Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 608308682addfdc7b8e2aee88f0e028331d88e4d / . / arch / arm / boot / dts / stih407-pinctrl.dtsi
blob: 402844cb31524d2f9e75f06b901e7dc9c2496897 [file] [log] [blame]
Maxime Coquelinf563a572014-02-27 13:27:27 +0100[diff] [blame]1/*
2 * Copyright (C) 2014 STMicroelectronics Limited.
3 * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * publishhed by the Free Software Foundation.
8 */
9#include "st-pincfg.h"
10#include <dt-bindings/interrupt-controller/arm-gic.h>
11/ {
12
13 aliases {
14 /* 0-5: PIO_SBC */
15 gpio0 = &pio0;
16 gpio1 = &pio1;
17 gpio2 = &pio2;
18 gpio3 = &pio3;
19 gpio4 = &pio4;
20 gpio5 = &pio5;
21 /* 10-19: PIO_FRONT0 */
22 gpio6 = &pio10;
23 gpio7 = &pio11;
24 gpio8 = &pio12;
25 gpio9 = &pio13;
26 gpio10 = &pio14;
27 gpio11 = &pio15;
28 gpio12 = &pio16;
29 gpio13 = &pio17;
30 gpio14 = &pio18;
31 gpio15 = &pio19;
32 /* 20: PIO_FRONT1 */
33 gpio16 = &pio20;
34 /* 30-35: PIO_REAR */
35 gpio17 = &pio30;
36 gpio18 = &pio31;
37 gpio19 = &pio32;
38 gpio20 = &pio33;
39 gpio21 = &pio34;
40 gpio22 = &pio35;
41 /* 40-42: PIO_FLASH */
42 gpio23 = &pio40;
43 gpio24 = &pio41;
44 gpio25 = &pio42;
45 };
46
47 soc {
48 pin-controller-sbc {
49 #address-cells = <1>;
50 #size-cells = <1>;
51 compatible = "st,stih407-sbc-pinctrl";
52 st,syscfg = <&syscfg_sbc>;
53 reg = <0x0961f080 0x4>;
54 reg-names = "irqmux";
55 interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
56 interrupts-names = "irqmux";
57 ranges = <0 0x09610000 0x6000>;
58
59 pio0: gpio@09610000 {
60 gpio-controller;
61 #gpio-cells = <1>;
62 interrupt-controller;
63 #interrupt-cells = <2>;
64 reg = <0x0 0x100>;
65 st,bank-name = "PIO0";
66 };
67 pio1: gpio@09611000 {
68 gpio-controller;
69 #gpio-cells = <1>;
70 interrupt-controller;
71 #interrupt-cells = <2>;
72 reg = <0x1000 0x100>;
73 st,bank-name = "PIO1";
74 };
75 pio2: gpio@09612000 {
76 gpio-controller;
77 #gpio-cells = <1>;
78 interrupt-controller;
79 #interrupt-cells = <2>;
80 reg = <0x2000 0x100>;
81 st,bank-name = "PIO2";
82 };
83 pio3: gpio@09613000 {
84 gpio-controller;
85 #gpio-cells = <1>;
86 interrupt-controller;
87 #interrupt-cells = <2>;
88 reg = <0x3000 0x100>;
89 st,bank-name = "PIO3";
90 };
91 pio4: gpio@09614000 {
92 gpio-controller;
93 #gpio-cells = <1>;
94 interrupt-controller;
95 #interrupt-cells = <2>;
96 reg = <0x4000 0x100>;
97 st,bank-name = "PIO4";
98 };
99
100 pio5: gpio@09615000 {
101 gpio-controller;
102 #gpio-cells = <1>;
103 interrupt-controller;
104 #interrupt-cells = <2>;
105 reg = <0x5000 0x100>;
106 st,bank-name = "PIO5";
107 };
108
109 rc {
110 pinctrl_ir: ir0 {
111 st,pins {
112 ir = <&pio4 0 ALT2 IN>;
113 };
114 };
115 };
116
117 /* SBC_ASC0 - UART10 */
118 sbc_serial0 {
119 pinctrl_sbc_serial0: sbc_serial0-0 {
120 st,pins {
121 tx = <&pio3 4 ALT1 OUT>;
122 rx = <&pio3 5 ALT1 IN>;
123 };
124 };
125 };
126 /* SBC_ASC1 - UART11 */
127 sbc_serial1 {
128 pinctrl_sbc_serial1: sbc_serial1-0 {
129 st,pins {
130 tx = <&pio2 6 ALT3 OUT>;
131 rx = <&pio2 7 ALT3 IN>;
132 };
133 };
134 };
135
136 i2c10 {
137 pinctrl_i2c10_default: i2c10-default {
138 st,pins {
139 sda = <&pio4 6 ALT1 BIDIR>;
140 scl = <&pio4 5 ALT1 BIDIR>;
141 };
142 };
143 };
144
145 i2c11 {
146 pinctrl_i2c11_default: i2c11-default {
147 st,pins {
148 sda = <&pio5 1 ALT1 BIDIR>;
149 scl = <&pio5 0 ALT1 BIDIR>;
150 };
151 };
152 };
153
154 keyscan {
155 pinctrl_keyscan: keyscan {
156 st,pins {
157 keyin0 = <&pio4 0 ALT6 IN>;
158 keyin1 = <&pio4 5 ALT4 IN>;
159 keyin2 = <&pio0 4 ALT2 IN>;
160 keyin3 = <&pio2 6 ALT2 IN>;
161
162 keyout0 = <&pio4 6 ALT4 OUT>;
163 keyout1 = <&pio1 7 ALT2 OUT>;
164 keyout2 = <&pio0 6 ALT2 OUT>;
165 keyout3 = <&pio2 7 ALT2 OUT>;
166 };
167 };
168 };
169
170 gmac1 {
171 /*
172 * Almost all the boards based on STiH407 SoC have an embedded
