blob: 74fc5401f407cbe06bfa1ee99c48b627c1072e25 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002 * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
3 * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
4 *
5 * CYPRESS CY82C693 chipset IDE controller
6 *
7 * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
8 * Writing the driver was quite simple, since most of the job is
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +02009 * done by the generic pci-ide support.
Linus Torvalds1da177e2005-04-16 15:20:36 -070010 * The hard part was finding the CY82C693's datasheet on Cypress's
11 * web page :-(. But Altavista solved this problem :-).
12 *
13 *
14 * Notes:
15 * - I recently got a 16.8G IBM DTTA, so I was able to test it with
16 * a large and fast disk - the results look great, so I'd say the
17 * driver is working fine :-)
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +020018 * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA
19 * - this is my first linux driver, so there's probably a lot of room
Linus Torvalds1da177e2005-04-16 15:20:36 -070020 * for optimizations and bug fixing, so feel free to do it.
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +020021 * - if using PIO mode it's a good idea to set the PIO mode and
Linus Torvalds1da177e2005-04-16 15:20:36 -070022 * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda
23 * - I had some problems with my IBM DHEA with PIO modes < 2
24 * (lost interrupts) ?????
25 * - first tests with DMA look okay, they seem to work, but there is a
26 * problem with sound - the BusMaster IDE TimeOut should fixed this
27 *
28 * Ancient History:
29 * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693
30 * ASK@1999-01-23: v0.33 made a few minor code clean ups
31 * removed DMA clock speed setting by default
32 * added boot message
33 * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut
34 * added support to set DMA Controller Clock Speed
35 * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes
36 * on some drives.
37 * ASK@1998-10-29: v0.3 added support to set DMA modes
38 * ASK@1998-10-28: v0.2 added support to set PIO modes
39 * ASK@1998-10-27: v0.1 first version - chipset detection
40 *
41 */
42
Linus Torvalds1da177e2005-04-16 15:20:36 -070043#include <linux/module.h>
44#include <linux/types.h>
45#include <linux/pci.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070046#include <linux/ide.h>
47#include <linux/init.h>
48
49#include <asm/io.h>
50
Bartlomiej Zolnierkiewiczced3ec82008-07-24 22:53:32 +020051#define DRV_NAME "cy82c693"
52
Linus Torvalds1da177e2005-04-16 15:20:36 -070053/*
54 * The following are used to debug the driver.
55 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070056#define CY82C693_DEBUG_INFO 0
57
Linus Torvalds1da177e2005-04-16 15:20:36 -070058/*
59 * NOTE: the value for busmaster timeout is tricky and I got it by
60 * trial and error! By using a to low value will cause DMA timeouts
61 * and drop IDE performance, and by using a to high value will cause
62 * audio playback to scatter.
63 * If you know a better value or how to calc it, please let me know.
64 */
65
66/* twice the value written in cy82c693ub datasheet */
67#define BUSMASTER_TIMEOUT 0x50
68/*
69 * the value above was tested on my machine and it seems to work okay
70 */
71
72/* here are the offset definitions for the registers */
73#define CY82_IDE_CMDREG 0x04
74#define CY82_IDE_ADDRSETUP 0x48
75#define CY82_IDE_MASTER_IOR 0x4C
76#define CY82_IDE_MASTER_IOW 0x4D
77#define CY82_IDE_SLAVE_IOR 0x4E
78#define CY82_IDE_SLAVE_IOW 0x4F
79#define CY82_IDE_MASTER_8BIT 0x50
80#define CY82_IDE_SLAVE_8BIT 0x51
81
82#define CY82_INDEX_PORT 0x22
83#define CY82_DATA_PORT 0x23
84
Linus Torvalds1da177e2005-04-16 15:20:36 -070085#define CY82_INDEX_CHANNEL0 0x30
86#define CY82_INDEX_CHANNEL1 0x31
87#define CY82_INDEX_TIMEOUT 0x32
88
Linus Torvalds1da177e2005-04-16 15:20:36 -070089/* the min and max PCI bus speed in MHz - from datasheet */
90#define CY82C963_MIN_BUS_SPEED 25
91#define CY82C963_MAX_BUS_SPEED 33
92
93/* the struct for the PIO mode timings */
94typedef struct pio_clocks_s {
95 u8 address_time; /* Address setup (clocks) */
96 u8 time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */
97 u8 time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */
98 u8 time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */
99} pio_clocks_t;
100
101/*
102 * calc clocks using bus_speed
103 * returns (rounded up) time in bus clocks for time in ns
104 */
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200105static int calc_clk(int time, int bus_speed)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700106{
