Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 1 | /* |
| 2 | Copyright (C) 2004 - 2007 rt2x00 SourceForge Project |
| 3 | <http://rt2x00.serialmonkey.com> |
| 4 | |
| 5 | This program is free software; you can redistribute it and/or modify |
| 6 | it under the terms of the GNU General Public License as published by |
| 7 | the Free Software Foundation; either version 2 of the License, or |
| 8 | (at your option) any later version. |
| 9 | |
| 10 | This program is distributed in the hope that it will be useful, |
| 11 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | GNU General Public License for more details. |
| 14 | |
| 15 | You should have received a copy of the GNU General Public License |
| 16 | along with this program; if not, write to the |
| 17 | Free Software Foundation, Inc., |
| 18 | 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| 19 | */ |
| 20 | |
| 21 | /* |
| 22 | Module: rt61pci |
| 23 | Abstract: rt61pci device specific routines. |
| 24 | Supported chipsets: RT2561, RT2561s, RT2661. |
| 25 | */ |
| 26 | |
| 27 | /* |
| 28 | * Set enviroment defines for rt2x00.h |
| 29 | */ |
| 30 | #define DRV_NAME "rt61pci" |
| 31 | |
| 32 | #include <linux/delay.h> |
| 33 | #include <linux/etherdevice.h> |
| 34 | #include <linux/init.h> |
| 35 | #include <linux/kernel.h> |
| 36 | #include <linux/module.h> |
| 37 | #include <linux/pci.h> |
| 38 | #include <linux/eeprom_93cx6.h> |
| 39 | |
| 40 | #include "rt2x00.h" |
| 41 | #include "rt2x00pci.h" |
| 42 | #include "rt61pci.h" |
| 43 | |
| 44 | /* |
| 45 | * Register access. |
| 46 | * BBP and RF register require indirect register access, |
| 47 | * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this. |
| 48 | * These indirect registers work with busy bits, |
| 49 | * and we will try maximal REGISTER_BUSY_COUNT times to access |
| 50 | * the register while taking a REGISTER_BUSY_DELAY us delay |
| 51 | * between each attampt. When the busy bit is still set at that time, |
| 52 | * the access attempt is considered to have failed, |
| 53 | * and we will print an error. |
| 54 | */ |
| 55 | static u32 rt61pci_bbp_check(const struct rt2x00_dev *rt2x00dev) |
| 56 | { |
| 57 | u32 reg; |
| 58 | unsigned int i; |
| 59 | |
| 60 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
| 61 | rt2x00pci_register_read(rt2x00dev, PHY_CSR3, ®); |
| 62 | if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY)) |
| 63 | break; |
| 64 | udelay(REGISTER_BUSY_DELAY); |
| 65 | } |
| 66 | |
| 67 | return reg; |
| 68 | } |
| 69 | |
| 70 | static void rt61pci_bbp_write(const struct rt2x00_dev *rt2x00dev, |
| 71 | const unsigned int word, const u8 value) |
| 72 | { |
| 73 | u32 reg; |
| 74 | |
| 75 | /* |
| 76 | * Wait until the BBP becomes ready. |
| 77 | */ |
| 78 | reg = rt61pci_bbp_check(rt2x00dev); |
| 79 | if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { |
| 80 | ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); |
| 81 | return; |
| 82 | } |
| 83 | |
| 84 | /* |
| 85 | * Write the data into the BBP. |
| 86 | */ |
| 87 | reg = 0; |
| 88 | rt2x00_set_field32(®, PHY_CSR3_VALUE, value); |
| 89 | rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); |
| 90 | rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); |
| 91 | rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); |
| 92 | |
| 93 | rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); |
| 94 | } |
| 95 | |
| 96 | static void rt61pci_bbp_read(const struct rt2x00_dev *rt2x00dev, |
| 97 | const unsigned int word, u8 *value) |
| 98 | { |
| 99 | u32 reg; |
| 100 | |
| 101 | /* |
| 102 | * Wait until the BBP becomes ready. |
| 103 | */ |
| 104 | reg = rt61pci_bbp_check(rt2x00dev); |
| 105 | if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { |
| 106 | ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); |
| 107 | return; |
| 108 | } |
| 109 | |
| 110 | /* |
| 111 | * Write the request into the BBP. |
| 112 | */ |
| 113 | reg = 0; |
| 114 | rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); |
| 115 | rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); |
| 116 | rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); |
| 117 | |
| 118 | rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); |
| 119 | |
| 120 | /* |
| 121 | * Wait until the BBP becomes ready. |
| 122 | */ |
| 123 | reg = rt61pci_bbp_check(rt2x00dev); |
| 124 | if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { |
| 125 | ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); |
| 126 | *value = 0xff; |
| 127 | return; |
| 128 | } |
| 129 | |
| 130 | *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); |
| 131 | } |
| 132 | |
| 133 | static void rt61pci_rf_write(const struct rt2x00_dev *rt2x00dev, |
| 134 | const unsigned int word, const u32 value) |
| 135 | { |
| 136 | u32 reg; |
| 137 | unsigned int i; |
| 138 | |
| 139 | if (!word) |
| 140 | return; |
| 141 | |
| 142 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
| 143 | rt2x00pci_register_read(rt2x00dev, PHY_CSR4, ®); |
| 144 | if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY)) |
| 145 | goto rf_write; |
| 146 | udelay(REGISTER_BUSY_DELAY); |
| 147 | } |
| 148 | |
| 149 | ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n"); |
| 150 | return; |
| 151 | |
| 152 | rf_write: |
| 153 | reg = 0; |
| 154 | rt2x00_set_field32(®, PHY_CSR4_VALUE, value); |
| 155 | rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 21); |
| 156 | rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); |
| 157 | rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); |
| 158 | |
| 159 | rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg); |
| 160 | rt2x00_rf_write(rt2x00dev, word, value); |
| 161 | } |
| 162 | |
| 163 | static void rt61pci_mcu_request(const struct rt2x00_dev *rt2x00dev, |
| 164 | const u8 command, const u8 token, |
| 165 | const u8 arg0, const u8 arg1) |
| 166 | { |
| 167 | u32 reg; |
| 168 | |
| 169 | rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CSR, ®); |
| 170 | |
| 171 | if (rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER)) { |
| 172 | ERROR(rt2x00dev, "mcu request error. " |
| 173 | "Request 0x%02x failed for token 0x%02x.\n", |
| 174 | command, token); |
| 175 | return; |
| 176 | } |
| 177 | |
| 178 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); |
| 179 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); |
| 180 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); |
| 181 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); |
| 182 | rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); |
| 183 | |
| 184 | rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, ®); |
| 185 | rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); |
| 186 | rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); |
| 187 | rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); |
| 188 | } |
| 189 | |
| 190 | static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom) |
| 191 | { |
| 192 | struct rt2x00_dev *rt2x00dev = eeprom->data; |
| 193 | u32 reg; |
| 194 | |
| 195 | rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); |
| 196 | |
| 197 | eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); |
| 198 | eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); |
| 199 | eeprom->reg_data_clock = |
| 200 | !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK); |
| 201 | eeprom->reg_chip_select = |
| 202 | !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT); |
| 203 | } |
| 204 | |
| 205 | static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom) |
| 206 | { |
| 207 | struct rt2x00_dev *rt2x00dev = eeprom->data; |
| 208 | u32 reg = 0; |
| 209 | |
| 210 | rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in); |
| 211 | rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out); |
| 212 | rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, |
| 213 | !!eeprom->reg_data_clock); |
| 214 | rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, |
| 215 | !!eeprom->reg_chip_select); |
| 216 | |
| 217 | rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg); |
| 218 | } |
| 219 | |
| 220 | #ifdef CONFIG_RT2X00_LIB_DEBUGFS |
| 221 | #define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) |
| 222 | |
| 223 | static void rt61pci_read_csr(const struct rt2x00_dev *rt2x00dev, |
| 224 | const unsigned int word, u32 *data) |
| 225 | { |
| 226 | rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); |
| 227 | } |
| 228 | |
| 229 | static void rt61pci_write_csr(const struct rt2x00_dev *rt2x00dev, |
| 230 | const unsigned int word, u32 data) |
| 231 | { |
| 232 | rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); |
| 233 | } |
| 234 | |
| 235 | static const struct rt2x00debug rt61pci_rt2x00debug = { |
| 236 | .owner = THIS_MODULE, |
| 237 | .csr = { |
| 238 | .read = rt61pci_read_csr, |
| 239 | .write = rt61pci_write_csr, |
| 240 | .word_size = sizeof(u32), |
| 241 | .word_count = CSR_REG_SIZE / sizeof(u32), |
| 242 | }, |
| 243 | .eeprom = { |
| 244 | .read = rt2x00_eeprom_read, |
| 245 | .write = rt2x00_eeprom_write, |
| 246 | .word_size = sizeof(u16), |
| 247 | .word_count = EEPROM_SIZE / sizeof(u16), |
| 248 | }, |
| 249 | .bbp = { |
| 250 | .read = rt61pci_bbp_read, |
| 251 | .write = rt61pci_bbp_write, |
| 252 | .word_size = sizeof(u8), |
| 253 | .word_count = BBP_SIZE / sizeof(u8), |
| 254 | }, |
| 255 | .rf = { |
| 256 | .read = rt2x00_rf_read, |
| 257 | .write = rt61pci_rf_write, |
| 258 | .word_size = sizeof(u32), |
| 259 | .word_count = RF_SIZE / sizeof(u32), |
| 260 | }, |
| 261 | }; |
| 262 | #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ |
| 263 | |
| 264 | #ifdef CONFIG_RT61PCI_RFKILL |
| 265 | static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) |
| 266 | { |
| 267 | u32 reg; |
| 268 | |
| 269 | rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); |
| 270 | return rt2x00_get_field32(reg, MAC_CSR13_BIT5);; |
| 271 | } |
Ivo van Doorn | dcf5475 | 2007-09-25 20:57:25 +0200 | [diff] [blame] | 272 | #endif /* CONFIG_RT61PCI_RFKILL */ |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 273 | |
| 274 | /* |
| 275 | * Configuration handlers. |
| 276 | */ |
Ivo van Doorn | 4abee4b | 2007-10-06 14:11:46 +0200 | [diff] [blame] | 277 | static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac) |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 278 | { |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 279 | u32 tmp; |
| 280 | |
Ivo van Doorn | 4abee4b | 2007-10-06 14:11:46 +0200 | [diff] [blame] | 281 | tmp = le32_to_cpu(mac[1]); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 282 | rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); |
Ivo van Doorn | 4abee4b | 2007-10-06 14:11:46 +0200 | [diff] [blame] | 283 | mac[1] = cpu_to_le32(tmp); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 284 | |
Ivo van Doorn | 4abee4b | 2007-10-06 14:11:46 +0200 | [diff] [blame] | 285 | rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, mac, |
| 286 | (2 * sizeof(__le32))); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 287 | } |
| 288 | |
Ivo van Doorn | 4abee4b | 2007-10-06 14:11:46 +0200 | [diff] [blame] | 289 | static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid) |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 290 | { |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 291 | u32 tmp; |
| 292 | |
Ivo van Doorn | 4abee4b | 2007-10-06 14:11:46 +0200 | [diff] [blame] | 293 | tmp = le32_to_cpu(bssid[1]); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 294 | rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3); |
Ivo van Doorn | 4abee4b | 2007-10-06 14:11:46 +0200 | [diff] [blame] | 295 | bssid[1] = cpu_to_le32(tmp); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 296 | |
Ivo van Doorn | 4abee4b | 2007-10-06 14:11:46 +0200 | [diff] [blame] | 297 | rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, bssid, |
| 298 | (2 * sizeof(__le32))); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 299 | } |
| 300 | |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 301 | static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type) |
| 302 | { |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 303 | struct interface *intf = &rt2x00dev->interface; |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 304 | u32 reg; |
| 305 | |
| 306 | /* |
| 307 | * Clear current synchronisation setup. |
| 308 | * For the Beacon base registers we only need to clear |
| 309 | * the first byte since that byte contains the VALID and OWNER |
| 310 | * bits which (when set to 0) will invalidate the entire beacon. |
| 311 | */ |
| 312 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); |
| 313 | rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); |
| 314 | rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); |
| 315 | rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); |
| 316 | rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); |
| 317 | |
| 318 | /* |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 319 | * Enable synchronisation. |
| 320 | */ |
| 321 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 322 | rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); |
| 323 | rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 324 | rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 325 | if (is_interface_type(intf, IEEE80211_IF_TYPE_IBSS) || |
