | */ |
| 62 | /* DA9211_REG_PAGE_CON (addr=0x00) */ |
| 63 | #define DA9211_REG_PAGE_SHIFT 1 |
| James Ban | 005547e | 2014-08-08 14:27:04 +0900 | [diff] [blame] | 64 | #define DA9211_REG_PAGE_MASK 0x06 |
| James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 65 | /* On I2C registers 0x00 - 0xFF */ |
| 66 | #define DA9211_REG_PAGE0 0 |
| 67 | /* On I2C registers 0x100 - 0x1FF */ |
| 68 | #define DA9211_REG_PAGE2 2 |
| 69 | #define DA9211_PAGE_WRITE_MODE 0x00 |
| 70 | #define DA9211_REPEAT_WRITE_MODE 0x40 |
| 71 | #define DA9211_PAGE_REVERT 0x80 |
| 72 | |
| 73 | /* DA9211_REG_STATUS_A (addr=0x50) */ |
| 74 | #define DA9211_GPI0 0x01 |
| 75 | #define DA9211_GPI1 0x02 |
| 76 | #define DA9211_GPI2 0x04 |
| 77 | #define DA9211_GPI3 0x08 |
| 78 | #define DA9211_GPI4 0x10 |
| 79 | |
| 80 | /* DA9211_REG_EVENT_A (addr=0x52) */ |
| 81 | #define DA9211_E_GPI0 0x01 |
| 82 | #define DA9211_E_GPI1 0x02 |
| 83 | #define DA9211_E_GPI2 0x04 |
| 84 | #define DA9211_E_GPI3 0x08 |
| 85 | #define DA9211_E_GPI4 0x10 |
| 86 | #define DA9211_E_UVLO_IO 0x40 |
| 87 | |
| 88 | /* DA9211_REG_EVENT_B (addr=0x53) */ |
| 89 | #define DA9211_E_PWRGOOD_A 0x01 |
| 90 | #define DA9211_E_PWRGOOD_B 0x02 |
| 91 | #define DA9211_E_TEMP_WARN 0x04 |
| 92 | #define DA9211_E_TEMP_CRIT 0x08 |
| 93 | #define DA9211_E_OV_CURR_A 0x10 |
| 94 | #define DA9211_E_OV_CURR_B 0x20 |
| 95 | |
| 96 | /* DA9211_REG_MASK_A (addr=0x54) */ |
| 97 | #define DA9211_M_GPI0 0x01 |
| 98 | #define DA9211_M_GPI1 0x02 |
| 99 | #define DA9211_M_GPI2 0x04 |
| 100 | #define DA9211_M_GPI3 0x08 |
| 101 | #define DA9211_M_GPI4 0x10 |
| 102 | #define DA9211_M_UVLO_IO 0x40 |
| 103 | |
| 104 | /* DA9211_REG_MASK_B (addr=0x55) */ |
| 105 | #define DA9211_M_PWRGOOD_A 0x01 |
| 106 | #define DA9211_M_PWRGOOD_B 0x02 |
| 107 | #define DA9211_M_TEMP_WARN 0x04 |
| 108 | #define DA9211_M_TEMP_CRIT 0x08 |
| 109 | #define DA9211_M_OV_CURR_A 0x10 |
| 110 | #define DA9211_M_OV_CURR_B 0x20 |
| 111 | |
| 112 | /* DA9211_REG_CONTROL_A (addr=0x56) */ |
| 113 | #define DA9211_DEBOUNCING_SHIFT 0 |
| 114 | #define DA9211_DEBOUNCING_MASK 0x07 |
| 115 | #define DA9211_SLEW_RATE_SHIFT 3 |
| 116 | #define DA9211_SLEW_RATE_A_MASK 0x18 |