173 * switch where the mdio/mdc have been used for managing the SMI
174 * iface via I2C. For this reason these lines can be allocated
175 * by using dedicated configuration (in case of there will be a
176 * standard PHY transceiver on-board).
177 */
178 pinctrl_rgmii1: rgmii1-0 {
179 st,pins {
180
181 txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
182 txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
183 txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
184 txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
185 txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
186 txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
187 rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
188 rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
189 rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
190 rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
191 rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
192 rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
193 clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
194 phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
195 };
196 };
197
198 pinctrl_rgmii1_mdio: rgmii1-mdio {
199 st,pins {
200 mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
201 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
202 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
203 };
204 };
205
206 pinctrl_mii1: mii1 {
207 st,pins {
208 txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
209 txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
210 txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
211 txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
212 txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
213 txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
214 txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
215 col = <&pio0 7 ALT1 IN BYPASS 1000>;
216
217 mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
218 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
219 crs = <&pio1 2 ALT1 IN BYPASS 1000>;
220 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
221 rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
222 rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
223 rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
224 rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
225
226 rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
227 rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
228 rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
229 phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
230 };
231 };
232 };
233
234 pwm1 {
235 pinctrl_pwm1_chan0_default: pwm1-0-default {
236 st,pins {
237 pwm-out = <&pio3 0 ALT1 OUT>;
238 };
239 };
240 pinctrl_pwm1_chan1_default: pwm1-1-default {
241 st,pins {
242 pwm-out = <&pio4 4 ALT1 OUT>;
243 };
244 };
245 pinctrl_pwm1_chan2_default: pwm1-2-default {
246 st,pins {
247 pwm-out = <&pio4 6 ALT3 OUT>;
248 };
249 };
250 pinctrl_pwm1_chan3_default: pwm1-3-default {
251 st,pins {
252 pwm-out = <&pio4 7 ALT3 OUT>;
253 };
254 };
255 };
256 };
257
258 pin-controller-front0 {
259 #address-cells = <1>;
260 #size-cells = <1>;
261 compatible = "st,stih407-front-pinctrl";
262 st,syscfg = <&syscfg_front>;
263 reg = <0x0920f080 0x4>;
264 reg-names = "irqmux";
265 interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
266 interrupts-names = "irqmux";
267 ranges = <0 0x09200000 0x10000>;
268
269 pio10: pio@09200000 {
270 gpio-controller;
271 #gpio-cells = <1>;
272 interrupt-controller;
273 #interrupt-cells = <2>;
274 reg = <0x0 0x100>;
275 st,bank-name = "PIO10";
276 };
277 pio11: pio@09201000 {
278 gpio-controller;
279 #gpio-cells = <1>;
280 interrupt-controller;
281 #interrupt-cells = <2>;
282 reg = <0x1000 0x100>;