| 326 | is_interface_type(intf, IEEE80211_IF_TYPE_AP)) |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 327 | rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 2); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 328 | else if (is_interface_type(intf, IEEE80211_IF_TYPE_STA)) |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 329 | rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 1); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 330 | else |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 331 | rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 332 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); |
| 333 | } |
| 334 | |
| 335 | static void rt61pci_config_rate(struct rt2x00_dev *rt2x00dev, const int rate) |
| 336 | { |
| 337 | struct ieee80211_conf *conf = &rt2x00dev->hw->conf; |
| 338 | u32 reg; |
| 339 | u32 value; |
| 340 | u32 preamble; |
| 341 | |
| 342 | if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE)) |
| 343 | preamble = SHORT_PREAMBLE; |
| 344 | else |
| 345 | preamble = PREAMBLE; |
| 346 | |
| 347 | /* |
| 348 | * Extract the allowed ratemask from the device specific rate value, |
| 349 | * We need to set TXRX_CSR5 to the basic rate mask so we need to mask |
| 350 | * off the non-basic rates. |
| 351 | */ |
| 352 | reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK; |
| 353 | |
| 354 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, reg); |
| 355 | |
| 356 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); |
| 357 | value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? |
| 358 | SHORT_DIFS : DIFS) + |
| 359 | PLCP + preamble + get_duration(ACK_SIZE, 10); |
| 360 | rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, value); |
| 361 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); |
| 362 | |
| 363 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); |
| 364 | if (preamble == SHORT_PREAMBLE) |
| 365 | rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, 1); |
| 366 | else |
| 367 | rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, 0); |
| 368 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); |
| 369 | } |
| 370 | |
| 371 | static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev, |
| 372 | const int phymode) |
| 373 | { |
| 374 | struct ieee80211_hw_mode *mode; |
| 375 | struct ieee80211_rate *rate; |
| 376 | |
| 377 | if (phymode == MODE_IEEE80211A) |
| 378 | rt2x00dev->curr_hwmode = HWMODE_A; |
| 379 | else if (phymode == MODE_IEEE80211B) |
| 380 | rt2x00dev->curr_hwmode = HWMODE_B; |
| 381 | else |
| 382 | rt2x00dev->curr_hwmode = HWMODE_G; |
| 383 | |
| 384 | mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; |
| 385 | rate = &mode->rates[mode->num_rates - 1]; |
| 386 | |
| 387 | rt61pci_config_rate(rt2x00dev, rate->val2); |
| 388 | } |
| 389 | |
| 390 | static void rt61pci_config_lock_channel(struct rt2x00_dev *rt2x00dev, |
| 391 | struct rf_channel *rf, |
| 392 | const int txpower) |
| 393 | { |
| 394 | u8 r3; |
| 395 | u8 r94; |
| 396 | u8 smart; |
| 397 | |
| 398 | rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); |
| 399 | rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); |
| 400 | |
| 401 | smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) || |
| 402 | rt2x00_rf(&rt2x00dev->chip, RF2527)); |
| 403 | |
| 404 | rt61pci_bbp_read(rt2x00dev, 3, &r3); |
| 405 | rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); |
| 406 | rt61pci_bbp_write(rt2x00dev, 3, r3); |
| 407 | |
| 408 | r94 = 6; |
| 409 | if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) |
| 410 | r94 += txpower - MAX_TXPOWER; |
| 411 | else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) |
| 412 | r94 += txpower; |
| 413 | rt61pci_bbp_write(rt2x00dev, 94, r94); |
| 414 | |
| 415 | rt61pci_rf_write(rt2x00dev, 1, rf->rf1); |
| 416 | rt61pci_rf_write(rt2x00dev, 2, rf->rf2); |
| 417 | rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); |
| 418 | rt61pci_rf_write(rt2x00dev, 4, rf->rf4); |
| 419 | |
| 420 | udelay(200); |
| 421 | |
| 422 | rt61pci_rf_write(rt2x00dev, 1, rf->rf1); |
| 423 | rt61pci_rf_write(rt2x00dev, 2, rf->rf2); |
| 424 | rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); |
| 425 | rt61pci_rf_write(rt2x00dev, 4, rf->rf4); |
| 426 | |
| 427 | udelay(200); |
| 428 | |
| 429 | rt61pci_rf_write(rt2x00dev, 1, rf->rf1); |
| 430 | rt61pci_rf_write(rt2x00dev, 2, rf->rf2); |
| 431 | rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); |
| 432 | rt61pci_rf_write(rt2x00dev, 4, rf->rf4); |
| 433 | |
| 434 | msleep(1); |
| 435 | } |
| 436 | |
| 437 | static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev, |
| 438 | const int index, const int channel, |
| 439 | const int txpower) |
| 440 | { |
| 441 | struct rf_channel rf; |
| 442 | |
| 443 | /* |
| 444 | * Fill rf_reg structure. |
| 445 | */ |
| 446 | memcpy(&rf, &rt2x00dev->spec.channels[index], sizeof(rf)); |
| 447 | |
| 448 | rt61pci_config_lock_channel(rt2x00dev, &rf, txpower); |
| 449 | } |
| 450 | |
| 451 | static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev, |
| 452 | const int txpower) |
| 453 | { |
| 454 | struct rf_channel rf; |
| 455 | |
| 456 | rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); |
| 457 | rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); |
| 458 | rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); |
| 459 | rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); |
| 460 | |
| 461 | rt61pci_config_lock_channel(rt2x00dev, &rf, txpower); |
| 462 | } |
| 463 | |
| 464 | static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, |
| 465 | const int antenna_tx, |
| 466 | const int antenna_rx) |
| 467 | { |
| 468 | u8 r3; |
| 469 | u8 r4; |
| 470 | u8 r77; |
| 471 | |
| 472 | rt61pci_bbp_read(rt2x00dev, 3, &r3); |
| 473 | rt61pci_bbp_read(rt2x00dev, 4, &r4); |
| 474 | rt61pci_bbp_read(rt2x00dev, 77, &r77); |
| 475 | |
| 476 | rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, |
| 477 | !rt2x00_rf(&rt2x00dev->chip, RF5225)); |
| 478 | |
| 479 | switch (antenna_rx) { |
| 480 | case ANTENNA_SW_DIVERSITY: |
| 481 | case ANTENNA_HW_DIVERSITY: |
| 482 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); |
| 483 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, |
| 484 | !!(rt2x00dev->curr_hwmode != HWMODE_A)); |
| 485 | break; |
| 486 | case ANTENNA_A: |
| 487 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); |
| 488 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); |
| 489 | |
| 490 | if (rt2x00dev->curr_hwmode == HWMODE_A) |
| 491 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); |
| 492 | else |
| 493 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); |
| 494 | break; |
| 495 | case ANTENNA_B: |
| 496 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); |
| 497 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); |
| 498 | |
| 499 | if (rt2x00dev->curr_hwmode == HWMODE_A) |
| 500 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); |
| 501 | else |
| 502 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); |
| 503 | break; |
| 504 | } |
| 505 | |
| 506 | rt61pci_bbp_write(rt2x00dev, 77, r77); |
| 507 | rt61pci_bbp_write(rt2x00dev, 3, r3); |
| 508 | rt61pci_bbp_write(rt2x00dev, 4, r4); |
| 509 | } |
| 510 | |
| 511 | static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, |
| 512 | const int antenna_tx, |
| 513 | const int antenna_rx) |
| 514 | { |
| 515 | u8 r3; |
| 516 | u8 r4; |
| 517 | u8 r77; |
| 518 | |
| 519 | rt61pci_bbp_read(rt2x00dev, 3, &r3); |
| 520 | rt61pci_bbp_read(rt2x00dev, 4, &r4); |
| 521 | rt61pci_bbp_read(rt2x00dev, 77, &r77); |
| 522 | |
| 523 | rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, |
| 524 | !rt2x00_rf(&rt2x00dev->chip, RF2527)); |
| 525 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, |
| 526 | !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)); |
| 527 | |
| 528 | switch (antenna_rx) { |
| 529 | case ANTENNA_SW_DIVERSITY: |
| 530 | case ANTENNA_HW_DIVERSITY: |
| 531 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); |
| 532 | break; |
| 533 | case ANTENNA_A: |
| 534 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); |
| 535 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); |
| 536 | break; |
| 537 | case ANTENNA_B: |
| 538 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); |
| 539 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); |
| 540 | break; |
| 541 | } |
| 542 | |
| 543 | rt61pci_bbp_write(rt2x00dev, 77, r77); |
| 544 | rt61pci_bbp_write(rt2x00dev, 3, r3); |
| 545 | rt61pci_bbp_write(rt2x00dev, 4, r4); |
| 546 | } |
| 547 | |
| 548 | static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev, |
| 549 | const int p1, const int p2) |
| 550 | { |
| 551 | u32 reg; |
| 552 | |
| 553 | rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); |
| 554 | |
| 555 | if (p1 != 0xff) { |
| 556 | rt2x00_set_field32(®, MAC_CSR13_BIT4, !!p1); |
| 557 | rt2x00_set_field32(®, MAC_CSR13_BIT12, 0); |
| 558 | rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg); |
| 559 | } |
| 560 | if (p2 != 0xff) { |
| 561 | rt2x00_set_field32(®, MAC_CSR13_BIT3, !p2); |
| 562 | rt2x00_set_field32(®, MAC_CSR13_BIT11, 0); |
| 563 | rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg); |
| 564 | } |
| 565 | } |
| 566 | |
| 567 | static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev, |
| 568 | const int antenna_tx, |
| 569 | const int antenna_rx) |
| 570 | { |
| 571 | u16 eeprom; |
| 572 | u8 r3; |
| 573 | u8 r4; |
| 574 | u8 r77; |
| 575 | |
| 576 | rt61pci_bbp_read(rt2x00dev, 3, &r3); |
| 577 | rt61pci_bbp_read(rt2x00dev, 4, &r4); |
| 578 | rt61pci_bbp_read(rt2x00dev, 77, &r77); |
| 579 | rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); |
| 580 | |
| 581 | rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); |
| 582 | |
| 583 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && |
| 584 | rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { |
| 585 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); |
| 586 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 1); |
| 587 | rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); |
| 588 | } else if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY)) { |
| 589 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED) >= 2) { |
| 590 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); |
| 591 | rt61pci_bbp_write(rt2x00dev, 77, r77); |
| 592 | } |
| 593 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); |
| 594 | rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); |
| 595 | } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && |
| 596 | rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { |
| 597 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); |
| 598 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); |
| 599 | |
| 600 | switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) { |
| 601 | case 0: |
| 602 | rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); |
| 603 | break; |
| 604 | case 1: |
| 605 | rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0); |
| 606 | break; |
| 607 | case 2: |
| 608 | rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); |
| 609 | break; |
| 610 | case 3: |
| 611 | rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); |
| 612 | break; |
| 613 | } |
| 614 | } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && |
| 615 | !rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { |
| 616 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); |
| 617 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); |
| 618 | |
| 619 | switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) { |
| 620 | case 0: |
| 621 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); |
| 622 | rt61pci_bbp_write(rt2x00dev, 77, r77); |
| 623 | rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); |
| 624 | break; |
| 625 | case 1: |
| 626 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); |
| 627 | rt61pci_bbp_write(rt2x00dev, 77, r77); |
| 628 | rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0); |
| 629 | break; |
| 630 | case 2: |
| 631 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); |
| 632 | rt61pci_bbp_write(rt2x00dev, 77, r77); |
| 633 | rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); |
| 634 | break; |
| 635 | case 3: |
| 636 | rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); |
| 637 | rt61pci_bbp_write(rt2x00dev, 77, r77); |
| 638 | rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); |
| 639 | break; |
| 640 | } |
| 641 | } |
| 642 | |
| 643 | rt61pci_bbp_write(rt2x00dev, 3, r3); |
| 644 | rt61pci_bbp_write(rt2x00dev, 4, r4); |
| 645 | } |
| 646 | |
| 647 | struct antenna_sel { |
| 648 | u8 word; |
| 649 | /* |
| 650 | * value[0] -> non-LNA |
| 651 | * value[1] -> LNA |
| 652 | */ |
| 653 | u8 value[2]; |
| 654 | }; |
| 655 | |
| 656 | static const struct antenna_sel antenna_sel_a[] = { |
| 657 | { 96, { 0x58, 0x78 } }, |
| 658 | { 104, { 0x38, 0x48 } }, |
| 659 | { 75, { 0xfe, 0x80 } }, |
| 660 | { 86, { 0xfe, 0x80 } }, |
| 661 | { 88, { 0xfe, 0x80 } }, |
| 662 | { 35, { 0x60, 0x60 } }, |
| 663 | { 97, { 0x58, 0x58 } }, |
| 664 | { 98, { 0x58, 0x58 } }, |
| 665 | }; |
| 666 | |
