Linus Walleij | 1f0477f | 2016-04-11 14:12:04 +0200 | [diff] [blame] | 1 | /* |
| 2 | * ROHM 1780GLI Ambient Light Sensor Driver |
| 3 | * |
| 4 | * Copyright (C) 2016 Linaro Ltd. |
| 5 | * Author: Linus Walleij <linus.walleij@linaro.org> |
| 6 | * Loosely based on the previous BH1780 ALS misc driver |
| 7 | * Copyright (C) 2010 Texas Instruments |
| 8 | * Author: Hemanth V <hemanthv@ti.com> |
| 9 | */ |
| 10 | #include <linux/i2c.h> |
| 11 | #include <linux/slab.h> |
| 12 | #include <linux/platform_device.h> |
| 13 | #include <linux/delay.h> |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/of.h> |
| 16 | #include <linux/pm_runtime.h> |
| 17 | #include <linux/iio/iio.h> |
| 18 | #include <linux/iio/sysfs.h> |
| 19 | #include <linux/bitops.h> |
| 20 | |
| 21 | #define BH1780_CMD_BIT BIT(7) |
| 22 | #define BH1780_REG_CONTROL 0x00 |
| 23 | #define BH1780_REG_PARTID 0x0A |
| 24 | #define BH1780_REG_MANFID 0x0B |
| 25 | #define BH1780_REG_DLOW 0x0C |
| 26 | #define BH1780_REG_DHIGH 0x0D |
| 27 | |
| 28 | #define BH1780_REVMASK GENMASK(3,0) |
| 29 | #define BH1780_POWMASK GENMASK(1,0) |
| 30 | #define BH1780_POFF (0x0) |
| 31 | #define BH1780_PON (0x3) |
| 32 | |
| 33 | /* power on settling time in ms */ |
| 34 | #define BH1780_PON_DELAY 2 |
| 35 | /* max time before value available in ms */ |
| 36 | #define BH1780_INTERVAL 250 |
| 37 | |
| 38 | struct bh1780_data { |
| 39 | struct i2c_client *client; |
| 40 | }; |
| 41 | |
| 42 | static int bh1780_write(struct bh1780_data *bh1780, u8 reg, u8 val) |
| 43 | { |
| 44 | int ret = i2c_smbus_write_byte_data(bh1780->client, |
| 45 | BH1780_CMD_BIT | reg, |
| 46 | val); |
| 47 | if (ret < 0) |
| 48 | dev_err(&bh1780->client->dev, |
| 49 | "i2c_smbus_write_byte_data failed error " |
| 50 | "%d, register %01x\n", |
| 51 | ret, reg); |
| 52 | return ret; |
| 53 | } |
| 54 | |
| 55 | static int bh1780_read(struct bh1780_data *bh1780, u8 reg) |
| 56 | { |
| 57 | int ret = i2c_smbus_read_byte_data(bh1780->client, |
| 58 | BH1780_CMD_BIT | reg); |
| 59 | if (ret < 0) |
| 60 | dev_err(&bh1780->client->dev, |
| 61 | "i2c_smbus_read_byte_data failed error " |
| 62 | "%d, register %01x\n", |
| 63 | ret, reg); |
| 64 | return ret; |
| 65 | } |
| 66 | |
| 67 | static int bh1780_read_word(struct bh1780_data *bh1780, u8 reg) |
| 68 | { |
| 69 | int ret = i2c_smbus_read_word_data(bh1780->client, |
| 70 | BH1780_CMD_BIT | reg); |
| 71 | if (ret < 0) |
| 72 | dev_err(&bh1780->client->dev, |
| 73 | "i2c_smbus_read_word_data failed error " |
| 74 | "%d, register %01x\n", |
| 75 | ret, reg); |
| 76 | return ret; |
| 77 | } |
| 78 | |
| 79 | static int bh1780_debugfs_reg_access(struct iio_dev *indio_dev, |
| 80 | unsigned int reg, unsigned int writeval, |
| 81 | unsigned int *readval) |
| 82 | { |
| 83 | struct bh1780_data *bh1780 = iio_priv(indio_dev); |
| 84 | int ret; |
| 85 | |
| 86 | if (!readval) |
Linus Walleij | 53dfc3b | 2016-04-28 14:02:41 +0200 | [diff] [blame] | 87 | return bh1780_write(bh1780, (u8)reg, (u8)writeval); |
Linus Walleij | 1f0477f | 2016-04-11 14:12:04 +0200 | [diff] [blame] | 88 | |
| 89 | ret = bh1780_read(bh1780, (u8)reg); |
| 90 | if (ret < 0) |
| 91 | return ret; |
| 92 | |
| 93 | *readval = ret; |
| 94 | |
| 95 | return 0; |
| 96 | } |
| 97 | |
| 98 | static int bh1780_read_raw(struct iio_dev *indio_dev, |
| 99 | struct iio_chan_spec const *chan, |
| 100 | int *val, int *val2, long mask) |
| 101 | { |
| 102 | struct bh1780_data *bh1780 = iio_priv(indio_dev); |
| 103 | int value; |
