Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 1 | /* |
| 2 | * ST spear1340-miphy driver |
| 3 | * |
| 4 | * Copyright (C) 2014 ST Microelectronics |
Pratyush Anand | e34cadd | 2015-06-25 15:01:08 -0700 | [diff] [blame] | 5 | * Pratyush Anand <pratyush.anand@gmail.com> |
Pratyush Anand | 9c5dcdd | 2015-06-25 15:01:11 -0700 | [diff] [blame] | 6 | * Mohit Kumar <mohit.kumar.dhaka@gmail.com> |
Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | * |
| 12 | */ |
| 13 | |
| 14 | #include <linux/bitops.h> |
| 15 | #include <linux/delay.h> |
| 16 | #include <linux/dma-mapping.h> |
| 17 | #include <linux/kernel.h> |
| 18 | #include <linux/mfd/syscon.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/of_device.h> |
| 21 | #include <linux/phy/phy.h> |
| 22 | #include <linux/regmap.h> |
| 23 | |
| 24 | /* SPEAr1340 Registers */ |
| 25 | /* Power Management Registers */ |
| 26 | #define SPEAR1340_PCM_CFG 0x100 |
| 27 | #define SPEAR1340_PCM_CFG_SATA_POWER_EN BIT(11) |
| 28 | #define SPEAR1340_PCM_WKUP_CFG 0x104 |
| 29 | #define SPEAR1340_SWITCH_CTR 0x108 |
| 30 | |
| 31 | #define SPEAR1340_PERIP1_SW_RST 0x318 |
| 32 | #define SPEAR1340_PERIP1_SW_RSATA BIT(12) |
| 33 | #define SPEAR1340_PERIP2_SW_RST 0x31C |
| 34 | #define SPEAR1340_PERIP3_SW_RST 0x320 |
| 35 | |
| 36 | /* PCIE - SATA configuration registers */ |
| 37 | #define SPEAR1340_PCIE_SATA_CFG 0x424 |
| 38 | /* PCIE CFG MASks */ |
| 39 | #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT BIT(11) |
| 40 | #define SPEAR1340_PCIE_CFG_POWERUP_RESET BIT(10) |
| 41 | #define SPEAR1340_PCIE_CFG_CORE_CLK_EN BIT(9) |
| 42 | #define SPEAR1340_PCIE_CFG_AUX_CLK_EN BIT(8) |
| 43 | #define SPEAR1340_SATA_CFG_TX_CLK_EN BIT(4) |
| 44 | #define SPEAR1340_SATA_CFG_RX_CLK_EN BIT(3) |
| 45 | #define SPEAR1340_SATA_CFG_POWERUP_RESET BIT(2) |
| 46 | #define SPEAR1340_SATA_CFG_PM_CLK_EN BIT(1) |
| 47 | #define SPEAR1340_PCIE_SATA_SEL_PCIE (0) |
| 48 | #define SPEAR1340_PCIE_SATA_SEL_SATA (1) |
| 49 | #define SPEAR1340_PCIE_SATA_CFG_MASK 0xF1F |
| 50 | #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \ |
| 51 | SPEAR1340_PCIE_CFG_AUX_CLK_EN | \ |
| 52 | SPEAR1340_PCIE_CFG_CORE_CLK_EN | \ |
| 53 | SPEAR1340_PCIE_CFG_POWERUP_RESET | \ |
| 54 | SPEAR1340_PCIE_CFG_DEVICE_PRESENT) |
| 55 | #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \ |
| 56 | SPEAR1340_SATA_CFG_PM_CLK_EN | \ |
| 57 | SPEAR1340_SATA_CFG_POWERUP_RESET | \ |
| 58 | SPEAR1340_SATA_CFG_RX_CLK_EN | \ |
| 59 | SPEAR1340_SATA_CFG_TX_CLK_EN) |
| 60 | |
| 61 | #define SPEAR1340_PCIE_MIPHY_CFG 0x428 |
| 62 | #define SPEAR1340_MIPHY_OSC_BYPASS_EXT BIT(31) |
| 63 | #define SPEAR1340_MIPHY_CLK_REF_DIV2 BIT(27) |
| 64 | #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27) |
| 65 | #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27) |
| 66 | #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0) |
| 67 | #define SPEAR1340_PCIE_MIPHY_CFG_MASK 0xF80000FF |
| 68 | #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \ |
| 69 | (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ |
| 70 | SPEAR1340_MIPHY_CLK_REF_DIV2 | \ |
| 71 | SPEAR1340_MIPHY_PLL_RATIO_TOP(60)) |
| 72 | #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ |
| 73 | (SPEAR1340_MIPHY_PLL_RATIO_TOP(120)) |
| 74 | #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \ |
| 75 | (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ |
| 76 | SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) |
| 77 | |
| 78 | enum spear1340_miphy_mode { |
| 79 | SATA, |
| 80 | PCIE, |
| 81 | }; |
| 82 | |
| 83 | struct spear1340_miphy_priv { |
| 84 | /* phy mode: 0 for SATA 1 for PCIe */ |
| 85 | enum spear1340_miphy_mode mode; |
| 86 | /* regmap for any soc specific misc registers */ |
| 87 | struct regmap *misc; |
| 88 | /* phy struct pointer */ |
| 89 | struct phy *phy; |
| 90 | }; |
| 91 | |
| 92 | static int spear1340_miphy_sata_init(struct spear1340_miphy_priv *priv) |
| 93 | { |
| 94 | regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, |
