Inaky Perez-Gonzalez | d09318b | 2008-09-17 16:34:30 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Host Wire Adapter: |
| 3 | * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC |
| 4 | * |
| 5 | * Copyright (C) 2005-2006 Intel Corporation |
| 6 | * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License version |
| 10 | * 2 as published by the Free Software Foundation. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| 20 | * 02110-1301, USA. |
| 21 | * |
| 22 | * |
| 23 | * The HWA driver is a simple layer that forwards requests to the WAHC |
| 24 | * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host |
| 25 | * Controller) layers. |
| 26 | * |
| 27 | * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB |
| 28 | * Host Controller that is connected to your system via USB (a USB |
| 29 | * dongle that implements a USB host...). There is also a Device Wired |
| 30 | * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for |
| 31 | * transferring data (it is after all a USB host connected via |
| 32 | * Wireless USB), we have a common layer called Wire Adapter Host |
| 33 | * Controller that does all the hard work. The WUSBHC (Wireless USB |
| 34 | * Host Controller) is the part common to WUSB Host Controllers, the |
| 35 | * HWA and the PCI-based one, that is implemented following the WHCI |
| 36 | * spec. All these layers are implemented in ../wusbcore. |
| 37 | * |
| 38 | * The main functions are hwahc_op_urb_{en,de}queue(), that pass the |
| 39 | * job of converting a URB to a Wire Adapter |
| 40 | * |
| 41 | * Entry points: |
| 42 | * |
| 43 | * hwahc_driver_*() Driver initialization, registration and |
| 44 | * teardown. |
| 45 | * |
| 46 | * hwahc_probe() New device came up, create an instance for |
| 47 | * it [from device enumeration]. |
| 48 | * |
| 49 | * hwahc_disconnect() Remove device instance [from device |
| 50 | * enumeration]. |
| 51 | * |
| 52 | * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for |
| 53 | * starting/stopping/etc (some might be made also |
| 54 | * DWA). |
| 55 | */ |
| 56 | #include <linux/kernel.h> |
| 57 | #include <linux/version.h> |
| 58 | #include <linux/init.h> |
| 59 | #include <linux/module.h> |
| 60 | #include <linux/workqueue.h> |
| 61 | #include <linux/wait.h> |
| 62 | #include <linux/completion.h> |
| 63 | #include "../wusbcore/wa-hc.h" |
| 64 | #include "../wusbcore/wusbhc.h" |
| 65 | |
| 66 | #define D_LOCAL 0 |
| 67 | #include <linux/uwb/debug.h> |
| 68 | |
| 69 | struct hwahc { |
| 70 | struct wusbhc wusbhc; /* has to be 1st */ |
| 71 | struct wahc wa; |
| 72 | u8 buffer[16]; /* for misc usb transactions */ |
| 73 | }; |
| 74 | |
| 75 | /** |
| 76 | * FIXME should be wusbhc |
| 77 | * |
| 78 | * NOTE: we need to cache the Cluster ID because later...there is no |
| 79 | * way to get it :) |
| 80 | */ |
| 81 | static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id) |
| 82 | { |
| 83 | int result; |
| 84 | struct wusbhc *wusbhc = &hwahc->wusbhc; |
| 85 | struct wahc *wa = &hwahc->wa; |
| 86 | struct device *dev = &wa->usb_iface->dev; |
| 87 | |
| 88 | result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| 89 | WUSB_REQ_SET_CLUSTER_ID, |
| 90 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 91 | cluster_id, |
| 92 | wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, |
| 93 | NULL, 0, 1000 /* FIXME: arbitrary */); |
| 94 | if (result < 0) |
| 95 | dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n", |
| 96 | cluster_id, result); |
| 97 | else |
| 98 | wusbhc->cluster_id = cluster_id; |
| 99 | dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id); |
| 100 | return result; |
| 101 | } |
| 102 | |
| 103 | static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) |
| 104 | { |
| 105 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 106 | struct wahc *wa = &hwahc->wa; |
| 107 | |
| 108 | return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| 109 | WUSB_REQ_SET_NUM_DNTS, |
| 110 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 111 | interval << 8 | slots, |
| 112 | wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, |
| 113 | NULL, 0, 1000 /* FIXME: arbitrary */); |
| 114 | } |
| 115 | |
| 116 | /* |
| 117 | * Reset a WUSB host controller and wait for it to complete doing it. |
| 118 | * |
| 119 | * @usb_hcd: Pointer to WUSB Host Controller instance. |
| 120 | * |
| 121 | */ |
