Daniel Scheller | 3c4e041 | 2017-07-09 15:42:43 -0400 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2011-2013 MaxLinear, Inc. All rights reserved |
| 3 | * |
| 4 | * License type: GPLv2 |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify it under |
| 7 | * the terms of the GNU General Public License as published by the Free Software |
| 8 | * Foundation. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, but WITHOUT |
| 11 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS |
| 12 | * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. |
| 13 | * |
| 14 | * This program may alternatively be licensed under a proprietary license from |
| 15 | * MaxLinear, Inc. |
| 16 | * |
| 17 | */ |
| 18 | |
| 19 | #ifndef __MXL58X_REGISTERS_H__ |
| 20 | #define __MXL58X_REGISTERS_H__ |
| 21 | |
| 22 | #define HYDRA_INTR_STATUS_REG 0x80030008 |
| 23 | #define HYDRA_INTR_MASK_REG 0x8003000C |
| 24 | |
| 25 | #define HYDRA_CRYSTAL_SETTING 0x3FFFC5F0 /* 0 - 24 MHz & 1 - 27 MHz */ |
| 26 | #define HYDRA_CRYSTAL_CAP 0x3FFFEDA4 /* 0 - 24 MHz & 1 - 27 MHz */ |
| 27 | |
| 28 | #define HYDRA_CPU_RESET_REG 0x8003003C |
| 29 | #define HYDRA_CPU_RESET_DATA 0x00000400 |
| 30 | |
| 31 | #define HYDRA_RESET_TRANSPORT_FIFO_REG 0x80030028 |
| 32 | #define HYDRA_RESET_TRANSPORT_FIFO_DATA 0x00000000 |
| 33 | |
| 34 | #define HYDRA_RESET_BBAND_REG 0x80030024 |
| 35 | #define HYDRA_RESET_BBAND_DATA 0x00000000 |
| 36 | |
| 37 | #define HYDRA_RESET_XBAR_REG 0x80030020 |
| 38 | #define HYDRA_RESET_XBAR_DATA 0x00000000 |
| 39 | |
| 40 | #define HYDRA_MODULES_CLK_1_REG 0x80030014 |
| 41 | #define HYDRA_DISABLE_CLK_1 0x00000000 |
| 42 | |
| 43 | #define HYDRA_MODULES_CLK_2_REG 0x8003001C |
| 44 | #define HYDRA_DISABLE_CLK_2 0x0000000B |
| 45 | |
| 46 | #define HYDRA_PRCM_ROOT_CLK_REG 0x80030018 |
| 47 | #define HYDRA_PRCM_ROOT_CLK_DISABLE 0x00000000 |
| 48 | |
| 49 | #define HYDRA_CPU_RESET_CHECK_REG 0x80030008 |
| 50 | #define HYDRA_CPU_RESET_CHECK_OFFSET 0x40000000 /* <bit 30> */ |
| 51 | |
| 52 | #define HYDRA_SKU_ID_REG 0x90000190 |
| 53 | |
| 54 | #define FW_DL_SIGN_ADDR 0x3FFFEAE0 |
| 55 | |
| 56 | /* Register to check if FW is running or not */ |
| 57 | #define HYDRA_HEAR_BEAT 0x3FFFEDDC |
| 58 | |
| 59 | /* Firmware version */ |
| 60 | #define HYDRA_FIRMWARE_VERSION 0x3FFFEDB8 |
| 61 | #define HYDRA_FW_RC_VERSION 0x3FFFCFAC |
| 62 | |
| 63 | /* Firmware patch version */ |
| 64 | #define HYDRA_FIRMWARE_PATCH_VERSION 0x3FFFEDC2 |
| 65 | |
| 66 | /* SOC operating temperature in C */ |
| 67 | #define HYDRA_TEMPARATURE 0x3FFFEDB4 |
| 68 | |
| 69 | /* Demod & Tuner status registers */ |
| 70 | /* Demod 0 status base address */ |