| 104 | |
| 105 | switch (mask) { |
| 106 | case IIO_CHAN_INFO_RAW: |
| 107 | switch (chan->type) { |
| 108 | case IIO_LIGHT: |
| 109 | pm_runtime_get_sync(&bh1780->client->dev); |
| 110 | value = bh1780_read_word(bh1780, BH1780_REG_DLOW); |
| 111 | if (value < 0) |
| 112 | return value; |
| 113 | pm_runtime_mark_last_busy(&bh1780->client->dev); |
| 114 | pm_runtime_put_autosuspend(&bh1780->client->dev); |
| 115 | *val = value; |
| 116 | |
| 117 | return IIO_VAL_INT; |
| 118 | default: |
| 119 | return -EINVAL; |
| 120 | } |
| 121 | case IIO_CHAN_INFO_INT_TIME: |
| 122 | *val = 0; |
| 123 | *val2 = BH1780_INTERVAL * 1000; |
| 124 | return IIO_VAL_INT_PLUS_MICRO; |
| 125 | default: |
| 126 | return -EINVAL; |
| 127 | } |
| 128 | } |
| 129 | |
| 130 | static const struct iio_info bh1780_info = { |
| 131 | .driver_module = THIS_MODULE, |
| 132 | .read_raw = bh1780_read_raw, |
| 133 | .debugfs_reg_access = bh1780_debugfs_reg_access, |
| 134 | }; |
| 135 | |
| 136 | static const struct iio_chan_spec bh1780_channels[] = { |
| 137 | { |
| 138 | .type = IIO_LIGHT, |
| 139 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| 140 | BIT(IIO_CHAN_INFO_INT_TIME) |
| 141 | } |
| 142 | }; |
| 143 | |
| 144 | static int bh1780_probe(struct i2c_client *client, |
| 145 | const struct i2c_device_id *id) |
| 146 | { |
| 147 | int ret; |
| 148 | struct bh1780_data *bh1780; |
| 149 | struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
| 150 | struct iio_dev *indio_dev; |
| 151 | |
| 152 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) |
| 153 | return -EIO; |
| 154 | |
| 155 | indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*bh1780)); |
| 156 | if (!indio_dev) |
| 157 | return -ENOMEM; |
| 158 | |
| 159 | bh1780 = iio_priv(indio_dev); |
| 160 | bh1780->client = client; |
| 161 | i2c_set_clientdata(client, indio_dev); |
| 162 | |
| 163 | /* Power up the device */ |
| 164 | ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); |
| 165 | if (ret < 0) |
| 166 | return ret; |
| 167 | msleep(BH1780_PON_DELAY); |
| 168 | pm_runtime_get_noresume(&client->dev); |
| 169 | pm_runtime_set_active(&client->dev); |
| 170 | pm_runtime_enable(&client->dev); |
| 171 | |
| 172 | ret = bh1780_read(bh1780, BH1780_REG_PARTID); |
| 173 | if (ret < 0) |
| 174 | goto out_disable_pm; |
| 175 | dev_info(&client->dev, |
| 176 | "Ambient Light Sensor, Rev : %lu\n", |
| 177 | (ret & BH1780_REVMASK)); |
| 178 | |
| 179 | /* |
| 180 | * As the device takes 250 ms to even come up with a fresh |
| 181 | * measurement after power-on, do not shut it down unnecessarily. |
| 182 | * Set autosuspend to a five seconds. |
| 183 | */ |
| 184 | pm_runtime_set_autosuspend_delay(&client->dev, 5000); |
| 185 | pm_runtime_use_autosuspend(&client->dev); |
| 186 | pm_runtime_put(&client->dev); |
| 187 | |
| 188 | indio_dev->dev.parent = &client->dev; |
| 189 | indio_dev->info = &bh1780_info; |
Linus Walleij | 0dd09ca | 2016-05-25 09:40:27 +0200 | [diff] [blame] | 190 | indio_dev->name = "bh1780"; |
Linus Walleij | 1f0477f | 2016-04-11 14:12:04 +0200 | [diff] [blame] | 191 | indio_dev->channels = bh1780_channels; |
| 192 | indio_dev->num_channels = ARRAY_SIZE(bh1780_channels); |
| 193 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 194 | |
| 195 | ret = iio_device_register(indio_dev); |
| 196 | if (ret) |
| 197 | goto out_disable_pm; |
| 198 | return 0; |
| 199 | |
| 200 | out_disable_pm: |
| 201 | pm_runtime_put_noidle(&client->dev); |
