Bruno Prémont | fabdbf2 | 2012-07-30 21:38:28 +0200 | [diff] [blame] | 1 | /*************************************************************************** |
| 2 | * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * |
| 3 | * * |
| 4 | * Based on Logitech G13 driver (v0.4) * |
| 5 | * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * |
| 6 | * * |
| 7 | * This program is free software: you can redistribute it and/or modify * |
| 8 | * it under the terms of the GNU General Public License as published by * |
| 9 | * the Free Software Foundation, version 2 of the License. * |
| 10 | * * |
| 11 | * This driver is distributed in the hope that it will be useful, but * |
| 12 | * WITHOUT ANY WARRANTY; without even the implied warranty of * |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * |
| 14 | * General Public License for more details. * |
| 15 | * * |
| 16 | * You should have received a copy of the GNU General Public License * |
| 17 | * along with this software. If not see <http://www.gnu.org/licenses/>. * |
| 18 | ***************************************************************************/ |
| 19 | |
| 20 | #include <linux/hid.h> |
| 21 | #include <linux/hid-debug.h> |
| 22 | #include "usbhid/usbhid.h" |
| 23 | #include <linux/usb.h> |
| 24 | |
| 25 | #include <linux/fb.h> |
| 26 | #include <linux/seq_file.h> |
| 27 | #include <linux/debugfs.h> |
| 28 | |
| 29 | #include <linux/module.h> |
Geert Uytterhoeven | 9277738 | 2012-08-21 22:41:23 +0200 | [diff] [blame] | 30 | #include <linux/uaccess.h> |
Bruno Prémont | fabdbf2 | 2012-07-30 21:38:28 +0200 | [diff] [blame] | 31 | |
| 32 | #include "hid-picolcd.h" |
| 33 | |
| 34 | |
| 35 | static int picolcd_debug_reset_show(struct seq_file *f, void *p) |
| 36 | { |
| 37 | if (picolcd_fbinfo((struct picolcd_data *)f->private)) |
| 38 | seq_printf(f, "all fb\n"); |
| 39 | else |
| 40 | seq_printf(f, "all\n"); |
| 41 | return 0; |
| 42 | } |
| 43 | |
| 44 | static int picolcd_debug_reset_open(struct inode *inode, struct file *f) |
| 45 | { |
| 46 | return single_open(f, picolcd_debug_reset_show, inode->i_private); |
| 47 | } |
| 48 | |
| 49 | static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf, |
| 50 | size_t count, loff_t *ppos) |
| 51 | { |
| 52 | struct picolcd_data *data = ((struct seq_file *)f->private_data)->private; |
| 53 | char buf[32]; |
| 54 | size_t cnt = min(count, sizeof(buf)-1); |
| 55 | if (copy_from_user(buf, user_buf, cnt)) |
| 56 | return -EFAULT; |
| 57 | |
| 58 | while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n')) |
| 59 | cnt--; |
| 60 | buf[cnt] = '\0'; |
| 61 | if (strcmp(buf, "all") == 0) { |
| 62 | picolcd_reset(data->hdev); |
| 63 | picolcd_fb_reset(data, 1); |
| 64 | } else if (strcmp(buf, "fb") == 0) { |
| 65 | picolcd_fb_reset(data, 1); |
| 66 | } else { |
| 67 | return -EINVAL; |
| 68 | } |
| 69 | return count; |
| 70 | } |
| 71 | |
| 72 | static const struct file_operations picolcd_debug_reset_fops = { |
| 73 | .owner = THIS_MODULE, |
| 74 | .open = picolcd_debug_reset_open, |
| 75 | .read = seq_read, |
| 76 | .llseek = seq_lseek, |
| 77 | .write = picolcd_debug_reset_write, |
| 78 | .release = single_release, |
| 79 | }; |
| 80 | |
| 81 | /* |
| 82 | * The "eeprom" file |
| 83 | */ |
| 84 | static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u, |
| 85 | size_t s, loff_t *off) |
| 86 | { |
| 87 | struct picolcd_data *data = f->private_data; |
| 88 | struct picolcd_pending *resp; |
| 89 | u8 raw_data[3]; |
| 90 | ssize_t ret = -EIO; |
| 91 | |
| 92 | if (s == 0) |
| 93 | return -EINVAL; |
| 94 | if (*off > 0x0ff) |
| 95 | return 0; |
| 96 | |
| 97 | /* prepare buffer with info about what we want to read (addr & len) */ |
| 98 | raw_data[0] = *off & 0xff; |
| 99 | raw_data[1] = (*off >> 8) & 0xff; |
| 100 | raw_data[2] = s < 20 ? s : 20; |
| 101 | if (*off + raw_data[2] > 0xff) |
| 102 | raw_data[2] = 0x100 - *off; |
| 103 | resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data, |
| 104 | sizeof(raw_data)); |
| 105 | if (!resp) |
| 106 | return -EIO; |
| 107 | |
| 108 | if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { |
| 109 | /* successful read :) */ |
| 110 | ret = resp->raw_data[2]; |
| 111 | if (ret > s) |
| 112 | ret = s; |
| 113 | if (copy_to_user(u, resp->raw_data+3, ret)) |
| 114 | ret = -EFAULT; |
| 115 | else |
| 116 | *off += ret; |
| 117 | } /* anything else is some kind of IO error */ |
| 118 | |