| 667 | static const struct antenna_sel antenna_sel_bg[] = { |
| 668 | { 96, { 0x48, 0x68 } }, |
| 669 | { 104, { 0x2c, 0x3c } }, |
| 670 | { 75, { 0xfe, 0x80 } }, |
| 671 | { 86, { 0xfe, 0x80 } }, |
| 672 | { 88, { 0xfe, 0x80 } }, |
| 673 | { 35, { 0x50, 0x50 } }, |
| 674 | { 97, { 0x48, 0x48 } }, |
| 675 | { 98, { 0x48, 0x48 } }, |
| 676 | }; |
| 677 | |
| 678 | static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev, |
| 679 | const int antenna_tx, const int antenna_rx) |
| 680 | { |
| 681 | const struct antenna_sel *sel; |
| 682 | unsigned int lna; |
| 683 | unsigned int i; |
| 684 | u32 reg; |
| 685 | |
| 686 | rt2x00pci_register_read(rt2x00dev, PHY_CSR0, ®); |
| 687 | |
| 688 | if (rt2x00dev->curr_hwmode == HWMODE_A) { |
| 689 | sel = antenna_sel_a; |
| 690 | lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); |
| 691 | |
| 692 | rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 0); |
| 693 | rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 1); |
| 694 | } else { |
| 695 | sel = antenna_sel_bg; |
| 696 | lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); |
| 697 | |
| 698 | rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 1); |
| 699 | rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 0); |
| 700 | } |
| 701 | |
| 702 | for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) |
| 703 | rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]); |
| 704 | |
| 705 | rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg); |
| 706 | |
| 707 | if (rt2x00_rf(&rt2x00dev->chip, RF5225) || |
| 708 | rt2x00_rf(&rt2x00dev->chip, RF5325)) |
| 709 | rt61pci_config_antenna_5x(rt2x00dev, antenna_tx, antenna_rx); |
| 710 | else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) |
| 711 | rt61pci_config_antenna_2x(rt2x00dev, antenna_tx, antenna_rx); |
| 712 | else if (rt2x00_rf(&rt2x00dev->chip, RF2529)) { |
| 713 | if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) |
| 714 | rt61pci_config_antenna_2x(rt2x00dev, antenna_tx, |
| 715 | antenna_rx); |
| 716 | else |
| 717 | rt61pci_config_antenna_2529(rt2x00dev, antenna_tx, |
| 718 | antenna_rx); |
| 719 | } |
| 720 | } |
| 721 | |
| 722 | static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev, |
| 723 | const int short_slot_time, |
| 724 | const int beacon_int) |
| 725 | { |
| 726 | u32 reg; |
| 727 | |
| 728 | rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); |
| 729 | rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, |
| 730 | short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME); |
| 731 | rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); |
| 732 | |
| 733 | rt2x00pci_register_read(rt2x00dev, MAC_CSR8, ®); |
| 734 | rt2x00_set_field32(®, MAC_CSR8_SIFS, SIFS); |
| 735 | rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); |
| 736 | rt2x00_set_field32(®, MAC_CSR8_EIFS, EIFS); |
| 737 | rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg); |
| 738 | |
| 739 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); |
| 740 | rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); |
| 741 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); |
| 742 | |
| 743 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); |
| 744 | rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); |
| 745 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); |
| 746 | |
| 747 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); |
| 748 | rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, beacon_int * 16); |
| 749 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); |
| 750 | } |
| 751 | |
| 752 | static void rt61pci_config(struct rt2x00_dev *rt2x00dev, |
| 753 | const unsigned int flags, |
| 754 | struct ieee80211_conf *conf) |
| 755 | { |
| 756 | int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; |
| 757 | |
| 758 | if (flags & CONFIG_UPDATE_PHYMODE) |
| 759 | rt61pci_config_phymode(rt2x00dev, conf->phymode); |
| 760 | if (flags & CONFIG_UPDATE_CHANNEL) |
| 761 | rt61pci_config_channel(rt2x00dev, conf->channel_val, |
| 762 | conf->channel, conf->power_level); |
| 763 | if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) |
| 764 | rt61pci_config_txpower(rt2x00dev, conf->power_level); |
| 765 | if (flags & CONFIG_UPDATE_ANTENNA) |
| 766 | rt61pci_config_antenna(rt2x00dev, conf->antenna_sel_tx, |
| 767 | conf->antenna_sel_rx); |
| 768 | if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) |
| 769 | rt61pci_config_duration(rt2x00dev, short_slot_time, |
| 770 | conf->beacon_int); |
| 771 | } |
| 772 | |
| 773 | /* |
| 774 | * LED functions. |
| 775 | */ |
| 776 | static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev) |
| 777 | { |
| 778 | u32 reg; |
| 779 | u16 led_reg; |
| 780 | u8 arg0; |
| 781 | u8 arg1; |
| 782 | |
| 783 | rt2x00pci_register_read(rt2x00dev, MAC_CSR14, ®); |
| 784 | rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70); |
| 785 | rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30); |
| 786 | rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg); |
| 787 | |
| 788 | led_reg = rt2x00dev->led_reg; |
| 789 | rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 1); |
| 790 | if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) |
| 791 | rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 1); |
| 792 | else |
| 793 | rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 1); |
| 794 | |
| 795 | arg0 = led_reg & 0xff; |
| 796 | arg1 = (led_reg >> 8) & 0xff; |
| 797 | |
| 798 | rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1); |
| 799 | } |
| 800 | |
| 801 | static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev) |
| 802 | { |
| 803 | u16 led_reg; |
| 804 | u8 arg0; |
| 805 | u8 arg1; |
| 806 | |
| 807 | led_reg = rt2x00dev->led_reg; |
| 808 | rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0); |
| 809 | rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0); |
| 810 | rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0); |
| 811 | |
| 812 | arg0 = led_reg & 0xff; |
| 813 | arg1 = (led_reg >> 8) & 0xff; |
| 814 | |
| 815 | rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1); |
| 816 | } |
| 817 | |
| 818 | static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi) |
| 819 | { |
| 820 | u8 led; |
| 821 | |
| 822 | if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH) |
| 823 | return; |
| 824 | |
| 825 | /* |
| 826 | * Led handling requires a positive value for the rssi, |
| 827 | * to do that correctly we need to add the correction. |
| 828 | */ |
| 829 | rssi += rt2x00dev->rssi_offset; |
| 830 | |
| 831 | if (rssi <= 30) |
| 832 | led = 0; |
| 833 | else if (rssi <= 39) |
| 834 | led = 1; |
| 835 | else if (rssi <= 49) |
| 836 | led = 2; |
| 837 | else if (rssi <= 53) |
| 838 | led = 3; |
| 839 | else if (rssi <= 63) |
| 840 | led = 4; |
| 841 | else |
| 842 | led = 5; |
| 843 | |
| 844 | rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0); |
| 845 | } |
| 846 | |
| 847 | /* |
| 848 | * Link tuning |
| 849 | */ |
| 850 | static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev) |
| 851 | { |
| 852 | u32 reg; |
| 853 | |
| 854 | /* |
| 855 | * Update FCS error count from register. |
| 856 | */ |
| 857 | rt2x00pci_register_read(rt2x00dev, STA_CSR0, ®); |
| 858 | rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR); |
| 859 | |
| 860 | /* |
| 861 | * Update False CCA count from register. |
| 862 | */ |
| 863 | rt2x00pci_register_read(rt2x00dev, STA_CSR1, ®); |
| 864 | rt2x00dev->link.false_cca = |
| 865 | rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); |
| 866 | } |
| 867 | |
| 868 | static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev) |
| 869 | { |
| 870 | rt61pci_bbp_write(rt2x00dev, 17, 0x20); |
| 871 | rt2x00dev->link.vgc_level = 0x20; |
| 872 | } |
| 873 | |
| 874 | static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) |
| 875 | { |
| 876 | int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); |
| 877 | u8 r17; |
| 878 | u8 up_bound; |
| 879 | u8 low_bound; |
| 880 | |
| 881 | /* |
| 882 | * Update Led strength |
| 883 | */ |
| 884 | rt61pci_activity_led(rt2x00dev, rssi); |
| 885 | |
| 886 | rt61pci_bbp_read(rt2x00dev, 17, &r17); |
| 887 | |
| 888 | /* |
| 889 | * Determine r17 bounds. |
| 890 | */ |
| 891 | if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { |
| 892 | low_bound = 0x28; |
| 893 | up_bound = 0x48; |
| 894 | if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { |
| 895 | low_bound += 0x10; |
| 896 | up_bound += 0x10; |
| 897 | } |
| 898 | } else { |
| 899 | low_bound = 0x20; |
| 900 | up_bound = 0x40; |
| 901 | if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { |
| 902 | low_bound += 0x10; |
| 903 | up_bound += 0x10; |
| 904 | } |
| 905 | } |
| 906 | |
| 907 | /* |
| 908 | * Special big-R17 for very short distance |
| 909 | */ |
| 910 | if (rssi >= -35) { |
| 911 | if (r17 != 0x60) |
| 912 | rt61pci_bbp_write(rt2x00dev, 17, 0x60); |
| 913 | return; |
| 914 | } |
| 915 | |
| 916 | /* |
| 917 | * Special big-R17 for short distance |
| 918 | */ |
| 919 | if (rssi >= -58) { |
| 920 | if (r17 != up_bound) |
| 921 | rt61pci_bbp_write(rt2x00dev, 17, up_bound); |
| 922 | return; |
| 923 | } |
| 924 | |
| 925 | /* |
| 926 | * Special big-R17 for middle-short distance |
| 927 | */ |
| 928 | if (rssi >= -66) { |
| 929 | low_bound += 0x10; |
| 930 | if (r17 != low_bound) |
| 931 | rt61pci_bbp_write(rt2x00dev, 17, low_bound); |
| 932 | return; |
| 933 | } |
| 934 | |
| 935 | /* |
| 936 | * Special mid-R17 for middle distance |
| 937 | */ |
| 938 | if (rssi >= -74) { |
| 939 | low_bound += 0x08; |
| 940 | if (r17 != low_bound) |
| 941 | rt61pci_bbp_write(rt2x00dev, 17, low_bound); |
| 942 | return; |
| 943 | } |
| 944 | |
| 945 | /* |
| 946 | * Special case: Change up_bound based on the rssi. |
| 947 | * Lower up_bound when rssi is weaker then -74 dBm. |
| 948 | */ |
| 949 | up_bound -= 2 * (-74 - rssi); |
| 950 | if (low_bound > up_bound) |
| 951 | up_bound = low_bound; |
| 952 | |
| 953 | if (r17 > up_bound) { |
| 954 | rt61pci_bbp_write(rt2x00dev, 17, up_bound); |
| 955 | return; |
| 956 | } |
| 957 | |
| 958 | /* |
| 959 | * r17 does not yet exceed upper limit, continue and base |
| 960 | * the r17 tuning on the false CCA count. |
| 961 | */ |
| 962 | if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) { |
| 963 | if (++r17 > up_bound) |
| 964 | r17 = up_bound; |
| 965 | rt61pci_bbp_write(rt2x00dev, 17, r17); |
| 966 | } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) { |
| 967 | if (--r17 < low_bound) |
| 968 | r17 = low_bound; |
| 969 | rt61pci_bbp_write(rt2x00dev, 17, r17); |
| 970 | } |
| 971 | } |
| 972 | |
| 973 | /* |
| 974 | * Firmware name function. |
| 975 | */ |
| 976 | static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) |
| 977 | { |
| 978 | char *fw_name; |
| 979 | |
| 980 | switch (rt2x00dev->chip.rt) { |
| 981 | case RT2561: |
| 982 | fw_name = FIRMWARE_RT2561; |
| 983 | break; |
| 984 | case RT2561s: |
| 985 | fw_name = FIRMWARE_RT2561s; |
| 986 | break; |
| 987 | case RT2661: |
| 988 | fw_name = FIRMWARE_RT2661; |
| 989 | break; |
| 990 | default: |
| 991 | fw_name = NULL; |
| 992 | break; |
| 993 | } |
| 994 | |
| 995 | return fw_name; |
| 996 | } |
| 997 | |
| 998 | /* |
| 999 | * Initialization functions. |
| 1000 | */ |
| 1001 | static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, |
| 1002 | const size_t len) |
| 1003 | { |
| 1004 | int i; |
| 1005 | u32 reg; |
| 1006 | |
| 1007 | /* |
| 1008 | * Wait for stable hardware. |
| 1009 | */ |
| 1010 | for (i = 0; i < 100; i++) { |
| 1011 | rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); |
| 1012 | if (reg) |
| 1013 | break; |
| 1014 | msleep(1); |
| 1015 | } |
| 1016 | |
| 1017 | if (!reg) { |
| 1018 | ERROR(rt2x00dev, "Unstable hardware.\n"); |
| 1019 | return -EBUSY; |
| 1020 | } |
| 1021 | |
| 1022 | /* |
| 1023 | * Prepare MCU and mailbox for firmware loading. |
| 1024 | */ |
| 1025 | reg = 0; |
| 1026 | rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 1); |
| 1027 | rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); |
| 1028 | rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); |
| 1029 | rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); |
| 1030 | rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, 0); |
| 1031 | |
| 1032 | /* |
| 1033 | * Write firmware to device. |
| 1034 | */ |
| 1035 | reg = 0; |
| 1036 | rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 1); |
| 1037 | rt2x00_set_field32(®, MCU_CNTL_CSR_SELECT_BANK, 1); |
| 1038 | rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); |
| 1039 | |
| 1040 | rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, |
| 1041 | data, len); |
| 1042 | |
| 1043 | rt2x00_set_field32(®, MCU_CNTL_CSR_SELECT_BANK, 0); |
| 1044 | rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); |
| 1045 | |
| 1046 | rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 0); |
| 1047 | rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); |
| 1048 | |
| 1049 | for (i = 0; i < 100; i++) { |
| 1050 | rt2x00pci_register_read(rt2x00dev, MCU_CNTL_CSR, ®); |
| 1051 | if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY)) |
| 1052 | break; |
| 1053 | msleep(1); |
| 1054 | } |
| 1055 | |
| 1056 | if (i == 100) { |
| 1057 | ERROR(rt2x00dev, "MCU Control register not ready.\n"); |