| 122 | static int hwahc_op_reset(struct usb_hcd *usb_hcd) |
| 123 | { |
| 124 | int result; |
| 125 | struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 126 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 127 | struct device *dev = &hwahc->wa.usb_iface->dev; |
| 128 | |
| 129 | d_fnstart(4, dev, "(hwahc %p)\n", hwahc); |
| 130 | mutex_lock(&wusbhc->mutex); |
| 131 | wa_nep_disarm(&hwahc->wa); |
| 132 | result = __wa_set_feature(&hwahc->wa, WA_RESET); |
| 133 | if (result < 0) { |
| 134 | dev_err(dev, "error commanding HC to reset: %d\n", result); |
| 135 | goto error_unlock; |
| 136 | } |
| 137 | d_printf(3, dev, "reset: waiting for device to change state\n"); |
| 138 | result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0); |
| 139 | if (result < 0) { |
| 140 | dev_err(dev, "error waiting for HC to reset: %d\n", result); |
| 141 | goto error_unlock; |
| 142 | } |
| 143 | error_unlock: |
| 144 | mutex_unlock(&wusbhc->mutex); |
| 145 | d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); |
| 146 | return result; |
| 147 | } |
| 148 | |
| 149 | /* |
| 150 | * FIXME: break this function up |
| 151 | */ |
| 152 | static int hwahc_op_start(struct usb_hcd *usb_hcd) |
| 153 | { |
| 154 | u8 addr; |
| 155 | int result; |
| 156 | struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 157 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 158 | struct device *dev = &hwahc->wa.usb_iface->dev; |
| 159 | |
| 160 | /* Set up a Host Info WUSB Information Element */ |
| 161 | d_fnstart(4, dev, "(hwahc %p)\n", hwahc); |
| 162 | result = -ENOSPC; |
| 163 | mutex_lock(&wusbhc->mutex); |
| 164 | /* Start the numbering from the top so that the bottom |
| 165 | * range of the unauth addr space is used for devices, |
| 166 | * the top for HCs; use 0xfe - RC# */ |
| 167 | addr = wusb_cluster_id_get(); |
| 168 | if (addr == 0) |
| 169 | goto error_cluster_id_get; |
| 170 | result = __hwahc_set_cluster_id(hwahc, addr); |
| 171 | if (result < 0) |
| 172 | goto error_set_cluster_id; |
| 173 | |
Inaky Perez-Gonzalez | d09318b | 2008-09-17 16:34:30 +0100 | [diff] [blame] | 174 | usb_hcd->uses_new_polling = 1; |
| 175 | usb_hcd->poll_rh = 1; |
| 176 | usb_hcd->state = HC_STATE_RUNNING; |
| 177 | result = 0; |
| 178 | out: |
| 179 | mutex_unlock(&wusbhc->mutex); |
| 180 | d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); |
| 181 | return result; |
| 182 | |
Inaky Perez-Gonzalez | d09318b | 2008-09-17 16:34:30 +0100 | [diff] [blame] | 183 | error_set_cluster_id: |
| 184 | wusb_cluster_id_put(wusbhc->cluster_id); |
| 185 | error_cluster_id_get: |
| 186 | goto out; |
| 187 | |
| 188 | } |
| 189 | |
Inaky Perez-Gonzalez | d09318b | 2008-09-17 16:34:30 +0100 | [diff] [blame] | 190 | static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg) |
| 191 | { |
| 192 | struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 193 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 194 | dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__, |
| 195 | usb_hcd, hwahc, *(unsigned long *) &msg); |
| 196 | return -ENOSYS; |
| 197 | } |
| 198 | |
| 199 | static int hwahc_op_resume(struct usb_hcd *usb_hcd) |
| 200 | { |
| 201 | struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 202 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 203 | |
| 204 | dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, |
| 205 | usb_hcd, hwahc); |
| 206 | return -ENOSYS; |
| 207 | } |
| 208 | |
Inaky Perez-Gonzalez | d09318b | 2008-09-17 16:34:30 +0100 | [diff] [blame] | 209 | /* |
| 210 | * No need to abort pipes, as when this is called, all the children |
| 211 | * has been disconnected and that has done it [through |
| 212 | * usb_disable_interface() -> usb_disable_endpoint() -> |
| 213 | * hwahc_op_ep_disable() - >rpipe_ep_disable()]. |
| 214 | */ |
| 215 | static void hwahc_op_stop(struct usb_hcd *usb_hcd) |
| 216 | { |
| 217 | int result; |
| 218 | struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 219 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 220 | struct wahc *wa = &hwahc->wa; |
| 221 | struct device *dev = &wa->usb_iface->dev; |
| 222 | |
| 223 | d_fnstart(4, dev, "(hwahc %p)\n", hwahc); |
| 224 | mutex_lock(&wusbhc->mutex); |
| 225 | wusbhc_stop(wusbhc); |
Inaky Perez-Gonzalez | d09318b | 2008-09-17 16:34:30 +0100 | [diff] [blame] | 226 | wusb_cluster_id_put(wusbhc->cluster_id); |
| 227 | mutex_unlock(&wusbhc->mutex); |