| 119 | kfree(resp); |
| 120 | return ret; |
| 121 | } |
| 122 | |
| 123 | static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u, |
| 124 | size_t s, loff_t *off) |
| 125 | { |
| 126 | struct picolcd_data *data = f->private_data; |
| 127 | struct picolcd_pending *resp; |
| 128 | ssize_t ret = -EIO; |
| 129 | u8 raw_data[23]; |
| 130 | |
| 131 | if (s == 0) |
| 132 | return -EINVAL; |
| 133 | if (*off > 0x0ff) |
| 134 | return -ENOSPC; |
| 135 | |
| 136 | memset(raw_data, 0, sizeof(raw_data)); |
| 137 | raw_data[0] = *off & 0xff; |
| 138 | raw_data[1] = (*off >> 8) & 0xff; |
Bruno Prémont | baacf9c | 2012-07-30 21:38:54 +0200 | [diff] [blame] | 139 | raw_data[2] = min_t(size_t, 20, s); |
Bruno Prémont | fabdbf2 | 2012-07-30 21:38:28 +0200 | [diff] [blame] | 140 | if (*off + raw_data[2] > 0xff) |
| 141 | raw_data[2] = 0x100 - *off; |
| 142 | |
| 143 | if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2]))) |
| 144 | return -EFAULT; |
| 145 | resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data, |
| 146 | sizeof(raw_data)); |
| 147 | |
| 148 | if (!resp) |
| 149 | return -EIO; |
| 150 | |
| 151 | if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { |
| 152 | /* check if written data matches */ |
| 153 | if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) { |
| 154 | *off += raw_data[2]; |
| 155 | ret = raw_data[2]; |
| 156 | } |
| 157 | } |
| 158 | kfree(resp); |
| 159 | return ret; |
| 160 | } |
| 161 | |
| 162 | /* |
| 163 | * Notes: |
| 164 | * - read/write happens in chunks of at most 20 bytes, it's up to userspace |
| 165 | * to loop in order to get more data. |
| 166 | * - on write errors on otherwise correct write request the bytes |
| 167 | * that should have been written are in undefined state. |
| 168 | */ |
| 169 | static const struct file_operations picolcd_debug_eeprom_fops = { |
| 170 | .owner = THIS_MODULE, |
| 171 | .open = simple_open, |
| 172 | .read = picolcd_debug_eeprom_read, |
| 173 | .write = picolcd_debug_eeprom_write, |
| 174 | .llseek = generic_file_llseek, |
| 175 | }; |
| 176 | |
| 177 | /* |
| 178 | * The "flash" file |
| 179 | */ |
| 180 | /* record a flash address to buf (bounds check to be done by caller) */ |
| 181 | static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off) |
| 182 | { |
| 183 | buf[0] = off & 0xff; |
| 184 | buf[1] = (off >> 8) & 0xff; |
| 185 | if (data->addr_sz == 3) |
| 186 | buf[2] = (off >> 16) & 0xff; |
| 187 | return data->addr_sz == 2 ? 2 : 3; |
| 188 | } |
| 189 | |
| 190 | /* read a given size of data (bounds check to be done by caller) */ |
| 191 | static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id, |
| 192 | char __user *u, size_t s, loff_t *off) |
| 193 | { |
| 194 | struct picolcd_pending *resp; |
| 195 | u8 raw_data[4]; |
| 196 | ssize_t ret = 0; |
| 197 | int len_off, err = -EIO; |
| 198 | |
| 199 | while (s > 0) { |
| 200 | err = -EIO; |
| 201 | len_off = _picolcd_flash_setaddr(data, raw_data, *off); |
| 202 | raw_data[len_off] = s > 32 ? 32 : s; |
| 203 | resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1); |
| 204 | if (!resp || !resp->in_report) |
| 205 | goto skip; |
| 206 | if (resp->in_report->id == REPORT_MEMORY || |
| 207 | resp->in_report->id == REPORT_BL_READ_MEMORY) { |
| 208 | if (memcmp(raw_data, resp->raw_data, len_off+1) != 0) |
| 209 | goto skip; |
| 210 | if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) { |
| 211 | err = -EFAULT; |
| 212 | goto skip; |
| 213 | } |
| 214 | *off += raw_data[len_off]; |
| 215 | s -= raw_data[len_off]; |
| 216 | ret += raw_data[len_off]; |
| 217 | err = 0; |
| 218 | } |
| 219 | skip: |
| 220 | kfree(resp); |
| 221 | if (err) |
| 222 | return ret > 0 ? ret : err; |
| 223 | } |
| 224 | return ret; |
| 225 | } |
| 226 | |
| 227 | static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u, |
| 228 | size_t s, loff_t *off) |
| 229 | { |
| 230 | struct picolcd_data *data = f->private_data; |
| 231 | |
| 232 | if (s == 0) |
| 233 | return -EINVAL; |
| 234 | if (*off > 0x05fff) |
| 235 | return 0; |
| 236 | if (*off + s > 0x05fff) |
| 237 | s = 0x06000 - *off; |
| 238 | |
| 239 | if (data->status & PICOLCD_BOOTLOADER) |
| 240 | return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off); |
| 241 | else |
| 242 | return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off); |
| 243 | } |
| 244 | |
| 245 | /* erase block aligned to 64bytes boundary */ |