| 1058 | return -EBUSY; |
| 1059 | } |
| 1060 | |
| 1061 | /* |
| 1062 | * Reset MAC and BBP registers. |
| 1063 | */ |
| 1064 | reg = 0; |
| 1065 | rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); |
| 1066 | rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); |
| 1067 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); |
| 1068 | |
| 1069 | rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); |
| 1070 | rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); |
| 1071 | rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); |
| 1072 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); |
| 1073 | |
| 1074 | rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); |
| 1075 | rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); |
| 1076 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); |
| 1077 | |
| 1078 | return 0; |
| 1079 | } |
| 1080 | |
| 1081 | static void rt61pci_init_rxring(struct rt2x00_dev *rt2x00dev) |
| 1082 | { |
| 1083 | struct data_ring *ring = rt2x00dev->rx; |
| 1084 | struct data_desc *rxd; |
| 1085 | unsigned int i; |
| 1086 | u32 word; |
| 1087 | |
| 1088 | memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); |
| 1089 | |
| 1090 | for (i = 0; i < ring->stats.limit; i++) { |
| 1091 | rxd = ring->entry[i].priv; |
| 1092 | |
| 1093 | rt2x00_desc_read(rxd, 5, &word); |
| 1094 | rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, |
| 1095 | ring->entry[i].data_dma); |
| 1096 | rt2x00_desc_write(rxd, 5, word); |
| 1097 | |
| 1098 | rt2x00_desc_read(rxd, 0, &word); |
| 1099 | rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); |
| 1100 | rt2x00_desc_write(rxd, 0, word); |
| 1101 | } |
| 1102 | |
| 1103 | rt2x00_ring_index_clear(rt2x00dev->rx); |
| 1104 | } |
| 1105 | |
| 1106 | static void rt61pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue) |
| 1107 | { |
| 1108 | struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); |
| 1109 | struct data_desc *txd; |
| 1110 | unsigned int i; |
| 1111 | u32 word; |
| 1112 | |
| 1113 | memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); |
| 1114 | |
| 1115 | for (i = 0; i < ring->stats.limit; i++) { |
| 1116 | txd = ring->entry[i].priv; |
| 1117 | |
| 1118 | rt2x00_desc_read(txd, 1, &word); |
| 1119 | rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); |
| 1120 | rt2x00_desc_write(txd, 1, word); |
| 1121 | |
| 1122 | rt2x00_desc_read(txd, 5, &word); |
| 1123 | rt2x00_set_field32(&word, TXD_W5_PID_TYPE, queue); |
| 1124 | rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, i); |
| 1125 | rt2x00_desc_write(txd, 5, word); |
| 1126 | |
| 1127 | rt2x00_desc_read(txd, 6, &word); |
| 1128 | rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, |
| 1129 | ring->entry[i].data_dma); |
| 1130 | rt2x00_desc_write(txd, 6, word); |
| 1131 | |
| 1132 | rt2x00_desc_read(txd, 0, &word); |
| 1133 | rt2x00_set_field32(&word, TXD_W0_VALID, 0); |
| 1134 | rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); |
| 1135 | rt2x00_desc_write(txd, 0, word); |
| 1136 | } |
| 1137 | |
| 1138 | rt2x00_ring_index_clear(ring); |
| 1139 | } |
| 1140 | |
| 1141 | static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) |
| 1142 | { |
| 1143 | u32 reg; |
| 1144 | |
| 1145 | /* |
| 1146 | * Initialize rings. |
| 1147 | */ |
| 1148 | rt61pci_init_rxring(rt2x00dev); |
| 1149 | rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); |
| 1150 | rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); |
| 1151 | rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA2); |
| 1152 | rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA3); |
| 1153 | rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA4); |
| 1154 | |
| 1155 | /* |
| 1156 | * Initialize registers. |
| 1157 | */ |
| 1158 | rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, ®); |
| 1159 | rt2x00_set_field32(®, TX_RING_CSR0_AC0_RING_SIZE, |
| 1160 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); |
| 1161 | rt2x00_set_field32(®, TX_RING_CSR0_AC1_RING_SIZE, |
| 1162 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); |
| 1163 | rt2x00_set_field32(®, TX_RING_CSR0_AC2_RING_SIZE, |
| 1164 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].stats.limit); |
| 1165 | rt2x00_set_field32(®, TX_RING_CSR0_AC3_RING_SIZE, |
| 1166 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].stats.limit); |
| 1167 | rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg); |
| 1168 | |
| 1169 | rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, ®); |
| 1170 | rt2x00_set_field32(®, TX_RING_CSR1_MGMT_RING_SIZE, |
| 1171 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].stats.limit); |
| 1172 | rt2x00_set_field32(®, TX_RING_CSR1_TXD_SIZE, |
| 1173 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size / |
| 1174 | 4); |
| 1175 | rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg); |
| 1176 | |
| 1177 | rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, ®); |
| 1178 | rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER, |
| 1179 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); |
| 1180 | rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg); |
| 1181 | |
| 1182 | rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, ®); |
| 1183 | rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER, |
| 1184 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); |
| 1185 | rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg); |
| 1186 | |
| 1187 | rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, ®); |
| 1188 | rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER, |
| 1189 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].data_dma); |
| 1190 | rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg); |
| 1191 | |
| 1192 | rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, ®); |
| 1193 | rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER, |
| 1194 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].data_dma); |
| 1195 | rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg); |
| 1196 | |
| 1197 | rt2x00pci_register_read(rt2x00dev, MGMT_BASE_CSR, ®); |
| 1198 | rt2x00_set_field32(®, MGMT_BASE_CSR_RING_REGISTER, |
| 1199 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].data_dma); |
| 1200 | rt2x00pci_register_write(rt2x00dev, MGMT_BASE_CSR, reg); |
| 1201 | |
| 1202 | rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, ®); |
| 1203 | rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE, |
| 1204 | rt2x00dev->rx->stats.limit); |
| 1205 | rt2x00_set_field32(®, RX_RING_CSR_RXD_SIZE, |
| 1206 | rt2x00dev->rx->desc_size / 4); |
| 1207 | rt2x00_set_field32(®, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4); |
| 1208 | rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg); |
| 1209 | |
| 1210 | rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, ®); |
| 1211 | rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER, |
| 1212 | rt2x00dev->rx->data_dma); |
| 1213 | rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg); |
| 1214 | |
| 1215 | rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, ®); |
| 1216 | rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC0, 2); |
| 1217 | rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC1, 2); |
| 1218 | rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC2, 2); |
| 1219 | rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC3, 2); |
| 1220 | rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_MGMT, 0); |
| 1221 | rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg); |
| 1222 | |
| 1223 | rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, ®); |
| 1224 | rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1); |
| 1225 | rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1); |
| 1226 | rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1); |
| 1227 | rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1); |
| 1228 | rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_MGMT, 1); |
| 1229 | rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg); |
| 1230 | |
| 1231 | rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®); |
| 1232 | rt2x00_set_field32(®, RX_CNTL_CSR_LOAD_RXD, 1); |
| 1233 | rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg); |
| 1234 | |
| 1235 | return 0; |
| 1236 | } |
| 1237 | |
| 1238 | static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) |
| 1239 | { |
| 1240 | u32 reg; |
| 1241 | |
| 1242 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); |
| 1243 | rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1); |
| 1244 | rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); |
| 1245 | rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0); |
| 1246 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); |
| 1247 | |
| 1248 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR1, ®); |
| 1249 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */ |
| 1250 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1); |
| 1251 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */ |
| 1252 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1_VALID, 1); |
| 1253 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */ |
| 1254 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1); |
| 1255 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */ |
| 1256 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1); |
| 1257 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR1, reg); |
| 1258 | |
| 1259 | /* |
| 1260 | * CCK TXD BBP registers |
| 1261 | */ |
| 1262 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR2, ®); |
| 1263 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13); |
| 1264 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1); |
| 1265 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12); |
| 1266 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1_VALID, 1); |
| 1267 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2, 11); |
| 1268 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1); |
| 1269 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10); |
| 1270 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1); |
| 1271 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR2, reg); |
| 1272 | |
| 1273 | /* |
| 1274 | * OFDM TXD BBP registers |
| 1275 | */ |
| 1276 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR3, ®); |
| 1277 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7); |
| 1278 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1); |
| 1279 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6); |
| 1280 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1); |
| 1281 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5); |
| 1282 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1); |
| 1283 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR3, reg); |
| 1284 | |
| 1285 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR7, ®); |
| 1286 | rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59); |
| 1287 | rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53); |
| 1288 | rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49); |
| 1289 | rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46); |
| 1290 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR7, reg); |
| 1291 | |
| 1292 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR8, ®); |
| 1293 | rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44); |
| 1294 | rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42); |
| 1295 | rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42); |
| 1296 | rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); |
| 1297 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg); |
| 1298 | |
| 1299 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); |
| 1300 | |
| 1301 | rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff); |
| 1302 | |
| 1303 | rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); |
| 1304 | rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); |
| 1305 | rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); |
| 1306 | |
| 1307 | rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x0000071c); |
| 1308 | |
| 1309 | if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) |
| 1310 | return -EBUSY; |
| 1311 | |
| 1312 | rt2x00pci_register_write(rt2x00dev, MAC_CSR13, 0x0000e000); |
| 1313 | |
| 1314 | /* |
| 1315 | * Invalidate all Shared Keys (SEC_CSR0), |
| 1316 | * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5) |
| 1317 | */ |
| 1318 | rt2x00pci_register_write(rt2x00dev, SEC_CSR0, 0x00000000); |
| 1319 | rt2x00pci_register_write(rt2x00dev, SEC_CSR1, 0x00000000); |
| 1320 | rt2x00pci_register_write(rt2x00dev, SEC_CSR5, 0x00000000); |
| 1321 | |
| 1322 | rt2x00pci_register_write(rt2x00dev, PHY_CSR1, 0x000023b0); |
| 1323 | rt2x00pci_register_write(rt2x00dev, PHY_CSR5, 0x060a100c); |
| 1324 | rt2x00pci_register_write(rt2x00dev, PHY_CSR6, 0x00080606); |
| 1325 | rt2x00pci_register_write(rt2x00dev, PHY_CSR7, 0x00000a08); |
| 1326 | |
| 1327 | rt2x00pci_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404); |
| 1328 | |
| 1329 | rt2x00pci_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200); |
| 1330 | |
| 1331 | rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); |
| 1332 | |
