Benjamin Herrenschmidt | 5b9ca52 | 2006-01-07 11:41:02 +1100 | [diff] [blame^] | 1 | #include <linux/config.h> |
| 2 | #include <linux/types.h> |
| 3 | #include <linux/init.h> |
| 4 | #include <linux/delay.h> |
| 5 | #include <linux/kernel.h> |
| 6 | #include <linux/interrupt.h> |
| 7 | #include <linux/spinlock.h> |
| 8 | |
| 9 | #include <asm/pmac_feature.h> |
| 10 | #include <asm/pmac_pfunc.h> |
| 11 | |
| 12 | #define DBG(fmt...) printk(fmt) |
| 13 | |
| 14 | static irqreturn_t macio_gpio_irq(int irq, void *data, struct pt_regs *regs) |
| 15 | { |
| 16 | pmf_do_irq(data); |
| 17 | |
| 18 | return IRQ_HANDLED; |
| 19 | } |
| 20 | |
| 21 | static int macio_do_gpio_irq_enable(struct pmf_function *func) |
| 22 | { |
| 23 | if (func->node->n_intrs < 1) |
| 24 | return -EINVAL; |
| 25 | |
| 26 | return request_irq(func->node->intrs[0].line, macio_gpio_irq, 0, |
| 27 | func->node->name, func); |
| 28 | } |
| 29 | |
| 30 | static int macio_do_gpio_irq_disable(struct pmf_function *func) |
| 31 | { |
| 32 | if (func->node->n_intrs < 1) |
| 33 | return -EINVAL; |
| 34 | |
| 35 | free_irq(func->node->intrs[0].line, func); |
| 36 | return 0; |
| 37 | } |
| 38 | |
| 39 | static int macio_do_gpio_write(PMF_STD_ARGS, u8 value, u8 mask) |
| 40 | { |
| 41 | u8 __iomem *addr = (u8 __iomem *)func->driver_data; |
| 42 | unsigned long flags; |
| 43 | u8 tmp; |
| 44 | |
| 45 | /* Check polarity */ |
| 46 | if (args && args->count && !args->u[0].v) |
| 47 | value = ~value; |
| 48 | |
| 49 | /* Toggle the GPIO */ |
| 50 | spin_lock_irqsave(&feature_lock, flags); |
| 51 | tmp = readb(addr); |
| 52 | tmp = (tmp & ~mask) | (value & mask); |
| 53 | DBG("Do write 0x%02x to GPIO %s (%p)\n", |
| 54 | tmp, func->node->full_name, addr); |
| 55 | writeb(tmp, addr); |
| 56 | spin_unlock_irqrestore(&feature_lock, flags); |
| 57 | |
| 58 | return 0; |
| 59 | } |
| 60 | |
| 61 | static int macio_do_gpio_read(PMF_STD_ARGS, u8 mask, int rshift, u8 xor) |
| 62 | { |
| 63 | u8 __iomem *addr = (u8 __iomem *)func->driver_data; |
| 64 | u32 value; |
| 65 | |
| 66 | /* Check if we have room for reply */ |
| 67 | if (args == NULL || args->count == 0 || args->u[0].p == NULL) |
| 68 | return -EINVAL; |
| 69 | |
| 70 | value = readb(addr); |
| 71 | *args->u[0].p = ((value & mask) >> rshift) ^ xor; |
| 72 | |
| 73 | return 0; |
| 74 | } |
| 75 | |
| 76 | static int macio_do_delay(PMF_STD_ARGS, u32 duration) |
| 77 | { |
| 78 | /* assume we can sleep ! */ |
| 79 | msleep((duration + 999) / 1000); |
| 80 | return 0; |
| 81 | } |
| 82 | |
| 83 | static struct pmf_handlers macio_gpio_handlers = { |
| 84 | .irq_enable = macio_do_gpio_irq_enable, |
| 85 | .irq_disable = macio_do_gpio_irq_disable, |
| 86 | .write_gpio = macio_do_gpio_write, |
| 87 | .read_gpio = macio_do_gpio_read, |
| 88 | .delay = macio_do_delay, |
| 89 | }; |
| 90 | |
| 91 | static void macio_gpio_init_one(struct macio_chip *macio) |
| 92 | { |
| 93 | struct device_node *gparent, *gp; |
| 94 | |
| 95 | /* |
| 96 | * Find the "gpio" parent node |
| 97 | */ |
| 98 | |
| 99 | for (gparent = NULL; |
| 100 | (gparent = of_get_next_child(macio->of_node, gparent)) != NULL;) |
| 101 | if (strcmp(gparent->name, "gpio") == 0) |
| 102 | break; |
| 103 | if (gparent == NULL) |
| 104 | return; |
| 105 | |
| 106 | DBG("Installing GPIO functions for macio %s\n", |
| 107 | macio->of_node->full_name); |
| 108 | |
| 109 | /* |
| 110 | * Ok, got one, we dont need anything special to track them down, so |
