Akinobu Mita | efc945f | 2016-02-07 18:14:16 +0900 | [diff] [blame] | 1 | /* |
| 2 | * ADC0831/ADC0832/ADC0834/ADC0838 8-bit ADC driver |
| 3 | * |
| 4 | * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com> |
| 5 | * |
| 6 | * This file is subject to the terms and conditions of version 2 of |
| 7 | * the GNU General Public License. See the file COPYING in the main |
| 8 | * directory of this archive for more details. |
| 9 | * |
| 10 | * Datasheet: http://www.ti.com/lit/ds/symlink/adc0832-n.pdf |
| 11 | */ |
| 12 | |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/spi/spi.h> |
| 15 | #include <linux/iio/iio.h> |
| 16 | #include <linux/regulator/consumer.h> |
| 17 | |
| 18 | enum { |
| 19 | adc0831, |
| 20 | adc0832, |
| 21 | adc0834, |
| 22 | adc0838, |
| 23 | }; |
| 24 | |
| 25 | struct adc0832 { |
| 26 | struct spi_device *spi; |
| 27 | struct regulator *reg; |
| 28 | struct mutex lock; |
| 29 | u8 mux_bits; |
| 30 | |
| 31 | u8 tx_buf[2] ____cacheline_aligned; |
| 32 | u8 rx_buf[2]; |
| 33 | }; |
| 34 | |
| 35 | #define ADC0832_VOLTAGE_CHANNEL(chan) \ |
| 36 | { \ |
| 37 | .type = IIO_VOLTAGE, \ |
| 38 | .indexed = 1, \ |
| 39 | .channel = chan, \ |
| 40 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| 41 | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ |
| 42 | } |
| 43 | |
| 44 | #define ADC0832_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \ |
| 45 | { \ |
| 46 | .type = IIO_VOLTAGE, \ |
| 47 | .indexed = 1, \ |
| 48 | .channel = (chan1), \ |
| 49 | .channel2 = (chan2), \ |
| 50 | .differential = 1, \ |
| 51 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| 52 | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ |
| 53 | } |
| 54 | |
| 55 | static const struct iio_chan_spec adc0831_channels[] = { |
| 56 | ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), |
| 57 | }; |
| 58 | |
| 59 | static const struct iio_chan_spec adc0832_channels[] = { |
| 60 | ADC0832_VOLTAGE_CHANNEL(0), |
| 61 | ADC0832_VOLTAGE_CHANNEL(1), |
| 62 | ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), |
| 63 | ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), |
| 64 | }; |
| 65 | |
| 66 | static const struct iio_chan_spec adc0834_channels[] = { |
| 67 | ADC0832_VOLTAGE_CHANNEL(0), |
| 68 | ADC0832_VOLTAGE_CHANNEL(1), |
| 69 | ADC0832_VOLTAGE_CHANNEL(2), |
| 70 | ADC0832_VOLTAGE_CHANNEL(3), |
| 71 | ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), |
| 72 | ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), |
| 73 | ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3), |
| 74 | ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2), |
| 75 | }; |
| 76 | |
| 77 | static const struct iio_chan_spec adc0838_channels[] = { |
| 78 | ADC0832_VOLTAGE_CHANNEL(0), |
| 79 | ADC0832_VOLTAGE_CHANNEL(1), |
| 80 | ADC0832_VOLTAGE_CHANNEL(2), |
| 81 | ADC0832_VOLTAGE_CHANNEL(3), |
| 82 | ADC0832_VOLTAGE_CHANNEL(4), |
| 83 | ADC0832_VOLTAGE_CHANNEL(5), |
| 84 | ADC0832_VOLTAGE_CHANNEL(6), |
| 85 | ADC0832_VOLTAGE_CHANNEL(7), |
| 86 | ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), |
| 87 | ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), |