| 1333 | rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); |
| 1334 | rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0); |
| 1335 | rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0); |
| 1336 | rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); |
| 1337 | |
| 1338 | rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); |
| 1339 | rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192); |
| 1340 | rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48); |
| 1341 | rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); |
| 1342 | |
| 1343 | /* |
| 1344 | * We must clear the error counters. |
| 1345 | * These registers are cleared on read, |
| 1346 | * so we may pass a useless variable to store the value. |
| 1347 | */ |
| 1348 | rt2x00pci_register_read(rt2x00dev, STA_CSR0, ®); |
| 1349 | rt2x00pci_register_read(rt2x00dev, STA_CSR1, ®); |
| 1350 | rt2x00pci_register_read(rt2x00dev, STA_CSR2, ®); |
| 1351 | |
| 1352 | /* |
| 1353 | * Reset MAC and BBP registers. |
| 1354 | */ |
| 1355 | rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); |
| 1356 | rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); |
| 1357 | rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); |
| 1358 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); |
| 1359 | |
| 1360 | rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); |
| 1361 | rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); |
| 1362 | rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); |
| 1363 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); |
| 1364 | |
| 1365 | rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); |
| 1366 | rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); |
| 1367 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); |
| 1368 | |
| 1369 | return 0; |
| 1370 | } |
| 1371 | |
| 1372 | static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev) |
| 1373 | { |
| 1374 | unsigned int i; |
| 1375 | u16 eeprom; |
| 1376 | u8 reg_id; |
| 1377 | u8 value; |
| 1378 | |
| 1379 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
| 1380 | rt61pci_bbp_read(rt2x00dev, 0, &value); |
| 1381 | if ((value != 0xff) && (value != 0x00)) |
| 1382 | goto continue_csr_init; |
| 1383 | NOTICE(rt2x00dev, "Waiting for BBP register.\n"); |
| 1384 | udelay(REGISTER_BUSY_DELAY); |
| 1385 | } |
| 1386 | |
| 1387 | ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); |
| 1388 | return -EACCES; |
| 1389 | |
| 1390 | continue_csr_init: |
| 1391 | rt61pci_bbp_write(rt2x00dev, 3, 0x00); |
| 1392 | rt61pci_bbp_write(rt2x00dev, 15, 0x30); |
| 1393 | rt61pci_bbp_write(rt2x00dev, 21, 0xc8); |
| 1394 | rt61pci_bbp_write(rt2x00dev, 22, 0x38); |
| 1395 | rt61pci_bbp_write(rt2x00dev, 23, 0x06); |
| 1396 | rt61pci_bbp_write(rt2x00dev, 24, 0xfe); |
| 1397 | rt61pci_bbp_write(rt2x00dev, 25, 0x0a); |
| 1398 | rt61pci_bbp_write(rt2x00dev, 26, 0x0d); |
| 1399 | rt61pci_bbp_write(rt2x00dev, 34, 0x12); |
| 1400 | rt61pci_bbp_write(rt2x00dev, 37, 0x07); |
| 1401 | rt61pci_bbp_write(rt2x00dev, 39, 0xf8); |
| 1402 | rt61pci_bbp_write(rt2x00dev, 41, 0x60); |
| 1403 | rt61pci_bbp_write(rt2x00dev, 53, 0x10); |
| 1404 | rt61pci_bbp_write(rt2x00dev, 54, 0x18); |
| 1405 | rt61pci_bbp_write(rt2x00dev, 60, 0x10); |
| 1406 | rt61pci_bbp_write(rt2x00dev, 61, 0x04); |
| 1407 | rt61pci_bbp_write(rt2x00dev, 62, 0x04); |
| 1408 | rt61pci_bbp_write(rt2x00dev, 75, 0xfe); |
| 1409 | rt61pci_bbp_write(rt2x00dev, 86, 0xfe); |
| 1410 | rt61pci_bbp_write(rt2x00dev, 88, 0xfe); |
| 1411 | rt61pci_bbp_write(rt2x00dev, 90, 0x0f); |
| 1412 | rt61pci_bbp_write(rt2x00dev, 99, 0x00); |
| 1413 | rt61pci_bbp_write(rt2x00dev, 102, 0x16); |
| 1414 | rt61pci_bbp_write(rt2x00dev, 107, 0x04); |
| 1415 | |
| 1416 | DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); |
| 1417 | for (i = 0; i < EEPROM_BBP_SIZE; i++) { |
| 1418 | rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); |
| 1419 | |
| 1420 | if (eeprom != 0xffff && eeprom != 0x0000) { |
| 1421 | reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); |
| 1422 | value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); |
| 1423 | DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", |
| 1424 | reg_id, value); |
| 1425 | rt61pci_bbp_write(rt2x00dev, reg_id, value); |
| 1426 | } |
| 1427 | } |
| 1428 | DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); |
| 1429 | |
| 1430 | return 0; |
| 1431 | } |
| 1432 | |
| 1433 | /* |
| 1434 | * Device state switch handlers. |
| 1435 | */ |
| 1436 | static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev, |
| 1437 | enum dev_state state) |
| 1438 | { |
| 1439 | u32 reg; |
| 1440 | |
| 1441 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); |
| 1442 | rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, |
| 1443 | state == STATE_RADIO_RX_OFF); |
| 1444 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); |
| 1445 | } |
| 1446 | |
| 1447 | static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev, |
| 1448 | enum dev_state state) |
| 1449 | { |
| 1450 | int mask = (state == STATE_RADIO_IRQ_OFF); |
| 1451 | u32 reg; |
| 1452 | |
| 1453 | /* |
| 1454 | * When interrupts are being enabled, the interrupt registers |
| 1455 | * should clear the register to assure a clean state. |
| 1456 | */ |
| 1457 | if (state == STATE_RADIO_IRQ_ON) { |
| 1458 | rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); |
| 1459 | rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); |
| 1460 | |
| 1461 | rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®); |
| 1462 | rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg); |
| 1463 | } |
| 1464 | |
| 1465 | /* |
| 1466 | * Only toggle the interrupts bits we are going to use. |
| 1467 | * Non-checked interrupt bits are disabled by default. |
| 1468 | */ |
| 1469 | rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®); |
| 1470 | rt2x00_set_field32(®, INT_MASK_CSR_TXDONE, mask); |
| 1471 | rt2x00_set_field32(®, INT_MASK_CSR_RXDONE, mask); |
| 1472 | rt2x00_set_field32(®, INT_MASK_CSR_ENABLE_MITIGATION, mask); |
| 1473 | rt2x00_set_field32(®, INT_MASK_CSR_MITIGATION_PERIOD, 0xff); |
| 1474 | rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg); |
| 1475 | |
| 1476 | rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, ®); |
| 1477 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_0, mask); |
| 1478 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_1, mask); |
| 1479 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_2, mask); |
| 1480 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_3, mask); |
| 1481 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_4, mask); |
| 1482 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_5, mask); |
| 1483 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_6, mask); |
| 1484 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_7, mask); |
| 1485 | rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg); |
| 1486 | } |
| 1487 | |
| 1488 | static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) |
| 1489 | { |
| 1490 | u32 reg; |
| 1491 | |
| 1492 | /* |
| 1493 | * Initialize all registers. |
| 1494 | */ |
| 1495 | if (rt61pci_init_rings(rt2x00dev) || |
| 1496 | rt61pci_init_registers(rt2x00dev) || |
| 1497 | rt61pci_init_bbp(rt2x00dev)) { |
| 1498 | ERROR(rt2x00dev, "Register initialization failed.\n"); |
| 1499 | return -EIO; |
| 1500 | } |
| 1501 | |
| 1502 | /* |
| 1503 | * Enable interrupts. |
| 1504 | */ |
| 1505 | rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); |
| 1506 | |
| 1507 | /* |
| 1508 | * Enable RX. |
| 1509 | */ |
| 1510 | rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®); |
| 1511 | rt2x00_set_field32(®, RX_CNTL_CSR_ENABLE_RX_DMA, 1); |
| 1512 | rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg); |
| 1513 | |
| 1514 | /* |
| 1515 | * Enable LED |
| 1516 | */ |
| 1517 | rt61pci_enable_led(rt2x00dev); |
| 1518 | |
| 1519 | return 0; |
| 1520 | } |
| 1521 | |
| 1522 | static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) |
| 1523 | { |
| 1524 | u32 reg; |
| 1525 | |
| 1526 | /* |
| 1527 | * Disable LED |
| 1528 | */ |
| 1529 | rt61pci_disable_led(rt2x00dev); |
| 1530 | |
| 1531 | rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818); |
| 1532 | |
| 1533 | /* |
| 1534 | * Disable synchronisation. |
| 1535 | */ |
| 1536 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); |
| 1537 | |
| 1538 | /* |
| 1539 | * Cancel RX and TX. |
| 1540 | */ |
| 1541 | rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); |
| 1542 | rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC0, 1); |
| 1543 | rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, 1); |
| 1544 | rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1); |
| 1545 | rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1); |
| 1546 | rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_MGMT, 1); |
| 1547 | rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); |
| 1548 | |
| 1549 | /* |
| 1550 | * Disable interrupts. |
| 1551 | */ |
| 1552 | rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); |
| 1553 | } |
| 1554 | |
| 1555 | static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) |
| 1556 | { |
| 1557 | u32 reg; |
| 1558 | unsigned int i; |
| 1559 | char put_to_sleep; |
| 1560 | char current_state; |
| 1561 | |
| 1562 | put_to_sleep = (state != STATE_AWAKE); |
| 1563 | |
| 1564 | rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®); |
| 1565 | rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep); |
| 1566 | rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep); |
| 1567 | rt2x00pci_register_write(rt2x00dev, MAC_CSR12, reg); |
| 1568 | |
| 1569 | /* |
| 1570 | * Device is not guaranteed to be in the requested state yet. |
| 1571 | * We must wait until the register indicates that the |
| 1572 | * device has entered the correct state. |
| 1573 | */ |
| 1574 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
| 1575 | rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®); |
| 1576 | current_state = |
| 1577 | rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); |
| 1578 | if (current_state == !put_to_sleep) |
| 1579 | return 0; |
| 1580 | msleep(10); |
| 1581 | } |
| 1582 | |
| 1583 | NOTICE(rt2x00dev, "Device failed to enter state %d, " |
| 1584 | "current device state %d.\n", !put_to_sleep, current_state); |
| 1585 | |
| 1586 | return -EBUSY; |
| 1587 | } |
| 1588 | |
| 1589 | static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, |
| 1590 | enum dev_state state) |
| 1591 | { |
| 1592 | int retval = 0; |
| 1593 | |
| 1594 | switch (state) { |
| 1595 | case STATE_RADIO_ON: |
| 1596 | retval = rt61pci_enable_radio(rt2x00dev); |
| 1597 | break; |
| 1598 | case STATE_RADIO_OFF: |
| 1599 | rt61pci_disable_radio(rt2x00dev); |
| 1600 | break; |
| 1601 | case STATE_RADIO_RX_ON: |
| 1602 | case STATE_RADIO_RX_OFF: |
| 1603 | rt61pci_toggle_rx(rt2x00dev, state); |
| 1604 | break; |
| 1605 | case STATE_DEEP_SLEEP: |
| 1606 | case STATE_SLEEP: |
| 1607 | case STATE_STANDBY: |
| 1608 | case STATE_AWAKE: |
| 1609 | retval = rt61pci_set_state(rt2x00dev, state); |
| 1610 | break; |
| 1611 | default: |
| 1612 | retval = -ENOTSUPP; |
| 1613 | break; |
| 1614 | } |
| 1615 | |
| 1616 | return retval; |
| 1617 | } |
| 1618 | |
| 1619 | /* |
| 1620 | * TX descriptor initialization |
| 1621 | */ |
| 1622 | static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, |
| 1623 | struct data_desc *txd, |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 1624 | struct txdata_entry_desc *desc, |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 1625 | struct ieee80211_hdr *ieee80211hdr, |
| 1626 | unsigned int length, |
| 1627 | struct ieee80211_tx_control *control) |
| 1628 | { |
| 1629 | u32 word; |
| 1630 | |
| 1631 | /* |
| 1632 | * Start writing the descriptor words. |
| 1633 | */ |
| 1634 | rt2x00_desc_read(txd, 1, &word); |
| 1635 | rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue); |
| 1636 | rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs); |
| 1637 | rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); |
| 1638 | rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); |
| 1639 | rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); |
| 1640 | rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); |
| 1641 | rt2x00_desc_write(txd, 1, word); |
| 1642 | |
| 1643 | rt2x00_desc_read(txd, 2, &word); |
| 1644 | rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); |
| 1645 | rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); |
| 1646 | rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); |
| 1647 | rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); |
| 1648 | rt2x00_desc_write(txd, 2, word); |
| 1649 | |
| 1650 | rt2x00_desc_read(txd, 5, &word); |
| 1651 | rt2x00_set_field32(&word, TXD_W5_TX_POWER, |
| 1652 | TXPOWER_TO_DEV(control->power_level)); |
| 1653 | rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); |
| 1654 | rt2x00_desc_write(txd, 5, word); |
| 1655 | |
| 1656 | rt2x00_desc_read(txd, 11, &word); |
| 1657 | rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, length); |
| 1658 | rt2x00_desc_write(txd, 11, word); |
| 1659 | |
| 1660 | rt2x00_desc_read(txd, 0, &word); |
| 1661 | rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); |