| 228 | d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); |
| 229 | return; |
| 230 | } |
| 231 | |
| 232 | static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd) |
| 233 | { |
| 234 | struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 235 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 236 | |
| 237 | dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, |
| 238 | usb_hcd, hwahc); |
| 239 | return -ENOSYS; |
| 240 | } |
| 241 | |
| 242 | static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, |
| 243 | gfp_t gfp) |
| 244 | { |
| 245 | struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 246 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 247 | |
| 248 | return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp); |
| 249 | } |
| 250 | |
| 251 | static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, |
| 252 | int status) |
| 253 | { |
| 254 | struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 255 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 256 | |
| 257 | return wa_urb_dequeue(&hwahc->wa, urb); |
| 258 | } |
| 259 | |
| 260 | /* |
| 261 | * Release resources allocated for an endpoint |
| 262 | * |
| 263 | * If there is an associated rpipe to this endpoint, go ahead and put it. |
| 264 | */ |
| 265 | static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd, |
| 266 | struct usb_host_endpoint *ep) |
| 267 | { |
| 268 | struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 269 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 270 | |
| 271 | rpipe_ep_disable(&hwahc->wa, ep); |
| 272 | } |
| 273 | |
David Vrabel | 4d2bea4 | 2008-10-27 15:42:31 +0000 | [diff] [blame^] | 274 | static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) |
| 275 | { |
| 276 | int result; |
| 277 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 278 | struct device *dev = &hwahc->wa.usb_iface->dev; |
| 279 | |
| 280 | result = __wa_set_feature(&hwahc->wa, WA_ENABLE); |
| 281 | if (result < 0) { |
| 282 | dev_err(dev, "error commanding HC to start: %d\n", result); |
| 283 | goto error_stop; |
| 284 | } |
| 285 | result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE); |
| 286 | if (result < 0) { |
| 287 | dev_err(dev, "error waiting for HC to start: %d\n", result); |
| 288 | goto error_stop; |
| 289 | } |
| 290 | result = wa_nep_arm(&hwahc->wa, GFP_KERNEL); |
| 291 | if (result < 0) { |
| 292 | dev_err(dev, "cannot listen to notifications: %d\n", result); |
| 293 | goto error_stop; |
| 294 | } |
| 295 | return result; |
| 296 | |
| 297 | error_stop: |
| 298 | __wa_clear_feature(&hwahc->wa, WA_ENABLE); |
| 299 | return result; |
| 300 | } |
| 301 | |
| 302 | static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc, int delay) |
| 303 | { |
| 304 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 305 | struct wahc *wa = &hwahc->wa; |
| 306 | u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| 307 | int ret; |
| 308 | |
| 309 | ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| 310 | WUSB_REQ_CHAN_STOP, |
| 311 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 312 | delay * 1000, |
| 313 | iface_no, |
| 314 | NULL, 0, 1000 /* FIXME: arbitrary */); |
| 315 | if (ret == 0) |
| 316 | msleep(delay); |
| 317 | |
| 318 | wa_nep_disarm(&hwahc->wa); |
| 319 | __wa_stop(&hwahc->wa); |
| 320 | } |
| 321 | |
Inaky Perez-Gonzalez | d09318b | 2008-09-17 16:34:30 +0100 | [diff] [blame] | 322 | /* |
| 323 | * Set the UWB MAS allocation for the WUSB cluster |
| 324 | * |
| 325 | * @stream_index: stream to use (-1 for cancelling the allocation) |
| 326 | * @mas: mas bitmap to use |
| 327 | */ |
| 328 | static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index, |
| 329 | const struct uwb_mas_bm *mas) |
| 330 | { |
| 331 | int result; |
| 332 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 333 | struct wahc *wa = &hwahc->wa; |
| 334 | struct device *dev = &wa->usb_iface->dev; |
| 335 | u8 mas_le[UWB_NUM_MAS/8]; |
| 336 | |
| 337 | /* Set the stream index */ |
| 338 | result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| 339 | WUSB_REQ_SET_STREAM_IDX, |
| 340 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 341 | stream_index, |
| 342 | wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, |
| 343 | NULL, 0, 1000 /* FIXME: arbitrary */); |
| 344 | if (result < 0) { |
| 345 | dev_err(dev, "Cannot set WUSB stream index: %d\n", result); |
| 346 | goto out; |
