Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 4dcef52400fa6b9eb2de589300ae0151a1c65b3b / . / drivers / media / video / bttv-cards.c
blob: a97b9b958ed6d4ca3858519dec5750c6bc8198b0 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]1/*
Michael Krufky7fd0f3a2005-07-27 11:45:53 -0700[diff] [blame]2 $Id: bttv-cards.c,v 1.54 2005/07/19 18:26:46 mkrufky Exp $
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3
4 bttv-cards.c
5
6 this file has configuration informations - card-specific stuff
7 like the big tvcards array for the most part
8
9 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
10 & Marcus Metzler (mocm@thp.uni-koeln.de)
11 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12
13 This program is free software; you can redistribute it and/or modify
14 it under the terms of the GNU General Public License as published by
15 the Free Software Foundation; either version 2 of the License, or
16 (at your option) any later version.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 You should have received a copy of the GNU General Public License
24 along with this program; if not, write to the Free Software
25 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26
27*/
28
29#include <linux/config.h>
30#include <linux/delay.h>
31#include <linux/module.h>
32#include <linux/moduleparam.h>
33#include <linux/kmod.h>
34#include <linux/init.h>
35#include <linux/pci.h>
36#include <linux/vmalloc.h>
37#include <linux/firmware.h>
38
39#include <asm/io.h>
40
41#include "bttvp.h"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]42
43/* fwd decl */
44static void boot_msp34xx(struct bttv *btv, int pin);
45static void boot_bt832(struct bttv *btv);
46static void hauppauge_eeprom(struct bttv *btv);
47static void avermedia_eeprom(struct bttv *btv);
48static void osprey_eeprom(struct bttv *btv);
49static void modtec_eeprom(struct bttv *btv);
50static void init_PXC200(struct bttv *btv);
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]51static void init_RTV24(struct bttv *btv);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]52
53static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
54static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
55static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
56 int set);
57static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
58 int set);
59static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
60static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
61static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
62static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
63static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
64static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
65static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
66static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
67static void rv605_muxsel(struct bttv *btv, unsigned int input);
68static void eagle_muxsel(struct bttv *btv, unsigned int input);
69static void xguard_muxsel(struct bttv *btv, unsigned int input);
70static void ivc120_muxsel(struct bttv *btv, unsigned int input);
71static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
72
73static void PXC200_muxsel(struct bttv *btv, unsigned int input);
74
75static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
76static void picolo_tetra_init(struct bttv *btv);
77
78static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
79static void tibetCS16_init(struct bttv *btv);
80
81static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
82static void kodicom4400r_init(struct bttv *btv);
83
84static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
85static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
86
87static int terratec_active_radio_upgrade(struct bttv *btv);
88static int tea5757_read(struct bttv *btv);
89static int tea5757_write(struct bttv *btv, int value);
90static void identify_by_eeprom(struct bttv *btv,
91 unsigned char eeprom_data[256]);
92static int __devinit pvr_boot(struct bttv *btv);
93
94/* config variables */
95static unsigned int triton1=0;
96static unsigned int vsfx=0;
97static unsigned int latency = UNSET;
Mauro Carvalho Chehab4dcef522005-08-04 12:53:30 -0700[diff] [blame^]98int no_overlay=-1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]99
100static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
104static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
105static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
106#ifdef MODULE
107static unsigned int autoload = 1;
108#else
109static unsigned int autoload = 0;
110#endif
111static unsigned int gpiomask = UNSET;
112static unsigned int audioall = UNSET;
113static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
114
115/* insmod options */
116module_param(triton1, int, 0444);
117module_param(vsfx, int, 0444);
118module_param(no_overlay, int, 0444);
119module_param(latency, int, 0444);
120module_param(gpiomask, int, 0444);
121module_param(audioall, int, 0444);
122module_param(autoload, int, 0444);
123
124module_param_array(card, int, NULL, 0444);
125module_param_array(pll, int, NULL, 0444);
126module_param_array(tuner, int, NULL, 0444);
127module_param_array(svhs, int, NULL, 0444);
128module_param_array(remote, int, NULL, 0444);
129module_param_array(audiomux, int, NULL, 0444);
130
131MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
132 "[enable bug compatibility for triton1 + others]");
133MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
134 "[yet another chipset flaw workaround]");
135MODULE_PARM_DESC(latency,"pci latency timer");
136MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
137MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
138MODULE_PARM_DESC(tuner,"specify installed tuner type");
139MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
140
141/* ----------------------------------------------------------------------- */
142/* list of card IDs for bt878+ cards */
143
144static struct CARD {
145 unsigned id;
146 int cardnr;
147 char *name;
148} cards[] __devinitdata = {
149 { 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
150 { 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
151 { 0x45000070, BTTV_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
152 { 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
153 { 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
154 { 0xff020070, BTTV_OSPREY500, "Osprey-500" },
155 { 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },
156 { 0xff040070, BTTV_OSPREY540, "Osprey-540" },
157
158 { 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
159 { 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
160
161 { 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
162 { 0x6607107d, BTTV_WINFASTVC100, "Leadtek WinFast VC 100" },
163 { 0x6609107d, BTTV_WINFAST2000, "Leadtek TV 2000 XP" },
164 { 0x263610b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
165 { 0x264510b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
166 { 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
167 { 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
168 { 0x407010fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
169 { 0xd01810fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
170
171 { 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
172 // some cards ship with byteswapped IDs ...
173 { 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
174 { 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
175 // this seems to happen as well ...
176 { 0xff1211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
177
178 { 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
179 { 0x263710b4, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
180 { 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" },
181
182 { 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
183 { 0xa005144f, BTTV_MAGICTVIEW063, "CPH06X TView99-Card" },
184 { 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
185 { 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
186 { 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" },
187 { 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
188 { 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
189
190 { 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
191 { 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
192 { 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
193 { 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
194 { 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
195
196 { 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
197 { 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
198 { 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
199 { 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
200
201 { 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
202 { 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" },
203 // clashes with FlyVideo
204 //{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" },
205 { 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" },
206 { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // LR102
207 { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, // ??
208 { 0xff3b153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // ??
209
210 { 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
211 { 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
212 { 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
213 { 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
214 { 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
215
216 { 0x1430aa00, BTTV_PV143, "Provideo PV143A" },
217 { 0x1431aa00, BTTV_PV143, "Provideo PV143B" },
218 { 0x1432aa00, BTTV_PV143, "Provideo PV143C" },
219 { 0x1433aa00, BTTV_PV143, "Provideo PV143D" },
220 { 0x1433aa03, BTTV_PV143, "Security Eyes" },
221
222 { 0x1460aa00, BTTV_PV150, "Provideo PV150A-1" },
223 { 0x1461aa01, BTTV_PV150, "Provideo PV150A-2" },
224 { 0x1462aa02, BTTV_PV150, "Provideo PV150A-3" },
225 { 0x1463aa03, BTTV_PV150, "Provideo PV150A-4" },
226
227 { 0x1464aa04, BTTV_PV150, "Provideo PV150B-1" },
228 { 0x1465aa05, BTTV_PV150, "Provideo PV150B-2" },
229 { 0x1466aa06, BTTV_PV150, "Provideo PV150B-3" },
230 { 0x1467aa07, BTTV_PV150, "Provideo PV150B-4" },
231
232 { 0xa132ff00, BTTV_IVC100, "IVC-100" },
233 { 0xa1550000, BTTV_IVC200, "IVC-200" },
234 { 0xa1550001, BTTV_IVC200, "IVC-200" },
235 { 0xa1550002, BTTV_IVC200, "IVC-200" },
236 { 0xa1550003, BTTV_IVC200, "IVC-200" },
237 { 0xa1550100, BTTV_IVC200, "IVC-200G" },
238 { 0xa1550101, BTTV_IVC200, "IVC-200G" },
239 { 0xa1550102, BTTV_IVC200, "IVC-200G" },
240 { 0xa1550103, BTTV_IVC200, "IVC-200G" },
241 { 0xa182ff00, BTTV_IVC120, "IVC-120G" },
242 { 0xa182ff01, BTTV_IVC120, "IVC-120G" },
243 { 0xa182ff02, BTTV_IVC120, "IVC-120G" },
244 { 0xa182ff03, BTTV_IVC120, "IVC-120G" },
245 { 0xa182ff04, BTTV_IVC120, "IVC-120G" },
246 { 0xa182ff05, BTTV_IVC120, "IVC-120G" },
247 { 0xa182ff06, BTTV_IVC120, "IVC-120G" },
248 { 0xa182ff07, BTTV_IVC120, "IVC-120G" },
249 { 0xa182ff08, BTTV_IVC120, "IVC-120G" },
250 { 0xa182ff09, BTTV_IVC120, "IVC-120G" },
251 { 0xa182ff0a, BTTV_IVC120, "IVC-120G" },
252 { 0xa182ff0b, BTTV_IVC120, "IVC-120G" },
253 { 0xa182ff0c, BTTV_IVC120, "IVC-120G" },
254 { 0xa182ff0d, BTTV_IVC120, "IVC-120G" },
255 { 0xa182ff0e, BTTV_IVC120, "IVC-120G" },
256 { 0xa182ff0f, BTTV_IVC120, "IVC-120G" },
257
258 { 0x41424344, BTTV_GRANDTEC, "GrandTec Multi Capture" },
259 { 0x01020304, BTTV_XGUARD, "Grandtec Grand X-Guard" },
260
261 { 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
262 { 0xa0501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
263 { 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
264 { 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
265 { 0x41a0a051, BTTV_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
266 { 0x18501f7f, BTTV_FLYVIDEO_98, "Lifeview Flyvideo 98" },
267
268 { 0x010115cb, BTTV_GMV1, "AG GMV1" },
269 { 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
270
271 { 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
272 { 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
273 { 0xfff6f6ff, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
274 { 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
275 { 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
276 { 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
277 { 0x20007063, BTTV_PC_HDTV, "pcHDTV HD-2000 TV"},
278 { 0x82b2aa6a, BTTV_SIMUS_GVC1100, "SIMUS GVC1100" },
279 { 0x146caa0c, BTTV_PV951, "ituner spectra8" },
280 { 0x200a1295, BTTV_PXC200, "ImageNation PXC200A" },
281
282 { 0x40111554, BTTV_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
283 { 0x17de0a01, BTTV_KWORLD, "Mecer TV/FM/Video Tuner" },
284
285 { 0x01051805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
286 { 0x01061805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
287 { 0x01071805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
288 { 0x01081805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
289
290 // likely broken, vendor id doesn't match the other magic views ...
291 //{ 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" },
292
293 // DVB cards (using pci function .1 for mpeg data xfer)
294 { 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
295 { 0x07611461, BTTV_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
296 { 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" },
297 { 0x002611bd, BTTV_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
298 { 0x00011822, BTTV_TWINHAN_DST, "Twinhan VisionPlus DVB" },
299 { 0xfc00270f, BTTV_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
300 { 0x07711461, BTTV_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
301 { 0xdb1018ac, BTTV_DVICO_DVBT_LITE, "DVICO FusionHDTV DVB-T Lite" },
302
303 { 0, -1, NULL }
304};
305
306/* ----------------------------------------------------------------------- */
307/* array with description for bt848 / bt878 tv/grabber cards */
308
309struct tvcard bttv_tvcards[] = {
310{
311/* ---- card 0x00 ---------------------------------- */
312 .name = " *** UNKNOWN/GENERIC *** ",
313 .video_inputs = 4,
314 .audio_inputs = 1,
315 .tuner = 0,
316 .svhs = 2,
317 .muxsel = { 2, 3, 1, 0},
318 .tuner_type = -1,
319},{
320 .name = "MIRO PCTV",
321 .video_inputs = 4,
322 .audio_inputs = 1,
323 .tuner = 0,
324 .svhs = 2,
325 .gpiomask = 15,
326 .muxsel = { 2, 3, 1, 1},
327 .audiomux = { 2, 0, 0, 0, 10},
328 .needs_tvaudio = 1,
329 .tuner_type = -1,
330},{
331 .name = "Hauppauge (bt848)",
332 .video_inputs = 4,
333 .audio_inputs = 1,
334 .tuner = 0,
335 .svhs = 2,
336 .gpiomask = 7,
337 .muxsel = { 2, 3, 1, 1},
338 .audiomux = { 0, 1, 2, 3, 4},
339 .needs_tvaudio = 1,
340 .tuner_type = -1,
341},{
342 .name = "STB, Gateway P/N 6000699 (bt848)",
343 .video_inputs = 3,
344 .audio_inputs = 1,
345 .tuner = 0,
346 .svhs = 2,
347 .gpiomask = 7,
348 .muxsel = { 2, 3, 1, 1},
349 .audiomux = { 4, 0, 2, 3, 1},
350 .no_msp34xx = 1,
351 .needs_tvaudio = 1,
352 .tuner_type = TUNER_PHILIPS_NTSC,
353 .pll = PLL_28,
354 .has_radio = 1,
355},{
356
357/* ---- card 0x04 ---------------------------------- */
358 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
359 .video_inputs = 4,
360 .audio_inputs = 0,
361 .tuner = -1,
362 .svhs = 2,
363 .gpiomask = 0,
364 .muxsel = { 2, 3, 1, 1},
365 .audiomux = { 0 },
366 .needs_tvaudio = 0,
367 .tuner_type = 4,
368},{
369 .name = "Diamond DTV2000",
370 .video_inputs = 4,
371 .audio_inputs = 1,
372 .tuner = 0,
373 .svhs = 2,
374 .gpiomask = 3,
375 .muxsel = { 2, 3, 1, 0},
376 .audiomux = { 0, 1, 0, 1, 3},
377 .needs_tvaudio = 1,
378 .tuner_type = -1,
379},{
380 .name = "AVerMedia TVPhone",
381 .video_inputs = 3,
382 .audio_inputs = 1,
