blob: a5628a8b66207a4420c99f91565a6746495b14ee [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/char/vt_ioctl.c
3 *
4 * Copyright (C) 1992 obz under the linux copyright
5 *
6 * Dynamic diacritical handling - aeb@cwi.nl - Dec 1993
7 * Dynamic keymap and string allocation - aeb@cwi.nl - May 1994
8 * Restrict VT switching via ioctl() - grif@cs.ucr.edu - Dec 1995
9 * Some code moved for less code duplication - Andi Kleen - Mar 1997
10 * Check put/get_user, cleanups - acme@conectiva.com.br - Jun 2001
11 */
12
Linus Torvalds1da177e2005-04-16 15:20:36 -070013#include <linux/types.h>
14#include <linux/errno.h>
15#include <linux/sched.h>
16#include <linux/tty.h>
17#include <linux/timer.h>
18#include <linux/kernel.h>
19#include <linux/kd.h>
20#include <linux/vt.h>
21#include <linux/string.h>
22#include <linux/slab.h>
23#include <linux/major.h>
24#include <linux/fs.h>
25#include <linux/console.h>
Jesper Juhl7ed20e12005-05-01 08:59:14 -070026#include <linux/signal.h>
Emmanuel Colbusbcc8ca02005-06-28 20:44:49 -070027#include <linux/timex.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070028
29#include <asm/io.h>
30#include <asm/uaccess.h>
31
32#include <linux/kbd_kern.h>
33#include <linux/vt_kern.h>
34#include <linux/kbd_diacr.h>
35#include <linux/selection.h>
36
37static char vt_dont_switch;
38extern struct tty_driver *console_driver;
39
40#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
41#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
42
43/*
44 * Console (vt and kd) routines, as defined by USL SVR4 manual, and by
45 * experimentation and study of X386 SYSV handling.
46 *
47 * One point of difference: SYSV vt's are /dev/vtX, which X >= 0, and
48 * /dev/console is a separate ttyp. Under Linux, /dev/tty0 is /dev/console,
49 * and the vc start at /dev/ttyX, X >= 1. We maintain that here, so we will
50 * always treat our set of vt as numbered 1..MAX_NR_CONSOLES (corresponding to
51 * ttys 0..MAX_NR_CONSOLES-1). Explicitly naming VT 0 is illegal, but using
52 * /dev/tty0 (fg_console) as a target is legal, since an implicit aliasing
53 * to the current console is done by the main ioctl code.
54 */
55
56#ifdef CONFIG_X86
57#include <linux/syscalls.h>
58#endif
59
60static void complete_change_console(struct vc_data *vc);
61
62/*
63 * these are the valid i/o ports we're allowed to change. they map all the
64 * video ports
65 */
66#define GPFIRST 0x3b4
67#define GPLAST 0x3df
68#define GPNUM (GPLAST - GPFIRST + 1)
69
70#define i (tmp.kb_index)
71#define s (tmp.kb_table)
72#define v (tmp.kb_value)
73static inline int
74do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, struct kbd_struct *kbd)
75{
76 struct kbentry tmp;
77 ushort *key_map, val, ov;
78
79 if (copy_from_user(&tmp, user_kbe, sizeof(struct kbentry)))
80 return -EFAULT;
81
Marcelo Tosattie3f17f02005-11-07 00:59:34 -080082 if (!capable(CAP_SYS_TTY_CONFIG))
83 perm = 0;
84
Linus Torvalds1da177e2005-04-16 15:20:36 -070085 switch (cmd) {
86 case KDGKBENT:
87 key_map = key_maps[s];
88 if (key_map) {
89 val = U(key_map[i]);
90 if (kbd->kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES)
91 val = K_HOLE;
92 } else
93 val = (i ? K_HOLE : K_NOSUCHMAP);
94 return put_user(val, &user_kbe->kb_value);
95 case KDSKBENT:
96 if (!perm)
97 return -EPERM;
98 if (!i && v == K_NOSUCHMAP) {
99 /* disallocate map */
100 key_map = key_maps[s];
101 if (s && key_map) {
102 key_maps[s] = NULL;
103 if (key_map[0] == U(K_ALLOCATED)) {
104 kfree(key_map);
105 keymap_count--;
106 }
107 }
108 break;
109 }
110
111 if (KTYP(v) < NR_TYPES) {
112 if (KVAL(v) > max_vals[KTYP(v)])
113 return -EINVAL;
114 } else
115 if (kbd->kbdmode != VC_UNICODE)
116 return -EINVAL;
117
118 /* ++Geert: non-PC keyboards may generate keycode zero */
119#if !defined(__mc68000__) && !defined(__powerpc__)
120 /* assignment to entry 0 only tests validity of args */
121 if (!i)
122 break;
123#endif
124
125 if (!(key_map = key_maps[s])) {
126 int j;
127
128 if (keymap_count >= MAX_NR_OF_USER_KEYMAPS &&
129 !capable(CAP_SYS_RESOURCE))
130 return -EPERM;
131
132 key_map = (ushort *) kmalloc(sizeof(plain_map),
133 GFP_KERNEL);
134 if (!key_map)
135 return -ENOMEM;
136 key_maps[s] = key_map;
137 key_map[0] = U(K_ALLOCATED);
138 for (j = 1; j < NR_KEYS; j++)
139 key_map[j] = U(K_HOLE);
140 keymap_count++;
141 }
142 ov = U(key_map[i]);
143 if (v == ov)
144 break; /* nothing to do */
145 /*
146 * Attention Key.