| 202 | pm_runtime_disable(&client->dev); |
| 203 | return ret; |
| 204 | } |
| 205 | |
| 206 | static int bh1780_remove(struct i2c_client *client) |
| 207 | { |
| 208 | struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| 209 | struct bh1780_data *bh1780 = iio_priv(indio_dev); |
| 210 | int ret; |
| 211 | |
| 212 | iio_device_unregister(indio_dev); |
| 213 | pm_runtime_get_sync(&client->dev); |
| 214 | pm_runtime_put_noidle(&client->dev); |
| 215 | pm_runtime_disable(&client->dev); |
| 216 | ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); |
| 217 | if (ret < 0) { |
| 218 | dev_err(&client->dev, "failed to power off\n"); |
| 219 | return ret; |
| 220 | } |
| 221 | |
| 222 | return 0; |
| 223 | } |
| 224 | |
| 225 | #ifdef CONFIG_PM |
| 226 | static int bh1780_runtime_suspend(struct device *dev) |
| 227 | { |
| 228 | struct i2c_client *client = to_i2c_client(dev); |
Linus Walleij | 13c27e9 | 2016-05-25 09:40:26 +0200 | [diff] [blame] | 229 | struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| 230 | struct bh1780_data *bh1780 = iio_priv(indio_dev); |
Linus Walleij | 1f0477f | 2016-04-11 14:12:04 +0200 | [diff] [blame] | 231 | int ret; |
| 232 | |
| 233 | ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); |
| 234 | if (ret < 0) { |
| 235 | dev_err(dev, "failed to runtime suspend\n"); |
| 236 | return ret; |
| 237 | } |
| 238 | |
| 239 | return 0; |
| 240 | } |
| 241 | |
| 242 | static int bh1780_runtime_resume(struct device *dev) |
| 243 | { |
| 244 | struct i2c_client *client = to_i2c_client(dev); |
Linus Walleij | 13c27e9 | 2016-05-25 09:40:26 +0200 | [diff] [blame] | 245 | struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| 246 | struct bh1780_data *bh1780 = iio_priv(indio_dev); |
Linus Walleij | 1f0477f | 2016-04-11 14:12:04 +0200 | [diff] [blame] | 247 | int ret; |
| 248 | |
| 249 | ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); |
| 250 | if (ret < 0) { |
| 251 | dev_err(dev, "failed to runtime resume\n"); |
| 252 | return ret; |
| 253 | } |
| 254 | |
| 255 | /* Wait for power on, then for a value to be available */ |
| 256 | msleep(BH1780_PON_DELAY + BH1780_INTERVAL); |
| 257 | |
| 258 | return 0; |
| 259 | } |
| 260 | #endif /* CONFIG_PM */ |
| 261 | |
| 262 | static const struct dev_pm_ops bh1780_dev_pm_ops = { |
| 263 | SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, |
| 264 | pm_runtime_force_resume) |
| 265 | SET_RUNTIME_PM_OPS(bh1780_runtime_suspend, |
| 266 | bh1780_runtime_resume, NULL) |
| 267 | }; |
| 268 | |
| 269 | static const struct i2c_device_id bh1780_id[] = { |
| 270 | { "bh1780", 0 }, |
| 271 | { }, |
| 272 | }; |
| 273 | |
| 274 | MODULE_DEVICE_TABLE(i2c, bh1780_id); |
| 275 | |
| 276 | #ifdef CONFIG_OF |
| 277 | static const struct of_device_id of_bh1780_match[] = { |
| 278 | { .compatible = "rohm,bh1780gli", }, |
| 279 | {}, |
| 280 | }; |
| 281 | MODULE_DEVICE_TABLE(of, of_bh1780_match); |
| 282 | #endif |
| 283 | |
| 284 | static struct i2c_driver bh1780_driver = { |
| 285 | .probe = bh1780_probe, |
| 286 | .remove = bh1780_remove, |
| 287 | .id_table = bh1780_id, |
| 288 | .driver = { |
| 289 | .name = "bh1780", |
| 290 | .pm = &bh1780_dev_pm_ops, |
| 291 | .of_match_table = of_match_ptr(of_bh1780_match), |
| 292 | }, |
| 293 | }; |
| 294 | |
| 295 | module_i2c_driver(bh1780_driver); |
| 296 | |
| 297 | MODULE_DESCRIPTION("ROHM BH1780GLI Ambient Light Sensor Driver"); |
| 298 | MODULE_LICENSE("GPL"); |
| 299 | MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); |