383 .tuner = 0,
384 .svhs = 3,
385 .muxsel = { 2, 3, 1, 1},
386 .gpiomask = 0x0f,
387 .audiomux = { 0x0c, 0x04, 0x08, 0x04, 0},
388 /* 0x04 for some cards ?? */
389 .needs_tvaudio = 1,
390 .tuner_type = -1,
391 .audio_hook = avermedia_tvphone_audio,
392 .has_remote = 1,
393},{
394 .name = "MATRIX-Vision MV-Delta",
395 .video_inputs = 5,
396 .audio_inputs = 1,
397 .tuner = -1,
398 .svhs = 3,
399 .gpiomask = 0,
400 .muxsel = { 2, 3, 1, 0, 0},
401 .audiomux = {0 },
402 .needs_tvaudio = 1,
403 .tuner_type = -1,
404},{
405
406/* ---- card 0x08 ---------------------------------- */
407 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
408 .video_inputs = 4,
409 .audio_inputs = 1,
410 .tuner = 0,
411 .svhs = 2,
412 .gpiomask = 0xc00,
413 .muxsel = { 2, 3, 1, 1},
414 .audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
415 .needs_tvaudio = 1,
416 .pll = PLL_28,
417 .tuner_type = -1,
418},{
419 .name = "IMS/IXmicro TurboTV",
420 .video_inputs = 3,
421 .audio_inputs = 1,
422 .tuner = 0,
423 .svhs = 2,
424 .gpiomask = 3,
425 .muxsel = { 2, 3, 1, 1},
426 .audiomux = { 1, 1, 2, 3, 0},
427 .needs_tvaudio = 0,
428 .pll = PLL_28,
429 .tuner_type = TUNER_TEMIC_PAL,
430},{
431 .name = "Hauppauge (bt878)",
432 .video_inputs = 4,
433 .audio_inputs = 1,
434 .tuner = 0,
435 .svhs = 2,
436 .gpiomask = 0x0f, /* old: 7 */
437 .muxsel = { 2, 0, 1, 1},
438 .audiomux = { 0, 1, 2, 3, 4},
439 .needs_tvaudio = 1,
440 .pll = PLL_28,
441 .tuner_type = -1,
442},{
443 .name = "MIRO PCTV pro",
444 .video_inputs = 3,
445 .audio_inputs = 1,
446 .tuner = 0,
447 .svhs = 2,
448 .gpiomask = 0x3014f,
449 .muxsel = { 2, 3, 1, 1},
450 .audiomux = { 0x20001,0x10001, 0, 0,10},
451 .needs_tvaudio = 1,
452 .tuner_type = -1,
453},{
454
455/* ---- card 0x0c ---------------------------------- */
456 .name = "ADS Technologies Channel Surfer TV (bt848)",
457 .video_inputs = 3,
458 .audio_inputs = 1,
459 .tuner = 0,
460 .svhs = 2,
461 .gpiomask = 15,
462 .muxsel = { 2, 3, 1, 1},
463 .audiomux = { 13, 14, 11, 7, 0, 0},
464 .needs_tvaudio = 1,
465 .tuner_type = -1,
466},{
467 .name = "AVerMedia TVCapture 98",
468 .video_inputs = 3,
469 .audio_inputs = 4,
470 .tuner = 0,
471 .svhs = 2,
472 .gpiomask = 15,
473 .muxsel = { 2, 3, 1, 1},
474 .audiomux = { 13, 14, 11, 7, 0, 0},
475 .needs_tvaudio = 1,
476 .msp34xx_alt = 1,
477 .pll = PLL_28,
478 .tuner_type = TUNER_PHILIPS_PAL,
479 .audio_hook = avermedia_tv_stereo_audio,
480},{
481 .name = "Aimslab Video Highway Xtreme (VHX)",
482 .video_inputs = 3,
483 .audio_inputs = 1,
484 .tuner = 0,
485 .svhs = 2,
486 .gpiomask = 7,
487 .muxsel = { 2, 3, 1, 1},
488 .audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
489 .needs_tvaudio = 1,
490 .pll = PLL_28,
491 .tuner_type = -1,
492},{
493 .name = "Zoltrix TV-Max",
494 .video_inputs = 3,
495 .audio_inputs = 1,
496 .tuner = 0,
497 .svhs = 2,
498 .gpiomask = 15,
499 .muxsel = { 2, 3, 1, 1},
500 .audiomux = {0 , 0, 1 , 0, 10},
501 .needs_tvaudio = 1,
502 .tuner_type = -1,
503},{
504
505/* ---- card 0x10 ---------------------------------- */
506 .name = "Prolink Pixelview PlayTV (bt878)",
507 .video_inputs = 3,
508 .audio_inputs = 1,
509 .tuner = 0,
510 .svhs = 2,
511 .gpiomask = 0x01fe00,
512 .muxsel = { 2, 3, 1, 1},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]513 // 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru>
514 .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]515 .needs_tvaudio = 1,
516 .pll = PLL_28,
517 .tuner_type = -1,
518},{
519 .name = "Leadtek WinView 601",
520 .video_inputs = 3,
521 .audio_inputs = 1,
522 .tuner = 0,
523 .svhs = 2,
524 .gpiomask = 0x8300f8,
525 .muxsel = { 2, 3, 1, 1,0},
526 .audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
527 .needs_tvaudio = 1,
528 .tuner_type = -1,
529 .audio_hook = winview_audio,
530 .has_radio = 1,
531},{
532 .name = "AVEC Intercapture",
533 .video_inputs = 3,
534 .audio_inputs = 2,
535 .tuner = 0,
536 .svhs = 2,
537 .gpiomask = 0,
538 .muxsel = {2, 3, 1, 1},
539 .audiomux = {1, 0, 0, 0, 0},
540 .needs_tvaudio = 1,
541 .tuner_type = -1,
542},{
543 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
544 .video_inputs = 4,
545 .audio_inputs = 1,
546 .tuner = -1,
547 .svhs = -1,
548 .gpiomask = 0x8dff00,
549 .muxsel = { 2, 3, 1, 1},
550 .audiomux = { 0 },
551 .no_msp34xx = 1,
552 .tuner_type = -1,
553},{
554
555/* ---- card 0x14 ---------------------------------- */
556 .name = "CEI Raffles Card",
557 .video_inputs = 3,
558 .audio_inputs = 3,
559 .tuner = 0,
560 .svhs = 2,
561 .muxsel = {2, 3, 1, 1},
562 .tuner_type = -1,
563},{
564 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
565 .video_inputs = 4,
566 .audio_inputs = 2, // tuner, line in
567 .tuner = 0,
568 .svhs = 2,
569 .gpiomask = 0x1800,
570 .muxsel = { 2, 3, 1, 1},
571 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
572 .pll = PLL_28,
573 .tuner_type = TUNER_PHILIPS_PAL_I,
574},{
575 .name = "Askey CPH050/ Phoebe Tv Master + FM",
576 .video_inputs = 3,
577 .audio_inputs = 1,
578 .tuner = 0,
579 .svhs = 2,
580 .gpiomask = 0xc00,
581 .muxsel = { 2, 3, 1, 1},
582 .audiomux = {0, 1, 0x800, 0x400, 0xc00, 0},
583 .needs_tvaudio = 1,
584 .pll = PLL_28,
585 .tuner_type = -1,
586},{
587 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
588 .video_inputs = 3,
589 .audio_inputs = 1,
590 .tuner = 0,
591 .svhs = -1,
592 .gpiomask = 7,
593 .muxsel = { 2, 3, -1 },
594 .digital_mode = DIGITAL_MODE_CAMERA,
595 .audiomux = { 0, 0, 0, 0, 0 },
596 .no_msp34xx = 1,
597 .pll = PLL_28,
598 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
599},{
600
601/* ---- card 0x18 ---------------------------------- */
602 .name = "Askey CPH05X/06X (bt878) [many vendors]",
603 .video_inputs = 3,
604 .audio_inputs = 1,
605 .tuner = 0,
606 .svhs = 2,
607 .gpiomask = 0xe00,
608 .muxsel = { 2, 3, 1, 1},
609 .audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00},
610 .needs_tvaudio = 1,
611 .pll = PLL_28,
612 .tuner_type = -1,
613 .has_remote = 1,
614},{
615 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
616 .video_inputs = 3,
617 .audio_inputs = 1,
618 .tuner = 0,
619 .svhs = 2,
620 .gpiomask = 0x1f0fff,
621 .muxsel = { 2, 3, 1, 1},
622 .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
623 .needs_tvaudio = 0,
624 .tuner_type = TUNER_PHILIPS_PAL,
625 .audio_hook = terratv_audio,
626},{
627 .name = "Hauppauge WinCam newer (bt878)",
628 .video_inputs = 4,
629 .audio_inputs = 1,
630 .tuner = 0,
631 .svhs = 3,
632 .gpiomask = 7,
633 .muxsel = { 2, 0, 1, 1},
634 .audiomux = { 0, 1, 2, 3, 4},
635 .needs_tvaudio = 1,
636 .tuner_type = -1,
637},{
638 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
639 .video_inputs = 4,
640 .audio_inputs = 2,
641 .tuner = 0,
642 .svhs = 2,
643 .gpiomask = 0x1800,
644 .muxsel = { 2, 3, 1, 1},
645 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
646 .pll = PLL_28,
647 .tuner_type = TUNER_PHILIPS_SECAM,
648},{
649
650/* ---- card 0x1c ---------------------------------- */
651 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
652 .video_inputs = 3,
653 .audio_inputs = 1,
654 .tuner = 0,
655 .svhs = 2,
656 .gpiomask = 0x1f0fff,
657 .muxsel = { 2, 3, 1, 1},
658 .audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
659 .needs_tvaudio = 0,
660 .tuner_type = TUNER_PHILIPS_PAL,
661 .audio_hook = terratv_audio,
662 /* GPIO wiring:
663 External 20 pin connector (for Active Radio Upgrade board)
664 gpio00: i2c-sda
665 gpio01: i2c-scl
666 gpio02: om5610-data
667 gpio03: om5610-clk
668 gpio04: om5610-wre
669 gpio05: om5610-stereo
670 gpio06: rds6588-davn
671 gpio07: Pin 7 n.c.
672 gpio08: nIOW
673 gpio09+10: nIOR, nSEL ?? (bt878)
674 gpio09: nIOR (bt848)
675 gpio10: nSEL (bt848)
676 Sound Routing:
677 gpio16: u2-A0 (1st 4052bt)
678 gpio17: u2-A1
679 gpio18: u2-nEN
680 gpio19: u4-A0 (2nd 4052)
681 gpio20: u4-A1
682 u4-nEN - GND
683 Btspy:
684 00000 : Cdrom (internal audio input)
685 10000 : ext. Video audio input
686 20000 : TV Mono
687 a0000 : TV Mono/2
688 1a0000 : TV Stereo
689 30000 : Radio
690 40000 : Mute
691 */
692
693},{
694 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
695 .name = "Imagenation PXC200",
696 .video_inputs = 5,
697 .audio_inputs = 1,
698 .tuner = -1,
699 .svhs = 1, /* was: 4 */
700 .gpiomask = 0,
701 .muxsel = { 2, 3, 1, 0, 0},
702 .audiomux = { 0 },
703 .needs_tvaudio = 1,
704 .tuner_type = -1,
705 .muxsel_hook = PXC200_muxsel,
706
707},{
708 .name = "Lifeview FlyVideo 98 LR50",
709 .video_inputs = 4,
710 .audio_inputs = 1,
711 .tuner = 0,
712 .svhs = 2,
713 .gpiomask = 0x1800, //0x8dfe00
714 .muxsel = { 2, 3, 1, 1},
715 .audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
716 .pll = PLL_28,
717 .tuner_type = -1,
718},{
719 .name = "Formac iProTV, Formac ProTV I (bt848)",
720 .video_inputs = 4,
721 .audio_inputs = 1,
722 .tuner = 0,
723 .svhs = 3,
724 .gpiomask = 1,
725 .muxsel = { 2, 3, 1, 1},
726 .audiomux = { 1, 0, 0, 0, 0 },
727 .pll = PLL_28,
728 .tuner_type = TUNER_PHILIPS_PAL,
729},{
730
731/* ---- card 0x20 ---------------------------------- */
732 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
733 .video_inputs = 4,
734 .audio_inputs = 0,
735 .tuner = -1,
736 .svhs = 2,
737 .gpiomask = 0,
738 .muxsel = { 2, 3, 1, 1},
739 .audiomux = { 0 },
740 .needs_tvaudio = 0,
741 .tuner_type = 4,
742},{
743 .name = "Terratec TerraTValue Version Bt878",
744 .video_inputs = 3,
745 .audio_inputs = 1,
746 .tuner = 0,
747 .svhs = 2,
748 .gpiomask = 0xffff00,
749 .muxsel = { 2, 3, 1, 1},
750 .audiomux = { 0x500, 0, 0x300, 0x900, 0x900},
751 .needs_tvaudio = 1,
752 .pll = PLL_28,
753 .tuner_type = TUNER_PHILIPS_PAL,
754},{
755 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
756 .video_inputs = 4,
757 .audio_inputs = 1,
758 .tuner = 0,
759 .svhs = 2,
760 .muxsel = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]761 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
762 .gpiomask = 0xb33000,
763 .audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]764 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
765 gpio23 -- hef4052:nEnable (0x800000)
766 gpio12 -- hef4052:A1
767 gpio13 -- hef4052:A0
768 0x0000: external audio
769 0x1000: FM
770 0x2000: TV
771 0x3000: n.c.
772 Note: There exists another variant "Winfast 2000" with tv stereo !?
773 Note: eeprom only contains FF and pci subsystem id 107d:6606
774 */
775 .needs_tvaudio = 0,
776 .pll = PLL_28,
777 .has_radio = 1,
778 .tuner_type = 5, // default for now, gpio reads BFFF06 for Pal bg+dk
779 .audio_hook = winfast2000_audio,
780 .has_remote = 1,
781},{
782 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
783 .video_inputs = 4,
784 .audio_inputs = 3,
785 .tuner = 0,
786 .svhs = 2,
787 .gpiomask = 0x1800,
788 .muxsel = { 2, 3, 1, 1},
789 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
790 .pll = PLL_28,
791 .tuner_type = -1,
792},{
793
794/* ---- card 0x24 ---------------------------------- */
795 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
796 .video_inputs = 4,
797 .audio_inputs = 3,
798 .tuner = 0,
799 .svhs = 2,
800 .gpiomask = 0x1800,
801 .muxsel = { 2, 3, 1, 1},
802 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
803 .pll = PLL_28,
804 .tuner_type = -1,
805 .has_radio = 1,
806},{
807 .name = "Prolink PixelView PlayTV pro",
808 .video_inputs = 3,
809 .audio_inputs = 1,
810 .tuner = 0,
811 .svhs = 2,
812 .gpiomask = 0xff,
813 .muxsel = { 2, 3, 1, 1 },
814 .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
815 .no_msp34xx = 1,
816 .pll = PLL_28,
817 .tuner_type = -1,
818},{
819 .name = "Askey CPH06X TView99",
820 .video_inputs = 4,
821 .audio_inputs = 1,
822 .tuner = 0,
823 .svhs = 2,
824 .gpiomask = 0x551e00,
825 .muxsel = { 2, 3, 1, 0},
826 .audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
827 .needs_tvaudio = 1,
828 .pll = PLL_28,
829 .tuner_type = 1,
830 .has_remote = 1,
831},{
832 .name = "Pinnacle PCTV Studio/Rave",
833 .video_inputs = 3,
834 .audio_inputs = 1,
835 .tuner = 0,
836 .svhs = 2,
837 .gpiomask = 0x03000F,
838 .muxsel = { 2, 3, 1, 1},
839 .audiomux = { 2, 0xd0001, 0, 0, 1},
840 .needs_tvaudio = 0,
841 .pll = PLL_28,
842 .tuner_type = -1,
843},{
844
845/* ---- card 0x28 ---------------------------------- */
846 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
847 .video_inputs = 3,
848 .audio_inputs = 1,
849 .tuner = 0,
850 .svhs = 2,
851 .gpiomask = 7,
852 .muxsel = { 2, 3, 1, 1},
853 .audiomux = { 4, 0, 2, 3, 1},
854 .no_msp34xx = 1,
855 .needs_tvaudio = 1,
856 .tuner_type = TUNER_PHILIPS_NTSC,
857 .pll = PLL_28,
858 .has_radio = 1,
859},{
860 .name = "AVerMedia TVPhone 98",
861 .video_inputs = 3,
862 .audio_inputs = 4,
863 .tuner = 0,
864 .svhs = 2,
865 .gpiomask = 15,
866 .muxsel = { 2, 3, 1, 1},
867 .audiomux = { 13, 4, 11, 7, 0, 0},
868 .needs_tvaudio = 1,
869 .pll = PLL_28,
870 .tuner_type = -1,
871 .has_radio = 1,
872 .audio_hook = avermedia_tvphone_audio,
873},{
874 .name = "ProVideo PV951", /* pic16c54 */
875 .video_inputs = 3,
876 .audio_inputs = 1,
877 .tuner = 0,
878 .svhs = 2,
879 .gpiomask = 0,
880 .muxsel = { 2, 3, 1, 1},
881 .audiomux = { 0, 0, 0, 0, 0},
882 .needs_tvaudio = 1,
883 .no_msp34xx = 1,
884 .pll = PLL_28,
885 .tuner_type = 1,
886},{
887 .name = "Little OnAir TV",
888 .video_inputs = 3,
889 .audio_inputs = 1,
890 .tuner = 0,
891 .svhs = 2,
892 .gpiomask = 0xe00b,
893 .muxsel = {2, 3, 1, 1},
894 .audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
895 .no_msp34xx = 1,
896 .tuner_type = -1,
897},{
898
899/* ---- card 0x2c ---------------------------------- */
900 .name = "Sigma TVII-FM",
901 .video_inputs = 2,
902 .audio_inputs = 1,
903 .tuner = 0,
904 .svhs = -1,
905 .gpiomask = 3,
906 .muxsel = {2, 3, 1, 1},
907 .audiomux = {1, 1, 0, 2, 3},
908 .no_msp34xx = 1,
909 .pll = PLL_NONE,
910 .tuner_type = -1,
911},{
912 .name = "MATRIX-Vision MV-Delta 2",
913 .video_inputs = 5,
914 .audio_inputs = 1,
915 .tuner = -1,
916 .svhs = 3,
917 .gpiomask = 0,
918 .muxsel = { 2, 3, 1, 0, 0},
919 .audiomux = {0 },
920 .no_msp34xx = 1,
921 .pll = PLL_28,
922 .tuner_type = -1,
923},{
924 .name = "Zoltrix Genie TV/FM",
925 .video_inputs = 3,
926 .audio_inputs = 1,
927 .tuner = 0,
928 .svhs = 2,
929 .gpiomask = 0xbcf03f,
930 .muxsel = { 2, 3, 1, 1},
931 .audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
932 .no_msp34xx = 1,
933 .pll = PLL_28,
934 .tuner_type = 21,
935},{
936 .name = "Terratec TV/Radio+",
937 .video_inputs = 3,
938 .audio_inputs = 1,
939 .tuner = 0,
940 .svhs = 2,
941 .gpiomask = 0x70000,
942 .muxsel = { 2, 3, 1, 1},
943 .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
944 .needs_tvaudio = 1,
945 .no_msp34xx = 1,
946 .pll = PLL_35,
947 .tuner_type = 1,
948 .has_radio = 1,
949},{
950
951/* ---- card 0x30 ---------------------------------- */
952 .name = "Askey CPH03x/ Dynalink Magic TView",
953 .video_inputs = 3,
954 .audio_inputs = 1,
955 .tuner = 0,
956 .svhs = 2,
957 .gpiomask = 15,
958 .muxsel = { 2, 3, 1, 1},
959 .audiomux = {2,0,0,0,1},
960 .needs_tvaudio = 1,
961 .pll = PLL_28,
962 .tuner_type = -1,
963},{
964 .name = "IODATA GV-BCTV3/PCI",
965 .video_inputs = 3,
966 .audio_inputs = 1,
967 .tuner = 0,
968 .svhs = 2,
969 .gpiomask = 0x010f00,
970 .muxsel = {2, 3, 0, 0},
971 .audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
972 .no_msp34xx = 1,
973 .pll = PLL_28,
974 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
975 .audio_hook = gvbctv3pci_audio,
976},{
977 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
978 .video_inputs = 5,
979 .audio_inputs = 1,
980 .tuner = 0,
981 .svhs = 3,
982 .gpiomask = 0xAA0000,
983 .muxsel = { 2,3,1,1,-1 },
984 .digital_mode = DIGITAL_MODE_CAMERA,
985 .audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
986 .no_msp34xx = 1,
987 .pll = PLL_28,
988 .tuner_type = TUNER_PHILIPS_PAL_I,
989 .has_remote = 1,
990 /* GPIO wiring: (different from Rev.4C !)