147 */
148 if (((ov == K_SAK) || (v == K_SAK)) && !capable(CAP_SYS_ADMIN))
149 return -EPERM;
150 key_map[i] = U(v);
151 if (!s && (KTYP(ov) == KT_SHIFT || KTYP(v) == KT_SHIFT))
152 compute_shiftstate();
153 break;
154 }
155 return 0;
156}
157#undef i
158#undef s
159#undef v
160
161static inline int
162do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc, int perm)
163{
164 struct kbkeycode tmp;
165 int kc = 0;
166
167 if (copy_from_user(&tmp, user_kbkc, sizeof(struct kbkeycode)))
168 return -EFAULT;
169 switch (cmd) {
170 case KDGETKEYCODE:
171 kc = getkeycode(tmp.scancode);
172 if (kc >= 0)
173 kc = put_user(kc, &user_kbkc->keycode);
174 break;
175 case KDSETKEYCODE:
176 if (!perm)
177 return -EPERM;
178 kc = setkeycode(tmp.scancode, tmp.keycode);
179 break;
180 }
181 return kc;
182}
183
184static inline int
185do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm)
186{
187 struct kbsentry *kbs;
188 char *p;
189 u_char *q;
190 u_char __user *up;
191 int sz;
192 int delta;
193 char *first_free, *fj, *fnw;
194 int i, j, k;
195 int ret;
196
Andrew Morton0b360ad2005-10-30 15:03:02 -0800197 if (!capable(CAP_SYS_TTY_CONFIG))
Marcelo Tosattie3f17f02005-11-07 00:59:34 -0800198 perm = 0;
Andrew Morton0b360ad2005-10-30 15:03:02 -0800199
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200 kbs = kmalloc(sizeof(*kbs), GFP_KERNEL);
201 if (!kbs) {
202 ret = -ENOMEM;
203 goto reterr;
204 }
205
206 /* we mostly copy too much here (512bytes), but who cares ;) */
207 if (copy_from_user(kbs, user_kdgkb, sizeof(struct kbsentry))) {
208 ret = -EFAULT;
209 goto reterr;
210 }
211 kbs->kb_string[sizeof(kbs->kb_string)-1] = '\0';
212 i = kbs->kb_func;
213
214 switch (cmd) {
215 case KDGKBSENT:
216 sz = sizeof(kbs->kb_string) - 1; /* sz should have been
217 a struct member */
218 up = user_kdgkb->kb_string;
219 p = func_table[i];
220 if(p)
221 for ( ; *p && sz; p++, sz--)
222 if (put_user(*p, up++)) {
223 ret = -EFAULT;
224 goto reterr;
225 }
226 if (put_user('\0', up)) {
227 ret = -EFAULT;
228 goto reterr;
229 }
230 kfree(kbs);
231 return ((p && *p) ? -EOVERFLOW : 0);
232 case KDSKBSENT:
233 if (!perm) {
234 ret = -EPERM;
235 goto reterr;
236 }
237
238 q = func_table[i];
239 first_free = funcbufptr + (funcbufsize - funcbufleft);
240 for (j = i+1; j < MAX_NR_FUNC && !func_table[j]; j++)
241 ;
242 if (j < MAX_NR_FUNC)
243 fj = func_table[j];
244 else
245 fj = first_free;
246
247 delta = (q ? -strlen(q) : 1) + strlen(kbs->kb_string);
248 if (delta <= funcbufleft) { /* it fits in current buf */
249 if (j < MAX_NR_FUNC) {
250 memmove(fj + delta, fj, first_free - fj);
251 for (k = j; k < MAX_NR_FUNC; k++)
252 if (func_table[k])
253 func_table[k] += delta;
254 }
255 if (!q)
256 func_table[i] = fj;
257 funcbufleft -= delta;
258 } else { /* allocate a larger buffer */
259 sz = 256;
260 while (sz < funcbufsize - funcbufleft + delta)
261 sz <<= 1;
262 fnw = (char *) kmalloc(sz, GFP_KERNEL);
263 if(!fnw) {
264 ret = -ENOMEM;
265 goto reterr;
266 }
267
268 if (!q)
269 func_table[i] = fj;
270 if (fj > funcbufptr)
271 memmove(fnw, funcbufptr, fj - funcbufptr);
272 for (k = 0; k < j; k++)
273 if (func_table[k])
274 func_table[k] = fnw + (func_table[k] - funcbufptr);
275
276 if (first_free > fj) {
277 memmove(fnw + (fj - funcbufptr) + delta, fj, first_free - fj);
278 for (k = j; k < MAX_NR_FUNC; k++)
279 if (func_table[k])
280 func_table[k] = fnw + (func_table[k] - funcbufptr) + delta;
281 }
282 if (funcbufptr != func_buf)
283 kfree(funcbufptr);
284 funcbufptr = fnw;
285 funcbufleft = funcbufleft - delta + sz - funcbufsize;
286 funcbufsize = sz;
287 }
288 strcpy(func_table[i], kbs->kb_string);
289 break;
290 }
291 ret = 0;
292reterr:
293 kfree(kbs);
294 return ret;
295}
296
297static inline int
298do_fontx_ioctl(int cmd, struct consolefontdesc __user *user_cfd, int perm, struct console_font_op *op)