| 1662 | rt2x00_set_field32(&word, TXD_W0_VALID, 1); |
| 1663 | rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, |
| 1664 | test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); |
| 1665 | rt2x00_set_field32(&word, TXD_W0_ACK, |
| 1666 | !(control->flags & IEEE80211_TXCTL_NO_ACK)); |
| 1667 | rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, |
| 1668 | test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); |
| 1669 | rt2x00_set_field32(&word, TXD_W0_OFDM, |
| 1670 | test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); |
| 1671 | rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); |
| 1672 | rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, |
| 1673 | !!(control->flags & |
| 1674 | IEEE80211_TXCTL_LONG_RETRY_LIMIT)); |
| 1675 | rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); |
| 1676 | rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); |
| 1677 | rt2x00_set_field32(&word, TXD_W0_BURST, |
| 1678 | test_bit(ENTRY_TXD_BURST, &desc->flags)); |
| 1679 | rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); |
| 1680 | rt2x00_desc_write(txd, 0, word); |
| 1681 | } |
| 1682 | |
| 1683 | /* |
| 1684 | * TX data initialization |
| 1685 | */ |
| 1686 | static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, |
| 1687 | unsigned int queue) |
| 1688 | { |
| 1689 | u32 reg; |
| 1690 | |
| 1691 | if (queue == IEEE80211_TX_QUEUE_BEACON) { |
| 1692 | /* |
| 1693 | * For Wi-Fi faily generated beacons between participating |
| 1694 | * stations. Set TBTT phase adaptive adjustment step to 8us. |
| 1695 | */ |
| 1696 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); |
| 1697 | |
| 1698 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); |
| 1699 | if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { |
| 1700 | rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); |
| 1701 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); |
| 1702 | } |
| 1703 | return; |
| 1704 | } |
| 1705 | |
| 1706 | rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); |
| 1707 | if (queue == IEEE80211_TX_QUEUE_DATA0) |
| 1708 | rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, 1); |
| 1709 | else if (queue == IEEE80211_TX_QUEUE_DATA1) |
| 1710 | rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, 1); |
| 1711 | else if (queue == IEEE80211_TX_QUEUE_DATA2) |
| 1712 | rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, 1); |
| 1713 | else if (queue == IEEE80211_TX_QUEUE_DATA3) |
| 1714 | rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, 1); |
| 1715 | else if (queue == IEEE80211_TX_QUEUE_DATA4) |
| 1716 | rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_MGMT, 1); |
| 1717 | rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); |
| 1718 | } |
| 1719 | |
| 1720 | /* |
| 1721 | * RX control handlers |
| 1722 | */ |
| 1723 | static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) |
| 1724 | { |
| 1725 | u16 eeprom; |
| 1726 | u8 offset; |
| 1727 | u8 lna; |
| 1728 | |
| 1729 | lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); |
| 1730 | switch (lna) { |
| 1731 | case 3: |
| 1732 | offset = 90; |
| 1733 | break; |
| 1734 | case 2: |
| 1735 | offset = 74; |
| 1736 | break; |
| 1737 | case 1: |
| 1738 | offset = 64; |
| 1739 | break; |
| 1740 | default: |
| 1741 | return 0; |
| 1742 | } |
| 1743 | |
| 1744 | if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { |
| 1745 | if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) |
| 1746 | offset += 14; |
| 1747 | |
| 1748 | if (lna == 3 || lna == 2) |
| 1749 | offset += 10; |
| 1750 | |
| 1751 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); |
| 1752 | offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); |
| 1753 | } else { |
| 1754 | if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) |
| 1755 | offset += 14; |
| 1756 | |
| 1757 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); |
| 1758 | offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); |
| 1759 | } |
| 1760 | |
| 1761 | return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; |
| 1762 | } |
| 1763 | |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 1764 | static void rt61pci_fill_rxdone(struct data_entry *entry, |
| 1765 | struct rxdata_entry_desc *desc) |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 1766 | { |
| 1767 | struct data_desc *rxd = entry->priv; |
| 1768 | u32 word0; |
| 1769 | u32 word1; |
| 1770 | |
| 1771 | rt2x00_desc_read(rxd, 0, &word0); |
| 1772 | rt2x00_desc_read(rxd, 1, &word1); |
| 1773 | |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 1774 | desc->flags = 0; |
| 1775 | if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) |
| 1776 | desc->flags |= RX_FLAG_FAILED_FCS_CRC; |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 1777 | |
| 1778 | /* |
| 1779 | * Obtain the status about this packet. |
| 1780 | */ |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 1781 | desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); |
| 1782 | desc->rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1); |
| 1783 | desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); |
| 1784 | desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 1785 | |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 1786 | return; |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 1787 | } |
| 1788 | |
| 1789 | /* |
| 1790 | * Interrupt functions. |
| 1791 | */ |
| 1792 | static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) |
| 1793 | { |
| 1794 | struct data_ring *ring; |
| 1795 | struct data_entry *entry; |
| 1796 | struct data_desc *txd; |
| 1797 | u32 word; |
| 1798 | u32 reg; |
| 1799 | u32 old_reg; |
| 1800 | int type; |
| 1801 | int index; |
| 1802 | int tx_status; |
| 1803 | int retry; |
| 1804 | |
| 1805 | /* |
| 1806 | * During each loop we will compare the freshly read |
| 1807 | * STA_CSR4 register value with the value read from |
| 1808 | * the previous loop. If the 2 values are equal then |
| 1809 | * we should stop processing because the chance it |
| 1810 | * quite big that the device has been unplugged and |
| 1811 | * we risk going into an endless loop. |
| 1812 | */ |
| 1813 | old_reg = 0; |
| 1814 | |
| 1815 | while (1) { |
| 1816 | rt2x00pci_register_read(rt2x00dev, STA_CSR4, ®); |
| 1817 | if (!rt2x00_get_field32(reg, STA_CSR4_VALID)) |
| 1818 | break; |
| 1819 | |
| 1820 | if (old_reg == reg) |
| 1821 | break; |
| 1822 | old_reg = reg; |
| 1823 | |
| 1824 | /* |
| 1825 | * Skip this entry when it contains an invalid |
| 1826 | * ring identication number. |
| 1827 | */ |
| 1828 | type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE); |
| 1829 | ring = rt2x00lib_get_ring(rt2x00dev, type); |
| 1830 | if (unlikely(!ring)) |
| 1831 | continue; |
| 1832 | |
| 1833 | /* |
| 1834 | * Skip this entry when it contains an invalid |
| 1835 | * index number. |
| 1836 | */ |
| 1837 | index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE); |
| 1838 | if (unlikely(index >= ring->stats.limit)) |
| 1839 | continue; |
| 1840 | |
| 1841 | entry = &ring->entry[index]; |
| 1842 | txd = entry->priv; |
| 1843 | rt2x00_desc_read(txd, 0, &word); |
| 1844 | |
| 1845 | if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || |
| 1846 | !rt2x00_get_field32(word, TXD_W0_VALID)) |
| 1847 | return; |
| 1848 | |
| 1849 | /* |
| 1850 | * Obtain the status about this packet. |
| 1851 | */ |
| 1852 | tx_status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT); |
| 1853 | retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); |
| 1854 | |
| 1855 | rt2x00lib_txdone(entry, tx_status, retry); |
| 1856 | |
| 1857 | /* |
| 1858 | * Make this entry available for reuse. |
| 1859 | */ |
| 1860 | entry->flags = 0; |
| 1861 | rt2x00_set_field32(&word, TXD_W0_VALID, 0); |
| 1862 | rt2x00_desc_write(txd, 0, word); |
| 1863 | rt2x00_ring_index_done_inc(entry->ring); |
| 1864 | |
| 1865 | /* |
| 1866 | * If the data ring was full before the txdone handler |
| 1867 | * we must make sure the packet queue in the mac80211 stack |
| 1868 | * is reenabled when the txdone handler has finished. |
| 1869 | */ |
| 1870 | if (!rt2x00_ring_full(ring)) |
| 1871 | ieee80211_wake_queue(rt2x00dev->hw, |
| 1872 | entry->tx_status.control.queue); |
| 1873 | } |
| 1874 | } |
| 1875 | |
| 1876 | static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) |
| 1877 | { |
| 1878 | struct rt2x00_dev *rt2x00dev = dev_instance; |
| 1879 | u32 reg_mcu; |
| 1880 | u32 reg; |
| 1881 | |
| 1882 | /* |
| 1883 | * Get the interrupt sources & saved to local variable. |
| 1884 | * Write register value back to clear pending interrupts. |
| 1885 | */ |
| 1886 | rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®_mcu); |
| 1887 | rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu); |
| 1888 | |
| 1889 | rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); |
| 1890 | rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); |
| 1891 | |
| 1892 | if (!reg && !reg_mcu) |
| 1893 | return IRQ_NONE; |
| 1894 | |
| 1895 | if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) |
| 1896 | return IRQ_HANDLED; |
| 1897 | |
| 1898 | /* |
| 1899 | * Handle interrupts, walk through all bits |
| 1900 | * and run the tasks, the bits are checked in order of |
| 1901 | * priority. |
| 1902 | */ |
| 1903 | |
| 1904 | /* |
| 1905 | * 1 - Rx ring done interrupt. |
| 1906 | */ |
| 1907 | if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE)) |
| 1908 | rt2x00pci_rxdone(rt2x00dev); |
| 1909 | |
| 1910 | /* |
| 1911 | * 2 - Tx ring done interrupt. |
| 1912 | */ |
| 1913 | if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE)) |
| 1914 | rt61pci_txdone(rt2x00dev); |
| 1915 | |
| 1916 | /* |
| 1917 | * 3 - Handle MCU command done. |
| 1918 | */ |
| 1919 | if (reg_mcu) |
| 1920 | rt2x00pci_register_write(rt2x00dev, |
| 1921 | M2H_CMD_DONE_CSR, 0xffffffff); |
| 1922 | |
| 1923 | return IRQ_HANDLED; |
| 1924 | } |
| 1925 | |
| 1926 | /* |
| 1927 | * Device probe functions. |
| 1928 | */ |
| 1929 | static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) |
| 1930 | { |
| 1931 | struct eeprom_93cx6 eeprom; |
| 1932 | u32 reg; |
| 1933 | u16 word; |
| 1934 | u8 *mac; |
| 1935 | s8 value; |
| 1936 | |
| 1937 | rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); |
| 1938 | |
| 1939 | eeprom.data = rt2x00dev; |
| 1940 | eeprom.register_read = rt61pci_eepromregister_read; |
| 1941 | eeprom.register_write = rt61pci_eepromregister_write; |
| 1942 | eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ? |
| 1943 | PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; |
| 1944 | eeprom.reg_data_in = 0; |
| 1945 | eeprom.reg_data_out = 0; |
| 1946 | eeprom.reg_data_clock = 0; |
| 1947 | eeprom.reg_chip_select = 0; |
| 1948 | |
| 1949 | eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, |
| 1950 | EEPROM_SIZE / sizeof(u16)); |
| 1951 | |
| 1952 | /* |
| 1953 | * Start validation of the data that has been read. |
| 1954 | */ |
| 1955 | mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); |
| 1956 | if (!is_valid_ether_addr(mac)) { |
Joe Perches | 0795af5 | 2007-10-03 17:59:30 -0700 | [diff] [blame] | 1957 | DECLARE_MAC_BUF(macbuf); |
| 1958 | |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 1959 | random_ether_addr(mac); |
Joe Perches | 0795af5 | 2007-10-03 17:59:30 -0700 | [diff] [blame] | 1960 | EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 1961 | } |
| 1962 | |
| 1963 | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); |
| 1964 | if (word == 0xffff) { |
| 1965 | rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); |
| 1966 | rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 2); |
| 1967 | rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 2); |
| 1968 | rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0); |
| 1969 | rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); |
| 1970 | rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); |
| 1971 | rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225); |
| 1972 | rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); |
| 1973 | EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); |
| 1974 | } |
| 1975 | |
| 1976 | rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); |
| 1977 | if (word == 0xffff) { |
| 1978 | rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0); |
| 1979 | rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0); |
| 1980 | rt2x00_set_field16(&word, EEPROM_NIC_TX_RX_FIXED, 0); |
| 1981 | rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); |
| 1982 | rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); |
| 1983 | rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); |
| 1984 | rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); |
| 1985 | EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); |
| 1986 | } |
| 1987 | |
| 1988 | rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word); |
| 1989 | if (word == 0xffff) { |
| 1990 | rt2x00_set_field16(&word, EEPROM_LED_LED_MODE, |
| 1991 | LED_MODE_DEFAULT); |
| 1992 | rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word); |
| 1993 | EEPROM(rt2x00dev, "Led: 0x%04x\n", word); |
| 1994 | } |
| 1995 | |
| 1996 | rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); |
| 1997 | if (word == 0xffff) { |