| 95 | SPEAR1340_PCIE_SATA_CFG_MASK, |
| 96 | SPEAR1340_SATA_CFG_VAL); |
| 97 | regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, |
| 98 | SPEAR1340_PCIE_MIPHY_CFG_MASK, |
| 99 | SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK); |
| 100 | /* Switch on sata power domain */ |
| 101 | regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG, |
| 102 | SPEAR1340_PCM_CFG_SATA_POWER_EN, |
| 103 | SPEAR1340_PCM_CFG_SATA_POWER_EN); |
| 104 | /* Wait for SATA power domain on */ |
| 105 | msleep(20); |
| 106 | |
| 107 | /* Disable PCIE SATA Controller reset */ |
| 108 | regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST, |
| 109 | SPEAR1340_PERIP1_SW_RSATA, 0); |
| 110 | /* Wait for SATA reset de-assert completion */ |
| 111 | msleep(20); |
| 112 | |
| 113 | return 0; |
| 114 | } |
| 115 | |
| 116 | static int spear1340_miphy_sata_exit(struct spear1340_miphy_priv *priv) |
| 117 | { |
| 118 | regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, |
| 119 | SPEAR1340_PCIE_SATA_CFG_MASK, 0); |
| 120 | regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, |
| 121 | SPEAR1340_PCIE_MIPHY_CFG_MASK, 0); |
| 122 | |
| 123 | /* Enable PCIE SATA Controller reset */ |
| 124 | regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST, |
| 125 | SPEAR1340_PERIP1_SW_RSATA, |
| 126 | SPEAR1340_PERIP1_SW_RSATA); |
| 127 | /* Wait for SATA power domain off */ |
| 128 | msleep(20); |
| 129 | /* Switch off sata power domain */ |
| 130 | regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG, |
| 131 | SPEAR1340_PCM_CFG_SATA_POWER_EN, 0); |
| 132 | /* Wait for SATA reset assert completion */ |
| 133 | msleep(20); |
| 134 | |
| 135 | return 0; |
| 136 | } |
| 137 | |
| 138 | static int spear1340_miphy_pcie_init(struct spear1340_miphy_priv *priv) |
| 139 | { |
| 140 | regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, |
| 141 | SPEAR1340_PCIE_MIPHY_CFG_MASK, |
| 142 | SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE); |
| 143 | regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, |
| 144 | SPEAR1340_PCIE_SATA_CFG_MASK, |
| 145 | SPEAR1340_PCIE_CFG_VAL); |
| 146 | |
| 147 | return 0; |
| 148 | } |
| 149 | |
| 150 | static int spear1340_miphy_pcie_exit(struct spear1340_miphy_priv *priv) |
| 151 | { |
| 152 | regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, |
| 153 | SPEAR1340_PCIE_MIPHY_CFG_MASK, 0); |
| 154 | regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, |
| 155 | SPEAR1340_PCIE_SATA_CFG_MASK, 0); |
| 156 | |
| 157 | return 0; |
| 158 | } |
| 159 | |
| 160 | static int spear1340_miphy_init(struct phy *phy) |
| 161 | { |
| 162 | struct spear1340_miphy_priv *priv = phy_get_drvdata(phy); |
| 163 | int ret = 0; |
| 164 | |
| 165 | if (priv->mode == SATA) |
| 166 | ret = spear1340_miphy_sata_init(priv); |
| 167 | else if (priv->mode == PCIE) |
| 168 | ret = spear1340_miphy_pcie_init(priv); |
| 169 | |
| 170 | return ret; |
| 171 | } |
| 172 | |
| 173 | static int spear1340_miphy_exit(struct phy *phy) |
| 174 | { |
| 175 | struct spear1340_miphy_priv *priv = phy_get_drvdata(phy); |
| 176 | int ret = 0; |
| 177 | |
| 178 | if (priv->mode == SATA) |
| 179 | ret = spear1340_miphy_sata_exit(priv); |
| 180 | else if (priv->mode == PCIE) |
| 181 | ret = spear1340_miphy_pcie_exit(priv); |
| 182 | |
| 183 | return ret; |
| 184 | } |
| 185 | |
| 186 | static const struct of_device_id spear1340_miphy_of_match[] = { |
| 187 | { .compatible = "st,spear1340-miphy" }, |
| 188 | { }, |
| 189 | }; |
| 190 | MODULE_DEVICE_TABLE(of, spear1340_miphy_of_match); |
| 191 | |
Axel Lin | 4a9e5ca | 2015-07-15 15:33:51 +0800 | [diff] [blame^] | 192 | static const struct phy_ops spear1340_miphy_ops = { |
Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 193 | .init = spear1340_miphy_init, |
| 194 | .exit = spear1340_miphy_exit, |
| 195 | .owner = THIS_MODULE, |
| 196 | }; |
| 197 | |
| 198 | #ifdef CONFIG_PM_SLEEP |
| 199 | static int spear1340_miphy_suspend(struct device *dev) |