| 111 | * we just create them all |
| 112 | */ |
| 113 | for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;) { |
| 114 | u32 *reg = (u32 *)get_property(gp, "reg", NULL); |
| 115 | unsigned long offset; |
| 116 | if (reg == NULL) |
| 117 | continue; |
| 118 | offset = *reg; |
| 119 | /* Deal with old style device-tree. We can safely hard code the |
| 120 | * offset for now too even if it's a bit gross ... |
| 121 | */ |
| 122 | if (offset < 0x50) |
| 123 | offset += 0x50; |
| 124 | offset += (unsigned long)macio->base; |
| 125 | pmf_register_driver(gp, &macio_gpio_handlers, (void *)offset); |
| 126 | } |
| 127 | |
| 128 | DBG("Calling initial GPIO functions for macio %s\n", |
| 129 | macio->of_node->full_name); |
| 130 | |
| 131 | /* And now we run all the init ones */ |
| 132 | for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;) |
| 133 | pmf_do_functions(gp, NULL, 0, PMF_FLAGS_ON_INIT, NULL); |
| 134 | |
| 135 | /* Note: We do not at this point implement the "at sleep" or "at wake" |
| 136 | * functions. I yet to find any for GPIOs anyway |
| 137 | */ |
| 138 | } |
| 139 | |
| 140 | static int macio_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask) |
| 141 | { |
| 142 | struct macio_chip *macio = func->driver_data; |
| 143 | unsigned long flags; |
| 144 | |
| 145 | spin_lock_irqsave(&feature_lock, flags); |
| 146 | MACIO_OUT32(offset, (MACIO_IN32(offset) & ~mask) | (value & mask)); |
| 147 | spin_unlock_irqrestore(&feature_lock, flags); |
| 148 | return 0; |
| 149 | } |
| 150 | |
| 151 | static int macio_do_read_reg32(PMF_STD_ARGS, u32 offset) |
| 152 | { |
| 153 | struct macio_chip *macio = func->driver_data; |
| 154 | |
| 155 | /* Check if we have room for reply */ |
| 156 | if (args == NULL || args->count == 0 || args->u[0].p == NULL) |
| 157 | return -EINVAL; |
| 158 | |
| 159 | *args->u[0].p = MACIO_IN32(offset); |
| 160 | return 0; |
| 161 | } |
| 162 | |
| 163 | static int macio_do_write_reg8(PMF_STD_ARGS, u32 offset, u8 value, u8 mask) |
| 164 | { |
| 165 | struct macio_chip *macio = func->driver_data; |
| 166 | unsigned long flags; |
| 167 | |
| 168 | spin_lock_irqsave(&feature_lock, flags); |
| 169 | MACIO_OUT8(offset, (MACIO_IN8(offset) & ~mask) | (value & mask)); |
| 170 | spin_unlock_irqrestore(&feature_lock, flags); |
| 171 | return 0; |
| 172 | } |
| 173 | |
| 174 | static int macio_do_read_reg8(PMF_STD_ARGS, u32 offset) |
| 175 | { |
| 176 | struct macio_chip *macio = func->driver_data; |
| 177 | |
| 178 | /* Check if we have room for reply */ |
| 179 | if (args == NULL || args->count == 0 || args->u[0].p == NULL) |
| 180 | return -EINVAL; |
| 181 | |
| 182 | *((u8 *)(args->u[0].p)) = MACIO_IN8(offset); |
| 183 | return 0; |
| 184 | } |
| 185 | |
| 186 | static int macio_do_read_reg32_msrx(PMF_STD_ARGS, u32 offset, u32 mask, |
| 187 | u32 shift, u32 xor) |
| 188 | { |
| 189 | struct macio_chip *macio = func->driver_data; |
| 190 | |
| 191 | /* Check if we have room for reply */ |
| 192 | if (args == NULL || args->count == 0 || args->u[0].p == NULL) |
| 193 | return -EINVAL; |
| 194 | |
| 195 | *args->u[0].p = ((MACIO_IN32(offset) & mask) >> shift) ^ xor; |
| 196 | return 0; |
| 197 | } |
| 198 | |
| 199 | static int macio_do_read_reg8_msrx(PMF_STD_ARGS, u32 offset, u32 mask, |
| 200 | u32 shift, u32 xor) |
| 201 | { |
| 202 | struct macio_chip *macio = func->driver_data; |
| 203 | |
| 204 | /* Check if we have room for reply */ |