| 71 | #define HYDRA_DEMOD_0_BASE_ADDR 0x3FFFC64C |
| 72 | |
| 73 | /* Tuner 0 status base address */ |
| 74 | #define HYDRA_TUNER_0_BASE_ADDR 0x3FFFCE4C |
| 75 | |
| 76 | #define POWER_FROM_ADCRSSI_READBACK 0x3FFFEB6C |
| 77 | |
| 78 | /* Macros to determine base address of respective demod or tuner */ |
| 79 | #define HYDRA_DMD_STATUS_OFFSET(demodID) ((demodID) * 0x100) |
| 80 | #define HYDRA_TUNER_STATUS_OFFSET(tunerID) ((tunerID) * 0x40) |
| 81 | |
| 82 | /* Demod status address offset from respective demod's base address */ |
| 83 | #define HYDRA_DMD_AGC_DIG_LEVEL_ADDR_OFFSET 0x3FFFC64C |
| 84 | #define HYDRA_DMD_LOCK_STATUS_ADDR_OFFSET 0x3FFFC650 |
| 85 | #define HYDRA_DMD_ACQ_STATUS_ADDR_OFFSET 0x3FFFC654 |
| 86 | |
| 87 | #define HYDRA_DMD_STANDARD_ADDR_OFFSET 0x3FFFC658 |
| 88 | #define HYDRA_DMD_SPECTRUM_INVERSION_ADDR_OFFSET 0x3FFFC65C |
| 89 | #define HYDRA_DMD_SPECTRUM_ROLL_OFF_ADDR_OFFSET 0x3FFFC660 |
| 90 | #define HYDRA_DMD_SYMBOL_RATE_ADDR_OFFSET 0x3FFFC664 |
| 91 | #define HYDRA_DMD_MODULATION_SCHEME_ADDR_OFFSET 0x3FFFC668 |
| 92 | #define HYDRA_DMD_FEC_CODE_RATE_ADDR_OFFSET 0x3FFFC66C |
| 93 | |
| 94 | #define HYDRA_DMD_SNR_ADDR_OFFSET 0x3FFFC670 |
| 95 | #define HYDRA_DMD_FREQ_OFFSET_ADDR_OFFSET 0x3FFFC674 |
| 96 | #define HYDRA_DMD_CTL_FREQ_OFFSET_ADDR_OFFSET 0x3FFFC678 |
| 97 | #define HYDRA_DMD_STR_FREQ_OFFSET_ADDR_OFFSET 0x3FFFC67C |
| 98 | #define HYDRA_DMD_FTL_FREQ_OFFSET_ADDR_OFFSET 0x3FFFC680 |
| 99 | #define HYDRA_DMD_STR_NBC_SYNC_LOCK_ADDR_OFFSET 0x3FFFC684 |
| 100 | #define HYDRA_DMD_CYCLE_SLIP_COUNT_ADDR_OFFSET 0x3FFFC688 |
| 101 | |
| 102 | #define HYDRA_DMD_DISPLAY_I_ADDR_OFFSET 0x3FFFC68C |
| 103 | #define HYDRA_DMD_DISPLAY_Q_ADDR_OFFSET 0x3FFFC68E |
| 104 | |
| 105 | #define HYDRA_DMD_DVBS2_CRC_ERRORS_ADDR_OFFSET 0x3FFFC690 |
| 106 | #define HYDRA_DMD_DVBS2_PER_COUNT_ADDR_OFFSET 0x3FFFC694 |
| 107 | #define HYDRA_DMD_DVBS2_PER_WINDOW_ADDR_OFFSET 0x3FFFC698 |
| 108 | |
| 109 | #define HYDRA_DMD_DVBS_CORR_RS_ERRORS_ADDR_OFFSET 0x3FFFC69C |
| 110 | #define HYDRA_DMD_DVBS_UNCORR_RS_ERRORS_ADDR_OFFSET 0x3FFFC6A0 |
| 111 | #define HYDRA_DMD_DVBS_BER_COUNT_ADDR_OFFSET 0x3FFFC6A4 |
| 112 | #define HYDRA_DMD_DVBS_BER_WINDOW_ADDR_OFFSET 0x3FFFC6A8 |
| 113 | |
| 114 | /* Debug-purpose DVB-S DMD 0 */ |
| 115 | #define HYDRA_DMD_DVBS_1ST_CORR_RS_ERRORS_ADDR_OFFSET 0x3FFFC6C8 /* corrected RS Errors: 1st iteration */ |
| 116 | #define HYDRA_DMD_DVBS_1ST_UNCORR_RS_ERRORS_ADDR_OFFSET 0x3FFFC6CC /* uncorrected RS Errors: 1st iteration */ |
| 117 | #define HYDRA_DMD_DVBS_BER_COUNT_1ST_ADDR_OFFSET 0x3FFFC6D0 |
| 118 | #define HYDRA_DMD_DVBS_BER_WINDOW_1ST_ADDR_OFFSET 0x3FFFC6D4 |