283 st,bank-name = "PIO11";
284 };
285 pio12: pio@09202000 {
286 gpio-controller;
287 #gpio-cells = <1>;
288 interrupt-controller;
289 #interrupt-cells = <2>;
290 reg = <0x2000 0x100>;
291 st,bank-name = "PIO12";
292 };
293 pio13: pio@09203000 {
294 gpio-controller;
295 #gpio-cells = <1>;
296 interrupt-controller;
297 #interrupt-cells = <2>;
298 reg = <0x3000 0x100>;
299 st,bank-name = "PIO13";
300 };
301 pio14: pio@09204000 {
302 gpio-controller;
303 #gpio-cells = <1>;
304 interrupt-controller;
305 #interrupt-cells = <2>;
306 reg = <0x4000 0x100>;
307 st,bank-name = "PIO14";
308 };
309 pio15: pio@09205000 {
310 gpio-controller;
311 #gpio-cells = <1>;
312 interrupt-controller;
313 #interrupt-cells = <2>;
314 reg = <0x5000 0x100>;
315 st,bank-name = "PIO15";
316 };
317 pio16: pio@09206000 {
318 gpio-controller;
319 #gpio-cells = <1>;
320 interrupt-controller;
321 #interrupt-cells = <2>;
322 reg = <0x6000 0x100>;
323 st,bank-name = "PIO16";
324 };
325 pio17: pio@09207000 {
326 gpio-controller;
327 #gpio-cells = <1>;
328 interrupt-controller;
329 #interrupt-cells = <2>;
330 reg = <0x7000 0x100>;
331 st,bank-name = "PIO17";
332 };
333 pio18: pio@09208000 {
334 gpio-controller;
335 #gpio-cells = <1>;
336 interrupt-controller;
337 #interrupt-cells = <2>;
338 reg = <0x8000 0x100>;
339 st,bank-name = "PIO18";
340 };
341 pio19: pio@09209000 {
342 gpio-controller;
343 #gpio-cells = <1>;
344 interrupt-controller;
345 #interrupt-cells = <2>;
346 reg = <0x9000 0x100>;
347 st,bank-name = "PIO19";
348 };
349
350 /* Comms */
351 serial0 {
352 pinctrl_serial0: serial0-0 {
353 st,pins {
354 tx = <&pio17 0 ALT1 OUT>;
355 rx = <&pio17 1 ALT1 IN>;
356 };
357 };
358 };
359
360 serial1 {
361 pinctrl_serial1: serial1-0 {
362 st,pins {
363 tx = <&pio16 0 ALT1 OUT>;
364 rx = <&pio16 1 ALT1 IN>;
365 };
366 };
367 };
368
369 serial2 {
370 pinctrl_serial2: serial2-0 {
371 st,pins {
372 tx = <&pio15 0 ALT1 OUT>;
373 rx = <&pio15 1 ALT1 IN>;
374 };
375 };
376 };
377
378 mmc1 {
379 pinctrl_sd1: sd1-0 {
380 st,pins {
381 sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
382 sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
383 sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
384 sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
385 sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
386 sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
387 sd_led = <&pio16 6 ALT6 OUT>;
388 sd_pwren = <&pio16 7 ALT6 OUT>;
389 sd_cd = <&pio19 0 ALT6 IN>;
390 sd_wp = <&pio19 1 ALT6 IN>;
391 };
392 };
393 };
394
395
396 i2c0 {
397 pinctrl_i2c0_default: i2c0-default {
398 st,pins {
399 sda = <&pio10 6 ALT2 BIDIR>;
400 scl = <&pio10 5 ALT2 BIDIR>;
401 };
402 };
403 };
404
405 i2c1 {
406 pinctrl_i2c1_default: i2c1-default {
407 st,pins {
408 sda = <&pio11 1 ALT2 BIDIR>;
409 scl = <&pio11 0 ALT2 BIDIR>;
410 };
411 };
412 };
413
414 i2c2 {
415 pinctrl_i2c2_default: i2c2-default {
416 st,pins {
417 sda = <&pio15 6 ALT2 BIDIR>;
418 scl = <&pio15 5 ALT2 BIDIR>;
419 };
420 };
421 };
422
423 i2c3 {
424 pinctrl_i2c3_default: i2c3-default {
425 st,pins {
426 sda = <&pio18 6 ALT1 BIDIR>;
427 scl = <&pio18 5 ALT1 BIDIR>;
428 };
429 };
430 };
431
432 spi0 {
433 pinctrl_spi0_default: spi0-default {
434 st,pins {
435 mtsr = <&pio12 6 ALT2 BIDIR>;
436 mrst = <&pio12 7 ALT2 BIDIR>;
437 scl = <&pio12 5 ALT2 BIDIR>;
438 };
439 };
440 };
441 };
442
443 pin-controller-front1 {
444 #address-cells = <1>;
445 #size-cells = <1>;
446 compatible = "st,stih407-front-pinctrl";
447 st,syscfg = <&syscfg_front>;
448 reg = <0x0921f080 0x4>;
449 reg-names = "irqmux";
450 interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
451 interrupts-names = "irqmux";
452 ranges = <0 0x09210000 0x10000>;
453
454 pio20: pio@09210000 {
455 gpio-controller;
456 #gpio-cells = <1>;
457 interrupt-controller;
