Baruch Siach | 3b31d0e | 2013-12-12 11:18:41 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2013 TangoTec Ltd. |
| 3 | * Author: Baruch Siach <baruch@tkos.co.il> |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License version 2 as |
| 7 | * published by the Free Software Foundation. |
| 8 | * |
| 9 | * Driver for the Xtensa LX4 GPIO32 Option |
| 10 | * |
| 11 | * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22 |
| 12 | * |
| 13 | * GPIO32 is a standard optional extension to the Xtensa architecture core that |
| 14 | * provides preconfigured output and input ports for intra SoC signaling. The |
| 15 | * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE) |
| 16 | * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This |
| 17 | * driver treats input and output states as two distinct devices. |
| 18 | * |
| 19 | * Access to GPIO32 specific instructions is controlled by the CPENABLE |
| 20 | * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code |
| 21 | * disables access to all coprocessors. This driver sets the CPENABLE bit |
| 22 | * corresponding to GPIO32 before any GPIO32 specific instruction, and restores |
| 23 | * CPENABLE state after that. |
| 24 | * |
| 25 | * This driver is currently incompatible with SMP. The GPIO32 extension is not |
| 26 | * guaranteed to be available in all cores. Moreover, each core controls a |
| 27 | * different set of IO wires. A theoretical SMP aware version of this driver |
| 28 | * would need to have a per core workqueue to do the actual GPIO manipulation. |
| 29 | */ |
| 30 | |
| 31 | #include <linux/err.h> |
| 32 | #include <linux/module.h> |
| 33 | #include <linux/gpio.h> |
| 34 | #include <linux/bitops.h> |
| 35 | #include <linux/platform_device.h> |
| 36 | |
| 37 | #include <asm/coprocessor.h> /* CPENABLE read/write macros */ |
| 38 | |
| 39 | #ifndef XCHAL_CP_ID_XTIOP |
| 40 | #error GPIO32 option is not enabled for your xtensa core variant |
| 41 | #endif |
| 42 | |
Baruch Siach | cffcc92 | 2014-01-23 08:50:38 +0200 | [diff] [blame] | 43 | #if XCHAL_HAVE_CP |
| 44 | |
Baruch Siach | 3b31d0e | 2013-12-12 11:18:41 +0200 | [diff] [blame] | 45 | static inline unsigned long enable_cp(unsigned long *cpenable) |
| 46 | { |
| 47 | unsigned long flags; |
| 48 | |
| 49 | local_irq_save(flags); |
| 50 | RSR_CPENABLE(*cpenable); |
| 51 | WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP)); |
| 52 | |
| 53 | return flags; |
| 54 | } |
| 55 | |
| 56 | static inline void disable_cp(unsigned long flags, unsigned long cpenable) |
| 57 | { |
| 58 | WSR_CPENABLE(cpenable); |
| 59 | local_irq_restore(flags); |
| 60 | } |
| 61 | |
Baruch Siach | cffcc92 | 2014-01-23 08:50:38 +0200 | [diff] [blame] | 62 | #else |
| 63 | |
| 64 | static inline unsigned long enable_cp(unsigned long *cpenable) |
| 65 | { |
| 66 | *cpenable = 0; /* avoid uninitialized value warning */ |
| 67 | return 0; |
| 68 | } |
| 69 | |
| 70 | static inline void disable_cp(unsigned long flags, unsigned long cpenable) |
| 71 | { |
| 72 | } |
| 73 | |
| 74 | #endif /* XCHAL_HAVE_CP */ |
| 75 | |
Baruch Siach | 3b31d0e | 2013-12-12 11:18:41 +0200 | [diff] [blame] | 76 | static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset) |
| 77 | { |
| 78 | return 1; /* input only */ |
| 79 | } |
| 80 | |
| 81 | static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset) |
| 82 | { |
| 83 | unsigned long flags, saved_cpenable; |
| 84 | u32 impwire; |
| 85 | |
| 86 | flags = enable_cp(&saved_cpenable); |
| 87 | __asm__ __volatile__("read_impwire %0" : "=a" (impwire)); |
| 88 | disable_cp(flags, saved_cpenable); |
| 89 | |
| 90 | return !!(impwire & BIT(offset)); |
| 91 | } |
| 92 | |
| 93 | static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset, |
| 94 | int value) |
| 95 | { |
| 96 | BUG(); /* output only; should never be called */ |
| 97 | } |
| 98 | |
| 99 | static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset) |
| 100 | { |
| 101 | return 0; /* output only */ |
| 102 | } |
| 103 | |
| 104 | static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset) |
| 105 | { |
| 106 | unsigned long flags, saved_cpenable; |
| 107 | u32 expstate; |
| 108 | |
| 109 | flags = enable_cp(&saved_cpenable); |
| 110 | __asm__ __volatile__("rur.expstate %0" : "=a" (expstate)); |
| 111 | disable_cp(flags, saved_cpenable); |
| 112 | |
| 113 | return !!(expstate & BIT(offset)); |
| 114 | } |
| 115 | |
| 116 | static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset, |
| 117 | int value) |
| 118 | { |
| 119 | unsigned long flags, saved_cpenable; |
| 120 | u32 mask = BIT(offset); |
| 121 | u32 val = value ? BIT(offset) : 0; |
| 122 | |
| 123 | flags = enable_cp(&saved_cpenable); |
| 124 | __asm__ __volatile__("wrmsk_expstate %0, %1" |
| 125 | :: "a" (val), "a" (mask)); |
| 126 | disable_cp(flags, saved_cpenable); |
| 127 | } |
| 128 | |
| 129 | static struct gpio_chip impwire_chip = { |
| 130 | .label = "impwire", |
| 131 | .base = -1, |
| 132 | .ngpio = 32, |
| 133 | .get_direction = xtensa_impwire_get_direction, |
| 134 | .get = xtensa_impwire_get_value, |
| 135 | .set = xtensa_impwire_set_value, |
| 136 | }; |
| 137 | |
| 138 | static struct gpio_chip expstate_chip = { |
| 139 | .label = "expstate", |
| 140 | .base = -1, |
| 141 | .ngpio = 32, |
| 142 | .get_direction = xtensa_expstate_get_direction, |
| 143 | .get = xtensa_expstate_get_value, |
| 144 | .set = xtensa_expstate_set_value, |
| 145 | }; |
| 146 | |
| 147 | static int xtensa_gpio_probe(struct platform_device *pdev) |
| 148 | { |
| 149 | int ret; |
| 150 | |
| 151 | ret = gpiochip_add(&impwire_chip); |
| 152 | if (ret) |
| 153 | return ret; |
| 154 | return gpiochip_add(&expstate_chip); |
| 155 | } |
| 156 | |
| 157 | static struct platform_driver xtensa_gpio_driver = { |
| 158 | .driver = { |
| 159 | .name = "xtensa-gpio", |
| 160 | .owner = THIS_MODULE, |
| 161 | }, |
| 162 | .probe = xtensa_gpio_probe, |
| 163 | }; |
| 164 | |
| 165 | static int __init xtensa_gpio_init(void) |
| 166 | { |
| 167 | struct platform_device *pdev; |
| 168 | |
| 169 | pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0); |
| 170 | if (IS_ERR(pdev)) |
| 171 | return PTR_ERR(pdev); |
| 172 | |
| 173 | return platform_driver_register(&xtensa_gpio_driver); |
| 174 | } |
| 175 | device_initcall(xtensa_gpio_init); |
| 176 | |
| 177 | MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); |
| 178 | MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver"); |
| 179 | MODULE_LICENSE("GPL"); |