| 119 | |
| 120 | #define HYDRA_DMD_TUNER_ID_ADDR_OFFSET 0x3FFFC6AC |
| 121 | #define HYDRA_DMD_DVBS2_PILOT_ON_OFF_ADDR_OFFSET 0x3FFFC6B0 |
| 122 | #define HYDRA_DMD_FREQ_SEARCH_RANGE_KHZ_ADDR_OFFSET 0x3FFFC6B4 |
| 123 | #define HYDRA_DMD_STATUS_LOCK_ADDR_OFFSET 0x3FFFC6B8 |
| 124 | #define HYDRA_DMD_STATUS_CENTER_FREQ_IN_KHZ_ADDR 0x3FFFC704 |
| 125 | #define HYDRA_DMD_STATUS_INPUT_POWER_ADDR 0x3FFFC708 |
| 126 | |
| 127 | /* DVB-S new scaled_BER_count for a new BER API, see HYDRA-1343 "DVB-S post viterbi information" */ |
| 128 | #define DMD0_STATUS_DVBS_1ST_SCALED_BER_COUNT_ADDR 0x3FFFC710 /* DMD 0: 1st iteration BER count scaled by HYDRA_BER_COUNT_SCALING_FACTOR */ |
| 129 | #define DMD0_STATUS_DVBS_SCALED_BER_COUNT_ADDR 0x3FFFC714 /* DMD 0: 2nd iteration BER count scaled by HYDRA_BER_COUNT_SCALING_FACTOR */ |
| 130 | |
| 131 | #define DMD0_SPECTRUM_MIN_GAIN_STATUS 0x3FFFC73C |
| 132 | #define DMD0_SPECTRUM_MIN_GAIN_WB_SAGC_VALUE 0x3FFFC740 |
| 133 | #define DMD0_SPECTRUM_MIN_GAIN_NB_SAGC_VALUE 0x3FFFC744 |
| 134 | |
| 135 | #define HYDRA_DMD_STATUS_END_ADDR_OFFSET 0x3FFFC748 |
| 136 | |
| 137 | /* Tuner status address offset from respective tuners's base address */ |
| 138 | #define HYDRA_TUNER_DEMOD_ID_ADDR_OFFSET 0x3FFFCE4C |
| 139 | #define HYDRA_TUNER_AGC_LOCK_OFFSET 0x3FFFCE50 |
| 140 | #define HYDRA_TUNER_SPECTRUM_STATUS_OFFSET 0x3FFFCE54 |
| 141 | #define HYDRA_TUNER_SPECTRUM_BIN_SIZE_OFFSET 0x3FFFCE58 |
| 142 | #define HYDRA_TUNER_SPECTRUM_ADDRESS_OFFSET 0x3FFFCE5C |
| 143 | #define HYDRA_TUNER_ENABLE_COMPLETE 0x3FFFEB78 |
| 144 | |
| 145 | #define HYDRA_DEMOD_STATUS_LOCK(devId, demodId) write_register(devId, (HYDRA_DMD_STATUS_LOCK_ADDR_OFFSET + HYDRA_DMD_STATUS_OFFSET(demodId)), MXL_YES) |
| 146 | #define HYDRA_DEMOD_STATUS_UNLOCK(devId, demodId) write_register(devId, (HYDRA_DMD_STATUS_LOCK_ADDR_OFFSET + HYDRA_DMD_STATUS_OFFSET(demodId)), MXL_NO) |
| 147 | |
| 148 | #define HYDRA_VERSION 0x3FFFEDB8 |
| 149 | #define HYDRA_DEMOD0_VERSION 0x3FFFEDBC |
| 150 | #define HYDRA_DEMOD1_VERSION 0x3FFFEDC0 |
| 151 | #define HYDRA_DEMOD2_VERSION 0x3FFFEDC4 |
| 152 | #define HYDRA_DEMOD3_VERSION 0x3FFFEDC8 |
| 153 | #define HYDRA_DEMOD4_VERSION 0x3FFFEDCC |
| 154 | #define HYDRA_DEMOD5_VERSION 0x3FFFEDD0 |
| 155 | #define HYDRA_DEMOD6_VERSION 0x3FFFEDD4 |
| 156 | #define HYDRA_DEMOD7_VERSION 0x3FFFEDD8 |
| 157 | #define HYDRA_HEAR_BEAT 0x3FFFEDDC |
| 158 | #define HYDRA_SKU_MGMT 0x3FFFEBC0 |
| 159 | |
| 160 | #define MXL_HYDRA_FPGA_A_ADDRESS 0x91C00000 |
| 161 | #define MXL_HYDRA_FPGA_B_ADDRESS 0x91D00000 |
| 162 | |
| 163 | /* TS control base address */ |
| 164 | #define HYDRA_TS_CTRL_BASE_ADDR 0x90700000 |