| 246 | static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id, |
| 247 | loff_t *off) |
| 248 | { |
| 249 | struct picolcd_pending *resp; |
| 250 | u8 raw_data[3]; |
| 251 | int len_off; |
| 252 | ssize_t ret = -EIO; |
| 253 | |
| 254 | if (*off & 0x3f) |
| 255 | return -EINVAL; |
| 256 | |
| 257 | len_off = _picolcd_flash_setaddr(data, raw_data, *off); |
| 258 | resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off); |
| 259 | if (!resp || !resp->in_report) |
| 260 | goto skip; |
| 261 | if (resp->in_report->id == REPORT_MEMORY || |
| 262 | resp->in_report->id == REPORT_BL_ERASE_MEMORY) { |
| 263 | if (memcmp(raw_data, resp->raw_data, len_off) != 0) |
| 264 | goto skip; |
| 265 | ret = 0; |
| 266 | } |
| 267 | skip: |
| 268 | kfree(resp); |
| 269 | return ret; |
| 270 | } |
| 271 | |
| 272 | /* write a given size of data (bounds check to be done by caller) */ |
| 273 | static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id, |
| 274 | const char __user *u, size_t s, loff_t *off) |
| 275 | { |
| 276 | struct picolcd_pending *resp; |
| 277 | u8 raw_data[36]; |
| 278 | ssize_t ret = 0; |
| 279 | int len_off, err = -EIO; |
| 280 | |
| 281 | while (s > 0) { |
| 282 | err = -EIO; |
| 283 | len_off = _picolcd_flash_setaddr(data, raw_data, *off); |
| 284 | raw_data[len_off] = s > 32 ? 32 : s; |
| 285 | if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) { |
| 286 | err = -EFAULT; |
| 287 | break; |
| 288 | } |
| 289 | resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, |
| 290 | len_off+1+raw_data[len_off]); |
| 291 | if (!resp || !resp->in_report) |
| 292 | goto skip; |
| 293 | if (resp->in_report->id == REPORT_MEMORY || |
| 294 | resp->in_report->id == REPORT_BL_WRITE_MEMORY) { |
| 295 | if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0) |
| 296 | goto skip; |
| 297 | *off += raw_data[len_off]; |
| 298 | s -= raw_data[len_off]; |
| 299 | ret += raw_data[len_off]; |
| 300 | err = 0; |
| 301 | } |
| 302 | skip: |
| 303 | kfree(resp); |
| 304 | if (err) |
| 305 | break; |
| 306 | } |
| 307 | return ret > 0 ? ret : err; |
| 308 | } |
| 309 | |
| 310 | static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u, |
| 311 | size_t s, loff_t *off) |
| 312 | { |
| 313 | struct picolcd_data *data = f->private_data; |
| 314 | ssize_t err, ret = 0; |
| 315 | int report_erase, report_write; |
| 316 | |
| 317 | if (s == 0) |
| 318 | return -EINVAL; |
| 319 | if (*off > 0x5fff) |
| 320 | return -ENOSPC; |
| 321 | if (s & 0x3f) |
| 322 | return -EINVAL; |
| 323 | if (*off & 0x3f) |
| 324 | return -EINVAL; |
| 325 | |
| 326 | if (data->status & PICOLCD_BOOTLOADER) { |
| 327 | report_erase = REPORT_BL_ERASE_MEMORY; |
| 328 | report_write = REPORT_BL_WRITE_MEMORY; |
| 329 | } else { |
| 330 | report_erase = REPORT_ERASE_MEMORY; |
| 331 | report_write = REPORT_WRITE_MEMORY; |
| 332 | } |
| 333 | mutex_lock(&data->mutex_flash); |
| 334 | while (s > 0) { |
| 335 | err = _picolcd_flash_erase64(data, report_erase, off); |
| 336 | if (err) |
| 337 | break; |
| 338 | err = _picolcd_flash_write(data, report_write, u, 64, off); |
| 339 | if (err < 0) |
| 340 | break; |
| 341 | ret += err; |
| 342 | *off += err; |
| 343 | s -= err; |
| 344 | if (err != 64) |
| 345 | break; |
| 346 | } |
| 347 | mutex_unlock(&data->mutex_flash); |
| 348 | return ret > 0 ? ret : err; |
| 349 | } |
| 350 | |
| 351 | /* |
| 352 | * Notes: |
| 353 | * - concurrent writing is prevented by mutex and all writes must be |
| 354 | * n*64 bytes and 64-byte aligned, each write being preceded by an |
| 355 | * ERASE which erases a 64byte block. |
| 356 | * If less than requested was written or an error is returned for an |
| 357 | * otherwise correct write request the next 64-byte block which should |
| 358 | * have been written is in undefined state (mostly: original, erased, |
| 359 | * (half-)written with write error) |
| 360 | * - reading can happen without special restriction |
| 361 | */ |
| 362 | static const struct file_operations picolcd_debug_flash_fops = { |
| 363 | .owner = THIS_MODULE, |
| 364 | .open = simple_open, |
| 365 | .read = picolcd_debug_flash_read, |
| 366 | .write = picolcd_debug_flash_write, |
| 367 | .llseek = generic_file_llseek, |
| 368 | }; |
| 369 | |
| 370 | |
| 371 | /* |
| 372 | * Helper code for HID report level dumping/debugging |
| 373 | */ |
Bruno Prémont | baacf9c | 2012-07-30 21:38:54 +0200 | [diff] [blame] | 374 | static const char * const error_codes[] = { |