| 347 | } |
| 348 | uwb_mas_bm_copy_le(mas_le, mas); |
| 349 | /* Set the MAS allocation */ |
| 350 | result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| 351 | WUSB_REQ_SET_WUSB_MAS, |
| 352 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 353 | 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, |
| 354 | mas_le, 32, 1000 /* FIXME: arbitrary */); |
| 355 | if (result < 0) |
| 356 | dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result); |
| 357 | out: |
| 358 | return result; |
| 359 | } |
| 360 | |
| 361 | /* |
| 362 | * Add an IE to the host's MMC |
| 363 | * |
| 364 | * @interval: See WUSB1.0[8.5.3.1] |
| 365 | * @repeat_cnt: See WUSB1.0[8.5.3.1] |
| 366 | * @handle: See WUSB1.0[8.5.3.1] |
| 367 | * @wuie: Pointer to the header of the WUSB IE data to add. |
| 368 | * MUST BE allocated in a kmalloc buffer (no stack or |
| 369 | * vmalloc). |
| 370 | * |
| 371 | * NOTE: the format of the WUSB IEs for MMCs are different to the |
| 372 | * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length + |
| 373 | * Id in WUSB IEs). Standards...you gotta love'em. |
| 374 | */ |
| 375 | static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval, |
| 376 | u8 repeat_cnt, u8 handle, |
| 377 | struct wuie_hdr *wuie) |
| 378 | { |
| 379 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 380 | struct wahc *wa = &hwahc->wa; |
| 381 | u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| 382 | |
| 383 | return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| 384 | WUSB_REQ_ADD_MMC_IE, |
| 385 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 386 | interval << 8 | repeat_cnt, |
| 387 | handle << 8 | iface_no, |
| 388 | wuie, wuie->bLength, 1000 /* FIXME: arbitrary */); |
| 389 | } |
| 390 | |
| 391 | /* |
| 392 | * Remove an IE to the host's MMC |
| 393 | * |
| 394 | * @handle: See WUSB1.0[8.5.3.1] |
| 395 | */ |
| 396 | static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle) |
| 397 | { |
| 398 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 399 | struct wahc *wa = &hwahc->wa; |
| 400 | u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| 401 | return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| 402 | WUSB_REQ_REMOVE_MMC_IE, |
| 403 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 404 | 0, handle << 8 | iface_no, |
| 405 | NULL, 0, 1000 /* FIXME: arbitrary */); |
| 406 | } |
| 407 | |
| 408 | /* |
| 409 | * Update device information for a given fake port |
| 410 | * |
| 411 | * @port_idx: Fake port to which device is connected (wusbhc index, not |
| 412 | * USB port number). |
| 413 | */ |
| 414 | static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc, |
| 415 | struct wusb_dev *wusb_dev) |
| 416 | { |
| 417 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 418 | struct wahc *wa = &hwahc->wa; |
| 419 | u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| 420 | struct hwa_dev_info *dev_info; |
| 421 | int ret; |
| 422 | |
| 423 | /* fill out the Device Info buffer and send it */ |
| 424 | dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL); |
| 425 | if (!dev_info) |
| 426 | return -ENOMEM; |
| 427 | uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability, |
| 428 | &wusb_dev->availability); |
| 429 | dev_info->bDeviceAddress = wusb_dev->addr; |
| 430 | |
| 431 | /* |
| 432 | * If the descriptors haven't been read yet, use a default PHY |
| 433 | * rate of 53.3 Mbit/s only. The correct value will be used |
| 434 | * when this will be called again as part of the |
| 435 | * authentication process (which occurs after the descriptors |
| 436 | * have been read). |
| 437 | */ |
| 438 | if (wusb_dev->wusb_cap_descr) |
| 439 | dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates; |
| 440 | else |
| 441 | dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53); |
| 442 | |
| 443 | ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| 444 | WUSB_REQ_SET_DEV_INFO, |
| 445 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 446 | 0, wusb_dev->port_idx << 8 | iface_no, |
| 447 | dev_info, sizeof(struct hwa_dev_info), |
| 448 | 1000 /* FIXME: arbitrary */); |
| 449 | kfree(dev_info); |
| 450 | return ret; |
| 451 | } |
| 452 | |
| 453 | /* |
| 454 | * Set host's idea of which encryption (and key) method to use when |
| 455 | * talking to ad evice on a given port. |
| 456 | * |
| 457 | * If key is NULL, it means disable encryption for that "virtual port" |