| 88 | ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3), |
| 89 | ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2), |
| 90 | ADC0832_VOLTAGE_CHANNEL_DIFF(4, 5), |
| 91 | ADC0832_VOLTAGE_CHANNEL_DIFF(5, 4), |
| 92 | ADC0832_VOLTAGE_CHANNEL_DIFF(6, 7), |
| 93 | ADC0832_VOLTAGE_CHANNEL_DIFF(7, 6), |
| 94 | }; |
| 95 | |
| 96 | static int adc0831_adc_conversion(struct adc0832 *adc) |
| 97 | { |
| 98 | struct spi_device *spi = adc->spi; |
| 99 | int ret; |
| 100 | |
| 101 | ret = spi_read(spi, &adc->rx_buf, 2); |
| 102 | if (ret) |
| 103 | return ret; |
| 104 | |
| 105 | /* |
| 106 | * Skip TRI-STATE and a leading zero |
| 107 | */ |
| 108 | return (adc->rx_buf[0] << 2 & 0xff) | (adc->rx_buf[1] >> 6); |
| 109 | } |
| 110 | |
| 111 | static int adc0832_adc_conversion(struct adc0832 *adc, int channel, |
| 112 | bool differential) |
| 113 | { |
| 114 | struct spi_device *spi = adc->spi; |
| 115 | struct spi_transfer xfer = { |
| 116 | .tx_buf = adc->tx_buf, |
| 117 | .rx_buf = adc->rx_buf, |
| 118 | .len = 2, |
| 119 | }; |
| 120 | int ret; |
| 121 | |
| 122 | if (!adc->mux_bits) |
| 123 | return adc0831_adc_conversion(adc); |
| 124 | |
| 125 | /* start bit */ |
| 126 | adc->tx_buf[0] = 1 << (adc->mux_bits + 1); |
| 127 | /* single-ended or differential */ |
| 128 | adc->tx_buf[0] |= differential ? 0 : (1 << adc->mux_bits); |
| 129 | /* odd / sign */ |
| 130 | adc->tx_buf[0] |= (channel % 2) << (adc->mux_bits - 1); |
| 131 | /* select */ |
| 132 | if (adc->mux_bits > 1) |
| 133 | adc->tx_buf[0] |= channel / 2; |
| 134 | |
| 135 | /* align Data output BIT7 (MSB) to 8-bit boundary */ |
| 136 | adc->tx_buf[0] <<= 1; |
| 137 | |
| 138 | ret = spi_sync_transfer(spi, &xfer, 1); |
| 139 | if (ret) |
| 140 | return ret; |
| 141 | |
| 142 | return adc->rx_buf[1]; |
| 143 | } |
| 144 | |
| 145 | static int adc0832_read_raw(struct iio_dev *iio, |
| 146 | struct iio_chan_spec const *channel, int *value, |
| 147 | int *shift, long mask) |
| 148 | { |
| 149 | struct adc0832 *adc = iio_priv(iio); |
| 150 | |
| 151 | switch (mask) { |
| 152 | case IIO_CHAN_INFO_RAW: |
| 153 | mutex_lock(&adc->lock); |
| 154 | *value = adc0832_adc_conversion(adc, channel->channel, |
| 155 | channel->differential); |
| 156 | mutex_unlock(&adc->lock); |
| 157 | if (*value < 0) |
| 158 | return *value; |
| 159 | |
| 160 | return IIO_VAL_INT; |
| 161 | case IIO_CHAN_INFO_SCALE: |
| 162 | *value = regulator_get_voltage(adc->reg); |
| 163 | if (*value < 0) |
| 164 | return *value; |
| 165 | |
| 166 | /* convert regulator output voltage to mV */ |
| 167 | *value /= 1000; |
| 168 | *shift = 8; |
| 169 | |
| 170 | return IIO_VAL_FRACTIONAL_LOG2; |
| 171 | } |
| 172 | |
| 173 | return -EINVAL; |
| 174 | } |
| 175 | |
| 176 | static const struct iio_info adc0832_info = { |
| 177 | .read_raw = adc0832_read_raw, |
| 178 | .driver_module = THIS_MODULE, |
| 179 | }; |
| 180 | |
| 181 | static int adc0832_probe(struct spi_device *spi) |
| 182 | { |
| 183 | struct iio_dev *indio_dev; |
| 184 | struct adc0832 *adc; |
| 185 | int ret; |
| 186 | |
| 187 | indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); |
| 188 | if (!indio_dev) |
| 189 | return -ENOMEM; |
| 190 | |