299{
300 struct consolefontdesc cfdarg;
301 int i;
302
303 if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc)))
304 return -EFAULT;
305
306 switch (cmd) {
307 case PIO_FONTX:
308 if (!perm)
309 return -EPERM;
310 op->op = KD_FONT_OP_SET;
311 op->flags = KD_FONT_FLAG_OLD;
312 op->width = 8;
313 op->height = cfdarg.charheight;
314 op->charcount = cfdarg.charcount;
315 op->data = cfdarg.chardata;
316 return con_font_op(vc_cons[fg_console].d, op);
317 case GIO_FONTX: {
318 op->op = KD_FONT_OP_GET;
319 op->flags = KD_FONT_FLAG_OLD;
320 op->width = 8;
321 op->height = cfdarg.charheight;
322 op->charcount = cfdarg.charcount;
323 op->data = cfdarg.chardata;
324 i = con_font_op(vc_cons[fg_console].d, op);
325 if (i)
326 return i;
327 cfdarg.charheight = op->height;
328 cfdarg.charcount = op->charcount;
329 if (copy_to_user(user_cfd, &cfdarg, sizeof(struct consolefontdesc)))
330 return -EFAULT;
331 return 0;
332 }
333 }
334 return -EINVAL;
335}
336
337static inline int
338do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_data *vc)
339{
340 struct unimapdesc tmp;
341
342 if (copy_from_user(&tmp, user_ud, sizeof tmp))
343 return -EFAULT;
344 if (tmp.entries)
345 if (!access_ok(VERIFY_WRITE, tmp.entries,
346 tmp.entry_ct*sizeof(struct unipair)))
347 return -EFAULT;
348 switch (cmd) {
349 case PIO_UNIMAP:
350 if (!perm)
351 return -EPERM;
352 return con_set_unimap(vc, tmp.entry_ct, tmp.entries);
353 case GIO_UNIMAP:
354 if (!perm && fg_console != vc->vc_num)
355 return -EPERM;
356 return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct), tmp.entries);
357 }
358 return 0;
359}
360
361/*
362 * We handle the console-specific ioctl's here. We allow the
363 * capability to modify any console, not just the fg_console.
364 */
365int vt_ioctl(struct tty_struct *tty, struct file * file,
366 unsigned int cmd, unsigned long arg)
367{
368 struct vc_data *vc = (struct vc_data *)tty->driver_data;
369 struct console_font_op op; /* used in multiple places here */
370 struct kbd_struct * kbd;
371 unsigned int console;
372 unsigned char ucval;
373 void __user *up = (void __user *)arg;
374 int i, perm;
375
376 console = vc->vc_num;
377
378 if (!vc_cons_allocated(console)) /* impossible? */
379 return -ENOIOCTLCMD;
380
381 /*
382 * To have permissions to do most of the vt ioctls, we either have
383 * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
384 */
385 perm = 0;
386 if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG))
387 perm = 1;
388
389 kbd = kbd_table + console;
390 switch (cmd) {
391 case KIOCSOUND:
392 if (!perm)
393 return -EPERM;
394 if (arg)
Emmanuel Colbusbcc8ca02005-06-28 20:44:49 -0700395 arg = CLOCK_TICK_RATE / arg;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700396 kd_mksound(arg, 0);
397 return 0;
398
399 case KDMKTONE:
400 if (!perm)
401 return -EPERM;
402 {
403 unsigned int ticks, count;
404
405 /*
406 * Generate the tone for the appropriate number of ticks.
407 * If the time is zero, turn off sound ourselves.
408 */
409 ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
410 count = ticks ? (arg & 0xffff) : 0;
411 if (count)
Emmanuel Colbusbcc8ca02005-06-28 20:44:49 -0700412 count = CLOCK_TICK_RATE / count;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700413 kd_mksound(count, ticks);
414 return 0;
415 }
416
417 case KDGKBTYPE:
418 /*
419 * this is naive.
420 */
421 ucval = KB_101;
422 goto setchar;
423
424 /*
425 * These cannot be implemented on any machine that implements
426 * ioperm() in user level (such as Alpha PCs) or not at all.
427 *
428 * XXX: you should never use these, just call ioperm directly..
429 */
430#ifdef CONFIG_X86
431 case KDADDIO:
432 case KDDELIO:
433 /*
434 * KDADDIO and KDDELIO may be able to add ports beyond what
435 * we reject here, but to be safe...