Bruno Prémont | fabdbf2 | 2012-07-30 21:38:28 +0200 | [diff] [blame] | 375 | "success", "parameter missing", "data_missing", "block readonly", |
| 376 | "block not erasable", "block too big", "section overflow", |
| 377 | "invalid command length", "invalid data length", |
| 378 | }; |
| 379 | |
| 380 | static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data, |
| 381 | const size_t data_len) |
| 382 | { |
| 383 | int i, j; |
Bruno Prémont | 5ed84c3 | 2012-09-19 21:18:10 +0200 | [diff] [blame] | 384 | for (i = j = 0; i < data_len && j + 4 < dst_sz; i++) { |
Bruno Prémont | fabdbf2 | 2012-07-30 21:38:28 +0200 | [diff] [blame] | 385 | dst[j++] = hex_asc[(data[i] >> 4) & 0x0f]; |
| 386 | dst[j++] = hex_asc[data[i] & 0x0f]; |
| 387 | dst[j++] = ' '; |
| 388 | } |
Bruno Prémont | 5ed84c3 | 2012-09-19 21:18:10 +0200 | [diff] [blame] | 389 | dst[j] = '\0'; |
| 390 | if (j > 0) |
| 391 | dst[j-1] = '\n'; |
| 392 | if (i < data_len && j > 2) |
| 393 | dst[j-2] = dst[j-3] = '.'; |
Bruno Prémont | fabdbf2 | 2012-07-30 21:38:28 +0200 | [diff] [blame] | 394 | } |
| 395 | |
| 396 | void picolcd_debug_out_report(struct picolcd_data *data, |
| 397 | struct hid_device *hdev, struct hid_report *report) |
| 398 | { |
| 399 | u8 raw_data[70]; |
| 400 | int raw_size = (report->size >> 3) + 1; |
| 401 | char *buff; |
| 402 | #define BUFF_SZ 256 |
| 403 | |
| 404 | /* Avoid unnecessary overhead if debugfs is disabled */ |
Bruno Prémont | 56fa944 | 2012-09-30 22:04:19 +0200 | [diff] [blame] | 405 | if (list_empty(&hdev->debug_list)) |
Bruno Prémont | fabdbf2 | 2012-07-30 21:38:28 +0200 | [diff] [blame] | 406 | return; |
| 407 | |
| 408 | buff = kmalloc(BUFF_SZ, GFP_ATOMIC); |
| 409 | if (!buff) |
| 410 | return; |
| 411 | |
| 412 | snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ", |
| 413 | report->id, raw_size); |
| 414 | hid_debug_event(hdev, buff); |
| 415 | if (raw_size + 5 > sizeof(raw_data)) { |
| 416 | kfree(buff); |
| 417 | hid_debug_event(hdev, " TOO BIG\n"); |
| 418 | return; |
| 419 | } else { |
| 420 | raw_data[0] = report->id; |
| 421 | hid_output_report(report, raw_data); |
| 422 | dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size); |
| 423 | hid_debug_event(hdev, buff); |
| 424 | } |
| 425 | |
| 426 | switch (report->id) { |
| 427 | case REPORT_LED_STATE: |
| 428 | /* 1 data byte with GPO state */ |
| 429 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 430 | "REPORT_LED_STATE", report->id, raw_size-1); |
| 431 | hid_debug_event(hdev, buff); |
| 432 | snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]); |
| 433 | hid_debug_event(hdev, buff); |
| 434 | break; |
| 435 | case REPORT_BRIGHTNESS: |
| 436 | /* 1 data byte with brightness */ |
| 437 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 438 | "REPORT_BRIGHTNESS", report->id, raw_size-1); |
| 439 | hid_debug_event(hdev, buff); |
| 440 | snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]); |
| 441 | hid_debug_event(hdev, buff); |
| 442 | break; |
| 443 | case REPORT_CONTRAST: |
| 444 | /* 1 data byte with contrast */ |
| 445 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 446 | "REPORT_CONTRAST", report->id, raw_size-1); |
| 447 | hid_debug_event(hdev, buff); |
| 448 | snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]); |
| 449 | hid_debug_event(hdev, buff); |
| 450 | break; |
| 451 | case REPORT_RESET: |
| 452 | /* 2 data bytes with reset duration in ms */ |
| 453 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 454 | "REPORT_RESET", report->id, raw_size-1); |
| 455 | hid_debug_event(hdev, buff); |
| 456 | snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n", |
| 457 | raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]); |
| 458 | hid_debug_event(hdev, buff); |
| 459 | break; |
| 460 | case REPORT_LCD_CMD: |
| 461 | /* 63 data bytes with LCD commands */ |
| 462 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 463 | "REPORT_LCD_CMD", report->id, raw_size-1); |
| 464 | hid_debug_event(hdev, buff); |
| 465 | /* TODO: format decoding */ |
| 466 | break; |
| 467 | case REPORT_LCD_DATA: |
| 468 | /* 63 data bytes with LCD data */ |
| 469 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 470 | "REPORT_LCD_CMD", report->id, raw_size-1); |
| 471 | /* TODO: format decoding */ |
| 472 | hid_debug_event(hdev, buff); |
| 473 | break; |
| 474 | case REPORT_LCD_CMD_DATA: |