| 191 | adc = iio_priv(indio_dev); |
| 192 | adc->spi = spi; |
| 193 | mutex_init(&adc->lock); |
| 194 | |
| 195 | indio_dev->name = spi_get_device_id(spi)->name; |
| 196 | indio_dev->dev.parent = &spi->dev; |
| 197 | indio_dev->info = &adc0832_info; |
| 198 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 199 | |
| 200 | switch (spi_get_device_id(spi)->driver_data) { |
| 201 | case adc0831: |
| 202 | adc->mux_bits = 0; |
| 203 | indio_dev->channels = adc0831_channels; |
| 204 | indio_dev->num_channels = ARRAY_SIZE(adc0831_channels); |
| 205 | break; |
| 206 | case adc0832: |
| 207 | adc->mux_bits = 1; |
| 208 | indio_dev->channels = adc0832_channels; |
| 209 | indio_dev->num_channels = ARRAY_SIZE(adc0832_channels); |
| 210 | break; |
| 211 | case adc0834: |
| 212 | adc->mux_bits = 2; |
| 213 | indio_dev->channels = adc0834_channels; |
| 214 | indio_dev->num_channels = ARRAY_SIZE(adc0834_channels); |
| 215 | break; |
| 216 | case adc0838: |
| 217 | adc->mux_bits = 3; |
| 218 | indio_dev->channels = adc0838_channels; |
| 219 | indio_dev->num_channels = ARRAY_SIZE(adc0838_channels); |
| 220 | break; |
| 221 | default: |
| 222 | return -EINVAL; |
| 223 | } |
| 224 | |
| 225 | adc->reg = devm_regulator_get(&spi->dev, "vref"); |
| 226 | if (IS_ERR(adc->reg)) |
| 227 | return PTR_ERR(adc->reg); |
| 228 | |
| 229 | ret = regulator_enable(adc->reg); |
| 230 | if (ret) |
| 231 | return ret; |
| 232 | |
| 233 | spi_set_drvdata(spi, indio_dev); |
| 234 | |
| 235 | ret = iio_device_register(indio_dev); |
| 236 | if (ret) |
| 237 | regulator_disable(adc->reg); |
| 238 | |
| 239 | return ret; |
| 240 | } |
| 241 | |
| 242 | static int adc0832_remove(struct spi_device *spi) |
| 243 | { |
| 244 | struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| 245 | struct adc0832 *adc = iio_priv(indio_dev); |
| 246 | |
| 247 | iio_device_unregister(indio_dev); |
| 248 | regulator_disable(adc->reg); |
| 249 | |
| 250 | return 0; |
| 251 | } |
| 252 | |
| 253 | #ifdef CONFIG_OF |
| 254 | |
| 255 | static const struct of_device_id adc0832_dt_ids[] = { |
| 256 | { .compatible = "ti,adc0831", }, |
| 257 | { .compatible = "ti,adc0832", }, |
| 258 | { .compatible = "ti,adc0834", }, |
| 259 | { .compatible = "ti,adc0838", }, |
| 260 | {} |
| 261 | }; |
| 262 | MODULE_DEVICE_TABLE(of, adc0832_dt_ids); |
| 263 | |
| 264 | #endif |
| 265 | |
| 266 | static const struct spi_device_id adc0832_id[] = { |
| 267 | { "adc0831", adc0831 }, |
| 268 | { "adc0832", adc0832 }, |
| 269 | { "adc0834", adc0834 }, |
| 270 | { "adc0838", adc0838 }, |
| 271 | {} |
| 272 | }; |
| 273 | MODULE_DEVICE_TABLE(spi, adc0832_id); |
| 274 | |
| 275 | static struct spi_driver adc0832_driver = { |
| 276 | .driver = { |
| 277 | .name = "adc0832", |
| 278 | .of_match_table = of_match_ptr(adc0832_dt_ids), |
| 279 | }, |
| 280 | .probe = adc0832_probe, |
| 281 | .remove = adc0832_remove, |
| 282 | .id_table = adc0832_id, |
| 283 | }; |
| 284 | module_spi_driver(adc0832_driver); |
| 285 | |
| 286 | MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>"); |
| 287 | MODULE_DESCRIPTION("ADC0831/ADC0832/ADC0834/ADC0838 driver"); |
| 288 | MODULE_LICENSE("GPL v2"); |