| 117 | #define DA9211_SLEW_RATE_B_SHIFT 5 |
| 118 | #define DA9211_SLEW_RATE_B_MASK 0x60 |
| 119 | #define DA9211_V_LOCK 0x80 |
| 120 | |
| 121 | /* DA9211_REG_GPIO_0_1 (addr=0x58) */ |
| 122 | #define DA9211_GPIO0_PIN_SHIFT 0 |
| 123 | #define DA9211_GPIO0_PIN_MASK 0x03 |
| 124 | #define DA9211_GPIO0_PIN_GPI 0x00 |
| 125 | #define DA9211_GPIO0_PIN_GPO_OD 0x02 |
| 126 | #define DA9211_GPIO0_PIN_GPO 0x03 |
| 127 | #define DA9211_GPIO0_TYPE 0x04 |
| 128 | #define DA9211_GPIO0_TYPE_GPI 0x00 |
| 129 | #define DA9211_GPIO0_TYPE_GPO 0x04 |
| 130 | #define DA9211_GPIO0_MODE 0x08 |
| 131 | #define DA9211_GPIO1_PIN_SHIFT 4 |
| 132 | #define DA9211_GPIO1_PIN_MASK 0x30 |
| 133 | #define DA9211_GPIO1_PIN_GPI 0x00 |
| 134 | #define DA9211_GPIO1_PIN_VERROR 0x10 |
| 135 | #define DA9211_GPIO1_PIN_GPO_OD 0x20 |
| 136 | #define DA9211_GPIO1_PIN_GPO 0x30 |
| 137 | #define DA9211_GPIO1_TYPE_SHIFT 0x40 |
| 138 | #define DA9211_GPIO1_TYPE_GPI 0x00 |
| 139 | #define DA9211_GPIO1_TYPE_GPO 0x40 |
| 140 | #define DA9211_GPIO1_MODE 0x80 |
| 141 | |
| 142 | /* DA9211_REG_GPIO_2_3 (addr=0x59) */ |
| 143 | #define DA9211_GPIO2_PIN_SHIFT 0 |
| 144 | #define DA9211_GPIO2_PIN_MASK 0x03 |
| 145 | #define DA9211_GPIO2_PIN_GPI 0x00 |
| 146 | #define DA9211_GPIO5_PIN_BUCK_CLK 0x10 |
| 147 | #define DA9211_GPIO2_PIN_GPO_OD 0x02 |
| 148 | #define DA9211_GPIO2_PIN_GPO 0x03 |
| 149 | #define DA9211_GPIO2_TYPE 0x04 |
| 150 | #define DA9211_GPIO2_TYPE_GPI 0x00 |
| 151 | #define DA9211_GPIO2_TYPE_GPO 0x04 |
| 152 | #define DA9211_GPIO2_MODE 0x08 |
| 153 | #define DA9211_GPIO3_PIN_SHIFT 4 |
| 154 | #define DA9211_GPIO3_PIN_MASK 0x30 |
| 155 | #define DA9211_GPIO3_PIN_GPI 0x00 |
| 156 | #define DA9211_GPIO3_PIN_IERROR 0x10 |
| 157 | #define DA9211_GPIO3_PIN_GPO_OD 0x20 |
| 158 | #define DA9211_GPIO3_PIN_GPO 0x30 |
| 159 | #define DA9211_GPIO3_TYPE_SHIFT 0x40 |
| 160 | #define DA9211_GPIO3_TYPE_GPI 0x00 |
| 161 | #define DA9211_GPIO3_TYPE_GPO 0x40 |
| 162 | #define DA9211_GPIO3_MODE 0x80 |
| 163 | |
| 164 | /* DA9211_REG_GPIO_4 (addr=0x5A) */ |
| 165 | #define DA9211_GPIO4_PIN_SHIFT 0 |
| 166 | #define DA9211_GPIO4_PIN_MASK 0x03 |
| 167 | #define DA9211_GPIO4_PIN_GPI 0x00 |
| 168 | #define DA9211_GPIO4_PIN_GPO_OD 0x02 |