436 */
437 if (arg < GPFIRST || arg > GPLAST)
438 return -EINVAL;
439 return sys_ioperm(arg, 1, (cmd == KDADDIO)) ? -ENXIO : 0;
440
441 case KDENABIO:
442 case KDDISABIO:
443 return sys_ioperm(GPFIRST, GPNUM,
444 (cmd == KDENABIO)) ? -ENXIO : 0;
445#endif
446
447 /* Linux m68k/i386 interface for setting the keyboard delay/repeat rate */
448
449 case KDKBDREP:
450 {
451 struct kbd_repeat kbrep;
452 int err;
453
454 if (!capable(CAP_SYS_TTY_CONFIG))
455 return -EPERM;
456
457 if (copy_from_user(&kbrep, up, sizeof(struct kbd_repeat)))
458 return -EFAULT;
459 err = kbd_rate(&kbrep);
460 if (err)
461 return err;
462 if (copy_to_user(up, &kbrep, sizeof(struct kbd_repeat)))
463 return -EFAULT;
464 return 0;
465 }
466
467 case KDSETMODE:
468 /*
469 * currently, setting the mode from KD_TEXT to KD_GRAPHICS
470 * doesn't do a whole lot. i'm not sure if it should do any
471 * restoration of modes or what...
472 *
473 * XXX It should at least call into the driver, fbdev's definitely
474 * need to restore their engine state. --BenH
475 */
476 if (!perm)
477 return -EPERM;
478 switch (arg) {
479 case KD_GRAPHICS:
480 break;
481 case KD_TEXT0:
482 case KD_TEXT1:
483 arg = KD_TEXT;
484 case KD_TEXT:
485 break;
486 default:
487 return -EINVAL;
488 }
489 if (vc->vc_mode == (unsigned char) arg)
490 return 0;
491 vc->vc_mode = (unsigned char) arg;
492 if (console != fg_console)
493 return 0;
494 /*
495 * explicitly blank/unblank the screen if switching modes
496 */
497 acquire_console_sem();
498 if (arg == KD_TEXT)
499 do_unblank_screen(1);
500 else
501 do_blank_screen(1);
502 release_console_sem();
503 return 0;
504
505 case KDGETMODE:
506 ucval = vc->vc_mode;
507 goto setint;
508
509 case KDMAPDISP:
510 case KDUNMAPDISP:
511 /*
512 * these work like a combination of mmap and KDENABIO.
513 * this could be easily finished.
514 */
515 return -EINVAL;
516
517 case KDSKBMODE:
518 if (!perm)
519 return -EPERM;
520 switch(arg) {
521 case K_RAW:
522 kbd->kbdmode = VC_RAW;
523 break;
524 case K_MEDIUMRAW:
525 kbd->kbdmode = VC_MEDIUMRAW;
526 break;
527 case K_XLATE:
528 kbd->kbdmode = VC_XLATE;
529 compute_shiftstate();
530 break;
531 case K_UNICODE:
532 kbd->kbdmode = VC_UNICODE;
533 compute_shiftstate();
534 break;
535 default:
536 return -EINVAL;
537 }
538 tty_ldisc_flush(tty);
539 return 0;
540
541 case KDGKBMODE:
542 ucval = ((kbd->kbdmode == VC_RAW) ? K_RAW :
543 (kbd->kbdmode == VC_MEDIUMRAW) ? K_MEDIUMRAW :
544 (kbd->kbdmode == VC_UNICODE) ? K_UNICODE :
545 K_XLATE);
546 goto setint;
547
548 /* this could be folded into KDSKBMODE, but for compatibility
549 reasons it is not so easy to fold KDGKBMETA into KDGKBMODE */
550 case KDSKBMETA:
551 switch(arg) {
552 case K_METABIT:
553 clr_vc_kbd_mode(kbd, VC_META);
554 break;
555 case K_ESCPREFIX:
556 set_vc_kbd_mode(kbd, VC_META);
557 break;
558 default:
559 return -EINVAL;
560 }
561 return 0;
562
563 case KDGKBMETA:
564 ucval = (vc_kbd_mode(kbd, VC_META) ? K_ESCPREFIX : K_METABIT);
565 setint:
566 return put_user(ucval, (int __user *)arg);
567
568 case KDGETKEYCODE:
569 case KDSETKEYCODE:
570 if(!capable(CAP_SYS_TTY_CONFIG))
571 perm=0;
572 return do_kbkeycode_ioctl(cmd, up, perm);
573
574 case KDGKBENT:
575 case KDSKBENT:
576 return do_kdsk_ioctl(cmd, up, perm, kbd);
577
578 case KDGKBSENT:
579 case KDSKBSENT:
580 return do_kdgkb_ioctl(cmd, up, perm);
581
582 case KDGKBDIACR:
583 {
584 struct kbdiacrs __user *a = up;
585
586 if (put_user(accent_table_size, &a->kb_cnt))
587 return -EFAULT;
588 if (copy_to_user(a->kbdiacr, accent_table, accent_table_size*sizeof(struct kbdiacr)))
589 return -EFAULT;
590 return 0;
591 }
592
593 case KDSKBDIACR:
594 {
595 struct kbdiacrs __user *a = up;
596 unsigned int ct;
597
598 if (!perm)
599 return -EPERM;
600 if (get_user(ct,&a->kb_cnt))
601 return -EFAULT;
602 if (ct >= MAX_DIACR)
603 return -EINVAL;
604 accent_table_size = ct;
605 if (copy_from_user(accent_table, a->kbdiacr, ct*sizeof(struct kbdiacr)))
606 return -EFAULT;
607 return 0;
608 }
609
610 /* the ioctls below read/set the flags usually shown in the leds */
611 /* don't use them - they will go away without warning */
612 case KDGKBLED:
613 ucval = kbd->ledflagstate | (kbd->default_ledflagstate << 4);
614 goto setchar;
615
616 case KDSKBLED:
617 if (!perm)
618 return -EPERM;
619 if (arg & ~0x77)
620 return -EINVAL;
621 kbd->ledflagstate = (arg & 7);
622 kbd->default_ledflagstate = ((arg >> 4) & 7);
623 set_leds();
624 return 0;
625
626 /* the ioctls below only set the lights, not the functions */
627 /* for those, see KDGKBLED and KDSKBLED above */
628 case KDGETLED:
629 ucval = getledstate();
630 setchar:
631 return put_user(ucval, (char __user *)arg);
632
633 case KDSETLED:
634 if (!perm)
635 return -EPERM;
636 setledstate(kbd, arg);
637 return 0;
638
639 /*
640 * A process can indicate its willingness to accept signals
641 * generated by pressing an appropriate key combination.