991 GPIO17: U4.A0 (first hef4052bt)
992 GPIO19: U4.A1
993 GPIO20: U5.A1 (second hef4052bt)
994 GPIO21: U4.nEN
995 GPIO22: BT832 Reset Line
996 GPIO23: A5,A0, U5,nEN
997 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
998 */
999},{
1000 .name = "Eagle Wireless Capricorn2 (bt878A)",
1001 .video_inputs = 4,
1002 .audio_inputs = 1,
1003 .tuner = 0,
1004 .svhs = 2,
1005 .gpiomask = 7,
1006 .muxsel = { 2, 0, 1, 1},
1007 .audiomux = { 0, 1, 2, 3, 4},
1008 .pll = PLL_28,
1009 .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1010},{
1011
1012/* ---- card 0x34 ---------------------------------- */
1013 /* David Härdeman <david@2gen.com> */
1014 .name = "Pinnacle PCTV Studio Pro",
1015 .video_inputs = 4,
1016 .audio_inputs = 1,
1017 .tuner = 0,
1018 .svhs = 3,
1019 .gpiomask = 0x03000F,
1020 .muxsel = { 2, 3, 1, 1},
1021 .audiomux = { 1, 0xd0001, 0, 0, 10},
1022 /* sound path (5 sources):
1023 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1024 0= ext. Audio IN
1025 1= from MUX2
1026 2= Mono TV sound from Tuner
1027 3= not connected
1028 MUX2 (mask 0x30000):
1029 0,2,3= from MSP34xx
1030 1= FM stereo Radio from Tuner */
1031 .needs_tvaudio = 0,
1032 .pll = PLL_28,
1033 .tuner_type = -1,
1034},{
1035 /* Claas Langbehn <claas@bigfoot.com>,
1036 Sven Grothklags <sven@upb.de> */
1037 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1038 .video_inputs = 4,
1039 .audio_inputs = 3,
1040 .tuner = 0,
1041 .svhs = 2,
1042 .gpiomask = 0x1c,
1043 .muxsel = { 2, 3, 1, 1},
1044 .audiomux = { 0, 0, 0x10, 8, 4 },
1045 .needs_tvaudio = 1,
1046 .pll = PLL_28,
1047 .tuner_type = TUNER_PHILIPS_PAL,
1048 .has_radio = 1,
1049},{
1050 /* Tim Röstermundt <rosterm@uni-muenster.de>
1051 in de.comp.os.unix.linux.hardware:
1052 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1053 audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1054 options tuner type=5 */
1055 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1056 .video_inputs = 4,
1057 .audio_inputs = 1,
1058 .tuner = 0,
1059 .svhs = 2,
1060 .gpiomask = 0x18e0,
1061 .muxsel = { 2, 3, 1, 1},
1062 .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
1063 /* For cards with tda9820/tda9821:
1064 0x0000: Tuner normal stereo
1065 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1066 0x0880: Tuner A2 stereo */
1067 .pll = PLL_28,
1068 .tuner_type = -1,
1069},{
1070 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1071 old Easy TV BT848 version (model CPH031) */
1072 .name = "Askey CPH031/ BESTBUY Easy TV",
1073 .video_inputs = 4,
1074 .audio_inputs = 1,
1075 .tuner = 0,
1076 .svhs = 2,
1077 .gpiomask = 0xF,
1078 .muxsel = { 2, 3, 1, 0},
1079 .audiomux = { 2, 0, 0, 0, 10},
1080 .needs_tvaudio = 0,
1081 .pll = PLL_28,
1082 .tuner_type = TUNER_TEMIC_PAL,
1083},{
1084
1085/* ---- card 0x38 ---------------------------------- */
1086 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1087 .name = "Lifeview FlyVideo 98FM LR50",
1088 .video_inputs = 4,
1089 .audio_inputs = 3,
1090 .tuner = 0,
1091 .svhs = 2,
1092 .gpiomask = 0x1800,
1093 .muxsel = { 2, 3, 1, 1},
1094 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
1095 .pll = PLL_28,
1096 .tuner_type = 5,
1097},{
1098 /* This is the ultimate cheapo capture card
1099 * just a BT848A on a small PCB!
1100 * Steve Hosgood <steve@equiinet.com> */
1101 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1102 .video_inputs = 2,
1103 .audio_inputs = 0,
1104 .tuner = -1,
1105 .svhs = 1,
1106 .gpiomask = 0,
1107 .muxsel = { 3, 1 },
1108 .audiomux = { 0 },
1109 .needs_tvaudio = 0,
1110 .no_msp34xx = 1,
1111 .pll = PLL_35,
1112 .tuner_type = -1,
1113},{
1114 /* Daniel Herrington <daniel.herrington@home.com> */
1115 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1116 .video_inputs = 3,
1117 .audio_inputs = 1,
1118 .tuner = 0,
1119 .svhs = 2,
1120 .gpiomask = 0xe00,
1121 .muxsel = { 2, 3, 1, 1},
1122 .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
1123 .needs_tvaudio = 1,
1124 .pll = PLL_28,
1125 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1126},{
1127 /* Matti Mottus <mottus@physic.ut.ee> */
1128 .name = "Askey CPH03x TV Capturer",
1129 .video_inputs = 4,
1130 .audio_inputs = 1,
1131 .tuner = 0,
1132 .svhs = 2,
1133 .gpiomask = 0x03000F,
1134 .muxsel = { 2, 3, 1, 0},
1135 .audiomux = { 2,0,0,0,1 },
1136 .pll = PLL_28,
1137 .tuner_type = 0,
1138},{
1139
1140/* ---- card 0x3c ---------------------------------- */
1141 /* Philip Blundell <philb@gnu.org> */
1142 .name = "Modular Technology MM100PCTV",
1143 .video_inputs = 2,
1144 .audio_inputs = 2,
1145 .tuner = 0,
1146 .svhs = -1,
1147 .gpiomask = 11,
1148 .muxsel = { 2, 3, 1, 1},
1149 .audiomux = { 2, 0, 0, 1, 8},
1150 .pll = PLL_35,
1151 .tuner_type = TUNER_TEMIC_PAL,
1152
1153},{
1154 /* Adrian Cox <adrian@humboldt.co.uk */
1155 .name = "AG Electronics GMV1",
1156 .video_inputs = 2,
1157 .audio_inputs = 0,
1158 .tuner = -1,
1159 .svhs = 1,
1160 .gpiomask = 0xF,
1161 .muxsel = { 2, 2},
1162 .audiomux = { },
1163 .no_msp34xx = 1,
1164 .needs_tvaudio = 0,
1165 .pll = PLL_28,
1166 .tuner_type = -1,
1167},{
1168 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1169 new Easy TV BT878 version (model CPH061)
1170 special thanks to Informatica Mieres for providing the card */
1171 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1172 .video_inputs = 3,
1173 .audio_inputs = 2,
1174 .tuner = 0,
1175 .svhs = 2,
1176 .gpiomask = 0xFF,
1177 .muxsel = { 2, 3, 1, 0},
1178 .audiomux = { 1, 0, 4, 4, 9},
1179 .needs_tvaudio = 0,
1180 .pll = PLL_28,
1181 .tuner_type = TUNER_PHILIPS_PAL,
1182},{
1183 /* Lukas Gebauer <geby@volny.cz> */
1184 .name = "ATI TV-Wonder",
1185 .video_inputs = 3,
1186 .audio_inputs = 1,
1187 .tuner = 0,
1188 .svhs = 2,
1189 .gpiomask = 0xf03f,
1190 .muxsel = { 2, 3, 1, 0 },
1191 .audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
1192 .pll = PLL_28,
1193 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1194},{
1195
1196/* ---- card 0x40 ---------------------------------- */
1197 /* Lukas Gebauer <geby@volny.cz> */
1198 .name = "ATI TV-Wonder VE",
1199 .video_inputs = 2,
1200 .audio_inputs = 1,
1201 .tuner = 0,
1202 .svhs = -1,
1203 .gpiomask = 1,
1204 .muxsel = { 2, 3, 0, 1},
1205 .audiomux = { 0, 0, 1, 0, 0},
1206 .no_msp34xx = 1,
1207 .pll = PLL_28,
1208 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1209},{
1210 /* DeeJay <deejay@westel900.net (2000S) */
1211 .name = "Lifeview FlyVideo 2000S LR90",
1212 .video_inputs = 3,
1213 .audio_inputs = 3,
1214 .tuner = 0,
1215 .svhs = 2,
1216 .gpiomask = 0x18e0,
1217 .muxsel = { 2, 3, 0, 1},
1218 /* Radio changed from 1e80 to 0x800 to make
1219 FlyVideo2000S in .hu happy (gm)*/
1220 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1221 .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
1222 .audio_hook = fv2000s_audio,
1223 .no_msp34xx = 1,
1224 .no_tda9875 = 1,
1225 .needs_tvaudio = 1,
1226 .pll = PLL_28,
1227 .tuner_type = 5,
1228},{
1229 .name = "Terratec TValueRadio",
1230 .video_inputs = 3,
1231 .audio_inputs = 1,
1232 .tuner = 0,
1233 .svhs = 2,
1234 .gpiomask = 0xffff00,
1235 .muxsel = { 2, 3, 1, 1},
1236 .audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900},
1237 .needs_tvaudio = 1,
1238 .pll = PLL_28,
1239 .tuner_type = TUNER_PHILIPS_PAL,
1240 .has_radio = 1,
1241},{
1242 /* TANAKA Kei <peg00625@nifty.com> */
1243 .name = "IODATA GV-BCTV4/PCI",
1244 .video_inputs = 3,
1245 .audio_inputs = 1,
1246 .tuner = 0,
1247 .svhs = 2,
1248 .gpiomask = 0x010f00,
1249 .muxsel = {2, 3, 0, 0},
1250 .audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
1251 .no_msp34xx = 1,
1252 .pll = PLL_28,
1253 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1254 .audio_hook = gvbctv3pci_audio,
1255},{
1256
1257/* ---- card 0x44 ---------------------------------- */
1258 .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1259 // try "insmod msp3400 simple=0" if you have
1260 // sound problems with this card.
1261 .video_inputs = 4,
1262 .audio_inputs = 1,
1263 .tuner = 0,
1264 .svhs = -1,
1265 .gpiomask = 0x4f8a00,
1266 // 0x100000: 1=MSP enabled (0=disable again)
1267 // 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
1268 .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
1269 // tvtuner, radio, external,internal, mute, stereo
1270 /* tuner, Composit, SVid, Composit-on-Svid-adapter*/
1271 .muxsel = { 2, 3 ,0 ,1},
1272 .tuner_type = TUNER_MT2032,
1273 .pll = PLL_28,
1274 .has_radio = 1,
1275},{
1276 /* Philip Blundell <pb@nexus.co.uk> */
1277 .name = "Active Imaging AIMMS",
1278 .video_inputs = 1,
1279 .audio_inputs = 0,
1280 .tuner = -1,
1281 .tuner_type = -1,
1282 .pll = PLL_28,
1283 .muxsel = { 2 },
1284 .gpiomask = 0
1285},{
1286 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1287 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1288 .video_inputs = 3,
1289 .audio_inputs = 4,
1290 .tuner = 0,
1291 .svhs = 2,
1292 .gpiomask = 15,
1293 .muxsel = { 2, 3, 1, 1},
1294 .audiomux = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO !
1295 .needs_tvaudio = 1,
1296 .pll = PLL_28,
1297 .tuner_type = 25,
1298 .has_remote = 1,
1299 /* GPIO wiring:
1300 GPIO0: U4.A0 (hef4052bt)
1301 GPIO1: U4.A1
1302 GPIO2: U4.A1 (second hef4052bt)
1303 GPIO3: U4.nEN, U5.A0, A5.nEN
1304 GPIO8-15: vrd866b ?
1305 */
1306},{
1307 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1308 .video_inputs = 4,
1309 .audio_inputs = 0,
1310 .tuner = -1,
1311 .svhs = 2,
1312 .muxsel = { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
1313 .pll = PLL_28,
1314 .no_msp34xx = 1,
1315},{
1316
1317/* ---- card 0x48 ---------------------------------- */
1318 /* Dariusz Kowalewski <darekk@automex.pl> */
1319 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1320 .video_inputs = 4,
1321 .audio_inputs = 1,
1322 .tuner = 0,
1323 .svhs = 2,
1324 .gpiomask = 0x3f,
1325 .muxsel = { 2, 3, 1, 1 },
1326 .audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
1327 .needs_tvaudio = 1,
1328 .no_msp34xx = 1,
1329 .no_tda9875 = 1,
1330 .pll = PLL_28,
1331 .tuner_type = 5,
1332 .audio_hook = pvbt878p9b_audio, // Note: not all cards have stereo
1333 .has_radio = 1, // Note: not all cards have radio
1334 .has_remote = 1,
1335 /* GPIO wiring:
1336 GPIO0: A0 hef4052
1337 GPIO1: A1 hef4052
1338 GPIO3: nEN hef4052
1339 GPIO8-15: vrd866b
1340 GPIO20,22,23: R30,R29,R28
1341 */
1342},{
1343 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1344 /* you must jumper JP5 for the card to work */
1345 .name = "Sensoray 311",
1346 .video_inputs = 5,
1347 .audio_inputs = 0,
1348 .tuner = -1,
1349 .svhs = 4,
1350 .gpiomask = 0,
1351 .muxsel = { 2, 3, 1, 0, 0},
1352 .audiomux = { 0 },
1353 .needs_tvaudio = 0,
1354 .tuner_type = -1,
1355},{
1356 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1357 .name = "RemoteVision MX (RV605)",
1358 .video_inputs = 16,
1359 .audio_inputs = 0,
1360 .tuner = -1,
1361 .svhs = -1,
1362 .gpiomask = 0x00,
1363 .gpiomask2 = 0x07ff,
1364 .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1365 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1366 .no_msp34xx = 1,
1367 .no_tda9875 = 1,
1368 .tuner_type = -1,
1369 .muxsel_hook = rv605_muxsel,
1370},{
1371 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1372 .video_inputs = 3,
1373 .audio_inputs = 2,
1374 .tuner = 0,
1375 .svhs = 2,
1376 .gpiomask = 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
1377 .muxsel = { 2, 1, 1, },
1378 .audiomux = { 0, 1, 2, 2, 4 },
1379 .needs_tvaudio = 0,
1380 .tuner_type = TUNER_PHILIPS_PAL,
1381 .pll = PLL_28,
1382 .has_radio = 1,
1383},{
1384
1385/* ---- card 0x4c ---------------------------------- */
1386 /* Masaki Suzuki <masaki@btree.org> */
1387 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1388 .video_inputs = 3,
1389 .audio_inputs = 1,
1390 .tuner = 0,
1391 .svhs = 2,
1392 .gpiomask = 0x140007,
1393 .muxsel = { 2, 3, 1, 1 },
1394 .audiomux = { 0, 1, 2, 3, 4, 0 },
1395 .tuner_type = TUNER_PHILIPS_NTSC,
1396 .audio_hook = windvr_audio,
1397},{
1398 .name = "GrandTec Multi Capture Card (Bt878)",
1399 .video_inputs = 4,
1400 .audio_inputs = 0,
1401 .tuner = -1,
1402 .svhs = -1,
1403 .gpiomask = 0,
1404 .muxsel = { 2, 3, 1, 0 },
1405 .audiomux = { 0 },
1406 .needs_tvaudio = 0,
1407 .no_msp34xx = 1,
1408 .pll = PLL_28,
1409 .tuner_type = -1,
1410},{
1411 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1412 .video_inputs = 4,
1413 .audio_inputs = 3,
1414 .tuner = 0,
1415 .svhs = 2,
1416 .gpiomask = 7,
1417 .muxsel = { 2, 3, 1, 1 }, // Tuner, SVid, SVHS, SVid to SVHS connector
1418 .audiomux = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio!
1419 // This card lacks external Audio In, so we mute it on Ext. & Int.
1420 // The PCB can take a sbx1637/sbx1673, wiring unknown.
1421 // This card lacks PCI subsystem ID, sigh.
1422 // audiomux=1: lower volume, 2+3: mute
1423 // btwincap uses 0x80000/0x80003
1424 .needs_tvaudio = 0,
1425 .no_msp34xx = 1,
1426 .pll = PLL_28,
1427 .tuner_type = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1428 // radio signal strength indicators work fine.
1429 .has_radio = 1,
1430 /* GPIO Info:
1431 GPIO0,1: HEF4052 A0,A1
1432 GPIO2: HEF4052 nENABLE
1433 GPIO3-7: n.c.
1434 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1435 GPIO14,15: ??