458 #interrupt-cells = <2>;
459 reg = <0x0 0x100>;
460 st,bank-name = "PIO20";
461 };
462 };
463
464 pin-controller-rear {
465 #address-cells = <1>;
466 #size-cells = <1>;
467 compatible = "st,stih407-rear-pinctrl";
468 st,syscfg = <&syscfg_rear>;
469 reg = <0x0922f080 0x4>;
470 reg-names = "irqmux";
471 interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
472 interrupts-names = "irqmux";
473 ranges = <0 0x09220000 0x6000>;
474
475 pio30: gpio@09220000 {
476 gpio-controller;
477 #gpio-cells = <1>;
478 interrupt-controller;
479 #interrupt-cells = <2>;
480 reg = <0x0 0x100>;
481 st,bank-name = "PIO30";
482 };
483 pio31: gpio@09221000 {
484 gpio-controller;
485 #gpio-cells = <1>;
486 interrupt-controller;
487 #interrupt-cells = <2>;
488 reg = <0x1000 0x100>;
489 st,bank-name = "PIO31";
490 };
491 pio32: gpio@09222000 {
492 gpio-controller;
493 #gpio-cells = <1>;
494 interrupt-controller;
495 #interrupt-cells = <2>;
496 reg = <0x2000 0x100>;
497 st,bank-name = "PIO32";
498 };
499 pio33: gpio@09223000 {
500 gpio-controller;
501 #gpio-cells = <1>;
502 interrupt-controller;
503 #interrupt-cells = <2>;
504 reg = <0x3000 0x100>;
505 st,bank-name = "PIO33";
506 };
507 pio34: gpio@09224000 {
508 gpio-controller;
509 #gpio-cells = <1>;
510 interrupt-controller;
511 #interrupt-cells = <2>;
512 reg = <0x4000 0x100>;
513 st,bank-name = "PIO34";
514 };
515 pio35: gpio@09225000 {
516 gpio-controller;
517 #gpio-cells = <1>;
518 interrupt-controller;
519 #interrupt-cells = <2>;
520 reg = <0x5000 0x100>;
521 st,bank-name = "PIO35";
522 };
523
524 i2c4 {
525 pinctrl_i2c4_default: i2c4-default {
526 st,pins {
527 sda = <&pio30 1 ALT1 BIDIR>;
528 scl = <&pio30 0 ALT1 BIDIR>;
529 };
530 };
531 };
532
533 i2c5 {
534 pinctrl_i2c5_default: i2c5-default {
535 st,pins {
536 sda = <&pio34 4 ALT1 BIDIR>;
537 scl = <&pio34 3 ALT1 BIDIR>;
538 };
539 };
540 };
541
542 usb3 {
543 pinctrl_usb3: usb3-2 {
544 st,pins {
545 usb-oc-detect = <&pio35 4 ALT1 IN>;
546 usb-pwr-enable = <&pio35 5 ALT1 OUT>;
547 usb-vbus-valid = <&pio35 6 ALT1 IN>;
548 };
549 };
550 };
551
552 pwm0 {
553 pinctrl_pwm0_chan0_default: pwm0-0-default {
554 st,pins {
555 pwm-out = <&pio31 1 ALT1 OUT>;
556 };
557 };
558 };
559 };
560
561 pin-controller-flash {
562 #address-cells = <1>;
563 #size-cells = <1>;
564 compatible = "st,stih407-flash-pinctrl";
565 st,syscfg = <&syscfg_flash>;
566 reg = <0x0923f080 0x4>;
567 reg-names = "irqmux";
568 interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
569 interrupts-names = "irqmux";
570 ranges = <0 0x09230000 0x3000>;
571
572 pio40: gpio@09230000 {
573 gpio-controller;
574 #gpio-cells = <1>;
575 interrupt-controller;
576 #interrupt-cells = <2>;
577 reg = <0 0x100>;
578 st,bank-name = "PIO40";
579 };
580 pio41: gpio@09231000 {
581 gpio-controller;
582 #gpio-cells = <1>;
583 interrupt-controller;
584 #interrupt-cells = <2>;
585 reg = <0x1000 0x100>;
586 st,bank-name = "PIO41";
587 };
588 pio42: gpio@09232000 {
589 gpio-controller;
590 #gpio-cells = <1>;
591 interrupt-controller;
592 #interrupt-cells = <2>;
593 reg = <0x2000 0x100>;
594 st,bank-name = "PIO42";
595 };
596
597 mmc0 {
598 pinctrl_mmc0: mmc0-0 {
599 st,pins {
600 emmc_clk = <&pio40 6 ALT1 BIDIR>;
601 emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
602 emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
603 emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
604 emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
605 emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
606 emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
607 emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
608 emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
609 emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
610 };
611 };
612 };
613 };
614 };
615};