| 205 | if (args == NULL || args->count == 0 || args->u[0].p == NULL) |
| 206 | return -EINVAL; |
| 207 | |
| 208 | *((u8 *)(args->u[0].p)) = ((MACIO_IN8(offset) & mask) >> shift) ^ xor; |
| 209 | return 0; |
| 210 | } |
| 211 | |
| 212 | static int macio_do_write_reg32_slm(PMF_STD_ARGS, u32 offset, u32 shift, |
| 213 | u32 mask) |
| 214 | { |
| 215 | struct macio_chip *macio = func->driver_data; |
| 216 | unsigned long flags; |
| 217 | u32 tmp, val; |
| 218 | |
| 219 | /* Check args */ |
| 220 | if (args == NULL || args->count == 0) |
| 221 | return -EINVAL; |
| 222 | |
| 223 | spin_lock_irqsave(&feature_lock, flags); |
| 224 | tmp = MACIO_IN32(offset); |
| 225 | val = args->u[0].v << shift; |
| 226 | tmp = (tmp & ~mask) | (val & mask); |
| 227 | MACIO_OUT32(offset, tmp); |
| 228 | spin_unlock_irqrestore(&feature_lock, flags); |
| 229 | return 0; |
| 230 | } |
| 231 | |
| 232 | static int macio_do_write_reg8_slm(PMF_STD_ARGS, u32 offset, u32 shift, |
| 233 | u32 mask) |
| 234 | { |
| 235 | struct macio_chip *macio = func->driver_data; |
| 236 | unsigned long flags; |
| 237 | u32 tmp, val; |
| 238 | |
| 239 | /* Check args */ |
| 240 | if (args == NULL || args->count == 0) |
| 241 | return -EINVAL; |
| 242 | |
| 243 | spin_lock_irqsave(&feature_lock, flags); |
| 244 | tmp = MACIO_IN8(offset); |
| 245 | val = args->u[0].v << shift; |
| 246 | tmp = (tmp & ~mask) | (val & mask); |
| 247 | MACIO_OUT8(offset, tmp); |
| 248 | spin_unlock_irqrestore(&feature_lock, flags); |
| 249 | return 0; |
| 250 | } |
| 251 | |
| 252 | static struct pmf_handlers macio_mmio_handlers = { |
| 253 | .write_reg32 = macio_do_write_reg32, |
| 254 | .read_reg32 = macio_do_read_reg32, |
| 255 | .write_reg8 = macio_do_write_reg8, |
| 256 | .read_reg32 = macio_do_read_reg8, |
| 257 | .read_reg32_msrx = macio_do_read_reg32_msrx, |
| 258 | .read_reg8_msrx = macio_do_read_reg8_msrx, |
| 259 | .write_reg32_slm = macio_do_write_reg32_slm, |
| 260 | .write_reg8_slm = macio_do_write_reg8_slm, |
| 261 | .delay = macio_do_delay, |
| 262 | }; |
| 263 | |
| 264 | static void macio_mmio_init_one(struct macio_chip *macio) |
| 265 | { |
| 266 | DBG("Installing MMIO functions for macio %s\n", |
| 267 | macio->of_node->full_name); |
| 268 | |
| 269 | pmf_register_driver(macio->of_node, &macio_mmio_handlers, macio); |
| 270 | } |
| 271 | |
| 272 | static struct device_node *unin_hwclock; |
| 273 | |
| 274 | static int unin_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask) |
| 275 | { |
| 276 | unsigned long flags; |
| 277 | |
| 278 | spin_lock_irqsave(&feature_lock, flags); |
| 279 | /* This is fairly bogus in darwin, but it should work for our needs |
| 280 | * implemeted that way: |
| 281 | */ |
| 282 | UN_OUT(offset, (UN_IN(offset) & ~mask) | (value & mask)); |
| 283 | spin_unlock_irqrestore(&feature_lock, flags); |
| 284 | return 0; |
| 285 | } |
| 286 | |
| 287 | |
| 288 | static struct pmf_handlers unin_mmio_handlers = { |
| 289 | .write_reg32 = unin_do_write_reg32, |
| 290 | .delay = macio_do_delay, |
| 291 | }; |
| 292 | |
| 293 | static void uninorth_install_pfunc(void) |
| 294 | { |
| 295 | struct device_node *np; |
| 296 | |
| 297 | DBG("Installing functions for UniN %s\n", |
| 298 | uninorth_node->full_name); |
| 299 | |
| 300 | /* |
| 301 | * Install handlers for the bridge itself |
| 302 | */ |
| 303 | pmf_register_driver(uninorth_node, &unin_mmio_handlers, NULL); |