| 475 | /* 63 data bytes with LCD commands and data */ |
| 476 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 477 | "REPORT_LCD_CMD", report->id, raw_size-1); |
| 478 | /* TODO: format decoding */ |
| 479 | hid_debug_event(hdev, buff); |
| 480 | break; |
| 481 | case REPORT_EE_READ: |
| 482 | /* 3 data bytes with read area description */ |
| 483 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 484 | "REPORT_EE_READ", report->id, raw_size-1); |
| 485 | hid_debug_event(hdev, buff); |
| 486 | snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| 487 | raw_data[2], raw_data[1]); |
| 488 | hid_debug_event(hdev, buff); |
| 489 | snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| 490 | hid_debug_event(hdev, buff); |
| 491 | break; |
| 492 | case REPORT_EE_WRITE: |
| 493 | /* 3+1..20 data bytes with write area description */ |
| 494 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 495 | "REPORT_EE_WRITE", report->id, raw_size-1); |
| 496 | hid_debug_event(hdev, buff); |
| 497 | snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| 498 | raw_data[2], raw_data[1]); |
| 499 | hid_debug_event(hdev, buff); |
| 500 | snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| 501 | hid_debug_event(hdev, buff); |
| 502 | if (raw_data[3] == 0) { |
| 503 | snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| 504 | } else if (raw_data[3] + 4 <= raw_size) { |
| 505 | snprintf(buff, BUFF_SZ, "\tData: "); |
| 506 | hid_debug_event(hdev, buff); |
| 507 | dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); |
| 508 | } else { |
| 509 | snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| 510 | } |
| 511 | hid_debug_event(hdev, buff); |
| 512 | break; |
| 513 | case REPORT_ERASE_MEMORY: |
| 514 | case REPORT_BL_ERASE_MEMORY: |
| 515 | /* 3 data bytes with pointer inside erase block */ |
| 516 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 517 | "REPORT_ERASE_MEMORY", report->id, raw_size-1); |
| 518 | hid_debug_event(hdev, buff); |
| 519 | switch (data->addr_sz) { |
| 520 | case 2: |
| 521 | snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n", |
| 522 | raw_data[2], raw_data[1]); |
| 523 | break; |
| 524 | case 3: |
| 525 | snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n", |
| 526 | raw_data[3], raw_data[2], raw_data[1]); |
| 527 | break; |
| 528 | default: |
| 529 | snprintf(buff, BUFF_SZ, "\tNot supported\n"); |
| 530 | } |
| 531 | hid_debug_event(hdev, buff); |
| 532 | break; |
| 533 | case REPORT_READ_MEMORY: |
| 534 | case REPORT_BL_READ_MEMORY: |
| 535 | /* 4 data bytes with read area description */ |
| 536 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 537 | "REPORT_READ_MEMORY", report->id, raw_size-1); |
| 538 | hid_debug_event(hdev, buff); |
| 539 | switch (data->addr_sz) { |
| 540 | case 2: |
| 541 | snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| 542 | raw_data[2], raw_data[1]); |
| 543 | hid_debug_event(hdev, buff); |
| 544 | snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| 545 | break; |
| 546 | case 3: |
| 547 | snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", |
| 548 | raw_data[3], raw_data[2], raw_data[1]); |
| 549 | hid_debug_event(hdev, buff); |
| 550 | snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); |
| 551 | break; |
| 552 | default: |
| 553 | snprintf(buff, BUFF_SZ, "\tNot supported\n"); |
| 554 | } |
| 555 | hid_debug_event(hdev, buff); |
| 556 | break; |
| 557 | case REPORT_WRITE_MEMORY: |
| 558 | case REPORT_BL_WRITE_MEMORY: |
| 559 | /* 4+1..32 data bytes with write adrea description */ |
| 560 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 561 | "REPORT_WRITE_MEMORY", report->id, raw_size-1); |
| 562 | hid_debug_event(hdev, buff); |
| 563 | switch (data->addr_sz) { |
| 564 | case 2: |
| 565 | snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| 566 | raw_data[2], raw_data[1]); |
| 567 | hid_debug_event(hdev, buff); |
| 568 | snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| 569 | hid_debug_event(hdev, buff); |
| 570 | if (raw_data[3] == 0) { |
| 571 | snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| 572 | } else if (raw_data[3] + 4 <= raw_size) { |
| 573 | snprintf(buff, BUFF_SZ, "\tData: "); |
| 574 | hid_debug_event(hdev, buff); |
| 575 | dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); |
| 576 | } else { |
| 577 | snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| 578 | } |
| 579 | break; |