1436 GPIO16-21: n.c.
1437 GPIO22,23: ??
1438 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1439},{
1440 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1441 .name = "DSP Design TCVIDEO",
1442 .video_inputs = 4,
1443 .svhs = -1,
1444 .muxsel = { 2, 3, 1, 0},
1445 .pll = PLL_28,
1446 .tuner_type = -1,
1447},{
1448
1449 /* ---- card 0x50 ---------------------------------- */
1450 .name = "Hauppauge WinTV PVR",
1451 .video_inputs = 4,
1452 .audio_inputs = 1,
1453 .tuner = 0,
1454 .svhs = 2,
1455 .muxsel = { 2, 0, 1, 1},
1456 .needs_tvaudio = 1,
1457 .pll = PLL_28,
1458 .tuner_type = -1,
1459
1460 .gpiomask = 7,
1461 .audiomux = {7},
1462},{
1463 .name = "IODATA GV-BCTV5/PCI",
1464 .video_inputs = 3,
1465 .audio_inputs = 1,
1466 .tuner = 0,
1467 .svhs = 2,
1468 .gpiomask = 0x0f0f80,
1469 .muxsel = {2, 3, 1, 0},
1470 .audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0},
1471 .no_msp34xx = 1,
1472 .pll = PLL_28,
1473 .tuner_type = TUNER_PHILIPS_NTSC_M,
1474 .audio_hook = gvbctv5pci_audio,
1475 .has_radio = 1,
1476},{
1477 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1478 .video_inputs = 4, /* id-inputs-clock */
1479 .audio_inputs = 0,
1480 .tuner = -1,
1481 .svhs = 3,
1482 .muxsel = { 3, 2, 0, 1 },
1483 .pll = PLL_28,
1484 .tuner_type = -1,
1485 .no_msp34xx = 1,
1486 .no_tda9875 = 1,
1487 .no_tda7432 = 1,
1488},{
1489 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1490 .video_inputs = 3,
1491 .audio_inputs = 0,
1492 .tuner = -1,
1493 .svhs = 2,
1494 .muxsel = { 2, 3, 1 },
1495 .pll = PLL_28,
1496 .tuner_type = -1,
1497 .no_msp34xx = 1,
1498 .no_tda9875 = 1,
1499 .no_tda7432 = 1,
1500},{
1501
1502 /* ---- card 0x54 ---------------------------------- */
1503 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1504 .video_inputs = 2,
1505 .audio_inputs = 0,
1506 .tuner = -1,
1507 .svhs = 1,
1508 .muxsel = { 3, 1 },
1509 .pll = PLL_28,
1510 .tuner_type = -1,
1511 .no_msp34xx = 1,
1512 .no_tda9875 = 1,
1513 .no_tda7432 = 1,
1514},{
1515 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1516 .video_inputs = 1,
1517 .audio_inputs = 0,
1518 .tuner = -1,
1519 .svhs = -1,
1520 .muxsel = { 0 },
1521 .pll = PLL_28,
1522 .tuner_type = -1,
1523 .no_msp34xx = 1,
1524 .no_tda9875 = 1,
1525 .no_tda7432 = 1,
1526},{
1527 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1528 .video_inputs = 2,
1529 .audio_inputs = 0,
1530 .tuner = -1,
1531 .svhs = 1,
1532 .muxsel = { 0, 1 },
1533 .pll = PLL_28,
1534 .tuner_type = -1,
1535 .no_msp34xx = 1,
1536 .no_tda9875 = 1,
1537 .no_tda7432 = 1,
1538},{
1539 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1540 .video_inputs = 1,
1541 .audio_inputs = 1,
1542 .tuner = -1,
1543 .svhs = -1,
1544 .muxsel = { 0 },
1545 .pll = PLL_28,
1546 .tuner_type = -1,
1547 .no_msp34xx = 1,
1548 .no_tda9875 = 1,
1549 .no_tda7432 = 1,
1550},{
1551
1552 /* ---- card 0x58 ---------------------------------- */
1553 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1554 .video_inputs = 2,
1555 .audio_inputs = 1,
1556 .tuner = -1,
1557 .svhs = 1,
1558 .muxsel = { 0, 1 },
1559 .pll = PLL_28,
1560 .tuner_type = -1,
1561 .no_msp34xx = 1,
1562 .no_tda9875 = 1,
1563 .no_tda7432 = 1,
1564},{
1565 .name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
1566 .video_inputs = 2,
1567 .audio_inputs = 1,
1568 .tuner = -1,
1569 .svhs = 1,
1570 .muxsel = { 2, 3 },
1571 .pll = PLL_28,
1572 .tuner_type = -1,
1573 .no_msp34xx = 1,
1574 .no_tda9875 = 1,
1575 .no_tda7432 = 1,
1576},{
1577 .name = "Osprey 500", /* 500 */
1578 .video_inputs = 2,
1579 .audio_inputs = 1,
1580 .tuner = -1,
1581 .svhs = 1,
1582 .muxsel = { 2, 3 },
1583 .pll = PLL_28,
1584 .tuner_type = -1,
1585 .no_msp34xx = 1,
1586 .no_tda9875 = 1,
1587 .no_tda7432 = 1,
1588},{
1589 .name = "Osprey 540", /* 540 */
1590 .video_inputs = 4,
1591 .audio_inputs = 1,
1592 .tuner = -1,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]1593 .pll = PLL_28,
1594 .tuner_type = -1,
1595 .no_msp34xx = 1,
1596 .no_tda9875 = 1,
1597 .no_tda7432 = 1,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]1598},{
1599
1600 /* ---- card 0x5C ---------------------------------- */
1601 .name = "Osprey 2000", /* 2000 */
1602 .video_inputs = 2,
1603 .audio_inputs = 1,
1604 .tuner = -1,
1605 .svhs = 1,
1606 .muxsel = { 2, 3 },
1607 .pll = PLL_28,
1608 .tuner_type = -1,
1609 .no_msp34xx = 1,
1610 .no_tda9875 = 1,
1611 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1612},{
1613 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1614 .name = "IDS Eagle",
1615 .video_inputs = 4,
1616 .audio_inputs = 0,
1617 .tuner = -1,
1618 .tuner_type = -1,
1619 .svhs = -1,
1620 .gpiomask = 0,
1621 .muxsel = { 0, 1, 2, 3 },
1622 .muxsel_hook = eagle_muxsel,
1623 .no_msp34xx = 1,
1624 .no_tda9875 = 1,
1625 .pll = PLL_28,
1626},{
1627 .name = "Pinnacle PCTV Sat",
1628 .video_inputs = 2,
1629 .audio_inputs = 0,
1630 .svhs = 1,
1631 .tuner = -1,
1632 .tuner_type = -1,
1633 .no_msp34xx = 1,
1634 .no_tda9875 = 1,
1635 .no_tda7432 = 1,
1636 .gpiomask = 0x01,
1637 .audiomux = { 0, 0, 0, 0, 1 },
1638 .muxsel = { 3, 0, 1, 2},
1639 .needs_tvaudio = 0,
1640 .pll = PLL_28,
1641 .no_gpioirq = 1,
1642 .has_dvb = 1,
1643},{
1644 .name = "Formac ProTV II (bt878)",
1645 .video_inputs = 4,
1646 .audio_inputs = 1,
1647 .tuner = 0,
1648 .svhs = 3,
1649 .gpiomask = 2,
1650 // TV, Comp1, Composite over SVID con, SVID
1651 .muxsel = { 2, 3, 1, 1},
1652 .audiomux = { 2, 2, 0, 0, 0 },
1653 .pll = PLL_28,
1654 .has_radio = 1,
1655 .tuner_type = TUNER_PHILIPS_PAL,
1656 /* sound routing:
1657 GPIO=0x00,0x01,0x03: mute (?)
1658 0x02: both TV and radio (tuner: FM1216/I)
1659 The card has onboard audio connectors labeled "cdrom" and "board",
1660 not soldered here, though unknown wiring.
1661 Card lacks: external audio in, pci subsystem id.
1662 */
1663},{
1664
1665 /* ---- card 0x60 ---------------------------------- */
1666 .name = "MachTV",
1667 .video_inputs = 3,
1668 .audio_inputs = 1,
1669 .tuner = 0,
1670 .svhs = -1,
1671 .gpiomask = 7,
1672 .muxsel = { 2, 3, 1, 1},
1673 .audiomux = { 0, 1, 2, 3, 4},
1674 .needs_tvaudio = 1,
1675 .tuner_type = 5,
1676 .pll = 1,
1677},{
1678 .name = "Euresys Picolo",
1679 .video_inputs = 3,
1680 .audio_inputs = 0,
1681 .tuner = -1,
1682 .svhs = 2,
1683 .gpiomask = 0,
1684 .no_msp34xx = 1,
1685 .no_tda9875 = 1,
1686 .no_tda7432 = 1,
1687 .muxsel = { 2, 0, 1},
1688 .pll = PLL_28,
1689},{
1690 /* Luc Van Hoeylandt <luc@e-magic.be> */
1691 .name = "ProVideo PV150", /* 0x4f */
1692 .video_inputs = 2,
1693 .audio_inputs = 0,
1694 .tuner = -1,
1695 .svhs = -1,
1696 .gpiomask = 0,
1697 .muxsel = { 2, 3 },
1698 .audiomux = { 0 },
1699 .needs_tvaudio = 0,
1700 .no_msp34xx = 1,
1701 .pll = PLL_28,
1702 .tuner_type = -1,
1703},{
1704 /* Hiroshi Takekawa <sian@big.or.jp> */
1705 /* This card lacks subsystem ID */
1706 .name = "AD-TVK503", /* 0x63 */
1707 .video_inputs = 4,
1708 .audio_inputs = 1,
1709 .tuner = 0,
1710 .svhs = 2,
1711 .gpiomask = 0x001e8007,
1712 .muxsel = { 2, 3, 1, 0 },
1713 /* Tuner, Radio, external, internal, off, on */
1714 .audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
1715 .needs_tvaudio = 0,
1716 .no_msp34xx = 1,
1717 .pll = PLL_28,
1718 .tuner_type = 2,
1719 .audio_hook = adtvk503_audio,
1720},{
1721
1722 /* ---- card 0x64 ---------------------------------- */
1723 .name = "Hercules Smart TV Stereo",
1724 .video_inputs = 4,
1725 .audio_inputs = 1,
1726 .tuner = 0,
1727 .svhs = 2,
1728 .gpiomask = 0x00,
1729 .muxsel = { 2, 3, 1, 1 },
1730 .needs_tvaudio = 1,
1731 .no_msp34xx = 1,
1732 .pll = PLL_28,
1733 .tuner_type = 5,
1734 /* Notes:
1735 - card lacks subsystem ID
1736 - stereo variant w/ daughter board with tda9874a @0xb0
1737 - Audio Routing:
1738 always from tda9874 independent of GPIO (?)
1739 external line in: unknown
1740 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1741 hef4053 (instead 4052) for unknown function
1742 */
1743},{
1744 .name = "Pace TV & Radio Card",
1745 .video_inputs = 4,
1746 .audio_inputs = 1,
1747 .tuner = 0,
1748 .svhs = 2,
1749 .muxsel = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector
1750 .gpiomask = 0,
1751 .no_tda9875 = 1,
1752 .no_tda7432 = 1,
1753 .tuner_type = 1,
1754 .has_radio = 1,
1755 .pll = PLL_28,
1756 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1757 only internal line out: (4pin header) RGGL
1758 Radio must be decoded by msp3410d (not routed through)*/
1759 // .digital_mode = DIGITAL_MODE_CAMERA, // todo!
1760},{
1761 /* Chris Willing <chris@vislab.usyd.edu.au> */
1762 .name = "IVC-200",
1763 .video_inputs = 1,
1764 .audio_inputs = 0,
1765 .tuner = -1,
1766 .tuner_type = -1,
1767 .svhs = -1,
1768 .gpiomask = 0xdf,
1769 .muxsel = { 2 },
1770 .pll = PLL_28,
1771},{
1772 .name = "Grand X-Guard / Trust 814PCI",
1773 .video_inputs = 16,
1774 .audio_inputs = 0,
1775 .tuner = -1,
1776 .svhs = -1,
1777 .tuner_type = 4,
1778 .gpiomask2 = 0xff,
1779 .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
1780 .muxsel_hook = xguard_muxsel,
1781 .no_msp34xx = 1,
1782 .no_tda9875 = 1,
1783 .no_tda7432 = 1,
1784 .pll = PLL_28,
1785},{
1786
1787 /* ---- card 0x68 ---------------------------------- */
1788 .name = "Nebula Electronics DigiTV",
1789 .video_inputs = 1,
1790 .tuner = -1,
1791 .svhs = -1,
1792 .muxsel = { 2, 3, 1, 0},
1793 .no_msp34xx = 1,
1794 .no_tda9875 = 1,
1795 .no_tda7432 = 1,
1796 .pll = PLL_28,
1797 .tuner_type = -1,
1798 .has_dvb = 1,
1799 .no_gpioirq = 1,
1800},{
1801 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1802 .name = "ProVideo PV143",
1803 .video_inputs = 4,
1804 .audio_inputs = 0,
1805 .tuner = -1,
1806 .svhs = -1,
1807 .gpiomask = 0,
1808 .muxsel = { 2, 3, 1, 0 },
1809 .audiomux = { 0 },
1810 .needs_tvaudio = 0,
1811 .no_msp34xx = 1,
1812 .pll = PLL_28,
1813 .tuner_type = -1,
1814},{
1815 /* M.Klahr@phytec.de */
1816 .name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
1817 .video_inputs = 4,
1818 .audio_inputs = 0,
1819 .tuner = -1, /* card has no tuner */
1820 .svhs = 3,
1821 .gpiomask = 0x00,
1822 .muxsel = { 2, 3, 1, 0},
1823 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1824 .needs_tvaudio = 1,
1825 .pll = PLL_28,
1826 .tuner_type = -1,
1827},{
1828 .name = "PHYTEC VD-009-X1 Combi (bt878)",
1829 .video_inputs = 4,
1830 .audio_inputs = 0,
1831 .tuner = -1, /* card has no tuner */
1832 .svhs = 3,
1833 .gpiomask = 0x00,
1834 .muxsel = { 2, 3, 1, 1},
1835 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1836 .needs_tvaudio = 1,
1837 .pll = PLL_28,
1838 .tuner_type = -1,
1839},{
1840
1841 /* ---- card 0x6c ---------------------------------- */
1842 .name = "PHYTEC VD-009 MiniDIN (bt878)",
1843 .video_inputs = 10,
1844 .audio_inputs = 0,
1845 .tuner = -1, /* card has no tuner */
1846 .svhs = 9,
1847 .gpiomask = 0x00,
1848 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
1849 via the upper nibble of muxsel. here: used for
1850 xternal video-mux */
1851 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
1852 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1853 .needs_tvaudio = 1,
1854 .pll = PLL_28,
1855 .tuner_type = -1,
1856},{
1857 .name = "PHYTEC VD-009 Combi (bt878)",
1858 .video_inputs = 10,
1859 .audio_inputs = 0,
1860 .tuner = -1, /* card has no tuner */
1861 .svhs = 9,
1862 .gpiomask = 0x00,
1863 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
1864 via the upper nibble of muxsel. here: used for
1865 xternal video-mux */
1866 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
1867 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1868 .needs_tvaudio = 1,
1869 .pll = PLL_28,
1870 .tuner_type = -1,
1871},{
1872 .name = "IVC-100",
1873 .video_inputs = 4,
1874 .audio_inputs = 0,
1875 .tuner = -1,
1876 .tuner_type = -1,
1877 .svhs = -1,
1878 .gpiomask = 0xdf,
1879 .muxsel = { 2, 3, 1, 0 },
1880 .pll = PLL_28,
1881},{
1882 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
1883 .name = "IVC-120G",
1884 .video_inputs = 16,
1885 .audio_inputs = 0, /* card has no audio */
1886 .tuner = -1, /* card has no tuner */
1887 .tuner_type = -1,
1888 .svhs = -1, /* card has no svhs */
1889 .needs_tvaudio = 0,
1890 .no_msp34xx = 1,
1891 .no_tda9875 = 1,
1892 .no_tda7432 = 1,
1893 .gpiomask = 0x00,
1894 .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
1895 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
1896 .muxsel_hook = ivc120_muxsel,
1897 .pll = PLL_28,
1898},{
1899
1900 /* ---- card 0x70 ---------------------------------- */
1901 .name = "pcHDTV HD-2000 TV",
1902 .video_inputs = 4,
1903 .audio_inputs = 1,
1904 .tuner = 0,
1905 .svhs = 2,
1906 .muxsel = { 2, 3, 1, 0},
1907 .tuner_type = TUNER_PHILIPS_ATSC,
1908 .has_dvb = 1,
1909},{
1910 .name = "Twinhan DST + clones",
1911 .no_msp34xx = 1,
1912 .no_tda9875 = 1,
1913 .no_tda7432 = 1,
1914 .tuner_type = TUNER_ABSENT,
1915 .no_video = 1,
1916 .has_dvb = 1,
1917},{
1918 .name = "Winfast VC100",
1919 .video_inputs = 3,
1920 .audio_inputs = 0,
1921 .svhs = 1,
1922 .tuner = -1, // no tuner
1923 .muxsel = { 3, 1, 1, 3}, // Vid In, SVid In, Vid over SVid in connector
1924 .no_msp34xx = 1,
1925 .no_tda9875 = 1,
1926 .no_tda7432 = 1,
1927 .tuner_type = TUNER_ABSENT,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]1928 .pll = PLL_28,
1929},{
1930 .name = "Teppro TEV-560/InterVision IV-560",
1931 .video_inputs = 3,
1932 .audio_inputs = 1,
1933 .tuner = 0,
1934 .svhs = 2,
1935 .gpiomask = 3,
1936 .muxsel = { 2, 3, 1, 1},
1937 .audiomux = { 1, 1, 1, 1, 0},
1938 .needs_tvaudio = 1,
1939 .tuner_type = TUNER_PHILIPS_PAL,
1940 .pll = PLL_35,
1941},{
1942
1943 /* ---- card 0x74 ---------------------------------- */
1944 .name = "SIMUS GVC1100",
1945 .video_inputs = 4,
1946 .audio_inputs = 0,
1947 .tuner = -1,
1948 .svhs = -1,
1949 .tuner_type = -1,
1950 .pll = PLL_28,
1951 .muxsel = { 2, 2, 2, 2},
1952 .gpiomask = 0x3F,
1953 .muxsel_hook = gvc1100_muxsel,
1954},{
1955 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
1956 .name = "NGS NGSTV+",
1957 .video_inputs = 3,
1958 .tuner = 0,
1959 .svhs = 2,
1960 .gpiomask = 0x008007,
1961 .muxsel = {2, 3, 0, 0},
1962 .audiomux = {0, 0, 0, 0, 0x000003, 0},
1963 .pll = PLL_28,
1964 .tuner_type = TUNER_PHILIPS_PAL,
1965 .has_remote = 1,
1966},{
1967 /* http://linuxmedialabs.com */
1968 .name = "LMLBT4",
1969 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
1970 .audio_inputs = 0,
1971 .tuner = -1,
1972 .svhs = -1,
1973 .muxsel = { 2, 3, 1, 0 },
1974 .no_msp34xx = 1,
1975 .no_tda9875 = 1,
1976 .no_tda7432 = 1,
1977 .needs_tvaudio = 0,
1978},{
1979 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
1980 .name = "Tekram M205 PRO",
1981 .video_inputs = 3,
1982 .audio_inputs = 1,
1983 .tuner = 0,
1984 .tuner_type = TUNER_PHILIPS_PAL,
1985 .svhs = 2,
1986 .needs_tvaudio = 0,
1987 .gpiomask = 0x68,
1988 .muxsel = { 2, 3, 1},
1989 .audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 },
1990 .pll = PLL_28,
1991},{
1992
1993 /* ---- card 0x78 ---------------------------------- */
1994 /* Javier Cendan Ares <jcendan@lycos.es> */
1995 /* bt878 TV + FM without subsystem ID */
1996 .name = "Conceptronic CONTVFMi",
1997 .video_inputs = 3,
1998 .audio_inputs = 1,
1999 .tuner = 0,
2000 .svhs = 2,
2001 .gpiomask = 0x008007,
2002 .muxsel = { 2, 3, 1, 1 },
2003 .audiomux = { 0, 1, 2, 2, 3 },
2004 .needs_tvaudio = 0,
2005 .pll = PLL_28,
2006 .tuner_type = TUNER_PHILIPS_PAL,
2007 .has_remote = 1,
2008 .has_radio = 1,
2009},{
2010 /*Eric DEBIEF <debief@telemsa.com>*/
2011 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2012 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_PICOLO_TETRA_CHIP*/
2013 /*0x79 in bttv.h*/
2014 .name = "Euresys Picolo Tetra",
2015 .video_inputs = 4,
2016 .audio_inputs = 0,
2017 .tuner = -1,
2018 .svhs = -1,
2019 .gpiomask = 0,
2020 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2021 .no_msp34xx = 1,
2022 .no_tda9875 = 1,
2023 .no_tda7432 = 1,
2024 .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
2025 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2026 .pll = PLL_28,
2027 .needs_tvaudio = 0,
2028 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2029},{
2030 /* Spirit TV Tuner from http://spiritmodems.com.au */
2031 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2032 .name = "Spirit TV Tuner",
2033 .video_inputs = 3,
2034 .audio_inputs = 1,
2035 .tuner = 0,
2036 .svhs = 2,
2037 .gpiomask = 0x0000000f,
2038 .muxsel = { 2, 1, 1 },
2039 .audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00},
2040 .tuner_type = TUNER_TEMIC_PAL,
2041 .no_msp34xx = 1,
2042 .no_tda9875 = 1,
2043},{
2044 /* Wolfram Joost <wojo@frokaschwei.de> */