| 169 | #define DA9211_GPIO4_PIN_GPO 0x03 |
| 170 | #define DA9211_GPIO4_TYPE 0x04 |
| 171 | #define DA9211_GPIO4_TYPE_GPI 0x00 |
| 172 | #define DA9211_GPIO4_TYPE_GPO 0x04 |
| 173 | #define DA9211_GPIO4_MODE 0x08 |
| 174 | |
| 175 | /* DA9211_REG_BUCKA_CONT (addr=0x5D) */ |
| 176 | #define DA9211_BUCKA_EN 0x01 |
| 177 | #define DA9211_BUCKA_GPI_SHIFT 1 |
| 178 | #define DA9211_BUCKA_GPI_MASK 0x06 |
| 179 | #define DA9211_BUCKA_GPI_OFF 0x00 |
| 180 | #define DA9211_BUCKA_GPI_GPIO0 0x02 |
| 181 | #define DA9211_BUCKA_GPI_GPIO1 0x04 |
| 182 | #define DA9211_BUCKA_GPI_GPIO3 0x06 |
| 183 | #define DA9211_BUCKA_PD_DIS 0x08 |
| 184 | #define DA9211_VBUCKA_SEL 0x10 |
| 185 | #define DA9211_VBUCKA_SEL_A 0x00 |
| 186 | #define DA9211_VBUCKA_SEL_B 0x10 |
| 187 | #define DA9211_VBUCKA_GPI_SHIFT 5 |
| 188 | #define DA9211_VBUCKA_GPI_MASK 0x60 |
| 189 | #define DA9211_VBUCKA_GPI_OFF 0x00 |
| 190 | #define DA9211_VBUCKA_GPI_GPIO1 0x20 |
| 191 | #define DA9211_VBUCKA_GPI_GPIO2 0x40 |
| 192 | #define DA9211_VBUCKA_GPI_GPIO4 0x60 |
| 193 | |
| 194 | /* DA9211_REG_BUCKB_CONT (addr=0x5E) */ |
| 195 | #define DA9211_BUCKB_EN 0x01 |
| 196 | #define DA9211_BUCKB_GPI_SHIFT 1 |
| 197 | #define DA9211_BUCKB_GPI_MASK 0x06 |
| 198 | #define DA9211_BUCKB_GPI_OFF 0x00 |
| 199 | #define DA9211_BUCKB_GPI_GPIO0 0x02 |
| 200 | #define DA9211_BUCKB_GPI_GPIO1 0x04 |
| 201 | #define DA9211_BUCKB_GPI_GPIO3 0x06 |
| 202 | #define DA9211_BUCKB_PD_DIS 0x08 |
| 203 | #define DA9211_VBUCKB_SEL 0x10 |
| 204 | #define DA9211_VBUCKB_SEL_A 0x00 |
| 205 | #define DA9211_VBUCKB_SEL_B 0x10 |
| 206 | #define DA9211_VBUCKB_GPI_SHIFT 5 |
| 207 | #define DA9211_VBUCKB_GPI_MASK 0x60 |
| 208 | #define DA9211_VBUCKB_GPI_OFF 0x00 |
| 209 | #define DA9211_VBUCKB_GPI_GPIO1 0x20 |
| 210 | #define DA9211_VBUCKB_GPI_GPIO2 0x40 |
| 211 | #define DA9211_VBUCKB_GPI_GPIO4 0x60 |
| 212 | |
| 213 | /* DA9211_REG_BUCK_ILIM (addr=0xD0) */ |
| 214 | #define DA9211_BUCKA_ILIM_SHIFT 0 |
| 215 | #define DA9211_BUCKA_ILIM_MASK 0x0F |
| 216 | #define DA9211_BUCKB_ILIM_SHIFT 4 |
| 217 | #define DA9211_BUCKB_ILIM_MASK 0xF0 |
| 218 | |
| 219 | /* DA9211_REG_BUCKA_CONF (addr=0xD1) */ |
| 220 | #define DA9211_BUCKA_MODE_SHIFT 0 |
| 221 | #define DA9211_BUCKA_MODE_MASK 0x03 |