| 200 | { |
| 201 | struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); |
| 202 | int ret = 0; |
| 203 | |
| 204 | if (priv->mode == SATA) |
| 205 | ret = spear1340_miphy_sata_exit(priv); |
| 206 | |
| 207 | return ret; |
| 208 | } |
| 209 | |
| 210 | static int spear1340_miphy_resume(struct device *dev) |
| 211 | { |
| 212 | struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); |
| 213 | int ret = 0; |
| 214 | |
| 215 | if (priv->mode == SATA) |
| 216 | ret = spear1340_miphy_sata_init(priv); |
| 217 | |
| 218 | return ret; |
| 219 | } |
| 220 | #endif |
| 221 | |
| 222 | static SIMPLE_DEV_PM_OPS(spear1340_miphy_pm_ops, spear1340_miphy_suspend, |
| 223 | spear1340_miphy_resume); |
| 224 | |
| 225 | static struct phy *spear1340_miphy_xlate(struct device *dev, |
| 226 | struct of_phandle_args *args) |
| 227 | { |
| 228 | struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); |
| 229 | |
| 230 | if (args->args_count < 1) { |
| 231 | dev_err(dev, "DT did not pass correct no of args\n"); |
Axel Lin | 407ed83 | 2015-04-01 08:45:33 +0800 | [diff] [blame] | 232 | return ERR_PTR(-ENODEV); |
Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 233 | } |
| 234 | |
| 235 | priv->mode = args->args[0]; |
| 236 | |
| 237 | if (priv->mode != SATA && priv->mode != PCIE) { |
| 238 | dev_err(dev, "DT did not pass correct phy mode\n"); |
Axel Lin | 407ed83 | 2015-04-01 08:45:33 +0800 | [diff] [blame] | 239 | return ERR_PTR(-ENODEV); |
Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 240 | } |
| 241 | |
| 242 | return priv->phy; |
| 243 | } |
| 244 | |
| 245 | static int spear1340_miphy_probe(struct platform_device *pdev) |
| 246 | { |
| 247 | struct device *dev = &pdev->dev; |
| 248 | struct spear1340_miphy_priv *priv; |
| 249 | struct phy_provider *phy_provider; |
| 250 | |
| 251 | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
Peter Griffin | 556bdeb | 2014-08-15 13:40:13 +0100 | [diff] [blame] | 252 | if (!priv) |
Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 253 | return -ENOMEM; |
Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 254 | |
| 255 | priv->misc = |
| 256 | syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); |
| 257 | if (IS_ERR(priv->misc)) { |
| 258 | dev_err(dev, "failed to find misc regmap\n"); |
| 259 | return PTR_ERR(priv->misc); |
| 260 | } |
| 261 | |
Heikki Krogerus | dbc9863 | 2014-11-19 17:28:21 +0200 | [diff] [blame] | 262 | priv->phy = devm_phy_create(dev, NULL, &spear1340_miphy_ops); |
Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 263 | if (IS_ERR(priv->phy)) { |
| 264 | dev_err(dev, "failed to create SATA PCIe PHY\n"); |
| 265 | return PTR_ERR(priv->phy); |
| 266 | } |
| 267 | |
| 268 | dev_set_drvdata(dev, priv); |
| 269 | phy_set_drvdata(priv->phy, priv); |
| 270 | |
| 271 | phy_provider = |
| 272 | devm_of_phy_provider_register(dev, spear1340_miphy_xlate); |
| 273 | if (IS_ERR(phy_provider)) { |
| 274 | dev_err(dev, "failed to register phy provider\n"); |
| 275 | return PTR_ERR(phy_provider); |
| 276 | } |
| 277 | |
| 278 | return 0; |
| 279 | } |
| 280 | |
| 281 | static struct platform_driver spear1340_miphy_driver = { |
| 282 | .probe = spear1340_miphy_probe, |
| 283 | .driver = { |
| 284 | .name = "spear1340-miphy", |
Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 285 | .pm = &spear1340_miphy_pm_ops, |
| 286 | .of_match_table = of_match_ptr(spear1340_miphy_of_match), |
| 287 | }, |
| 288 | }; |
| 289 | |
Peter Griffin | 25451e5 | 2014-08-15 13:40:16 +0100 | [diff] [blame] | 290 | module_platform_driver(spear1340_miphy_driver); |
Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 291 | |
| 292 | MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver"); |
Pratyush Anand | e34cadd | 2015-06-25 15:01:08 -0700 | [diff] [blame] | 293 | MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>"); |
Pratyush Anand | 64562e9 | 2014-04-14 15:27:36 +0530 | [diff] [blame] | 294 | MODULE_LICENSE("GPL v2"); |