| 1998 | rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); |
| 1999 | rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0); |
| 2000 | rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); |
| 2001 | EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); |
| 2002 | } |
| 2003 | |
| 2004 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word); |
| 2005 | if (word == 0xffff) { |
| 2006 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); |
| 2007 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); |
| 2008 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); |
| 2009 | EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); |
| 2010 | } else { |
| 2011 | value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1); |
| 2012 | if (value < -10 || value > 10) |
| 2013 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); |
| 2014 | value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2); |
| 2015 | if (value < -10 || value > 10) |
| 2016 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); |
| 2017 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); |
| 2018 | } |
| 2019 | |
| 2020 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word); |
| 2021 | if (word == 0xffff) { |
| 2022 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); |
| 2023 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); |
| 2024 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); |
| 2025 | EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); |
| 2026 | } else { |
| 2027 | value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); |
| 2028 | if (value < -10 || value > 10) |
| 2029 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); |
| 2030 | value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2); |
| 2031 | if (value < -10 || value > 10) |
| 2032 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); |
| 2033 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); |
| 2034 | } |
| 2035 | |
| 2036 | return 0; |
| 2037 | } |
| 2038 | |
| 2039 | static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) |
| 2040 | { |
| 2041 | u32 reg; |
| 2042 | u16 value; |
| 2043 | u16 eeprom; |
| 2044 | u16 device; |
| 2045 | |
| 2046 | /* |
| 2047 | * Read EEPROM word for configuration. |
| 2048 | */ |
| 2049 | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); |
| 2050 | |
| 2051 | /* |
| 2052 | * Identify RF chipset. |
| 2053 | * To determine the RT chip we have to read the |
| 2054 | * PCI header of the device. |
| 2055 | */ |
| 2056 | pci_read_config_word(rt2x00dev_pci(rt2x00dev), |
| 2057 | PCI_CONFIG_HEADER_DEVICE, &device); |
| 2058 | value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); |
| 2059 | rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); |
| 2060 | rt2x00_set_chip(rt2x00dev, device, value, reg); |
| 2061 | |
| 2062 | if (!rt2x00_rf(&rt2x00dev->chip, RF5225) && |
| 2063 | !rt2x00_rf(&rt2x00dev->chip, RF5325) && |
| 2064 | !rt2x00_rf(&rt2x00dev->chip, RF2527) && |
| 2065 | !rt2x00_rf(&rt2x00dev->chip, RF2529)) { |
| 2066 | ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); |
| 2067 | return -ENODEV; |
| 2068 | } |
| 2069 | |
| 2070 | /* |
| 2071 | * Identify default antenna configuration. |
| 2072 | */ |
| 2073 | rt2x00dev->hw->conf.antenna_sel_tx = |
| 2074 | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); |
| 2075 | rt2x00dev->hw->conf.antenna_sel_rx = |
| 2076 | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); |
| 2077 | |
| 2078 | /* |
| 2079 | * Read the Frame type. |
| 2080 | */ |
| 2081 | if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE)) |
| 2082 | __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); |
| 2083 | |
| 2084 | /* |
| 2085 | * Determine number of antenna's. |
| 2086 | */ |
| 2087 | if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2) |
| 2088 | __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags); |
| 2089 | |
| 2090 | /* |
| 2091 | * Detect if this device has an hardware controlled radio. |
| 2092 | */ |
| 2093 | if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) |
Ivo van Doorn | 066cb63 | 2007-09-25 20:55:39 +0200 | [diff] [blame] | 2094 | __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 2095 | |
| 2096 | /* |
| 2097 | * Read frequency offset and RF programming sequence. |
| 2098 | */ |
| 2099 | rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); |
| 2100 | if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ)) |
| 2101 | __set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags); |
| 2102 | |
| 2103 | rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); |
| 2104 | |
| 2105 | /* |
| 2106 | * Read external LNA informations. |
| 2107 | */ |
| 2108 | rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); |
| 2109 | |
| 2110 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) |
| 2111 | __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); |
| 2112 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) |
| 2113 | __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); |
| 2114 | |
| 2115 | /* |
| 2116 | * Store led settings, for correct led behaviour. |
| 2117 | * If the eeprom value is invalid, |
| 2118 | * switch to default led mode. |
| 2119 | */ |
| 2120 | rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); |
| 2121 | |
| 2122 | rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); |
| 2123 | |
| 2124 | rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE, |
| 2125 | rt2x00dev->led_mode); |
| 2126 | rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0, |
| 2127 | rt2x00_get_field16(eeprom, |
| 2128 | EEPROM_LED_POLARITY_GPIO_0)); |
| 2129 | rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1, |
| 2130 | rt2x00_get_field16(eeprom, |
| 2131 | EEPROM_LED_POLARITY_GPIO_1)); |
| 2132 | rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2, |
| 2133 | rt2x00_get_field16(eeprom, |
| 2134 | EEPROM_LED_POLARITY_GPIO_2)); |
| 2135 | rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3, |
| 2136 | rt2x00_get_field16(eeprom, |
| 2137 | EEPROM_LED_POLARITY_GPIO_3)); |
| 2138 | rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4, |
| 2139 | rt2x00_get_field16(eeprom, |
| 2140 | EEPROM_LED_POLARITY_GPIO_4)); |
| 2141 | rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT, |
| 2142 | rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); |
| 2143 | rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG, |
| 2144 | rt2x00_get_field16(eeprom, |
| 2145 | EEPROM_LED_POLARITY_RDY_G)); |
| 2146 | rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A, |
| 2147 | rt2x00_get_field16(eeprom, |
| 2148 | EEPROM_LED_POLARITY_RDY_A)); |
| 2149 | |
| 2150 | return 0; |
| 2151 | } |
| 2152 | |
| 2153 | /* |
| 2154 | * RF value list for RF5225 & RF5325 |
| 2155 | * Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled |
| 2156 | */ |
| 2157 | static const struct rf_channel rf_vals_noseq[] = { |
| 2158 | { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, |
| 2159 | { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, |
| 2160 | { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, |
| 2161 | { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, |
| 2162 | { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, |
| 2163 | { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, |
| 2164 | { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, |
| 2165 | { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, |
| 2166 | { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, |
| 2167 | { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, |
| 2168 | { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, |
| 2169 | { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, |
| 2170 | { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, |
| 2171 | { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, |
| 2172 | |
| 2173 | /* 802.11 UNI / HyperLan 2 */ |
| 2174 | { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 }, |
| 2175 | { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 }, |
| 2176 | { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b }, |
| 2177 | { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 }, |
| 2178 | { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b }, |
| 2179 | { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 }, |
| 2180 | { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 }, |
| 2181 | { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b }, |
| 2182 | |
| 2183 | /* 802.11 HyperLan 2 */ |
| 2184 | { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 }, |
| 2185 | { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b }, |
| 2186 | { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 }, |
| 2187 | { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b }, |
| 2188 | { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 }, |
| 2189 | { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 }, |
| 2190 | { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b }, |
| 2191 | { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 }, |
| 2192 | { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b }, |
| 2193 | { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 }, |
| 2194 | |
| 2195 | /* 802.11 UNII */ |
| 2196 | { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 }, |
| 2197 | { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f }, |
| 2198 | { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 }, |
| 2199 | { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 }, |
| 2200 | { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f }, |
| 2201 | { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 }, |
| 2202 | |
| 2203 | /* MMAC(Japan)J52 ch 34,38,42,46 */ |
| 2204 | { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b }, |
| 2205 | { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 }, |
| 2206 | { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b }, |
| 2207 | { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 }, |
| 2208 | }; |
| 2209 | |
| 2210 | /* |
| 2211 | * RF value list for RF5225 & RF5325 |
| 2212 | * Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled |
| 2213 | */ |
| 2214 | static const struct rf_channel rf_vals_seq[] = { |
| 2215 | { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, |
| 2216 | { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, |
| 2217 | { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, |
| 2218 | { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, |
| 2219 | { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, |
| 2220 | { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, |
| 2221 | { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, |
| 2222 | { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, |
| 2223 | { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, |
| 2224 | { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, |
| 2225 | { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, |
| 2226 | { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, |
| 2227 | { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, |
| 2228 | { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, |
| 2229 | |
| 2230 | /* 802.11 UNI / HyperLan 2 */ |
| 2231 | { 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 }, |
| 2232 | { 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 }, |
| 2233 | { 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b }, |
| 2234 | { 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b }, |
| 2235 | { 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 }, |
| 2236 | { 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 }, |
| 2237 | { 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 }, |
| 2238 | { 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b }, |
| 2239 | |
| 2240 | /* 802.11 HyperLan 2 */ |
| 2241 | { 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 }, |
| 2242 | { 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 }, |
| 2243 | { 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 }, |
| 2244 | { 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 }, |
| 2245 | { 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 }, |
| 2246 | { 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 }, |
| 2247 | { 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b }, |
| 2248 | { 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b }, |
| 2249 | { 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 }, |
| 2250 | { 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 }, |
| 2251 | |
| 2252 | /* 802.11 UNII */ |
| 2253 | { 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 }, |
| 2254 | { 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b }, |
| 2255 | { 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b }, |
| 2256 | { 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 }, |
| 2257 | { 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 }, |
| 2258 | { 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 }, |
| 2259 | |
| 2260 | /* MMAC(Japan)J52 ch 34,38,42,46 */ |
| 2261 | { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b }, |
| 2262 | { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 }, |
| 2263 | { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b }, |
| 2264 | { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 }, |