| 165 | |
| 166 | #define MPEG_MUX_MODE_SLICE0_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x08) |
| 167 | |
| 168 | #define MPEG_MUX_MODE_SLICE1_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x08) |
| 169 | |
| 170 | #define PID_BANK_SEL_SLICE0_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x190) |
| 171 | #define PID_BANK_SEL_SLICE1_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x1B0) |
| 172 | |
| 173 | #define MPEG_CLK_GATED_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x20) |
| 174 | |
| 175 | #define MPEG_CLK_ALWAYS_ON_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x1D4) |
| 176 | |
| 177 | #define HYDRA_REGULAR_PID_BANK_A_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x190) |
| 178 | |
| 179 | #define HYDRA_FIXED_PID_BANK_A_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x190) |
| 180 | |
| 181 | #define HYDRA_REGULAR_PID_BANK_B_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x1B0) |
| 182 | |
| 183 | #define HYDRA_FIXED_PID_BANK_B_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x1B0) |
| 184 | |
| 185 | #define FIXED_PID_TBL_REG_ADDRESS_0 (HYDRA_TS_CTRL_BASE_ADDR + 0x9000) |
| 186 | #define FIXED_PID_TBL_REG_ADDRESS_1 (HYDRA_TS_CTRL_BASE_ADDR + 0x9100) |
| 187 | #define FIXED_PID_TBL_REG_ADDRESS_2 (HYDRA_TS_CTRL_BASE_ADDR + 0x9200) |
| 188 | #define FIXED_PID_TBL_REG_ADDRESS_3 (HYDRA_TS_CTRL_BASE_ADDR + 0x9300) |
| 189 | |
| 190 | #define FIXED_PID_TBL_REG_ADDRESS_4 (HYDRA_TS_CTRL_BASE_ADDR + 0xB000) |
| 191 | #define FIXED_PID_TBL_REG_ADDRESS_5 (HYDRA_TS_CTRL_BASE_ADDR + 0xB100) |
| 192 | #define FIXED_PID_TBL_REG_ADDRESS_6 (HYDRA_TS_CTRL_BASE_ADDR + 0xB200) |
| 193 | #define FIXED_PID_TBL_REG_ADDRESS_7 (HYDRA_TS_CTRL_BASE_ADDR + 0xB300) |
| 194 | |
| 195 | #define REGULAR_PID_TBL_REG_ADDRESS_0 (HYDRA_TS_CTRL_BASE_ADDR + 0x8000) |
| 196 | #define REGULAR_PID_TBL_REG_ADDRESS_1 (HYDRA_TS_CTRL_BASE_ADDR + 0x8200) |
| 197 | #define REGULAR_PID_TBL_REG_ADDRESS_2 (HYDRA_TS_CTRL_BASE_ADDR + 0x8400) |
| 198 | #define REGULAR_PID_TBL_REG_ADDRESS_3 (HYDRA_TS_CTRL_BASE_ADDR + 0x8600) |
| 199 | |
| 200 | #define REGULAR_PID_TBL_REG_ADDRESS_4 (HYDRA_TS_CTRL_BASE_ADDR + 0xA000) |
| 201 | #define REGULAR_PID_TBL_REG_ADDRESS_5 (HYDRA_TS_CTRL_BASE_ADDR + 0xA200) |
| 202 | #define REGULAR_PID_TBL_REG_ADDRESS_6 (HYDRA_TS_CTRL_BASE_ADDR + 0xA400) |
| 203 | #define REGULAR_PID_TBL_REG_ADDRESS_7 (HYDRA_TS_CTRL_BASE_ADDR + 0xA600) |
| 204 | |
| 205 | /***************************************************************************/ |
| 206 | |
| 207 | #define PAD_MUX_GPIO_00_SYNC_BASEADDR 0x90000188 |
| 208 | |
| 209 | |
| 210 | #define PAD_MUX_UART_RX_C_PINMUX_BASEADDR 0x9000001C |