107 int clocks;
108
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200109 clocks = (time*bus_speed+999)/1000 - 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700110
111 if (clocks < 0)
112 clocks = 0;
113
114 if (clocks > 0x0F)
115 clocks = 0x0F;
116
117 return clocks;
118}
119
120/*
121 * compute the values for the clock registers for PIO
122 * mode and pci_clk [MHz] speed
123 *
124 * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used
125 * for mode 3 and 4 drives 8 and 16-bit timings are the same
126 *
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200127 */
128static void compute_clocks(u8 pio, pio_clocks_t *p_pclk)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700129{
Bartlomiej Zolnierkiewicz713a5902008-07-16 20:33:38 +0200130 struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700131 int clk1, clk2;
Bartlomiej Zolnierkiewicz30e5ee42008-07-15 21:21:46 +0200132 int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133
134 /* we don't check against CY82C693's min and max speed,
135 * so you can play with the idebus=xx parameter
136 */
137
Linus Torvalds1da177e2005-04-16 15:20:36 -0700138 /* let's calc the address setup time clocks */
Bartlomiej Zolnierkiewicz713a5902008-07-16 20:33:38 +0200139 p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700140
141 /* let's calc the active and recovery time clocks */
Bartlomiej Zolnierkiewicz713a5902008-07-16 20:33:38 +0200142 clk1 = calc_clk(t->active, bus_speed);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143
144 /* calc recovery timing */
Bartlomiej Zolnierkiewicz713a5902008-07-16 20:33:38 +0200145 clk2 = t->cycle - t->active - t->setup;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700146
147 clk2 = calc_clk(clk2, bus_speed);
148
149 clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */
150
151 /* note: we use the same values for 16bit IOR and IOW
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200152 * those are all the same, since I don't have other
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153 * timings than those from ide-lib.c
154 */
155
156 p_pclk->time_16r = (u8)clk1;
157 p_pclk->time_16w = (u8)clk1;
158
159 /* what are good values for 8bit ?? */
160 p_pclk->time_8 = (u8)clk1;
161}
162
163/*
164 * set DMA mode a specific channel for CY82C693
165 */
166
Bartlomiej Zolnierkiewicz8704de82008-01-26 20:13:00 +0100167static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700168{
Bartlomiej Zolnierkiewicz8704de82008-01-26 20:13:00 +0100169 ide_hwif_t *hwif = drive->hwif;
170 u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700171
Bartlomiej Zolnierkiewicz8704de82008-01-26 20:13:00 +0100172 index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700173
Bartlomiej Zolnierkiewicz8704de82008-01-26 20:13:00 +0100174 data = (mode & 3) | (single << 2);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175
Bartlomiej Zolnierkiewicz0ecdca22007-02-17 02:40:25 +0100176 outb(index, CY82_INDEX_PORT);
177 outb(data, CY82_DATA_PORT);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700178
179#if CY82C693_DEBUG_INFO
180 printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
Bartlomiej Zolnierkiewicz123995b2008-10-13 21:39:40 +0200181 drive->name, hwif->channel, drive->dn & 1, mode & 3, single);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700182#endif /* CY82C693_DEBUG_INFO */
183
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200184 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700185 * note: below we set the value for Bus Master IDE TimeOut Register
186 * I'm not absolutly sure what this does, but it solved my problem
187 * with IDE DMA and sound, so I now can play sound and work with
188 * my IDE driver at the same time :-)
189 *
190 * If you know the correct (best) value for this register please
191 * let me know - ASK
192 */
193
194 data = BUSMASTER_TIMEOUT;
Bartlomiej Zolnierkiewicz0ecdca22007-02-17 02:40:25 +0100195 outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
196 outb(data, CY82_DATA_PORT);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700197
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200198#if CY82C693_DEBUG_INFO
199 printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200 drive->name, data);
201#endif /* CY82C693_DEBUG_INFO */
202}
203
Bartlomiej Zolnierkiewicz26bcb872007-10-11 23:54:00 +0200204static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205{
Bartlomiej Zolnierkiewicz898ec222009-01-06 17:20:52 +0100206 ide_hwif_t *hwif = drive->hwif;
Bartlomiej Zolnierkiewicz36501652008-02-01 23:09:31 +0100207 struct pci_dev *dev = to_pci_dev(hwif->dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208 pio_clocks_t pclk;
