Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 4b915a73663fe0951077ebcdaf02337ff2bddcfc / . / drivers / message / fusion / lsi / mpi_log_sas.h
blob: 9259d1ad6e6e579b47ac61908abfd99c8caa6c09 [file] [log] [blame]
Moore, Eric4b915a72006-01-13 16:25:23 -0700[diff] [blame^]1
2/***************************************************************************
3 * *
4 * Copyright 2003 LSI Logic Corporation. All rights reserved. *
5 * *
6 * This file is confidential and a trade secret of LSI Logic. The *
7 * receipt of or possession of this file does not convey any rights to *
8 * reproduce or disclose its contents or to manufacture, use, or sell *
9 * anything it may describe, in whole, or in part, without the specific *
10 * written consent of LSI Logic Corporation. *
11 * *
12 ***************************************************************************
13 *
14 * Name: iopiIocLogInfo.h
15 * Title: SAS Firmware IOP Interface IOC Log Info Definitions
16 * Programmer: Guy Kendall
17 * Creation Date: September 24, 2003
18 *
19 * Version History
20 * ---------------
21 *
22 * Last Updated
23 * -------------
24 * Version %version: 22 %
25 * Date Updated %date_modified: %
26 * Programmer %created_by: nperucca %
27 *
28 * Date Who Description
29 * -------- --- -------------------------------------------------------
30 * 09/24/03 GWK Initial version
31 *
32 *
33 * Description
34 * ------------
35 * This include file contains SAS firmware interface IOC Log Info codes
36 *
37 *-------------------------------------------------------------------------
38 */
39
40#ifndef IOPI_IOCLOGINFO_H_INCLUDED
41#define IOPI_IOCLOGINFO_H_INCLUDED
42
43
44/****************************************************************************/
45/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */
46/* Format: */
47/* Bits 31-28: MPI_IOCLOGINFO_TYPE_SAS (3) */
48/* Bits 27-24: IOC_LOGINFO_ORIGINATOR: 0=IOP, 1=PL, 2=IR */
49/* Bits 23-16: LOGINFO_CODE */
50/* Bits 15-0: LOGINFO_CODE Specific */
51/****************************************************************************/
52
53/****************************************************************************/
54/* IOC_LOGINFO_ORIGINATOR defines */
55/****************************************************************************/
56#define IOC_LOGINFO_ORIGINATOR_IOP (0x00000000)
57#define IOC_LOGINFO_ORIGINATOR_PL (0x01000000)
58#define IOC_LOGINFO_ORIGINATOR_IR (0x02000000)
59
60/****************************************************************************/
61/* LOGINFO_CODE defines */
62/****************************************************************************/
63#define IOC_LOGINFO_CODE_MASK (0x00FF0000)
64#define IOC_LOGINFO_CODE_SHIFT (16)
65
66/****************************************************************************/
67/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP */
68/****************************************************************************/
69#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000)
70#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000)
71#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000)
72#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */
73#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */
74#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */
75#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */
76#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */
77#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */
78#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
79#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
80
81
82/****************************************************************************/
83/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */
84/****************************************************************************/
85#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000)
86#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000)
87#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000)
88#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000)
89#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000)
90#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000)
91#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000)
92#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000)
93#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000)
94#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000)
95#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000)
96#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000)
97#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000)
98#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000)
99#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000)
100#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */
101#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */
102#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */
103#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */
104#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */
105#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */
106#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */
107#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000)
108#define PL_LOGINFO_CODE_RESET (0x00110000)
109#define PL_LOGINFO_CODE_ABORT (0x00120000)
110#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000)
111#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
112#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
113#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
114#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
115#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)
116#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
117#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
118#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700)
119#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800)
120#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900)
121#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00)
122#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00)
123#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00)
124#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00)
125#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00)
126#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
127
128
129#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
130#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200001) /* Error occured on SMP Read */
131#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200002) /* Error occured on SMP Write */
132#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200004) /* Encl Mgmt services not available for this WWID */
133#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200005) /* Address Mode not suppored */
134#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200006) /* Invalid Slot Number in SEP Msg */
135#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200007) /* SGPIO not present/enabled */
136
137#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */
138#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */
139#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */
140#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
141#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200104) /* SEP stopped or sent bad chksum in Hdr */
142#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200105) /* SEP returned unknown scsi status */
143#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200106) /* SEP returned unknown scsi status */
144#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x00200107) /* SEP returned bad chksum after STOP */
145#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/
146
147
148/****************************************************************************/
149/* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */
150/****************************************************************************/
151#define IR_LOGINFO_CODE_UNUSED1 (0x00010000)
152#define IR_LOGINFO_CODE_UNUSED2 (0x00020000)
153
154/****************************************************************************/
155/* Defines for convienence */
156/****************************************************************************/
157#define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP)
158#define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL)
159#define IOC_LOGINFO_PREFIX_IR ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IR)
160
161#endif /* end of file */
162