2045 .name = "AVerMedia AVerTV DVB-T 771",
2046 .video_inputs = 2,
2047 .svhs = 1,
2048 .tuner = -1,
2049 .tuner_type = TUNER_ABSENT,
2050 .muxsel = { 3 , 3 },
2051 .no_msp34xx = 1,
2052 .no_tda9875 = 1,
2053 .no_tda7432 = 1,
2054 .pll = PLL_28,
2055 .has_dvb = 1,
2056 .no_gpioirq = 1,
2057 .has_remote = 1,
2058},{
2059 /* ---- card 0x7c ---------------------------------- */
2060 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2061 /* Based on the Nebula card data - added remote and new card number - BTTV_AVDVBT_761, see also ir-kbd-gpio.c */
2062 .name = "AverMedia AverTV DVB-T 761",
2063 .video_inputs = 2,
2064 .tuner = -1,
2065 .svhs = 1,
2066 .muxsel = { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
2067 .no_msp34xx = 1,
2068 .no_tda9875 = 1,
2069 .no_tda7432 = 1,
2070 .pll = PLL_28,
2071 .tuner_type = -1,
2072 .has_dvb = 1,
2073 .no_gpioirq = 1,
2074 .has_remote = 1,
2075},{
2076 /* andre.schwarz@matrix-vision.de */
2077 .name = "MATRIX Vision Sigma-SQ",
2078 .video_inputs = 16,
2079 .audio_inputs = 0,
2080 .tuner = -1,
2081 .svhs = -1,
2082 .gpiomask = 0x0,
2083 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
2084 3, 3, 3, 3, 3, 3, 3, 3 },
2085 .muxsel_hook = sigmaSQ_muxsel,
2086 .audiomux = { 0 },
2087 .no_msp34xx = 1,
2088 .pll = PLL_28,
2089 .tuner_type = -1,
2090},{
2091 /* andre.schwarz@matrix-vision.de */
2092 .name = "MATRIX Vision Sigma-SLC",
2093 .video_inputs = 4,
2094 .audio_inputs = 0,
2095 .tuner = -1,
2096 .svhs = -1,
2097 .gpiomask = 0x0,
2098 .muxsel = { 2, 2, 2, 2 },
2099 .muxsel_hook = sigmaSLC_muxsel,
2100 .audiomux = { 0 },
2101 .no_msp34xx = 1,
2102 .pll = PLL_28,
2103 .tuner_type = -1,
2104},{
2105 /* BTTV_APAC_VIEWCOMP */
2106 /* Attila Kondoros <attila.kondoros@chello.hu> */
2107 /* bt878 TV + FM 0x00000000 subsystem ID */
2108 .name = "APAC Viewcomp 878(AMAX)",
2109 .video_inputs = 2,
2110 .audio_inputs = 1,
2111 .tuner = 0,
2112 .svhs = -1,
2113 .gpiomask = 0xFF,
2114 .muxsel = { 2, 3, 1, 1},
2115 .audiomux = { 2, 0, 0, 0, 10},
2116 .needs_tvaudio = 0,
2117 .pll = PLL_28,
2118 .tuner_type = TUNER_PHILIPS_PAL,
2119 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2120 .has_radio = 1, /* not every card has radio */
2121},{
2122
2123 /* ---- card 0x80 ---------------------------------- */
2124 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2125 .name = "DVICO FusionHDTV DVB-T Lite",
2126 .tuner = -1,
2127 .no_msp34xx = 1,
2128 .no_tda9875 = 1,
2129 .no_tda7432 = 1,
2130 .pll = PLL_28,
2131 .no_video = 1,
2132 .has_dvb = 1,
2133 .tuner_type = -1,
2134},{
2135 /* Steven <photon38@pchome.com.tw> */
2136 .name = "V-Gear MyVCD",
2137 .video_inputs = 3,
2138 .audio_inputs = 1,
2139 .tuner = 0,
2140 .svhs = 2,
2141 .gpiomask = 0x3f,
2142 .muxsel = {2, 3, 1, 0},
2143 .audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
2144 .no_msp34xx = 1,
2145 .pll = PLL_28,
2146 .tuner_type = TUNER_PHILIPS_NTSC_M,
2147 .has_radio = 0,
2148 // .has_remote = 1,
2149},{
2150 /* Rick C <cryptdragoon@gmail.com> */
2151 .name = "Super TV Tuner",
2152 .video_inputs = 4,
2153 .audio_inputs = 1,
2154 .tuner = 0,
2155 .svhs = 2,
2156 .muxsel = { 2, 3, 1, 0},
2157 .tuner_type = TUNER_PHILIPS_NTSC,
2158 .gpiomask = 0x008007,
2159 .audiomux = { 0, 0x000001,0,0, 0},
2160 .needs_tvaudio = 1,
2161 .has_radio = 1,
2162},{
2163 /* Chris Fanning <video4linux@haydon.net> */
2164 .name = "Tibet Systems 'Progress DVR' CS16",
2165 .video_inputs = 16,
2166 .audio_inputs = 0,
2167 .tuner = -1,
2168 .svhs = -1,
2169 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2170 .pll = PLL_28,
2171 .no_msp34xx = 1,
2172 .no_tda9875 = 1,
2173 .no_tda7432 = 1,
2174 .tuner_type = -1,
2175 .muxsel_hook = tibetCS16_muxsel,
2176},
2177{
2178 /* Bill Brack <wbrack@mmm.com.hk> */
2179 /*
2180 * Note that, because of the card's wiring, the "master"
2181 * BT878A chip (i.e. the one which controls the analog switch
2182 * and must use this card type) is the 2nd one detected. The
2183 * other 3 chips should use card type 0x85, whose description
2184 * follows this one. There is a EEPROM on the card (which is
2185 * connected to the I2C of one of those other chips), but is
2186 * not currently handled. There is also a facility for a
2187 * "monitor", which is also not currently implemented.
2188 */
2189 .name = "Kodicom 4400R (master)",
2190 .video_inputs = 16,
2191 .audio_inputs = 0,
2192 .tuner = -1,
2193 .tuner_type = -1,
2194 .svhs = -1,
2195 /* GPIO bits 0-9 used for analog switch:
2196 * 00 - 03: camera selector
2197 * 04 - 06: channel (controller) selector
2198 * 07: data (1->on, 0->off)
2199 * 08: strobe
2200 * 09: reset
2201 * bit 16 is input from sync separator for the channel
2202 */
2203 .gpiomask = 0x0003ff,
2204 .no_gpioirq = 1,
2205 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2206 .pll = PLL_28,
2207 .no_msp34xx = 1,
2208 .no_tda7432 = 1,
2209 .no_tda9875 = 1,
2210 .muxsel_hook = kodicom4400r_muxsel,
2211},
2212{
2213 /* Bill Brack <wbrack@mmm.com.hk> */
2214 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2215 * one which controls the analog switch, and must use the card type)
2216 * is the 2nd one detected. The other 3 chips should use this card
2217 * type
2218 */
2219 .name = "Kodicom 4400R (slave)",
2220 .video_inputs = 16,
2221 .audio_inputs = 0,
2222 .tuner = -1,
2223 .tuner_type = -1,
2224 .svhs = -1,
2225 .gpiomask = 0x010000,
2226 .no_gpioirq = 1,
2227 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2228 .pll = PLL_28,
2229 .no_msp34xx = 1,
2230 .no_tda7432 = 1,
2231 .no_tda9875 = 1,
2232 .muxsel_hook = kodicom4400r_muxsel,
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]2233},
2234{
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]2235 /* ---- card 0x85---------------------------------- */
2236 /* Michael Henson <mhenson@clarityvi.com> */
2237 /* Adlink RTV24 with special unlock codes */
2238 .name = "Adlink RTV24",
2239 .video_inputs = 4,
2240 .audio_inputs = 1,
2241 .tuner = 0,
2242 .svhs = 2,
2243 .muxsel = { 2, 3, 1, 0},
2244 .tuner_type = -1,
2245 .pll = PLL_28,
2246
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]2247}};
2248
2249static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2250
2251/* ----------------------------------------------------------------------- */
2252
2253static unsigned char eeprom_data[256];
2254
2255/*
2256 * identify card
2257 */
2258void __devinit bttv_idcard(struct bttv *btv)
2259{
2260 unsigned int gpiobits;
2261 int i,type;
2262 unsigned short tmp;
2263
2264 /* read PCI subsystem ID */
2265 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2266 btv->cardid = tmp << 16;
2267 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2268 btv->cardid |= tmp;
2269
2270 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2271 /* look for the card */
2272 for (type = -1, i = 0; cards[i].id != 0; i++)
2273 if (cards[i].id == btv->cardid)
2274 type = i;
2275
2276 if (type != -1) {
2277 /* found it */
2278 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2279 "PCI subsystem ID is %04x:%04x\n",
2280 btv->c.nr,cards[type].name,cards[type].cardnr,
2281 btv->cardid & 0xffff,
2282 (btv->cardid >> 16) & 0xffff);
2283 btv->c.type = cards[type].cardnr;
2284 } else {
2285 /* 404 */
2286 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2287 btv->c.nr, btv->cardid & 0xffff,
2288 (btv->cardid >> 16) & 0xffff);
2289 printk(KERN_DEBUG "please mail id, board name and "
2290 "the correct card= insmod option to kraxel@bytesex.org\n");
2291 }
2292 }
2293
2294 /* let the user override the autodetected type */
2295 if (card[btv->c.nr] < bttv_num_tvcards)
2296 btv->c.type=card[btv->c.nr];
2297
2298 /* print which card config we are using */
2299 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2300 bttv_tvcards[btv->c.type].name, btv->c.type,
2301 card[btv->c.nr] < bttv_num_tvcards
2302 ? "insmod option" : "autodetected");
2303
2304 /* overwrite gpio stuff ?? */
2305 if (UNSET == audioall && UNSET == audiomux[0])
2306 return;
2307
2308 if (UNSET != audiomux[0]) {
2309 gpiobits = 0;
2310 for (i = 0; i < 5; i++) {
2311 bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i];
2312 gpiobits |= audiomux[i];
2313 }
2314 } else {
2315 gpiobits = audioall;
2316 for (i = 0; i < 5; i++) {
2317 bttv_tvcards[btv->c.type].audiomux[i] = audioall;
2318 }
2319 }
2320 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2321 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2322 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2323 for (i = 0; i < 5; i++) {
2324 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]);
2325 }
2326 printk("\n");
2327}
2328
2329/*
2330 * (most) board specific initialisations goes here
2331 */
2332
2333/* Some Modular Technology cards have an eeprom, but no subsystem ID */
2334void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2335{
2336 int type = -1;
2337
2338 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2339 type = BTTV_MODTEC_205;
2340 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2341 type = BTTV_EURESYS_PICOLO;
2342 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2343 type = BTTV_HAUPPAUGE; /* old bt848 */
2344
2345 if (-1 != type) {
2346 btv->c.type = type;
2347 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2348 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2349 }
2350}
2351
2352static void flyvideo_gpio(struct bttv *btv)
2353{
2354 int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
2355 int tuner=-1,ttype;
2356
2357 gpio_inout(0xffffff, 0);
2358 udelay(8); // without this we would see the 0x1800 mask
2359 gpio = gpio_read();
2360 /* FIXME: must restore OUR_EN ??? */
2361
2362 // all cards provide GPIO info, some have an additional eeprom
2363 // LR50: GPIO coding can be found lower right CP1 .. CP9
2364 // CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2365 // GPIO14-12: n.c.
2366 // LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2367
2368 // lowest 3 bytes are remote control codes (no handshake needed)
2369 // xxxFFF: No remote control chip soldered
2370 // xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2371 // Note: Some bits are Audio_Mask !
2372
2373 ttype=(gpio&0x0f0000)>>16;
2374 switch(ttype) {
2375 case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
2376 break;
2377 case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
2378 break;
2379 case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216
2380 break;
2381 case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P
2382 break;
2383 case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF
2384 break;
2385 default:
2386 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
2387 }
2388
2389 has_remote = gpio & 0x800000;
2390 has_radio = gpio & 0x400000;
2391 // unknown 0x200000;
2392 // unknown2 0x100000;
2393 is_capture_only = !(gpio & 0x008000); //GPIO15
2394 has_tda9820_tda9821 = !(gpio & 0x004000);
2395 is_lr90 = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
2396 // gpio & 0x001000 // output bit for audio routing
2397
2398 if(is_capture_only)
2399 tuner=4; // No tuner present
2400
2401 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2402 btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
2403 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2404 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
2405 is_capture_only?"yes":"no ");
2406
2407 if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through
2408 btv->tuner_type = tuner;
2409 btv->has_radio = has_radio;
2410
2411 // LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
2412 // LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
2413 // Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
2414 if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
2415 //todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
2416}
2417
2418static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
2419 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
2420static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
2421 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
2422
2423static void miro_pinnacle_gpio(struct bttv *btv)
2424{
2425 int id,msp,gpio;
2426 char *info;
2427
2428 gpio_inout(0xffffff, 0);
2429 gpio = gpio_read();
2430 id = ((gpio>>10) & 63) -1;
2431 msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
2432 if (id < 32) {
2433 btv->tuner_type = miro_tunermap[id];
2434 if (0 == (gpio & 0x20)) {
2435 btv->has_radio = 1;
2436 if (!miro_fmtuner[id]) {
2437 btv->has_matchbox = 1;
2438 btv->mbox_we = (1<<6);
2439 btv->mbox_most = (1<<7);
2440 btv->mbox_clk = (1<<8);
2441 btv->mbox_data = (1<<9);
2442 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
2443 }
2444 } else {
2445 btv->has_radio = 0;
2446 }
2447 if (-1 != msp) {
2448 if (btv->c.type == BTTV_MIRO)
2449 btv->c.type = BTTV_MIROPRO;
2450 if (btv->c.type == BTTV_PINNACLE)
2451 btv->c.type = BTTV_PINNACLEPRO;
2452 }
2453 printk(KERN_INFO
2454 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
2455 btv->c.nr, id+1, btv->tuner_type,
2456 !btv->has_radio ? "no" :
2457 (btv->has_matchbox ? "matchbox" : "fmtuner"),
2458 (-1 == msp) ? "no" : "yes");
2459 } else {
2460 /* new cards with microtune tuner */
2461 id = 63 - id;
2462 btv->has_radio = 0;
2463 switch (id) {
2464 case 1:
2465 info = "PAL / mono";
2466 break;
2467 case 2:
2468 info = "PAL+SECAM / stereo";
2469 btv->has_radio = 1;
2470 break;
2471 case 3:
2472 info = "NTSC / stereo";
2473 btv->has_radio = 1;
2474 break;
2475 case 4:
2476 info = "PAL+SECAM / mono";
2477 break;
2478 case 5:
2479 info = "NTSC / mono";
2480 break;
2481 case 6:
2482 info = "NTSC / stereo";
2483 break;
2484 case 7:
2485 info = "PAL / stereo";
2486 break;
2487 default:
2488 info = "oops: unknown card";
2489 break;
2490 }
2491 if (-1 != msp)
2492 btv->c.type = BTTV_PINNACLEPRO;
2493 printk(KERN_INFO
2494 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
2495 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
2496 btv->tuner_type = 33;
2497 btv->pinnacle_id = id;
2498 }
2499}
2500
2501/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
2502#define LM1882_SYNC_DRIVE 0x200000L
2503
2504static void init_ids_eagle(struct bttv *btv)
2505{
2506 gpio_inout(0xffffff,0xFFFF37);
2507 gpio_write(0x200020);
2508
2509 /* flash strobe inverter ?! */
2510 gpio_write(0x200024);
2511
2512 /* switch sync drive off */
2513 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
2514
2515 /* set BT848 muxel to 2 */
2516 btaor((2)<<5, ~(2<<5), BT848_IFORM);
2517}
2518
2519/* Muxsel helper for the IDS Eagle.
2520 * the eagles does not use the standard muxsel-bits but
2521 * has its own multiplexer */
2522static void eagle_muxsel(struct bttv *btv, unsigned int input)
2523{
2524 btaor((2)<<5, ~(3<<5), BT848_IFORM);
2525 gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
2526
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]2527 /* composite */
2528 /* set chroma ADC to sleep */
2529 btor(BT848_ADC_C_SLEEP, BT848_ADC);
2530 /* set to composite video */
2531 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
2532 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]2533
2534 /* switch sync drive off */
2535 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
2536}
2537
2538static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
2539{
2540 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
2541 gpio_write(masks[input%4]);
2542}
2543
2544/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
2545 alarms output
2546
2547 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
2548 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
2549
2550 IN - sensor inputs, INx - sensor inputs and TI XORed together
2551 O1,O2,O3 - alarm outputs (relays)
2552
2553 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
2554
2555*/
2556
2557static void init_lmlbt4x(struct bttv *btv)
2558{
2559 printk(KERN_DEBUG "LMLBT4x init\n");
2560 btwrite(0x000000, BT848_GPIO_REG_INP);
2561 gpio_inout(0xffffff, 0x0006C0);
2562 gpio_write(0x000000);
2563}
2564
2565static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
2566{
2567 unsigned int inmux = input % 8;
2568 gpio_inout( 0xf, 0xf );
2569 gpio_bits( 0xf, inmux );
2570}
2571
2572static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
2573{
2574 unsigned int inmux = input % 4;
2575 gpio_inout( 3<<9, 3<<9 );
2576 gpio_bits( 3<<9, inmux<<9 );
2577}
2578
2579/* ----------------------------------------------------------------------- */
2580
2581static void bttv_reset_audio(struct bttv *btv)
2582{
2583 /*
2584 * BT878A has a audio-reset register.