209 unsigned int addrCtrl;
210
211 /* select primary or secondary channel */
212 if (hwif->index > 0) { /* drive is on the secondary channel */
Alan Cox652aa162006-10-03 01:14:35 -0700213 dev = pci_get_slot(dev->bus, dev->devfn+1);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700214 if (!dev) {
215 printk(KERN_ERR "%s: tune_drive: "
216 "Cannot find secondary interface!\n",
217 drive->name);
218 return;
219 }
220 }
221
Linus Torvalds1da177e2005-04-16 15:20:36 -0700222 /* let's calc the values for this PIO mode */
223 compute_clocks(pio, &pclk);
224
225 /* now let's write the clocks registers */
Bartlomiej Zolnierkiewicz123995b2008-10-13 21:39:40 +0200226 if ((drive->dn & 1) == 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700227 /*
228 * set master drive
229 * address setup control register
230 * is 32 bit !!!
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200231 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700232 pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200233
Linus Torvalds1da177e2005-04-16 15:20:36 -0700234 addrCtrl &= (~0xF);
235 addrCtrl |= (unsigned int)pclk.address_time;
236 pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
237
238 /* now let's set the remaining registers */
239 pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r);
240 pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w);
241 pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8);
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200242
Linus Torvalds1da177e2005-04-16 15:20:36 -0700243 addrCtrl &= 0xF;
244 } else {
245 /*
246 * set slave drive
247 * address setup control register
248 * is 32 bit !!!
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200249 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700250 pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
251
252 addrCtrl &= (~0xF0);
253 addrCtrl |= ((unsigned int)pclk.address_time<<4);
254 pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
255
256 /* now let's set the remaining registers */
257 pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r);
258 pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w);
259 pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8);
260
261 addrCtrl >>= 4;
262 addrCtrl &= 0xF;
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200263 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264
265#if CY82C693_DEBUG_INFO
266 printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to "
267 "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
Bartlomiej Zolnierkiewicz123995b2008-10-13 21:39:40 +0200268 drive->name, hwif->channel, drive->dn & 1,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269 addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
270#endif /* CY82C693_DEBUG_INFO */
271}
272
Adrian Bunke851b622005-11-09 23:07:56 +0100273static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700274{
Bartlomiej Zolnierkiewiczf32d26a2007-10-26 20:31:15 +0200275 static ide_hwif_t *primary;
Bartlomiej Zolnierkiewicz36501652008-02-01 23:09:31 +0100276 struct pci_dev *dev = to_pci_dev(hwif->dev);
Bartlomiej Zolnierkiewiczf32d26a2007-10-26 20:31:15 +0200277
Bartlomiej Zolnierkiewicz36501652008-02-01 23:09:31 +0100278 if (PCI_FUNC(dev->devfn) == 1)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279 primary = hwif;
280 else {
281 hwif->mate = primary;
282 hwif->channel = 1;
283 }
284}
285
Bartlomiej Zolnierkiewiczac95bee2008-04-26 22:25:14 +0200286static const struct ide_port_ops cy82c693_port_ops = {
287 .set_pio_mode = cy82c693_set_pio_mode,
288 .set_dma_mode = cy82c693_set_dma_mode,
289};
290
Bartlomiej Zolnierkiewicz85620432007-10-20 00:32:34 +0200291static const struct ide_port_info cy82c693_chipset __devinitdata = {
Bartlomiej Zolnierkiewiczced3ec82008-07-24 22:53:32 +0200292 .name = DRV_NAME,
Bartlomiej Zolnierkiewicz7b77d862007-02-17 02:40:24 +0100293 .init_iops = init_iops_cy82c693,
Bartlomiej Zolnierkiewiczac95bee2008-04-26 22:25:14 +0200294 .port_ops = &cy82c693_port_ops,
Bartlomiej Zolnierkiewicz951784b2008-04-26 17:36:38 +0200295 .host_flags = IDE_HFLAG_SINGLE,
Bartlomiej Zolnierkiewicz4099d142007-07-20 01:11:59 +0200296 .pio_mask = ATA_PIO4,
Bartlomiej Zolnierkiewicz8704de82008-01-26 20:13:00 +0100297 .swdma_mask = ATA_SWDMA2,
298 .mwdma_mask = ATA_MWDMA2,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299};
300
301static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id)
302{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303 struct pci_dev *dev2;
304 int ret = -ENODEV;
305
306 /* CY82C693 is more than only a IDE controller.