642 * Thus, one can have a daemon that e.g. spawns a new console
643 * upon a keypress and then changes to it.
644 * See also the kbrequest field of inittab(5).
645 */
646 case KDSIGACCEPT:
647 {
648 extern int spawnpid, spawnsig;
649 if (!perm || !capable(CAP_KILL))
650 return -EPERM;
Jesper Juhl7ed20e12005-05-01 08:59:14 -0700651 if (!valid_signal(arg) || arg < 1 || arg == SIGKILL)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700652 return -EINVAL;
653 spawnpid = current->pid;
654 spawnsig = arg;
655 return 0;
656 }
657
658 case VT_SETMODE:
659 {
660 struct vt_mode tmp;
661
662 if (!perm)
663 return -EPERM;
664 if (copy_from_user(&tmp, up, sizeof(struct vt_mode)))
665 return -EFAULT;
666 if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS)
667 return -EINVAL;
668 acquire_console_sem();
669 vc->vt_mode = tmp;
670 /* the frsig is ignored, so we set it to 0 */
671 vc->vt_mode.frsig = 0;
672 vc->vt_pid = current->pid;
673 /* no switch is required -- saw@shade.msu.ru */
674 vc->vt_newvt = -1;
675 release_console_sem();
676 return 0;
677 }
678
679 case VT_GETMODE:
680 {
681 struct vt_mode tmp;
682 int rc;
683
684 acquire_console_sem();
685 memcpy(&tmp, &vc->vt_mode, sizeof(struct vt_mode));
686 release_console_sem();
687
688 rc = copy_to_user(up, &tmp, sizeof(struct vt_mode));
689 return rc ? -EFAULT : 0;
690 }
691
692 /*
693 * Returns global vt state. Note that VT 0 is always open, since
694 * it's an alias for the current VT, and people can't use it here.
695 * We cannot return state for more than 16 VTs, since v_state is short.
696 */
697 case VT_GETSTATE:
698 {
699 struct vt_stat __user *vtstat = up;
700 unsigned short state, mask;
701
702 if (put_user(fg_console + 1, &vtstat->v_active))
703 return -EFAULT;
704 state = 1; /* /dev/tty0 is always open */
705 for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask; ++i, mask <<= 1)
706 if (VT_IS_IN_USE(i))
707 state |= mask;
708 return put_user(state, &vtstat->v_state);
709 }
710
711 /*
712 * Returns the first available (non-opened) console.
713 */
714 case VT_OPENQRY:
715 for (i = 0; i < MAX_NR_CONSOLES; ++i)
716 if (! VT_IS_IN_USE(i))
717 break;
718 ucval = i < MAX_NR_CONSOLES ? (i+1) : -1;
719 goto setint;
720
721 /*
722 * ioctl(fd, VT_ACTIVATE, num) will cause us to switch to vt # num,
723 * with num >= 1 (switches to vt 0, our console, are not allowed, just
724 * to preserve sanity).
725 */
726 case VT_ACTIVATE:
727 if (!perm)
728 return -EPERM;
729 if (arg == 0 || arg > MAX_NR_CONSOLES)
730 return -ENXIO;
731 arg--;
732 acquire_console_sem();
733 i = vc_allocate(arg);
734 release_console_sem();
735 if (i)
736 return i;
737 set_console(arg);
738 return 0;
739
740 /*
741 * wait until the specified VT has been activated
742 */
743 case VT_WAITACTIVE:
744 if (!perm)
745 return -EPERM;
746 if (arg == 0 || arg > MAX_NR_CONSOLES)
747 return -ENXIO;
748 return vt_waitactive(arg-1);
749
750 /*
751 * If a vt is under process control, the kernel will not switch to it
752 * immediately, but postpone the operation until the process calls this
753 * ioctl, allowing the switch to complete.