| 222 | #define DA9211_BUCKA_MODE_MANUAL 0x00 |
| 223 | #define DA9211_BUCKA_MODE_SLEEP 0x01 |
| 224 | #define DA9211_BUCKA_MODE_SYNC 0x02 |
| 225 | #define DA9211_BUCKA_MODE_AUTO 0x03 |
| 226 | #define DA9211_BUCKA_UP_CTRL_SHIFT 2 |
| 227 | #define DA9211_BUCKA_UP_CTRL_MASK 0x1C |
| 228 | #define DA9211_BUCKA_DOWN_CTRL_SHIFT 5 |
| 229 | #define DA9211_BUCKA_DOWN_CTRL_MASK 0xE0 |
| 230 | |
| 231 | /* DA9211_REG_BUCKB_CONF (addr=0xD2) */ |
| 232 | #define DA9211_BUCKB_MODE_SHIFT 0 |
| 233 | #define DA9211_BUCKB_MODE_MASK 0x03 |
| 234 | #define DA9211_BUCKB_MODE_MANUAL 0x00 |
| 235 | #define DA9211_BUCKB_MODE_SLEEP 0x01 |
| 236 | #define DA9211_BUCKB_MODE_SYNC 0x02 |
| 237 | #define DA9211_BUCKB_MODE_AUTO 0x03 |
| 238 | #define DA9211_BUCKB_UP_CTRL_SHIFT 2 |
| 239 | #define DA9211_BUCKB_UP_CTRL_MASK 0x1C |
| 240 | #define DA9211_BUCKB_DOWN_CTRL_SHIFT 5 |
| 241 | #define DA9211_BUCKB_DOWN_CTRL_MASK 0xE0 |
| 242 | |
| 243 | /* DA9211_REG_BUCK_CONF (addr=0xD3) */ |
| 244 | #define DA9211_PHASE_SEL_A_SHIFT 0 |
| 245 | #define DA9211_PHASE_SEL_A_MASK 0x03 |
| 246 | #define DA9211_PHASE_SEL_B_SHIFT 2 |
| 247 | #define DA9211_PHASE_SEL_B_MASK 0x04 |
| 248 | #define DA9211_PH_SH_EN_A_SHIFT 3 |
| 249 | #define DA9211_PH_SH_EN_A_MASK 0x08 |
| 250 | #define DA9211_PH_SH_EN_B_SHIFT 4 |
| 251 | #define DA9211_PH_SH_EN_B_MASK 0x10 |
| 252 | |
| 253 | /* DA9211_REG_VBUCKA_MAX (addr=0xD5) */ |
| 254 | #define DA9211_VBUCKA_BASE_SHIFT 0 |
| 255 | #define DA9211_VBUCKA_BASE_MASK 0x7F |
| 256 | |
| 257 | /* DA9211_REG_VBUCKB_MAX (addr=0xD6) */ |
| 258 | #define DA9211_VBUCKB_BASE_SHIFT 0 |
| 259 | #define DA9211_VBUCKB_BASE_MASK 0x7F |
| 260 | |
| 261 | /* DA9211_REG_VBUCKA/B_A/B (addr=0xD7/0xD8/0xD9/0xDA) */ |
| 262 | #define DA9211_VBUCK_SHIFT 0 |
| 263 | #define DA9211_VBUCK_MASK 0x7F |
| 264 | #define DA9211_VBUCK_BIAS 0 |
| 265 | #define DA9211_BUCK_SL 0x80 |
| 266 | |
| 267 | /* DA9211_REG_INTERFACE (addr=0x105) */ |
| 268 | #define DA9211_IF_BASE_ADDR_SHIFT 4 |
| 269 | #define DA9211_IF_BASE_ADDR_MASK 0xF0 |
| 270 | |
| 271 | /* DA9211_REG_CONFIG_E (addr=0x147) */ |
| 272 | #define DA9211_SLAVE_SEL 0x40 |
| 273 | |
| 274 | #endif /* __DA9211_REGISTERS_H__ */ |