| 211 | |
| 212 | #define XPT_PACKET_GAP_MIN_BASEADDR 0x90700044 |
| 213 | #define XPT_NCO_COUNT_BASEADDR 0x90700238 |
| 214 | |
| 215 | #define XPT_NCO_COUNT_BASEADDR1 0x9070023C |
| 216 | |
| 217 | /* V2 DigRF status register */ |
| 218 | |
| 219 | #define XPT_PID_BASEADDR 0x90708000 |
| 220 | |
| 221 | #define XPT_PID_REMAP_BASEADDR 0x90708004 |
| 222 | |
| 223 | #define XPT_KNOWN_PID_BASEADDR 0x90709000 |
| 224 | |
| 225 | #define XPT_PID_BASEADDR1 0x9070A000 |
| 226 | |
| 227 | #define XPT_PID_REMAP_BASEADDR1 0x9070A004 |
| 228 | |
| 229 | #define XPT_KNOWN_PID_BASEADDR1 0x9070B000 |
| 230 | |
| 231 | #define XPT_BERT_LOCK_BASEADDR 0x907000B8 |
| 232 | |
| 233 | #define XPT_BERT_BASEADDR 0x907000BC |
| 234 | |
| 235 | #define XPT_BERT_INVERT_BASEADDR 0x907000C0 |
| 236 | |
| 237 | #define XPT_BERT_HEADER_BASEADDR 0x907000C4 |
| 238 | |
| 239 | #define XPT_BERT_BASEADDR1 0x907000C8 |
| 240 | |
| 241 | #define XPT_BERT_BIT_COUNT0_BASEADDR 0x907000CC |
| 242 | |
| 243 | #define XPT_BERT_BIT_COUNT0_BASEADDR1 0x907000D0 |
| 244 | |
| 245 | #define XPT_BERT_BIT_COUNT1_BASEADDR 0x907000D4 |
| 246 | |
| 247 | #define XPT_BERT_BIT_COUNT1_BASEADDR1 0x907000D8 |
| 248 | |
| 249 | #define XPT_BERT_BIT_COUNT2_BASEADDR 0x907000DC |
| 250 | |
| 251 | #define XPT_BERT_BIT_COUNT2_BASEADDR1 0x907000E0 |
| 252 | |
| 253 | #define XPT_BERT_BIT_COUNT3_BASEADDR 0x907000E4 |
| 254 | |
| 255 | #define XPT_BERT_BIT_COUNT3_BASEADDR1 0x907000E8 |
| 256 | |
| 257 | #define XPT_BERT_BIT_COUNT4_BASEADDR 0x907000EC |
| 258 | |
| 259 | #define XPT_BERT_BIT_COUNT4_BASEADDR1 0x907000F0 |
| 260 | |
| 261 | #define XPT_BERT_BIT_COUNT5_BASEADDR 0x907000F4 |
| 262 | |
| 263 | #define XPT_BERT_BIT_COUNT5_BASEADDR1 0x907000F8 |
| 264 | |
| 265 | #define XPT_BERT_BIT_COUNT6_BASEADDR 0x907000FC |
| 266 | |
| 267 | #define XPT_BERT_BIT_COUNT6_BASEADDR1 0x90700100 |
| 268 | |
| 269 | #define XPT_BERT_BIT_COUNT7_BASEADDR 0x90700104 |
| 270 | |
| 271 | #define XPT_BERT_BIT_COUNT7_BASEADDR1 0x90700108 |
| 272 | |
| 273 | #define XPT_BERT_ERR_COUNT0_BASEADDR 0x9070010C |
| 274 | |
| 275 | #define XPT_BERT_ERR_COUNT0_BASEADDR1 0x90700110 |
| 276 | |
| 277 | #define XPT_BERT_ERR_COUNT1_BASEADDR 0x90700114 |
| 278 | |
| 279 | #define XPT_BERT_ERR_COUNT1_BASEADDR1 0x90700118 |
| 280 | |
| 281 | #define XPT_BERT_ERR_COUNT2_BASEADDR 0x9070011C |
| 282 | |
| 283 | #define XPT_BERT_ERR_COUNT2_BASEADDR1 0x90700120 |
| 284 | |
| 285 | #define XPT_BERT_ERR_COUNT3_BASEADDR 0x90700124 |
| 286 | |
| 287 | #define XPT_BERT_ERR_COUNT3_BASEADDR1 0x90700128 |
| 288 | |
| 289 | #define XPT_BERT_ERR_COUNT4_BASEADDR 0x9070012C |