307 Function 1 is primary IDE channel, function 2 - secondary. */
Paolo Ciarrocchi175f3542008-04-26 17:36:42 +0200308 if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
Linus Torvalds1da177e2005-04-16 15:20:36 -0700309 PCI_FUNC(dev->devfn) == 1) {
Alan Cox652aa162006-10-03 01:14:35 -0700310 dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
Bartlomiej Zolnierkiewicz6cdf6eb2008-07-24 22:53:14 +0200311 ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
Bartlomiej Zolnierkiewiczcd688412008-07-24 22:53:21 +0200312 if (ret)
313 pci_dev_put(dev2);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700314 }
315 return ret;
316}
317
Bartlomiej Zolnierkiewiczcd688412008-07-24 22:53:21 +0200318static void __devexit cy82c693_remove(struct pci_dev *dev)
319{
320 struct ide_host *host = pci_get_drvdata(dev);
321 struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
322
323 ide_pci_remove(dev);
324 pci_dev_put(dev2);
325}
326
Bartlomiej Zolnierkiewicz9cbcc5e2007-10-16 22:29:56 +0200327static const struct pci_device_id cy82c693_pci_tbl[] = {
328 { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700329 { 0, },
330};
331MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
332
Bartlomiej Zolnierkiewicza9ab09e22008-10-13 21:39:41 +0200333static struct pci_driver cy82c693_pci_driver = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700334 .name = "Cypress_IDE",
335 .id_table = cy82c693_pci_tbl,
336 .probe = cy82c693_init_one,
Adrian Bunka69999e2008-08-18 21:40:03 +0200337 .remove = __devexit_p(cy82c693_remove),
Bartlomiej Zolnierkiewiczfeb22b72008-10-10 22:39:32 +0200338 .suspend = ide_pci_suspend,
339 .resume = ide_pci_resume,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700340};
341
Bartlomiej Zolnierkiewicz82ab1ee2007-01-27 13:46:56 +0100342static int __init cy82c693_ide_init(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700343{
Bartlomiej Zolnierkiewicza9ab09e22008-10-13 21:39:41 +0200344 return ide_pci_register_driver(&cy82c693_pci_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345}
346
Bartlomiej Zolnierkiewiczcd688412008-07-24 22:53:21 +0200347static void __exit cy82c693_ide_exit(void)
348{
Bartlomiej Zolnierkiewicza9ab09e22008-10-13 21:39:41 +0200349 pci_unregister_driver(&cy82c693_pci_driver);
Bartlomiej Zolnierkiewiczcd688412008-07-24 22:53:21 +0200350}
351
Linus Torvalds1da177e2005-04-16 15:20:36 -0700352module_init(cy82c693_ide_init);
Bartlomiej Zolnierkiewiczcd688412008-07-24 22:53:21 +0200353module_exit(cy82c693_ide_exit);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700354
355MODULE_AUTHOR("Andreas Krebs, Andre Hedrick");
356MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
357MODULE_LICENSE("GPL");