754 *
755 * According to the X sources this is the behavior:
756 * 0: pending switch-from not OK
757 * 1: pending switch-from OK
758 * 2: completed switch-to OK
759 */
760 case VT_RELDISP:
761 if (!perm)
762 return -EPERM;
763 if (vc->vt_mode.mode != VT_PROCESS)
764 return -EINVAL;
765
766 /*
767 * Switching-from response
768 */
769 if (vc->vt_newvt >= 0) {
770 if (arg == 0)
771 /*
772 * Switch disallowed, so forget we were trying
773 * to do it.
774 */
775 vc->vt_newvt = -1;
776
777 else {
778 /*
779 * The current vt has been released, so
780 * complete the switch.
781 */
782 int newvt;
783 acquire_console_sem();
784 newvt = vc->vt_newvt;
785 vc->vt_newvt = -1;
786 i = vc_allocate(newvt);
787 if (i) {
788 release_console_sem();
789 return i;
790 }
791 /*
792 * When we actually do the console switch,
793 * make sure we are atomic with respect to
794 * other console switches..
795 */
796 complete_change_console(vc_cons[newvt].d);
797 release_console_sem();
798 }
799 }
800
801 /*
802 * Switched-to response
803 */
804 else
805 {
806 /*
807 * If it's just an ACK, ignore it
808 */
809 if (arg != VT_ACKACQ)
810 return -EINVAL;
811 }
812
813 return 0;
814
815 /*
816 * Disallocate memory associated to VT (but leave VT1)
817 */
818 case VT_DISALLOCATE:
819 if (arg > MAX_NR_CONSOLES)
820 return -ENXIO;
821 if (arg == 0) {
822 /* disallocate all unused consoles, but leave 0 */
823 acquire_console_sem();
824 for (i=1; i<MAX_NR_CONSOLES; i++)
825 if (! VT_BUSY(i))
826 vc_disallocate(i);
827 release_console_sem();
828 } else {
829 /* disallocate a single console, if possible */
830 arg--;
831 if (VT_BUSY(arg))
832 return -EBUSY;
833 if (arg) { /* leave 0 */
834 acquire_console_sem();
835 vc_disallocate(arg);
836 release_console_sem();
837 }
838 }
839 return 0;
840
841 case VT_RESIZE:
842 {
843 struct vt_sizes __user *vtsizes = up;
844 ushort ll,cc;
845 if (!perm)
846 return -EPERM;
847 if (get_user(ll, &vtsizes->v_rows) ||
848 get_user(cc, &vtsizes->v_cols))
849 return -EFAULT;
850 for (i = 0; i < MAX_NR_CONSOLES; i++) {
851 acquire_console_sem();
852 vc_resize(vc_cons[i].d, cc, ll);
853 release_console_sem();
854 }
855 return 0;
856 }
857
858 case VT_RESIZEX:
859 {
860 struct vt_consize __user *vtconsize = up;
861 ushort ll,cc,vlin,clin,vcol,ccol;
862 if (!perm)
863 return -EPERM;
864 if (!access_ok(VERIFY_READ, vtconsize,
865 sizeof(struct vt_consize)))
866 return -EFAULT;
867 __get_user(ll, &vtconsize->v_rows);
868 __get_user(cc, &vtconsize->v_cols);
869 __get_user(vlin, &vtconsize->v_vlin);
870 __get_user(clin, &vtconsize->v_clin);
871 __get_user(vcol, &vtconsize->v_vcol);
872 __get_user(ccol, &vtconsize->v_ccol);
873 vlin = vlin ? vlin : vc->vc_scan_lines;
874 if (clin) {
875 if (ll) {
876 if (ll != vlin/clin)
877 return -EINVAL; /* Parameters don't add up */
878 } else
879 ll = vlin/clin;
880 }
881 if (vcol && ccol) {
882 if (cc) {
883 if (cc != vcol/ccol)
884 return -EINVAL;
885 } else
886 cc = vcol/ccol;
887 }
888
889 if (clin > 32)
890 return -EINVAL;
891
892 for (i = 0; i < MAX_NR_CONSOLES; i++) {
893 if (!vc_cons[i].d)
894 continue;
895 acquire_console_sem();
896 if (vlin)
897 vc_cons[i].d->vc_scan_lines = vlin;
898 if (clin)
899 vc_cons[i].d->vc_font.height = clin;
900 vc_resize(vc_cons[i].d, cc, ll);
901 release_console_sem();
902 }
903 return 0;
904 }
905
906 case PIO_FONT: {
907 if (!perm)
908 return -EPERM;
909 op.op = KD_FONT_OP_SET;
910 op.flags = KD_FONT_FLAG_OLD | KD_FONT_FLAG_DONT_RECALC; /* Compatibility */
911 op.width = 8;
912 op.height = 0;
913 op.charcount = 256;
914 op.data = up;
915 return con_font_op(vc_cons[fg_console].d, &op);
916 }
917
918 case GIO_FONT: {
919 op.op = KD_FONT_OP_GET;
920 op.flags = KD_FONT_FLAG_OLD;
921 op.width = 8;
922 op.height = 32;
923 op.charcount = 256;
924 op.data = up;
925 return con_font_op(vc_cons[fg_console].d, &op);
926 }
927
928 case PIO_CMAP:
929 if (!perm)
930 return -EPERM;
931 return con_set_cmap(up);