| 458 | * (used when we disconnect). |
| 459 | */ |
| 460 | static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, |
| 461 | const void *key, size_t key_size, |
| 462 | u8 key_idx) |
| 463 | { |
| 464 | int result = -ENOMEM; |
| 465 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 466 | struct wahc *wa = &hwahc->wa; |
| 467 | u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| 468 | struct usb_key_descriptor *keyd; |
| 469 | size_t keyd_len; |
| 470 | |
| 471 | keyd_len = sizeof(*keyd) + key_size; |
| 472 | keyd = kzalloc(keyd_len, GFP_KERNEL); |
| 473 | if (keyd == NULL) |
| 474 | return -ENOMEM; |
| 475 | |
| 476 | keyd->bLength = keyd_len; |
| 477 | keyd->bDescriptorType = USB_DT_KEY; |
| 478 | keyd->tTKID[0] = (tkid >> 0) & 0xff; |
| 479 | keyd->tTKID[1] = (tkid >> 8) & 0xff; |
| 480 | keyd->tTKID[2] = (tkid >> 16) & 0xff; |
| 481 | memcpy(keyd->bKeyData, key, key_size); |
| 482 | |
| 483 | result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| 484 | USB_REQ_SET_DESCRIPTOR, |
| 485 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 486 | USB_DT_KEY << 8 | key_idx, |
| 487 | port_idx << 8 | iface_no, |
| 488 | keyd, keyd_len, 1000 /* FIXME: arbitrary */); |
| 489 | |
| 490 | memset(keyd, 0, sizeof(*keyd)); /* clear keys etc. */ |
| 491 | kfree(keyd); |
| 492 | return result; |
| 493 | } |
| 494 | |
| 495 | /* |
| 496 | * Set host's idea of which encryption (and key) method to use when |
| 497 | * talking to ad evice on a given port. |
| 498 | * |
| 499 | * If key is NULL, it means disable encryption for that "virtual port" |
| 500 | * (used when we disconnect). |
| 501 | */ |
| 502 | static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, |
| 503 | const void *key, size_t key_size) |
| 504 | { |
| 505 | int result = -ENOMEM; |
| 506 | struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 507 | struct wahc *wa = &hwahc->wa; |
| 508 | u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| 509 | u8 encryption_value; |
| 510 | |
| 511 | /* Tell the host which key to use to talk to the device */ |
| 512 | if (key) { |
| 513 | u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK, |
| 514 | WUSB_KEY_INDEX_ORIGINATOR_HOST); |
| 515 | |
| 516 | result = __hwahc_dev_set_key(wusbhc, port_idx, tkid, |
| 517 | key, key_size, key_idx); |
| 518 | if (result < 0) |
| 519 | goto error_set_key; |
| 520 | encryption_value = wusbhc->ccm1_etd->bEncryptionValue; |
| 521 | } else { |
| 522 | /* FIXME: this should come from wusbhc->etd[UNSECURE].value */ |
| 523 | encryption_value = 0; |
| 524 | } |
| 525 | |
| 526 | /* Set the encryption type for commmunicating with the device */ |
| 527 | result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| 528 | USB_REQ_SET_ENCRYPTION, |
| 529 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 530 | encryption_value, port_idx << 8 | iface_no, |
| 531 | NULL, 0, 1000 /* FIXME: arbitrary */); |
| 532 | if (result < 0) |
| 533 | dev_err(wusbhc->dev, "Can't set host's WUSB encryption for " |
| 534 | "port index %u to %s (value %d): %d\n", port_idx, |
| 535 | wusb_et_name(wusbhc->ccm1_etd->bEncryptionType), |
| 536 | wusbhc->ccm1_etd->bEncryptionValue, result); |
| 537 | error_set_key: |
| 538 | return result; |
| 539 | } |
| 540 | |
| 541 | /* |
| 542 | * Set host's GTK key |
| 543 | */ |
| 544 | static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid, |
| 545 | const void *key, size_t key_size) |
| 546 | { |
| 547 | u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, |
| 548 | WUSB_KEY_INDEX_ORIGINATOR_HOST); |
| 549 | |
| 550 | return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx); |
| 551 | } |
| 552 | |
| 553 | /* |
| 554 | * Get the Wire Adapter class-specific descriptor |
| 555 | * |
| 556 | * NOTE: this descriptor comes with the big bundled configuration |
| 557 | * descriptor that includes the interfaces' and endpoints', so |
| 558 | * we just look for it in the cached copy kept by the USB stack. |
| 559 | * |
| 560 | * NOTE2: We convert LE fields to CPU order. |
| 561 | */ |
| 562 | static int wa_fill_descr(struct wahc *wa) |
| 563 | { |
| 564 | int result; |
| 565 | struct device *dev = &wa->usb_iface->dev; |
| 566 | char *itr; |
| 567 | struct usb_device *usb_dev = wa->usb_dev; |
| 568 | struct usb_descriptor_header *hdr; |
| 569 | struct usb_wa_descriptor *wa_descr; |
| 570 | size_t itr_size, actconfig_idx; |
| 571 | |