| 290 | |
| 291 | #define XPT_BERT_ERR_COUNT4_BASEADDR1 0x90700130 |
| 292 | |
| 293 | #define XPT_BERT_ERR_COUNT5_BASEADDR 0x90700134 |
| 294 | |
| 295 | #define XPT_BERT_ERR_COUNT5_BASEADDR1 0x90700138 |
| 296 | |
| 297 | #define XPT_BERT_ERR_COUNT6_BASEADDR 0x9070013C |
| 298 | |
| 299 | #define XPT_BERT_ERR_COUNT6_BASEADDR1 0x90700140 |
| 300 | |
| 301 | #define XPT_BERT_ERR_COUNT7_BASEADDR 0x90700144 |
| 302 | |
| 303 | #define XPT_BERT_ERR_COUNT7_BASEADDR1 0x90700148 |
| 304 | |
| 305 | #define XPT_BERT_ERROR_BASEADDR 0x9070014C |
| 306 | |
| 307 | #define XPT_BERT_ANALYZER_BASEADDR 0x90700150 |
| 308 | |
| 309 | #define XPT_BERT_ANALYZER_BASEADDR1 0x90700154 |
| 310 | |
| 311 | #define XPT_BERT_ANALYZER_BASEADDR2 0x90700158 |
| 312 | |
| 313 | #define XPT_BERT_ANALYZER_BASEADDR3 0x9070015C |
| 314 | |
| 315 | #define XPT_BERT_ANALYZER_BASEADDR4 0x90700160 |
| 316 | |
| 317 | #define XPT_BERT_ANALYZER_BASEADDR5 0x90700164 |
| 318 | |
| 319 | #define XPT_BERT_ANALYZER_BASEADDR6 0x90700168 |
| 320 | |
| 321 | #define XPT_BERT_ANALYZER_BASEADDR7 0x9070016C |
| 322 | |
| 323 | #define XPT_BERT_ANALYZER_BASEADDR8 0x90700170 |
| 324 | |
| 325 | #define XPT_BERT_ANALYZER_BASEADDR9 0x90700174 |
| 326 | |
| 327 | #define XPT_DMD0_BASEADDR 0x9070024C |
| 328 | |
| 329 | /* V2 AGC Gain Freeze & step */ |
| 330 | #define DBG_ENABLE_DISABLE_AGC (0x3FFFCF60) /* 1: DISABLE, 0:ENABLE */ |
| 331 | #define WB_DFE0_DFE_FB_RF1_BASEADDR 0x903004A4 |
| 332 | |
| 333 | #define WB_DFE1_DFE_FB_RF1_BASEADDR 0x904004A4 |
| 334 | |
| 335 | #define WB_DFE2_DFE_FB_RF1_BASEADDR 0x905004A4 |
| 336 | |
| 337 | #define WB_DFE3_DFE_FB_RF1_BASEADDR 0x906004A4 |
| 338 | |
| 339 | #define AFE_REG_D2A_TA_RFFE_LNA_BO_1P8_BASEADDR 0x90200104 |
| 340 | |
| 341 | #define AFE_REG_AFE_REG_SPARE_BASEADDR 0x902000A0 |
| 342 | |
| 343 | #define AFE_REG_AFE_REG_SPARE_BASEADDR1 0x902000B4 |
| 344 | |
| 345 | #define AFE_REG_AFE_REG_SPARE_BASEADDR2 0x902000C4 |
| 346 | |
| 347 | #define AFE_REG_AFE_REG_SPARE_BASEADDR3 0x902000D4 |
| 348 | |
| 349 | #define WB_DFE0_DFE_FB_AGC_BASEADDR 0x90300498 |
| 350 | |
| 351 | #define WB_DFE1_DFE_FB_AGC_BASEADDR 0x90400498 |
| 352 | |
| 353 | #define WB_DFE2_DFE_FB_AGC_BASEADDR 0x90500498 |
| 354 | |
| 355 | #define WB_DFE3_DFE_FB_AGC_BASEADDR 0x90600498 |
| 356 | |
| 357 | #define WDT_WD_INT_BASEADDR 0x8002000C |
| 358 | |
| 359 | #define FSK_TX_FTM_BASEADDR 0x80090000 |
| 360 | |
| 361 | #define FSK_TX_FTM_TX_CNT_BASEADDR 0x80090018 |
| 362 | |
| 363 | #define AFE_REG_D2A_FSK_BIAS_BASEADDR 0x90200040 |
| 364 | |
| 365 | #define DMD_TEI_BASEADDR 0x3FFFEBE0 |
| 366 | |
| 367 | #endif /* __MXL58X_REGISTERS_H__ */ |