2585 * 1. This register is an audio reset function but it is in
2586 * function-0 (video capture) address space.
2587 * 2. It is enough to do this once per power-up of the card.
2588 * 3. There is a typo in the Conexant doc -- it is not at
2589 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
2590 * --//Shrikumar 030609
2591 */
2592 if (btv->id != 878)
2593 return;
2594
2595 if (bttv_debug)
2596 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
2597 btwrite((1<<7), 0x058);
2598 udelay(10);
2599 btwrite( 0, 0x058);
2600}
2601
2602/* initialization part one -- before registering i2c bus */
2603void __devinit bttv_init_card1(struct bttv *btv)
2604{
2605 switch (btv->c.type) {
2606 case BTTV_HAUPPAUGE:
2607 case BTTV_HAUPPAUGE878:
2608 boot_msp34xx(btv,5);
2609 break;
2610 case BTTV_VOODOOTV_FM:
2611 boot_msp34xx(btv,20);
2612 break;
2613 case BTTV_AVERMEDIA98:
2614 boot_msp34xx(btv,11);
2615 break;
2616 case BTTV_HAUPPAUGEPVR:
2617 pvr_boot(btv);
2618 break;
2619 case BTTV_TWINHAN_DST:
2620 case BTTV_AVDVBT_771:
2621 btv->use_i2c_hw = 1;
2622 break;
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]2623 case BTTV_ADLINK_RTV24:
2624 init_RTV24( btv );
2625 break;
2626
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]2627 }
2628 if (!bttv_tvcards[btv->c.type].has_dvb)
2629 bttv_reset_audio(btv);
2630}
2631
2632/* initialization part two -- after registering i2c bus */
2633void __devinit bttv_init_card2(struct bttv *btv)
2634{
2635 int tda9887;
2636 btv->tuner_type = -1;
2637
2638 if (BTTV_UNKNOWN == btv->c.type) {
2639 bttv_readee(btv,eeprom_data,0xa0);
2640 identify_by_eeprom(btv,eeprom_data);
2641 }
2642
2643 switch (btv->c.type) {
2644 case BTTV_MIRO:
2645 case BTTV_MIROPRO:
2646 case BTTV_PINNACLE:
2647 case BTTV_PINNACLEPRO:
2648 /* miro/pinnacle */
2649 miro_pinnacle_gpio(btv);
2650 break;
2651 case BTTV_FLYVIDEO_98:
2652 case BTTV_MAXI:
2653 case BTTV_LIFE_FLYKIT:
2654 case BTTV_FLYVIDEO:
2655 case BTTV_TYPHOON_TVIEW:
2656 case BTTV_CHRONOS_VS2:
2657 case BTTV_FLYVIDEO_98FM:
2658 case BTTV_FLYVIDEO2000:
2659 case BTTV_FLYVIDEO98EZ:
2660 case BTTV_CONFERENCETV:
2661 case BTTV_LIFETEC_9415:
2662 flyvideo_gpio(btv);
2663 break;
2664 case BTTV_HAUPPAUGE:
2665 case BTTV_HAUPPAUGE878:
2666 case BTTV_HAUPPAUGEPVR:
2667 /* pick up some config infos from the eeprom */
2668 bttv_readee(btv,eeprom_data,0xa0);
2669 hauppauge_eeprom(btv);
2670 break;
2671 case BTTV_AVERMEDIA98:
2672 case BTTV_AVPHONE98:
2673 bttv_readee(btv,eeprom_data,0xa0);
2674 avermedia_eeprom(btv);
2675 break;
2676 case BTTV_PXC200:
2677 init_PXC200(btv);
2678 break;
2679 case BTTV_PICOLO_TETRA_CHIP:
2680 picolo_tetra_init(btv);
2681 break;
2682 case BTTV_VHX:
2683 btv->has_radio = 1;
2684 btv->has_matchbox = 1;
2685 btv->mbox_we = 0x20;
2686 btv->mbox_most = 0;
2687 btv->mbox_clk = 0x08;
2688 btv->mbox_data = 0x10;
2689 btv->mbox_mask = 0x38;
2690 break;
2691 case BTTV_VOBIS_BOOSTAR:
2692 case BTTV_TERRATV:
2693 terratec_active_radio_upgrade(btv);
2694 break;
2695 case BTTV_MAGICTVIEW061:
2696 if (btv->cardid == 0x3002144f) {
2697 btv->has_radio=1;
2698 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
2699 }
2700 break;
2701 case BTTV_STB2:
2702 if (btv->cardid == 0x3060121a) {
2703 /* Fix up entry for 3DFX VoodooTV 100,
2704 which is an OEM STB card variant. */
2705 btv->has_radio=0;
2706 btv->tuner_type=TUNER_TEMIC_NTSC;
2707 }
2708 break;
2709 case BTTV_OSPREY1x0:
2710 case BTTV_OSPREY1x0_848:
2711 case BTTV_OSPREY101_848:
2712 case BTTV_OSPREY1x1:
2713 case BTTV_OSPREY1x1_SVID:
2714 case BTTV_OSPREY2xx:
2715 case BTTV_OSPREY2x0_SVID:
2716 case BTTV_OSPREY2x0:
2717 case BTTV_OSPREY500:
2718 case BTTV_OSPREY540:
2719 case BTTV_OSPREY2000:
2720 bttv_readee(btv,eeprom_data,0xa0);
2721 osprey_eeprom(btv);
2722 break;
2723 case BTTV_IDS_EAGLE:
2724 init_ids_eagle(btv);
2725 break;
2726 case BTTV_MODTEC_205:
2727 bttv_readee(btv,eeprom_data,0xa0);
2728 modtec_eeprom(btv);
2729 break;
2730 case BTTV_LMLBT4:
2731 init_lmlbt4x(btv);
2732 break;
2733 case BTTV_TIBET_CS16:
2734 tibetCS16_init(btv);
2735 break;
2736 case BTTV_KODICOM_4400R:
2737 kodicom4400r_init(btv);
2738 break;
2739 }
2740
2741 /* pll configuration */
2742 if (!(btv->id==848 && btv->revision==0x11)) {
2743 /* defaults from card list */
2744 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
2745 btv->pll.pll_ifreq=28636363;
2746 btv->pll.pll_crystal=BT848_IFORM_XT0;
2747 }
2748 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
2749 btv->pll.pll_ifreq=35468950;
2750 btv->pll.pll_crystal=BT848_IFORM_XT1;
2751 }
2752 /* insmod options can override */
2753 switch (pll[btv->c.nr]) {
2754 case 0: /* none */
2755 btv->pll.pll_crystal = 0;
2756 btv->pll.pll_ifreq = 0;
2757 btv->pll.pll_ofreq = 0;
2758 break;
2759 case 1: /* 28 MHz */
2760 case 28:
2761 btv->pll.pll_ifreq = 28636363;
2762 btv->pll.pll_ofreq = 0;
2763 btv->pll.pll_crystal = BT848_IFORM_XT0;
2764 break;
2765 case 2: /* 35 MHz */
2766 case 35:
2767 btv->pll.pll_ifreq = 35468950;
2768 btv->pll.pll_ofreq = 0;
2769 btv->pll.pll_crystal = BT848_IFORM_XT1;
2770 break;
2771 }
2772 }
2773 btv->pll.pll_current = -1;
2774
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]2775 /* tuner configuration (from card list / autodetect / insmod option) */
2776 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
2777 if(UNSET == btv->tuner_type)
2778 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
2779 if (UNSET != tuner[btv->c.nr])
2780 btv->tuner_type = tuner[btv->c.nr];
2781 printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
2782 if (btv->pinnacle_id != UNSET)
Mauro Carvalho Chehabfa9846a2005-07-12 13:58:42 -0700[diff] [blame]2783 bttv_call_i2c_clients(btv, AUDC_CONFIG_PINNACLE,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]2784 &btv->pinnacle_id);
Mauro Carvalho Chehabfa9846a2005-07-12 13:58:42 -0700[diff] [blame]2785 if (btv->tuner_type != UNSET) {
2786 struct tuner_setup tun_setup;
2787
2788 tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
2789 tun_setup.type = btv->tuner_type;
2790 tun_setup.addr = ADDR_UNSET;
2791
2792 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
2793 }
2794
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]2795 btv->svhs = bttv_tvcards[btv->c.type].svhs;
2796 if (svhs[btv->c.nr] != UNSET)
2797 btv->svhs = svhs[btv->c.nr];
2798 if (remote[btv->c.nr] != UNSET)
2799 btv->has_remote = remote[btv->c.nr];
2800
2801 if (bttv_tvcards[btv->c.type].has_radio)
2802 btv->has_radio=1;
2803 if (bttv_tvcards[btv->c.type].has_remote)
2804 btv->has_remote=1;
2805 if (bttv_tvcards[btv->c.type].no_gpioirq)
2806 btv->gpioirq=0;
2807 if (bttv_tvcards[btv->c.type].audio_hook)
2808 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
2809
2810 if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
2811 /* detect Bt832 chip for quartzsight digital camera */
2812 if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
2813 (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
2814 boot_bt832(btv);
2815 }
2816
2817 if (!autoload)
2818 return;
2819
2820 /* try to detect audio/fader chips */
2821 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
2822 bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
2823 request_module("msp3400");
2824
2825 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
2826 bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
2827 request_module("msp3400");
2828
2829 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
2830 bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
2831 request_module("tda9875");
2832
2833 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
2834 bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
2835 request_module("tda7432");
2836
2837 if (bttv_tvcards[btv->c.type].needs_tvaudio)
2838 request_module("tvaudio");
2839
2840 /* tuner modules */
2841 tda9887 = 0;
2842 if (btv->pinnacle_id != UNSET)
2843 tda9887 = 1;
2844 if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
2845 bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
2846 tda9887 = 1;
2847 if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
2848 (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
2849 (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
2850 tda9887)
2851 request_module("tda9887");
2852 if (btv->tuner_type != UNSET)
2853 request_module("tuner");
2854}
2855
2856
2857/* ----------------------------------------------------------------------- */
2858
2859static void modtec_eeprom(struct bttv *btv)
2860{
2861 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
2862 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
2863 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2864 btv->c.nr,&eeprom_data[0x1e]);
2865 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
2866 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
2867 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2868 btv->c.nr,&eeprom_data[0x1e]);
2869 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
2870 btv->tuner_type=TUNER_PHILIPS_NTSC;
2871 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2872 btv->c.nr,&eeprom_data[0x1e]);
2873 } else {
2874 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
2875 btv->c.nr,&eeprom_data[0x1e]);
2876 }
2877}
2878
2879static void __devinit hauppauge_eeprom(struct bttv *btv)
2880{
2881 struct tveeprom tv;
2882
2883 tveeprom_hauppauge_analog(&tv, eeprom_data);
2884 btv->tuner_type = tv.tuner_type;
2885 btv->has_radio = tv.has_radio;
2886}
2887
2888static int terratec_active_radio_upgrade(struct bttv *btv)
2889{
2890 int freq;
2891
2892 btv->has_radio = 1;
2893 btv->has_matchbox = 1;
2894 btv->mbox_we = 0x10;
2895 btv->mbox_most = 0x20;
2896 btv->mbox_clk = 0x08;
2897 btv->mbox_data = 0x04;
2898 btv->mbox_mask = 0x3c;
2899
2900 btv->mbox_iow = 1 << 8;
2901 btv->mbox_ior = 1 << 9;
2902 btv->mbox_csel = 1 << 10;
2903
2904 freq=88000/62.5;
2905 tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8
2906 if (0x1ed8 == tea5757_read(btv)) {
2907 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
2908 btv->c.nr);
2909 btv->has_radio = 1;
2910 btv->has_matchbox = 1;
2911 } else {
2912 btv->has_radio = 0;
2913 btv->has_matchbox = 0;
2914 }
2915 return 0;
2916}
2917
2918
2919/* ----------------------------------------------------------------------- */
2920
2921/*
2922 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
2923 *
2924 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
2925 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
2926 * unpacked with unzip).
2927 */
2928#define PVR_GPIO_DELAY 10
2929
2930#define BTTV_ALT_DATA 0x000001
2931#define BTTV_ALT_DCLK 0x100000
2932#define BTTV_ALT_NCONFIG 0x800000
2933
2934static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
2935{
2936 u32 n;
2937 u8 bits;
2938 int i;
2939
2940 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
2941 gpio_write(0);
2942 udelay(PVR_GPIO_DELAY);
2943
2944 gpio_write(BTTV_ALT_NCONFIG);
2945 udelay(PVR_GPIO_DELAY);
2946
2947 for (n = 0; n < microlen; n++) {
2948 bits = micro[n];
2949 for ( i = 0 ; i < 8 ; i++ ) {
2950 gpio_bits(BTTV_ALT_DCLK,0);
2951 if (bits & 0x01)
2952 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
2953 else
2954 gpio_bits(BTTV_ALT_DATA,0);
2955 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
2956 bits >>= 1;
2957 }
2958 }
2959 gpio_bits(BTTV_ALT_DCLK,0);
2960 udelay(PVR_GPIO_DELAY);
2961
2962 /* begin Altera init loop (Not necessary,but doesn't hurt) */
2963 for (i = 0 ; i < 30 ; i++) {
2964 gpio_bits(BTTV_ALT_DCLK,0);
2965 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
2966 }
2967 gpio_bits(BTTV_ALT_DCLK,0);
2968 return 0;
2969}
2970
2971static int __devinit pvr_boot(struct bttv *btv)
2972{
2973 const struct firmware *fw_entry;
2974 int rc;
2975
2976 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
2977 if (rc != 0) {
2978 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
2979 btv->c.nr);
2980 return rc;
2981 }
2982 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
2983 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
2984 btv->c.nr, (rc < 0) ? "failed" : "ok");
2985 release_firmware(fw_entry);
2986 return rc;
2987}
2988
2989/* ----------------------------------------------------------------------- */
2990/* some osprey specific stuff */
2991
2992static void __devinit osprey_eeprom(struct bttv *btv)
2993{
2994 int i = 0;
2995 unsigned char *ee = eeprom_data;
2996 unsigned long serial = 0;
2997
2998 if (btv->c.type == 0) {
2999 /* this might be an antique... check for MMAC label in eeprom */
3000 if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3001 unsigned char checksum = 0;
3002 for (i =0; i<21; i++)
3003 checksum += ee[i];
3004 if (checksum != ee[21])
3005 return;
3006 btv->c.type = BTTV_OSPREY1x0_848;
3007 for (i = 12; i < 21; i++)
3008 serial *= 10, serial += ee[i] - '0';
3009 }
3010 } else {
3011 unsigned short type;
3012 int offset = 4*16;
3013
3014 for(; offset < 8*16; offset += 16) {
3015 unsigned short checksum = 0;
3016 /* verify the checksum */
3017 for(i = 0; i<14; i++) checksum += ee[i+offset];
3018 checksum = ~checksum; /* no idea why */
3019 if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3020 ((checksum & 0x0FF) == ee[offset+15])) {
3021 break;
3022 }
3023 }
3024
3025 if (offset >= 8*16)
3026 return;
3027
3028 /* found a valid descriptor */
3029 type = (ee[offset+4]<<8) | (ee[offset+5]);
3030
3031 switch(type) {
3032
3033 /* 848 based */
3034 case 0x0004:
3035 btv->c.type = BTTV_OSPREY1x0_848;
3036 break;
3037 case 0x0005:
3038 btv->c.type = BTTV_OSPREY101_848;
3039 break;
3040
3041 /* 878 based */
3042 case 0x0012:
3043 case 0x0013:
3044 btv->c.type = BTTV_OSPREY1x0;
3045 break;
3046 case 0x0014:
3047 case 0x0015:
3048 btv->c.type = BTTV_OSPREY1x1;
3049 break;
3050 case 0x0016:
3051 case 0x0017:
3052 case 0x0020:
3053 btv->c.type = BTTV_OSPREY1x1_SVID;
3054 break;
3055 case 0x0018:
3056 case 0x0019:
3057 case 0x001E:
3058 case 0x001F:
3059 btv->c.type = BTTV_OSPREY2xx;
3060 break;
3061 case 0x001A:
3062 case 0x001B:
3063 btv->c.type = BTTV_OSPREY2x0_SVID;
3064 break;
3065 case 0x0040:
3066 btv->c.type = BTTV_OSPREY500;
3067 break;
3068 case 0x0050:
3069 case 0x0056:
3070 btv->c.type = BTTV_OSPREY540;
3071 /* bttv_osprey_540_init(btv); */
3072 break;
3073 case 0x0060:
3074 case 0x0070:
3075 btv->c.type = BTTV_OSPREY2x0;
3076 //enable output on select control lines
3077 gpio_inout(0xffffff,0x000303);
3078 break;
3079 default:
3080 /* unknown...leave generic, but get serial # */
3081 break;
3082 }
3083 serial = (ee[offset+6] << 24)
3084 | (ee[offset+7] << 16)
3085 | (ee[offset+8] << 8)
3086 | (ee[offset+9]);
3087 }
3088
3089 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3090 btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3091}
3092
3093/* ----------------------------------------------------------------------- */
3094/* AVermedia specific stuff, from bktr_card.c */
3095
3096static int tuner_0_table[] = {
3097 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3098 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3099 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3100 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3101 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3102 TUNER_PHILIPS_FM1216ME_MK3 };
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3103
3104static int tuner_1_table[] = {
3105 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3106 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3107 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3108 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
3109 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3110
3111static void __devinit avermedia_eeprom(struct bttv *btv)
3112{
3113 int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3114
3115 tuner_make = (eeprom_data[0x41] & 0x7);
3116 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3117 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3118 btv->has_remote = (eeprom_data[0x42] & 0x01);
3119
3120 if (tuner_make == 0 || tuner_make == 2)
3121 if(tuner_format <=0x0a)
3122 tuner = tuner_0_table[tuner_format];
3123 if (tuner_make == 1)
3124 if(tuner_format <=9)
3125 tuner = tuner_1_table[tuner_format];
3126
3127 if (tuner_make == 4)
3128 if(tuner_format == 0x09)
3129 tuner = TUNER_LG_NTSC_NEW_TAPC; // TAPC-G702P
3130
3131 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3132 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3133 if(tuner) {
3134 btv->tuner_type=tuner;
3135 printk("%d",tuner);
3136 } else
3137 printk("Unknown type");
3138 printk(" radio:%s remote control:%s\n",
3139 tuner_tv_fm ? "yes" : "no",
3140 btv->has_remote ? "yes" : "no");
3141}
3142
3143/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3144void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3145{
3146 // fix up our card entry
3147 if(norm==VIDEO_MODE_NTSC) {
3148 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
3149 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
3150 dprintk("bttv_tda9880_setnorm to NTSC\n");
3151 }
3152 else {
3153 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
3154 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
3155 dprintk("bttv_tda9880_setnorm to PAL\n");
3156 }
3157 // set GPIO according
3158 gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3159 bttv_tvcards[btv->c.type].audiomux[btv->audio]);
3160}
3161
3162
3163/*
3164 * reset/enable the MSP on some Hauppauge cards
3165 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3166 *
3167 * Hauppauge: pin 5
3168 * Voodoo: pin 20
3169 */
3170static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3171{
3172 int mask = (1 << pin);
3173
3174 gpio_inout(mask,mask);
3175 gpio_bits(mask,0);
3176 udelay(2500);
3177 gpio_bits(mask,mask);
3178
3179 if (bttv_gpio)
3180 bttv_gpio_tracking(btv,"msp34xx");
3181 if (bttv_verbose)
3182 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3183 "init [%d]\n", btv->c.nr, pin);
3184}
3185
3186static void __devinit boot_bt832(struct bttv *btv)
3187{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3188}
3189
3190/* ----------------------------------------------------------------------- */
3191/* Imagenation L-Model PXC200 Framegrabber */
3192/* This is basically the same procedure as
3193 * used by Alessandro Rubini in his pxc200
3194 * driver, but using BTTV functions */
3195
3196static void __devinit init_PXC200(struct bttv *btv)
3197{
3198 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3199 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3200 0x00 };
3201 unsigned int i;
3202 int tmp;
3203 u32 val;
3204
3205 /* Initialise GPIO-connevted stuff */
3206 gpio_inout(0xffffff, (1<<13));
3207 gpio_write(0);
3208 udelay(3);
3209 gpio_write(1<<13);
3210 /* GPIO inputs are pulled up, so no need to drive
3211 * reset pin any longer */
3212 gpio_bits(0xffffff, 0);
3213 if (bttv_gpio)
3214 bttv_gpio_tracking(btv,"pxc200");
3215
3216 /* we could/should try and reset/control the AD pots? but
3217 right now we simply turned off the crushing. Without
3218 this the AGC drifts drifts
3219 remember the EN is reverse logic -->
3220 setting BT848_ADC_AGC_EN disable the AGC
3221 tboult@eecs.lehigh.edu
3222 */
3223
3224 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3225
3226 /* Initialise MAX517 DAC */
3227 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3228 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3229
3230 /* Initialise 12C508 PIC */
3231 /* The I2CWrite and I2CRead commmands are actually to the
3232 * same chips - but the R/W bit is included in the address
3233 * argument so the numbers are different */
3234
3235
3236 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3237
3238 /* First of all, enable the clock line. This is used in the PXC200-F */
3239 val = btread(BT848_GPIO_DMA_CTL);
3240 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3241 btwrite(val, BT848_GPIO_DMA_CTL);
3242
3243 /* Then, push to 0 the reset pin long enough to reset the *
3244 * device same as above for the reset line, but not the same
3245 * value sent to the GPIO-connected stuff
3246 * which one is the good one? */
3247 gpio_inout(0xffffff,(1<<2));
3248 gpio_write(0);
3249 udelay(10);
3250 gpio_write(1<<2);
3251
3252 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3253 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3254 if (tmp != -1) {
3255 printk(KERN_INFO
3256 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3257 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3258 }
3259 }
3260
3261 printk(KERN_INFO "PXC200 Initialised.\n");
3262}
3263
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3264
3265
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3266/* ----------------------------------------------------------------------- */
3267/*
3268 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3269 * it. This apparently involves the following procedure for each 878 chip:
3270 *
3271 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
3272 *
3273 * 2) write to GPIO_DATA
3274 * - 0x0E
3275 * - sleep 1ms
3276 * - 0x10 + 0x0E
3277 * - sleep 10ms
3278 * - 0x0E
3279 * read from GPIO_DATA into buf (uint_32)
3280 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3281 * error. ERROR_CPLD_Check_Failed stop.