| 572 | actconfig_idx = (usb_dev->actconfig - usb_dev->config) / |
| 573 | sizeof(usb_dev->config[0]); |
| 574 | itr = usb_dev->rawdescriptors[actconfig_idx]; |
| 575 | itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); |
| 576 | while (itr_size >= sizeof(*hdr)) { |
| 577 | hdr = (struct usb_descriptor_header *) itr; |
| 578 | d_printf(3, dev, "Extra device descriptor: " |
| 579 | "type %02x/%u bytes @ %zu (%zu left)\n", |
| 580 | hdr->bDescriptorType, hdr->bLength, |
| 581 | (itr - usb_dev->rawdescriptors[actconfig_idx]), |
| 582 | itr_size); |
| 583 | if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER) |
| 584 | goto found; |
| 585 | itr += hdr->bLength; |
| 586 | itr_size -= hdr->bLength; |
| 587 | } |
| 588 | dev_err(dev, "cannot find Wire Adapter Class descriptor\n"); |
| 589 | return -ENODEV; |
| 590 | |
| 591 | found: |
| 592 | result = -EINVAL; |
| 593 | if (hdr->bLength > itr_size) { /* is it available? */ |
| 594 | dev_err(dev, "incomplete Wire Adapter Class descriptor " |
| 595 | "(%zu bytes left, %u needed)\n", |
| 596 | itr_size, hdr->bLength); |
| 597 | goto error; |
| 598 | } |
| 599 | if (hdr->bLength < sizeof(*wa->wa_descr)) { |
| 600 | dev_err(dev, "short Wire Adapter Class descriptor\n"); |
| 601 | goto error; |
| 602 | } |
| 603 | wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; |
| 604 | /* Make LE fields CPU order */ |
| 605 | wa_descr->bcdWAVersion = le16_to_cpu(wa_descr->bcdWAVersion); |
| 606 | wa_descr->wNumRPipes = le16_to_cpu(wa_descr->wNumRPipes); |
| 607 | wa_descr->wRPipeMaxBlock = le16_to_cpu(wa_descr->wRPipeMaxBlock); |
| 608 | if (wa_descr->bcdWAVersion > 0x0100) |
| 609 | dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", |
| 610 | wa_descr->bcdWAVersion & 0xff00 >> 8, |
| 611 | wa_descr->bcdWAVersion & 0x00ff); |
| 612 | result = 0; |
| 613 | error: |
| 614 | return result; |
| 615 | } |
| 616 | |
| 617 | static struct hc_driver hwahc_hc_driver = { |
| 618 | .description = "hwa-hcd", |
| 619 | .product_desc = "Wireless USB HWA host controller", |
| 620 | .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd), |
| 621 | .irq = NULL, /* FIXME */ |
| 622 | .flags = HCD_USB2, /* FIXME */ |
| 623 | .reset = hwahc_op_reset, |
| 624 | .start = hwahc_op_start, |
| 625 | .pci_suspend = hwahc_op_suspend, |
| 626 | .pci_resume = hwahc_op_resume, |
| 627 | .stop = hwahc_op_stop, |
| 628 | .get_frame_number = hwahc_op_get_frame_number, |
| 629 | .urb_enqueue = hwahc_op_urb_enqueue, |
| 630 | .urb_dequeue = hwahc_op_urb_dequeue, |
| 631 | .endpoint_disable = hwahc_op_endpoint_disable, |
| 632 | |
| 633 | .hub_status_data = wusbhc_rh_status_data, |
| 634 | .hub_control = wusbhc_rh_control, |
| 635 | .bus_suspend = wusbhc_rh_suspend, |
| 636 | .bus_resume = wusbhc_rh_resume, |
| 637 | .start_port_reset = wusbhc_rh_start_port_reset, |
| 638 | }; |
| 639 | |
| 640 | static int hwahc_security_create(struct hwahc *hwahc) |
| 641 | { |
| 642 | int result; |
| 643 | struct wusbhc *wusbhc = &hwahc->wusbhc; |
| 644 | struct usb_device *usb_dev = hwahc->wa.usb_dev; |
| 645 | struct device *dev = &usb_dev->dev; |
| 646 | struct usb_security_descriptor *secd; |
| 647 | struct usb_encryption_descriptor *etd; |
| 648 | void *itr, *top; |
| 649 | size_t itr_size, needed, bytes; |
| 650 | u8 index; |
| 651 | char buf[64]; |
| 652 | |
| 653 | /* Find the host's security descriptors in the config descr bundle */ |
| 654 | index = (usb_dev->actconfig - usb_dev->config) / |
| 655 | sizeof(usb_dev->config[0]); |
| 656 | itr = usb_dev->rawdescriptors[index]; |
| 657 | itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); |
| 658 | top = itr + itr_size; |
| 659 | result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], |
| 660 | le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), |
| 661 | USB_DT_SECURITY, (void **) &secd); |
| 662 | if (result == -1) { |
| 663 | dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); |
| 664 | return 0; |
| 665 | } |
| 666 | needed = sizeof(*secd); |
| 667 | if (top - (void *)secd < needed) { |
| 668 | dev_err(dev, "BUG? Not enough data to process security " |
| 669 | "descriptor header (%zu bytes left vs %zu needed)\n", |
| 670 | top - (void *) secd, needed); |
| 671 | return 0; |
| 672 | } |
| 673 | needed = le16_to_cpu(secd->wTotalLength); |
| 674 | if (top - (void *)secd < needed) { |
| 675 | dev_err(dev, "BUG? Not enough data to process security " |