| 580 | case 3: |
| 581 | snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", |
| 582 | raw_data[3], raw_data[2], raw_data[1]); |
| 583 | hid_debug_event(hdev, buff); |
| 584 | snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); |
| 585 | hid_debug_event(hdev, buff); |
| 586 | if (raw_data[4] == 0) { |
| 587 | snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| 588 | } else if (raw_data[4] + 5 <= raw_size) { |
| 589 | snprintf(buff, BUFF_SZ, "\tData: "); |
| 590 | hid_debug_event(hdev, buff); |
| 591 | dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); |
| 592 | } else { |
| 593 | snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| 594 | } |
| 595 | break; |
| 596 | default: |
| 597 | snprintf(buff, BUFF_SZ, "\tNot supported\n"); |
| 598 | } |
| 599 | hid_debug_event(hdev, buff); |
| 600 | break; |
| 601 | case REPORT_SPLASH_RESTART: |
| 602 | /* TODO */ |
| 603 | break; |
| 604 | case REPORT_EXIT_KEYBOARD: |
| 605 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 606 | "REPORT_EXIT_KEYBOARD", report->id, raw_size-1); |
| 607 | hid_debug_event(hdev, buff); |
| 608 | snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", |
| 609 | raw_data[1] | (raw_data[2] << 8), |
| 610 | raw_data[2], raw_data[1]); |
| 611 | hid_debug_event(hdev, buff); |
| 612 | break; |
| 613 | case REPORT_VERSION: |
| 614 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 615 | "REPORT_VERSION", report->id, raw_size-1); |
| 616 | hid_debug_event(hdev, buff); |
| 617 | break; |
| 618 | case REPORT_DEVID: |
| 619 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 620 | "REPORT_DEVID", report->id, raw_size-1); |
| 621 | hid_debug_event(hdev, buff); |
| 622 | break; |
| 623 | case REPORT_SPLASH_SIZE: |
| 624 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 625 | "REPORT_SPLASH_SIZE", report->id, raw_size-1); |
| 626 | hid_debug_event(hdev, buff); |
| 627 | break; |
| 628 | case REPORT_HOOK_VERSION: |
| 629 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 630 | "REPORT_HOOK_VERSION", report->id, raw_size-1); |
| 631 | hid_debug_event(hdev, buff); |
| 632 | break; |
| 633 | case REPORT_EXIT_FLASHER: |
| 634 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 635 | "REPORT_VERSION", report->id, raw_size-1); |
| 636 | hid_debug_event(hdev, buff); |
| 637 | snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", |
| 638 | raw_data[1] | (raw_data[2] << 8), |
| 639 | raw_data[2], raw_data[1]); |
| 640 | hid_debug_event(hdev, buff); |
| 641 | break; |
| 642 | default: |
| 643 | snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| 644 | "<unknown>", report->id, raw_size-1); |
| 645 | hid_debug_event(hdev, buff); |
| 646 | break; |
| 647 | } |
| 648 | wake_up_interruptible(&hdev->debug_wait); |
| 649 | kfree(buff); |
| 650 | } |
| 651 | |
| 652 | void picolcd_debug_raw_event(struct picolcd_data *data, |
| 653 | struct hid_device *hdev, struct hid_report *report, |
| 654 | u8 *raw_data, int size) |
| 655 | { |
| 656 | char *buff; |
| 657 | |
| 658 | #define BUFF_SZ 256 |
| 659 | /* Avoid unnecessary overhead if debugfs is disabled */ |
Bruno Prémont | 63583c6 | 2012-08-19 19:33:02 +0200 | [diff] [blame] | 660 | if (list_empty(&hdev->debug_list)) |
Bruno Prémont | fabdbf2 | 2012-07-30 21:38:28 +0200 | [diff] [blame] | 661 | return; |
| 662 | |
| 663 | buff = kmalloc(BUFF_SZ, GFP_ATOMIC); |
| 664 | if (!buff) |
| 665 | return; |
| 666 | |
| 667 | switch (report->id) { |
| 668 | case REPORT_ERROR_CODE: |
| 669 | /* 2 data bytes with affected report and error code */ |
| 670 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 671 | "REPORT_ERROR_CODE", report->id, size-1); |
| 672 | hid_debug_event(hdev, buff); |
| 673 | if (raw_data[2] < ARRAY_SIZE(error_codes)) |
| 674 | snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n", |
| 675 | raw_data[2], error_codes[raw_data[2]], raw_data[1]); |
| 676 | else |
| 677 | snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n", |
| 678 | raw_data[2], raw_data[1]); |
| 679 | hid_debug_event(hdev, buff); |
| 680 | break; |
| 681 | case REPORT_KEY_STATE: |
| 682 | /* 2 data bytes with key state */ |
| 683 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 684 | "REPORT_KEY_STATE", report->id, size-1); |
| 685 | hid_debug_event(hdev, buff); |
| 686 | if (raw_data[1] == 0) |
| 687 | snprintf(buff, BUFF_SZ, "\tNo key pressed\n"); |
| 688 | else if (raw_data[2] == 0) |