| 2265 | }; |
| 2266 | |
| 2267 | static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) |
| 2268 | { |
| 2269 | struct hw_mode_spec *spec = &rt2x00dev->spec; |
| 2270 | u8 *txpower; |
| 2271 | unsigned int i; |
| 2272 | |
| 2273 | /* |
| 2274 | * Initialize all hw fields. |
| 2275 | */ |
| 2276 | rt2x00dev->hw->flags = |
| 2277 | IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2278 | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 2279 | rt2x00dev->hw->extra_tx_headroom = 0; |
| 2280 | rt2x00dev->hw->max_signal = MAX_SIGNAL; |
| 2281 | rt2x00dev->hw->max_rssi = MAX_RX_SSI; |
| 2282 | rt2x00dev->hw->queues = 5; |
| 2283 | |
| 2284 | SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); |
| 2285 | SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, |
| 2286 | rt2x00_eeprom_addr(rt2x00dev, |
| 2287 | EEPROM_MAC_ADDR_0)); |
| 2288 | |
| 2289 | /* |
| 2290 | * Convert tx_power array in eeprom. |
| 2291 | */ |
| 2292 | txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); |
| 2293 | for (i = 0; i < 14; i++) |
| 2294 | txpower[i] = TXPOWER_FROM_DEV(txpower[i]); |
| 2295 | |
| 2296 | /* |
| 2297 | * Initialize hw_mode information. |
| 2298 | */ |
| 2299 | spec->num_modes = 2; |
| 2300 | spec->num_rates = 12; |
| 2301 | spec->tx_power_a = NULL; |
| 2302 | spec->tx_power_bg = txpower; |
| 2303 | spec->tx_power_default = DEFAULT_TXPOWER; |
| 2304 | |
| 2305 | if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) { |
| 2306 | spec->num_channels = 14; |
| 2307 | spec->channels = rf_vals_noseq; |
| 2308 | } else { |
| 2309 | spec->num_channels = 14; |
| 2310 | spec->channels = rf_vals_seq; |
| 2311 | } |
| 2312 | |
| 2313 | if (rt2x00_rf(&rt2x00dev->chip, RF5225) || |
| 2314 | rt2x00_rf(&rt2x00dev->chip, RF5325)) { |
| 2315 | spec->num_modes = 3; |
| 2316 | spec->num_channels = ARRAY_SIZE(rf_vals_seq); |
| 2317 | |
| 2318 | txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); |
| 2319 | for (i = 0; i < 14; i++) |
| 2320 | txpower[i] = TXPOWER_FROM_DEV(txpower[i]); |
| 2321 | |
| 2322 | spec->tx_power_a = txpower; |
| 2323 | } |
| 2324 | } |
| 2325 | |
| 2326 | static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) |
| 2327 | { |
| 2328 | int retval; |
| 2329 | |
| 2330 | /* |
| 2331 | * Allocate eeprom data. |
| 2332 | */ |
| 2333 | retval = rt61pci_validate_eeprom(rt2x00dev); |
| 2334 | if (retval) |
| 2335 | return retval; |
| 2336 | |
| 2337 | retval = rt61pci_init_eeprom(rt2x00dev); |
| 2338 | if (retval) |
| 2339 | return retval; |
| 2340 | |
| 2341 | /* |
| 2342 | * Initialize hw specifications. |
| 2343 | */ |
| 2344 | rt61pci_probe_hw_mode(rt2x00dev); |
| 2345 | |
| 2346 | /* |
| 2347 | * This device requires firmware |
| 2348 | */ |
Ivo van Doorn | 066cb63 | 2007-09-25 20:55:39 +0200 | [diff] [blame] | 2349 | __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 2350 | |
| 2351 | /* |
| 2352 | * Set the rssi offset. |
| 2353 | */ |
| 2354 | rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; |
| 2355 | |
| 2356 | return 0; |
| 2357 | } |
| 2358 | |
| 2359 | /* |
| 2360 | * IEEE80211 stack callback functions. |
| 2361 | */ |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2362 | static void rt61pci_configure_filter(struct ieee80211_hw *hw, |
| 2363 | unsigned int changed_flags, |
| 2364 | unsigned int *total_flags, |
| 2365 | int mc_count, |
| 2366 | struct dev_addr_list *mc_list) |
| 2367 | { |
| 2368 | struct rt2x00_dev *rt2x00dev = hw->priv; |
| 2369 | struct interface *intf = &rt2x00dev->interface; |
| 2370 | u32 reg; |
| 2371 | |
| 2372 | /* |
| 2373 | * Mask off any flags we are going to ignore from |
| 2374 | * the total_flags field. |
| 2375 | */ |
| 2376 | *total_flags &= |
| 2377 | FIF_ALLMULTI | |
| 2378 | FIF_FCSFAIL | |
| 2379 | FIF_PLCPFAIL | |
| 2380 | FIF_CONTROL | |
| 2381 | FIF_OTHER_BSS | |
| 2382 | FIF_PROMISC_IN_BSS; |
| 2383 | |
| 2384 | /* |
| 2385 | * Apply some rules to the filters: |
| 2386 | * - Some filters imply different filters to be set. |
| 2387 | * - Some things we can't filter out at all. |
| 2388 | * - Some filters are set based on interface type. |
| 2389 | */ |
| 2390 | if (mc_count) |
| 2391 | *total_flags |= FIF_ALLMULTI; |
Ivo van Doorn | 5886d0d | 2007-10-06 14:13:38 +0200 | [diff] [blame^] | 2392 | if (*total_flags & FIF_OTHER_BSS || |
| 2393 | *total_flags & FIF_PROMISC_IN_BSS) |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2394 | *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; |
| 2395 | if (is_interface_type(intf, IEEE80211_IF_TYPE_AP)) |
| 2396 | *total_flags |= FIF_PROMISC_IN_BSS; |
| 2397 | |
| 2398 | /* |
| 2399 | * Check if there is any work left for us. |
| 2400 | */ |
| 2401 | if (intf->filter == *total_flags) |
| 2402 | return; |
| 2403 | intf->filter = *total_flags; |
| 2404 | |
| 2405 | /* |
| 2406 | * Start configuration steps. |
| 2407 | * Note that the version error will always be dropped |
| 2408 | * and broadcast frames will always be accepted since |
| 2409 | * there is no filter for it at this time. |
| 2410 | */ |
| 2411 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); |
| 2412 | rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, |
| 2413 | !(*total_flags & FIF_FCSFAIL)); |
| 2414 | rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, |
| 2415 | !(*total_flags & FIF_PLCPFAIL)); |
| 2416 | rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, |
| 2417 | !(*total_flags & FIF_CONTROL)); |
| 2418 | rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, |
| 2419 | !(*total_flags & FIF_PROMISC_IN_BSS)); |
| 2420 | rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, |
| 2421 | !(*total_flags & FIF_PROMISC_IN_BSS)); |
| 2422 | rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); |
| 2423 | rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, |
| 2424 | !(*total_flags & FIF_ALLMULTI)); |
| 2425 | rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, 0); |
| 2426 | rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1); |
| 2427 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); |
| 2428 | } |
| 2429 | |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 2430 | static int rt61pci_set_retry_limit(struct ieee80211_hw *hw, |
| 2431 | u32 short_retry, u32 long_retry) |
| 2432 | { |
| 2433 | struct rt2x00_dev *rt2x00dev = hw->priv; |
| 2434 | u32 reg; |
| 2435 | |
| 2436 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); |
| 2437 | rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry); |
| 2438 | rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry); |
| 2439 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); |
| 2440 | |
| 2441 | return 0; |
| 2442 | } |
| 2443 | |
| 2444 | static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) |
| 2445 | { |
| 2446 | struct rt2x00_dev *rt2x00dev = hw->priv; |
| 2447 | u64 tsf; |
| 2448 | u32 reg; |
| 2449 | |
| 2450 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, ®); |
| 2451 | tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; |
| 2452 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, ®); |
| 2453 | tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); |
| 2454 | |
| 2455 | return tsf; |
| 2456 | } |
| 2457 | |
| 2458 | static void rt61pci_reset_tsf(struct ieee80211_hw *hw) |
| 2459 | { |
| 2460 | struct rt2x00_dev *rt2x00dev = hw->priv; |
| 2461 | |
| 2462 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0); |
| 2463 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0); |
| 2464 | } |
| 2465 | |
Ivo van Doorn | 2484591 | 2007-09-25 20:53:43 +0200 | [diff] [blame] | 2466 | static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 2467 | struct ieee80211_tx_control *control) |
| 2468 | { |
| 2469 | struct rt2x00_dev *rt2x00dev = hw->priv; |
| 2470 | |
| 2471 | /* |
| 2472 | * Just in case the ieee80211 doesn't set this, |
| 2473 | * but we need this queue set for the descriptor |
| 2474 | * initialization. |
| 2475 | */ |
| 2476 | control->queue = IEEE80211_TX_QUEUE_BEACON; |
| 2477 | |
| 2478 | /* |
| 2479 | * We need to append the descriptor in front of the |
| 2480 | * beacon frame. |
| 2481 | */ |
| 2482 | if (skb_headroom(skb) < TXD_DESC_SIZE) { |
| 2483 | if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) { |
| 2484 | dev_kfree_skb(skb); |
| 2485 | return -ENOMEM; |
| 2486 | } |
| 2487 | } |
| 2488 | |
| 2489 | /* |
| 2490 | * First we create the beacon. |
| 2491 | */ |
| 2492 | skb_push(skb, TXD_DESC_SIZE); |
| 2493 | rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, |
| 2494 | (struct ieee80211_hdr *)(skb->data + |
| 2495 | TXD_DESC_SIZE), |
| 2496 | skb->len - TXD_DESC_SIZE, control); |
| 2497 | |
| 2498 | /* |
| 2499 | * Write entire beacon with descriptor to register, |
| 2500 | * and kick the beacon generator. |
| 2501 | */ |
| 2502 | rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0, skb->data, skb->len); |
| 2503 | rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); |
| 2504 | |
| 2505 | return 0; |
| 2506 | } |
| 2507 | |
| 2508 | static const struct ieee80211_ops rt61pci_mac80211_ops = { |
| 2509 | .tx = rt2x00mac_tx, |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2510 | .start = rt2x00mac_start, |
| 2511 | .stop = rt2x00mac_stop, |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 2512 | .add_interface = rt2x00mac_add_interface, |
| 2513 | .remove_interface = rt2x00mac_remove_interface, |
| 2514 | .config = rt2x00mac_config, |
| 2515 | .config_interface = rt2x00mac_config_interface, |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2516 | .configure_filter = rt61pci_configure_filter, |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 2517 | .get_stats = rt2x00mac_get_stats, |
| 2518 | .set_retry_limit = rt61pci_set_retry_limit, |
| 2519 | .conf_tx = rt2x00mac_conf_tx, |
| 2520 | .get_tx_stats = rt2x00mac_get_tx_stats, |
| 2521 | .get_tsf = rt61pci_get_tsf, |
| 2522 | .reset_tsf = rt61pci_reset_tsf, |
| 2523 | .beacon_update = rt61pci_beacon_update, |
| 2524 | }; |
| 2525 | |
| 2526 | static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { |
| 2527 | .irq_handler = rt61pci_interrupt, |
| 2528 | .probe_hw = rt61pci_probe_hw, |
| 2529 | .get_firmware_name = rt61pci_get_firmware_name, |
| 2530 | .load_firmware = rt61pci_load_firmware, |
| 2531 | .initialize = rt2x00pci_initialize, |
| 2532 | .uninitialize = rt2x00pci_uninitialize, |
| 2533 | .set_device_state = rt61pci_set_device_state, |
| 2534 | #ifdef CONFIG_RT61PCI_RFKILL |
| 2535 | .rfkill_poll = rt61pci_rfkill_poll, |
| 2536 | #endif /* CONFIG_RT61PCI_RFKILL */ |
| 2537 | .link_stats = rt61pci_link_stats, |
| 2538 | .reset_tuner = rt61pci_reset_tuner, |
| 2539 | .link_tuner = rt61pci_link_tuner, |
| 2540 | .write_tx_desc = rt61pci_write_tx_desc, |
| 2541 | .write_tx_data = rt2x00pci_write_tx_data, |
| 2542 | .kick_tx_queue = rt61pci_kick_tx_queue, |
| 2543 | .fill_rxdone = rt61pci_fill_rxdone, |
| 2544 | .config_mac_addr = rt61pci_config_mac_addr, |
| 2545 | .config_bssid = rt61pci_config_bssid, |
Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 2546 | .config_type = rt61pci_config_type, |
| 2547 | .config = rt61pci_config, |
| 2548 | }; |
| 2549 | |
| 2550 | static const struct rt2x00_ops rt61pci_ops = { |
| 2551 | .name = DRV_NAME, |
| 2552 | .rxd_size = RXD_DESC_SIZE, |
| 2553 | .txd_size = TXD_DESC_SIZE, |
| 2554 | .eeprom_size = EEPROM_SIZE, |
| 2555 | .rf_size = RF_SIZE, |
| 2556 | .lib = &rt61pci_rt2x00_ops, |
| 2557 | .hw = &rt61pci_mac80211_ops, |
| 2558 | #ifdef CONFIG_RT2X00_LIB_DEBUGFS |
| 2559 | .debugfs = &rt61pci_rt2x00debug, |
| 2560 | #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ |
| 2561 | }; |
| 2562 | |
| 2563 | /* |
| 2564 | * RT61pci module information. |
| 2565 | */ |
| 2566 | static struct pci_device_id rt61pci_device_table[] = { |
| 2567 | /* RT2561s */ |
| 2568 | { PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) }, |
| 2569 | /* RT2561 v2 */ |
| 2570 | { PCI_DEVICE(0x1814, 0x0302), PCI_DEVICE_DATA(&rt61pci_ops) }, |
| 2571 | /* RT2661 */ |
| 2572 | { PCI_DEVICE(0x1814, 0x0401), PCI_DEVICE_DATA(&rt61pci_ops) }, |
| 2573 | { 0, } |
| 2574 | }; |
| 2575 | |
| 2576 | MODULE_AUTHOR(DRV_PROJECT); |
| 2577 | MODULE_VERSION(DRV_VERSION); |
| 2578 | MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver."); |
| 2579 | MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 " |
| 2580 | "PCI & PCMCIA chipset based cards"); |
| 2581 | MODULE_DEVICE_TABLE(pci, rt61pci_device_table); |
| 2582 | MODULE_FIRMWARE(FIRMWARE_RT2561); |
| 2583 | MODULE_FIRMWARE(FIRMWARE_RT2561s); |
| 2584 | MODULE_FIRMWARE(FIRMWARE_RT2661); |
| 2585 | MODULE_LICENSE("GPL"); |
| 2586 | |
| 2587 | static struct pci_driver rt61pci_driver = { |
| 2588 | .name = DRV_NAME, |
| 2589 | .id_table = rt61pci_device_table, |
| 2590 | .probe = rt2x00pci_probe, |
| 2591 | .remove = __devexit_p(rt2x00pci_remove), |
| 2592 | .suspend = rt2x00pci_suspend, |
| 2593 | .resume = rt2x00pci_resume, |
| 2594 | }; |
| 2595 | |
| 2596 | static int __init rt61pci_init(void) |
| 2597 | { |
| 2598 | return pci_register_driver(&rt61pci_driver); |
| 2599 | } |
| 2600 | |
| 2601 | static void __exit rt61pci_exit(void) |
| 2602 | { |
| 2603 | pci_unregister_driver(&rt61pci_driver); |
| 2604 | } |
| 2605 | |
| 2606 | module_init(rt61pci_init); |
| 2607 | module_exit(rt61pci_exit); |