| 676 | "descriptors (%zu bytes left vs %zu needed)\n", |
| 677 | top - (void *) secd, needed); |
| 678 | return 0; |
| 679 | } |
| 680 | /* Walk over the sec descriptors and store CCM1's on wusbhc */ |
| 681 | itr = (void *) secd + sizeof(*secd); |
| 682 | top = (void *) secd + le16_to_cpu(secd->wTotalLength); |
| 683 | index = 0; |
| 684 | bytes = 0; |
| 685 | while (itr < top) { |
| 686 | etd = itr; |
| 687 | if (top - itr < sizeof(*etd)) { |
| 688 | dev_err(dev, "BUG: bad host security descriptor; " |
| 689 | "not enough data (%zu vs %zu left)\n", |
| 690 | top - itr, sizeof(*etd)); |
| 691 | break; |
| 692 | } |
| 693 | if (etd->bLength < sizeof(*etd)) { |
| 694 | dev_err(dev, "BUG: bad host encryption descriptor; " |
| 695 | "descriptor is too short " |
| 696 | "(%zu vs %zu needed)\n", |
| 697 | (size_t)etd->bLength, sizeof(*etd)); |
| 698 | break; |
| 699 | } |
| 700 | itr += etd->bLength; |
| 701 | bytes += snprintf(buf + bytes, sizeof(buf) - bytes, |
| 702 | "%s (0x%02x) ", |
| 703 | wusb_et_name(etd->bEncryptionType), |
| 704 | etd->bEncryptionValue); |
| 705 | wusbhc->ccm1_etd = etd; |
| 706 | } |
| 707 | dev_info(dev, "supported encryption types: %s\n", buf); |
| 708 | if (wusbhc->ccm1_etd == NULL) { |
| 709 | dev_err(dev, "E: host doesn't support CCM-1 crypto\n"); |
| 710 | return 0; |
| 711 | } |
| 712 | /* Pretty print what we support */ |
| 713 | return 0; |
| 714 | } |
| 715 | |
| 716 | static void hwahc_security_release(struct hwahc *hwahc) |
| 717 | { |
| 718 | /* nothing to do here so far... */ |
| 719 | } |
| 720 | |
| 721 | static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface) |
| 722 | { |
| 723 | int result; |
| 724 | struct device *dev = &iface->dev; |
| 725 | struct wusbhc *wusbhc = &hwahc->wusbhc; |
| 726 | struct wahc *wa = &hwahc->wa; |
| 727 | struct usb_device *usb_dev = interface_to_usbdev(iface); |
| 728 | |
| 729 | wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ |
| 730 | wa->usb_iface = usb_get_intf(iface); |
| 731 | wusbhc->dev = dev; |
| 732 | wusbhc->uwb_rc = uwb_rc_get_by_grandpa(iface->dev.parent); |
| 733 | if (wusbhc->uwb_rc == NULL) { |
| 734 | result = -ENODEV; |
| 735 | dev_err(dev, "Cannot get associated UWB Host Controller\n"); |
| 736 | goto error_rc_get; |
| 737 | } |
| 738 | result = wa_fill_descr(wa); /* Get the device descriptor */ |
| 739 | if (result < 0) |
| 740 | goto error_fill_descriptor; |
| 741 | if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) { |
| 742 | dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB " |
| 743 | "adapter (%u ports)\n", wa->wa_descr->bNumPorts); |
| 744 | wusbhc->ports_max = USB_MAXCHILDREN; |
| 745 | } else { |
| 746 | wusbhc->ports_max = wa->wa_descr->bNumPorts; |
| 747 | } |
| 748 | wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs; |
| 749 | wusbhc->start = __hwahc_op_wusbhc_start; |
| 750 | wusbhc->stop = __hwahc_op_wusbhc_stop; |
| 751 | wusbhc->mmcie_add = __hwahc_op_mmcie_add; |
| 752 | wusbhc->mmcie_rm = __hwahc_op_mmcie_rm; |
| 753 | wusbhc->dev_info_set = __hwahc_op_dev_info_set; |
| 754 | wusbhc->bwa_set = __hwahc_op_bwa_set; |
| 755 | wusbhc->set_num_dnts = __hwahc_op_set_num_dnts; |
| 756 | wusbhc->set_ptk = __hwahc_op_set_ptk; |
| 757 | wusbhc->set_gtk = __hwahc_op_set_gtk; |
| 758 | result = hwahc_security_create(hwahc); |
| 759 | if (result < 0) { |
| 760 | dev_err(dev, "Can't initialize security: %d\n", result); |
| 761 | goto error_security_create; |
| 762 | } |
| 763 | wa->wusb = wusbhc; /* FIXME: ugly, need to fix */ |
| 764 | result = wusbhc_create(&hwahc->wusbhc); |
| 765 | if (result < 0) { |
| 766 | dev_err(dev, "Can't create WUSB HC structures: %d\n", result); |
| 767 | goto error_wusbhc_create; |
| 768 | } |
| 769 | result = wa_create(&hwahc->wa, iface); |
| 770 | if (result < 0) |
| 771 | goto error_wa_create; |
| 772 | return 0; |
| 773 | |
| 774 | error_wa_create: |
| 775 | wusbhc_destroy(&hwahc->wusbhc); |
| 776 | error_wusbhc_create: |
| 777 | /* WA Descr fill allocs no resources */ |
| 778 | error_security_create: |
| 779 | error_fill_descriptor: |
| 780 | uwb_rc_put(wusbhc->uwb_rc); |
| 781 | error_rc_get: |
| 782 | usb_put_intf(iface); |
| 783 | usb_put_dev(usb_dev); |
| 784 | return result; |
| 785 | } |
| 786 | |
| 787 | static void hwahc_destroy(struct hwahc *hwahc) |
| 788 | { |
| 789 | struct wusbhc *wusbhc = &hwahc->wusbhc; |
| 790 | |
| 791 | d_fnstart(1, NULL, "(hwahc %p)\n", hwahc); |