932
933 case GIO_CMAP:
934 return con_get_cmap(up);
935
936 case PIO_FONTX:
937 case GIO_FONTX:
938 return do_fontx_ioctl(cmd, up, perm, &op);
939
940 case PIO_FONTRESET:
941 {
942 if (!perm)
943 return -EPERM;
944
945#ifdef BROKEN_GRAPHICS_PROGRAMS
946 /* With BROKEN_GRAPHICS_PROGRAMS defined, the default
947 font is not saved. */
948 return -ENOSYS;
949#else
950 {
951 op.op = KD_FONT_OP_SET_DEFAULT;
952 op.data = NULL;
953 i = con_font_op(vc_cons[fg_console].d, &op);
954 if (i)
955 return i;
956 con_set_default_unimap(vc_cons[fg_console].d);
957 return 0;
958 }
959#endif
960 }
961
962 case KDFONTOP: {
963 if (copy_from_user(&op, up, sizeof(op)))
964 return -EFAULT;
965 if (!perm && op.op != KD_FONT_OP_GET)
966 return -EPERM;
967 i = con_font_op(vc, &op);
968 if (i) return i;
969 if (copy_to_user(up, &op, sizeof(op)))
970 return -EFAULT;
971 return 0;
972 }
973
974 case PIO_SCRNMAP:
975 if (!perm)
976 return -EPERM;
977 return con_set_trans_old(up);
978
979 case GIO_SCRNMAP:
980 return con_get_trans_old(up);
981
982 case PIO_UNISCRNMAP:
983 if (!perm)
984 return -EPERM;
985 return con_set_trans_new(up);
986
987 case GIO_UNISCRNMAP:
988 return con_get_trans_new(up);
989
990 case PIO_UNIMAPCLR:
991 { struct unimapinit ui;
992 if (!perm)
993 return -EPERM;
994 i = copy_from_user(&ui, up, sizeof(struct unimapinit));
995 if (i) return -EFAULT;
996 con_clear_unimap(vc, &ui);
997 return 0;
998 }
999
1000 case PIO_UNIMAP:
1001 case GIO_UNIMAP:
1002 return do_unimap_ioctl(cmd, up, perm, vc);
1003
1004 case VT_LOCKSWITCH:
1005 if (!capable(CAP_SYS_TTY_CONFIG))
1006 return -EPERM;
1007 vt_dont_switch = 1;
1008 return 0;
1009 case VT_UNLOCKSWITCH:
1010 if (!capable(CAP_SYS_TTY_CONFIG))
1011 return -EPERM;
1012 vt_dont_switch = 0;
1013 return 0;
Samuel Thibault533475d2006-08-27 01:23:39 -07001014 case VT_GETHIFONTMASK:
1015 return put_user(vc->vc_hi_font_mask, (unsigned short __user *)arg);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001016 default:
1017 return -ENOIOCTLCMD;
1018 }
1019}
1020
1021/*
1022 * Sometimes we want to wait until a particular VT has been activated. We
1023 * do it in a very simple manner. Everybody waits on a single queue and
1024 * get woken up at once. Those that are satisfied go on with their business,
1025 * while those not ready go back to sleep. Seems overkill to add a wait
1026 * to each vt just for this - usually this does nothing!
1027 */
1028static DECLARE_WAIT_QUEUE_HEAD(vt_activate_queue);
1029
1030/*
1031 * Sleeps until a vt is activated, or the task is interrupted. Returns
1032 * 0 if activation, -EINTR if interrupted.
1033 */
1034int vt_waitactive(int vt)
1035{
1036 int retval;
1037 DECLARE_WAITQUEUE(wait, current);
1038
1039 add_wait_queue(&vt_activate_queue, &wait);
1040 for (;;) {
1041 set_current_state(TASK_INTERRUPTIBLE);
1042 retval = 0;
1043 if (vt == fg_console)
1044 break;
1045 retval = -EINTR;
1046 if (signal_pending(current))
1047 break;
1048 schedule();
1049 }
1050 remove_wait_queue(&vt_activate_queue, &wait);
1051 current->state = TASK_RUNNING;
1052 return retval;
1053}
1054
1055#define vt_wake_waitactive() wake_up(&vt_activate_queue)
1056
1057void reset_vc(struct vc_data *vc)
1058{
1059 vc->vc_mode = KD_TEXT;
1060 kbd_table[vc->vc_num].kbdmode = VC_XLATE;
1061 vc->vt_mode.mode = VT_AUTO;
1062 vc->vt_mode.waitv = 0;
1063 vc->vt_mode.relsig = 0;
1064 vc->vt_mode.acqsig = 0;
1065 vc->vt_mode.frsig = 0;
1066 vc->vt_pid = -1;
1067 vc->vt_newvt = -1;
1068 if (!in_interrupt()) /* Via keyboard.c:SAK() - akpm */
1069 reset_palette(vc);
1070}
1071
1072/*
1073 * Performs the back end of a vt switch
1074 */
1075static void complete_change_console(struct vc_data *vc)
1076{
1077 unsigned char old_vc_mode;
1078
1079 last_console = fg_console;
1080
1081 /*
1082 * If we're switching, we could be going from KD_GRAPHICS to
1083 * KD_TEXT mode or vice versa, which means we need to blank or
1084 * unblank the screen later.
