Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 5612ac83b9d7a32a7f2967d9f6f97e7f3428dfd2 / . / arch / arm / boot / dts / am335x-baltos-ir3220.dts
blob: 46df1b22022c75d811fe7d3af920a3fef95f6af6 [file] [log] [blame]
Yegor Yefremovd78b6102016-04-26 15:00:25 +0200[diff] [blame]1/*
2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9/*
10 * VScom OnRISC
11 * http://www.vscom.de
12 */
13
14/dts-v1/;
15
16#include "am335x-baltos.dtsi"
Yegor Yefremov21339f52017-03-28 15:09:16 +0200[diff] [blame]17#include "am335x-baltos-leds.dtsi"
Yegor Yefremovd78b6102016-04-26 15:00:25 +0200[diff] [blame]18
19/ {
20 model = "OnRISC Baltos iR 3220";
21};
22
23&am33xx_pinmux {
24 tca6416_pins: pinmux_tca6416_pins {
25 pinctrl-single,pins = <
26 AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
27 >;
28 };
29
30 uart1_pins: pinmux_uart1_pins {
31 pinctrl-single,pins = <
32 AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
33 AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
34 AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */
35 AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */
36 AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
37 AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
38 AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
39 AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
40 >;
41 };
42
43 uart2_pins: pinmux_uart2_pins {
44 pinctrl-single,pins = <
45 AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
46 AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
47 AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
48 AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
49 AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
50 AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
51 AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
52 AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
53
54 AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
55 >;
56 };
57};
58
59&uart1 {
60 pinctrl-names = "default";
61 pinctrl-0 = <&uart1_pins>;
62 dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
63 dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
64 dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
65 rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
66
67 status = "okay";
68};
69
70&uart2 {
71 pinctrl-names = "default";
72 pinctrl-0 = <&uart2_pins>;
73 dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
74 dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
75 dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
76 rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
77
78 status = "okay";
79};
80
81&i2c1 {
82 tca6416: gpio@20 {
83 compatible = "ti,tca6416";
84 reg = <0x20>;
85 gpio-controller;
86 #gpio-cells = <2>;
87 interrupt-parent = <&gpio0>;
88 interrupts = <20 GPIO_ACTIVE_LOW>;
89 pinctrl-names = "default";
90 pinctrl-0 = <&tca6416_pins>;
91 };
92};
93
94&usb0_phy {
95 status = "okay";
96};
97
98&usb0 {
99 status = "okay";
100 dr_mode = "host";
101};
102
103&cpsw_emac0 {
104 phy-mode = "rmii";
105 dual_emac_res_vlan = <1>;
106 fixed-link {
107 speed = <100>;
108 full-duplex;
109 };
110};
111
112&cpsw_emac1 {
Yegor Yefremovd78b6102016-04-26 15:00:25 +0200[diff] [blame]113 phy-mode = "rgmii-txid";
114 dual_emac_res_vlan = <2>;
Yegor Yefremovf5c59d12016-11-23 16:49:26 +0100[diff] [blame]115 phy-handle = <&phy1>;
Yegor Yefremovd78b6102016-04-26 15:00:25 +0200[diff] [blame]116};
117
118&phy_sel {
119 rmii-clock-ext = <1>;
120};