3282 *
3283 * 3) write to GPIO_DATA
3284 * - write 0x4400 + 0x0E
3285 * - sleep 10ms
3286 * - write 0x4410 + 0x0E
3287 * - sleep 1ms
3288 * - write 0x0E
3289 * read from GPIO_DATA into buf (uint_32)
3290 * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
3291 * error. ERROR_CPLD_Check_Failed.
3292 */
3293/* ----------------------------------------------------------------------- */
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3294void
3295init_RTV24 (struct bttv *btv)
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3296{
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3297 uint32_t dataRead = 0;
3298 long watchdog_value = 0x0E;
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3299
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3300 printk (KERN_INFO
3301 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3302 btv->c.nr);
3303
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3304 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3305
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3306 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
3307 msleep (1);
3308 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
3309 msleep (10);
3310 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3311
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3312 dataRead = btread (BT848_GPIO_DATA);
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3313
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3314 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
3315 printk (KERN_INFO
3316 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
3317 btv->c.nr, dataRead);
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3318 }
3319
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3320 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
3321 msleep (10);
3322 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
3323 msleep (1);
3324 btwrite (watchdog_value, BT848_GPIO_DATA);
3325 msleep (1);
3326 dataRead = btread (BT848_GPIO_DATA);
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3327
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3328 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
3329 printk (KERN_INFO
3330 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
3331 btv->c.nr, dataRead);
3332
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3333 return;
3334 }
3335
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3336 printk (KERN_INFO
3337 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
Peter Skipworth93b43f12005-06-23 22:04:45 -0700[diff] [blame]3338}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3339
Mauro Carvalho Chehab2d03e282005-06-23 22:04:58 -0700[diff] [blame]3340
3341
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3342/* ----------------------------------------------------------------------- */
3343/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
3344/*
3345 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
3346 * This code is placed under the terms of the GNU General Public License
3347 *
3348 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
3349 */
3350
3351static void bus_low(struct bttv *btv, int bit)
3352{
3353 if (btv->mbox_ior) {
3354 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3355 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3356 udelay(5);
3357 }
3358
3359 gpio_bits(bit,0);
3360 udelay(5);
3361
3362 if (btv->mbox_ior) {
3363 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3364 udelay(5);
3365 }
3366}
3367
3368static void bus_high(struct bttv *btv, int bit)
3369{
3370 if (btv->mbox_ior) {
3371 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3372 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3373 udelay(5);
3374 }
3375
3376 gpio_bits(bit,bit);
3377 udelay(5);
3378
3379 if (btv->mbox_ior) {
3380 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3381 udelay(5);
3382 }
3383}
3384
3385static int bus_in(struct bttv *btv, int bit)
3386{
3387 if (btv->mbox_ior) {
3388 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3389 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3390 udelay(5);
3391
3392 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3393 udelay(5);
3394 }
3395 return gpio_read() & (bit);
3396}
3397
3398/* TEA5757 register bits */
3399#define TEA_FREQ 0:14
3400#define TEA_BUFFER 15:15
3401
3402#define TEA_SIGNAL_STRENGTH 16:17
3403
3404#define TEA_PORT1 18:18
3405#define TEA_PORT0 19:19
3406
3407#define TEA_BAND 20:21
3408#define TEA_BAND_FM 0
3409#define TEA_BAND_MW 1
3410#define TEA_BAND_LW 2
3411#define TEA_BAND_SW 3
3412
3413#define TEA_MONO 22:22
3414#define TEA_ALLOW_STEREO 0
3415#define TEA_FORCE_MONO 1
3416
3417#define TEA_SEARCH_DIRECTION 23:23
3418#define TEA_SEARCH_DOWN 0
3419#define TEA_SEARCH_UP 1
3420
3421#define TEA_STATUS 24:24
3422#define TEA_STATUS_TUNED 0
3423#define TEA_STATUS_SEARCHING 1
3424
3425/* Low-level stuff */
3426static int tea5757_read(struct bttv *btv)
3427{
3428 unsigned long timeout;
3429 int value = 0;
3430 int i;
3431
3432 /* better safe than sorry */
3433 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
3434
3435 if (btv->mbox_ior) {
3436 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3437 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3438 udelay(5);
3439 }
3440
3441 if (bttv_gpio)
3442 bttv_gpio_tracking(btv,"tea5757 read");
3443
3444 bus_low(btv,btv->mbox_we);
3445 bus_low(btv,btv->mbox_clk);
3446
3447 udelay(10);
3448 timeout= jiffies + HZ;
3449
3450 // wait for DATA line to go low; error if it doesn't
3451 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
3452 schedule();
3453 if (bus_in(btv,btv->mbox_data)) {
3454 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
3455 return -1;
3456 }
3457
3458 dprintk("bttv%d: tea5757:",btv->c.nr);
3459 for(i = 0; i < 24; i++)
3460 {
3461 udelay(5);
3462 bus_high(btv,btv->mbox_clk);
3463 udelay(5);
3464 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
3465 bus_low(btv,btv->mbox_clk);
3466 value <<= 1;
3467 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
3468 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
3469 }
3470 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
3471 return value;
3472}
3473
3474static int tea5757_write(struct bttv *btv, int value)
3475{
3476 int i;
3477 int reg = value;
3478
3479 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
3480
3481 if (btv->mbox_ior) {
3482 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3483 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3484 udelay(5);
3485 }
3486 if (bttv_gpio)
3487 bttv_gpio_tracking(btv,"tea5757 write");
3488
3489 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
3490 bus_low(btv,btv->mbox_clk);
3491 bus_high(btv,btv->mbox_we);
3492 for(i = 0; i < 25; i++)
3493 {
3494 if (reg & 0x1000000)
3495 bus_high(btv,btv->mbox_data);
3496 else
3497 bus_low(btv,btv->mbox_data);
3498 reg <<= 1;
3499 bus_high(btv,btv->mbox_clk);
3500 udelay(10);
3501 bus_low(btv,btv->mbox_clk);
3502 udelay(10);
3503 }
3504 bus_low(btv,btv->mbox_we); /* unmute !!! */
3505 return 0;
3506}
3507
3508void tea5757_set_freq(struct bttv *btv, unsigned short freq)
3509{
3510 dprintk("tea5757_set_freq %d\n",freq);
3511 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3512}
3513
3514
3515/* ----------------------------------------------------------------------- */
3516/* winview */
3517
3518void winview_audio(struct bttv *btv, struct video_audio *v, int set)
3519{
3520 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
3521 int bits_out, loops, vol, data;
3522
3523 if (!set) {
3524 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
3525 v->flags |= VIDEO_AUDIO_VOLUME;
3526 return;
3527 }
3528
3529 /* 32 levels logarithmic */
3530 vol = 32 - ((v->volume>>11));
3531 /* units */
3532 bits_out = (PT2254_DBS_IN_2>>(vol%5));
3533 /* tens */
3534 bits_out |= (PT2254_DBS_IN_10>>(vol/5));
3535 bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
3536 data = gpio_read();
3537 data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
3538 WINVIEW_PT2254_STROBE);
3539 for (loops = 17; loops >= 0 ; loops--) {
3540 if (bits_out & (1<<loops))
3541 data |= WINVIEW_PT2254_DATA;
3542 else
3543 data &= ~WINVIEW_PT2254_DATA;
3544 gpio_write(data);
3545 udelay(5);
3546 data |= WINVIEW_PT2254_CLK;
3547 gpio_write(data);
3548 udelay(5);
3549 data &= ~WINVIEW_PT2254_CLK;
3550 gpio_write(data);
3551 }
3552 data |= WINVIEW_PT2254_STROBE;
3553 data &= ~WINVIEW_PT2254_DATA;
3554 gpio_write(data);
3555 udelay(10);
3556 data &= ~WINVIEW_PT2254_STROBE;
3557 gpio_write(data);
3558}
3559
3560/* ----------------------------------------------------------------------- */
3561/* mono/stereo control for various cards (which don't use i2c chips but */
3562/* connect something to the GPIO pins */
3563
3564static void
3565gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
3566{
3567 unsigned int con = 0;
3568
3569 if (set) {
3570 gpio_inout(0x300, 0x300);
3571 if (v->mode & VIDEO_SOUND_LANG1)
3572 con = 0x000;
3573 if (v->mode & VIDEO_SOUND_LANG2)
3574 con = 0x300;
3575 if (v->mode & VIDEO_SOUND_STEREO)
3576 con = 0x200;
3577// if (v->mode & VIDEO_SOUND_MONO)
3578// con = 0x100;
3579 gpio_bits(0x300, con);
3580 } else {
3581 v->mode = VIDEO_SOUND_STEREO |
3582 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3583 }
3584}
3585
3586static void
3587gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
3588{
3589 unsigned int val, con;
3590
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3591 if (btv->radio_user)
3592 return;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3593
3594 val = gpio_read();
3595 if (set) {
3596 con = 0x000;
3597 if (v->mode & VIDEO_SOUND_LANG2) {
3598 if (v->mode & VIDEO_SOUND_LANG1) {
3599 /* LANG1 + LANG2 */
3600 con = 0x100;
3601 }
3602 else {
3603 /* LANG2 */
3604 con = 0x300;
3605 }
3606 }
3607 if (con != (val & 0x300)) {
3608 gpio_bits(0x300, con);
3609 if (bttv_gpio)
3610 bttv_gpio_tracking(btv,"gvbctv5pci");
3611 }
3612 } else {
3613 switch (val & 0x70) {
3614 case 0x10:
3615 v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3616 break;
3617 case 0x30:
3618 v->mode = VIDEO_SOUND_LANG2;
3619 break;
3620 case 0x50:
3621 v->mode = VIDEO_SOUND_LANG1;
3622 break;
3623 case 0x60:
3624 v->mode = VIDEO_SOUND_STEREO;
3625 break;
3626 case 0x70:
3627 v->mode = VIDEO_SOUND_MONO;
3628 break;
3629 default:
3630 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3631 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3632 }
3633 }
3634}
3635
3636/*
3637 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
3638 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
3639 * 0xdde enables mono and 0xccd enables sap
3640 *
3641 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
3642 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
3643 * input/output sound connection, so both must be set for output mode.
3644 *
3645 * Looks like it's needed only for the "tvphone", the "tvphone 98"
3646 * handles this with a tda9840
3647 *
3648 */
3649static void
3650avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
3651{
3652 int val = 0;
3653
3654 if (set) {
3655 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3656 val = 0x02;
3657 if (v->mode & VIDEO_SOUND_STEREO)
3658 val = 0x01;
3659 if (val) {
3660 gpio_bits(0x03,val);
3661 if (bttv_gpio)
3662 bttv_gpio_tracking(btv,"avermedia");
3663 }
3664 } else {
3665 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3666 VIDEO_SOUND_LANG1;
3667 return;
3668 }
3669}
3670
3671static void
3672avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
3673{
3674 int val = 0;
3675
3676 if (set) {
3677 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3678 val = 0x01;
3679 if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
3680 val = 0x02;
3681 btaor(val, ~0x03, BT848_GPIO_DATA);
3682 if (bttv_gpio)
3683 bttv_gpio_tracking(btv,"avermedia");
3684 } else {
3685 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3686 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3687 return;
3688 }
3689}
3690
3691/* Lifetec 9415 handling */
3692static void
3693lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
3694{
3695 int val = 0;
3696
3697 if (gpio_read() & 0x4000) {
3698 v->mode = VIDEO_SOUND_MONO;
3699 return;
3700 }
3701
3702 if (set) {
3703 if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
3704 val = 0x0080;
3705 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
3706 val = 0x0880;
3707 if ((v->mode & VIDEO_SOUND_LANG1) ||
3708 (v->mode & VIDEO_SOUND_MONO))
3709 val = 0;
3710 gpio_bits(0x0880, val);
3711 if (bttv_gpio)
3712 bttv_gpio_tracking(btv,"lt9415");
3713 } else {
3714 /* autodetect doesn't work with this card :-( */
3715 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3716 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3717 return;
3718 }
3719}
3720
3721// TDA9821 on TerraTV+ Bt848, Bt878
3722static void
3723terratv_audio(struct bttv *btv, struct video_audio *v, int set)
3724{
3725 unsigned int con = 0;
3726
3727 if (set) {
3728 gpio_inout(0x180000,0x180000);
3729 if (v->mode & VIDEO_SOUND_LANG2)
3730 con = 0x080000;
3731 if (v->mode & VIDEO_SOUND_STEREO)
3732 con = 0x180000;
3733 gpio_bits(0x180000, con);
3734 if (bttv_gpio)
3735 bttv_gpio_tracking(btv,"terratv");
3736 } else {
3737 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3738 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3739 }
3740}
3741
3742static void
3743winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
3744{
3745 unsigned long val = 0;
3746
3747 if (set) {
3748 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
3749 if (v->mode & VIDEO_SOUND_MONO) /* Mono */
3750 val = 0x420000;
3751 if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
3752 val = 0x420000;
3753 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3754 val = 0x410000;
3755 if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
3756 val = 0x020000;
3757 if (val) {
3758 gpio_bits(0x430000, val);
3759 if (bttv_gpio)
3760 bttv_gpio_tracking(btv,"winfast2000");
3761 }
3762 } else {
3763 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3764 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3765 }
3766}
3767
3768/*
3769 * Dariusz Kowalewski <darekk@automex.pl>
3770 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
3771 * revision 9B has on-board TDA9874A sound decoder).
3772 *
3773 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
3774 * will mute this cards.