| 689 | snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n", |
| 690 | raw_data[1], raw_data[1]); |
| 691 | else |
| 692 | snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n", |
| 693 | raw_data[1], raw_data[1], raw_data[2], raw_data[2]); |
| 694 | hid_debug_event(hdev, buff); |
| 695 | break; |
| 696 | case REPORT_IR_DATA: |
| 697 | /* Up to 20 byes of IR scancode data */ |
| 698 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 699 | "REPORT_IR_DATA", report->id, size-1); |
| 700 | hid_debug_event(hdev, buff); |
| 701 | if (raw_data[1] == 0) { |
| 702 | snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n"); |
| 703 | hid_debug_event(hdev, buff); |
| 704 | } else if (raw_data[1] + 1 <= size) { |
| 705 | snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ", |
Bruno Prémont | f2df5b7 | 2012-08-19 19:33:33 +0200 | [diff] [blame] | 706 | raw_data[1]); |
Bruno Prémont | fabdbf2 | 2012-07-30 21:38:28 +0200 | [diff] [blame] | 707 | hid_debug_event(hdev, buff); |
Bruno Prémont | f2df5b7 | 2012-08-19 19:33:33 +0200 | [diff] [blame] | 708 | dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]); |
Bruno Prémont | fabdbf2 | 2012-07-30 21:38:28 +0200 | [diff] [blame] | 709 | hid_debug_event(hdev, buff); |
| 710 | } else { |
| 711 | snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n", |
| 712 | raw_data[1]-1); |
| 713 | hid_debug_event(hdev, buff); |
| 714 | } |
| 715 | break; |
| 716 | case REPORT_EE_DATA: |
| 717 | /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */ |
| 718 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 719 | "REPORT_EE_DATA", report->id, size-1); |
| 720 | hid_debug_event(hdev, buff); |
| 721 | snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| 722 | raw_data[2], raw_data[1]); |
| 723 | hid_debug_event(hdev, buff); |
| 724 | snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| 725 | hid_debug_event(hdev, buff); |
| 726 | if (raw_data[3] == 0) { |
| 727 | snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| 728 | hid_debug_event(hdev, buff); |
| 729 | } else if (raw_data[3] + 4 <= size) { |
| 730 | snprintf(buff, BUFF_SZ, "\tData: "); |
| 731 | hid_debug_event(hdev, buff); |
| 732 | dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); |
| 733 | hid_debug_event(hdev, buff); |
| 734 | } else { |
| 735 | snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| 736 | hid_debug_event(hdev, buff); |
| 737 | } |
| 738 | break; |
| 739 | case REPORT_MEMORY: |
| 740 | /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */ |
| 741 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 742 | "REPORT_MEMORY", report->id, size-1); |
| 743 | hid_debug_event(hdev, buff); |
| 744 | switch (data->addr_sz) { |
| 745 | case 2: |
| 746 | snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| 747 | raw_data[2], raw_data[1]); |
| 748 | hid_debug_event(hdev, buff); |
| 749 | snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| 750 | hid_debug_event(hdev, buff); |
| 751 | if (raw_data[3] == 0) { |
| 752 | snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| 753 | } else if (raw_data[3] + 4 <= size) { |
| 754 | snprintf(buff, BUFF_SZ, "\tData: "); |
| 755 | hid_debug_event(hdev, buff); |
| 756 | dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); |
| 757 | } else { |
| 758 | snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| 759 | } |
| 760 | break; |
| 761 | case 3: |
| 762 | snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", |
| 763 | raw_data[3], raw_data[2], raw_data[1]); |
| 764 | hid_debug_event(hdev, buff); |
| 765 | snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); |
| 766 | hid_debug_event(hdev, buff); |
| 767 | if (raw_data[4] == 0) { |
| 768 | snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| 769 | } else if (raw_data[4] + 5 <= size) { |
| 770 | snprintf(buff, BUFF_SZ, "\tData: "); |
| 771 | hid_debug_event(hdev, buff); |
| 772 | dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); |
| 773 | } else { |
| 774 | snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| 775 | } |
| 776 | break; |
| 777 | default: |
| 778 | snprintf(buff, BUFF_SZ, "\tNot supported\n"); |
| 779 | } |
| 780 | hid_debug_event(hdev, buff); |
| 781 | break; |
| 782 | case REPORT_VERSION: |
| 783 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 784 | "REPORT_VERSION", report->id, size-1); |
| 785 | hid_debug_event(hdev, buff); |