1085 */
1086 old_vc_mode = vc_cons[fg_console].d->vc_mode;
1087 switch_screen(vc);
1088
1089 /*
1090 * This can't appear below a successful kill_proc(). If it did,
1091 * then the *blank_screen operation could occur while X, having
1092 * received acqsig, is waking up on another processor. This
1093 * condition can lead to overlapping accesses to the VGA range
1094 * and the framebuffer (causing system lockups).
1095 *
1096 * To account for this we duplicate this code below only if the
1097 * controlling process is gone and we've called reset_vc.
1098 */
1099 if (old_vc_mode != vc->vc_mode) {
1100 if (vc->vc_mode == KD_TEXT)
1101 do_unblank_screen(1);
1102 else
1103 do_blank_screen(1);
1104 }
1105
1106 /*
1107 * If this new console is under process control, send it a signal
1108 * telling it that it has acquired. Also check if it has died and
1109 * clean up (similar to logic employed in change_console())
1110 */
1111 if (vc->vt_mode.mode == VT_PROCESS) {
1112 /*
1113 * Send the signal as privileged - kill_proc() will
1114 * tell us if the process has gone or something else
1115 * is awry
1116 */
1117 if (kill_proc(vc->vt_pid, vc->vt_mode.acqsig, 1) != 0) {
1118 /*
1119 * The controlling process has died, so we revert back to
1120 * normal operation. In this case, we'll also change back
1121 * to KD_TEXT mode. I'm not sure if this is strictly correct
1122 * but it saves the agony when the X server dies and the screen
1123 * remains blanked due to KD_GRAPHICS! It would be nice to do
1124 * this outside of VT_PROCESS but there is no single process
1125 * to account for and tracking tty count may be undesirable.
1126 */
1127 reset_vc(vc);
1128
1129 if (old_vc_mode != vc->vc_mode) {
1130 if (vc->vc_mode == KD_TEXT)
1131 do_unblank_screen(1);
1132 else
1133 do_blank_screen(1);
1134 }
1135 }
1136 }
1137
1138 /*
1139 * Wake anyone waiting for their VT to activate
1140 */
1141 vt_wake_waitactive();
1142 return;
1143}
1144
1145/*
1146 * Performs the front-end of a vt switch
1147 */
1148void change_console(struct vc_data *new_vc)
1149{
1150 struct vc_data *vc;
1151
1152 if (!new_vc || new_vc->vc_num == fg_console || vt_dont_switch)
1153 return;
1154
1155 /*
1156 * If this vt is in process mode, then we need to handshake with
1157 * that process before switching. Essentially, we store where that
1158 * vt wants to switch to and wait for it to tell us when it's done
1159 * (via VT_RELDISP ioctl).
1160 *
1161 * We also check to see if the controlling process still exists.
1162 * If it doesn't, we reset this vt to auto mode and continue.
1163 * This is a cheap way to track process control. The worst thing
1164 * that can happen is: we send a signal to a process, it dies, and
1165 * the switch gets "lost" waiting for a response; hopefully, the
1166 * user will try again, we'll detect the process is gone (unless
1167 * the user waits just the right amount of time :-) and revert the
1168 * vt to auto control.
1169 */
1170 vc = vc_cons[fg_console].d;
1171 if (vc->vt_mode.mode == VT_PROCESS) {
1172 /*
1173 * Send the signal as privileged - kill_proc() will
1174 * tell us if the process has gone or something else
1175 * is awry
1176 */
1177 if (kill_proc(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) {
1178 /*
1179 * It worked. Mark the vt to switch to and
1180 * return. The process needs to send us a
1181 * VT_RELDISP ioctl to complete the switch.
1182 */
1183 vc->vt_newvt = new_vc->vc_num;
1184 return;
1185 }
1186
1187 /*
1188 * The controlling process has died, so we revert back to
1189 * normal operation. In this case, we'll also change back
1190 * to KD_TEXT mode. I'm not sure if this is strictly correct
1191 * but it saves the agony when the X server dies and the screen
1192 * remains blanked due to KD_GRAPHICS! It would be nice to do
1193 * this outside of VT_PROCESS but there is no single process
1194 * to account for and tracking tty count may be undesirable.
1195 */
1196 reset_vc(vc);
1197
1198 /*
1199 * Fall through to normal (VT_AUTO) handling of the switch...
1200 */
1201 }
1202
1203 /*
1204 * Ignore all switches in KD_GRAPHICS+VT_AUTO mode
1205 */
1206 if (vc->vc_mode == KD_GRAPHICS)
1207 return;
1208
1209 complete_change_console(new_vc);
1210}