3775 */
3776static void
3777pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
3778{
3779 unsigned int val = 0;
3780
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3781 if (btv->radio_user)
3782 return;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3783
3784 if (set) {
3785 if (v->mode & VIDEO_SOUND_MONO) {
3786 val = 0x01;
3787 }
3788 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
3789 || (v->mode & VIDEO_SOUND_STEREO)) {
3790 val = 0x02;
3791 }
3792 if (val) {
3793 gpio_bits(0x03,val);
3794 if (bttv_gpio)
3795 bttv_gpio_tracking(btv,"pvbt878p9b");
3796 }
3797 } else {
3798 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3799 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3800 }
3801}
3802
3803/*
3804 * Dariusz Kowalewski <darekk@automex.pl>
3805 * sound control for FlyVideo 2000S (with tda9874 decoder)
3806 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
3807 */
3808static void
3809fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
3810{
3811 unsigned int val = 0xffff;
3812
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3813 if (btv->radio_user)
3814 return;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]3815 if (set) {
3816 if (v->mode & VIDEO_SOUND_MONO) {
3817 val = 0x0000;
3818 }
3819 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
3820 || (v->mode & VIDEO_SOUND_STEREO)) {
3821 val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
3822 }
3823 if (val != 0xffff) {
3824 gpio_bits(0x1800, val);
3825 if (bttv_gpio)
3826 bttv_gpio_tracking(btv,"fv2000s");
3827 }
3828 } else {
3829 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3830 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3831 }
3832}
3833
3834/*
3835 * sound control for Canopus WinDVR PCI
3836 * Masaki Suzuki <masaki@btree.org>
3837 */
3838static void
3839windvr_audio(struct bttv *btv, struct video_audio *v, int set)
3840{
3841 unsigned long val = 0;
3842
3843 if (set) {
3844 if (v->mode & VIDEO_SOUND_MONO)
3845 val = 0x040000;
3846 if (v->mode & VIDEO_SOUND_LANG1)
3847 val = 0;
3848 if (v->mode & VIDEO_SOUND_LANG2)
3849 val = 0x100000;
3850 if (v->mode & VIDEO_SOUND_STEREO)
3851 val = 0;
3852 if (val) {
3853 gpio_bits(0x140000, val);
3854 if (bttv_gpio)
3855 bttv_gpio_tracking(btv,"windvr");
3856 }
3857 } else {
3858 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3859 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3860 }
3861}
3862
3863/*
3864 * sound control for AD-TVK503
3865 * Hiroshi Takekawa <sian@big.or.jp>
3866 */
3867static void
3868adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
3869{
3870 unsigned int con = 0xffffff;
3871
3872 //btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN);
3873
3874 if (set) {
3875 //btor(***, BT848_GPIO_OUT_EN);
3876 if (v->mode & VIDEO_SOUND_LANG1)
3877 con = 0x00000000;
3878 if (v->mode & VIDEO_SOUND_LANG2)
3879 con = 0x00180000;
3880 if (v->mode & VIDEO_SOUND_STEREO)
3881 con = 0x00000000;
3882 if (v->mode & VIDEO_SOUND_MONO)
3883 con = 0x00060000;
3884 if (con != 0xffffff) {
3885 gpio_bits(0x1e0000,con);
3886 if (bttv_gpio)
3887 bttv_gpio_tracking(btv, "adtvk503");
3888 }
3889 } else {
3890 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3891 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3892 }
3893}
3894
3895/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
3896 *
3897 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
3898 * switch instead (CD22M3494E). This IC can have multiple active connections
3899 * between Xn (input) and Yn (output) pins. We need to clear any existing
3900 * connection prior to establish a new one, pulsing the STROBE pin.
3901 *
3902 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
3903 * GPIO pins are wired as:
3904 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
3905 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
3906 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
3907 * GPIO[8] - - P3[5] (microcontroler)
3908 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
3909 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
3910 * GPINTR - - P3[4] (microcontroler)
3911 *
3912 * The microcontroler is a 80C32 like. It should be possible to change xpoint
3913 * configuration either directly (as we are doing) or using the microcontroler
3914 * which is also wired to I2C interface. I have no further info on the
3915 * microcontroler features, one would need to disassembly the firmware.
3916 * note: the vendor refused to give any information on this product, all
3917 * that stuff was found using a multimeter! :)
3918 */
3919static void rv605_muxsel(struct bttv *btv, unsigned int input)
3920{
3921 /* reset all conections */
3922 gpio_bits(0x200,0x200);
3923 mdelay(1);
3924 gpio_bits(0x200,0x000);
3925 mdelay(1);
3926
3927 /* create a new conection */
3928 gpio_bits(0x480,0x080);
3929 gpio_bits(0x480,0x480);
3930 mdelay(1);
3931 gpio_bits(0x480,0x080);
3932 mdelay(1);
3933}
3934
3935/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
3936 *
3937 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
3938 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
3939 * chips, ten eight input analog multiplexors, a not chip and a few
3940 * other components.
3941 *
3942 * 16 inputs on a secondary bracket are provided and can be selected
3943 * from each of the four capture chips. Two of the eight input
3944 * multiplexors are used to select from any of the 16 input signals.
3945 *
3946 * Unsupported hardware capabilities:
3947 * . A video output monitor on the secondary bracket can be selected from
3948 * one of the 878A chips.
3949 * . Another passthrough but I haven't spent any time investigating it.
3950 * . Digital I/O (logic level connected to GPIO) is available from an
3951 * onboard header.
3952 *
3953 * The on chip input mux should always be set to 2.
3954 * GPIO[16:19] - Video input selection
3955 * GPIO[0:3] - Video output monitor select (only available from one 878A)
3956 * GPIO[?:?] - Digital I/O.
3957 *
3958 * There is an ATMEL microcontroller with an 8031 core on board. I have not
3959 * determined what function (if any) it provides. With the microcontroller
3960 * and sync seperator chips a guess is that it might have to do with video
3961 * switching and maybe some digital I/O.
3962 */
3963static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
3964{
3965 /* video mux */
3966 gpio_bits(0x0f0000, input << 16);
3967}
3968
3969static void tibetCS16_init(struct bttv *btv)
3970{
3971 /* enable gpio bits, mask obtained via btSpy */
3972 gpio_inout(0xffffff, 0x0f7fff);
3973 gpio_write(0x0f7fff);
3974}
3975
3976/*
3977 * The following routines for the Kodicom-4400r get a little mind-twisting.
3978 * There is a "master" controller and three "slave" controllers, together
3979 * an analog switch which connects any of 16 cameras to any of the BT87A's.
3980 * The analog switch is controlled by the "master", but the detection order
3981 * of the four BT878A chips is in an order which I just don't understand.
3982 * The "master" is actually the second controller to be detected. The
3983 * logic on the board uses logical numbers for the 4 controlers, but
3984 * those numbers are different from the detection sequence. When working
3985 * with the analog switch, we need to "map" from the detection sequence
3986 * over to the board's logical controller number. This mapping sequence
3987 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
3988 * unit 3, the second (which is the master) is logical unit 0, etc.
3989 * We need to maintain the status of the analog switch (which of the 16
3990 * cameras is connected to which of the 4 controllers). Rather than
3991 * add to the bttv structure for this, we use the data reserved for
3992 * the mbox (unused for this card type).
3993 */
3994
3995/*
3996 * First a routine to set the analog switch, which controls which camera
3997 * is routed to which controller. The switch comprises an X-address
3998 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
3999 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4000 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4001 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4002 * specified address. The idea is to set the address and data, then bring
4003 * STROBE high, and finally bring STROBE back to low.
4004 */
4005static void kodicom4400r_write(struct bttv *btv,
4006 unsigned char xaddr,
4007 unsigned char yaddr,
4008 unsigned char data) {
4009 unsigned int udata;
4010
4011 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4012 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4013 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4014 gpio_bits(0x1ff, udata); /* strobe low */
4015}
4016
4017/*
4018 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4019 * use this routine. The routine finds the "master" for the card, maps
4020 * the controller number from the detected position over to the logical
4021 * number, writes the appropriate data to the analog switch, and housekeeps
4022 * the local copy of the switch information. The parameter 'input' is the
4023 * requested camera number (0 - 15).
4024 */
4025static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4026{
4027 char *sw_status;
4028 int xaddr, yaddr;
4029 struct bttv *mctlr;
4030 static unsigned char map[4] = {3, 0, 2, 1};
4031
4032 mctlr = master[btv->c.nr];
4033 if (mctlr == NULL) { /* ignore if master not yet detected */
4034 return;
4035 }
4036 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4037 yaddr = map[yaddr];
4038 sw_status = (char *)(&mctlr->mbox_we);
4039 xaddr = input & 0xf;
4040 /* Check if the controller/camera pair has changed, else ignore */
4041 if (sw_status[yaddr] != xaddr)
4042 {
4043 /* "open" the old switch, "close" the new one, save the new */
4044 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4045 sw_status[yaddr] = xaddr;
4046 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4047 }
4048}
4049
4050/*
4051 * During initialisation, we need to reset the analog switch. We
4052 * also preset the switch to map the 4 connectors on the card to the
4053 * *user's* (see above description of kodicom4400r_muxsel) channels
4054 * 0 through 3
4055 */
4056static void kodicom4400r_init(struct bttv *btv)
4057{
4058 char *sw_status = (char *)(&btv->mbox_we);
4059 int ix;
4060
4061 gpio_inout(0x0003ff, 0x0003ff);
4062 gpio_write(1 << 9); /* reset MUX */
4063 gpio_write(0);
4064 /* Preset camera 0 to the 4 controllers */
4065 for (ix=0; ix<4; ix++) {
4066 sw_status[ix] = ix;
4067 kodicom4400r_write(btv, ix, ix, 1);
4068 }
4069 /*
4070 * Since this is the "master", we need to set up the
4071 * other three controller chips' pointers to this structure
4072 * for later use in the muxsel routine.
4073 */
4074 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4075 return;
4076 master[btv->c.nr-1] = btv;
4077 master[btv->c.nr] = btv;
4078 master[btv->c.nr+1] = btv;
4079 master[btv->c.nr+2] = btv;
4080}
4081
4082// The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4083// video multiplexers to provide up to 16 video inputs. These
4084// multiplexers are controlled by the lower 8 GPIO pins of the
4085// bt878. The multiplexers probably Pericom PI5V331Q or similar.
4086
4087// xxx0 is pin xxx of multiplexer U5,
4088// yyy1 is pin yyy of multiplexer U2
4089
4090#define ENA0 0x01
4091#define ENB0 0x02
4092#define ENA1 0x04
4093#define ENB1 0x08
4094
4095#define IN10 0x10
4096#define IN00 0x20
4097#define IN11 0x40
4098#define IN01 0x80
4099
4100static void xguard_muxsel(struct bttv *btv, unsigned int input)
4101{
4102 static const int masks[] = {
4103 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4104 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4105 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4106 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4107 };
4108 gpio_write(masks[input%16]);
4109}
4110static void picolo_tetra_init(struct bttv *btv)
4111{
4112 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4113 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4114 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4115}
4116static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4117{
4118
4119 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4120 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4121 /*GPIO[20]&GPIO[21] used to choose the right input*/
4122 btwrite (input<<20,BT848_GPIO_DATA);
4123
4124}
4125
4126/*
4127 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4128 *
4129 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4130 * swichers to provide 16 channels to MUX0. The TDA8540's have
4131 * 4 indepedant outputs and as such the IVC120G also has the
4132 * optional "Monitor Out" bus. This allows the card to be looking
4133 * at one input while the monitor is looking at another.
4134 *
4135 * Since I've couldn't be bothered figuring out how to add an
4136 * independant muxsel for the monitor bus, I've just set it to
4137 * whatever the card is looking at.
4138 *
4139 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4140 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4141 *
4142 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4143 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4144 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4145 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4146 *
4147 */
4148
4149/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4150#define I2C_TDA8540 0x90
4151#define I2C_TDA8540_ALT1 0x92
4152#define I2C_TDA8540_ALT2 0x94
4153#define I2C_TDA8540_ALT3 0x96
4154#define I2C_TDA8540_ALT4 0x98
4155#define I2C_TDA8540_ALT5 0x9a
4156#define I2C_TDA8540_ALT6 0x9c
4157
4158static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4159{
4160 // Simple maths
4161 int key = input % 4;
4162 int matrix = input / 4;
4163
4164 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4165 btv->c.nr, input, matrix, key);
4166
4167 // Handles the input selection on the TDA8540's
4168 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4169 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4170 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4171 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4172 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4173 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4174 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4175 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4176
4177 // Handles the output enables on the TDA8540's
4178 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4179 ((matrix == 3) ? 0x03 : 0x00), 1); // 13 - 16
4180 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4181 ((matrix == 0) ? 0x03 : 0x00), 1); // 1-4
4182 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4183 ((matrix == 1) ? 0x03 : 0x00), 1); // 5-8
4184 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4185 ((matrix == 2) ? 0x03 : 0x00), 1); // 9-12
4186
4187 // Selects MUX0 for input on the 878
4188 btaor((0)<<5, ~(3<<5), BT848_IFORM);
4189}
4190
4191
4192/* PXC200 muxsel helper
4193 * luke@syseng.anu.edu.au
4194 * another transplant
4195 * from Alessandro Rubini (rubini@linux.it)
4196 *
4197 * There are 4 kinds of cards:
4198 * PXC200L which is bt848
4199 * PXC200F which is bt848 with PIC controlling mux
4200 * PXC200AL which is bt878
4201 * PXC200AF which is bt878 with PIC controlling mux
4202 */
4203#define PX_CFG_PXC200F 0x01
4204#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4205#define PX_I2C_PIC 0x0f
4206#define PX_PXC200A_CARDID 0x200a1295
4207#define PX_I2C_CMD_CFG 0x00
4208
4209static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4210{
4211 int rc;
4212 long mux;
4213 int bitmask;
4214 unsigned char buf[2];
4215
4216 /* Read PIC config to determine if this is a PXC200F */
4217 /* PX_I2C_CMD_CFG*/
4218 buf[0]=0;
4219 buf[1]=0;
4220 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4221 if (rc) {
4222 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4223 /* not PXC ? do nothing */
4224 return;
4225 }
4226
4227 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4228 if (!(rc & PX_CFG_PXC200F)) {
4229 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4230 return;
4231 }
4232
4233
4234 /* The multiplexer in the 200F is handled by the GPIO port */
4235 /* get correct mapping between inputs */
4236 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4237 /* ** not needed!? */
4238 mux = input;
4239
4240 /* make sure output pins are enabled */
4241 /* bitmask=0x30f; */
4242 bitmask=0x302;
4243 /* check whether we have a PXC200A */
4244 if (btv->cardid == PX_PXC200A_CARDID) {
4245 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4246 bitmask |= 7<<4; /* the DAC */
4247 }
4248 btwrite(bitmask, BT848_GPIO_OUT_EN);
4249
4250 bitmask = btread(BT848_GPIO_DATA);
4251 if (btv->cardid == PX_PXC200A_CARDID)
4252 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4253 else /* older device */
4254 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4255 btwrite(bitmask,BT848_GPIO_DATA);
4256
4257 /*
4258 * Was "to be safe, set the bt848 to input 0"
4259 * Actually, since it's ok at load time, better not messing
4260 * with these bits (on PXC200AF you need to set mux 2 here)
4261 *
4262 * needed because bttv-driver sets mux before calling this function
4263 */
4264 if (btv->cardid == PX_PXC200A_CARDID)
4265 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4266 else /* older device */
4267 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4268
4269 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4270}
4271
4272/* ----------------------------------------------------------------------- */
4273/* motherboard chipset specific stuff */
4274
4275void __devinit bttv_check_chipset(void)
4276{
4277 int pcipci_fail = 0;
4278 struct pci_dev *dev = NULL;
4279
4280 if (pci_pci_problems & PCIPCI_FAIL)
4281 pcipci_fail = 1;
4282 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4283 triton1 = 1;
4284 if (pci_pci_problems & PCIPCI_VSFX)
4285 vsfx = 1;
4286#ifdef PCIPCI_ALIMAGIK
4287 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4288 latency = 0x0A;
4289#endif
4290
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]4291
4292 /* print warnings about any quirks found */
4293 if (triton1)
4294 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4295 if (vsfx)
4296 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4297 if (pcipci_fail) {
4298 printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
Mauro Carvalho Chehab4dcef522005-08-04 12:53:30 -0700[diff] [blame^]4299 if (!no_overlay) {
4300 printk(KERN_WARNING "bttv: overlay will be disabled.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]4301 no_overlay = 1;
Mauro Carvalho Chehab4dcef522005-08-04 12:53:30 -0700[diff] [blame^]4302 } else {
4303 printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]4304 }
4305 }
4306 if (UNSET != latency)
4307 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4308
4309 while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL,
4310 PCI_DEVICE_ID_INTEL_82441, dev))) {
4311 unsigned char b;
4312 pci_read_config_byte(dev, 0x53, &b);
4313 if (bttv_debug)
4314 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4315 "bufcon=0x%02x\n",b);
4316 }
4317}
4318
4319int __devinit bttv_handle_chipset(struct bttv *btv)
4320{
4321 unsigned char command;
4322
4323 if (!triton1 && !vsfx && UNSET == latency)
4324 return 0;
4325
4326 if (bttv_verbose) {
4327 if (triton1)
4328 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4329 if (vsfx && btv->id >= 878)
4330 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4331 if (UNSET != latency)
4332 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4333 btv->c.nr,latency);
4334 }
4335
4336 if (btv->id < 878) {
4337 /* bt848 (mis)uses a bit in the irq mask for etbf */
4338 if (triton1)
4339 btv->triton1 = BT848_INT_ETBF;
4340 } else {
4341 /* bt878 has a bit in the pci config space for it */
4342 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4343 if (triton1)
4344 command |= BT878_EN_TBFX;
4345 if (vsfx)
4346 command |= BT878_EN_VSFX;
4347 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4348 }
4349 if (UNSET != latency)
4350 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4351 return 0;
4352}
4353
4354
4355/*
4356 * Local variables:
4357 * c-basic-offset: 8
4358 * End:
4359 */