| 792 | mutex_lock(&wusbhc->mutex); |
| 793 | __wa_destroy(&hwahc->wa); |
| 794 | wusbhc_destroy(&hwahc->wusbhc); |
| 795 | hwahc_security_release(hwahc); |
| 796 | hwahc->wusbhc.dev = NULL; |
| 797 | uwb_rc_put(wusbhc->uwb_rc); |
| 798 | usb_put_intf(hwahc->wa.usb_iface); |
| 799 | usb_put_dev(hwahc->wa.usb_dev); |
| 800 | mutex_unlock(&wusbhc->mutex); |
| 801 | d_fnend(1, NULL, "(hwahc %p) = void\n", hwahc); |
| 802 | } |
| 803 | |
| 804 | static void hwahc_init(struct hwahc *hwahc) |
| 805 | { |
| 806 | wa_init(&hwahc->wa); |
| 807 | } |
| 808 | |
| 809 | static int hwahc_probe(struct usb_interface *usb_iface, |
| 810 | const struct usb_device_id *id) |
| 811 | { |
| 812 | int result; |
| 813 | struct usb_hcd *usb_hcd; |
| 814 | struct wusbhc *wusbhc; |
| 815 | struct hwahc *hwahc; |
| 816 | struct device *dev = &usb_iface->dev; |
| 817 | |
| 818 | d_fnstart(4, dev, "(%p, %p)\n", usb_iface, id); |
| 819 | result = -ENOMEM; |
| 820 | usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa"); |
| 821 | if (usb_hcd == NULL) { |
| 822 | dev_err(dev, "unable to allocate instance\n"); |
| 823 | goto error_alloc; |
| 824 | } |
| 825 | usb_hcd->wireless = 1; |
| 826 | usb_hcd->flags |= HCD_FLAG_SAW_IRQ; |
| 827 | wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 828 | hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 829 | hwahc_init(hwahc); |
| 830 | result = hwahc_create(hwahc, usb_iface); |
| 831 | if (result < 0) { |
| 832 | dev_err(dev, "Cannot initialize internals: %d\n", result); |
| 833 | goto error_hwahc_create; |
| 834 | } |
| 835 | result = usb_add_hcd(usb_hcd, 0, 0); |
| 836 | if (result < 0) { |
| 837 | dev_err(dev, "Cannot add HCD: %d\n", result); |
| 838 | goto error_add_hcd; |
| 839 | } |
| 840 | result = wusbhc_b_create(&hwahc->wusbhc); |
| 841 | if (result < 0) { |
| 842 | dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result); |
| 843 | goto error_wusbhc_b_create; |
| 844 | } |
| 845 | d_fnend(4, dev, "(%p, %p) = 0\n", usb_iface, id); |
| 846 | return 0; |
| 847 | |
| 848 | error_wusbhc_b_create: |
| 849 | usb_remove_hcd(usb_hcd); |
| 850 | error_add_hcd: |
| 851 | hwahc_destroy(hwahc); |
| 852 | error_hwahc_create: |
| 853 | usb_put_hcd(usb_hcd); |
| 854 | error_alloc: |
| 855 | d_fnend(4, dev, "(%p, %p) = %d\n", usb_iface, id, result); |
| 856 | return result; |
| 857 | } |
| 858 | |
| 859 | static void hwahc_disconnect(struct usb_interface *usb_iface) |
| 860 | { |
| 861 | struct usb_hcd *usb_hcd; |
| 862 | struct wusbhc *wusbhc; |
| 863 | struct hwahc *hwahc; |
| 864 | |
| 865 | usb_hcd = usb_get_intfdata(usb_iface); |
| 866 | wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| 867 | hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| 868 | |
| 869 | d_fnstart(1, NULL, "(hwahc %p [usb_iface %p])\n", hwahc, usb_iface); |
| 870 | wusbhc_b_destroy(&hwahc->wusbhc); |
| 871 | usb_remove_hcd(usb_hcd); |
| 872 | hwahc_destroy(hwahc); |
| 873 | usb_put_hcd(usb_hcd); |
| 874 | d_fnend(1, NULL, "(hwahc %p [usb_iface %p]) = void\n", hwahc, |
| 875 | usb_iface); |
| 876 | } |
| 877 | |
| 878 | /** USB device ID's that we handle */ |
| 879 | static struct usb_device_id hwahc_id_table[] = { |
| 880 | /* FIXME: use class labels for this */ |
| 881 | { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, |
| 882 | {}, |
| 883 | }; |
| 884 | MODULE_DEVICE_TABLE(usb, hwahc_id_table); |
| 885 | |
| 886 | static struct usb_driver hwahc_driver = { |
| 887 | .name = "hwa-hc", |
| 888 | .probe = hwahc_probe, |
| 889 | .disconnect = hwahc_disconnect, |
| 890 | .id_table = hwahc_id_table, |
| 891 | }; |
| 892 | |
| 893 | static int __init hwahc_driver_init(void) |
| 894 | { |
| 895 | int result; |
| 896 | result = usb_register(&hwahc_driver); |
| 897 | if (result < 0) { |
| 898 | printk(KERN_ERR "WA-CDS: Cannot register USB driver: %d\n", |
| 899 | result); |
| 900 | goto error_usb_register; |
| 901 | } |
| 902 | return 0; |
| 903 | |
| 904 | error_usb_register: |
| 905 | return result; |
| 906 | |
| 907 | } |
| 908 | module_init(hwahc_driver_init); |
| 909 | |
| 910 | static void __exit hwahc_driver_exit(void) |
| 911 | { |
| 912 | usb_deregister(&hwahc_driver); |
| 913 | } |
| 914 | module_exit(hwahc_driver_exit); |
| 915 | |
| 916 | |
| 917 | MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); |
| 918 | MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver"); |
| 919 | MODULE_LICENSE("GPL"); |