| 304 | pmf_do_functions(uninorth_node, NULL, 0, PMF_FLAGS_ON_INIT, NULL); |
| 305 | |
| 306 | |
| 307 | /* |
| 308 | * Install handlers for the hwclock child if any |
| 309 | */ |
| 310 | for (np = NULL; (np = of_get_next_child(uninorth_node, np)) != NULL;) |
| 311 | if (strcmp(np->name, "hw-clock") == 0) { |
| 312 | unin_hwclock = np; |
| 313 | break; |
| 314 | } |
| 315 | if (unin_hwclock) { |
| 316 | DBG("Installing functions for UniN clock %s\n", |
| 317 | unin_hwclock->full_name); |
| 318 | pmf_register_driver(unin_hwclock, &unin_mmio_handlers, NULL); |
| 319 | pmf_do_functions(unin_hwclock, NULL, 0, PMF_FLAGS_ON_INIT, |
| 320 | NULL); |
| 321 | } |
| 322 | } |
| 323 | |
| 324 | /* We export this as the SMP code might init us early */ |
| 325 | int __init pmac_pfunc_base_install(void) |
| 326 | { |
| 327 | static int pfbase_inited; |
| 328 | int i; |
| 329 | |
| 330 | if (pfbase_inited) |
| 331 | return 0; |
| 332 | pfbase_inited = 1; |
| 333 | |
| 334 | |
| 335 | DBG("Installing base platform functions...\n"); |
| 336 | |
| 337 | /* |
| 338 | * Locate mac-io chips and install handlers |
| 339 | */ |
| 340 | for (i = 0 ; i < MAX_MACIO_CHIPS; i++) { |
| 341 | if (macio_chips[i].of_node) { |
| 342 | macio_mmio_init_one(&macio_chips[i]); |
| 343 | macio_gpio_init_one(&macio_chips[i]); |
| 344 | } |
| 345 | } |
| 346 | |
| 347 | /* |
| 348 | * Install handlers for northbridge and direct mapped hwclock |
| 349 | * if any. We do not implement the config space access callback |
| 350 | * which is only ever used for functions that we do not call in |
| 351 | * the current driver (enabling/disabling cells in U2, mostly used |
| 352 | * to restore the PCI settings, we do that differently) |
| 353 | */ |
| 354 | if (uninorth_node && uninorth_base) |
| 355 | uninorth_install_pfunc(); |
| 356 | |
| 357 | DBG("All base functions installed\n"); |
| 358 | |
| 359 | return 0; |
| 360 | } |
| 361 | |
| 362 | arch_initcall(pmac_pfunc_base_install); |
| 363 | |
| 364 | #ifdef CONFIG_PM |
| 365 | |
| 366 | /* Those can be called by pmac_feature. Ultimately, I should use a sysdev |
| 367 | * or a device, but for now, that's good enough until I sort out some |
| 368 | * ordering issues. Also, we do not bother with GPIOs, as so far I yet have |
| 369 | * to see a case where a GPIO function has the on-suspend or on-resume bit |
| 370 | */ |
| 371 | void pmac_pfunc_base_suspend(void) |
| 372 | { |
| 373 | int i; |
| 374 | |
| 375 | for (i = 0 ; i < MAX_MACIO_CHIPS; i++) { |
| 376 | if (macio_chips[i].of_node) |
| 377 | pmf_do_functions(macio_chips[i].of_node, NULL, 0, |
| 378 | PMF_FLAGS_ON_SLEEP, NULL); |
| 379 | } |
| 380 | if (uninorth_node) |
| 381 | pmf_do_functions(uninorth_node, NULL, 0, |
| 382 | PMF_FLAGS_ON_SLEEP, NULL); |
| 383 | if (unin_hwclock) |
| 384 | pmf_do_functions(unin_hwclock, NULL, 0, |
| 385 | PMF_FLAGS_ON_SLEEP, NULL); |
| 386 | } |
| 387 | |
| 388 | void pmac_pfunc_base_resume(void) |
| 389 | { |
| 390 | int i; |
| 391 | |
| 392 | if (unin_hwclock) |
| 393 | pmf_do_functions(unin_hwclock, NULL, 0, |
| 394 | PMF_FLAGS_ON_WAKE, NULL); |
| 395 | if (uninorth_node) |
| 396 | pmf_do_functions(uninorth_node, NULL, 0, |
| 397 | PMF_FLAGS_ON_WAKE, NULL); |
| 398 | for (i = 0 ; i < MAX_MACIO_CHIPS; i++) { |
| 399 | if (macio_chips[i].of_node) |
| 400 | pmf_do_functions(macio_chips[i].of_node, NULL, 0, |
| 401 | PMF_FLAGS_ON_WAKE, NULL); |
| 402 | } |
| 403 | } |
| 404 | |
| 405 | #endif /* CONFIG_PM */ |