| 786 | snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", |
| 787 | raw_data[2], raw_data[1]); |
| 788 | hid_debug_event(hdev, buff); |
| 789 | break; |
| 790 | case REPORT_BL_ERASE_MEMORY: |
| 791 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 792 | "REPORT_BL_ERASE_MEMORY", report->id, size-1); |
| 793 | hid_debug_event(hdev, buff); |
| 794 | /* TODO */ |
| 795 | break; |
| 796 | case REPORT_BL_READ_MEMORY: |
| 797 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 798 | "REPORT_BL_READ_MEMORY", report->id, size-1); |
| 799 | hid_debug_event(hdev, buff); |
| 800 | /* TODO */ |
| 801 | break; |
| 802 | case REPORT_BL_WRITE_MEMORY: |
| 803 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 804 | "REPORT_BL_WRITE_MEMORY", report->id, size-1); |
| 805 | hid_debug_event(hdev, buff); |
| 806 | /* TODO */ |
| 807 | break; |
| 808 | case REPORT_DEVID: |
| 809 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 810 | "REPORT_DEVID", report->id, size-1); |
| 811 | hid_debug_event(hdev, buff); |
| 812 | snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n", |
| 813 | raw_data[1], raw_data[2], raw_data[3], raw_data[4]); |
| 814 | hid_debug_event(hdev, buff); |
| 815 | snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n", |
| 816 | raw_data[5]); |
| 817 | hid_debug_event(hdev, buff); |
| 818 | break; |
| 819 | case REPORT_SPLASH_SIZE: |
| 820 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 821 | "REPORT_SPLASH_SIZE", report->id, size-1); |
| 822 | hid_debug_event(hdev, buff); |
| 823 | snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n", |
| 824 | (raw_data[2] << 8) | raw_data[1]); |
| 825 | hid_debug_event(hdev, buff); |
| 826 | snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n", |
| 827 | (raw_data[4] << 8) | raw_data[3]); |
| 828 | hid_debug_event(hdev, buff); |
| 829 | break; |
| 830 | case REPORT_HOOK_VERSION: |
| 831 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 832 | "REPORT_HOOK_VERSION", report->id, size-1); |
| 833 | hid_debug_event(hdev, buff); |
| 834 | snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", |
| 835 | raw_data[1], raw_data[2]); |
| 836 | hid_debug_event(hdev, buff); |
| 837 | break; |
| 838 | default: |
| 839 | snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| 840 | "<unknown>", report->id, size-1); |
| 841 | hid_debug_event(hdev, buff); |
| 842 | break; |
| 843 | } |
| 844 | wake_up_interruptible(&hdev->debug_wait); |
| 845 | kfree(buff); |
| 846 | } |
| 847 | |
| 848 | void picolcd_init_devfs(struct picolcd_data *data, |
| 849 | struct hid_report *eeprom_r, struct hid_report *eeprom_w, |
| 850 | struct hid_report *flash_r, struct hid_report *flash_w, |
| 851 | struct hid_report *reset) |
| 852 | { |
| 853 | struct hid_device *hdev = data->hdev; |
| 854 | |
| 855 | mutex_init(&data->mutex_flash); |
| 856 | |
| 857 | /* reset */ |
| 858 | if (reset) |
| 859 | data->debug_reset = debugfs_create_file("reset", 0600, |
| 860 | hdev->debug_dir, data, &picolcd_debug_reset_fops); |
| 861 | |
| 862 | /* eeprom */ |
| 863 | if (eeprom_r || eeprom_w) |
| 864 | data->debug_eeprom = debugfs_create_file("eeprom", |
| 865 | (eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0), |
| 866 | hdev->debug_dir, data, &picolcd_debug_eeprom_fops); |
| 867 | |
| 868 | /* flash */ |
| 869 | if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8) |
| 870 | data->addr_sz = flash_r->field[0]->report_count - 1; |
| 871 | else |
| 872 | data->addr_sz = -1; |
| 873 | if (data->addr_sz == 2 || data->addr_sz == 3) { |
| 874 | data->debug_flash = debugfs_create_file("flash", |
| 875 | (flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0), |
| 876 | hdev->debug_dir, data, &picolcd_debug_flash_fops); |
| 877 | } else if (flash_r || flash_w) |
| 878 | hid_warn(hdev, "Unexpected FLASH access reports, please submit rdesc for review\n"); |
| 879 | } |
| 880 | |
| 881 | void picolcd_exit_devfs(struct picolcd_data *data) |
| 882 | { |
| 883 | struct dentry *dent; |
| 884 | |
| 885 | dent = data->debug_reset; |
| 886 | data->debug_reset = NULL; |
| 887 | if (dent) |
| 888 | debugfs_remove(dent); |
| 889 | dent = data->debug_eeprom; |
| 890 | data->debug_eeprom = NULL; |
| 891 | if (dent) |
| 892 | debugfs_remove(dent); |
| 893 | dent = data->debug_flash; |
| 894 | data->debug_flash = NULL; |
| 895 | if (dent) |
| 896 | debugfs_remove(dent); |
| 897 | mutex_destroy(&data->mutex_flash); |
| 898 | } |
| 899 | |